--- /dev/null
+module bbf-tr-196-2-0-3-full {
+ namespace "urn:onf:otcc:wireless:yang:radio-access";
+ prefix ran;
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+ import ietf-inet-types {
+ prefix inet;
+ }
+
+ organization
+ "ONF (Open Networking Foundation) Open Transport Working Group - Wireless Project";
+ contact
+ "WG Web: <https://www.opennetworking.org/technical-communities/areas/specification/1931-optical-transport>
+ WG List: <mailto:wireless-transport@login.opennetworking.org>
+ WG Chair: Lyndon Ong <mailto:lyong@ciena.com>
+ WG Chair: Giorgio Cazzaniga <mailto:giorgio.cazzaniga@sm-optics.com>
+ Editors: Ramakrishnan, Shanthakumar (Shanth) <Shanthakumar.Ramakrishnan@commscope.com> Martin Skorupski <mailto:martin.skorupski@highstreet-technologies.com>";
+ description
+ "This module contains a collection of YANG definitions for managing radio access network (RAN) devices.";
+
+ revision 2018-04-08 {
+ description
+ "Initial version, used only for ONAP PoC 2018-06-25";
+ reference
+ "ONF TR ???: A YANG Data Model for Radio Access Networks.
+ BBF TR-196 2.0.3 full";
+ }
+
+ list fap-service {
+ key "alias";
+ uses fap-service-g;
+ container x-0005b9-lte {
+ uses x-0005b9-lte-g;
+ }
+ container capabilities {
+ uses capabilities-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.";
+ container capabilities-umts {
+ uses capabilities-umts-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.UMTS.";
+ container capabilities-umts-self-config {
+ uses capabilities-umts-self-config-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.UMTS.SelfConfig.";
+ }
+ }
+ container capabilities-lte {
+ uses capabilities-lte-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.LTE.";
+ }
+ container capabilities-cdma2000 {
+ uses capabilities-cdma2000-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.CDMA2000.";
+ container capabilities-cdma2000-one-x {
+ uses capabilities-cdma2000-one-x-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.CDMA2000.OneX.";
+ container capabilities-cdma2000-one-x-self-config {
+ uses capabilities-cdma2000-one-x-self-config-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.CDMA2000.OneX.SelfConfig.";
+ }
+ }
+ container capabilities-cdma2000-hrpd {
+ uses capabilities-cdma2000-hrpd-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.CDMA2000.HRPD.";
+ container capabilities-cdma2000-hrpd-self-config {
+ uses capabilities-cdma2000-hrpd-self-config-g;
+ description
+ "Container for object class FAPService.{i}.Capabilities.CDMA2000.HRPD.SelfConfig.";
+ }
+ }
+ }
+ }
+ container fap-control {
+ uses fap-control-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.";
+ container fap-control-umts {
+ uses fap-control-umts-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.UMTS.";
+ container fap-control-umts-self-config {
+ uses fap-control-umts-self-config-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.UMTS.SelfConfig.";
+ }
+ container fap-control-umts-gateway {
+ uses fap-control-umts-gateway-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.UMTS.Gateway.";
+ }
+ }
+ container fap-control-lte {
+ uses fap-control-lte-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.LTE.";
+ container fap-control-lte-gateway {
+ uses fap-control-lte-gateway-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.LTE.Gateway.";
+ }
+ }
+ container fap-control-cdma2000 {
+ uses fap-control-cdma2000-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.";
+ container fap-control-cdma2000-time {
+ uses fap-control-cdma2000-time-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.Time.";
+ }
+ container fap-control-cdma2000-one-x {
+ uses fap-control-cdma2000-one-x-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.OneX.";
+ container fap-control-cdma2000-one-x-active-handin-measurement {
+ uses fap-control-cdma2000-one-x-active-handin-measurement-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.OneX.ActiveHandinMeasurement.";
+ }
+ container fap-control-cdma2000-one-x-self-config {
+ uses fap-control-cdma2000-one-x-self-config-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.OneX.SelfConfig.";
+ }
+ }
+ container fap-control-cdma2000-gateway {
+ uses fap-control-cdma2000-gateway-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.Gateway.";
+ }
+ container fap-control-cdma2000-hrpd {
+ uses fap-control-cdma2000-hrpd-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.HRPD.";
+ container fap-control-cdma2000-hrpd-self-config {
+ uses fap-control-cdma2000-hrpd-self-config-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.HRPD.SelfConfig.";
+ }
+ container fap-control-cdma2000-hrpd-a13 {
+ uses fap-control-cdma2000-hrpd-a13-g;
+ description
+ "Container for object class FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.";
+ list fap-control-cdma2000-hrpd-a13-color-code-to-uati104 {
+ key "color-code uati104";
+ uses fap-control-cdma2000-hrpd-a13-color-code-to-uati104-g;
+ description
+ "List of object class FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}.";
+ }
+ list fap-control-cdma2000-hrpd-a13-hrpd-subnet-to-ip {
+ key "a13-ip-address";
+ uses fap-control-cdma2000-hrpd-a13-hrpd-subnet-to-ip-g;
+ description
+ "List of object class FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.";
+ }
+ }
+ }
+ }
+ }
+ container access-mgmt {
+ uses access-mgmt-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.";
+ container access-mgmt-umts {
+ uses access-mgmt-umts-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.UMTS.";
+ list access-mgmt-umts-member-detail {
+ key "imsi";
+ uses access-mgmt-umts-member-detail-g;
+ description
+ "List of object class FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.";
+ }
+ container access-mgmt-umts-local-ip-access {
+ uses access-mgmt-umts-local-ip-access-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.UMTS.LocalIPAccess.";
+ }
+ }
+ container access-mgmt-lte {
+ uses access-mgmt-lte-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.LTE.";
+ container access-mgmt-lte-local-ip-access {
+ uses access-mgmt-lte-local-ip-access-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.LTE.LocalIPAccess.";
+ }
+ }
+ container access-mgmt-cdma2000 {
+ uses access-mgmt-cdma2000-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.CDMA2000.";
+ list access-mgmt-cdma2000-member-detail {
+ key "imsi";
+ uses access-mgmt-cdma2000-member-detail-g;
+ description
+ "List of object class FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.";
+ }
+ container access-mgmt-cdma2000-local-ip-access {
+ uses access-mgmt-cdma2000-local-ip-access-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.";
+ container access-mgmt-cdma2000-local-ip-access-hrpd {
+ uses access-mgmt-cdma2000-local-ip-access-hrpd-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.";
+ list access-mgmt-cdma2000-local-ip-access-hrpd-egress-filter {
+ key "subnet subnet-mask";
+ uses access-mgmt-cdma2000-local-ip-access-hrpd-egress-filter-g;
+ description
+ "List of object class FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}.";
+ }
+ }
+ }
+ }
+ container access-mgmt-legacy {
+ uses access-mgmt-legacy-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.Legacy.";
+ container access-mgmt-legacy-local-ip-access {
+ uses access-mgmt-legacy-local-ip-access-g;
+ description
+ "Container for object class FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.";
+ list access-mgmt-legacy-local-ip-access-rule {
+ key "dest-ip-address dest-subnet-mask protocol";
+ uses access-mgmt-legacy-local-ip-access-rule-g;
+ description
+ "List of object class FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.";
+ }
+ }
+ }
+ }
+ container cell-config {
+ uses cell-config-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.";
+ container umts {
+ uses umts-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.";
+ container umts-cn {
+ uses umts-cn-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.CN.";
+ container umts-cn-cs-domain {
+ uses umts-cn-cs-domain-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.CN.CSDomain.";
+ }
+ container umts-cn-ps-domain {
+ uses umts-cn-ps-domain-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.CN.PSDomain.";
+ }
+ }
+ container umts-ran {
+ uses umts-ran-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.";
+ container umts-ran-csg {
+ uses umts-ran-csg-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.CSG.";
+ container umts-ran-csg-csgpsc-split-info {
+ uses umts-ran-csg-csgpsc-split-info-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.";
+ }
+ }
+ container umts-ran-cell-selection {
+ uses umts-ran-cell-selection-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.";
+ }
+ container umts-ran-rrc-timers {
+ uses umts-ran-rrc-timers-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.";
+ }
+ container umts-ran-drx {
+ uses umts-ran-drx-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.DRX.";
+ }
+ container umts-ran-power-control {
+ uses umts-ran-power-control-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.";
+ }
+ container umts-ran-cell-restriction {
+ uses umts-ran-cell-restriction-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.";
+ }
+ container umts-ran-intra-freq-meas {
+ uses umts-ran-intra-freq-meas-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.";
+ list umts-ran-intra-freq-meas-instance {
+ key "intra-frequency-event-identity";
+ uses umts-ran-intra-freq-meas-instance-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.";
+ }
+ }
+ container umts-ran-inter-freq-meas {
+ uses umts-ran-inter-freq-meas-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.";
+ list umts-ran-inter-freq-meas-instance {
+ key "intra-frequency-event-identity";
+ uses umts-ran-inter-freq-meas-instance-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.";
+ }
+ }
+ container umts-ran-inter-rat-meas {
+ uses umts-ran-inter-rat-meas-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.";
+ list umts-ran-inter-rat-meas-instance {
+ key "inter-rat-event-identity";
+ uses umts-ran-inter-rat-meas-instance-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.";
+ }
+ }
+ container umts-ran-ue-internal-meas {
+ uses umts-ran-ue-internal-meas-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.";
+ }
+ container umts-ran-rf {
+ uses umts-ran-rf-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.RF.";
+ }
+ container umts-ran-neighbor-list {
+ uses umts-ran-neighbor-list-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.";
+ list umts-ran-neighbor-list-intra-freq-cell {
+ key "pcpich-scrambling-code";
+ uses umts-ran-neighbor-list-intra-freq-cell-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.";
+ }
+ list umts-ran-neighbor-list-inter-freq-cell {
+ key "pcpich-scrambling-code uarfcndl";
+ uses umts-ran-neighbor-list-inter-freq-cell-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.";
+ }
+ container umts-ran-neighbor-list-inter-rat-cell {
+ uses umts-ran-neighbor-list-inter-rat-cell-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.";
+ list umts-ran-neighbor-list-inter-rat-cell-gsm {
+ key "bccharfcn";
+ uses umts-ran-neighbor-list-inter-rat-cell-gsm-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.";
+ }
+ }
+ }
+ container umts-ran-neighbor-list-in-use {
+ uses umts-ran-neighbor-list-in-use-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.";
+ list umts-ran-neighbor-list-in-use-intra-freq-cell {
+ key "pcpich-scrambling-code";
+ uses umts-ran-neighbor-list-in-use-intra-freq-cell-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.";
+ }
+ list umts-ran-neighbor-list-in-use-inter-freq-cell {
+ key "pcpich-scrambling-code uarfcndl";
+ uses umts-ran-neighbor-list-in-use-inter-freq-cell-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.";
+ }
+ container umts-ran-neighbor-list-in-use-inter-rat-cell {
+ uses umts-ran-neighbor-list-in-use-inter-rat-cell-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.";
+ list umts-ran-neighbor-list-in-use-inter-rat-cell-gsm {
+ key "bccharfcn";
+ uses umts-ran-neighbor-list-in-use-inter-rat-cell-gsm-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.";
+ }
+ }
+ }
+ }
+ container umts-rab {
+ uses umts-rab-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.UMTS.RAB.";
+ }
+ }
+ container lte {
+ uses lte-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.";
+ list lte-tunnel {
+ key "tunnel-ref";
+ uses lte-tunnel-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.Tunnel.{i}.";
+ }
+ container lte-epc {
+ uses lte-epc-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.EPC.";
+ list lte-epc-plmn-list {
+ key "plmnid";
+ uses lte-epc-plmn-list-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.";
+ }
+ list lte-epc-qo-s {
+ key "qci";
+ uses lte-epc-qo-s-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.";
+ }
+ }
+ container lte-ran {
+ uses lte-ran-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.";
+ container lte-ran-common {
+ uses lte-ran-common-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Common.";
+ }
+ container lte-ran-s1-ap {
+ uses lte-ran-s1-ap-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.S1AP.";
+ }
+ container lte-ran-s1-u {
+ uses lte-ran-s1-u-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.S1U.";
+ }
+ container lte-ran-rf {
+ uses lte-ran-rf-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.RF.";
+ }
+ container lte-ran-phy {
+ uses lte-ran-phy-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.";
+ container lte-ran-phy-antenna-info {
+ uses lte-ran-phy-antenna-info-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.AntennaInfo.";
+ }
+ container lte-ran-phy-pdsch {
+ uses lte-ran-phy-pdsch-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.PDSCH.";
+ }
+ container lte-ran-phy-srs {
+ uses lte-ran-phy-srs-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.SRS.";
+ }
+ container lte-ran-phy-prach {
+ uses lte-ran-phy-prach-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.";
+ }
+ container lte-ran-phy-pucch {
+ uses lte-ran-phy-pucch-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.";
+ }
+ container lte-ran-phy-pusch {
+ uses lte-ran-phy-pusch-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.";
+ container lte-ran-phy-pusch-ulrs {
+ uses lte-ran-phy-pusch-ulrs-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.ULRS.";
+ }
+ }
+ container lte-ran-phy-ul-power-control {
+ uses lte-ran-phy-ul-power-control-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.";
+ }
+ container lte-ran-phy-mbsfn {
+ uses lte-ran-phy-mbsfn-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.";
+ list lte-ran-phy-mbsfn-sf-config-list {
+ key "radio-frame-allocation-period radioframe-allocation-offset radio-frame-allocation-size";
+ uses lte-ran-phy-mbsfn-sf-config-list-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.";
+ }
+ }
+ container lte-ran-phy-prs {
+ uses lte-ran-phy-prs-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.PRS.";
+ }
+ container lte-ran-phy-tdd-frame {
+ uses lte-ran-phy-tdd-frame-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.PHY.TDDFrame.";
+ }
+ }
+ container lte-ran-mac {
+ uses lte-ran-mac-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.MAC.";
+ container lte-ran-mac-rach {
+ uses lte-ran-mac-rach-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.";
+ }
+ container lte-ran-mac-drx {
+ uses lte-ran-mac-drx-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.";
+ }
+ container lte-ran-mac-ulsch {
+ uses lte-ran-mac-ulsch-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.MAC.ULSCH.";
+ }
+ }
+ container lte-ran-rlc {
+ uses lte-ran-rlc-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.RLC.";
+ container lte-ran-rlc-srb1 {
+ uses lte-ran-rlc-srb1-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.";
+ }
+ container lte-ran-rlc-srb2 {
+ uses lte-ran-rlc-srb2-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.";
+ }
+ }
+ container lte-ran-rrc-timers {
+ uses lte-ran-rrc-timers-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.";
+ }
+ container lte-ran-cell-restriction {
+ uses lte-ran-cell-restriction-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.";
+ }
+ container lte-ran-mobility {
+ uses lte-ran-mobility-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.";
+ container lte-ran-mobility-idle-mode {
+ uses lte-ran-mobility-idle-mode-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.";
+ container lte-ran-mobility-idle-mode-common {
+ uses lte-ran-mobility-idle-mode-common-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.";
+ }
+ container lte-ran-mobility-idle-mode-intra-freq {
+ uses lte-ran-mobility-idle-mode-intra-freq-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.";
+ }
+ container lte-ran-mobility-idle-mode-inter-freq {
+ uses lte-ran-mobility-idle-mode-inter-freq-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.";
+ list lte-ran-mobility-idle-mode-inter-freq-carrier {
+ key "eutra-carrier-arfcn";
+ uses lte-ran-mobility-idle-mode-inter-freq-carrier-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.";
+ }
+ }
+ container lte-ran-mobility-idle-mode-irat {
+ uses lte-ran-mobility-idle-mode-irat-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.";
+ container lte-ran-mobility-idle-mode-irat-utra {
+ uses lte-ran-mobility-idle-mode-irat-utra-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.";
+ list lte-ran-mobility-idle-mode-irat-utra-utranfdd-freq {
+ key "utra-carrier-arfcn";
+ uses lte-ran-mobility-idle-mode-irat-utra-utranfdd-freq-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.";
+ }
+ }
+ container lte-ran-mobility-idle-mode-irat-geran {
+ uses lte-ran-mobility-idle-mode-irat-geran-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.";
+ list lte-ran-mobility-idle-mode-irat-geran-geran-freq-group {
+ key "bccharfcn";
+ uses lte-ran-mobility-idle-mode-irat-geran-geran-freq-group-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.";
+ }
+ }
+ container lte-ran-mobility-idle-mode-irat-cdma2000 {
+ uses lte-ran-mobility-idle-mode-irat-cdma2000-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.";
+ list lte-ran-mobility-idle-mode-irat-cdma2000-cdma2000-band {
+ key "band-class";
+ uses lte-ran-mobility-idle-mode-irat-cdma2000-cdma2000-band-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.";
+ }
+ }
+ }
+ }
+ container lte-ran-mobility-conn-mode {
+ uses lte-ran-mobility-conn-mode-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.";
+ container lte-ran-mobility-conn-mode-eutra {
+ uses lte-ran-mobility-conn-mode-eutra-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.";
+ }
+ container lte-ran-mobility-conn-mode-irat {
+ uses lte-ran-mobility-conn-mode-irat-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.";
+ }
+ }
+ }
+ container lte-ran-neighbor-list {
+ uses lte-ran-neighbor-list-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.NeighborList.";
+ list lte-ran-neighbor-list-lte-cell {
+ key "plmnid cid";
+ uses lte-ran-neighbor-list-lte-cell-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.";
+ }
+ container lte-ran-neighbor-list-inter-rat-cell {
+ uses lte-ran-neighbor-list-inter-rat-cell-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.";
+ list lte-ran-neighbor-list-inter-rat-cell-umts {
+ key "plmnid cid";
+ uses lte-ran-neighbor-list-inter-rat-cell-umts-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.";
+ }
+ list lte-ran-neighbor-list-inter-rat-cell-gsm {
+ key "plmnid lac ci";
+ uses lte-ran-neighbor-list-inter-rat-cell-gsm-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.";
+ }
+ list lte-ran-neighbor-list-inter-rat-cell-cdma2000 {
+ key "cid";
+ uses lte-ran-neighbor-list-inter-rat-cell-cdma2000-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.";
+ }
+ }
+ }
+ container lte-ran-neighbor-list-in-use {
+ uses lte-ran-neighbor-list-in-use-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.";
+ list lte-ran-neighbor-list-in-use-lte-cell {
+ key "plmnid cid";
+ uses lte-ran-neighbor-list-in-use-lte-cell-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.";
+ }
+ container lte-ran-neighbor-list-in-use-inter-rat-cell {
+ uses lte-ran-neighbor-list-in-use-inter-rat-cell-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.";
+ list lte-ran-neighbor-list-in-use-inter-rat-cell-umts {
+ key "plmnid cid";
+ uses lte-ran-neighbor-list-in-use-inter-rat-cell-umts-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.";
+ }
+ list lte-ran-neighbor-list-in-use-inter-rat-cell-gsm {
+ key "plmnid lac ci";
+ uses lte-ran-neighbor-list-in-use-inter-rat-cell-gsm-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.";
+ }
+ list lte-ran-neighbor-list-in-use-inter-rat-cell-cdma2000 {
+ key "cid";
+ uses lte-ran-neighbor-list-in-use-inter-rat-cell-cdma2000-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.";
+ }
+ }
+ }
+ }
+ }
+ container cdma2000 {
+ uses cdma2000-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.";
+ container cdma2000-one-x {
+ uses cdma2000-one-x-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.";
+ container cdma2000-one-x-ran {
+ uses cdma2000-one-x-ran-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.";
+ container cdma2000-one-x-ran-rf {
+ uses cdma2000-one-x-ran-rf-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.";
+ }
+ container cdma2000-one-x-ran-network-listen-mode-config {
+ uses cdma2000-one-x-ran-network-listen-mode-config-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.";
+ }
+ container cdma2000-one-x-ran-access-parameters {
+ uses cdma2000-one-x-ran-access-parameters-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.";
+ }
+ container cdma2000-one-x-ran-system-parameters {
+ uses cdma2000-one-x-ran-system-parameters-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.";
+ }
+ container cdma2000-one-x-ran-extended-system-parameters {
+ uses cdma2000-one-x-ran-extended-system-parameters-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.";
+ }
+ container cdma2000-one-x-ran-forward-pwr-ctr {
+ uses cdma2000-one-x-ran-forward-pwr-ctr-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.";
+ }
+ container cdma2000-one-x-ran-hard-handoff {
+ uses cdma2000-one-x-ran-hard-handoff-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.";
+ container cdma2000-one-x-ran-hard-handoff-stats {
+ uses cdma2000-one-x-ran-hard-handoff-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.";
+ }
+ }
+ container cdma2000-one-x-ran-power-control {
+ uses cdma2000-one-x-ran-power-control-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.";
+ }
+ list cdma2000-one-x-ran-neighbor-list {
+ key "one-x-neighbor-index neighbor-pn";
+ uses cdma2000-one-x-ran-neighbor-list-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.";
+ }
+ container cdma2000-one-x-ran-apidm {
+ uses cdma2000-one-x-ran-apidm-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.";
+ }
+ container cdma2000-one-x-ran-apidtm {
+ uses cdma2000-one-x-ran-apidtm-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDTM.";
+ }
+ container cdma2000-one-x-ran-appim {
+ uses cdma2000-one-x-ran-appim-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.";
+ list cdma2000-one-x-ran-appim-appirec {
+ key "apsid apnid apband apfreq appnrectype appnreclen appnrec";
+ uses cdma2000-one-x-ran-appim-appirec-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.";
+ }
+ }
+ }
+ container cdma2000-one-x-pcf-config {
+ uses cdma2000-one-x-pcf-config-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.";
+ container cdma2000-one-x-pcf-config-pcf-performance-stats {
+ uses cdma2000-one-x-pcf-config-pcf-performance-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.";
+ }
+ }
+ list cdma2000-one-x-batch-pcfpdsn {
+ key "batch-table-number";
+ uses cdma2000-one-x-batch-pcfpdsn-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.";
+ }
+ list cdma2000-one-x-pcfpdsn {
+ key "pdsn-number security-parameter-index security-key";
+ uses cdma2000-one-x-pcfpdsn-g;
+ container cdma2000-one-x-pcfpdsn-a11-reg-update-stats {
+ uses cdma2000-one-x-pcfpdsn-a11-reg-update-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.";
+ }
+ container cdma2000-one-x-pcfpdsn-pcfpdsn-stats {
+ uses cdma2000-one-x-pcfpdsn-pcfpdsn-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.";
+ }
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.";
+ }
+ container cdma2000-one-x-stats {
+ uses cdma2000-one-x-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.";
+ }
+ container cdma2000-one-x-redirect {
+ uses cdma2000-one-x-redirect-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.OneX.Redirect.";
+ }
+ }
+ container cdma2000-hrpd {
+ uses cdma2000-hrpd-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.";
+ container cdma2000-hrpd-ran {
+ uses cdma2000-hrpd-ran-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.";
+ container cdma2000-hrpd-ran-rf {
+ uses cdma2000-hrpd-ran-rf-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.";
+ }
+ }
+ container cdma2000-hrpd-pcf-config {
+ uses cdma2000-hrpd-pcf-config-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.";
+ container cdma2000-hrpd-pcf-config-pcf-performance-stats {
+ uses cdma2000-hrpd-pcf-config-pcf-performance-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.";
+ }
+ }
+ list cdma2000-hrpd-batch-pcfpdsn {
+ key "batch-table-number batch-table-security-parameter-index batch-table-secret-key";
+ uses cdma2000-hrpd-batch-pcfpdsn-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.";
+ }
+ list cdma2000-hrpd-pcfpdsn {
+ key "pdsn-number security-parameter-index security-key";
+ uses cdma2000-hrpd-pcfpdsn-g;
+ container cdma2000-hrpd-pcfpdsn-a11-session-update-stats {
+ uses cdma2000-hrpd-pcfpdsn-a11-session-update-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.";
+ }
+ container cdma2000-hrpd-pcfpdsn-a11-reg-update-stats {
+ uses cdma2000-hrpd-pcfpdsn-a11-reg-update-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.";
+ }
+ container cdma2000-hrpd-pcfpdsn-aux-a10-stats {
+ uses cdma2000-hrpd-pcfpdsn-aux-a10-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.";
+ }
+ container cdma2000-hrpd-pcfpdsn-pcfpdsn-stats {
+ uses cdma2000-hrpd-pcfpdsn-pcfpdsn-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.";
+ }
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.";
+ }
+ container cdma2000-hrpd-redirect {
+ uses cdma2000-hrpd-redirect-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.Redirect.";
+ }
+ container cdma2000-hrpd-call-control-stats {
+ uses cdma2000-hrpd-call-control-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.";
+ }
+ container cdma2000-hrpd-qo-s-stats {
+ uses cdma2000-hrpd-qo-s-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.";
+ }
+ container cdma2000-hrpd-rnc-sig-apps-stats {
+ uses cdma2000-hrpd-rnc-sig-apps-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.";
+ }
+ container cdma2000-hrpd-access-auth-config {
+ uses cdma2000-hrpd-access-auth-config-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthConfig.";
+ }
+ container cdma2000-hrpd-access-auth-stats {
+ uses cdma2000-hrpd-access-auth-stats-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.";
+ }
+ }
+ container cdma2000-beacon {
+ uses cdma2000-beacon-g;
+ description
+ "Container for object class FAPService.{i}.CellConfig.CDMA2000.Beacon.";
+ list cdma2000-beacon-beacon-list {
+ key "beacon-index";
+ uses cdma2000-beacon-beacon-list-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.";
+ }
+ list cdma2000-beacon-hrpd-beacon-list {
+ key "beacon-index";
+ uses cdma2000-beacon-hrpd-beacon-list-g;
+ description
+ "List of object class FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.";
+ }
+ }
+ }
+ }
+ container rem {
+ uses rem-g;
+ description
+ "Container for object class FAPService.{i}.REM.";
+ container rem-umts {
+ uses rem-umts-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.";
+ container rem-umts-wcdma {
+ uses rem-umts-wcdma-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.WCDMA.";
+ list rem-umts-wcdma-cell {
+ key "rem-umts-wcdma-cell-key";
+ uses rem-umts-wcdma-cell-g;
+ container rem-umts-wcdma-cell-rf {
+ uses rem-umts-wcdma-cell-rf-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.";
+ }
+ container rem-umts-wcdma-cell-bcch {
+ uses rem-umts-wcdma-cell-bcch-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.";
+ container rem-umts-wcdma-cell-bcch-csgpsc-split-info {
+ uses rem-umts-wcdma-cell-bcch-csgpsc-split-info-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.";
+ }
+ container rem-umts-wcdma-cell-bcch-reference-position {
+ uses rem-umts-wcdma-cell-bcch-reference-position-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.";
+ }
+ }
+ description
+ "List of object class FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.";
+ }
+ }
+ container rem-umts-gsm {
+ uses rem-umts-gsm-g;
+ description
+ "Container for object class FAPService.{i}.REM.UMTS.GSM.";
+ list rem-umts-gsm-cell {
+ key "arfcn bsic";
+ uses rem-umts-gsm-cell-g;
+ description
+ "List of object class FAPService.{i}.REM.UMTS.GSM.Cell.{i}.";
+ }
+ }
+ }
+ container rem-lte {
+ uses rem-lte-g;
+ description
+ "Container for object class FAPService.{i}.REM.LTE.";
+ list rem-lte-cell {
+ key "rem-lte-cell-key";
+ uses rem-lte-cell-g;
+ container rem-lte-cell-rf {
+ uses rem-lte-cell-rf-g;
+ description
+ "Container for object class FAPService.{i}.REM.LTE.Cell.{i}.RF.";
+ }
+ container rem-lte-cell-bcch {
+ uses rem-lte-cell-bcch-g;
+ description
+ "Container for object class FAPService.{i}.REM.LTE.Cell.{i}.BCCH.";
+ list rem-lte-cell-bcch-plmn-list {
+ key "plmnid";
+ uses rem-lte-cell-bcch-plmn-list-g;
+ description
+ "List of object class FAPService.{i}.REM.LTE.Cell.{i}.BCCH.PLMNList.{i}.";
+ }
+ }
+ description
+ "List of object class FAPService.{i}.REM.LTE.Cell.{i}.";
+ }
+ list rem-lte-carrier-meas {
+ key "carrier-arfcndl carrier-ch-width";
+ uses rem-lte-carrier-meas-g;
+ description
+ "List of object class FAPService.{i}.REM.LTE.CarrierMeas.{i}.";
+ }
+ }
+ container rem-cdma2000 {
+ uses rem-cdma2000-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.";
+ container rem-cdma2000-one-x {
+ uses rem-cdma2000-one-x-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.OneX.";
+ list rem-cdma2000-one-x-channel {
+ key "sniffing-band-class sniffing-channel-number";
+ uses rem-cdma2000-one-x-channel-g;
+ description
+ "List of object class FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.";
+ }
+ list rem-cdma2000-one-x-cell {
+ key "rem-cdma2000-one-x-cell-key";
+ uses rem-cdma2000-one-x-cell-g;
+ container rem-cdma2000-one-x-cell-rf {
+ uses rem-cdma2000-one-x-cell-rf-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.";
+ }
+ container rem-cdma2000-one-x-cell-control-channel {
+ uses rem-cdma2000-one-x-cell-control-channel-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.";
+ }
+ description
+ "List of object class FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.";
+ }
+ }
+ container rem-cdma2000-hrpd {
+ uses rem-cdma2000-hrpd-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.HRPD.";
+ list rem-cdma2000-hrpd-channel {
+ key "sniffing-band-class sniffing-channel-number";
+ uses rem-cdma2000-hrpd-channel-g;
+ description
+ "List of object class FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.";
+ }
+ list rem-cdma2000-hrpd-cell {
+ key "rem-cdma2000-hrpd-cell-key";
+ uses rem-cdma2000-hrpd-cell-g;
+ container rem-cdma2000-hrpd-cell-rf {
+ uses rem-cdma2000-hrpd-cell-rf-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.";
+ }
+ container rem-cdma2000-hrpd-cell-control-channel {
+ uses rem-cdma2000-hrpd-cell-control-channel-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.";
+ }
+ description
+ "List of object class FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.";
+ }
+ }
+ container rem-cdma2000-macro-timing {
+ uses rem-cdma2000-macro-timing-g;
+ description
+ "Container for object class FAPService.{i}.REM.CDMA2000.MacroTiming.";
+ list rem-cdma2000-macro-timing-channel {
+ key "band-class channel-number";
+ uses rem-cdma2000-macro-timing-channel-g;
+ description
+ "List of object class FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.";
+ }
+ }
+ }
+ }
+ container transport {
+ uses transport-g;
+ description
+ "Container for object class FAPService.{i}.Transport.";
+ container transport-sip {
+ uses transport-sip-g;
+ description
+ "Container for object class FAPService.{i}.Transport.SIP.";
+ container transport-sip-fcs {
+ uses transport-sip-fcs-g;
+ description
+ "Container for object class FAPService.{i}.Transport.SIP.FCS.";
+ }
+ }
+ container transport-sctp {
+ uses transport-sctp-g;
+ description
+ "Container for object class FAPService.{i}.Transport.SCTP.";
+ list transport-sctp-assoc {
+ key "primary-peer-address local-port";
+ uses transport-sctp-assoc-g;
+ description
+ "List of object class FAPService.{i}.Transport.SCTP.Assoc.{i}.";
+ }
+ }
+ container transport-real-time {
+ uses transport-real-time-g;
+ description
+ "Container for object class FAPService.{i}.Transport.RealTime.";
+ container transport-real-time-perf {
+ uses transport-real-time-perf-g;
+ description
+ "Container for object class FAPService.{i}.Transport.RealTime.Perf.";
+ }
+ }
+ container transport-packet {
+ uses transport-packet-g;
+ description
+ "Container for object class FAPService.{i}.Transport.Packet.";
+ }
+ container transport-security {
+ uses transport-security-g;
+ description
+ "Container for object class FAPService.{i}.Transport.Security.";
+ list transport-security-secret {
+ key "uicc-card-id";
+ uses transport-security-secret-g;
+ description
+ "List of object class FAPService.{i}.Transport.Security.Secret.{i}.";
+ }
+ }
+ }
+ description
+ "List of object class FAPService.{i}.";
+ }
+
+ grouping fap-service-g {
+ description
+ "The Femto Access Point (FAP) Service Object.";
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Alias";
+ }
+ leaf device-type {
+ type enumeration {
+ enum "standalone" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.DeviceType - Standalone";
+ }
+ enum "integrated" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.DeviceType - Integrated";
+ }
+ }
+ description
+ "The type of FAP device.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.DeviceType";
+ }
+ leaf dn-prefix {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The Distinguished Name prefix (DNPrefix) is an operator-configurable prefix string that is pre-pended to object distinguished names in the {{bibref|TR-157a5}} alarm object. See {{bibref|3GPP-TS.32.300}} for the formal definition and examples of DNPrefix as applied to 3GPP alarm objects";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.DNPrefix";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.";
+ }
+
+ grouping x-0005b9-lte-g {
+ leaf phy-cell-id-in-use {
+ type uint64;
+ default 0;
+ }
+ }
+ grouping capabilities-g {
+ description
+ "This object contains parameters relating to the hardware capabilities of the FAP device.";
+ leaf gps-equipped {
+ type boolean;
+ description
+ "Indicates whether the FAP is equipped with a GPS receiver or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.GPSEquipped";
+ }
+ leaf max-tx-power {
+ type uint64;
+ units "dBm";
+ description
+ "Indicates the maximum possible transmit power in {{units}} that the FAP hardware can support.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.MaxTxPower";
+ }
+ leaf-list supported-systems {
+ type enumeration {
+ enum "umts" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.SupportedSystems - UMTS";
+ }
+ enum "lte" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.SupportedSystems - LTE";
+ }
+ enum "cdma1x" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.SupportedSystems - CDMA1x";
+ }
+ enum "cdmahrpd" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.SupportedSystems - CDMAHRPD";
+ }
+ }
+ description
+ "{{list}} Each entry is a type of system that the FAP supports. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.SupportedSystems";
+ }
+ leaf beacon {
+ type boolean;
+ description
+ "Indicates whether FAP can support beacon transmission.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.Beacon";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.";
+ }
+
+ grouping capabilities-umts-g {
+ description
+ "This object contains parameters relating to the system and RF aspect of the FAP device that supports the UMTS system.";
+ leaf duplex-mode {
+ type enumeration {
+ enum "fdd-mode" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.DuplexMode - FDDMode";
+ }
+ }
+ description
+ "Indicates the mode supported by the FAP. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.DuplexMode";
+ }
+ leaf gsm-rx-supported {
+ type boolean;
+ description
+ "Indicates whether the FAP hardware supports the receiving function of GSM or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxSupported";
+ }
+ leaf hsdpa-supported {
+ type boolean;
+ description
+ "Indicates whether the FAP hardware supports the HSDPA capability or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.HSDPASupported";
+ }
+ leaf max-hsdpa-data-rate-supported {
+ type uint64;
+ units "Kbps";
+ description
+ "If the FAP hardware supports HSDPA ({{param|HSDPASupported}} is {{true}}), this parameter indicates the maximum HSDPA data rate in {{units}} that the device supports.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.MaxHSDPADataRateSupported";
+ }
+ leaf hsupa-supported {
+ type boolean;
+ description
+ "Indicates whether the FAP hardware supports the HSUPA capability or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.HSUPASupported";
+ }
+ leaf max-hsupa-data-rate-supported {
+ type uint64;
+ units "Kbps";
+ description
+ "If the FAP hardware supports HSUPA ({{param|HSUPASupported}} is {{true}}), this parameter indicates the maximum HSUPA data rate in {{units}} that the device supports.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.MaxHSUPADataRateSupported";
+ }
+ leaf max-hspdsc-hs-supported {
+ type uint8 {
+ range "0..15";
+ }
+ description
+ "If the FAP hardware supports HSPA family (either {{param|HSDPASupported}} is {{true}} or {{param|HSUPASupported}} is {{true}}), this parameter indicates the available number of codes at the defined spreading factor (SF=16), within the complete code tree. See {{bibref|3GPP-TS.32.642|Section 6.3.9}} for more details.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.MaxHSPDSCHsSupported";
+ }
+ leaf max-hsscc-hs-supported {
+ type uint64;
+ description
+ "If the FAP hardware supports HSPA family (either {{param|HSDPASupported}} is {{true}} or {{param|HSUPASupported}} is {{true}}), this parameter indicates the available number of HS-SCCHs for one cell. See {{bibref|3GPP-TS.32.642|Section 6.3.9}} for more details.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.MaxHSSCCHsSupported";
+ }
+ leaf-list fdd-bands-supported {
+ type string;
+ min-elements 1;
+ max-elements "16";
+ description
+ "{{list}} Indicates the UMTS bands that the FAP supports {{bibref|3GPP-TS.25.104}}, Release 8. At least one band MUST be supported and multiple bands MAY be supported. {{bibref|3GPP-TS.25.104}} Version 8.3.0 defines 14 UMTS bands (I through XIV). Each individual band is identified by its upper case Roman numeral. The order of the band indicators in the string has no significance. In case a new band is defined in the 3GPP standard in a future release of {{bibref|3GPP-TS.25.104}}, the corresponding new upper case Roman numeral will be included in the valid band indicators. The followings are examples of valid values: :\"I\" (specifies only band-I is supported) :\"I,II,V\" (specifies 3 bands are supported) :\"II,VII,I\" (specifies 3 bands are supported)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.FDDBandsSupported";
+ }
+ leaf-list gsm-rx-bands-supported {
+ type enumeration {
+ enum "t-gsm380" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - T-GSM380";
+ }
+ enum "t-gsm410" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - T-GSM410";
+ }
