helm_version:
description: helm version to be installed
- default: v2.8.2
+ default: v2.9.1
dsl_definitions:
.. table:: OOM Software Requirements
- ============== ========== ===== ======= ========
- Release Kubernetes Helm kubectl Docker
- ============== ========== ===== ======= ========
- amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
- beijing/master 1.8.10 2.8.2 1.8.10 17.03.x
- ============== ========== ===== ======= ========
+ ============== ========== ===== ======= ========
+ Release Kubernetes Helm kubectl Docker
+ ============== ========== ===== ======= ========
+ amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
+ beijing 1.8.10 2.8.2 1.8.10 17.03.x
+ casablanca/master 1.8.10 2.9.1 1.8.10 17.03.x
+ ============== ========== ===== ======= ========
Minimum Hardware Configuration
==============================
will be displayed::
ubuntu@sb4-k8s-1:~$ helm list
- Error: incompatible versions c1ient[v2.8.2] server[v2.6.1]
+ Error: incompatible versions c1ient[v2.9.1] server[v2.6.1]
ubuntu@sb4-k8s-1:~$
7. Upgrade the server-side component of helm (tiller) via `helm init --upgrade`::
~~~~~~~~~~~~
Helm is used by OOM for package and configuration management. To install Helm, enter the following::
- > wget http://storage.googleapis.com/kubernetes-helm/helm-v2.8.2-linux-amd64.tar.gz
- > tar -zxvf helm-v2.8.2-linux-amd64.tar.gz
+ > wget http://storage.googleapis.com/kubernetes-helm/helm-v2.9.1-linux-amd64.tar.gz
+ > tar -zxvf helm-v2.9.1-linux-amd64.tar.gz
> sudo mv linux-amd64/helm /usr/local/bin/helm
Verify the Helm version with::
DOCKER_VERSION=17.03
KUBECTL_VERSION=1.8.10
-HELM_VERSION=2.8.2
+HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
#!/bin/bash
DOCKER_VERSION=17.03
-RANCHER_VERSION=1.6.14
+RANCHER_VERSION=1.6.18
KUBECTL_VERSION=1.8.10
-HELM_VERSION=2.8.2
+HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:2.0.0
+image: onap/aaf/smsquorumclient:latest
pullPolicy: Always
# flag to enable debugging - application support required
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
+ initContainers:
+ - image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "aaf-sms-vault"
+ - --container-name
+ - "aaf-sms-vault-backend"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
containers:
- image: "{{ include "common.repository" . }}/{{ .Values.image }}"
- name: {{ include "common.name" . }}
imagePullPolicy: {{ .Values.pullPolicy }}
+ name: {{ include "common.name" . }}
command: ["/sms/bin/sms"]
workingDir: /sms/
ports:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms:2.0.0
+image: onap/aaf/sms:latest
pullPolicy: Always
# flag to enable debugging - application support required
--- /dev/null
+"dynamic_templates":[
+ {
+ "strings":{
+ "match_mapping_type":"string",
+ "match": "*",
+ "mapping":{
+ "type":"text",
+ "fielddata":true
+ }
+ }
+ }
+],
--- /dev/null
+{
+ "attr-translations": [
+ {
+ "from": "\"type\":\"string\",\"index\":\"analyzed\"",
+ "to": "\"type\":\"text\",\"index\":\"true\""
+ },
+ {
+ "from": "\"type\":\"string\",\"index\":\"not_analyzed\"",
+ "to": "\"type\":\"keyword\",\"index\":\"true\""
+ },
+ {
+ "from": "\"type\":\"string\"",
+ "to": "\"type\":\"text\""
+ },
+ {
+ "from": "searchable",
+ "to": "index"
+ }
+ ]
+}
\ No newline at end of file
subPath: elastic-search.properties
name: {{ include "common.fullname" . }}-service-config
- mountPath: /opt/app/search-data-service/config/analysis-config.json
- subPath: filter-config.json
+ subPath: analysis-config.json
+ name: {{ include "common.fullname" . }}-service-config
+ - mountPath: /opt/app/search-data-service/config/es-payload-translation.json
+ subPath: es-payload-translation.json
+ name: {{ include "common.fullname" . }}-service-config
+ - mountPath: /opt/app/search-data-service/config/dynamic-custom-template.json
+ subPath: dynamic-custom-template.json
name: {{ include "common.fullname" . }}-service-config
- mountPath: /opt/app/search-data-service/config/auth/tomcat_keystore
subPath: tomcat_keystore
metadata:
labels:
app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
name: {{ .Release.Name }}
spec:
initContainers:
-# technical_user:
-# api_token: 0123456789technicaluser789abcdef01234567 # must be looooong!