+ enum "gsm450" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - GSM450";
+ }
+ enum "gsm480" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - GSM480";
+ }
+ enum "gsm710" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - GSM710";
+ }
+ enum "gsm750" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - GSM750";
+ }
+ enum "t-gsm810" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - T-GSM810";
+ }
+ enum "gsm850" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - GSM850";
+ }
+ enum "p-gsm900" {
+ value 9;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - P-GSM900";
+ }
+ enum "e-gsm900" {
+ value 10;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - E-GSM900";
+ }
+ enum "r-gsm900" {
+ value 11;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - R-GSM900";
+ }
+ enum "t-gsm900" {
+ value 12;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - T-GSM900";
+ }
+ enum "dcs1800" {
+ value 13;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - DCS1800";
+ }
+ enum "pcs1900" {
+ value 14;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported - PCS1900";
+ }
+ }
+ description
+ "{{list}} Indicates the GSM receive bands that the FAP supports {{bibref|3GPP-TS.45.005}}. At least one band MUST be supported and multiple bands MAY be supported. {{bibref|3GPP-TS.45.005}} defines 14 GSM bands. {{enum}} The order of the band indicators in the string has no significance. The following is an example of a valid value. :\"GSM850,PCS1900\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.GSMRxBandsSupported";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.";
+ }
+
+ grouping capabilities-umts-self-config-g {
+ description
+ "This object contains parameters relating to the self-configuration capabilities of the FAP. Self-configuration is enabled in {{object|.FAPControl.UMTS.SelfConfig.}}";
+ leaf uarfcn-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the UTRA Absolute Radio Frequency Channel Number (UARFCN). If {{true}} multiple values MAY be provided in {{param|.CellConfig.UMTS.RAN.RF.UARFCNDL}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.UMTS.RAN.RF.UARFCNDL}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.UARFCNConfig";
+ }
+ leaf primary-scrambling-code-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Primary Scrambling Code (PSC). If {{true}} multiple values or a range of values MAY be provided in {{param|.CellConfig.UMTS.RAN.RF.PrimaryScramblingCode}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.UMTS.RAN.RF.PrimaryScramblingCode}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.PrimaryScramblingCodeConfig";
+ }
+ leaf maxfap-tx-power-expanded-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Maximum FAP Transmit Power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.UMTS.RAN.RF.MaxFAPTxPowerExpanded}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.UMTS.RAN.RF.MaxFAPTxPowerExpanded}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.MaxFAPTxPowerExpandedConfig";
+ }
+ leaf pcpich-power-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the P-CPICH power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.UMTS.RAN.RF.PCPICHPower}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.UMTS.RAN.RF.PCPICHPower}} as an upper bound.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.PCPICHPowerConfig";
+ }
+ leaf max-ul-tx-power-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Maximum UL Transmit Power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.UMTS.RAN.RF.MaxULTxPower}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.UMTS.RAN.RF.MaxULTxPower}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.MaxULTxPowerConfig";
+ }
+ leaf lacracura-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the LAC, RAC, and URA. If {{true}} multiple values MAY be provided in {{param|.CellConfig.UMTS.CN.LACRAC}} and {{param|.CellConfig.UMTS.RAN.URAList}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.UMTS.CN.LACRAC}} and {{param|.CellConfig.UMTS.RAN.URAList}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.LACRACURAConfig";
+ }
+ leaf neighbor-list-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the neighbor list. If {{true}} the ACS uses the {{object|.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.}}, {{object|.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.}}, {{object|.CellConfig.UMTS.RAN.NeighborList.InterRATCell.}} tables to explicitly include or exclude entries and the FAP uses that information to determine the final configuration found in the {{object|.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.}}, {{object|.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.}}, {{object|.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.}} tables. If {{false}} the ACS uses the {{object|.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.}}, {{object|.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.}}, {{object|.CellConfig.UMTS.RAN.NeighborList.InterRATCell.}} tables to only specify the included entries and the FAP uses that list.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.NeighborListConfig";
+ }
+ leaf cell-re-selection-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine cell-reselection values. If {{true}} {{object|.CellConfig.UMTS.RAN.CellSelection.}} can be self-configured. If {{false}} {{object|.CellConfig.UMTS.RAN.CellSelection.}} is provided by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.CellReSelectionConfig";
+ }
+ leaf intra-freq-meas-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine intra-frequency measurement values. If {{true}} {{object|.CellConfig.UMTS.RAN.IntraFreqMeas.}} can be self-configured. If {{false}} {{object|.CellConfig.UMTS.RAN.IntraFreqMeas.}} is provided by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.IntraFreqMeasConfig";
+ }
+ leaf inter-freq-meas-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine inter-frequency measurement values. If {{true}} {{object|.CellConfig.UMTS.RAN.InterFreqMeas.}} can be self-configured. If {{false}} {{object|.CellConfig.UMTS.RAN.InterFreqMeas.}} is provided by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.InterFreqMeasConfig";
+ }
+ leaf inter-rat-meas-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine inter-RAT measurement values. If {{true}} {{object|.CellConfig.UMTS.RAN.InterRATMeas.}} can be self-configured. If {{false}} {{object|.CellConfig.UMTS.RAN.InterRATMeas.}} is provided by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.InterRATMeasConfig";
+ }
+ leaf ue-internal-meas-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine UE internal measurement values. If {{true}} {{object|.CellConfig.UMTS.RAN.UEInternalMeas.}} can be self-configured. If {{false}} {{object|.CellConfig.UMTS.RAN.UEInternalMeas.}} is provided by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.UEInternalMeasConfig";
+ }
+ leaf noise-rise-limit-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the selfconfiguration capability to determine the Noise Rise Limit. If {{true}} {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitLowerValue}} and {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitUpperValue}}. MAY provide a range of values to select from. If {{false}} {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitUpperValue}} provides only a single value to be used. The value of {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitLowerValue}} is ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.NoiseRiseLimitConfig";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.UMTS.SelfConfig.";
+ }
+
+ grouping capabilities-lte-g {
+ description
+ "This object contains parameters relating to the system and RF aspect of the FAP device that supports the LTE system.";
+ leaf duplex-mode {
+ type enumeration {
+ enum "fdd-mode" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.DuplexMode - FDDMode";
+ }
+ enum "tdd-mode" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.DuplexMode - TDDMode";
+ }
+ }
+ description
+ "Indicates the mode supported by the LTE FAP. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.DuplexMode";
+ }
+ leaf-list bands-supported {
+ type uint8 {
+ range "1..21 | 33..40";
+ }
+ min-elements 1;
+ max-elements "16";
+ description
+ "{{list}} Indicates the LTE bands that the LTE FAP supports {{bibref|3GPP-TS.36.101|Section 5.5}}. At least one band MUST be supported and multiple bands MAY be supported. Each individual band is identified by arabic number (1, 2,...). The order of the band indicators in the string has no significance. In case a new band is defined in the 3GPP standard in a future release of {{bibref|3GPP-TS.36.101}}, the corresponding new band number will be included in the valid band indicators. The followings are examples of valid values: :\"1\" (specifies only band-1 is supported) :\"1,2,11\" (specifies 3 bands are supported) :\"2,11,1\" (specifies 3 bands are supported)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.BandsSupported";
+ }
+ leaf nnsf-supported {
+ type boolean;
+ description
+ "Indicates whether LTE FAP supports the NAS Node Selection Function (NNSF) or not. NNSF is described in {{bibref|3GPP-TS.36.300|Section 19.2.1.7 and Section 4.6.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.NNSFSupported";
+ }
+ leaf umts-rx-supported {
+ type boolean;
+ description
+ "Indicates whether the LTE FAP hardware supports the receiving function of UMTS or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.UMTSRxSupported";
+ }
+ leaf-list umts-rx-bands-supported {
+ type string;
+ max-elements "16";
+ description
+ "{{list}} Indicates the UMTS receive bands that the LTE FAP supports {{bibref|3GPP-TS.25.104}}, Release 8. If {{param|UMTSRxSupported}} is {{true}}, then at least one band MUST be supported and multiple bands MAY be supported. Each individual band is identified by its upper case Roman numeral. The order of the band indicators in the string has no significance. In case a new band is defined in the 3GPP standard in a future release of {{bibref|3GPP-TS.25.104}}, the corresponding new upper case Roman numeral will be included in the valid band indicators. The followings are examples of valid values: :\"I\" (specifies only band-I is supported) :\"I,II,V\" (specifies 3 bands are supported) :\"II,VII,I\" (specifies 3 bands are supported)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.UMTSRxBandsSupported";
+ }
+ leaf gsm-rx-supported {
+ type boolean;
+ description
+ "Indicates whether the LTE FAP hardware supports the receiving function of GSM or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxSupported";
+ }
+ leaf-list gsm-rx-bands-supported {
+ type enumeration {
+ enum "t-gsm380" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - T-GSM380";
+ }
+ enum "t-gsm410" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - T-GSM410";
+ }
+ enum "gsm450" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - GSM450";
+ }
+ enum "gsm480" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - GSM480";
+ }
+ enum "gsm710" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - GSM710";
+ }
+ enum "gsm750" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - GSM750";
+ }
+ enum "t-gsm810" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - T-GSM810";
+ }
+ enum "gsm850" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - GSM850";
+ }
+ enum "p-gsm900" {
+ value 9;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - P-GSM900";
+ }
+ enum "e-gsm900" {
+ value 10;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - E-GSM900";
+ }
+ enum "r-gsm900" {
+ value 11;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - R-GSM900";
+ }
+ enum "t-gsm900" {
+ value 12;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - T-GSM900";
+ }
+ enum "dcs1800" {
+ value 13;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - DCS1800";
+ }
+ enum "pcs1900" {
+ value 14;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported - PCS1900";
+ }
+ }
+ description
+ "{{list}} Indicates the GSM receive bands that the LTE FAP supports {{bibref|3GPP-TS.45.005}}. If {{param|GSMRxSupported}} is {{true}}, then at least one band MUST be supported and multiple bands MAY be supported. {{bibref|3GPP-TS.45.005}} defines 14 GSM bands. {{enum}} The order of the band indicators in the string has no significance. The following is an example of a valid value. :\"GSM850,PCS1900\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.GSMRxBandsSupported";
+ }
+ leaf cdma2000-rx-supported {
+ type boolean;
+ description
+ "Indicates whether the LTE FAP hardware supports the receiving function of CDMA2000 or not.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.CDMA2000RxSupported";
+ }
+ leaf-list cdma2000-rx-bands-supported {
+ type string;
+ max-elements "16";
+ description
+ "{{list}} Indicates the CDMA2000 receive bands that the LTE FAP supports. If {{param|CDMA2000RxSupported}} is {{true}}, then at least one band MUST be supported and multiple bands MAY be supported. The order of the band indicators in the string has no significance. Bandclass is a 1 or 2-digit number as defined in {{bibref|3GPP2-C.S0057-B}}. The following are example values: :\"0\" (specifies US Cellular) :\"1,3,14\" (specifies US PCS, Japan Cellular and US PCS 1.9Ghz) specifies 3 bands are supported)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.CDMA2000RxBandsSupported";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.LTE.";
+ }
+
+ grouping capabilities-cdma2000-g {
+ description
+ "This object contains parameters relating to the capability attributes for CDMA2000 FAP.";
+ leaf remote-ip-access-capable {
+ type boolean;
+ description
+ "Indicates whether the FAP is capable of providing remote IP access service as defined in {{bibref|3GPP2-X.S0059}}. If {{true}}, the FAP is capable of remote IP access service. If {{false}}, the FAP is not capable of remote IP access service.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.RemoteIPAccessCapable";
+ }
+ leaf-list band-class-supportedfap-beacon {
+ type string;
+ max-elements "32";
+ description
+ "{{list}} Indicates the band classes that the FAP supports for beacon transmission. One or multiple bands MAY be supported. Bandclass is a 1 or 2-digit number as defined in {{bibref|3GPP2-C.S0057}}. List is empty if FAP can not support beacon transmissions.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.BandClassSupportedFAPBeacon";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.";
+ }
+
+ grouping capabilities-cdma2000-one-x-g {
+ description
+ "This object contains parameters relating to the capability attributes for the CDMA2000 1x radio technology portions of a CDMA2000 FAP.";
+ leaf band-class-supportedfap {
+ type string {
+ length "0..32";
+ }
+ description
+ "{{list}} Indicates the CDMA bands that the FAP supports. At least one band MUST be supported and multiple bands MAY be supported. Bandclass is a 1 or 2-digit number as defined in {{bibref|3GPP2-C.S0057}}. The following are example values: \"0\" (specifies US Cellular) \"1,3,14\" (specifies US PCS, Japan Cellular and US PCS 1.9Ghz)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.BandClassSupportedFAP";
+ }
+ leaf active-handin-capable {
+ type boolean;
+ description
+ "Indicates whether the FAP is capable of accepting hand-in of active 1x call from another base station. If {{true}}, the FAP is capable of accepting hand-in. If {{false}}, the FAP is not capable of accepting hand-in.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.ActiveHandinCapable";
+ }
+ leaf femto-overhead-messages-capable {
+ type boolean;
+ description
+ "Indicates whether the FAP supports Access Point Identification, Access Point Pilot Information, and Access Point Identification Text messages specified in {{bibref|3GPP2-C.S0005}}. If {{true}}, the FAP supports these messages. If {{false}}, the FAP does not supports these messages.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.";
+ }
+
+ grouping capabilities-cdma2000-one-x-self-config-g {
+ description
+ "This object contains parameters relating to the self-configuration capabilities of the FAP. Self-configuration is enabled in {{object|.FAPControl.CDMA2000.OneX.SelfConfig.}}.";
+ leaf rfcnfl-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Radio Frequency Channel Number. If {{true}} multiple values MAY be provided in {{param|.CellConfig.CDMA2000.OneX.RAN.RF.RFCNFL}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.OneX.RAN.RF.RFCNFL}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.SelfConfig.RFCNFLConfig";
+ }
+ leaf pilot-pn-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the pilot PN offset. If {{true}} multiple values or a range of values MAY be provided in {{param|.CellConfig.CDMA2000.OneX.RAN.RF.PilotPN}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.OneX.RAN.RF.PilotPN}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.SelfConfig.PilotPNConfig";
+ }
+ leaf maxfap-tx-power-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Maximum FAP Transmit Power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.CDMA2000.OneX.RAN.RF.MaxFAPTxPower}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.OneX.RAN.RF.MaxFAPTxPower}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.SelfConfig.MaxFAPTxPowerConfig";
+ }
+ leaf maxfap-beacon-tx-power-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Maximum FAP Beacon Transmit Power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPower}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPower}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.SelfConfig.MaxFAPBeaconTxPowerConfig";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.OneX.SelfConfig.";
+ }
+
+ grouping capabilities-cdma2000-hrpd-g {
+ description
+ "This object contains parameters relating to the capability attributes for the CDMA2000 HRPD radio technology portions of a CDMA2000 FAP.";
+ leaf a13-session-transfer-capable {
+ type boolean;
+ description
+ "Indicates whether the FAP is capable of supporting A13 session transfer. See {{bibref|3GPP2-C.S0024-B}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.A13SessionTransferCapable";
+ }
+ leaf a16-session-transfer-capable {
+ type boolean;
+ description
+ "Indicates whether the FAP is capable of supporting A16 session transfer. See {{bibref|3GPP2-C.S0024-B}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.A16SessionTransferCapable";
+ }
+ leaf local-ip-access-capable {
+ type boolean;
+ description
+ "Indicates whether the FAP is capable of supporting Local IP access. See {{bibref|3GPP2-C.S0024-B}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.LocalIPAccessCapable";
+ }
+ leaf dedicated-hrpd-beacon {
+ type boolean;
+ description
+ "Indicated whether the FAP supports a dedicated transmission of HRPD beacon independent of the generalized beacon.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.DedicatedHRPDBeacon";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.";
+ }
+
+ grouping capabilities-cdma2000-hrpd-self-config-g {
+ description
+ "This object contains parameters relating to the self-configuration capability attributes for the CDMA2000 HRPD radio technology portions of a CDMA2000 FAP.";
+ leaf rfcnfl-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Radio Frequency Channel Number. If {{true}} multiple values MAY be provided in {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.RFCNFL}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.RFCNFL}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.SelfConfig.RFCNFLConfig";
+ }
+ leaf pilot-pn-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the pilot PN offset. If {{true}} multiple values or a range of values MAY be provided in {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.PilotPN}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.PilotPN}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.SelfConfig.PilotPNConfig";
+ }
+ leaf maxfap-tx-power-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Maximum FAP Transmit Power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.MaxFAPTxPower}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.MaxFAPTxPower}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.SelfConfig.MaxFAPTxPowerConfig";
+ }
+ leaf maxfap-beacon-tx-power-config {
+ type boolean;
+ description
+ "Indicates whether the FAP supports the self-configuration capability to determine the Maximum FAP Beacon Transmit Power. If {{true}} a range of values MAY be provided in {{param|.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPower}} for the FAP to select from. If {{false}} only a single value SHOULD be provided in {{param|.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPower}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.SelfConfig.MaxFAPBeaconTxPowerConfig";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Capabilities.CDMA2000.HRPD.SelfConfig.";
+ }
+
+ grouping fap-control-g {
+ description
+ "This object contains parameters relating to state management and provisioning aspects of the FAP.";
+ leaf-list self-config-events {
+ type enumeration {
+ enum "initial-rem" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.SelfConfigEvents - InitialREM";
+ }
+ }
+ config false;
+ description
+ "{{list}} Each item is an event that causes the FAP to perform self configuration as defined by {{object|.FAPControl.UMTS.SelfConfig.}}, {{object|.FAPControl.CDMA2000.OneX.SelfConfig.}}, or {{object|.FAPControl.CDMA2000.HRPD.SelfConfig.}}. Vendors can extend the enumerated values with vendor-specific extensions, in which case the rules outlined in {{bibref|TR-106a2|Section3.3}} MUST be adhered to.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.SelfConfigEvents";
+ }
+ leaf enclosure-tampering-detected {
+ type boolean;
+ config false;
+ description
+ "This parameter indicates whether or not physical tampering of the device enclosure occurred, such as illegal opening of the box. If {{true}} device tampering is detected. If {{false}} no sign of device tampering is detected. Tampering state MUST be persisted across reboots and the device MUST never reset it back from {{true}} to {{false}} even after a factory reset.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.EnclosureTamperingDetected";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.";
+ }
+
+ grouping fap-control-umts-g {
+ description
+ "This object contains parameters relating to the UMTS system specific information.";
+ leaf op-state {
+ type boolean;
+ description
+ "Current operational state of the UMTS FAP as defined in {{bibref|ITU-X.731}}. If {{true}} the UMTS FAP is currently enabled. If {{false}} the UMTS FAP is currently disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.OpState";
+ }
+ leaf admin-state {
+ type boolean;
+ config false;
+ description
+ "Lock or unlock the UMTS FAP. This controls the administrative state of the UMTS FAP as defined in {{bibref|ITU-X.731}}. If {{true}} Unlocked with permission to serve traffic (and enable RF transmitter(s)). If {{false}} Locked. Transition UMTS FAP to state where it is NOT permitted to serve traffic. RF transmitter is disabled. Given that this command controls the UMTS FAP's RF transmitter, the underlying expectation is that the unlock is done when all necessary conditions are met to allow the transmitter to key on and provide service, including aspects such as: # location verification (including meeting the governing regulatory requirements) # verifying the UMTS FAP configuration # if physical tampering is supported and no physical tampering is detected. The default value after power-on is {{false}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.AdminState";
+ }
+ leaf rf-tx-status {
+ type boolean;
+ description
+ "Current status of this UMTS FAP RF transmitter. {{true}} indicates that the UMTS FAP Tx transmitter is on. {{false}} indicates that the UMTS FAP Tx transmitter is off. This state is tied to the Administrative state which is controlled by the ACS. :When the ACS sets {{param|AdminState}} to {{true}}, then the UMTS FAP has permission to turn on the RF transmitter. :When the ACS sets {{param|AdminState}} to {{false}}, then the UMTS FAP is not allowed to provide service and MUST turn off the RF transmitter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.RFTxStatus";
+ }
+ leaf pm-config {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The value MUST be the path name of a row in the optional ''FAP.PerfMgmt.Config.'' table (see {{bibref|TR-262}}). This is the performance management related configuration for the UMTS FAP. In case of a multiple-radio-technology FAP product, each radio technology can have its own PM configuration or share a common PM configuration. In the former case, {{param}} can contain a unique instance number. In the latter case, {{param}} under all radio technologies can have the same instance number. If the referenced object is deleted, the parameter value MUST be set to an empty string.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.PMConfig";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.";
+ }
+
+ grouping fap-control-umts-self-config-g {
+ description
+ "This object contains parameters relating to the controlling of self-configuration capabilities in the FAP.";
+ leaf uarfcn-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the values of {{param|.CellConfig.UMTS.RAN.CSG.UARFCNDLList}}. If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.UARFCNSelfConfigEnable";
+ }
+ leaf primary-scrambling-code-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.UMTS.RAN.RF.PrimaryScramblingCode}}. If {{true}} the FAP self-configures the value. If {{false}} the ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.PrimaryScramblingCodeSelfConfigEnable";
+ }
+ leaf maxfap-tx-power-expanded-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.UMTS.RAN.RF.MaxFAPTxPowerExpanded}}. If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.MaxFAPTxPowerExpandedSelfConfigEnable";
+ }
+ leaf pcpich-power-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.UMTS.RAN.RF.PCPICHPower}}. If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.PCPICHPowerSelfConfigEnable";
+ }
+ leaf max-ul-tx-power-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.UMTS.RAN.RF.MaxULTxPower}}. If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.MaxULTxPowerSelfConfigEnable";
+ }
+ leaf lacracura-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the values of {{param|.CellConfig.UMTS.CN.LACRAC}} and {{param|.CellConfig.UMTS.RAN.URAList}}. If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.LACRACURASelfConfigEnable";
+ }
+ leaf neighbor-list-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the values in the object {{object|.CellConfig.UMTS.RAN.NeighborList.}} If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.NeighborListSelfConfigEnable";
+ }
+ leaf cell-re-selection-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine Cell Selection/Reselection-related parameters in {{object|.CellConfig.UMTS.RAN.CellSelection.}} If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.CellReSelectionSelfConfigEnable";
+ }
+ leaf intra-freq-meas-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine intra-frequency measurement -related parameters in {{object|.CellConfig.UMTS.RAN.IntraFreqMeas.}} If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.IntraFreqMeasSelfConfigEnable";
+ }
+ leaf inter-freq-meas-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine inter-frequency measurement -related parameters in {{object|.CellConfig.UMTS.RAN.InterFreqMeas.}} If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.InterFreqMeasSelfConfigEnable";
+ }
+ leaf inter-rat-meas-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine inter-RAT measurement -related parameters in {{object|.CellConfig.UMTS.RAN.InterRATMeas.}} If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.InterRATMeasSelfConfigEnable";
+ }
+ leaf ue-internal-meas-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine UE internal measurement-related parameters in {{object|.CellConfig.UMTS.RAN.UEInternalMeas.}} If {{true}} The FAP self-configures the value. If {{false}} The ACS MUST provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.UEInternalMeasConfigEnable";
+ }
+ leaf noise-rise-limit-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitInUse}}. If {{true}} the FAP self-configures the value, based on the limits specified in {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitLowerValue}} and {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitUpperValue}}. If {{false}} the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.NoiseRiseLimitConfigEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.SelfConfig.";
+ }
+
+ grouping fap-control-umts-gateway-g {
+ description
+ "This object contains parameters relating to the Gateways that FAP is connected to.";
+ leaf sec-gw-server1 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "First SecGW the FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.SecGWServer1";
+ }
+ leaf sec-gw-server2 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Second SecGW the FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.SecGWServer2";
+ }
+ leaf sec-gw-server3 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Third SecGW the FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.SecGWServer3";
+ }
+ leaf fap-gw-server1 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "First FAPGW the FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.FAPGWServer1";
+ }
+ leaf fap-gw-server2 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Second FAPGW the FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.FAPGWServer2";
+ }
+ leaf fap-gw-server3 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Third FAPGW the FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.FAPGWServer3";
+ }
+ leaf fap-gw-port {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Port number of FAPGW used for initial Iuh SCTP contact. This value is specified as 29169 according to IANA definition per {{bibref|IANA-portnumbers}}, registered on 2009-09-08. Use of IANA-defined value is recommended.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.FAPGWPort";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.UMTS.Gateway.";
+ }
+
+ grouping fap-control-lte-g {
+ description
+ "This object contains parameters relating to the LTE system specific information.";
+ leaf op-state {
+ type boolean;
+ description
+ "Current operational state of the LTE FAP as defined in {{bibref|ITU-X.731}}. If {{true}} the LTE FAP is currently enabled. If {{false}} the LTE FAP is currently disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.OpState";
+ }
+ leaf admin-state {
+ type boolean;
+ config false;
+ description
+ "Lock or unlock the LTE FAP. This controls the administrative state of the LTE FAP as defined in {{bibref|ITU-X.731}}. If {{true}} Unlocked with permission to serve traffic (and enable RF transmitter(s)). If {{false}} Locked. Transition LTE FAP to state where it is NOT permitted to serve traffic. RF transmitter is disabled. Given that this command controls the LTE FAP's RF transmitter, the underlying expectation is that the unlock is done when all necessary conditions are met to allow the transmitter to key on and provide service, including aspects such as: # location verification (including meeting the governing regulatory requirements) # verifying the LTE FAP configuration # if physical tampering is supported and no physical tampering is detected. The default value after power-on is {{false}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.AdminState";
+ }
+ leaf rf-tx-status {
+ type boolean;
+ description
+ "Current status of this LTE FAP RF transmitter. {{true}} indicates that the LTE FAP Tx transmitter is on. {{false}} indicates that the LTE FAP Tx transmitter is off. This state is tied to the Administrative state which is controlled by the ACS. :When the ACS sets {{param|AdminState}} to {{true}}, then the LTE FAP has permission to turn on the RF transmitter. :When the ACS sets {{param|AdminState}} to {{false}}, then the LTE FAP is not allowed to provide service and MUST turn off the RF transmitter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.RFTxStatus";
+ }
+ leaf pm-config {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The value MUST be the path name of a row in optional the ''.FAP.PerfMgmt.Config.'' table (see {{bibref|TR-262}}). This is the performance management related configuration for the LTE FAP. In case of a multiple-radio-technology FAP product, each radio technology can have its own PM configuration or share a common PM configuration. In the former case, {{param}} can contain a unique instance number. In the latter case, {{param}} under all radio technologies can have the same instance number. If the referenced object is deleted, the parameter value MUST be set to an empty string.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.PMConfig";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.";
+ }
+
+ grouping fap-control-lte-gateway-g {
+ description
+ "This object contains parameters relating to the Gateways that the LTE FAP is connected to.";
+ leaf sec-gw-server1 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "First SecGW the LTE FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.SecGWServer1";
+ }
+ leaf sec-gw-server2 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Second SecGW the LTE FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.SecGWServer2";
+ }
+ leaf sec-gw-server3 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Third SecGW the LTE FAP attempts to establish connection with. Either hostname or IPaddress.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.SecGWServer3";
+ }
+ leaf-list s1-sig-link-server-list {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a S1 signaling connection end point (-GW or MME) the LTE FAP attempts to establish connection with. It is in the form of either hostname or IPaddress. LTE FAP's behavior in terms of the number of S1 connection to established with is determined by {{param|S1ConnectionMode}} parameter. If {{param|S1ConnectionMode}} has the value of {{enum|One|S1ConnectionMode}}, then LTE FAP attempts to establish S1 connection with only one address following the ordering of the list. If {{param|S1ConnectionMode}} has the value of {{enum|All|S1ConnectionMode}}, then LTE FAP attempts to establish connection with all addresses in the list.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.S1SigLinkServerList";
+ }
+ leaf s1-connection-mode {
+ type enumeration {
+ enum "one" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.S1ConnectionMode - One";
+ }
+ enum "all" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.S1ConnectionMode - All";
+ }
+ }
+ config false;
+ description
+ "Indicates how many of the configured far-end S1 link address(es),as defined in {{param|S1SigLinkServerList}}, LTE FAP SHOULD attempt to establish connection with simultaneously. If {{param}} parameter is not explicitly configured, then LTE FAP shall assume the value to be {{enum|One|S1ConnectionMode}} as default.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.S1ConnectionMode";
+ }
+ leaf s1-sig-link-port {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Port number of S1AP signaling connection end point (-GW or MME) used for initial S1 SCTP contact. This value is specified as 36412 according to IANA definition per {{bibref|IANA-portnumbers}}, registered on 2009-09-01. Use of IANA-defined value is recommended.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.S1SigLinkPort";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.LTE.Gateway.";
+ }
+
+ grouping fap-control-cdma2000-g {
+ description
+ "This object contains parameters relating to the configuration for the control portions of a CDMA2000 FAP.";
+ leaf home-domain {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "A string containing one of operator's home domains in URI format. FAP is preconfigured with a default home domain, which can be overwritten later by ACS. See {{bibref|3GPP2-X.S0059}}. If the''.ManagementServer.URL'' is null, then the FAP shall use the value of this attribute to construct the ''.ManagementServer.URL'' attribute. If {{param|.FAPControl.CDMA2000.Gateway.SecGWServer1}} is null, then the FAP shall use the value of this attribute to construct the {{param|.FAPControl.CDMA2000.Gateway.SecGWServer1}} attribute. If the FAP is unable to connect to the management server indicated by the value of the ''.ManagementServer.URL'' attribute and this attribute is not null, the FAP may use the value of this attribute to construct the ''.ManagementServer.URL'' attribute. If the FAP is unable to connect to any security gateway indicated by the value of the {{param|.FAPControl.CDMA2000.Gateway.SecGWServer1}}, {{param|.FAPControl.CDMA2000.Gateway.SecGWServer2}}, and {{param|.FAPControl.CDMA2000.Gateway.SecGWServer3}} attributes and this attribute is not null, the FAP may use the value of this attribute to construct the {{param|.FAPControl.CDMA2000.Gateway.SecGWServer1}} attribute.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HomeDomain";
+ }
+ leaf remote-ip-access-enable {
+ type boolean;
+ config false;
+ description
+ "Enable or disable remote IP access service as defined in {{bibref|3GPP2-X.S0059}}. If {{true}} remote IP access is enabled. If {{false}} remove IP access is disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.RemoteIPAccessEnable";
+ }
+ leaf pm-config {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The value MUST be the path name of a row in the ''.FAP.PerfMgmt.Config.'' table. This is the performance management related configuration for the CDMA2000 FAP. In case of a multiple-radio-technology FAP product, each radio technology can have its own PM configuration or share a common PM configuration. In the former case, {{param}} can contain a unique instance number. In the latter case, {{param}} under all radio technologies can have the same instance number. If the referenced object is deleted, the parameter value MUST be set to an empty string.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.PMConfig";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.";
+ }
+
+ grouping fap-control-cdma2000-time-g {
+ description
+ "This object contains parameters related to time syncronization with CDMA2000 System Time (see {{bibref|3GPP2-C.S0005}}).";
+ leaf local-time-zone {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The local time zone for CDMA2000 operational purposes. E.g., \"+HH:MM JST\" for Japan. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Time.LocalTimeZone";
+ }
+ leaf current-local-time {
+ type string {
+ length "0..64";
+ }
+ description
+ "The current CDMA System Time (see {{bibref|3GPP2-C.S0005}}), expressed as date and time in the CPE's local time zone. The format of this field is \"YYYY-MM-DDThh:mm:ss.sTZD\" (e.g., 1997-07-16T19:20:30.45+01:00), where: YYYY = four-digit year MM = two-digit month (01=January, etc.) DD = two-digit day of month (01 through 31) hh = two digits of hour (00 through 23) (am/pm NOT allowed) mm = two digits of minute (00 through 59) ss = two digits of second (00 through 59) s = one or more digits representing a decimal fraction of a second TZD = time zone designator (Z or +hh:mm or -hh:mm)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Time.CurrentLocalTime";
+ }
+ leaf leap-seconds {
+ type int64;
+ units "seconds";
+ config false;
+ description
+ "Number of leap seconds (in {{units}} to be applied between CurrentLocalTime and CDMA System Time. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Time.LeapSeconds";
+ }
+ leaf daylight-savings-used {
+ type boolean;
+ config false;
+ description
+ "Whether or not daylight savings time is in use in the FAP's local time zone with respect to CDMA2000 System Time (see {{bibref|3GPP2-C.S0005}}). {true}} if daylight savings time is being used; otherwise {{false}}. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Time.DaylightSavingsUsed";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Time.";
+ }
+
+ grouping fap-control-cdma2000-one-x-g {
+ description
+ "This object contains all global attributes of the 1xFemto application.";
+ leaf admin-state {
+ type enumeration {
+ enum "lock" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.AdminState - Lock";
+ }
+ enum "unlock" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.AdminState - Unlock";
+ }
+ }
+ config false;
+ description
+ "Administrative state for 1x";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.AdminState";
+ }
+ leaf op-state {
+ type enumeration {
+ enum "enabled" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.OpState - Enabled";
+ }
+ enum "disabled" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.OpState - Disabled";
+ }
+ }
+ description
+ "Operational state of the 1x";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.OpState";
+ }
+ leaf rf-tx-status {
+ type boolean;
+ description
+ "Current status of this RF transmitter. {{true}} indicates that the 3G Tx transmitter is on. {{false}} indicates that the 3G Tx transmitter is off. This state is tied to the Administrative state which is controlled by the ACS. When the ACS sets AdminState to {{true}}, then the FAP has permission to turn on the RF transmitter. When the ACS sets AdminState to {{false}}, then the FAP is not allowed to provide service and MUST turn off the RF transmitter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.RFTxStatus";
+ }
+ leaf daylight {
+ type int64;
+ config false;
+ description
+ "If Daylight Savings Time is being used with respect to CDMA2000 1x overhead parameters (see {{bibref|3GPP2-C.S0005}}), then {{param}} should be set to {{true}}. Otherwise, {{param}} should be set to {{false}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.Daylight";
+ }
+ leaf max-p-rev {
+ type int64;
+ config false;
+ description
+ "Protocol revision supported by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.MaxPRev";
+ }
+ leaf reregister {
+ type uint64;
+ config false;
+ description
+ "{{param}} triggers a re-registration of all mobiles. The FAP triggers re-registration of all registered mobiles everytime this number changes";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.Reregister";
+ }
+ leaf emergency-session-period {
+ type uint16 {
+ range "15..1800";
+ }
+ units "seconds";
+ config false;
+ description
+ "The period (in {{units}}) the session of an unauthorized user is kept alive after an emergency call.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.EmergencySessionPeriod";
+ }
+ leaf location-area-code {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "This is the location area code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.LocationAreaCode";
+ }
+ leaf msc-id {
+ type uint64;
+ config false;
+ description
+ "This is the FAP's MSCID. This ID is used in PANI header.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.MSCId";
+ }
+ leaf active-handin-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the FAP performs active hand-in from another base station. If {{true}} active hand-in is enabled; if {{false}} active hand-in is disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.ActiveHandinEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.";
+ }
+
+ grouping fap-control-cdma2000-one-x-active-handin-measurement-g {
+ description
+ "CDMA2000 1x active handin operational parameters.";
+ leaf active-handin-measurement-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the FAP performs active hand-in measurement if a request is received. If {{true}} active hand-in measurement is enabled; if {{false}} active hand-in measurement is disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.ActiveHandinMeasurement.ActiveHandinMeasurementEnable";
+ }
+ leaf active-hand-in-measurement-duration {
+ type uint16 {
+ range "0..65535";
+ }
+ units "1.25 ms slots";
+ config false;
+ description
+ "The minimum duration in {{units}} for which FAP should take a mobile's RL pilot strength measurements for active hand-in purpose when directed by the network. Instead of continuous measurement for this entire duration, a FAP can make multiple measurements by sampling over shorter durations. In such a case, this value specifies the minimum time separation required between the first and last measurement samples.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.ActiveHandinMeasurement.ActiveHandInMeasurementDuration";
+ }
+ leaf measurement-report-threshold {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "The threshold (in {{units}}) for the FAP to report an active hand-in measurement. If the metric to be reported is below the threshold, the FAP may not send any report.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.ActiveHandinMeasurement.MeasurementReportThreshold";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.ActiveHandinMeasurement.";
+ }
+
+ grouping fap-control-cdma2000-one-x-self-config-g {
+ description
+ "This object contains parameters relating to the controlling of self-configuration capabilities in the FAP.";
+ leaf rfcnfl-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the values of {{param|.CellConfig.CDMA2000.OneX.RAN.RF.RFCNFL}}. If {{true}}, the FAP self-configures the value. If {{false}}, the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.SelfConfig.RFCNFLSelfConfigEnable";
+ }
+ leaf pilot-pn-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.CDMA2000.OneX.RAN.RF.PilotPN}}. If {{true}} the FAP self-configures the value. If {{false}} the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.SelfConfig.PilotPNSelfConfigEnable";
+ }
+ leaf maxfap-tx-power-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.CDMA2000.OneX.RAN.RF.MaxFAPTxPower}}. If {{true}} the FAP self-configures the value. If {{false}} the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.SelfConfig.MaxFAPTxPowerSelfConfigEnable";
+ }
+ leaf maxfap-beacon-tx-power-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPower}}. If {{true}}, the FAP self-configures the value. If {{false}}, the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.SelfConfig.MaxFAPBeaconTxPowerSelfConfigEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.OneX.SelfConfig.";
+ }
+
+ grouping fap-control-cdma2000-gateway-g {
+ description
+ "CDMA2000 FAP Security Gateway operational parameters.";
+ leaf sec-gw-server1 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "First SecGW the FAP attempts to contact. Either FQDN or IP address";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Gateway.SecGWServer1";
+ }
+ leaf sec-gw-server2 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Second SecGW the FAP attempts to contact. Either FQDN or IP address";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Gateway.SecGWServer2";
+ }
+ leaf sec-gw-server3 {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Third SecGW that the FAP attempts to contact. Can contain either FQDN or IP address";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Gateway.SecGWServer3";
+ }
+ leaf sec-gw-switchover-count {
+ type uint64;
+ description
+ "Counter indicating how many times FAP has switched between SecGW";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Gateway.SecGWSwitchoverCount";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.Gateway.";
+ }
+
+ grouping fap-control-cdma2000-hrpd-g {
+ description
+ "Operational parameters for the HRPD portion of a CDMA2000 FAP.";
+ leaf op-state {
+ type boolean;
+ description
+ "Current operational state of the FAP as defined in ITU-X.731 [32]. If {{true}} the FAP is currently enabled. If {{false}} the FAP is currently disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.OpState";
+ }
+ leaf admin-state {
+ type boolean;
+ config false;
+ description
+ "Lock or unlock the FAP. This controls the administrative state of the FAP as defined in ITU-X.731 [32]. If {{true}} Unlocked with permission to serve traffic (and enable RF transmitter(s)). If {{false}} Locked. Transition FAP to state where it is NOT permitted to serve traffic. RF transmitter is disabled. Given that this command controls the FAP's RF transmitter, the underlying expectation is that the unlock is done when all necessary conditions are met to allow the transmitter to key on and provide service, including aspects such as: location verification (including meeting the governing regulatory requirements) verifying the FAP configuration if physical tampering is supported and no physical tampering is detected. The default value after power-on is {{false}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.AdminState";
+ }
+ leaf rf-tx-status {
+ type boolean;
+ description
+ "Current status of this RF transmitter. {{true}} indicates that the 3G Tx transmitter is on. {{false}} indicates that the 3G Tx transmitter is off. This state is tied to the Administrative state which is controlled by the ACS. When the ACS sets AdminState to {{true}}, then the FAP has permission to turn on the RF transmitter. When the ACS sets AdminState to {{false}}, then the FAP is not allowed to provide service and MUST turn off the RF transmitter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.RFTxStatus";
+ }
+ leaf a13-session-transfer-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the FAP performs A13 session transfer. If {{true}} A13 session transfer is enabled; if {{false}} A13 session transfer is disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13SessionTransferEnable";
+ }
+ leaf local-ip-access-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the FAP can assign local IP address to capable ATs. If {{true}} local IP address is assigned.; if {{false}} local IP address is not assigned.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.LocalIPAccessEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.";
+ }
+
+ grouping fap-control-cdma2000-hrpd-self-config-g {
+ description
+ "This object contains parameters relating to the controlling of self-configuration capabilities in the FAP.";
+ leaf rfcnfl-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the values of {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.RFCNFL}}. If {{true}}, the FAP self-configures the value. If {{false}}, the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.SelfConfig.RFCNFLSelfConfigEnable";
+ }
+ leaf pilot-pn-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.PilotPN}}. If {{true}}, the FAP self-configures the value. If {{false}}, the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.SelfConfig.PilotPNSelfConfigEnable";
+ }
+ leaf maxfap-tx-power-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.CDMA2000.HRPD.RAN.RF.MaxFAPTxPower}} . If {{true}}, the FAP self-configures the value. If {{false}}, the ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.SelfConfig.MaxFAPTxPowerSelfConfigEnable";
+ }
+ leaf max-hrpd-beacon-tx-power-self-config-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the self-configuration capability in the FAP is used or not to determine the value of {{param|.CellConfig.CDMA2000.Beacon.MaxHRPDBeaconTxPower}}. If {{true}} the FAP self-configures the value. If {{false}} The ACS must provide the specific value to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.SelfConfig.MaxHRPDBeaconTxPowerSelfConfigEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.SelfConfig.";
+ }
+
+ grouping fap-control-cdma2000-hrpd-a13-g {
+ description
+ "This object contains attributes related to A13 Session Transfer";
+ leaf color-code-to-uati104-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104NumberOfEntries";
+ }
+ leaf hrpd-subnet-to-ip-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIPNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.";
+ }
+
+ grouping fap-control-cdma2000-hrpd-a13-color-code-to-uati104-g {
+ description
+ "HRPD ColorCode to UATI Mapping Table number of entries.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}.Alias";
+ }
+ leaf color-code {
+ type uint16 {
+ range "0..256";
+ }
+ description
+ "Color Code mapped to UATI104 in the following field";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}.ColorCode";
+ }
+ leaf uati104 {
+ type binary {
+ length "0..13";
+ }
+ description
+ "The UATI104 of the AT that accesses with the ColorCode field";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}.UATI104";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}.";
+ }
+
+ grouping fap-control-cdma2000-hrpd-a13-hrpd-subnet-to-ip-g {
+ description
+ "This object contains attributes related to A13 Session Transfer";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.Alias";
+ }
+ leaf hrpd-subnet-length {
+ type uint8 {
+ range "1..104";
+ }
+ units "bits";
+ config false;
+ description
+ "The number of MSBs (in {{units}}) in the following field that is part of HRPDSubnet";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.HRPDSubnetLength";
+ }
+ leaf hrpd-subnet {
+ type binary {
+ length "0..13";
+ }
+ config false;
+ description
+ "The {{param|HRPDSubnetLength}} MSBs of this field contain the HRPD subnet that maps to the IP address in the following field";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.HRPDSubnet";
+ }
+ leaf a13-ip-address {
+ type inet:ip-address;
+ description
+ "This field contains the IP address of A13 endpoint that corresponds to the HRPD subnet";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.A13IPAddress";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}.";
+ }
+
+ grouping access-mgmt-g {
+ description
+ "This object contains parameters relating to Access Management for the different radio technologies.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.";
+ }
+
+ grouping access-mgmt-umts-g {
+ description
+ "This object contains parameters relating to Access Management for UMTS FAP (ACL, CSG, LIPA). Closed Subscriber Group (CSG) service behavior is specified in {{bibref|3GPP-TS.22.011}}. Note: Cell barring and 3GPP access class parameters are contained in {{object|.CellConfig.UMTS.RAN.CellRestriction.}} (UMTS FAP).";
+ leaf access-mode {
+ type enumeration {
+ enum "open access" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.AccessMode - Open Access";
+ }
+ enum "closed access" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.AccessMode - Closed Access";
+ }
+ enum "hybrid access" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.AccessMode - Hybrid Access";
+ }
+ }
+ default "open access";
+ config false;
+ description
+ "Indicates the type of access mode the FAP operates in. {{enum}} When the value is not {{enum|Open Access}} non-CSG-capable UE are handled according to {{param|NonCSGUEAccessDecision}}. Note: This parameter controls the setting of the CSGindicator bit, specified in MIB in {{bibref|3GPP-TS.25.331}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.AccessMode";
+ }
+ leaf non-csgue-access-decision {
+ type enumeration {
+ enum "local" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.NonCSGUEAccessDecision - Local";
+ }
+ enum "query fap-gw" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.NonCSGUEAccessDecision - Query FAPGW";
+ }
+ enum "by core" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.NonCSGUEAccessDecision - By Core";
+ }
+ }
+ default "local";
+ config false;
+ description
+ "Indicates how the access decision is made for non-CSG-capable UE. Parameter is ignored when {{param|AccessMode}} is {{enum|Open Access|AccessMode}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.NonCSGUEAccessDecision";
+ }
+ leaf csg-membership-determined-locally {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Indicates how the access decision is made for CSG-capable UE. Parameter is ignored when {{param|AccessMode}} is {{enum|Open Access|AccessMode}}. If {{true}} access decision is determined the same way as for {{param|NonCSGUEAccessDecision}}. (E.g. if core network doesn't (yet) support full CSG functionality.) If {{false}} FAP always allows access for CSG-capable UE. CSG enforcement is performed by MSC/SGSN (with support from HSS), or by FGW. {{bibref|3GPP-TS.22.011}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.CSGMembershipDeterminedLocally";
+ }
+ leaf max-u-es-served {
+ type int64;
+ default "-1";
+ config false;
+ description
+ "Maximum number of concurrent UEs allowed at a cell. Valid for any {{param|AccessMode}}. A value of -1 allows an unlimited number of concurrent UEs up to the limit of FAP capacity. The setting does not affect emergency calls.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MaxUEsServed";
+ }
+ leaf max-csg-members {
+ type int64;
+ default "-1";
+ config false;
+ description
+ "Maximum number of concurrent CSG member UEs allowed at a hybrid or closed cell. A value of -1 allows an unlimited number of CSG members up to the limit of FAP capacity. The setting cannot be larger than the value of {{param|MaxUEsServed}}. The setting does not affect emergency calls. {{bibref|3GPP-TS.22.011}}, {{bibref|3GPP-TS.22.220}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MaxCSGMembers";
+ }
+ leaf max-non-csg-members {
+ type int64;
+ default "-1";
+ config false;
+ description
+ "Maximum number of concurerent non-CSG member UEs allowed at a hybrid cell. Valid only if {{param|AccessMode}} is {{enum|Hybrid Access|AccessMode}}. The setting cannot be larger than the value of {{param|MaxUEsServed}}. The setting does not affect emergency calls.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MaxNonCSGMembers";
+ }
+ leaf max-resource-non-csg-members {
+ type uint8 {
+ range "0..100";
+ }
+ config false;
+ description
+ "Maximum percentage of physical resource that can be assigned to non-CSG members aggregately at one time. In UMTS FAP, this applies to RB resource.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MaxResourceNonCSGMembers";
+ }
+ leaf hnb-name {
+ type string {
+ length "0..48";
+ }
+ config false;
+ description
+ "Home NodeB name. An operator-defined string that is broadcast by a CSG cell or a hybrid cell and displayed on the UE for the purpose of manual cell selection or indication that the UE is camped on the cell as specified in {{bibref|3GPP-TS.22.220|Section 5.4.2}}. Corresponds to parameter 'hnb-Name' specified in SIB20 in {{bibref|3GPP-TS.25.331|Section 10.2.48.8.23}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.HNBName";
+ }
+ leaf csgid {
+ type uint32 {
+ range "0..134217727";
+ }
+ config false;
+ description
+ "Defines the Closed Subscriber Group of the Access Control List. The UMTS FAP broadcasts this CSG ID in SIB3 depending on the AccessMode. The LTE FAP broadcasts this in SIB1, and corresponds to parameter csg-Identity in SIB1 in {{bibref|3GPP-TS.36.331}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.CSGID";
+ }
+ leaf-list access-control-list {
+ type string {
+ length "0..15";
+ }
+ config false;
+ max-elements "1024";
+ description
+ "{{list}} Each entry is an IMSI.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.AccessControlList";
+ }
+ leaf max-member-detail-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.AccessMgmt.UMTS.MemberDetail.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MaxMemberDetailEntries";
+ }
+ leaf member-detail-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetailNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.";
+ }
+
+ grouping access-mgmt-umts-member-detail-g {
+ description
+ "Details for CSG and Non-CSG members.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the MemberDetail entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.Alias";
+ }
+ leaf imsi {
+ type string {
+ length "0..15";
+ }
+ description
+ "International Mobile Subscriber Identity of the UE.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.IMSI";
+ }
+ leaf msisdn {
+ type string {
+ length "0..15";
+ }
+ config false;
+ description
+ "Mobile Station International Subscriber Identity Number. Set to {{empty}} if unknown.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.MSISDN";
+ }
+ leaf membership-expires {
+ type yang:date-and-time;
+ config false;
+ description
+ "Time when the ACL membership expires. An Unknown Time value, as defined in {{bibref|TR-106a2|Section 3.2}}, indicates that the membership doesn't expire. Upon expiry the FAP MUST remove the IMSI from the {{param|.AccessMgmt.UMTS.AccessControlList}}, but the entry in {{object|.AccessMgmt.UMTS.MemberDetail.{i}.}} remains. {{bibref|3GPP-TS.22.011}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.MembershipExpires";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}.";
+ }
+
+ grouping access-mgmt-umts-local-ip-access-g {
+ description
+ "Local IP access for UMTS FAP.";
+ leaf enable {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Enables/disables the Local IP Access (LIPA) functionality.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.LocalIPAccess.Enable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.UMTS.LocalIPAccess.";
+ }
+
+ grouping access-mgmt-lte-g {
+ description
+ "This object contains parameters relating to Access Management, as defined in {{bibref|3GPP-TS.32.592}}/ Closed Subscriber Group (CSG) service behavior is specified in {{bibref|3GPP-TS.22.011}}. Note: Cell barring and 3GPP access class parameters are contained in SIB1 in {{bibref|3GPP-TS.36.331}}.";
+ leaf access-mode {
+ type enumeration {
+ enum "open access" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.AccessMode - Open Access";
+ }
+ enum "closed access" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.AccessMode - Closed Access";
+ }
+ enum "hybrid access" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.AccessMode - Hybrid Access";
+ }
+ }
+ default "open access";
+ config false;
+ description
+ "Indicates the type of access mode the FAP operates in. {{enum}} Note: This parameter controls the setting of the CSGindicator bit, specified in SIB1 in {{bibref|3GPP-TS.36.331}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.AccessMode";
+ }
+ leaf max-u-es-served {
+ type int64;
+ default "-1";
+ config false;
+ description
+ "Maximum number of concurrent UEs allowed at a cell. Valid for any {{param|AccessMode}}. A value of -1 allows an unlimited number of concurrent UEs up to the limit of FAP capacity. The setting does not affect emergency calls.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.MaxUEsServed";
+ }
+ leaf max-csg-members {
+ type int64;
+ default "-1";
+ config false;
+ description
+ "Maximum number of concurrent CSG member UEs allowed at a hybrid or closed cell. A value of -1 allows an unlimited number of CSG members up to the limit of FAP capacity. The setting cannot be larger than the value of {{param|MaxUEsServed}}. The setting does not affect emergency calls. {{bibref|3GPP-TS.22.011}}, {{bibref|3GPP-TS.22.220}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.MaxCSGMembers";
+ }
+ leaf max-non-csg-members {
+ type int64;
+ default "-1";
+ config false;
+ description
+ "Maximum number of concurerent non-CSG member UEs allowed at a hybrid cell. Valid only if {{param|AccessMode}} is {{enum|Hybrid Access|AccessMode}}. The setting cannot be larger than the value of {{param|MaxUEsServed}}. The setting does not affect emergency calls.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.MaxNonCSGMembers";
+ }
+ leaf max-resource-non-csg-members {
+ type uint8 {
+ range "0..100";
+ }
+ config false;
+ description
+ "Maximum percentage of physical resource that can be assigned to non-CSG members aggregately at one time. This applies to PDSCH physical resource blocks.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.MaxResourceNonCSGMembers";
+ }
+ leaf csgid {
+ type uint32 {
+ range "0..134217727";
+ }
+ config false;
+ description
+ "Defines the Closed Subscriber Group of the Access Control List. The LTE FAP broadcasts this in SIB1, and corresponds to parameter csg-Identity in SIB1 in {{bibref|3GPP-TS.36.331}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.CSGID";
+ }
+ leaf hnb-name {
+ type string {
+ length "0..48";
+ }
+ config false;
+ description
+ "Home NodeB name. An operator-defined string that is broadcast by a CSG cell or a hybrid cell and displayed on the UE for the purpose of manual cell selection or indication that the UE is camped on the cell as specified in {{bibref|3GPP-TS.22.220|Section 5.4.2}}. Corresponds to parameter 'hnb-Name' specified in SIB9 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.HNBName";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.";
+ }
+
+ grouping access-mgmt-lte-local-ip-access-g {
+ description
+ "Local IP access for LTE FAP.";
+ leaf enable {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Enables/disables the Local IP Access (LIPA) functionality.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.LocalIPAccess.Enable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.LTE.LocalIPAccess.";
+ }
+
+ grouping access-mgmt-cdma2000-g {
+ description
+ "This object contains configurable and observable attributes related to CDMA2000 Access and Admission Control of the FAP.";
+ leaf access-mode {
+ type uint8 {
+ range "0 | 1 | 3";
+ }
+ config false;
+ description
+ "Defines the access control mode of FAP. Allowed modes are Open, Closed, and Signaling Association (refer to {{bibref|3GPP2-A.S0024}}). AccessMode 2 (Hybrid) is not applicable to CDMA2000 FAPs. 0- Open,1-Closed, 2-Reserved, 3-Signaling Association.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.AccessMode";
+ }
+ leaf max-total-active-calls-allowed {
+ type uint16 {
+ range "1..1024";
+ }
+ config false;
+ description
+ "Total number of active calls allowed.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MaxTotalActiveCallsAllowed";
+ }
+ leaf access-control-list {
+ type string {
+ length "0..1024";
+ }
+ config false;
+ description
+ "{{list}} (maximum item length 15). Each entry is an IMSI.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.AccessControlList";
+ }
+ leaf max-member-detail-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.AccessMgmt.CDMA2000.MemberDetail.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MaxMemberDetailEntries";
+ }
+ leaf member-detail-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetailNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.";
+ }
+
+ grouping access-mgmt-cdma2000-member-detail-g {
+ description
+ "At most one enabled entry in this table can exist with a given value for IMSI and HRPDIdentifierValue. The IMSI field may be empty.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.Alias";
+ }
+ leaf imsi {
+ type string {
+ length "0..15";
+ }
+ description
+ "International Mobile Subscriber Identity of the UE.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.IMSI";
+ }
+ leaf hrpd-identifier-type {
+ type int64;
+ config false;
+ description
+ "Type of identifier used for the HRPD AT. 0-invalid 1-ESN 2-MEID 3-A12NAI. If IMSI in this record is valid, then this attribute is set to 0.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.HRPDIdentifierType";
+ }
+ leaf hrpd-identifier-value {
+ type string {
+ length "0..128";
+ }
+ config false;
+ description
+ "The value of this attribute depends on {{param|HRPDIdentifierType}}. ESN and MEID shall be defined as Hex.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.HRPDIdentifierValue";
+ }
+ leaf membership-expires {
+ type yang:date-and-time;
+ config false;
+ description
+ "The time that the current ACL membership expires.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.MembershipExpires";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}.";
+ }
+
+ grouping access-mgmt-cdma2000-local-ip-access-g {
+ description
+ "Local IP access support as defined in 3GPP2";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.";
+ }
+
+ grouping access-mgmt-cdma2000-local-ip-access-hrpd-g {
+ description
+ "Local IP access support as defined in 3GPP2";
+ leaf filter-type {
+ type uint8 {
+ range "0..3";
+ }
+ config false;
+ description
+ "Value of '0' indicates that the FAP shall allow only IP packets with destination address matching the local IP subnet on Local IP access interface. Value of '1' indicates that the FAP shall allow any IP packets with destination address matching either the local IP subnet or the subnets listed in Local IP egress filter parameter on Local IP access interface. Value of '2' indicates that the FAP shall allow any IP packets with destination addresses that do not match the Local IP egress filter parameter on Local IP access interface.Value of '3' indicates that the FAP shall allow any IP packets on the local IP address interface.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.FilterType";
+ }
+ leaf filter-in-use {
+ type string {
+ length "0..256";
+ }
+ description
+ "This parameter is set to the IPCP Vendor Specific Option which the FAP uses to send Local IP access packet filter on AN-PPP interface.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.FilterInUse";
+ }
+ leaf egress-filter-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilterNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.";
+ }
+
+ grouping access-mgmt-cdma2000-local-ip-access-hrpd-egress-filter-g {
+ description
+ "HRPD LIPA Egress Filter Table entries.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}.Alias";
+ }
+ leaf subnet {
+ type inet:ipv4-address;
+ description
+ "The IP subnet of the egress filter to be installed to the AT. The meaning of this field depends on the {{param|.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.FilterType}} field.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}.Subnet";
+ }
+ leaf subnet-mask {
+ type uint8 {
+ range "0..32";
+ }
+ description
+ "The length of the IP subnetmask associated with the IP subnet in the previous field.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}.SubnetMask";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}.";
+ }
+
+ grouping access-mgmt-legacy-g {
+ description
+ "This object contains configurable and observable attributes related to Access and Admission Control of the FAP, which are not not covered by 3GPP and 3GPP2 specifications.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.";
+ }
+
+ grouping access-mgmt-legacy-local-ip-access-g {
+ description
+ "Old Local IP access object, included on special request.";
+ leaf enable {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Enables/disables the Local IP Access (LIPA) functionality.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Enable";
+ }
+ leaf max-rules-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.MaxRulesEntries";
+ }
+ leaf rule-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.RuleNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.";
+ }
+
+ grouping access-mgmt-legacy-local-ip-access-rule-g {
+ description
+ "Policy for selecting traffic for local IP access. Originated traffic will be NAT'ed. The rule is bi-directional, i.e. return traffic is allowed. Rules do NOT affect traffic to/from the FAP itself (such as TR-069 or control). The rules are applied to the mobile station data traffic (PS-domain) via deep packet inspection or similar method.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the forwarding entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Alias";
+ }
+ leaf dest-ip-address {
+ type inet:ip-address;
+ description
+ "Destination IP Address. {{empty}} indicates no destination address is specified. An entry for which {{param}} and {{param|DestSubnetMask}} are both {{empty}} is a default route.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.DestIPAddress";
+ }
+ leaf dest-subnet-mask {
+ type inet:ip-address;
+ description
+ "Destination subnet mask (IPv4) or prefix (IPv6). {{empty}} indicates no destination subnet mask or prefix is specified. If a destination subnet mask or prefix is specified, {{param}} is ANDed with the destination address before comparing with {{param|DestIPAddress}}. Otherwise, the full destination address is used as-is. An entry for which {{param|DestIPAddress}} and {{param}} are both {{empty}} is a default route.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.DestSubnetMask";
+ }
+ leaf protocol {
+ type int64;
+ description
+ "IP Protocol Identifier. -1 matches any protocol.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Protocol";
+ }
+ leaf action {
+ type enumeration {
+ enum "tunnel" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Action - Tunnel";
+ }
+ enum "napt" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Action - NAPT";
+ }
+ }
+ config false;
+ description
+ "Action to be taken for traffic matching this rule.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Action";
+ }
+ leaf interface {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "Specifies the egress interface when {{param|Action}} is set to {{enum|NAPT|Action}}. {{reference}} layer-3 connection object. Example: InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.Interface";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}.";
+ }
+
+ grouping cell-config-g {
+ description
+ "This object contains parameters relating to configuring the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.";
+ }
+
+ grouping umts-g {
+ description
+ "This object contains parameters relating to configuring UMTS system specific information.";
+ leaf tunnel-instance {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "This is the reference to the IPsec tunnel instance used by the UMTS FAP. For all root data models, which use the tunnel definition provided in {{bibref|TR-262}} (InternetGatewayDevice:1 {{bibref|TR-098}} and Device:1 {{bibref|TR-181i1}}) the {{param}} MUST point to a row in the 'FAP.Tunnel.IKESA.{i}.' table, defined in {{bibref|TR-262}}. If the root data model used is Device:2 {{bibref|TR-181i2}} than the {{param}} MUST point to IPsec tunnel instance defined in {{bibref|TR-181i2}}. If the referenced object is deleted, the parameter value MUST be set to an empty string. In case of a multiple-radio-technology FAP product, each radio technology can have its own tunnels or share common tunnels. In the former case, {{param}} can contain a unique instance number. In the latter case, {{param}} under all radio technologies can have the same instance number.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.TunnelInstance";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.";
+ }
+
+ grouping umts-cn-g {
+ description
+ "This object contains parameters relating to configuring UMTS CN.";
+ leaf plmn-type {
+ type enumeration {
+ enum "gsm-map" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.PLMNType - GSM-MAP";
+ }
+ enum "ansi-41" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.PLMNType - ANSI-41";
+ }
+ }
+ config false;
+ description
+ "Type of Public Land Mobile Network (PLMN).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.PLMNType";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ config false;
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.PLMNID";
+ }
+ leaf-list equiv-plmnid {
+ type string {
+ length "0..6";
+ }
+ config false;
+ max-elements "64";
+ description
+ "{{list}} Each item is a PLMNID. PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of the PLMNID is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.EquivPLMNID";
+ }
+ leaf sac {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Service Area Code (SAC) {{bibref|3GPP-TS.23.003}}. The concatenation of PLMN ID (MCC+MNC), LAC, and SAC uniquely identifies the Service Area ID (SAI).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.SAC";
+ }
+ leaf broadcast-sac {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Service Area Code (SAC) for broadcast. The format of this parameter is the same with {{param|SAC}}, and it uniquely identifies the Service Area ID (SAI) for Earthquake and Tsunami Warning Services (ETWS) {{bibref|3GPP-TS.25.469|Section 9.1.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.BroadcastSAC";
+ }
+ leaf-list lacrac {
+ type string;
+ config false;
+ max-elements "256";
+ description
+ "{{list}} Each item is a LAC/RAC combination expressed in the following format: :<LAC or LACrange>':'<RAC or RACrange> Where LAC and RAC are single values, while LACrange and RACrange are inclusive and can be expressed in the following format: :<Start-value>\"..\"<End-value> Location Area Code (LAC) consists of up to 5 numerical characters. The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}. Routing Area Code (RAC) consists of up to 3 numerical characters. The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}. The FAP is to select one LAC and RAC from the combination(s) expressed in this parameter for use in {{param|LACInUse}} and {{param|RACInUse}} respectively. If a LAC occurs more than once in the list, this shall not increase the chance that it is selected over other LAC values in the list. The following are examples of the valid LACRAC combination formats: :\"64000:210\" ::(one list item with single value for LAC and RAC) :\"64000..64100:210, 64101:211\" ::(two list items, first item has a LAC range) :\"64000:210..214, 64001:215..219\" ::(two list items, both items have a RAC range for a specific LAC value) :\"64000..64100:210..214\" ::(one list item both have a LAC range and a RAC range)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.LACRAC";
+ }
+ leaf lac-in-use {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "The LAC being used by the FAP. Self-configuration for LAC is controlled by {{param|.Capabilities.UMTS.SelfConfig.LACRACURAConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.LACRACURASelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|LACRAC}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first LAC value in {{param|LACRAC}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.LACInUse";
+ }
+ leaf rac-in-use {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "The RAC being used by the FAP. Self-configuration for RAC is controlled by {{param|.Capabilities.UMTS.SelfConfig.LACRACURAConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.LACRACURASelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|LACRAC}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first RAC value in {{param|LACRAC}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.RACInUse";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.";
+ }
+
+ grouping umts-cn-cs-domain-g {
+ description
+ "This object contains parameters relating to configuring the CS domain of the UMTS CN.";
+ leaf t3212 {
+ type uint32 {
+ range "0..91800";
+ }
+ units "seconds";
+ config false;
+ description
+ "T3212 timeout value specified in {{units}} {{bibref|3GPP-TS.24.008|section 10.5.1.12.2}}. The values are implemented by steps of 360 {{units}}, which aligns with values in decihours in {{bibref|3GPP-TS.24.008}}. The value of 0 is used for infinite timeout value i.e. periodic updating shall not be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.CSDomain.T3212";
+ }
+ leaf imsi-attach-detach-enable {
+ type boolean;
+ config false;
+ description
+ "Indicates the UE behavior regarding IMSI attach/detach procedure to the CN {{bibref|3GPP-TS.24.008}}. If {{true}} UE SHALL apply IMSI attach and detach procedure If {{false}} UE SHALL NOT apply IMSI attach and detach procedure";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.CSDomain.IMSIAttachDetachEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.CSDomain.";
+ }
+
+ grouping umts-cn-ps-domain-g {
+ description
+ "This object contains parameters relating to configuring the PS domain of the UMTS CN.";
+ leaf network-mode-operation-combined {
+ type boolean;
+ config false;
+ description