-# reader:
-# password: reader
-# writer:
-# password: writer
+onap:
+ first_name: Steve
+ last_name: McQueen
+ email: steve.mcqueen@onap.org
+ password: onap123$
+ api_token: onceuponatimeiplayedwithnetbox20180814
+ is_staff: true # whether user is admin or not, default = false
+ is_active: true # whether user is active, default = true
+ is_superuser: true # Whether user has all edit rights or not, default = false
\ No newline at end of file
--- /dev/null
+#!/bin/bash
+
+# Create region
+
+echo "Create region: RegionOne"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/dcim/regions/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "RegionOne",
+ "slug": "RegionOne"
+}'
+
+# Create tenant group
+
+echo "Create tenant group: ONAP group"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/tenancy/tenant-groups/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "ONAP group",
+ "slug": "onap-group"
+}'
+
+# Create tenant
+
+echo "Create tenant ONAP in ONAP group"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/tenancy/tenants/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "ONAP",
+ "slug": "onap",
+ "group": 1,
+ "description": "ONAP tenant",
+ "comments": "Tenant for ONAP demo use cases"
+}'
+
+# Create site
+
+echo "Create ONAP demo site: Montreal Lab"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/dcim/sites/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "Montreal Lab D3",
+ "slug": "mtl-lab-d3",
+ "region": 1,
+ "tenant": 1,
+ "facility": "Campus",
+ "time_zone": "Canada/Atlantic",
+ "description": "Site hosting the ONAP use cases",
+ "physical_address": "1 Graham Bell",
+ "shipping_address": "1 Graham Bell",
+ "contact_name": "Alexis",
+ "contact_phone": "0000000000",
+ "contact_email": "adetalhouet89@gmail.com",
+ "comments": "ONAP lab"
+}'
+
+# Create prefixes
+
+echo "Create Prefix for vFW protected network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "192.168.20.0/24",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for protected network - vFW use case"
+}'
+
+echo "Create Prefix for vFW unprotected network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "192.168.10.0/24",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for unprotected network - vFW use case"
+}'
+
+echo "Create Prefix for ONAP general purpose network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "10.0.0.0/8",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for ONAP - general purpose"
+}'
if not User.objects.filter(username=username):
user = User.objects.create_user(
username = username,
- password = user_details.get('password', 0) or User.objects.make_random_password)
+ password = user_details.get('password', 0) or User.objects.make_random_password,
+ is_staff = user_details.get('is_staff', 0) or false,
+ is_superuser = user_details.get('is_superuser', 0) or false,
+ is_active = user_details.get('is_active', 0) or true,
+ first_name = user_details.get('first_name', 0),
+ last_name = user_details.get('last_name', 0),
+ email = user_details.get('email', 0))
print("👤 Created user ",username)
if user_details.get('api_token', 0):
- Token.objects.create(user=user, key=user_details['api_token'])
+ Token.objects.create(user=user, key=user_details['api_token'])
\ No newline at end of file
# limitations under the License.
*/}}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-provisioning-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/provisioning/*").AsConfig . | indent 2 }}
+---
apiVersion: v1
kind: ConfigMap
metadata:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /api/dcim/regions/
+ port: {{ .Values.service.internalPort }}
+ scheme: HTTP
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
env:
- name: DB_PASSWORD
valueFrom:
--- /dev/null
+# Copyright © 2018 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+ name: {{ include "common.fullname" . }}-provisioning
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}-job
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ backoffLimit: 5
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}-provisioning-job
+ release: {{ .Release.Name }}
+ spec:
+ restartPolicy: Never
+ initContainers:
+ - name: {{ include "common.name" . }}-init-readiness
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - netbox-app
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}-provisioning-job
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-provisioning
+ mountPath: /tmp
+ command:
+ - /bin/bash
+ - ./tmp/provision.sh
+ volumes:
+ - name: {{ include "common.fullname" . }}-provisioning
+ configMap:
+ name: {{ include "common.fullname" . }}-provisioning-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Never
napalmTimeout: 10
maxPageSize: 0
superuserName: admin
- superuserEmail: admin@example.com
+ superuserEmail: admin@onap.org
repository: docker.io
image: ninech/netbox:v2.3.5
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
service:
type: ClusterIP
name: netbox-app
global:
nodePortPrefix: 302
commonConfigPrefix: netbox
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
dependencies:
- name: common
version: ~2.0.0
- repository: '@local'
\ No newline at end of file
+ repository: '@local'
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#!/bin/bash
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
dependencies:
- name: common
version: ~2.0.0
# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Service Dependencies
message-router depends on AAF
-dbc-api depends on AAF and Postgresql.