+ "Network Mode of Operation of the CN. {{bibref|3GPP-TS.23.060}} {{bibref|3GPP-TS.24.008}} If {{true}} (Network Mode of Operation II) Combined procedures between CS and PS domain are not supported (i.e. Gs interface is not present). If {{false}} (Network Mode of Operation I) Combined procedures between CS and PS domain are supported (i.e. Gs interface is present).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.PSDomain.NetworkModeOperationCombined";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.CN.PSDomain.";
+ }
+
+ grouping umts-ran-g {
+ description
+ "This object contains parameters relating to the RAN-level configuration.";
+ leaf-list ura-list {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ min-elements 1;
+ max-elements "50";
+ description
+ "{{list}} Each item is a URA (UTRAN Registration Area) to which the FAP belongs. The order of the URA values has no significance. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.URAList";
+ }
+ leaf ura-in-use {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "The URA being used by the FAP. Self-configuration for URA is controlled by {{param|.Capabilities.UMTS.SelfConfig.LACRACURAConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.LACRACURASelfConfigEnable}} from an enabled perspective. If the FAP's self-configuration capability for URA is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|URAList}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first URA value in {{param|URAList}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.URAInUse";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "RNC-ID allocated to the FAP. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RNCID";
+ }
+ leaf cell-id {
+ type uint32 {
+ range "0..268435455";
+ }
+ config false;
+ description
+ "Cell Identity. {{bibref|3GPP-TS.25.401|Section 6.1.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellID";
+ }
+ leaf t-rat-c {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Guard period in {{units}} before sending a \"RANAP:RESET ACKNOWLEDGE\" message towards the Femto GW. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TRatC";
+ }
+ leaf t-raf-c {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Maximum amount of time in {{units}} that the FAP SHOULD wait for receiving a \"RANAP:RESET ACKNOWLEDGE\" message from the Femto GW after sending a Reset to the Femto GW. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TRafC";
+ }
+ leaf n-raf-c {
+ type uint64 {
+ range "1..max";
+ }
+ config false;
+ description
+ "Maximum number for RESET procedure that can be repeated in FAP. {{bibref|3GPP-TS.25.413|Section 8.26.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NRafC";
+ }
+ leaf tig-or {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Amount of time in {{units}} used to determine when the additional level of traffic reduction in CN overload SHOULD take place. While this timer is running all OVERLOAD messages or signalling pointing to congested information received by the FAP are ignored. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TigOR";
+ }
+ leaf tin-tr {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Amount of time in {{units}} used to determine when the CN overload can be considered cleared. While this timer is running, the FAP is not allowed to increase traffic. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TinTR";
+ }
+ leaf t-data-fwd {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Maximum amount of time in {{units}} for Data Forwarding at FAP. Timer is started when a \"RANAP:SRNS Data Forward Command\" message (or a \"RANAP:Relocation Command\" message) is received. At timer expiry the \"SRNS Data Forwarding\" procedure is completed. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TDataFwd";
+ }
+ leaf t-reloc-prep {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Maximum amount of time in {{units}} for the Relocation Preparation procedure. Timer is started when a \"RANAP:Relocation Required\" message is sent. Timer is stopped when a \"RANAP:Relocation Command\" or a \"RANAP:Relocation Preparation Failure\" message is received. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TRelocPrep";
+ }
+ leaf t-reloc-overall {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Maximum amount of time in {{units}} for protection of the overall Relocation procedure. Timer is started when a \"RANAP:Relocation Command\" message is received. Timer is stopped when a \"RANAP:Iu Release Command\" is received or the relocation procedure is cancelled. {{bibref|3GPP-TS.25.413|Section 9.5}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.TRelocOverall";
+ }
+ leaf hnbid-realm {
+ type string {
+ length "0..182";
+ }
+ config false;
+ description
+ "The \"realm\" portion of the HNB-ID where HNB-ID is defined in {{bibref|3GPP-TS.25.469}} and is shown as follows: 0<IMSI>@<realm> Or 1<OUI>-<SerialNumber>@<realm> The other identifiers before \"@\" are device dependent values. Both <OUI> and <SerialNumber> are defined in {{bibref|TR-069a2|Table 36}}. <IMSI> is obtained from the USIM if it is equipped in the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.HNBIDRealm";
+ }
+ leaf hs-flag {
+ type boolean;
+ config false;
+ description
+ "Enables/disables the HSDPA function in the FAP. If {{true}} HSDPA is enabled (this is equivalent to a \"1\" in {{bibref|3GPP-TS.32.642|Section 6.3.9}}) If {{false}} HSDPA is disabled (this is equivalent to a \"0\" in {{bibref|3GPP-TS.32.642|Section 6.3.9}})";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.HSFlag";
+ }
+ leaf hs-enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables HSDPA in the cell. If {{true}} HSDPA is enabled (this is equivalent to a \"1\" in {{bibref|3GPP-TS.32.642|Section 6.3.9}}) If {{false}} HSDPA is not enabled (this is equivalent to a \"0\" in {{bibref|3GPP-TS.32.642|Section 6.3.9}}) If {{param|HSFlag}} is {{false}} then this value MUST be {{false}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.HSEnable";
+ }
+ leaf num-of-hspdsc-hs {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "The number of codes at the defined spreading factor (SF=16), within the complete code tree. {{bibref|3GPP-TS.32.642|Section 6.3.9}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NumOfHSPDSCHs";
+ }
+ leaf num-of-hsscc-hs {
+ type uint64;
+ config false;
+ description
+ "The number of HS-SCCHs for one cell. {{bibref|3GPP-TS.32.642|Section 6.3.9}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NumOfHSSCCHs";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.";
+ }
+
+ grouping umts-ran-csg-g {
+ description
+ "This object contains parameters relating to the Closed Subscriber Group (CSG).";
+ leaf csg-indicator {
+ type boolean;
+ description
+ "The CSG-indicator Information Element (IE) in the Master Information Block reflects the access mode of the CSG cell. It is hence dependent on the value of {{param|.AccessMgmt.UMTS.AccessMode}}. If {{true}} the CSG-indicator IE is present, reflecting access to the CSG cell is closed. If {{false}} the CSG-indicator IE is absent, reflecting access to the CSG cell is not closed. {{bibref|3GPP-TS.25.331|Section 10.2.48.8.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGIndicator";
+ }
+ leaf-list uarfcndl-list {
+ type uint16 {
+ range "0..16383";
+ }
+ config false;
+ max-elements "128";
+ description
+ "{{list}} Each item is a UTRA Absolute Radio Frequency Channel Number (UARFCN) in the DL direction dedicated to the CSG cells. {{param}} is broadcast in SIB 11bis {{bibref|3GPP-TS.25.331|Section 10.2.48.8.14a}}. The corresponding UTRA Absolute Radio Frequency Channel Number (UARFCN) in the UL direction is derived based on the fixed offset applicable for the frequency band.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.UARFCNDLList";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.";
+ }
+
+ grouping umts-ran-csg-csgpsc-split-info-g {
+ description
+ "This object contains parameters relating to the Primary Scrambling Code (PSC) split information for the CSG. Defined in SIB3/11bis {{bibref|3GPP-TS.25.331|Section 10.3.2.8 and 10.3.2.9}}.";
+ leaf start-psc-range1-coefficient {
+ type uint8 {
+ range "0..63";
+ }
+ config false;
+ description
+ "The value of this Information Element (IE) multiplied by 8 specifies the start PSC value of the first PSC range as specified in {{bibref|3GPP-TS.25.331|Section 8.6.2.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.StartPSCRange1Coefficient";
+ }
+ leaf number-of-ps-cs {
+ type enumeration {
+ enum "5" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 5";
+ }
+ enum "10" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 10";
+ }
+ enum "15" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 15";
+ }
+ enum "20" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 20";
+ }
+ enum "30" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 30";
+ }
+ enum "40" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 40";
+ }
+ enum "50" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 50";
+ }
+ enum "64" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 64";
+ }
+ enum "80" {
+ value 9;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 80";
+ }
+ enum "120" {
+ value 10;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 120";
+ }
+ enum "160" {
+ value 11;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 160";
+ }
+ enum "256" {
+ value 12;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - 256";
+ }
+ enum "alltherest" {
+ value 13;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - alltherest";
+ }
+ enum "spare3" {
+ value 14;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - spare3";
+ }
+ enum "spare2" {
+ value 15;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - spare2";
+ }
+ enum "spare1" {
+ value 16;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs - spare1";
+ }
+ }
+ config false;
+ description
+ "This Information Element (IE) specifies the number of PSCs reserved for CSG cells in each PSC range.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.NumberOfPSCs";
+ }
+ leaf psc-range2-offset {
+ type uint8 {
+ range "0..63";
+ }
+ config false;
+ description
+ "If this Information Element (IE) is included, the UE shall calculate the second PSC range as specified in {{bibref|3GPP-TS.25.331|Section 8.6.2.4}}. If this Information Element (IE) is not included, the UE shall consider the second PSC range to be not present.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.PSCRange2Offset";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CSG.CSGPSCSplitInfo.";
+ }
+
+ grouping umts-ran-cell-selection-g {
+ description
+ "This object contains parameters related to cell selection and reselection.";
+ leaf quality-measure-cpich {
+ type enumeration {
+ enum "ec/no" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QualityMeasureCPICH - Ec/No";
+ }
+ enum "rscp" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QualityMeasureCPICH - RSCP";
+ }
+ }
+ config false;
+ description
+ "Which mechanism to use when doing CPICH quality measurements. {{bibref|3GPP-TS.25.331|Section 10.3.7.47}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QualityMeasureCPICH";
+ }
+ leaf qqual-min {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Minimum required quality measure, specified in {{units}}. {{bibref|3GPP-TS.25.331|Section 10.3.2.3 and Section 10.3.2.4}} This value is only meaningful if {{param|QualityMeasureCPICH}} has the value {{enum|Ec/No|QualityMeasureCPICH}} and it MUST otherwise be ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QqualMin";
+ }
+ leaf qqual-min-offset {
+ type uint8 {
+ range "1..16";
+ }
+ units "dB";
+ default "1";
+ config false;
+ description
+ "Offset for {{param|QqualMin}} specified in {{units}}. {{bibref|3GPP-TS.25.331|Section 10.3.2.3}} This value is only meaningful if {{param|QualityMeasureCPICH}} has the value {{enum|Ec/No|QualityMeasureCPICH}} and it MUST otherwise be ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QqualMinOffset";
+ }
+ leaf q-rx-lev-min {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Minimum required RX level in the cell, specified in {{units}}. {{bibref|3GPP-TS.25.331|Section 10.3.2.3}} Only odd values are valid, use of an even value MUST be rejected by the CPE. This value is only meaningful if {{param|QualityMeasureCPICH}} has the value {{enum|RSCP|QualityMeasureCPICH}} and it MUST otherwise be ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QRxLevMin";
+ }
+ leaf delta-q-rx-lev-min {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Delta for the minimum required RX level in the cell, specified in {{units}}. {{bibref|3GPP-TS.25.331|Section 10.3.2.3 and Section 10.3.2.4}} The actual value of {{param|QRxLevMin}} = {{param|QRxLevMin}} + {{param}} This value is only meaningful if {{param|QualityMeasureCPICH}} has the value {{enum|RSCP|QualityMeasureCPICH}} and it MUST otherwise be ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.DeltaQRxLevMin";
+ }
+ leaf q-rx-lev-min-offset {
+ type uint8 {
+ range "2 | 4 | 6 | 8 | 10 | 12 | 14 | 16";
+ }
+ units "dB";
+ default "2";
+ config false;
+ description
+ "Offset for {{param|QRxLevMin}}, specified in {{units}}. {{bibref|3GPP-TS.25.331|Section 10.3.2.3}} This value is only meaningful if {{param|QualityMeasureCPICH}} has the value {{enum|RSCP|QualityMeasureCPICH}} and it MUST otherwise be ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QRxLevMinOffset";
+ }
+ leaf q-hyst1s {
+ type uint8 {
+ range "0..40";
+ }
+ config false;
+ description
+ "GSM and FDD Cell reselection hysteresis 1. {{bibref|3GPP-TS.25.331|Section 10.3.2.3}} Only even values are valid, use of an odd value MUST be rejected by the CPE.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QHyst1s";
+ }
+ leaf q-hyst2s {
+ type uint8 {
+ range "0..40";
+ }
+ config false;
+ description
+ "FDD Cell reselection hysteresis 2. {{bibref|3GPP-TS.25.331|Section 10.3.2.3}} Only even values are valid, use of an odd value MUST be rejected by the CPE. This value is only meaningful if {{param|QualityMeasureCPICH}} has the value {{enum|Ec/No|QualityMeasureCPICH}} and it MUST otherwise be ignored. By default when {{param|QHyst1s}} is set and {{param}} is not, then the value for {{param}} SHOULD match the value of {{param|QHyst1s}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QHyst2s";
+ }
+ leaf t-reselections {
+ type uint8 {
+ range "0..31";
+ }
+ units "seconds";
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. A UE triggers the reselection of a new cell if the cell reselection criteria are fulfilled during the time interval in {{units}}. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TReselections";
+ }
+ leaf s-intrasearch {
+ type int64;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the threshold for intra-frequency measurements, and for the HCS measurement rules. Only even values are valid, use of an odd value MUST be rejected by the CPE. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.SIntrasearch";
+ }
+ leaf s-intersearch {
+ type int64;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the threshold for inter-frequency measurements, and for the HCS measurement rules. Only even values are valid, use of an odd value MUST be rejected by the CPE. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.SIntersearch";
+ }
+ leaf s-search-hcs {
+ type int64;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the threshold for intrafrequency and interfrequency measurement rules in HCS. Below this limit in the serving cell, the UE initiates measurements of all intrafrequency and interfrequency neighbouring cells of the serving cell. Only odd values are valid, use of an even value MUST be rejected by the CPE. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.SSearchHCS";
+ }
+ leaf s-search-rat {
+ type int64;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the RAT (GSM) specific threshold for inter-RAT measurement rules. Only even values are valid, use of an odd value MUST be rejected by the CPE. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.SSearchRAT";
+ }
+ leaf shcsrat {
+ type int64;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the RAT (GSM) specific threshold for inter-RAT measurement rules in HCS. Only odd values are valid, use of an even value MUST be rejected by the CPE. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.SHCSRAT";
+ }
+ leaf s-limit-search-rat {
+ type int64;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the threshold for skipping inter-RAT measurement rules in HCS. Above this RAT (GSM) specific threshold in the serving UTRA cell, the UE does not need to perform any inter-RAT measurements. Only even values are valid, use of an odd value MUST be rejected by the CPE. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.SLimitSearchRAT";
+ }
+ leaf non-hcstcr-max {
+ type enumeration {
+ enum "not used" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax - not used";
+ }
+ enum "30" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax - 30";
+ }
+ enum "60" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax - 60";
+ }
+ enum "120" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax - 120";
+ }
+ enum "180" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax - 180";
+ }
+ enum "240" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax - 240";
+ }
+ }
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the duration in seconds for evaluating the allowed amount of cell reselections. If the number of cell reselections during the time period defined by {{param}} exceeds {{param|NonHCSNCR}}, high mobility has been detected. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMax";
+ }
+ leaf non-hcsncr {
+ type uint8 {
+ range "1..16";
+ }
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the maximum number of cell reselections. If the number of cell reselections during the {{param|NonHCSTCRMax}} time period exceeds the value of {{param}}, high mobility has been detected. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSNCR";
+ }
+ leaf non-hcstcr-max-hyst {
+ type enumeration {
+ enum "not used" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - not used";
+ }
+ enum "10" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 10";
+ }
+ enum "20" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 20";
+ }
+ enum "30" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 30";
+ }
+ enum "40" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 40";
+ }
+ enum "50" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 50";
+ }
+ enum "60" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 60";
+ }
+ enum "70" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst - 70";
+ }
+ }
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the cell reselection hysteresis for reverting from UE high-mobility measurements. The additional time period in seconds before UE reverts to low-mobility measurements. When the number of cell reselections during the time period defined by {{param|TCRMax}} no longer exceeds {{param|NCR}}, UE continues measurements during the time period defined by {{param|TCRMaxHyst}}. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.2.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NonHCSTCRMaxHyst";
+ }
+ leaf qhcs {
+ type uint8 {
+ range "0..99";
+ }
+ default "0";
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the quality threshold levels for applying prioritised hierarchical cell reselection. {{bibref|3GPP-TS.25.331|Section 10.3.7.12 and Section 10.3.7.54a}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.QHCS";
+ }
+ leaf use-of-hcs {
+ type boolean;
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Indicate whether HCS is used in this cell or not. {{bibref|3GPP-TS.25.331|Section 10.3.7.47}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.UseOfHCS";
+ }
+ leaf hcs-prio {
+ type uint8 {
+ range "0..7";
+ }
+ default "0";
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the HCS priority of this cell. {{bibref|3GPP-TS.25.331|Section 10.3.7.12}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.HCSPrio";
+ }
+ leaf tcr-max {
+ type enumeration {
+ enum "not used" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax - not used";
+ }
+ enum "30" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax - 30";
+ }
+ enum "60" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax - 60";
+ }
+ enum "120" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax - 120";
+ }
+ enum "180" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax - 180";
+ }
+ enum "240" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax - 240";
+ }
+ }
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the duration in seconds for evaluating the allowed amount of cell reselections. If the number of cell reselections during the time period defined by {{param}} exceeds {{param|NCR}}, high mobility has been detected. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.7.12}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMax";
+ }
+ leaf ncr {
+ type uint8 {
+ range "1..16";
+ }
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the maximum number of cell reselections. If the number of cell reselections during the {{param|TCRMax}} time period exceeds the value of {{param}}, high mobility has been detected. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.7.12}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.NCR";
+ }
+ leaf tcr-max-hyst {
+ type enumeration {
+ enum "not used" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - not used";
+ }
+ enum "10" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 10";
+ }
+ enum "20" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 20";
+ }
+ enum "30" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 30";
+ }
+ enum "40" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 40";
+ }
+ enum "50" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 50";
+ }
+ enum "60" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 60";
+ }
+ enum "70" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst - 70";
+ }
+ }
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the cell reselection hysteresis for reverting from UE high-mobility measurements. The additional time period in seconds before UE reverts to low-mobility measurements. When the number of cell reselections during the time period defined by {{param|TCRMax}} no longer exceeds {{param|NCR}}, UE continues measurements during the time period defined by {{param}}. Parameter defined in SIB3 {{bibref|3GPP-TS.25.331|Section 10.3.7.12}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.TCRMaxHyst";
+ }
+ leaf ue-tx-pwr-max-rach {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "A member of the set of parameters used for cell reselection functionality. Defines the maximum transmit power level, specified in {{units}}, that an UE MAY use when accessing the cell on RACH. Used to calculate Pcompensation, which is: max(UE_TXPWR_MAX_RACH - P_MAX, 0), where UE_TXPWR_MAX_RACH is {{param}} and P_MAX is the max transmit power for a UE. {{bibref|3GPP-TS.25.331|Section 10.3.2.3}} {{bibref|3GPP-TS.25.304|Section 5.2.3}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.UETxPwrMaxRACH";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellSelection.";
+ }
+
+ grouping umts-ran-rrc-timers-g {
+ description
+ "This object contains parameters related to miscellaneous RRC timers and constants.";
+ leaf t300 {
+ type uint16 {
+ range "100..8000";
+ }
+ units "milliseconds";
+ default "1000";
+ config false;
+ description
+ "Timer measured in {{units}}. Only the following values are considered valid: :100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, and 8000 Any value other than those and the CPE MUST reject the request. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T300";
+ }
+ leaf t301 {
+ type uint16 {
+ range "100..8000";
+ }
+ units "milliseconds";
+ default "2000";
+ config false;
+ description
+ "Timer measured in {{units}}. Only the following values are considered valid: :100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, and 8000 Any value other than those and the CPE MUST reject the request. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T301";
+ }
+ leaf t302 {
+ type uint16 {
+ range "100..8000";
+ }
+ units "milliseconds";
+ default "4000";
+ config false;
+ description
+ "Timer measured in {{units}}. Only the following values are considered valid: :100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, and 8000 Any value other than those and the CPE MUST reject the request. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T302";
+ }
+ leaf t304 {
+ type uint16 {
+ range "100 | 200 | 400 | 1000 | 2000";
+ }
+ units "milliseconds";
+ default "2000";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T304";
+ }
+ leaf t305 {
+ type int64;
+ units "minutes";
+ default "30";
+ config false;
+ description
+ "Timer measured in {{units}}. -1 indicates an unbounded timer in which there is no update. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T305";
+ }
+ leaf t307 {
+ type uint8 {
+ range "5 | 10 | 15 | 20 | 30 | 40 | 50";
+ }
+ units "seconds";
+ default "30";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T307";
+ }
+ leaf t308 {
+ type uint16 {
+ range "40 | 80 | 160 | 320";
+ }
+ units "milliseconds";
+ default "160";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T308";
+ }
+ leaf t309 {
+ type uint8 {
+ range "1..8";
+ }
+ units "seconds";
+ default "5";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T309";
+ }
+ leaf t310 {
+ type uint16 {
+ range "40 | 80 | 120 | 160 | 200 | 240 | 280 | 320";
+ }
+ units "milliseconds";
+ default "160";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T310";
+ }
+ leaf t311 {
+ type uint16 {
+ range "250 | 500 | 750 | 1000 | 1250 | 1500 | 1750 | 2000";
+ }
+ units "milliseconds";
+ default "2000";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T311";
+ }
+ leaf t312 {
+ type uint8 {
+ range "0..15";
+ }
+ units "seconds";
+ default "1";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T312";
+ }
+ leaf t313 {
+ type uint8 {
+ range "0..15";
+ }
+ units "seconds";
+ default "3";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T313";
+ }
+ leaf t314 {
+ type uint8 {
+ range "0 | 2 | 4 | 6 | 8 | 12 | 16 | 20";
+ }
+ units "seconds";
+ default "12";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T314";
+ }
+ leaf t315 {
+ type uint16 {
+ range "0 | 10 | 30 | 60 | 180 | 600 | 1200 | 1800";
+ }
+ units "seconds";
+ default "180";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T315";
+ }
+ leaf t316 {
+ type int64;
+ units "seconds";
+ default "30";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}. -1 indicates an unbounded timer in which there is no update.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T316";
+ }
+ leaf t317 {
+ type uint16 {
+ range "0 | 10 | 30 | 60 | 180 | 600 | 1200 | 1800";
+ }
+ units "seconds";
+ config false;
+ description
+ "Timer measured in {{units}}. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.T317";
+ }
+ leaf n300 {
+ type uint8 {
+ range "0..7";
+ }
+ default "3";
+ config false;
+ description
+ "Counter. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N300";
+ }
+ leaf n301 {
+ type uint8 {
+ range "0..7";
+ }
+ default "2";
+ config false;
+ description
+ "Counter. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N301";
+ }
+ leaf n302 {
+ type uint8 {
+ range "0..7";
+ }
+ default "3";
+ config false;
+ description
+ "Counter. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N302";
+ }
+ leaf n304 {
+ type uint8 {
+ range "0..7";
+ }
+ default "2";
+ config false;
+ description
+ "Counter. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N304";
+ }
+ leaf n310 {
+ type uint8 {
+ range "0..7";
+ }
+ default "4";
+ config false;
+ description
+ "Counter. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N310";
+ }
+ leaf n312 {
+ type uint16 {
+ range "1..1000";
+ }
+ default "1";
+ config false;
+ description
+ "Counter. Only the following values are considered valid: 1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, and 1000. Any value other than those and the CPE MUST reject the request. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.44}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N312";
+ }
+ leaf n313 {
+ type uint8 {
+ range "1 | 2 | 4 | 10 | 20 | 50 | 100 | 200";
+ }
+ default "20";
+ config false;
+ description
+ "Counter. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N313";
+ }
+ leaf n315 {
+ type uint16 {
+ range "1..1000";
+ }
+ default "1";
+ config false;
+ description
+ "Counter. Only the following values are considered valid: :1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, and 1000. Any value other than those and the CPE MUST reject the request. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 13.1 and Section 10.3.3.43}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.N315";
+ }
+ leaf wait-time {
+ type uint8 {
+ range "0..15";
+ }
+ units "seconds";
+ config false;
+ description
+ "Time period the UE has to wait before repeating the rejected procedure. This is an IE used when sending RRC connection reject, redirecting the requesting UE to another frequency. 0 indicates that repetition is not allowed. {{bibref|3GPP-TS.25.331|Section 10.3.3.50}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.WaitTime";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers.";
+ }
+
+ grouping umts-ran-drx-g {
+ description
+ "This object contains parameters related to DRX parameters.";
+ leaf drx-cycle-length-coefficient-cs {
+ type uint8 {
+ range "6..9";
+ }
+ config false;
+ description
+ "Defines the DRX cycle length coefficient for CS domain to optimize paging in idle mode. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 10.3.3.6}}. {{param}} refers to 'k' in the formula as specified in {{bibref|3GPP-TS.25.304}}, Discontinuous reception. Used by the CN CS domain to count paging occasions for discontinuous reception in Idle Mode. The duration of the DRX cycle is 2 <power> k frames, where 'k' is the used DRX cycle length coefficient for CN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.DRX.DRXCycleLengthCoefficientCS";
+ }
+ leaf drx-cycle-length-coefficient-ps {
+ type uint8 {
+ range "6..9";
+ }
+ config false;
+ description
+ "Defines the DRX cycle length coefficient for PS domain to optimize paging in idle mode. Defined in SIB1 {{bibref|3GPP-TS.25.331|Section 10.3.3.6}}. {{param}} refers to 'k' in the formula as specified in {{bibref|3GPP-TS.25.304}}, Discontinuous reception. Used by the CN PS domain to count paging occasions for discontinuous reception in Idle Mode. The duration of the DRX cycle is 2 <power> k frames, where 'k' is the used DRX cycle length coefficient for CN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.DRX.DRXCycleLengthCoefficientPS";
+ }
+ leaf utrandrx-cycle-length-coefficient {
+ type uint8 {
+ range "3..9";
+ }
+ config false;
+ description
+ "Defines the DRX cycle length used by UTRAN to count paging occasions for discontinuous reception in Connected Mode. The duration of the DRX cycle is 2 <power> k frames, where 'k' is the used DRX cycle length coefficient for UTRAN. {{param}} SHOULD be used by the UTRAN/FAP for UEs in Cell_PCH/Cell_FACH state. {{bibref|3GPP-TS.25.331|Section 10.3.3.49}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.DRX.UTRANDRXCycleLengthCoefficient";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.DRX.";
+ }
+
+ grouping umts-ran-power-control-g {
+ description
+ "This object contains parameters related to power control and RACH.";
+ leaf constant-value {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Used by the UE to calculate the initial output power, specified in {{units}}, on PRACH according to the open loop power control procedure. Parameter in SIB5. {{bibref|3GPP-TS.25.331|Section 10.3.6.11}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.ConstantValue";
+ }
+ leaf power-ramp-step-up {
+ type uint8 {
+ range "1..8";
+ }
+ units "dB";
+ config false;
+ description
+ "Used for the Uplink Common Channel. Defines the Power ramp setup, specified in {{units}}, on PRACH preamble when no acquisition indicator (AI) is detected by the UE. Parameter in SIB5. {{bibref|3GPP-TS.25.331|Section 10.3.6.54}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.PowerRampStepUp";
+ }
+ leaf preamble-retrans-max {
+ type uint8 {
+ range "1..64";
+ }
+ config false;
+ description
+ "Used for the Uplink Common Channel. Defines the maximum number of preambles allowed in one preamble ramping cycle. PRACH Preamble Retrans Max is part of \"PRACH power offset\" which is part of \"PRACH system information list\". Parameter in SIB5. {{bibref|3GPP-TS.25.331|Section 10.3.6.54}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.PreambleRetransMax";
+ }
+ leaf persistence-scale-factor {
+ type uint8 {
+ range "2..9";
+ }
+ config false;
+ description
+ "Persistence Scaling Factor for overload control. Parameter in SIB5. The value is the scaling factor multiplied by 10, e.g. 2 is a scaling factor of 0.2";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.PersistenceScaleFactor";
+ }
+ leaf m-max {
+ type uint8 {
+ range "1..32";
+ }
+ config false;
+ description
+ "Maximum number of RACH preamble cycles. Defines how many times the PRACH preamble ramping procedure can be repeated before UE MAC reports a failure on RACH transmission to higher layers. Maximum number of RACH preamble cycles is part of \"RACH transmission parameters\" which is part of \"PRACH system information list\" which is part of SIB5. {{bibref|3GPP-TS.25.331|Section 10.3.6.67}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.MMax";
+ }
+ leaf nb01-min {
+ type uint8 {
+ range "0..50";
+ }
+ config false;
+ description
+ "RACH random back-off lower bound. {{param}} is the lower bound of the waiting time in 10 millisecond increments (i.e. 1 corresponds to 10 ms and 50 corresponds to 500 ms). {{param}} is part of \"RACH transmission parameters\" which is part of \"PRACH system information list\" which is part of SIB5. {{bibref|3GPP-TS.25.331|Section 10.3.6.67}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.NB01Min";
+ }
+ leaf nb01-max {
+ type uint8 {
+ range "0..50";
+ }
+ config false;
+ description
+ "RACH random back-off upper bound. {{param}} is the Upper bound of the waiting time in 10 millisecond increments (i.e. 1 corresponds to 10 ms and 50 corresponds to 500 ms). {{param}} is part of \"RACH transmission parameters\" which is part of \"PRACH system information list\" which is part of SIB5. {{bibref|3GPP-TS.25.331|Section 10.3.6.67}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.NB01Max";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.PowerControl.";
+ }
+
+ grouping umts-ran-cell-restriction-g {
+ description
+ "This object contains parameters related to cell access restriction.";
+ leaf cell-barred {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the FAP is barred from service or not. {{bibref|3GPP-TS.25.331|Section 10.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.CellBarred";
+ }
+ leaf intra-freq-cell-reselection-indicator {
+ type boolean;
+ config false;
+ description
+ "When {{param|CellBarred}} is {{true}}, this indicates whether the intra-frequency cell re-selection is allowed or not. {{param}} has no meaning if {{param|CellBarred}} is {{false}} and MUST be ignored in such cases. {{true}} means that intra-frequency cell re-selection is allowed. {{false}} means that intra-frequency cell re-selection is not allowed. {{bibref|3GPP-TS.25.331|Section 10.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.IntraFreqCellReselectionIndicator";
+ }
+ leaf t-barred {
+ type uint16 {
+ range "10 | 20 | 40 | 80 | 160 | 320 | 640 | 1280";
+ }
+ units "seconds";
+ config false;
+ description
+ "The time period in {{units}} during which the UE is barred from accessing the FAP. {{bibref|3GPP-TS.25.331|Section 10.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.TBarred";
+ }
+ leaf-list access-class-barred-list-cs {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "{{list}} Each entry is an Access Class that is barred from CS service. The order of the list has no significance. {{bibref|3GPP-TS.25.331|Section 10.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.AccessClassBarredListCS";
+ }
+ leaf-list access-class-barred-list-ps {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "{{list}} Each entry is an Access Class that is barred from PS service. The order of the list has no significance. {{bibref|3GPP-TS.25.331|Section 10.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.AccessClassBarredListPS";
+ }
+ leaf cell-reserved-for-operator-use {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the FAP is reserved for operator use or not. {{bibref|3GPP-TS.25.331|Section 10.3.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.CellReservedForOperatorUse";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.CellRestriction.";
+ }
+
+ grouping umts-ran-intra-freq-meas-g {
+ description
+ "This object contains parameters relating to the intra-freq HO control parameters.";
+ leaf measurement-quantity {
+ type enumeration {
+ enum "cpich ec/no" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.MeasurementQuantity - CPICH Ec/No";
+ }
+ enum "cpich rscp" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.MeasurementQuantity - CPICH RSCP";
+ }
+ enum "pathloss" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.MeasurementQuantity - Pathloss";
+ }
+ }
+ config false;
+ description
+ "Defines the measurement quantity for intra-freq HO measurement when the UE is in Cell-DCH state. Enumeration of: {{enum}} {{bibref|3GPP-TS.25.331|Section 10.3.7.38}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.MeasurementQuantity";
+ }
+ leaf filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the equivalent time constant of the low pass filter applied to the CPICH quality measurements, or {{enum|CPICH Ec/No|MeasurementQuantity}}. {{bibref|3GPP-TS.25.331|Section 8.6.7.2 and Section 10.3.7.9}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.FilterCoefficient";
+ }
+ leaf-list intra-frequency-event-identity {
+ type string;
+ config false;
+ max-elements "32";
+ description
+ "{{list}} Each entry is an Event ID from the list of: 1a, 1b, 1c, 1d, 1e, 1f, 1g, 1h, 1i Defines the identity of the event used to trigger UE reporting (in case of event-triggered reporting). {{bibref|3GPP-TS.25.331|Section 10.3.7.34}} Since the FAP can determine this on its own, it might not be necessary to configure it.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.IntraFrequencyEventIdentity";
+ }
+ leaf-list triggering-condition2-event1a {
+ type enumeration {
+ enum "active" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1a - Active";
+ }
+ enum "monitored" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1a - Monitored";
+ }
+ enum "active and monitored" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1a - Active and Monitored";
+ }
+ enum "detected" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1a - Detected";
+ }
+ enum "detected and monitored" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1a - Detected and Monitored";
+ }
+ }
+ config false;
+ description
+ "{{list}} Indicates which cells can trigger Event 1a. {{enum}} {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1a";
+ }
+ leaf-list triggering-condition1-event1b {
+ type enumeration {
+ enum "active" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1b - Active";
+ }
+ enum "monitored" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1b - Monitored";
+ }
+ enum "active and monitored" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1b - Active and Monitored";
+ }
+ }
+ config false;
+ description
+ "{{list}} Indicates which cells can trigger Event 1b. {{enum}} {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1b";
+ }
+ leaf-list triggering-condition2-event1e {
+ type enumeration {
+ enum "active" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1e - Active";
+ }
+ enum "monitored" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1e - Monitored";
+ }
+ enum "active and monitored" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1e - Active and Monitored";
+ }
+ enum "detected" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1e - Detected";
+ }
+ enum "detected and monitored" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1e - Detected and Monitored";
+ }
+ }
+ config false;
+ description
+ "{{list}} Indicates which cells can trigger Event 1e. {{enum}} {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition2Event1e";
+ }
+ leaf-list triggering-condition1-event1f {
+ type enumeration {
+ enum "active" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1f - Active";
+ }
+ enum "monitored" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1f - Monitored";
+ }
+ enum "active and monitored" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1f - Active and Monitored";
+ }
+ }
+ config false;
+ description
+ "{{list}} Indicates which cells can trigger Event 1f. {{enum}} {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TriggeringCondition1Event1f";
+ }
+ leaf reporting-range-event1a {
+ type uint8 {
+ range "0..29";
+ }
+ units "dB";
+ config false;
+ description
+ "Defines a constant in the inequality criterion that needs to be satisfied for an Event 1a to occur. Actual values of the range are 0.0 to 14.5 {{units}} in steps of 0.5 {{units}}. The value of {{param}} divided by 2 yields the actual value of the range. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportingRangeEvent1a";
+ }
+ leaf reporting-range-event1b {
+ type uint8 {
+ range "0..29";
+ }
+ units "dB";
+ config false;
+ description
+ "Defines a constant in the inequality criterion that needs to be satisfied for an Event 1b to occur. Actual values of the range are 0.0 to 14.5 {{units}} in steps of 0.5 {{units}}. The value of {{param}} divided by 2 yields the actual value of the range. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportingRangeEvent1b";
+ }
+ leaf weighting-factor-event1a {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.WeightingFactorEvent1a";
+ }
+ leaf weighting-factor-event1b {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.WeightingFactorEvent1b";
+ }
+ leaf report-deactivation-threshold-event1a {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Defines the maximum number of cells allowed in the \"active cell set\" for Event 1a to occur. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportDeactivationThresholdEvent1a";
+ }
+ leaf reporting-amount-event1a {
+ type int64;
+ config false;
+ description
+ "Defines the maximum number of MEASUREMENT REPORT messages sent by the UE in case of periodic reporting triggered by an Event 1a The value -1 is used to represent an unbounded maximum. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportingAmountEvent1a";
+ }
+ leaf reporting-amount-event1c {
+ type int64;
+ config false;
+ description
+ "Defines the maximum number of MEASUREMENT REPORT messages sent by the UE in case of periodic reporting triggered by an Event 1c The value -1 is used to represent an unbounded maximum. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportingAmountEvent1c";
+ }
+ leaf reporting-interval-event1a {
+ type uint16 {
+ range "0 | 250 | 500 | 1000 | 2000 | 4000 | 8000 | 16000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the transmission period in {{units}} of MEASUREMENT REPORT messages sent by the UE in case of periodic reporting triggered by an Event 1a. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportingIntervalEvent1a";
+ }
+ leaf reporting-interval-event1c {
+ type uint16 {
+ range "0 | 250 | 500 | 1000 | 2000 | 4000 | 8000 | 16000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the transmission period in {{units}} of MEASUREMENT REPORT messages sent by the UE in case of periodic reporting triggered by an Event 1c. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReportingIntervalEvent1c";
+ }
+ leaf hysteresis-event1a {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.HysteresisEvent1a";
+ }
+ leaf hysteresis-event1b {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.HysteresisEvent1b";
+ }
+ leaf hysteresis-event1c {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.HysteresisEvent1c";
+ }
+ leaf hysteresis-event1d {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.HysteresisEvent1d";
+ }
+ leaf hysteresis-event1e {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.HysteresisEvent1e";
+ }
+ leaf hysteresis-event1f {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.HysteresisEvent1f";
+ }
+ leaf time-to-trigger-event1a {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TimeToTriggerEvent1a";
+ }
+ leaf time-to-trigger-event1b {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TimeToTriggerEvent1b";
+ }
+ leaf time-to-trigger-event1c {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TimeToTriggerEvent1c";
+ }
+ leaf time-to-trigger-event1d {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TimeToTriggerEvent1d";
+ }
+ leaf time-to-trigger-event1e {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TimeToTriggerEvent1e";
+ }
+ leaf time-to-trigger-event1f {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.TimeToTriggerEvent1f";
+ }
+ leaf threshold-used-frequency-event1e {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for intra-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.39}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB {{enum|Pathloss|MeasurementQuantity}} has a range of 30 dB to 165 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ThresholdUsedFrequencyEvent1e";
+ }
+ leaf threshold-used-frequency-event1f {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for intra-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.39}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB {{enum|Pathloss|MeasurementQuantity}} has a range of 30 dB to 165 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ThresholdUsedFrequencyEvent1f";
+ }
+ leaf replacement-activation-threshold-event1c {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Defines the minimum number of cells allowed in the \"active cell set\" for Event 1c to occur. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.ReplacementActivationThresholdEvent1c";
+ }
+ leaf instance-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.InstanceNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.";
+ }
+
+ grouping umts-ran-intra-freq-meas-instance-g {
+ description
+ "Table containing parameters relating to a particular instance of intra-freq events.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.Alias";
+ }
+ leaf intra-frequency-event-identity {
+ type enumeration {
+ enum "1a" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 1a";
+ }
+ enum "1b" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 1b";
+ }
+ enum "1c" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 1c";
+ }
+ enum "1d" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 1d";
+ }
+ enum "1e" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 1e";
+ }
+ enum "1f" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 1f";
+ }
+ }
+ description
+ "Each entry is an Event ID from the list of: {{enum}} Defines the identity of the event used to trigger UE reporting (in case of event-triggered reporting). {{bibref|3GPP-TS.25.331|Section 10.3.7.34}} This attribute is readable, as it is highly dependent on how the FAP makes use of the event.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.IntraFrequencyEventIdentity";
+ }
+ leaf event-description {
+ type string {
+ length "0..256";
+ }
+ description
+ "A free-form description of the way the event instance is meant to be used. E.g. \"hand-out to macro cells\", \"addition of enterprise HNB cell to Active Set\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.EventDescription";
+ }
+ leaf measurement-quantity {
+ type enumeration {
+ enum "cpich ec/no" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.MeasurementQuantity - CPICH Ec/No";
+ }
+ enum "cpich rscp" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.MeasurementQuantity - CPICH RSCP";
+ }
+ enum "pathloss" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.MeasurementQuantity - Pathloss";
+ }
+ }
+ config false;
+ description
+ "Defines the measurement quantity for intra-freq HO measurement when the UE is in Cell-DCH state. Enumeration of: {{enum}} {{bibref|3GPP-TS.25.331|Section 10.3.7.38}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.MeasurementQuantity";
+ }
+ leaf filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the equivalent time constant of the low pass filter applied to the CPICH quality measurements, or {{enum|CPICH Ec/No|MeasurementQuantity}}. {{bibref|3GPP-TS.25.331|Section 8.6.7.2 and Section 10.3.7.9}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.FilterCoefficient";
+ }
+ leaf-list triggering-condition {
+ type enumeration {
+ enum "active" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TriggeringCondition - Active";
+ }
+ enum "monitored" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TriggeringCondition - Monitored";
+ }
+ enum "active and monitored" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TriggeringCondition - Active and Monitored";
+ }
+ enum "detected" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TriggeringCondition - Detected";
+ }
+ enum "detected and monitored" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TriggeringCondition - Detected and Monitored";
+ }
+ }
+ config false;
+ description
+ "{{list}} Indicates which cells can trigger the event instance. {{enum}} {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TriggeringCondition";
+ }
+ leaf reporting-range {
+ type uint8 {
+ range "0..29";
+ }
+ units "dB";
+ config false;
+ description
+ "Applicable to events 1a, 1b, otherwise not needed. Defines a constant in the inequality criterion that needs to be satisfied for an Event 1b to occur. Actual values of the range are 0.0 to 14.5 {{units}} in steps of 0.5 {{units}}. The value of {{param}} divided by 2 yields the actual value of the range. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.ReportingRange";
+ }
+ leaf weighting-factor {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Applicable to events 1a, 1b, otherwise not needed. Defines the weighting factor for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.WeightingFactor";
+ }
+ leaf report-deactivation-threshold {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Applicable to events 1a, otherwise not needed. Defines the maximum number of cells allowed in the \"active cell set\" for Event 1a to occur. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.ReportDeactivationThreshold";
+ }
+ leaf reporting-amount {
+ type int64;
+ config false;
+ description
+ "Applicable to events 1a, 1c, otherwise not needed. Defines the maximum number of MEASUREMENT REPORT messages sent by the UE in case of periodic reporting triggered by an Event 1a The value -1 is used to represent an unbounded maximum. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.ReportingAmount";
+ }
+ leaf reporting-interval {
+ type uint16 {
+ range "0 | 250 | 500 | 1000 | 2000 | 4000 | 8000 | 16000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Applicable to events 1a, 1c, otherwise not needed. Defines the transmission period in {{units}} of MEASUREMENT REPORT messages sent by the UE in case of periodic reporting triggered by an Event 1a. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.ReportingInterval";
+ }
+ leaf hysteresis {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for intra-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 14.1.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.Hysteresis";
+ }
+ leaf time-to-trigger {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for intra-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.TimeToTrigger";
+ }
+ leaf threshold-used-frequency {
+ type int64;
+ config false;
+ description
+ "Applicable to events 1e, 1f, otherwise not needed. Defines the reporting threshold for intra-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.39}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB {{enum|Pathloss|MeasurementQuantity}} has a range of 30 dB to 165 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.ThresholdUsedFrequency";
+ }
+ leaf replacement-activation-threshold {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Applicable only to event 1c Defines the minimum number of cells allowed in the \"active cell set\" for Event 1c to occur. {{bibref|3GPP-TS.25.331|Section 14.1.2 and Section 10.3.7.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.ReplacementActivationThreshold";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}.";
+ }
+
+ grouping umts-ran-inter-freq-meas-g {
+ description
+ "This object contains parameters relating to the inter-freq HO related control parameters.";
+ leaf measurement-quantity {
+ type enumeration {
+ enum "cpich ec/no" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.MeasurementQuantity - CPICH Ec/No";
+ }
+ enum "cpich rscp" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.MeasurementQuantity - CPICH RSCP";
+ }
+ }
+ config false;
+ description
+ "Defines the measurement quantity for inter-freq HO measurement when the UE is in Cell-DCH state. Enumeration of: {{enum}} {{bibref|3GPP-TS.25.331|Section 10.3.7.18}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.MeasurementQuantity";
+ }
+ leaf filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the filter coefficient for inter-freq HO measurement when the UE is in Cell-DCH state. {{bibref|3GPP-TS.25.331|Section 10.3.7.9 and Section 10.3.7.18}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.FilterCoefficient";
+ }
+ leaf-list inter-frequency-event-identity {
+ type string;
+ config false;
+ max-elements "32";
+ description
+ "{{list}} Each entry is an Event ID from the list of: 2a, 2b, 2c, 2d, 2e,2f Defines the identity of the event used to trigger inter-frequency UE reporting (in case of event-triggered reporting). {{bibref|3GPP-TS.25.331|Section 10.3.7.14}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.InterFrequencyEventIdentity";
+ }
+ leaf weighting-factor-event2a {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.WeightingFactorEvent2a";
+ }
+ leaf weighting-factor-event2b {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.WeightingFactorEvent2b";
+ }
+ leaf weighting-factor-event2d {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.WeightingFactorEvent2d";
+ }
+ leaf weighting-factor-event2f {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.WeightingFactorEvent2f";
+ }
+ leaf hysteresis-event2a {
+ type uint8 {
+ range "0..29";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 14.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.HysteresisEvent2a";
+ }
+ leaf hysteresis-event2b {
+ type uint8 {
+ range "0..29";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 14.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.HysteresisEvent2b";
+ }
+ leaf hysteresis-event2d {
+ type uint8 {
+ range "0..29";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 14.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.HysteresisEvent2d";
+ }
+ leaf hysteresis-event2f {
+ type uint8 {
+ range "0..29";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 14.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.HysteresisEvent2f";
+ }
+ leaf time-to-trigger-event2a {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.19 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.TimeToTriggerEvent2a";
+ }
+ leaf time-to-trigger-event2b {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.19 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.TimeToTriggerEvent2b";
+ }
+ leaf time-to-trigger-event2d {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.19 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.TimeToTriggerEvent2d";
+ }
+ leaf time-to-trigger-event2f {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.19 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.TimeToTriggerEvent2f";
+ }
+ leaf threshold-used-frequency-event2b {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for inter-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.ThresholdUsedFrequencyEvent2b";
+ }
+ leaf threshold-used-frequency-event2d {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for inter-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.ThresholdUsedFrequencyEvent2d";
+ }
+ leaf threshold-used-frequency-event2f {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for inter-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.ThresholdUsedFrequencyEvent2f";
+ }
+ leaf instance-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.InstanceNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.";
+ }
+
+ grouping umts-ran-inter-freq-meas-instance-g {
+ description
+ "Table containing parameters relating to a particular instance of inter-freq events.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.Alias";
+ }
+ leaf intra-frequency-event-identity {
+ type enumeration {
+ enum "2a" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 2a";
+ }
+ enum "2b" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 2b";
+ }
+ enum "2c" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 2c";
+ }
+ enum "2d" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 2d";
+ }
+ enum "2e" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 2e";
+ }
+ enum "2f" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity - 2f";
+ }
+ }
+ description
+ "Each entry is an Event ID from the list of: {{enum}} Defines the identity of the event used to trigger UE reporting (in case of event-triggered reporting). {{bibref|3GPP-TS.25.331|Section 10.3.7.14}} This attribute is readable, as it is highly dependent on how the FAP makes use of the event.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.IntraFrequencyEventIdentity";
+ }
+ leaf event-description {
+ type string {
+ length "0..256";
+ }
+ description
+ "A free-form description of the way the event instance is meant to be used. E.g. \"detecting cell edge to prepare for hand-out\", \"cancel hand-out preparation\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.EventDescription";
+ }
+ leaf measurement-quantity {
+ type enumeration {
+ enum "cpich ec/no" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.MeasurementQuantity - CPICH Ec/No";
+ }
+ enum "cpich rscp" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.MeasurementQuantity - CPICH RSCP";
+ }
+ }
+ config false;
+ description
+ "Defines the measurement quantity for inter-freq HO measurement when the UE is in Cell-DCH state. Enumeration of: {{enum}} {{bibref|3GPP-TS.25.331|Section 10.3.7.18}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.MeasurementQuantity";
+ }
+ leaf filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the filter coefficient for inter-freq HO measurement when the UE is in Cell-DCH state. {{bibref|3GPP-TS.25.331|Section 10.3.7.9 and Section 10.3.7.18}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.FilterCoefficient";
+ }
+ leaf weighting-factor {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.WeightingFactor";
+ }
+ leaf hysteresis {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-freq HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 14.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.Hysteresis";
+ }
+ leaf time-to-trigger {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-freq HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.TimeToTrigger";
+ }
+ leaf threshold-used-frequency {
+ type int64;
+ config false;
+ description
+ "Applicable to events 2b, 2d, 2f, otherwise not needed. Defines the reporting threshold for inter-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.ThresholdUsedFrequency";
+ }
+ leaf threshold-non-used-frequency {
+ type int64;
+ config false;
+ description
+ "Applicable to events 2a, 2b, 2c, 2e otherwise not needed. Defines the reporting threshold for inter-freq HO measurement when the UE is in Cell-DCH state. This is the \"Threshold non used frequency\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.19}}. Each valid value of {{param|MeasurementQuantity}} has a different valid range. {{enum|CPICH RSCP|MeasurementQuantity}} has a range of -120 dBm to -25 dBm {{enum|CPICH Ec/No|MeasurementQuantity}} has a range of -24 dB to 0 dB";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.ThresholdNonUsedFrequency";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}.";
+ }
+
+ grouping umts-ran-inter-rat-meas-g {
+ description
+ "This object contains parameters relating to the inter-RAT HO related control parameters. This is specifically for GERAN system.";
+ leaf gsm-filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the filter coefficient for inter-RAT HO measurement when the UE is in Cell-DCH state. {{bibref|3GPP-TS.25.331|Section 10.3.7.9 and Section 10.3.7.29}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.GSMFilterCoefficient";
+ }
+ leaf bsic-verification-required {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the BSIC verification is required or not for inter-RAT HO measurement when the UE is in Cell-DCH state. {{bibref|3GPP-TS.25.331|Section 10.3.7.29}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.BSICVerificationRequired";
+ }
+ leaf weighting-factor {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-RAT HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.WeightingFactor";
+ }
+ leaf hysteresis {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-RAT HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Hysteresis";
+ }
+ leaf time-to-trigger {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-RAT HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.TimeToTrigger";
+ }
+ leaf threshold-own-system {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for inter-RAT HO measurement when the UE is in Cell-DCH state. This is the \"Threshold own system\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.ThresholdOwnSystem";
+ }
+ leaf threshold-other-system {
+ type int64;
+ config false;
+ description
+ "Defines the reporting threshold for inter-RAT HO measurement when the UE is in Cell-DCH state. This is the \"Threshold other system\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.ThresholdOtherSystem";
+ }
+ leaf instance-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.InstanceNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.";
+ }
+
+ grouping umts-ran-inter-rat-meas-instance-g {
+ description
+ "Table containing parameters relating to a particular instance of inter-freq events.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.Alias";
+ }
+ leaf inter-rat-event-identity {
+ type enumeration {
+ enum "3a" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.InterRATEventIdentity - 3a";
+ }
+ enum "3b" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.InterRATEventIdentity - 3b";
+ }
+ enum "3c" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.InterRATEventIdentity - 3c";
+ }
+ enum "3d" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.InterRATEventIdentity - 3d";
+ }
+ }
+ description
+ "Each entry is an Event ID from the list of: {{enum}} Defines the identity of the event used to trigger UE reporting (in case of event-triggered reporting). {{bibref|3GPP-TS.25.331|Section 10.3.7.14}} This attribute is readable, as it is highly dependent on how the FAP makes use of the event.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.InterRATEventIdentity";
+ }
+ leaf event-description {
+ type string {
+ length "0..256";
+ }
+ description
+ "A free-form description of the way the event instance is meant to be used. E.g. \"hand-out to GSM macrocell\", \"cancel hand-out preparation due to decreasing macrocell quality\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.EventDescription";
+ }
+ leaf filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the filter coefficient for inter-freq HO measurement when the UE is in Cell-DCH state. {{bibref|3GPP-TS.25.331|Section 10.3.7.9 and Section 10.3.7.18}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.FilterCoefficient";
+ }
+ leaf bsic-verification-required {
+ type boolean;
+ config false;
+ description
+ "Applicable only to GSM events. Indicates whether the BSIC verification is required or not for inter-RAT HO measurement when the UE is in Cell-DCH state. {{bibref|3GPP-TS.25.331|Section 10.3.7.29}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.BSICVerificationRequired";
+ }
+ leaf weighting-factor {
+ type uint8 {
+ range "0..20";
+ }
+ config false;
+ description
+ "Defines the weighting factor for inter-RAT HO measurement when the UE is in Cell-DCH state. Actual values of the weighting factor are 0.0 to 2.0 in steps of 0.1. The value of {{param}} divided by 10 yields the actual value of the weighting factor. {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.WeightingFactor";
+ }
+ leaf hysteresis {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Defines the hysteresis for inter-RAT HO measurement when the UE is in Cell-DCH state. Actual values of the range are 0.0 to 7.5 in steps of 0.5. The value of {{param}} divided by 2 yields the actual value of the hysteresis. {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.Hysteresis";
+ }
+ leaf time-to-trigger {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the time-to-trigger in {{units}} for inter-RAT HO measurement when the UE is in Cell-DCH state. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.39 and Section 10.3.7.64}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.TimeToTrigger";
+ }
+ leaf threshold-own-system {
+ type int64;
+ config false;
+ description
+ "Applicable only to event 3a, otherwise not needed. Defines the reporting threshold for inter-RAT HO measurement when the UE is in Cell-DCH state. This is the \"Threshold own system\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.ThresholdOwnSystem";
+ }
+ leaf threshold-other-system {
+ type int64;
+ config false;
+ description
+ "Applicable to events 3a, 3b, 3c, otherwise not needed. Defines the reporting threshold for inter-RAT HO measurement when the UE is in Cell-DCH state. This is the \"Threshold other system\" as defined in {{bibref|3GPP-TS.25.331|Section 10.3.7.30}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.ThresholdOtherSystem";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}.";
+ }
+
+ grouping umts-ran-ue-internal-meas-g {
+ description
+ "This object contains parameters relating to the UE internal measurement control parameters.";
+ leaf filter-coefficient {
+ type uint8 {
+ range "0..9 | 11 | 13 | 15 | 17 | 19";
+ }
+ config false;
+ description
+ "Defines the filter coefficient for UE internal measurement. {{bibref|3GPP-TS.25.331|Section 10.3.7.9 and Section 10.3.7.79}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.FilterCoefficient";
+ }
+ leaf ue-tx-pwr-threshold-event6a {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Defines the threshold for UE transmit power above which Event 6a is reported. {{bibref|3GPP-TS.25.331|Section 10.3.7.80}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.UETxPwrThresholdEvent6a";
+ }
+ leaf time-to-trigger-event6a {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the period in {{units}} between detection of Event 6a and sending of Measurement Report. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.80}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.TimeToTriggerEvent6a";
+ }
+ leaf ue-tx-pwr-threshold-event6b {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Defines the threshold for UE transmit power above which Event 6b is reported. {{bibref|3GPP-TS.25.331|Section 10.3.7.80}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.UETxPwrThresholdEvent6b";
+ }
+ leaf time-to-trigger-event6b {
+ type uint16 {
+ range "0 | 10 | 20 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | 240 | 320 | 640 | 1280 | 2560 | 5000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the period in {{units}} between detection of Event 6b and sending of Measurement Report. Only the specified values are considered valid, any value other than those and the CPE MUST reject the request. {{bibref|3GPP-TS.25.331|Section 10.3.7.80}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.TimeToTriggerEvent6b";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas.";
+ }
+
+ grouping umts-ran-rf-g {
+ description
+ "This object contains parameters relating to the RF configuration.";
+ leaf-list uarfcndl {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a DL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433|Section 9.2.1.65}} Self-configuration for UARFCN is controlled by {{param|.Capabilities.UMTS.SelfConfig.UARFCNConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.UARFCNSelfConfigEnable}} from an enabled perspective. If the FAP's self-configuration capability for UARFCN is available and enabled, this parameter MAY contain more than one item and the FAP is expected to select one from the list for {{param|UARFCNDLInUse}}. If the self-configuration capability is not available or not enabled, then this parameter SHOULD contain only a single item. The UARFCN values supplied to the list are derived based on the formula defined in {{bibref|3GPP-TS.25.104|Section 5.4.3}} The order of the UARFCN entries has no significance. The carrier spacing in FDD mode is fixed as defined in {{bibref|3GPP-TS.25.104}}. Therefore, the FAP can unambiguously derive the UL UARFCN value based on the selected DL UARFCN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.UARFCNDL";
+ }
+ leaf uarfcndl-in-use {
+ type uint64;
+ description
+ "The DL UARFCN being used by the FAP. Self-configuration for UARFCN is controlled by {{param|.Capabilities.UMTS.SelfConfig.UARFCNConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.UARFCNSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|UARFCNDL}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first value in {{param|UARFCNDL}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.UARFCNDLInUse";
+ }
+ leaf uarfcnul-in-use {
+ type uint64;
+ description
+ "The UL UARFCN being used by the FAP. The UL UARFCN that corresponds to {{param|UARFCNDLInUse}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.UARFCNULInUse";
+ }
+ leaf-list uarfcndl-to-protect {
+ type string;
+ config false;
+ max-elements "64";
+ description
+ "{{list}} Each item is a DL UARFCNs to be protected from adjacent channel interference. \"Adjacent channel\" in this context means offset from the FAP's UARFCN by 5MHz. {{bibref|3GPP-TS.25.104|Section 6.4.6}} If any of the items in the list are adjacent to the FAP's own DL channel, the FAP MUST take the Primary CPICH code power measured on these channels into account as part of its maximum transmit power self-configuration. The UARFCNs in the list can belong to any operator, allowing for protection of the FAP operator's own macro layer as well as that of other operators (only the latter is mandated by the {{bibref|3GPP-TS.25.104}} requirements). The list SHOULD take into account the ability of the FAP to self-configure its own DL UARFCN and so SHOULD include any channels (requiring protection) which can potentially be adjacent to the UARFCN selected by the FAP. For example, if only adjacent operator protection is required and the FAP has the ability to self-configure to any channel owned by its operator, this list would be populated with the UARFCNs immediately above and below the range of channels owned by the FAP operator. Adjacent channel protection can cause the FAP transmit power to be reduced down to as low as 8dBm. If {{empty}} then it indicates that there are no channels adjacent to the FAP that require protection, or that self-configuration of the FAP transmit power is not enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.UARFCNDLToProtect";
+ }
+ leaf-list primary-scrambling-code {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a Primary DL Scrambling Code used by the FDD mode cell with a numeric range between 0 and 511 inclusive. {{bibref|3GPP-TS.25.433|Section 9.2.2.34}} Self-configuration for PSC is controlled by {{param|.Capabilities.UMTS.SelfConfig.PrimaryScramblingCodeConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.PrimaryScramblingCodeSelfConfigEnable}} from an enabled perspective. If the FAP's self-configuration capability for {{param}} is available and enabled, this parameter MAY contain more than one item and the FAP is expected to select one from the list for {{param|PrimaryScramblingCodeInUse}}. If the self-configuration capability is not available or not enabled, then this parameter SHOULD contain only a single item. The multiplicity of the PSC values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. The following are examples of valid PSC string: :\"20\" ::(explicitly specifies a single PSC value) :\"20,30,40\" ::(specifies 3 possible PSC values to select from) \"20..40\" ::(specifies 21 possible values between 20 and 40, inclusive) \"20..40,50\" ::(specifies 22 possible values between 20 and 40 inclusive and a single value 50) The order of the items has no significance.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PrimaryScramblingCode";
+ }
+ leaf primary-scrambling-code-in-use {
+ type uint64;
+ description
+ "The PSC being used by the FAP. Self-configuration for PSC is controlled by {{param|.Capabilities.UMTS.SelfConfig.PrimaryScramblingCodeConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.PrimaryScramblingCodeSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|PrimaryScramblingCode}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first value in {{param|PrimaryScramblingCode}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PrimaryScramblingCodeInUse";
+ }
+ leaf maxfap-tx-power-expanded {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Defines the maximum transmission power allowed on the FAP, maximum value for the linear sum of the power of all downlink physical channels, that is allowed to be used in a cell. {{param}} is expressed as a range of allowed maximum power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<Pmax_low>..<Pmax_high>\". {{param}} identifies the limits between which the FAP can self-configure its maximum transmit power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.UMTS.SelfConfig.MaxFAPTxPowerExpandedConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.MaxFAPTxPowerExpandedSelfConfigEnable}} from an enabled perspective. <Pmax_low> and <Pmax_high> are measured in dBm and have a range of -30.0 to 20.0 incremented by 0.1 dB. {{bibref|3GPP-TS.32.642|Section 6.3.9}} {{bibref|3GPP-TS.25.104|Section 6.2.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.MaxFAPTxPowerExpanded";
+ }
+ leaf maxfap-tx-power-in-use-expanded {
+ type int64;
+ units "dBm";
+ description
+ "The maximum transmission power measured in {{units}} currently used by the FAP. Actual values of the maximum transmission power are -30.0 {{units}} to 20.0 {{units}} in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the maximum transmission power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.UMTS.SelfConfig.MaxFAPTxPowerExpandedConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.MaxFAPTxPowerExpandedSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the range provided in {{param|MaxFAPTxPowerExpanded}}. If the self-configuration capability is not available or not enabled, then this parameter contains a value selected by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.MaxFAPTxPowerInUseExpanded";
+ }
+ leaf max-ul-tx-power {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Defines the maximum transmission power level a UE can use on PRACH. {{param}} is expressed as a range of allowed maximum power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<Pmax_low>..<Pmax_high>\". {{param}} identifies the limits between which the FAP can self-configure its maximum transmit power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.UMTS.SelfConfig.MaxULTxPowerConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.MaxULTxPowerSelfConfigEnable}} from an enabled perspective. <Pmax_low> and <Pmax_high> are measured in dBm and have a range of -50 to 33 incremented by 1. {{bibref|3GPP-TS.25.331|Section 10.3.6.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.MaxULTxPower";
+ }
+ leaf max-ul-tx-power-in-use {
+ type int64;
+ units "dBm";
+ description
+ "The maximum transmission power level a UE can use on PRACH. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.UMTS.SelfConfig.MaxULTxPowerConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.MaxULTxPowerSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the range provided in {{param|MaxULTxPower}}. If the self-configuration capability is not available or not enabled, then this parameter contains a value selected by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.MaxULTxPowerInUse";
+ }
+ leaf pcpich-power {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "The value of the transmission power of the Primary Common PIlot CHannel (P-CPICH). The P-CPICH physical channel carries the common pilots of the cell. Parameter in SIB5. {{param}} is expressed as a range of allowed transmission power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<Pmax_low>..<Pmax_high>\". {{param}} identifies the limits between which the FAP can self-configure its transmission power. Self-configuration for transmission power is controlled by {{param|.Capabilities.UMTS.SelfConfig.PCPICHPowerConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.PCPICHPowerSelfConfigEnable}} from an enabled perspective. <Pmax_low> and <Pmax_high> are measured in dBm and have a range of -10.0 to 20.0 incremented by 0.1 dB. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.104|Section 6.2.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PCPICHPower";
+ }
+ leaf pcpich-power-in-use {
+ type int64;
+ units "dBm";
+ description
+ "The P-CPICH power measured in {{units}} currently used by the FAP. Actual values of the maximum transmission power are -10.0 {{units}} to 20.0 {{units}} in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the maximum transmission power. Self-configuration for transmission power is controlled by {{param|.Capabilities.UMTS.SelfConfig.PCPICHPowerConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.PCPICHPowerSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the range provided in {{param|PCPICHPower}}. If the self-configuration capability is not available or not enabled, then this parameter contains a value selected by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PCPICHPowerInUse";
+ }
+ leaf power-offset-pilot-dpdch {
+ type uint8 {
+ range "0..24";
+ }
+ units "dB";
+ config false;
+ description
+ "Defines the power offset between pilot channel and DPDCH. Actual values of the offset are 0.0 {{units}} to 6.0 {{units}} in steps of 0.25 {{units}}. The value of {{param}} divided by 4 yields the actual value of the offset. {{bibref|3GPP-TS.25.331|Section 10.3.6.18}} {{bibref|3GPP-TS.25.214|Section 5.2.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PowerOffsetPilotDPDCH";
+ }
+ leaf fap-coverage-target {
+ type uint8 {
+ range "50..150";
+ }
+ units "dB";
+ config false;
+ description
+ "Defines the target value measured in {{units}} for the range of the FAP's DL coverage, in terms of RF propagation loss. This value can be used by the FAP's self-configuration algorithms to help derive transmit power levels in the presence of co-channel and adjacent channel interference. {{bibref|3GPP-TS.25.967|Section 7.2.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.FAPCoverageTarget";
+ }