\ No newline at end of file
+dbc-api depends on AAF and Postgresql.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
# Helm Chart for ONAP DMaaP Applications
ONAP includes the following Kubernetes services available in ONAP Beijing Release (more expected in future):
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
DMAAPBC_WAIT_TO_EXIT=Y
DMAAPBC_PG_ENABLED=true
# Need to connect to PG primary service, designated by service.name2
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{- end}}
selector:
app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
\ No newline at end of file
+ release: {{ .Release.Name }}
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
sources:
- https://gerrit.onap.org/r/#/admin/projects/
icon: https://wiki.onap.org/download/thumbnails/1015829/onap_704x271%20copy.png?version=1&modificationDate=1488326334000&api=v2
-tillerVersion: "~2.8.2"
+tillerVersion: "~2.9.1"
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# ONAP
# ================================================================================
# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# ONAP
# ================================================================================
# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright 2018 AT&T Intellectual Property. All rights reserved
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada, AT&T
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
filebeat.prospectors:
#it is mandatory, in our case it's log
- input_type: log
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
nameOverride: brmsgw
nexus:
nameOverride: nexus
- policy-apex-pdp:
- nameOverride: policy-apex-pdp
#################################################################
# Application configuration defaults.
nameOverride: brmsgw
nexus:
nameOverride: nexus
-policy-apex-pdp:
- nameOverride: policy-apex-pdp
# flag to enable debugging - application support required
debugEnabled: false
# limitations under the License.
apiVersion: v1
-description: ONAP Activity Spec WebService
-name: sdc-act
-version: 2.0.0
\ No newline at end of file
+description: ONAP POMBA SDC Context Builder
+name: pomba-sdcctxbuilder
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+This directory contains all external configuration files that
+need to be mounted into an application container.
+
+See the configmap.yaml in the templates directory for an example
+of how to load (ie map) config files from this directory, into
+Kubernetes, for distribution within the k8s cluster.
+
+See deployment.yaml in the templates directory for an example
+of how the 'config mapped' files are then mounted into the
+containers.
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+server.contextPath=/sdccontextbuilder
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#server.port=9191
+
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+#Application properties
+sdcConnect.username={{ .Values.config.sdcUsername }}
+sdcConnect.password={{ .Values.config.sdcPassword }}
+sdcConnect.consumerID={{ .Values.config.sdcConsumerId }}
+sdcConnect.sdcAddress={{ .Values.config.sdcServiceName }}.{{.Release.Namespace}}:{{ .Values.config.sdcPort }}
+
+# Minimum timeout value is 15 seconds; default is 120000s
+sdcConnect.timeout.seconds=12000
+
+# {0} = UUID
+sdc.url.template=/sdc/v1/catalog/services/{0}/toscaModel
+sdc.artifact.type=TOSCA_CSAR
+
+# Intended name for downloaded temporary CSAR files: csar-[UUID].zip
+# Only .zip and .csar are accepted extensions, default is .zip
+sdc.csar.file.prefix=csar-
+sdc.csar.file.suffix=.zip
+
+# HTTP Basic Authorization credentials for Rest Service API
+http.userId={{ .Values.config.sdcCtxBuilderUserId }}
+http.password={{ .Values.config.sdcCtxBuilderPassword }}
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+
+#test.tosca.csar.file=\\config\\toscaModel.csar.zip
name: {{ include "common.fullname" . }}-configmap
namespace: {{ include "common.namespace" . }}
data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+# readinessRepository: oomk8s
+# readinessImage: readiness-check:2.0.0
+# loggingRepository: docker.elastic.co
+# loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/pomba-sdc-context-builder:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ #Application properties
+ sdcUsername: pomba
+ sdcPassword: OBF:1uha1uh81w8v1ugi1ugg
+ sdcConsumerId: pomba
+ sdcServiceName: sdc-be
+ sdcPort: 30204
+ # HTTP Basic Authorization credentials for Rest Service API
+ sdcCtxBuilderUserId: admin
+ sdcCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9530
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
if i.status.container_statuses is None:
continue
for s in i.status.container_statuses:
- if s.name == container_name:
+ if i.metadata.owner_references[0].kind == "StatefulSet":
+ if i.metadata.name == container_name:
+ ready = s.ready
+ if not ready:
+ log.info(container_name + " is not ready.")
+ else:
+ log.info(container_name + " is ready!")
+ else:
+ continue
+ elif s.name == container_name:
ready = s.ready
if not ready:
log.info(container_name + " is not ready.")