+ leaf fap-quality-target-ec-io {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the target value measured in dB for the downlink signal quality of the FAP in terms of CPICH Ec/Io, thereby clarifying the meaning of \"FAPCoverageTarget\". Actual values of the FAPQualityTargetEcIo are -20 dB to 0 dB in steps of 0.1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.FAPQualityTargetEcIo";
+ }
+ leaf psch-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the transmission power offset measured in {{units}} of the Primary SCH relative to the Primary CPICH power. Actual values of the transmission power offset are -35.0 {{units}} to 15.0 {{units}} in steps of 0.1 {{units}}. The value of {{param}} divided by 10 yields the actual value of the transmission power offset. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 9.1.24 and Section 9.2.1.21}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PSCHPower";
+ }
+ leaf ssch-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the transmission power offset measured in {{units}} of the Secondary SCH relative to the Primary CPICH power. Actual values of the transmission power offset are -35.0 {{units}} to 15.0 {{units}} in steps of 0.1 {{units}}. The value of {{param}} divided by 10 yields the actual value of the transmission power offset. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 9.1.24 and Section 9.2.1.21}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.SSCHPower";
+ }
+ leaf pich-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the maximum transmission power offset measured in {{units}} of the PICH channel relative to the Primary CPICH transmission power. {{bibref|3GPP-TS.32.642|Section 6.3.9}} {{bibref|3GPP-TS.25.433|Section 9.2.1.49A}} {{bibref|3GPP-TS.25.331|Section 10.3.6.50}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PICHPower";
+ }
+ leaf pch-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the transmission power offset measured in {{units}} of the PCH relative to the Primary CPICH power. Actual values of the transmission power offset are -35.0 {{units}} to 15.0 {{units}} in steps of 0.1 {{units}}. The value of {{param}} divided by 10 yields the actual value of the transmission power offset. {{bibref|3GPP-TS.32.642|Section 6.3.9}} {{bibref|3GPP-TS.25.433|Section 9.1.3.1 and Section 9.2.1.21}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.PCHPower";
+ }
+ leaf fach-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the transmission power offset measured in {{units}} of the FACH relative to the Primary CPICH power. Actual values of the transmission power offset are -35.0 {{units}} to 15.0 {{units}} in steps of 0.1 {{units}}. The value of {{param}} divided by 10 yields the actual value of the transmission power offset. {{bibref|3GPP-TS.32.642|Section 6.3.9}} {{bibref|3GPP-TS.25.433|Section 9.1.6.1 and Section 9.2.1.21}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.FACHPower";
+ }
+ leaf bch-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the transmission power offset measured in {{units}} of the BCH relative to the Primary CPICH power. Actual values of the transmission power offset are -35.0 {{units}} to 15.0 {{units}} in steps of 0.1 {{units}}. The value of {{param}} divided by 10 yields the actual value of the transmission power offset. {{bibref|3GPP-TS.32.642|Section 9.3.11}} {{bibref|3GPP-TS.25.433|Section 9.1.24 and Section 9.2.1.21}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.BCHPower";
+ }
+ leaf aich-power {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Defines the transmission power offset measured in {{units}} of one AICH relative to the Primary CPICH power. Parameter defined in SIB5 {{bibref|3GPP-TS.25.331|Section 10.3.6.3}}. Transmission power level of AICH, AP-AICH and CD/CA-ICH channels compared to CPICH. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 9.2.2.D}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.AICHPower";
+ }
+ leaf ctch-allocation-period {
+ type uint8 {
+ range "1..255";
+ }
+ config false;
+ description
+ "The value defines 'N' multiples of M(TTI) for CBS DRX calculations at the UE side.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.CTCHAllocationPeriod";
+ }
+ leaf cbs-frame-offset {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Value of CBS frame offset (CTCH) on DL FACH. Parameter in SIB5";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.CBSFrameOffset";
+ }
+ leaf max-tti {
+ type uint8 {
+ range "1..255";
+ }
+ config false;
+ description
+ "Defines the number of radio frames in the TTI of the FACH used for CTCH (MTTI).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.MaxTTI";
+ }
+ leaf noise-rise-limit-lower-value {
+ type uint16 {
+ range "0..500";
+ }
+ config false;
+ description
+ "Defines the lower value of the Noise Rise Limit range that UMTS FAP is allowed to pick from. The value is measured in dB and has a range of 0.0 to 50.0 incremented by 0.1 dB. the value MUST not exceed the value of {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitUpperValue}} The Noise Rise Limit range identifies the limits between which the FAP can self-configure its uplink noise rise limit. Self-configuration for noise rise limit is controlled by {{param|.Capabilities.UMTS.SelfConfig.NoiseRiseLimitConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.NoiseRiseLimitConfigEnable}} from an enabled perspective.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.NoiseRiseLimitLowerValue";
+ }
+ leaf noise-rise-limit-upper-value {
+ type uint16 {
+ range "0..500";
+ }
+ config false;
+ description
+ "Defines the upper value of the Noise Rise Limit range that UMTS FAP is allowed to pick from. The value is measured in dB and has a range of 0.0 to 50.0 incremented by 0.1 dB. the value MUST not be below the value of {{param|.CellConfig.UMTS.RAN.RF.NoiseRiseLimitLowerValue}} NoiseRiseLimit identifies the limits between which the FAP can self-configure its uplink noise rise limit. Self-configuration for noise rise limit is controlled by {{param|.Capabilities.UMTS.SelfConfig.NoiseRiseLimitConfig}} from an availability perspective and {{param|.FAPControl.UMTS.SelfConfig.NoiseRiseLimitConfigEnable}} from an enabled perspective.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.NoiseRiseLimitUpperValue";
+ }
+ leaf noise-rise-limit-in-use {
+ type uint16 {
+ range "0..500";
+ }
+ description
+ "Actual value of the Noise Rise Limit that the FAP uses. The value is measured in dB and has a range of 0.0 to 50.0 incremented by 0.1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.NoiseRiseLimitInUse";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.RF.";
+ }
+
+ grouping umts-ran-neighbor-list-g {
+ description
+ "This object contains parameters relating to the neighbor list.";
+ leaf max-intra-freq-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.MaxIntraFreqCellEntries";
+ }
+ leaf max-inter-freq-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.MaxInterFreqCellEntries";
+ }
+ leaf intra-freq-cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCellNumberOfEntries";
+ }
+ leaf inter-freq-cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCellNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.";
+ }
+
+ grouping umts-ran-neighbor-list-intra-freq-cell-g {
+ description
+ "Table containing the intra-frequency cell list provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.MustInclude";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ config false;
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.PLMNID";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "RNC-ID of an intra-freq neighbor cell. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.RNCID";
+ }
+ leaf cid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Cell Identifier (C-id) that identifies a cell within an RNS. This Cell Identifier together with the controlling RNC (RNC-ID) constitutes the UTRAN Cell ID (UC-ID) and is used to identify a cell uniquely within UTRAN. C-ID is either 12-bit or 16-bit value. {{bibref|3GPP-TS.25.401|Section 6.1.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.CID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65533 | 65535";
+ }
+ config false;
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Routing Area Code (RAC). The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.RAC";
+ }
+ leaf ura {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "UTRAN Registration Area (URA) {{bibref|3GPP-TS.23.401}}. Indicates to the UE which {{param}} it shall use in case of overlapping URAs. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.URA";
+ }
+ leaf pcpich-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Primary CPICH scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.PCPICHScramblingCode";
+ }
+ leaf pcpich-tx-power {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Primary CPICH Tx power in {{units}}. Actual values of the power are -10.0 {{units}} to 50.0 {{units}} in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the power. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 2.2.33}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.PCPICHTxPower";
+ }
+ leaf collocated-inter-freq-cell {
+ type uint32 {
+ range "0..268435455";
+ }
+ config false;
+ description
+ "Provides identity of collocated inter-frequency Cell. Needed for pathloss estimation, in case the femto environment masks intra-frequency neighbor. Cell Identity. {{bibref|3GPP-TS.25.331|Section 10.3.2.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.CollocatedInterFreqCell";
+ }
+ leaf max-tx-power {
+ type int64;
+ units "0.1 dBm";
+ config false;
+ description
+ "Cell Max Tx Power. Parameter needed in HNB power calibration, for protection of neighbour cells. Actual values of the power are -30.0 dBm to 60.0 dBm in steps of 0.1 dB. The value of MaxTxPower divided by 10 yields the actual value of the power. C.f {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.104|Section 6.2.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.MaxTxPower";
+ }
+ leaf max-dpc-htx-power {
+ type int64;
+ units "0.1 dBm";
+ config false;
+ description
+ "Maximum DL DPCH Tx Power per UE configured in the cell (for CS UEs). Parameter may be used by FAP to protect the DL budget allocated to neighbouring UEs served by neighbour cells. C.f (max 10 dB below max Tx power) {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.104|Section 6.2.1}} Actual values of the power are -40.0 dBm to 50.0 dBm in steps of 0.1 dB. The value of MaxDPCHtxPower divided by 10 yields the actual value of the power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.MaxDPCHtxPower";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.";
+ }
+
+ grouping umts-ran-neighbor-list-inter-freq-cell-g {
+ description
+ "Table containing the inter-frequency cell list provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.MustInclude";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ config false;
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.PLMNID";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "RNC-ID of an intra-freq neighbor cell. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.RNCID";
+ }
+ leaf cid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Cell Identifier (C-id) that identifies a cell within an RNS. This Cell Identifier together with the controlling RNC (RNC-ID) constitutes the UTRAN Cell ID (UC-ID) and is used to identify a cell uniquely within UTRAN. C-ID is either 12-bit or 16-bit value. {{bibref|3GPP-TS.25.401|Section 6.1.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.CID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65533 | 65535";
+ }
+ config false;
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Routing Area Code (RAC). The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.RAC";
+ }
+ leaf ura {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "UTRAN Registration Area (URA) {{bibref|3GPP-TS.23.401}}. Indicates to the UE which {{param}} it shall use in case of overlapping URAs. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.URA";
+ }
+ leaf uarfcnul {
+ type uint16 {
+ range "0..16383";
+ }
+ config false;
+ description
+ "The UL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.UARFCNUL";
+ }
+ leaf uarfcndl {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "The DL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.UARFCNDL";
+ }
+ leaf pcpich-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Primary CPICH scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.PCPICHScramblingCode";
+ }
+ leaf pcpich-tx-power {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Primary CPICH Tx power in {{units}}. Actual values of the power are -10.0 {{units}} to 50.0 {{units}} in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the power. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 2.2.33}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.PCPICHTxPower";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.";
+ }
+
+ grouping umts-ran-neighbor-list-inter-rat-cell-g {
+ description
+ "The inter-RAT cell lists separated by technology. {{bibref|3GPP-TS.25.331|Section 10.3.7.23}}";
+ leaf max-gsm-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.MaxGSMEntries";
+ }
+ leaf gsm-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSMNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.";
+ }
+
+ grouping umts-ran-neighbor-list-inter-rat-cell-gsm-g {
+ description
+ "Table containing the inter-RAT cell list for GSM provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.MustInclude";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ config false;
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.PLMNID";
+ }
+ leaf lac {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.LAC";
+ }
+ leaf bsic {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "BSIC of the cell per {{bibref|3GPP-TS.23.003}}, consisting of: :Bit 7:6 - not used (\"00\") :Bit 5:3 - NCC (PLMN Color Code) :Bit 2:0 - BCC (BS color code) For example, if NCC is 7 and BCC is 2 you would have 00111010 (binary) or 0x3A (hex), and the value of this parameter would be 58.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BSIC";
+ }
+ leaf ci {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Cell ID of the cell per {{bibref|3GPP-TS.23.003|Section 4.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.CI";
+ }
+ leaf band-indicator {
+ type enumeration {
+ enum "gsm 850" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - GSM 850";
+ }
+ enum "gsm 900" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - GSM 900";
+ }
+ enum "dcs 1800" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - DCS 1800";
+ }
+ enum "pcs 1900" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - PCS 1900";
+ }
+ }
+ config false;
+ description
+ "Indicates how to interpret the BCCH ARFCN. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator";
+ }
+ leaf bccharfcn {
+ type uint16 {
+ range "0..1023";
+ }
+ description
+ "ARFCN of this cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.BCCHARFCN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.";
+ }
+
+ grouping umts-ran-neighbor-list-in-use-g {
+ description
+ "This object contains parameters relating to the neighbor list used by the FAP based on its self-configuration capability and {{object|.CellConfig.UMTS.RAN.NeighborList.}} configuration of adding and excluding cells.";
+ leaf max-intra-freq-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.MaxIntraFreqCellEntries";
+ }
+ leaf max-inter-freq-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.MaxInterFreqCellEntries";
+ }
+ leaf intra-freq-cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCellNumberOfEntries";
+ }
+ leaf inter-freq-cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCellNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.";
+ }
+
+ grouping umts-ran-neighbor-list-in-use-intra-freq-cell-g {
+ description
+ "Table containing the intra-frequency cell list.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.PLMNID";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "RNC-ID of an intra-freq neighbor cell. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.RNCID";
+ }
+ leaf cid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "C-ID of the intra-freq neighbour cell {{bibref|3GPP-TS.25.401|Section 6.1.5}}. If {{param|RNCID}} is larger than 4095, then {{param}} will be 12 bits (i.e. a range of [0:4095]), else {{param}} is 16 bits long (i.e. range of [4096:65535]). This is needed to facilitate Femto to Macro handover. Used in {{bibref|3GPP-TS.25.413|Section 9.2.1.28}} as part of Target Cell ID.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.CID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65533 | 65535";
+ }
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "Routing Area Code (RAC). The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.RAC";
+ }
+ leaf ura {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "UTRAN Registration Area (URA) {{bibref|3GPP-TS.23.401}}. Indicates to the UE which {{param}} it shall use in case of overlapping URAs. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.URA";
+ }
+ leaf pcpich-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Primary CPICH scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.PCPICHScramblingCode";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.IntraFreqCell.{i}.";
+ }
+
+ grouping umts-ran-neighbor-list-in-use-inter-freq-cell-g {
+ description
+ "Table containing the inter-frequency cell list.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.PLMNID";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "RNC-ID of an intra-freq neighbor cell. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.RNCID";
+ }
+ leaf cid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "C-ID of the intra-freq neighbour cell {{bibref|3GPP-TS.25.401|Section 6.1.5}}. If {{param|RNCID}} is larger than 4095, then {{param}} will be 12 bits (i.e. a range of [0:4095]), else {{param}} is 16 bits long (i.e. range of [4096:65535]). This is needed to facilitate Femto to Macro handover. Used in {{bibref|3GPP-TS.25.413|Section 9.2.1.28}} as part of Target Cell ID.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.CID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65533 | 65535";
+ }
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "Routing Area Code (RAC). The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.RAC";
+ }
+ leaf ura {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "UTRAN Registration Area (URA) {{bibref|3GPP-TS.23.401}}. Indicates to the UE which {{param}} it shall use in case of overlapping URAs. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.URA";
+ }
+ leaf uarfcnul {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "The UL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.UARFCNUL";
+ }
+ leaf uarfcndl {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "The DL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.UARFCNDL";
+ }
+ leaf pcpich-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Primary CPICH scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.PCPICHScramblingCode";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterFreqCell.{i}.";
+ }
+
+ grouping umts-ran-neighbor-list-in-use-inter-rat-cell-g {
+ description
+ "The inter-RAT cell lists separated by technology. {{bibref|3GPP-TS.25.331|Section 10.3.7.23}}";
+ leaf max-gsm-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.MaxGSMEntries";
+ }
+ leaf gsm-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSMNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.";
+ }
+
+ grouping umts-ran-neighbor-list-in-use-inter-rat-cell-gsm-g {
+ description
+ "Table containing the inter-RAT cell list for GSM.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.PLMNID";
+ }
+ leaf lac {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.LAC";
+ }
+ leaf bsic {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "BSIC of the cell per {{bibref|3GPP-TS.23.003}}, consisting of: :Bit 7:6 - not used (\"00\") :Bit 5:3 - NCC (PLMN Color Code) :Bit 2:0 - BCC (BS color code) For example, if NCC is 7 and BCC is 2 you would have 00111010 (binary) or 0x3A (hex), and the value of this parameter would be 58.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BSIC";
+ }
+ leaf ci {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Cell ID of the cell per {{bibref|3GPP-TS.23.003|Section 4.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.CI";
+ }
+ leaf band-indicator {
+ type enumeration {
+ enum "gsm 850" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - GSM 850";
+ }
+ enum "gsm 900" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - GSM 900";
+ }
+ enum "dcs 1800" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - DCS 1800";
+ }
+ enum "pcs 1900" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - PCS 1900";
+ }
+ }
+ description
+ "Indicates how to interpret the BCCH ARFCN. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator";
+ }
+ leaf bccharfcn {
+ type uint16 {
+ range "0..1023";
+ }
+ description
+ "ARFCN of this cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BCCHARFCN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAN.NeighborListInUse.InterRATCell.GSM.{i}.";
+ }
+
+ grouping umts-rab-g {
+ description
+ "This object contains parameters relating to Radio Access layers {{bibref|3GPP-TS.32.405}}";
+ leaf rab-succ-estab-cs {
+ type uint64;
+ description
+ "The number of successfully established RABs (with or without queueing) for CS domain.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABSuccEstabCS";
+ }
+ leaf rab-fail-estab-cs {
+ type uint64;
+ description
+ "The number of RAB establishment failures for CS domain.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABFailEstabCS";
+ }
+ leaf rab-succ-estab-ps {
+ type uint64;
+ description
+ "The number of successfully established RABs for PS domain.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABSuccEstabPS";
+ }
+ leaf rab-fail-estab-ps {
+ type uint64;
+ description
+ "The number of RABs failed to establish for PS domain.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABFailEstabPS";
+ }
+ leaf rabcs-setup-time-mean {
+ type uint64;
+ units "milliseconds";
+ description
+ "The mean time in {{units}} for a FAP to establish a RAB CS connection. This measurement is obtained by accumulating the time intervals for each successful RAB establishment between the receipt by the FAP of a RANAP \"RAB ASSIGNMENT REQUEST\" message to establish a RAB for CS domain, and the first corresponding (based on RAB ID) transmission by the FAP of a RANAP \"RAB ASSIGNMENT RESPONSE\" message for successfully established RABs over a granularity period (Sample Interval {{bibref|3GPP-TS.32.582|Section 6.3.2}}). This end value of the time will then be divided by the number of successfully established RABs observed in the granularity period to give the arithmetic mean. The accumulator SHALL be reinitialized at the beginning of each granularity period.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABCSSetupTimeMean";
+ }
+ leaf rabcs-setup-time-max {
+ type uint64;
+ units "milliseconds";
+ description
+ "The maximum time in {{units}} for a FAP to establish a RAB CS connection. This measurement is obtained by monitoring the time intervals for each successful RAB establishment between the receipt by the FAP of a RANAP \"RAB ASSIGNMENT REQUEST\" message to establish a RAB for CS domain, and the first corresponding (based on RAB ID) transmission by the FAP of a RANAP \"RAB ASSIGNMENT RESPONSE\" message for successfully established RABs. The high tide mark of this time will be stored in a gauge; the gauge SHALL be reinitialized at the beginning of each granularity period (Sample Interval {{bibref|3GPP-TS.32.582|Section 6.3.2}}).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABCSSetupTimeMax";
+ }
+ leaf rabps-setup-time-mean {
+ type uint64;
+ units "milliseconds";
+ description
+ "The mean time in {{units}} for a FAP to establish a RAB PS connection. This measurement is obtained by accumulating the time intervals for each successful RAB establishment between the receipt by the FAP of a RANAP \"RAB ASSIGNMENT REQUEST\" message to establish a RAB for PS domain, and the first corresponding (based on RAB ID) transmission by the FAP of a RANAP \"RAB ASSIGNMENT RESPONSE\" message for successfully established RABs over a granularity period (Sample Interval {{bibref|3GPP-TS.32.582|Section 6.3.2}}). This end value of the time will then be divided by the number of successfully established RABs observed in the granularity period to give the arithmetic mean. The accumulator SHALL be reinitialized at the beginning of each granularity period.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABPSSetupTimeMean";
+ }
+ leaf rabps-setup-time-max {
+ type uint64;
+ units "milliseconds";
+ description
+ "The maximum time in {{units}} for a FAP to establish a RAB PS connection. This measurement is obtained by monitoring the time intervals for each successful RAB establishment between the receipt by the FAP of a RANAP \"RAB ASSIGNMENT REQUEST\" message to establish a RAB for PS domain, and the first corresponding (based on RAB ID) transmission by the FAP of a RANAP \"RAB ASSIGNMENT RESPONSE\" message for successfully established RABs. The high tide mark of this time will be stored in a gauge; the gauge SHALL be reinitialized at the beginning of each granularity period (Sample Interval {{bibref|3GPP-TS.32.582|Section 6.3.2}}).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.RABPSSetupTimeMax";
+ }
+ leaf fail-ho {
+ type uint64;
+ description
+ "The number of failed Handovers.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.FailHO";
+ }
+ leaf succ-ho {
+ type uint64;
+ description
+ "The number of successful Handovers.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.SuccHO";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.UMTS.RAB.";
+ }
+
+ grouping lte-g {
+ description
+ "This object contains parameters relating to configuring the LTE FAP.";
+ leaf tunnel-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.TunnelNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.";
+ }
+
+ grouping lte-tunnel-g {
+ description
+ "This object contains a table of all tunnel instances configured for the LTE FAP.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.Tunnel.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.Tunnel.{i}.Alias";
+ }
+ leaf tunnel-ref {
+ type string {
+ length "0..256";
+ }
+ description
+ "This is the reference to an IPsec tunnel instance used by the LTE FAP. For all root data models, which use the tunnel definition provided in {{bibref|TR-262}} (InternetGatewayDevice:1 {{bibref|TR-098}} and Device:1 {{bibref|TR-181i1}}) the {{param}} MUST point to a row in the 'FAP.Tunnel.IKESA.{i}.' table, defined in {{bibref|TR-262}}. If the root data model used is Device:2 {{bibref|TR-181i2}} than the {{param}} MUST point to IPsec tunnel instance defined in {{bibref|TR-181i2}}. If the referenced object is deleted, the parameter value MUST be set to an empty string. In case of a multiple-radio-technology FAP product, each radio technology can have its own tunnels or share common tunnels. In the former case, {{param}} can contain a unique instance number. In the latter case, {{param}} under all radio technologies can have the same instance number.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.Tunnel.{i}.TunnelRef";
+ }
+ leaf-list plmnid {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "{{list}} Optional list of PLMM IDs associated with the tunnel, which can be used for selecting the tunnel. Each PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.Tunnel.{i}.PLMNID";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.Tunnel.{i}.";
+ }
+
+ grouping lte-epc-g {
+ description
+ "This object contains parameters relating to configuring LTE EPC.";
+ leaf-list allowed-ciphering-algorithm-list {
+ type enumeration {
+ enum "eea0" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedCipheringAlgorithmList - EEA0";
+ }
+ enum "128-eea1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedCipheringAlgorithmList - 128-EEA1";
+ }
+ enum "128-eea2" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedCipheringAlgorithmList - 128-EEA2";
+ }
+ }
+ config false;
+ min-elements 1;
+ description
+ "{{list}} Each item is a ciphering algorithm allowed to be used for RRC and UP confidentiality protection as defined in {{bibref|3GPP-TS.33.401}}. If the list contains more than 1 item, it is in the order of the preferred algorithm to be used. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedCipheringAlgorithmList";
+ }
+ leaf-list allowed-integrity-protection-algorithm-list {
+ type enumeration {
+ enum "128-eia1" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedIntegrityProtectionAlgorithmList - 128-EIA1";
+ }
+ enum "128-eia2" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedIntegrityProtectionAlgorithmList - 128-EIA2";
+ }
+ }
+ config false;
+ min-elements 1;
+ description
+ "{{list}} Each item is a integrity protection algorithm allowed to be used for RRC as defined in {{bibref|3GPP-TS.33.401}}. If the list contains more than 1 item, it is in the order of the preferred algorithm to be used. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.AllowedIntegrityProtectionAlgorithmList";
+ }
+ leaf tac {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "TAC (Tracking Area Code) for LTE FAP as specified in SystemInformationBlockType1 message in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.TAC";
+ }
+ leaf eaid {
+ type uint32 {
+ range "0..16777216";
+ }
+ config false;
+ description
+ "Emergency Area ID that uniquely identifies the area of emergency for Earthquake and Tsunami Warning Services (ETWS). Corresponds to Emergency Area ID in {{bibref|3GPP-TS.36.413|Section 9.2.1.47}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.EAID";
+ }
+ leaf max-plmn-list-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.CellConfig.LTE.EPC.PLMNList.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.MaxPLMNListEntries";
+ }
+ leaf plmn-list-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNListNumberOfEntries";
+ }
+ leaf max-qo-s-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.EPC.QoS.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.MaxQoSEntries";
+ }
+ leaf qo-s-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoSNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.";
+ }
+
+ grouping lte-epc-plmn-list-g {
+ description
+ "This object contains parameters relating to list of PLMN identity specific to LTE EPC definition, called PLMN-IdentityList, as specified in SystemInformationBlockType1 message in {{bibref|3GPP-TS.36.331|Section 6.2.2}}. Each instance in this object is a PLMN-IdentityInfo which consists of plmn-Identity and cellReservedForOperatorUse IEs. At minimum 1 item MUST be present in this list, and maximum of 6 items.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.Alias";
+ }
+ leaf is-primary {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this {{param|PLMNID}} is a primary PLMN or not. If there is more than one instance in {{object|.CellConfig.LTE.EPC.PLMNList.{i}.}} table, then ACS MUST set this {{param}} set to {{true}} in only one instance.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.IsPrimary";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.PLMNID";
+ }
+ leaf cell-reserved-for-operator-use {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the cell is reserved for operator use or not. If {{true}}, it is reserved. If {{false}}, it is not reserved. Corresponds to \"reserved\" \"notReserved\" respectively as defined in PLMN-IdentityInfo in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.CellReservedForOperatorUse";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}.";
+ }
+
+ grouping lte-epc-qo-s-g {
+ description
+ "This object contains parameters relating to configuring QoS in LTE EPC.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.Alias";
+ }
+ leaf qci {
+ type uint8 {
+ range "1..20";
+ }
+ description
+ "QoS class identity as defined in {{bibref|3GPP-TS.23.203|Section 6.1.7.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.QCI";
+ }
+ leaf type {
+ type enumeration {
+ enum "gbr" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.Type - GBR";
+ }
+ enum "non-gbr" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.Type - Non-GBR";
+ }
+ }
+ config false;
+ description
+ "Defines the type of the QoS class as defined in {{bibref|3GPP-TS.23.203|Section 6.1.7.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.Type";
+ }
+ leaf priority {
+ type uint8 {
+ range "1..20";
+ }
+ config false;
+ description
+ "Priority of the QoS class as defined in {{bibref|3GPP-TS.23.203|Section 6.1.7.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.Priority";
+ }
+ leaf packet-delay-budget {
+ type uint16 {
+ range "50 | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1500 | 2000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Defines the Packet delay budget, specified in {{units}}, as defined in {{bibref|3GPP-TS.23.203|Section 6.1.7.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.PacketDelayBudget";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}.";
+ }
+
+ grouping lte-ran-g {
+ description
+ "This object contains parameters relating to the LTE RAN level configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.";
+ }
+
+ grouping lte-ran-common-g {
+ description
+ "This object contains parameters relating to the common configuration in LTE RAN.";
+ leaf cell-identity {
+ type uint32 {
+ range "0..268435455";
+ }
+ config false;
+ description
+ "Cell Identity as specified in {{bibref|3GPP-TS.36.331|Section 6.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Common.CellIdentity";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Common.";
+ }
+
+ grouping lte-ran-s1-ap-g {
+ description
+ "This object contains parameters relating to the S1AP configuration.";
+ leaf-list t-reloc-prep {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a maximum time for the Handover Preparation procedure in the source LTE FAP, specified in seconds, with a numeric range between 0 and 300 inclusive. Only values in multiple of 5 are valid; use of other values within the defined range MUST be rejected by the CPE. In case there is more than one item in the list, the first item contains the most preferred value. The value of {{param}} divided by 10 yields the actual value. The timer is started when the LTE FAP sends the HANDOVER REQUIRED message. Upon reception of the HANDOVER COMMAND message the LTE FAP shall stop the timer. Corresponds to parameter TS1RELOCprep defined in {{bibref|3GPP-TS.36.413|Section 8.4.1.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If the LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then the LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If the LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then the LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.S1AP.TRelocPrep";
+ }
+ leaf-list t-reloc-overall {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a maximum time for the protection of the overall handover procedure in the source LTE FAP, specified in seconds, with a numeric range between 0 and 300 inclusive. Only values in multiple of 5 are valid; use of other values within the defined range MUST be rejected by the CPE. In case there is more than one item in the list, the first item contains the most preferred value. The value of {{param}} divided by 10 yields the actual value. The timer is started reception of the HANDOVER COMMAND message. Corresponds to parameter TS1RELOCOverall defined in {{bibref|3GPP-TS.36.413|Section 8.4.1.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.S1AP.TRelocOverall";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.S1AP.";
+ }
+
+ grouping lte-ran-s1-u-g {
+ description
+ "This object contains parameters relating to the S1-U configuration.";
+ leaf gtpu-echo-interval {
+ type uint8 {
+ range "0 | 60..max";
+ }
+ units "seconds";
+ config false;
+ description
+ "Defines the interval in {{units}} between each GTP-U Echo Request that LTE FAP sends to the GTP-U peer, as specified in {{bibref|3GPP-TS.29.281|Section 7.2.1}}. If the value of {{param}} is equal to 0, then this functionality is supressed and thus LTE FAP does not send GTP-U Echo Request. If there is no GTP-U path in use, then no Echo Request is sent regardless of the value of {{param}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.S1U.GTPUEchoInterval";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.S1U.";
+ }
+
+ grouping lte-ran-rf-g {
+ description
+ "This object contains parameters relating to the RF, see {{bibref|3GPP-TS.32.592|Section 6.1.7.1}}.";
+ leaf-list earfcndl {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is an E-UTRA Absolute Radio Frequency Channel Number in the downlink direction. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter NDL specified in {{bibref|3GPP-TS.36.104|Table 5.7.3.1}}. If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.EARFCNDL";
+ }
+ leaf-list earfcnul {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is an E-UTRA Absolute Radio Frequency Channel Number in the uplink direction. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter NUL specified in {{bibref|3GPP-TS.36.104|Table 5.7.3.1}}. If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.EARFCNUL";
+ }
+ leaf freq-band-indicator {
+ type uint8 {
+ range "1..40";
+ }
+ config false;
+ description
+ "Frequency band indicator. Corresponds to parameter freqBandIndicator in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.FreqBandIndicator";
+ }
+ leaf-list dl-bandwidth {
+ type uint8 {
+ range "6 | 15 | 25 | 50 | 75 | 100";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a downlink transmission bandwidth, specified in number of Resource Blocks. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter dl_Bandwidth in MIB (Master Information Block) in {{bibref|3GPP-TS.36.331|Section 6.2.2}}. and to parameter NRB in {{bibref|3GPP-TS.36.101|Table 5.6-1}}. If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.DLBandwidth";
+ }
+ leaf-list ul-bandwidth {
+ type uint8 {
+ range "6 | 15 | 25 | 50 | 75 | 100";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is an uplink transmission bandwidth, specified in number of Resource Blocks. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter ul_Bandwidth in SIB2 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}. and to parameter NRB in {{bibref|3GPP-TS.36.101|Table 5.6-1}}. If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.ULBandwidth";
+ }
+ leaf-list reference-signal-power {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a downlink reference-signal transmit power, specified in dBm, with a numeric range between -60 and 50 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Defined as the linear average over the power contributions (in W) of all resource elements that carry cell-specific reference signals within the operating system bandwidth. Corresponds to parameter referenceSignalPower in PDSCH-Config IE in {{bibref|3GPP-TS.36.331|Section 6.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then LTE FAP accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of LTE FAP, LTE FAP accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.ReferenceSignalPower";
+ }
+ leaf-list phy-cell-id {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a physical cell ID with a numeric range between 0 and 503 inclusive. Represents the list of physical cell identities LTE FAP to choose from. In case there is more than one item in the list, the first item contains the most preferred value. As specified in {{bibref|3GPP-TS.36.211|Section 6.11}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If LTE FAP supports self-configuration capability for {{param}} and more than one item is configured, then LTE FAP is expected to select one from the list and overwrite this parameter containing only the one selected. If LTE FAP does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.PhyCellID";