+++ /dev/null
-cassandraConfig:
- cassandraHosts: {{ .Values.config.cassandraHosts }}
- reconnectTimeout : {{ .Values.config.cassandraReconnectTimeout }}
- socketReadTimeout: {{ .Values.config.cassandraSocketReadTimeout }}
- socketConnectTimeout: {{ .Values.config.cassandraSocketConnectTimeout }}
- authenticate: true
- username: {{ .Values.config.cassandraUserName }}
- password: {{ .Values.config.cassandraUserPassword }}
- ssl: {{ .Values.config.cassandraSslEnabled }}
- truststorePath : {{ .Values.config.cassandraTruststorePath }}
- truststorePassword : {{ .Values.config.cassandraTruststorePassword }}
-
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Service Design and Creation Workflow Designer backend
+name: sdc-wfd-be
+version: 2.0.0
\ No newline at end of file
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
- /root/job_complete.py
args:
- --job-name
- - {{ include "common.fullname" . }}-init-activity-spec
+ - {{ include "common.fullname" . }}-workflow-init
env:
- name: NAMESPACE
valueFrom:
env:
- name: JAVA_OPTIONS
value: {{ .Values.config.javaOptions }}
- volumeMounts:
- - name: {{ include "common.fullname" . }}-config
- mountPath: /etc/onap/activity-spec/be/config
- volumes:
- - name: {{ include "common.fullname" . }}-config
- configMap:
- name : {{ include "common.fullname" . }}-configmap
- defaultMode: 0755
+ - name: CS_HOSTS
+ value: "{{ .Values.config.cassandraHosts }}"
+ - name: CS_PORT
+ value: "{{ .Values.config.cassandraClientPort }}"
+ - name: CS_USER
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
+ - name: CS_PASSWORD
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
+ - name: SDC_PROTOCOL
+ value: "{{ .Values.config.sdcProtocol }}"
+ - name: SDC_ENDPOINT
+ value: "{{ .Values.config.sdcEndpoint }}"
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
apiVersion: batch/v1
kind: Job
metadata:
- name: {{ include "common.fullname" . }}-init-activity-spec
+ name: {{ include "common.fullname" . }}-workflow-init
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}-job
image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- - /root/ready.py
+ - /root/job_complete.py
args:
- - --container-name
- - sdc-cs
+ - --job-name
+ - {{ .Release.Name }}-sdc-cs-config-cassandra
env:
- name: NAMESPACE
valueFrom:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
env:
- name: CS_HOST
- value: sdc-cs
+ value: "sdc-cs"
+ - name: CS_PORT
+ value: "{{ .Values.config.cassandraThriftClientPort }}"
+ - name: CS_AUTHENTICATE
+ value: "{{ .Values.config.cassandaAuthenticationEnabled }}"
- name: CS_USER
valueFrom:
secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
- restartPolicy: Never
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/activity-spec:1.3.0-SNAPSHOT
-configInitImage: onap/activity-spec-init:1.3.0-SNAPSHOT
+image: onap/workflow-backend:1.3.0-SNAPSHOT
+configInitImage: onap/workflow-init:1.3.0-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
debugEnabled: false
config:
- javaOptions: "-Xmx1536m -Xms1536m"
- cassandraSslEnabled: "false"
- cassandraHosts: ['sdc-cs']
- cassandraUserName: "asdc_user"
- cassandraUserPassword: "Aa1234%^!"