+ }
+ leaf-list psch-power-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a power offset, specified in dB, of the Primary Synchronization Channel with respect to the ReferenceSignalPower, with a numeric range between -350 and 150 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of {{param}} divided by 10 yields the actual value. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.PSCHPowerOffset";
+ }
+ leaf-list ssch-power-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a power offset, specified in dB, of the Secondary Synchronization Channel with respect to the ReferenceSignalPower, with a numeric range between -350 and 150 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of {{param}} divided by 10 yields the actual value. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.SSCHPowerOffset";
+ }
+ leaf-list pbch-power-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a power offset, specified in dB, of the Physical Broadcast Channel with respect to the ReferenceSignalPower, with a numeric range between -350 and 150 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of {{param}} divided by 10 yields the actual value. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.PBCHPowerOffset";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RF.";
+ }
+
+ grouping lte-ran-phy-g {
+ description
+ "This object contains parameters relating to the physical layer level configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.";
+ }
+
+ grouping lte-ran-phy-antenna-info-g {
+ description
+ "This object contains parameters relating to the antenna configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.1}}).";
+ leaf antenna-ports-count {
+ type uint8 {
+ range "1 | 2 | 4";
+ }
+ description
+ "Defines the number of cell specific antenna ports according to {{bibref|3GPP-TS.36.211|Section 6.2.1}}. A UE in IDLE mode acquires the information about the number of transmit antenna ports according to {{bibref|3GPP-TS.36.212|Section 5.3.1.1}}. Corresponds to antennaPortsCount IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.AntennaInfo.AntennaPortsCount";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.AntennaInfo.";
+ }
+
+ grouping lte-ran-phy-pdsch-g {
+ description
+ "This object contains parameters relating to the PDSCH (Physical Downlink Shared Channel) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.2}}).";
+ leaf-list pb {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a Eb/Ea value with a numeric range between 0 and 3 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of this parameter is the same for all UEs in the cell. Eb repsents EPRE of PDSCH REs type B, i.e. REs in OFDM symbols that include reference symbols, as specified in {{bibref|3GPP-TS.36.213|Section 5.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PDSCH.Pb";
+ }
+ leaf-list pa {
+ type int64;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a Ea/Ers value. In case there is more than one item in the list, the first item contains the most preferred value. Ea represents EPRE of PDSCH REs type A, i.e. REs in OFDM symbols that do not include reference symbols. Ers represents EPRE of reference symbols REs. Specified in {{bibref|3GPP-TS.36.213|Section 5.2}}. Actual values of range are -6.00 to 3.00dB. The value of each item in {{param}} divided by 100 yields the actual value. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PDSCH.Pa";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PDSCH.";
+ }
+
+ grouping lte-ran-phy-srs-g {
+ description
+ "This object contains parameters relating to the UL SRS (Sounding Reference Signal) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.3}}).";
+ leaf srs-enabled {
+ type boolean;
+ config false;
+ description
+ "Indicates whether UL SRS (Sounding RS) is enabled or not. If {{true}}, UL Sounding RS is enabled. If {{false}}, UL Sounding RS is disabled. Corresponds to SoundingRS-UL-ConfigCommonIE defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.SRS.SRSEnabled";
+ }
+ leaf-list srs-bandwidth-config {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a index into tables of cell specific SRS Bandwidth Configuration, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. SRS Bandwidth Configuration tables are specified in {{bibref|3GPP-TS.36.211|Table 5.5.3.2-1, 5.5.3.2-2, 5.5.3.2-3 and 5.5.3.2– 4}}. Corresponds to srs-BandwidthConfig IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.SRS.SRSBandwidthConfig";
+ }
+ leaf srs-max-up-pts {
+ type boolean;
+ config false;
+ description
+ "Defines whether reconfiguration of SRS applies to UpPTS or not. If {{true}}, SRS applies to UpPTS. If {{false}}, SRS does not apply to UpPTS. Corresponds to srs-MaxUpPts specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and srsMaxUpPts specified in {{bibref|3GPP-TS.36.211|Section 5.5.3.2}}. This parameter is applicable to TDD mode only.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.SRS.SRSMaxUpPTS";
+ }
+ leaf ack-nack-srs-simultaneous-transmission {
+ type boolean;
+ config false;
+ description
+ "Defines whether a UE can simultaneously transmit SRS and HARQ ACK/NACK or not. If {{true}}, simultaneous transmission is allowed. If {{false}}, simultaneous transmission is not allowed. Corresponds to ackNackSRS-SimultaneousTransmission specfied in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and Simultaneous-AN-and-SRS specified in {{bibref|3GPP-TS.36.213|Section 8.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.SRS.AckNackSRSSimultaneousTransmission";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.SRS.";
+ }
+
+ grouping lte-ran-phy-prach-g {
+ description
+ "This object contains parameters relating to the PRACH (Physical Random Access Channel) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.4}}).";
+ leaf-list root-sequence-index {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a Logical root sequence index with a numeric range between 0 and 837 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Logical root sequence index is used to determine 64 physical RACH preamble sequences available in the cell. Corresponds to RACH_ROOT_SEQUENCE parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and {{bibref|3GPP-TS.36.211|Section 5.7.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.RootSequenceIndex";
+ }
+ leaf-list configuration-index {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is an index to the table defining PRACH resources within the frame with a numeric range between 0 and 63 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to PRACH-Configuration-Index parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and {{bibref|3GPP-TS.36.211|Section 5.7.1}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.ConfigurationIndex";
+ }
+ leaf high-speed-flag {
+ type boolean;
+ config false;
+ description
+ "Indicates whether restricted set or unrestricted set of preambles is used. If {{true}}, indicates restricted set. If {{false}}, indicates unrestricted set. Corresponds to highSpeedFlag parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and high-speed-flag parameter defined in {{bibref|3GPP-TS.36.211|Section 5.7.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.HighSpeedFlag";
+ }
+ leaf-list zero-correlation-zone-config {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a value used for preamble sequence generation with a numeric range between 0 and 15 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Each item corresponds to zeroCorrelationZoneConfig parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and to NCS parameter defined in {{bibref|3GPP-TS.36.211|Section 5.7.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.ZeroCorrelationZoneConfig";
+ }
+ leaf-list freq-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item represents the first available physical resource block number for PRACH. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to prach-FreqOffset parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and nPRBoffsetRA parameter defined {{bibref|3GPP-TS.36.211|Section 5.7.1}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.FreqOffset";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRACH.";
+ }
+
+ grouping lte-ran-phy-pucch-g {
+ description
+ "This object contains parameters relating to the PUCCH (Physical Uplink Control Channel) configuration. (see {{bibref|3GPP-TS.32.592|Section 6.1.1.5}})";
+ leaf delta-pucch-shift {
+ type enumeration {
+ enum "ds1" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.DeltaPUCCHShift - ds1";
+ }
+ enum "ds2" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.DeltaPUCCHShift - ds2";
+ }
+ enum "ds3" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.DeltaPUCCHShift - ds3";
+ }
+ }
+ config false;
+ description
+ "Defines the cyclic shift used for PUCCH formats 1/1a/1b in a resource block used for a mix of formats 1/1a/1b and 2/2a/2b. It is an integer multiple of deltaPUCCHShift within the range of {0, 1, ., 7} . Corresponds to deltaPUCCH-Shift parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and Delta-shiftPUCCH parameter defined {{bibref|3GPP-TS.36.211|Section 5.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.DeltaPUCCHShift";
+ }
+ leaf-list nrbcqi {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a value that defines the bandwidth in terms of resource blocks available for use by PUCCH formats 2/2a/2b transmission in each slot, with a numeric range between 0 and 98 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to nRB-CQI parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and NRB(2) parameter defined {{bibref|3GPP-TS.36.211|Section 5.4}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive.If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.NRBCQI";
+ }
+ leaf ncsan {
+ type uint8 {
+ range "0..7";
+ }
+ description
+ "Defines the number of cyclic shift used for PUCCH formats 1/1a/1b in a resource block used for a mix of formats 1/1a/1b and 2/2a/2b. The value is an integer multiple of deltaPUCCHShift within the range of {0, 1, ., 7}. Corresponds to nCS-AN parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and NRB(1) parameter defined {{bibref|3GPP-TS.36.211|Section 5.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.NCSAN";
+ }
+ leaf-list n1-pucchan {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a value that determines resources used for transmission of PUCCH format 1/1a/1b and 2/2a/2b, with a numeric range between 0 and 2047 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to n1PUCCH-AN parameter defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and NPUCCH(1) parameter defined {{bibref|3GPP-TS.36.213|Section 10.1}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.N1PUCCHAN";
+ }
+ leaf-list cqipucch-resource-index {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a value that indicates the position of PUCCH, with a numeric range between 0 and 1185 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. . Corresponds to the cqi-PUCCH-ResourceIndex IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}. and to parameter nPUCCH(2) specified in {{bibref|3GPP-TS.36.213|Section 7.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.CQIPUCCHResourceIndex";
+ }
+ leaf k {
+ type uint8 {
+ range "1..4";
+ }
+ units "Resource Blocks";
+ description
+ "Sub-band size for sub-band reporting mode expressed in units of physical {{units}}, see {{bibref|3GPP-TS.36.213|Section 7.2.2}}. This parameter corresponds to the K IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.K";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUCCH.";
+ }
+
+ grouping lte-ran-phy-pusch-g {
+ description
+ "This object contains parameters relating to the PUSCH (Physical Uplink Shared Channel) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.6}}).";
+ leaf nsb {
+ type uint8 {
+ range "1..4";
+ }
+ config false;
+ description
+ "Defines the number of sub-bands. This parameter corresponds to n-SB parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and NSB parameter specified in {{bibref|3GPP-TS.36.211|Section 5.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.NSB";
+ }
+ leaf hopping-mode {
+ type enumeration {
+ enum "inter-sub-frame" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.HoppingMode - InterSubFrame";
+ }
+ enum "intra-and-inter-sub-frame" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.HoppingMode - IntraAndInterSubFrame";
+ }
+ }
+ config false;
+ description
+ "Indicates if hopping is \"inter-subframe\" or \"intra and inter-subframe\". Corresponds to hoppingMode parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and Hopping-mode parameter specified in {{bibref|3GPP-TS.36.211|Section 5.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.HoppingMode";
+ }
+ leaf-list hopping-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a value to compute the set of physical resource blocks to be used for transmission on PUSCH if uplink frequency hopping mode is enabled, with a numeric range between 0 and 98 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. This parameter corresponds to pusch-HoppingOffset parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and NRBHO parameter specified in {{bibref|3GPP-TS.36.211|Section 5.3.4}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.HoppingOffset";
+ }
+ leaf enable64-qam {
+ type boolean;
+ description
+ "Indicates whether 64QAM is allowed or not. If {{true}}, 64QAM is allowed. If {{false}}, 64QAM is not allowed. Corresponds to enable64QAM parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.Enable64QAM";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.";
+ }
+
+ grouping lte-ran-phy-pusch-ulrs-g {
+ description
+ "This object contains parameters relating to the ULRS (Uplink Reference Signal) of PUSCH (Physical Uplink Shared Channel) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.6.1}}).";
+ leaf group-hopping-enabled {
+ type boolean;
+ config false;
+ description
+ "Indicates whether group hopping is enabled or not. If {{true}}, group hopping is enabled. If {{false}}, group hopping is not enabled. Corresponds to groupHoppingEnabled parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.and in {{bibref|3GPP-TS.36.211|Section 5.5.1.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.ULRS.GroupHoppingEnabled";
+ }
+ leaf group-assignment-pusch {
+ type uint8 {
+ range "0..29";
+ }
+ description
+ "Corresponds to parameter groupAssignmentPUSCH specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.ULRS.GroupAssignmentPUSCH";
+ }
+ leaf sequence-hopping-enabled {
+ type boolean;
+ config false;
+ description
+ "Indicates whether sequence hopping is enabled or not. If {{true}}, sequence hopping is enabled. If {{false}}, sequence hopping is not enabled. Corresponds to sequenceHoppingEnabled parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.and in {{bibref|3GPP-TS.36.211|Section 5.5.1.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.ULRS.SequenceHoppingEnabled";
+ }
+ leaf cyclic-shift {
+ type uint8 {
+ range "0..7";
+ }
+ description
+ "Corresponds to parameter cyclcShift specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.ULRS.CyclicShift";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PUSCH.ULRS.";
+ }
+
+ grouping lte-ran-phy-ul-power-control-g {
+ description
+ "This object contains parameters relating to the uplink power control configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.7}}).";
+ leaf-list p0-nominal-pusch {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a value to compute the UL UE transmit power for transmission on PUSCH for semi-persistant grants, with a numeric range between -126 and 24 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to p0-NominalPUSCH parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and PO_NOMINAL_PUSCH(0) parameter specified in {{bibref|3GPP-TS.36.211|Section 5.1.1.1}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.P0NominalPUSCH";
+ }
+ leaf-list alpha {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a value used to compute the UL UE transmit power for transmission on PUSCH, from the list of 0, 4, 5, 6, 7, 8, 9, 100. In case there is more than one item in the list, the first item contains the most preferred value. Actual values of range are from 0.00 to 1.00. The value of {{param}} divided by 100 yields the actual value. Corresponds to alpha parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and to α parameter specified in {{bibref|3GPP-TS.36.211|Section 5.1.1.1}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.Alpha";
+ }
+ leaf-list p0-nominal-pucch {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item is a value to compute the UL UE transmit power for transmission on PUCCH, with a numeric range between -126 and 24 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to p0-NominalPUCCH parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and PO_NOMINAL_PUCCH parameter specified in {{bibref|3GPP-TS.36.211|Section 5.1.2.1}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.P0NominalPUCCH";
+ }
+ leaf delta-fpucch-format1 {
+ type int64;
+ units "dB";
+ description
+ "Defines deltaF-PUCCH-Format1 to derive the UE transmit power. Corresponds to parameter ?F_PUCCH(1) in {{units}} as specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.213|Section 5.1.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.DeltaFPUCCHFormat1";
+ }
+ leaf delta-fpucch-format1b {
+ type uint8 {
+ range "1 | 3 | 5";
+ }
+ units "dB";
+ description
+ "Defines deltaF-PUCCH-Format1b to derive the UE transmit power. Corresponds to parameter ?F_PUCCH(1b) in {{units}} dB as specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.213|Section 5.1.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.DeltaFPUCCHFormat1b";
+ }
+ leaf delta-fpucch-format2 {
+ type int64;
+ units "dB";
+ description
+ "Defines deltaF-PUCCH-Format2 to derive the UE transmit power. Corresponds to parameter ?F_PUCCH(2) in {{units}} as specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.213|Section 5.1.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.DeltaFPUCCHFormat2";
+ }
+ leaf delta-fpucch-format2a {
+ type int64;
+ units "dB";
+ description
+ "Defines deltaF-PUCCH-Format2a to derive the UE transmit power. Corresponds to parameter ?F_PUCCH(2a) in {{units}} as specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.213|Section 5.1.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.DeltaFPUCCHFormat2a";
+ }
+ leaf delta-fpucch-format2b {
+ type int64;
+ units "dB";
+ description
+ "Defines deltaF-PUCCH-Format2b to derive the UE transmit power. Corresponds to parameter ?F_PUCCH(2b) in {{units}} as specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.213|Section 5.1.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.DeltaFPUCCHFormat2b";
+ }
+ leaf delta-preamble-msg3 {
+ type int64;
+ units "dB";
+ description
+ "Defines the parameter in {{units}} used to compute the UL UE transmit power for transmission of random access response grant. This parameter corresponds to deltaPreambleMsg3 parameter specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and to ?PREAMBLE_Msg3 parameter specified in {{bibref|3GPP-TS.36.213|Section 5.1.1.1}}. Actual value is 2x the value of this parameter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.DeltaPreambleMsg3";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.ULPowerControl.";
+ }
+
+ grouping lte-ran-phy-mbsfn-g {
+ description
+ "This object contains parameters relating to the MBSFN (Multimedia Broadcast multicast service Single Frequency Network) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.8}}).";
+ leaf neigh-cell-config {
+ type uint8 {
+ range "0..3";
+ }
+ config false;
+ description
+ "Defines the information related to MBSFN and TDD UL/DL configuration of neighbour cells. Corresponds to NeighCellConfig IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.6}}. Value 0: Not all neighbour cells have the same MBSFN sub-frame allocation as serving cell. Value 1: No MBSFN sub-frames are present in all neighbour cells. Value 2: The MBSFN sub-frame allocations of all neighbour cells are identical to or subsets of that in the serving cell. Value 3: Different UL/DL allocation in neighbouring cells for TDD compared to the serving cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.NeighCellConfig";
+ }
+ leaf max-sf-config-list-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.MaxSFConfigListEntries";
+ }
+ leaf sf-config-list-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigListNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.";
+ }
+
+ grouping lte-ran-phy-mbsfn-sf-config-list-g {
+ description
+ "This object contains parameters relating to the sub-frame that are reserved for MBSFN (Multimedia Broadcast multicast service Single Frequency Network) in downlink direction. For FDD mode, only one entry can exist in this table. For TDD mode, at most one entry can exist with a given value of stratumID (see {{bibref|3GPP-TS.32.592|Section 6.1.1.8}}).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.Alias";
+ }
+ leaf sync-stratum-id {
+ type uint8 {
+ range "1..8";
+ }
+ config false;
+ description
+ "This parameter is applicable to TDD mode only. Defines the synchronization stratum level to which the MBSFN configuration applies.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.SyncStratumID";
+ }
+ leaf radio-frame-allocation-period {
+ type uint8 {
+ range "1..2 | 4 | 8 | 16 | 32";
+ }
+ description
+ "Defines the period where MBSFN sub-frames occur in the radio frames. Radio frames contain MBSFN sub-frame when the following condition is met: ((SFN mod {{param}}) = {{param|RadioframeAllocationOffset}}). The value of 1 and 2 are only meaningful when the value of {{param|RadioFrameAllocationSize}} parameter is 1. Corresponds to radioFrameAllocationPeriod IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.RadioFrameAllocationPeriod";
+ }
+ leaf radioframe-allocation-offset {
+ type uint8 {
+ range "0..7";
+ }
+ description
+ "Defines the offset where MBSFN sub-frames occur in the radio frames. Radio frames contain MBSFN sub-frame when the following condition is met: ((SFN mod {{param|RadioFrameAllocationPeriod}}) = {{param}}). Corresponds to radioFrameAllocationOffset IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.RadioframeAllocationOffset";
+ }
+ leaf radio-frame-allocation-size {
+ type uint8 {
+ range "1 | 4";
+ }
+ description
+ "Defines the number of connsecutive frames that the MBSFN allocation pertains to defined by the combination of {{param|RadioFrameAllocationPeriod}} and {{param|RadioframeAllocationOffset}} parameters.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.RadioFrameAllocationSize";
+ }
+ leaf-list sub-frame-allocations {
+ type uint8 {
+ range "0 | 1";
+ }
+ config false;
+ max-elements "64";
+ description
+ "{{list}} The value of \"1\" indicates the position of sub-frames that is allocated to MBSFN within the radio frame. First item defines the MBSFN allocation for sub-frame #1, second item for #2, third item for #3, fourth item for #6, fifth item for #7, sixth item for #8. If the value of {{param|RadioFrameAllocationSize}} is 4, then this pattern repeats in the sequence of the four radio frames. The actual size of this parameter depends on the value of {{param|RadioFrameAllocationSize}} parameter. If the value of {{param|RadioFrameAllocationSize}} is 1, then the size of this parameter is 6; if the size {{param|RadioFrameAllocationSize}} is 4, then the size of this parameter is 24. Corresponds to subframeAllocation IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.SubFrameAllocations";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}.";
+ }
+
+ grouping lte-ran-phy-prs-g {
+ description
+ "This object contains parameters relating to the PRS (Positioning Reference Signal) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.9}}).";
+ leaf num-prs-resource-blocks {
+ type uint64;
+ units "Resource Blocks";
+ config false;
+ description
+ "Defines the number of RBs ({{units}}) used for PRS. Corresponds to the parameter NRBPRS in {{bibref|3GPP-TS.36.211|Section 6.10.4.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRS.NumPRSResourceBlocks";
+ }
+ leaf prs-configuration-index {
+ type uint16 {
+ range "0..4095";
+ }
+ config false;
+ description
+ "Corresponds to the PRS configuration index defined as parameter IPRS in {{bibref|3GPP-TS.36.211|Section 6.10.4.3 and Table 6.10.4.3.-1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRS.PRSConfigurationIndex";
+ }
+ leaf num-consecutive-prs-subfames {
+ type uint8 {
+ range "1..2 | 4 | 6";
+ }
+ config false;
+ description
+ "Defines the number of consecutive positioning sub-frames. Corresponds to the parameter NPRS in {{bibref|3GPP-TS.36.211|Section 6.10.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRS.NumConsecutivePRSSubfames";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.PRS.";
+ }
+
+ grouping lte-ran-phy-tdd-frame-g {
+ description
+ "This object is applicable to TDD mode only. This object contains parameters relating to the TDD frame structure configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.1.10}}).";
+ leaf sub-frame-assignment {
+ type uint8 {
+ range "0..6";
+ }
+ config false;
+ description
+ "Defines the DL/UL sub-frame configuration. Corresponds to subframAssignment specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and {{bibref|3GPP-TS.36.211|Table 4.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.TDDFrame.SubFrameAssignment";
+ }
+ leaf special-subframe-patterns {
+ type uint8 {
+ range "0..8";
+ }
+ config false;
+ description
+ "Defines the configuration of the special sub-frame that contains the guard period between the downlink and uplink transmissions. Corresponds to the specialSubframePatterns specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and {{bibref|3GPP-TS.36.211|Table 4.2.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.TDDFrame.SpecialSubframePatterns";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.PHY.TDDFrame.";
+ }
+
+ grouping lte-ran-mac-g {
+ description
+ "This object contains parameters relating to the MAC (Medium Access Control) configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.";
+ }
+
+ grouping lte-ran-mac-rach-g {
+ description
+ "This object contains parameters relating to the RACH (Random Access Channel) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.2.1}}).";
+ leaf-list number-of-ra-preambles {
+ type uint8 {
+ range "4..64";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a number of non-dedicated random access preambles. Only values in multiple of 4 are valid (i.e. 4, 8, 12, 16,...64); use of other values within the defined range MUST be rejected by the CPE. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter numberOfRA-Preambles specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.1}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.NumberOfRaPreambles";
+ }
+ leaf-list size-of-ra-group-a {
+ type uint8 {
+ range "4..60";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a number of non-dedicated random access preambles in Random Acces Preambles group A. Only values in multiple of 4 are valid (i.e. 4, 8, 12, 16,...60); use of other values within the defined range MUST be rejected by the CPE. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter sizeOfRA-PreamblesGroupA specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.1}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.SizeOfRaGroupA";
+ }
+ leaf-list message-size-group-a {
+ type uint16 {
+ range "56 | 144 | 208 | 256";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a threshold for preamble selection, specified in bits. In case there is more than one item in the list, the first item contains the most preferred value. Defined in {{bibref|3GPP-TS.36.321|Section 5.1.2}}. Corresponds to parameter messageSizeGroupA specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.MessageSizeGroupA";
+ }
+ leaf-list message-power-offset-group-b {
+ type int64;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a threshold for preamble selection, specified in dB. In case there is more than one item in the list, the first item contains the most preferred value. Defined in {{bibref|3GPP-TS.36.321|Section 5.1.2}}. Corresponds to parameter messagePowerOffsetGroupB specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}. Value of -1 indicates \"minusinfinity.\" If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.MessagePowerOffsetGroupB";
+ }
+ leaf-list power-ramping-step {
+ type uint8 {
+ range "0 | 2 | 4 | 6";
+ }
+ config false;
+ min-elements 1;
+ max-elements "16";
+ description
+ "{{list}} Each item is a power increase factor between subsequent random access preamble transmissions, specified in dB. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter powerRampingStep specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.PowerRampingStep";
+ }
+ leaf-list preamble-initial-received-target-power {
+ type int64;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a value used as the baseline for computation for random access transmission power, specified in dBm. Also used as a parameter in the criteria for preamble selection. Only even values are valid (i.e. -120, -118, -116,...-90); use of other values within the defined range MUST be rejected by the CPE. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter preambleInitialReceivedTargetPower specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.2}}. and section 5.1.3. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.PreambleInitialReceivedTargetPower";
+ }
+ leaf-list preamble-trans-max {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a maximum number of random access preamble transmissions, from the list of 3, 4, 5, 6, 7, 8, 10, 20, 50, 100, 200. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter preambleTransMax specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.4 and section 5.1.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.PreambleTransMax";
+ }
+ leaf-list response-window-size {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a duration of the random access response window, specified in sub-frames, with a numeric range between 2 and 10 inclusive (except value of 9). In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter ra-ResponseWindowSize specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.4}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.ResponseWindowSize";
+ }
+ leaf-list contention-resolution-timer {
+ type uint8 {
+ range "8..64";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a contention resolution timer, specified in sub-frames. Only values multiple of 8 are valid (i.e. 8, 16, 24,...64); use of other values within the defined range MUST be rejected by the CPE. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter mac-ContentionResolutionTimer specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.1.5}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.ContentionResolutionTimer";
+ }
+ leaf-list max-harq-msg3-tx {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a maximum number of Msg3 HARQ transmissions by RRC, with a numeric range between 1 and 8 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter maxHARQ-Msg3Tx specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.4.2.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.MaxHARQMsg3Tx";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.RACH.";
+ }
+
+ grouping lte-ran-mac-drx-g {
+ description
+ "This object contains parameters relating to the DRX (Discontinuous Reception) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.2.2}}).";
+ leaf drx-enabled {
+ type boolean;
+ config false;
+ description
+ "Specifies whether DRX operation is enabled or not. If {{true}}, DRX operation is enabled. If {{false}}, DRX operation is not enabled. Corresponds to drx-Configuration IE defined in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.DRXEnabled";
+ }
+ leaf-list on-duration-timer {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is the DRX cycle during which UE actively monitors PDCCH, specified in number of PDCCH sub-frames, from the list of 1, 2, 3, 4, 5, 6, 8, 10, 20, 30, 40, 50, 60, 80, 100, 200. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter onDurationTimer specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.OnDurationTimer";
+ }
+ leaf-list drx-inactivity-timer {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item defines the number of inactive consecutive PDCCH sub-frame(s) that will activate short DRX cycle, specified in number of PDCCH sub-frames, from the list of 1, 2, 3, 4, 5, 6, 8, 10, 20, 30, 40, 50, 60, 80, 100, 200, 300, 500, 750, 1280, 1920, 2560. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter drx-InactivityTimer specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.DRXInactivityTimer";
+ }
+ leaf-list drx-retransmission-timer {
+ type uint8 {
+ range "1 | 2 | 4 | 6 | 8 | 16 | 24 | 33";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item defines the maximum number of consecutive PDCCH sub-frame(s) UE MUST remain active expecting a DL retransmission, specified in number of PDCCH sub-frames. In case there is more than one item in the list, the first item contains the most preferred value. The timer is started when a HARQ RTT Timer expires and the data in the soft buffer of the corresponding HARQ process was not successfully decoded. There is one timer for each active HARQ process. Corresponds to parameter drx-RetransmissionTimer specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.7}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.DRXRetransmissionTimer";
+ }
+ leaf-list long-drx-cycle {
+ type uint16 {
+ range "10 | 20 | 32 | 40 | 64 | 80 | 128 | 160 | 256 | 320 | 512 | 640 | 1024 | 1280 | 2048 | 2560";
+ }
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is long DRX Cycle value, specified in number of sub-frames. In case there is more than one item in the list, the first item contains the most preferred value. If shortDRX-Cycle is configured, this value MUST be a multiple of the {{param|ShortDRXCycle}} value. Corresponds to longDRX-Cycle parameter specified in {{bibref|3GPP-TS.36.321|Section 5.7}} and longDRX-CycleStartOffset specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.LongDRXCycle";
+ }
+ leaf-list drx-start-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "512";
+ description
+ "{{list}} Each item defines the starting frame of the DRX cycle within the long DRX cycle, with a numeric range between 0 and 2559 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The valid value range is dependent on {{param|LongDRXCycle}} parameter which defines the upper bound of this range, i.e., range definition is [0: ({{param|LongDRXCycle}}-1)]. Corresponds to drxStartOffset parameter specified in {{bibref|3GPP-TS.36.321|Section 5.7}}. Use of values bigger than ({{param|LongDRXCycle}}-1) MUST be rejected by the CPE. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.DRXStartOffset";
+ }
+ leaf-list short-drx-cycle {
+ type uint16 {
+ range "2 | 5 | 8 | 10 | 16 | 20 | 32 | 40 | 64 | 80 | 128 | 160 | 256 | 320 | 512 | 640";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is the short DRX Cycle value, specified in number of sub-frames. In case there is more than one item in the list, the first item contains the most preferred value. If shortDRX-Cycle is configured, the value of {{param|LongDRXCycle}} MUST be a multiple of the {{param}} value. Corresponds to shortDRX-Cycle parameter specified in {{bibref|3GPP-TS.36.321|Section 5.7}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.ShortDRXCycle";
+ }
+ leaf-list drx-short-cycle-timer {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item defined the duration of the short DRX cycle in multiples of {{param|ShortDRXCycle}} parameter, specified in number of sub-frames, with a numeric range between 1 and 16 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Denotes the number of consecutive sub-frame(s)the UE shall follow the short DRX cycle after the DRX Inactivity Timer has expired. Corresponds to drxShortCycleTimer parameter specified in {{bibref|3GPP-TS.36.321|Section 5.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.DRXShortCycleTimer";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.DRX.";
+ }
+
+ grouping lte-ran-mac-ulsch-g {
+ description
+ "This object contains parameters relating to the ULSCH (Uplink Shared Channel) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.2.3}}).";
+ leaf max-harq-tx {
+ type uint8 {
+ range "1..8 | 10 | 12 | 16 | 20 | 24 | 28";
+ }
+ description
+ "Maximum number of UL HARQ transmissions. Corresponds to parameter maxHARQ-Tx specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.4.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.ULSCH.MaxHARQTx";
+ }
+ leaf periodic-bsr-timer {
+ type uint16 {
+ range "0 | 5 | 10 | 16 | 20 | 32 | 40 | 64 | 80 | 128 | 160 | 320 | 640 | 1280 | 2560";
+ }
+ units "subframes";
+ description
+ "Timer for Periodic BSR (Buffer Status Report) reporting, specified in number of {{units}}. UE transmits periodic BSR at the expiration of this timer. Corresponds to parameter periodicBSR-Timer specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.4.5}}. Value of 0 indicates \"infinity.\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.ULSCH.PeriodicBSRTimer";
+ }
+ leaf retx-bsr-timer {
+ type uint16 {
+ range "320 | 640 | 1280 | 2560 | 5120 | 10240";
+ }
+ units "subframes";
+ description
+ "Timer for Regular BSR reporting, specified in number of {{units}}. UE transmits a Regular BSR at the expiration of this timer if data is available in the buffer. Corresponds to parameter retxBSR-Timer specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.ULSCH.RetxBSRTimer";
+ }
+ leaf tti-bundling {
+ type boolean;
+ description
+ "Enables/disables TTI bundling. If {{true}}, TTI bundling is enabled. If {{false}}, TTI bundling is disabled. Corresponds to parameter ttiBundling specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.321|Section 5.4.2.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.ULSCH.TTIBundling";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.MAC.ULSCH.";
+ }
+
+ grouping lte-ran-rlc-g {
+ description
+ "This object contains parameters relating to the RLC (Radio Link Control) configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.";
+ }
+
+ grouping lte-ran-rlc-srb1-g {
+ description
+ "This object contains parameters relating to the SRB1 (Signaling Radio Bearer 1) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.3.1}}).";
+ leaf default-configuration {
+ type boolean;
+ config false;
+ description
+ "Indicates the whether default RLC configuration for SRB1 is used or not. If {{true}}, the default RLC configuration is used as specified in {{bibref|3GPP-TS.36.331|Section 9.2.1.1}}. In this case, rest of the parameters defined under the current object are ignored by the CPE. If {{false}}, rest of the parameters defined under the current object are used by the CPE for RLC configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.DefaultConfiguration";
+ }
+ leaf-list t-poll-retransmit {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a timer between successive poll transmissions, specified in milliseconds, specified in milliseconds, with a numeric range between 5 and 500 inclusive. Only the multiple of 5 are valid in the range between 5 and 250 inclusive (i.e. 5, 10, 15, 20,... 250), and only the multiple of 50 are valid in the range between 300 and 500 inclusive (i.e., 300, 350, 400, 450, 500). If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to t-PollRetransmit IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.TPollRetransmit";