- cassandraReconnectTimeout: 30000
- cassandraSocketReadTimeout: 20000
- cassandraSocketConnectTimeout: 20000
- cassandraTruststorePath: "/path/path"
- cassandraTruststorePassword: "Aa123456"
+ javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6000,server=y,suspend=n -Xmx1536m -Xms1536m"
+ cassandaAuthenticationEnabled: true
+ cassandraHosts: sdc-cs
+ cassandraThriftClientPort: 9160
+ cassandraClientPort: 9042
+ sdcProtocol: HTTP
+ sdcEndpoint: sdc-be:8080
# default number of instances
replicaCount: 1
type: NodePort
internalPort: 8080
externalPort: 8080
- portName: sdc-act
+ portName: sdc-wfd-be
nodePort: "57"
ingress:
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Service Design and Creation Workflow Designer frontend
+name: sdc-wfd-fe
+version: 2.0.0
\ No newline at end of file
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
echo "Visit http://127.0.0.1:8080 to use your application"
kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
{{- end }}
-
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "sdc-wfd-be"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: BACKEND
+ value: {{ .Values.config.backendServerURL }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
annotations:
msb.onap.org/service-info: '[
{
- "serviceName": "workflow-modeler",
+ "serviceName": "wf-gui",
"version": "v1",
- "url": "/api/workflow-modeler/v1",
- "protocol": "REST",
- "port": "{{ .Values.service.internalPort }}",
- "enable_ssl": true,
- "visualRange":"1"
- },
- {
- "serviceName": "workflow-modeler-ui",
- "version": "v1",
- "url": "/workflow-modeler",
+ "url": "/",
"protocol": "UI",
- "path": "/workflow-modeler",
"port": "{{ .Values.service.internalPort }}",
- "visualRange":"1"
+ "visualRange":"0|1"
}
]'
spec:
type: {{ .Values.service.type }}
ports:
+ {{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
global:
nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc/sdc-workflow-designer:1.1.0
+image: onap/workflow-frontend:1.3.0-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
debugEnabled: false
+config:
+ javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6001,server=y,suspend=n -Xmx256m -Xms256m"
+ backendServerURL: "http://sdc-wfd-be:8080"
+
# default number of instances
replicaCount: 1
+nodeSelector: {}
+
+affinity: {}
+
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 60
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
enabled: true
readiness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 60
periodSeconds: 10
service:
type: NodePort
- name: sdc-wfd
- portName: sdc-wfd
- nodePort: "56"
internalPort: 8080
+ externalPort: 8080
+ portName: sdc-wfd-fe
+ nodePort: "56"
ingress:
enabled: false
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
"dcae_dt_source_url": ""
},
"WORKFLOW": {
- "workflow_discovery_url": "{{.Values.config.environment.workflowUrl}}",
- "workflow_source_url": "{{.Values.config.environment.workflowUrl}}"
+ "workflow_discovery_url": "http://sdc-wfd-fe.{{include "common.namespace" .}}:8080",
+ "workflow_source_url": "http://sdc.workflow.plugin.simpledemo.onap.org:30256"
}
},
"VnfRepo": {
org.onap.ccsdk.sli.northbound.uebclient.polling-interval=30
org.onap.ccsdk.sli.northbound.uebclient.polling-timeout=15
org.onap.ccsdk.sli.northbound.uebclient.client-startup-timeout=900
-org.onap.ccsdk.sli.northbound.uebclient.relevant-artifact-types=YANG_XML,VF_LICENSE,TOSCA_CSAR,UCPE_LAYER_2_CONFIGURATION
+org.onap.ccsdk.sli.northbound.uebclient.relevant-artifact-types=TOSCA_CSAR
org.onap.ccsdk.sli.northbound.uebclient.activate-server-tls-auth=false
org.onap.ccsdk.sli.northbound.uebclient.keystore-path=
org.onap.ccsdk.sli.northbound.uebclient.keystore-password=
-org.onap.ccsdk.sli.northbound.uebclient.xslt-path-list=
+org.onap.ccsdk.sli.northbound.uebclient.xslt-path-list=/opt/onap/sdnc/ueb-listener/lib/normalizeTagNames.xslt,/opt/onap/sdnc/ueb-listener/lib/removeNs.xslt
org.onap.ccsdk.sli.northbound.uebclient.artifact-map=/opt/onap/sdnc/data/properties/artifact.map
org.onap.ccsdk.sli.northbound.uebclient.msg-bus-address=message-router.{{.Release.Namespace}},message-router.{{.Release.Namespace}}
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
-# Copyright © 2018 ZTE
+# Copyright (C) 2018 Verizon. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
apiVersion: v1
-description: ONAP Service Design and Creation Common Workflow Design
-name: sdc-wfd
-version: 2.0.0
\ No newline at end of file
+description: ONAP VFC - DB
+name: vfc-db
+version: 2.0.0
-# Copyright © 2018 ZTE
+# Copyright (C) 2018 Verizon. All Rights Reserved
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
- {{ if eq .Values.liveness.enabled true }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
livenessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: MSB_ADDR
+ value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}2
+
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName }}2
+
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/vfc/db:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: vfc-db
+ portName: vfc-db
+ externalPort: 3306
+ internalPort: 3306
+ externalPort2: 6379
+ internalPort2: 6379
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
+
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
config:
msbServiceName: msb-iag
msbPort: 80
+ dbServiceName: vfc-db
+ dbPort: 3306
# application configuration
config:
metadata:
labels:
app: {{ include "common.fullname" . }}
+ release: {{ .Release.Name }}
annotations:
pod.alpha.kubernetes.io/initialized: "true"
spec:
spec:
template:
metadata:
+ labels:
+ release: {{ .Release.Name }}
name: vid-galera-init
spec:
initContainers:
Code Review / oom.git / commitdiff