+ }
+ leaf-list poll-pdu {
+ type uint16 {
+ range "0 | 4 | 8 | 16 | 32 | 64 | 128 | 256";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a counter of PDUs between successive poll transmissions, specified in the number of PDUs. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to pollPDU IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.2.1}}. Value of 0 indicates \"infinity.\" If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.PollPDU";
+ }
+ leaf-list poll-byte {
+ type uint16 {
+ range "0 | 25 | 50 | 75 | 100 | 125 | 250 | 375 | 500 | 750 | 1000 | 1250 | 1500 | 2000 | 3000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a counter of PDU bytes transmitted between successive poll transmissions, specified in kilobytes. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to pollByte IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.2.1}}. Value of 0 indicates infinite amount of kilobytes. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.PollByte";
+ }
+ leaf-list max-retx-threshold {
+ type uint8 {
+ range "1..4 | 6 | 8 | 16 | 32";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item defines the maximum number of transmission retry used by the RLC entity to limit the number of retransmissions of an AMD PDU. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to maxRetxThreshold IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.1}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.MaxRetxThreshold";
+ }
+ leaf-list t-reordering {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item defines a timer used by the receiving side of an RLC entity in order to detect loss of RLC PDUs at lower layer, specified in milliseconds, with a numeric range between 0 and 200 inclusive. Only the multiple of 5 are valid in the range between 0 and 100 inclusive (i.e. 0, 5, 10, 15,...,100), and only the multiple of 10 are valid in the range between 110 and 200 inclusive (110, 120, 130,...,200). If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to t-Reordering IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.1.2.2. and 5.1.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.TReordering";
+ }
+ leaf-list t-status-prohibit {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item defines a timer used by the receiving side of an AM RLC entity in order to prohibit transmission of a STATUS PDU, specified in milliseconds, with a numeric range between 0 and 500 inclusive. Only the multiple of 5 are valid in the range between 0 and 250 inclusive (i.e. 0, 5, 10, 15,...,250), and only the multiple of 50 are valid in the range between 300 and 500 inclusive (i.e. 300, 350, 400, 450, 500). If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to t-StatusProhibit IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.3}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.TStatusProhibit";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB1.";
+ }
+
+ grouping lte-ran-rlc-srb2-g {
+ description
+ "This object contains parameters relating to the SRB2 (Signaling Radio Bearer 2) configuration (see {{bibref|3GPP-TS.32.592|Section 6.1.3.1}}).";
+ leaf default-configuration {
+ type boolean;
+ config false;
+ description
+ "Indicates the whether default RLC configuration for SRB1 is used or not. If {{true}}, the default RLC configuration is used as specified in {{bibref|3GPP-TS.36.331|Section 9.2.1.1}}. In this case, rest of the parameters defined under the current object are ignored by the CPE. If {{false}}, rest of the parameters defined under the current object are used by the CPE for RLC configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.DefaultConfiguration";
+ }
+ leaf-list t-poll-retransmit {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a timer between successive poll transmissions, specified in milliseconds, with a numeric range between 5 and 500 inclusive. Only the multiple of 5 are valid in the range between 5 and 250 inclusive (i.e. 5, 10, 15, 20,... 250), and only the multiple of 50 are valid in the range between 300 and 500 inclusive (i.e., 300, 350, 400, 450, 500). If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to t-PollRetransmit IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.TPollRetransmit";
+ }
+ leaf-list poll-pdu {
+ type uint16 {
+ range "0 | 4 | 8 | 16 | 32 | 64 | 128 | 256";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a counter of PDUs between successive poll transmissions, specified in the number of PDUs. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to pollPDU IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.2.1}}. Value of 0 indicates \"infinity.\" If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.PollPDU";
+ }
+ leaf-list poll-byte {
+ type uint16 {
+ range "0 | 25 | 50 | 75 | 100 | 125 | 250 | 375 | 500 | 750 | 1000 | 1250 | 1500 | 2000 | 3000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a counter of PDU bytes transmitted between successive poll transmissions, specified in kilobytes. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to pollByte IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.2.1}}. Value of 0 indicates infinite amount of kilobytes. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.PollByte";
+ }
+ leaf-list max-retx-threshold {
+ type uint8 {
+ range "1..4 | 6 | 8 | 16 | 32";
+ }
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item defines the maximum number of transmission retry used by the RLC entity to limit the number of retransmissions of an AMD PDU. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to maxRetxThreshold IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.1}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.MaxRetxThreshold";
+ }
+ leaf-list t-reordering {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item defines a timer used by the receiving side of an RLC entity in order to detect loss of RLC PDUs at lower layer, specified in milliseconds, with a numeric range between 0 and 200 inclusive. Only the multiple of 5 are valid in the range between 0 and 100 inclusive (i.e. 0, 5, 10, 15,...,100), and only the multiple of 10 are valid in the range between 110 and 200 inclusive (110, 120, 130,...,200). If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to t-Reordering IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.1.2.2. and 5.1.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.TReordering";
+ }
+ leaf-list t-status-prohibit {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item defines a timer used by the receiving side of an AM RLC entity in order to prohibit transmission of a STATUS PDU, specified in milliseconds, with a numeric range between 0 and 500 inclusive. Only the multiple of 5 are valid in the range between 0 and 250 inclusive (i.e. 0, 5, 10, 15,...,250), and only the multiple of 50 are valid in the range between 300 and 500 inclusive (i.e. 300, 350, 400, 450, 500). If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. This parameter is valid only if {{param|DefaultConfiguration}} paramter under the current object is set to {{false}}. Corresponds to t-StatusProhibit IE specified in {{bibref|3GPP-TS.36.331|Section 6.3.2}} and in {{bibref|3GPP-TS.36.322|Section 5.2.3}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.TStatusProhibit";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RLC.SRB2.";
+ }
+
+ grouping lte-ran-rrc-timers-g {
+ description
+ "This object contains parameters relating to the RRC timers and constants (see {{bibref|3GPP-TS.32.592|Section 6.1.6.1}}) and (see {{bibref|3GPP-TS.32.592|Section 6.1.6.2}}).";
+ leaf-list t300 {
+ type uint16 {
+ range "100 | 200 | 300 | 400 | 600 | 1000 | 1500 | 2000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is an interval, in milliseconds, between subsequent transmissions of RRCConnectionRequest. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t300 specified in UE-TimersAndConstants IE in {{bibref|3GPP-TS.36.331|Section 6.3.6}}. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T300";
+ }
+ leaf-list t301 {
+ type uint16 {
+ range "100 | 200 | 300 | 400 | 600 | 1000 | 1500 | 2000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is an interval, in milliseconds, between subsequent transmissions of RRCConnectionReestablishmentRequest. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t301 specified in UE-TimersAndConstants IE in {{bibref|3GPP-TS.36.331|Section 6.3.6}}. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T301";
+ }
+ leaf t302 {
+ type uint16 {
+ range "100 | 200 | 300 | 400 | 600 | 1000 | 1500 | 2000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Time to wait in {{units}} for cell re-selection or RRConnectionSetup after RRCConnectionReject. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T302";
+ }
+ leaf-list t304-eutra {
+ type uint16 {
+ range "50 | 100 | 150 | 200 | 500 | 1000 | 2000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a HO failure timer, in milliseconds. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to t304 defined within IE MobilityControlInfo in RRCConnectionReconfiguration message in {{bibref|3GPP-TS.36.331|Section 5.3.5.4 and Section 6.3.4}}. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T304EUTRA";
+ }
+ leaf-list t304-irat {
+ type uint16 {
+ range "100 | 200 | 500 | 1000 | 2000 | 4000 | 8000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a HO failure timer, in milliseconds. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to t304 defined within IE CellChangeOrder in MobilityFromEUTRACommand message in {{bibref|3GPP-TS.36.331|Section 6.2.2}}. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T304IRAT";
+ }
+ leaf-list t310 {
+ type uint16 {
+ range "0 | 50 | 100 | 200 | 500 | 1000 | 2000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a RLF declaration timer, in milliseconds. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t310 specified in RLF-TimersAndConstants IE in {{bibref|3GPP-TS.36.331|Section 6.3.6}}. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T310";
+ }
+ leaf-list t311 {
+ type uint16 {
+ range "1000 | 3000 | 5000 | 10000 | 15000 | 20000 | 30000";
+ }
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a RLF recovery timer, in milliseconds. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t311 specified in RLF-TimersAndConstants IE in {{bibref|3GPP-TS.36.331|Section 6.3.6}}. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T311";
+ }
+ leaf t320 {
+ type uint8 {
+ range "5 | 10 | 20 | 30 | 60 | 120 | 180";
+ }
+ units "minutes";
+ config false;
+ description
+ "Time in {{units}} after RRCConnection Release in which cell re-selection priority info supplied in RRCConnectionRelease MUST be observed. Start/stop/expirary condition is defined in {{bibref|3GPP-TS.36.331|Section 7.3}}. Corresponds to parameter t320 specified in RRCConnectionRelease message in {{bibref|3GPP-TS.36.331|Section 6.2.2}}. S";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.T320";
+ }
+ leaf n310 {
+ type uint8 {
+ range "1..4 | 6 | 8 | 10 | 20";
+ }
+ config false;
+ description
+ "Number of consecutive \"out-of-sync\" indications received from lower layers that triggers timer T310. Corresponds to parameter n310 specified in UE-TimersAndConstants IE in {{bibref|3GPP-TS.36.331|Section 6.3.6 and Section 7.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.N310";
+ }
+ leaf n311 {
+ type uint8 {
+ range "1..6 | 8 | 10";
+ }
+ config false;
+ description
+ "Number of consecutive \"in-sync\" indications received from lower layers that stops timer T310. Corresponds to parameter n311 specified in UE-TimersAndConstants IE in {{bibref|3GPP-TS.36.331|Section 6.3.6 and Section 7.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.N311";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.RRCTimers.";
+ }
+
+ grouping lte-ran-cell-restriction-g {
+ description
+ "This object contains parameters relating to the cell restriction configuration.";
+ leaf cell-barred {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the is barred or not. If {{true}}, the cell is barred. If {{false}}, the cell is not barred. Corresponds to parameter CellBarred specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.CellBarred";
+ }
+ leaf cell-reserved-for-operator-use {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the is reserved for operator's use or not. If {{true}}, the cell is reserved for operator use. If {{false}}, the cell is not reserved for operator use. Corresponds to parameter cellReservedForOperatorUse specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.CellReservedForOperatorUse";
+ }
+ leaf barring-for-emergency {
+ type boolean;
+ config false;
+ description
+ "Indicates whether the is barred for Access Class 10 or not. If {{true}}, the cell is barred for Access Class 10. If {{false}}, the cell is not barred for Access Class 10. Corresponds to parameter ac-BarringForEmergency specified in SIB2 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.BarringForEmergency";
+ }
+ leaf x-0005b9-mo-sig-barring-factor {
+ type uint8 {
+ range "0 | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 70 | 75 | 80 | 85 | 90 | 95";
+ }
+ default "95";
+ config false;
+ description
+ "In R1.5, Data and Signalling barring factors must be identical. SystemInformationBlockType2. Other discrete values not allowed";
+ reference "BBF TR-196 2.0.3 full -Device.Services.FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.X_0005B9_MOSigBarringFactor";
+ }
+ leaf x-0005b9-mo-sig-barring-time {
+ type uint16 {
+ range "4 | 8 | 16 | 32 | 64 | 128 | 256 | 512";
+ }
+ default "4";
+ config false;
+ description
+ "In R1.5, Data and Signalling barring time are identical. In seconds. Other values not allowed.";
+ reference "BBF TR-196 2.0.3 full -Device.Services.FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.X_0005B9_MOSigBarringTime";
+ }
+ leaf x-0005b9-mo-sig-barring-for-special-ac {
+ type string {
+ length "8";
+ }
+ default "00000---";
+ config false;
+ description
+ "In R1.5, Data and Signalling special AC params are identical. Most significant 3 bits are ignored no matter the value they contain. Each of the following 5 bits can be set to '0' or '1' in any combination. '0' indicates that the specific special access class is NOT barred. ";
+ reference "BBF TR-196 2.0.3 full -Device.Services.FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.X_0005B9_MOSigBarringForSpecialAC ";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.CellRestriction.";
+ }
+
+ grouping lte-ran-mobility-g {
+ description
+ "This object contains parameters relating to the UE's mobility configuration. It covers both idle mode and connected mode.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-g {
+ description
+ "This object contains parameters relating to the UE's mobility while it is in idle mode (cell (re-)selection). Parameters under this object determines the content in the SIB (System Information Block) that is broadcast by LTE .";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-common-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration that is common to all cell re-selection scenarios (intra/inter-freq, inter-RAT to UTRA (UMTS), GERAN (GSM) and CDMA2000) (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.1}}).";
+ leaf-list qhyst {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a hysteresis value applied to serving cell for evaluating cell ranking criteria specified in dB, with a numeric range between 0 and 24 inclusive. For the value greater than 6, only even numbers are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter q-Hyst specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.Qhyst";
+ }
+ leaf q-hyst-sf-medium {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Speed-dependent scaling factor for Qhyst in Medium-mobility state, specified in {{units}}. Corresponds to parameter q-HystSF:sf-Medium specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.QHystSFMedium";
+ }
+ leaf q-hyst-sf-high {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Speed-dependent scaling factor for Qhyst in High-mobility state, specified in {{units}}. Corresponds to parameter q-HystSF:sf-High specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.QHystSFHigh";
+ }
+ leaf t-evaluation {
+ type uint8 {
+ range "30 | 60 | 120 | 180 | 240";
+ }
+ units "seconds";
+ config false;
+ description
+ "Duration for evaluating allowed amount of cell re-selection(s) required to enter mobility states, specified in {{units}}. Corresponds to parameter t-Evaluation specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.4}} and to parameter TCRmax specified in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.TEvaluation";
+ }
+ leaf t-hyst-normal {
+ type uint8 {
+ range "30 | 60 | 120 | 180 | 240";
+ }
+ units "seconds";
+ config false;
+ description
+ "Additional duration for evaluating criteria to enter normal mobility state, specified in {{units}}. Specifies the additional time period for evaluating criteria to enter Normal-mobility state. Corresponds to parameter t-HystNormal specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.4}} and to parameter TCRmaxHyst specified in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.THystNormal";
+ }
+ leaf n-cell-change-medium {
+ type uint8 {
+ range "1..16";
+ }
+ config false;
+ description
+ "Defines the number of cell re-selections within TEvaluation to enter Medium-mobility state. Corresponds to parameter n-cellChangeMedium specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.4}} and to parameter NCR_M specified in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.NCellChangeMedium";
+ }
+ leaf n-cell-change-high {
+ type uint8 {
+ range "1..16";
+ }
+ config false;
+ description
+ "Defines the number of cell re-selections within TEvaluation to enter High-mobility state. Corresponds to parameter n-cellChangeHigh specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.4}} and to parameter NCR_H specified in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.NCellChangeHigh";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.Common.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-intra-freq-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration for intra-freq re-selection scenario (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.2}}).";
+ leaf-list q-rx-lev-min-sib1 {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a required minimum received RSRP level of a E-UTRA cell for cell selection, specified in dBm, with a numeric range between -70 and -22 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter q-rxLevMin in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}} and in {{bibref|3GPP-TS.36.304|Section 5.2.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.QRxLevMinSIB1";
+ }
+ leaf-list q-rx-lev-min-sib3 {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a required minimum received RSRP level for intra-frequency E-UTRA cell re-selection, specified in dBm, with a numeric range between -70 and -22 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter q-rxLevMin in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.QRxLevMinSIB3";
+ }
+ leaf q-rx-lev-min-offset {
+ type uint8 {
+ range "1..8";
+ }
+ units "dBm";
+ config false;
+ description
+ "Defines offset with respect to QrxLevMin, specified in {{units}}. This offset is taken into account in the computation of Srxlev for cell selection evaluation of cells detected during a periodic search for a higher priority PLMN while camped normally in a VPLMN. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter q-rxLevMinOffset in SIB1 specified in {{bibref|3GPP-TS.36.331|Section 6.2.2}} and in {{bibref|3GPP-TS.36.304|Section 5.2.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.QRxLevMinOffset";
+ }
+ leaf-list s-intra-search {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a threshold for intra-frequency measurements, specified in dB, with a numeric range between 0 and 31 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter s-IntraSearch specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.SIntraSearch";
+ }
+ leaf-list t-reselection-eutra {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a cell re-selection timer for intra-frequency E-UTRA cell re-selection, specified in seconds, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t-ReselectionEUTRA specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.TReselectionEUTRA";
+ }
+ leaf-list s-non-intra-search {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a threshold for inter-frequency and inter-RAT measurements with lower or equal priority, specified in dB, with a numeric range between 0 and 31 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter s-NonIntraSearch specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.SNonIntraSearch";
+ }
+ leaf cell-reselection-priority {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Absolute priority of the E-UTRAN serving carrier frequency used in the inter-frequency and inter-RAT cell re-selection procedure. Corresponds to parameter CellReselectionPriority specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.CellReselectionPriority";
+ }
+ leaf p-max {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Used to limit the allowed UE uplink transmission power on the serving frequency, specified in {{units}}. It is used to calculate the parameter Pcompensation defined in {{bibref|3GPP-TS.36.304|Section 5.2.3.2}}. Corresponds to parameter p-Max specified in SIB1 and SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1 and Section 6.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.PMax";
+ }
+ leaf thresh-serving-low {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold for serving frequency used in evaluation of re-selection towards lower priority E-UTRAN frequency or inter-RAT, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshServingLow specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.ThreshServingLow";
+ }
+ leaf t-reselection-eutrasf-medium {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for intra-frequency TreselectionEUTRA in Medium-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionEUTRA-SF:sf-Medium specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.TReselectionEUTRASFMedium";
+ }
+ leaf t-reselection-eutrasf-high {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for intra-frequency TreselectionEUTRA in High-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionEUTRA-SF:sf-High specified in SIB3 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.TReselectionEUTRASFHigh";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IntraFreq.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-inter-freq-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration for inter-freq re-selection scenario .";
+ leaf max-carrier-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.MaxCarrierEntries";
+ }
+ leaf carrier-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.CarrierNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-inter-freq-carrier-g {
+ description
+ "This object contains parameters relating to the carrier information for inter-freq re-selection scenario (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.3}}).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.Alias";
+ }
+ leaf eutra-carrier-arfcn {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Indicates the ARFCN of this frequency carrier. Corresponds to parameter dl-CarrierFreq in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.EUTRACarrierARFCN";
+ }
+ leaf-list q-rx-lev-min-sib5 {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a required minimum received RSRP level on this E-UTRA frequency carrier, spcified in dBm, with a numeric range between -70 and -22 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter q-rxLevMin in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.3.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.QRxLevMinSIB5";
+ }
+ leaf-list q-offset-freq {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is an offset applicable between serving and this frequency carrier, specified in dBm, with a numeric range between -24 and 24 inclusive. For values less than or equal to -6, or values greater than or equal to 6, only the even values are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter q-OffsetFreq in SIB5 specified in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.4.2.6}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.QOffsetFreq";
+ }
+ leaf-list t-reselection-eutra {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a cell re-selection timer for inter-frequency cell re-selection to this E-UTRA frequency carrier, specified in seconds, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t-ReselectionEUTRA specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.TReselectionEUTRA";
+ }
+ leaf cell-reselection-priority {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Absolute priority of this E-UTRA frequency carrier, as used by the inter-frequency cell re-selection procedure. Corresponds to parameter CellReselectionPriority specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.CellReselectionPriority";
+ }
+ leaf thresh-x-high {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting from a lower priority E-UTRAN frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-High specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.ThreshXHigh";
+ }
+ leaf thresh-x-low {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting from a higher priority E-UTRAN frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-Low specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.ThreshXLow";
+ }
+ leaf p-max {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Used to limit the allowed UE uplink transmission power on this carrier frequency, specified in {{units}}. It is used to calculate the parameter Pcompensation defined in {{bibref|3GPP-TS.36.304|Section 5.2.3.2}}. Corresponds to parameter p-Max specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.PMax";
+ }
+ leaf t-reselection-eutrasf-medium {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TreselectionEUTRA for inter-frequency re-selection to this frequency carrier in Medium-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionEUTRA-SF:sf-Medium specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.TReselectionEUTRASFMedium";
+ }
+ leaf t-reselection-eutrasf-high {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TreselectionEUTRA for inter-frequency re-selection to this frequency carrier in High-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionEUTRA-SF:sf-High specified in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.TReselectionEUTRASFHigh";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection scenario.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-utra-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection, specifically for re-selection to UTRA (UMTS) scenario (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.4}}).";
+ leaf-list t-reselection-utra {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a cell re-selection timer for re-selection to a UTRA frequency carrier, specified in seconds, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t-ReselectionUTRA specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.TReselectionUTRA";
+ }
+ leaf t-reselection-utrasf-medium {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TreselectionUTRA for inter-RAT re-selection to UTRA in Medium-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionUTRA-SF:sf-Medium specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.TReselectionUTRASFMedium";
+ }
+ leaf t-reselection-utrasf-high {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TreselectionEUTRA for inter-frequency re-selection to this frequency carrier in High-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionUTRA-SF:sf-High specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.TReselectionUTRASFHigh";
+ }
+ leaf max-utranfdd-freq-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.MaxUTRANFDDFreqEntries";
+ }
+ leaf utranfdd-freq-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreqNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-utra-utranfdd-freq-g {
+ description
+ "This object contains parameters relating to the channel frequncy related information of UTRA (UMTS) system (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.5, 6.1.5.1.6}}).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.Alias";
+ }
+ leaf utra-carrier-arfcn {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "Indicates the ARFCN of the frequency carrier. Corresponds to parameter CarrierFreq in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.UTRACarrierARFCN";
+ }
+ leaf-list q-rx-lev-min {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a required minimum received RSCP level on this UTRA frequency carrier, specified in dBm, with a numeric range between -60 and -13 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2 + 1) yields the actual value. Corresponds to parameter q-RxLevMin in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.25.304|Section 5.2.3.1.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.QRxLevMin";
+ }
+ leaf-list q-qual-min {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a required minimum received Ec/Io level on this UTRA FDD carrier, specified in dB, with a numeric range between -24 and 0 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter q-QualMin in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.25.304|Section 5.2.3.1.2}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.QQualMin";
+ }
+ leaf cell-reselection-priority {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Absolute priority of this UTRA FDD frequency carrier, as used by the inter-frequency cell re-selection procedure. Corresponds to parameter CellReselectionPriority specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.CellReselectionPriority";
+ }
+ leaf thresh-x-high {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting towards a higher priority UTRA FDD frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-High specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.ThreshXHigh";
+ }
+ leaf thresh-x-low {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting towards a lower priority UTRA FDD frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-Low specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.ThreshXLow";
+ }
+ leaf p-max-utra {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Used to limit the allowed UE uplink transmission power on this UTRA FDD carrier frequency, specified in {{units}}. It is used to calculate the parameter Pcompensation defined in {{bibref|3GPP-TS.25.304|Section 5.2.3.1.2}}. Corresponds to parameter p-MaxUTRA specified in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.PMaxUTRA";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-geran-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection, specifically for re-selection to GERAN (GSM) scenario (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.6}}).";
+ leaf-list t-reselection-geran {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a cell re-selection timer for re-selection to a GERAN frequency carrier, specified in seconds, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t-ReselectionGERAN specified in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and to TreselectionGERA in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.TReselectionGERAN";
+ }
+ leaf t-reselection-geransf-medium {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TreselectionGERAN for inter-RAT re-selection to GERAN in Medium-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionGERAN-SF:sf-Medium specified in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.TReselectionGERANSFMedium";
+ }
+ leaf t-reselection-geransf-high {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TreselectionGERAN for inter-RAT re-selection to GERAN in High-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionGERAN-SF:sf-High specified in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.TReselectionGERANSFHigh";
+ }
+ leaf max-geran-freq-group-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.MaxGERANFreqGroupEntries";
+ }
+ leaf geran-freq-group-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroupNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-geran-geran-freq-group-g {
+ description
+ "This object contains parameters relating to the channel frequncy related information of GERAN (GSM) system (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.7}}).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.Alias";
+ }
+ leaf band-indicator {
+ type enumeration {
+ enum "gsm850" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.BandIndicator - GSM850";
+ }
+ enum "gsm900" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.BandIndicator - GSM900";
+ }
+ enum "dcs1800" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.BandIndicator - DCS1800";
+ }
+ enum "pcs1900" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.BandIndicator - PCS1900";
+ }
+ }
+ config false;
+ description
+ "Indicates how to interpret the BCCH ARFCN. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.BandIndicator";
+ }
+ leaf bccharfcn {
+ type uint16 {
+ range "0..1023";
+ }
+ description
+ "ARFCN of this cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.BCCHARFCN";
+ }
+ leaf-list q-rx-lev-min {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is a required minimum received RSSI level on this GERAN frequency carrier for re-selection to this UTRA FDD carrier, specified in dBm, with a numeric range between 0 and 63 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of ({{param}} * 2 - 115) yields the actual value. Corresponds to parameter q-rxLevMin in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and to RXLEV_ACCESS_MIN in {{bibref|3GPP-TS.45.008}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.QRxLevMin";
+ }
+ leaf cell-reselection-priority {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Absolute priority of this GERAN frequency group, as used by the inter-frequency cell re-selection procedure. Corresponds to parameter CellReselectionPriority specified in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.CellReselectionPriority";
+ }
+ leaf thresh-x-high {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting towards a higher priority GERAN frequency group than current serving E-UTRA frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-High specified in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.ThreshXHigh";
+ }
+ leaf thresh-x-low {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting towards a lower priority GERAN frequency group than current serving E-UTRA frequency, specified in {{units}} dB. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-Low specified in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.ThreshXLow";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-cdma2000-g {
+ description
+ "This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection, specifically for re-selection to CDMA2000 system scenario (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.8}}).";
+ leaf-list search-window-size {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a CDMA2000 parameter affecting the search for neighbouring pilots, with a numeric range between 0 and 15 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter searchWindowSize in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP2-C.S0005-A|Table 2.6.6.2.1-1}} and {{bibref|3GPP2-C.S0024-A|Table 8.7.6.2-4}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.SearchWindowSize";
+ }
+ leaf-list t-reselection-cdma2000 {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "32";
+ description
+ "{{list}} Each item is a cell re-selection timer for a CDMA2000 band, specified in seconds, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t-ReselectionCDMA2000 specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and to TreselectionCDMA_HRPD or TreselectionCDMA_1xRTT in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.TReselectionCDMA2000";
+ }
+ leaf t-reselection-cdma2000-sf-medium {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TReselectionCDMA2000 for inter-RAT re-selection to CDMA2000 in Medium-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionCDMA2000-SF:sf-Medium specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.TReselectionCDMA2000SFMedium";
+ }
+ leaf t-reselection-cdma2000-sf-high {
+ type uint8 {
+ range "25 | 50 | 75 | 100";
+ }
+ config false;
+ description
+ "Scaling factor for TReselectionCDMA2000 for inter-RAT re-selection to CDMA2000 in High-mobility state. The value of {{param}} divided by 100 yields the actual SF value. Corresponds to parameter t-ReselectionCDMA2000-SF:sf-High specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.TReselectionCDMA2000SFHigh";
+ }
+ leaf max-cdma2000-band-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.MaxCDMA2000BandEntries";
+ }
+ leaf cdma2000-band-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000BandNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.";
+ }
+
+ grouping lte-ran-mobility-idle-mode-irat-cdma2000-cdma2000-band-g {
+ description
+ "This object contains parameters relating to the channel frequncy related information of CDMA2000 system (see {{bibref|3GPP-TS.32.592|Section 6.1.5.1.8}}).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.Alias";
+ }
+ leaf band-class {
+ type uint8 {
+ range "0..17";
+ }
+ units "bandclass number";
+ description
+ "Defines the CDMA2000 band in which the CDMA2000 carrier frequency can be found, specified in {{units}}. BandClass is defined in 3GPP2 C.S0057-B Table 1.5-1. Corresponds to parameter bandClass specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.BandClass";
+ }
+ leaf cell-reselection-priority {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Absolute priority of this CDMA2000 band used by the inter-frequency cell re-selection procedure. Corresponds to parameter CellReselectionPriority specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.7}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.CellReselectionPriority";
+ }
+ leaf thresh-x-high {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting towards a higher priority CDMA2000 band than current serving E-UTRA frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-High specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.ThreshXHigh";
+ }
+ leaf thresh-x-low {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "Threshold used when re-selecting towards a lower priority CDMA2000 band than current serving E-UTRA frequency, specified in {{units}}. The value of ({{param}} * 2) yields the actual value. Corresponds to parameter threshX-Low specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}} and in {{bibref|3GPP-TS.36.304|Section 5.2.4.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.ThreshXLow";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}.";
+ }
+
+ grouping lte-ran-mobility-conn-mode-g {
+ description
+ "This object contains parameters relating to the UE's mobility while it is in connected mode (handover). Parameters under this object determines the content in the SIB (System Information Block) that is broadcast by LTE .";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.";
+ }
+
+ grouping lte-ran-mobility-conn-mode-eutra-g {
+ description
+ "This object contains parameters relating to the connected mode mobility (handover) configuration within LTE system (see {{bibref|3GPP-TS.32.592|Section 6.1.5.2.1}}).";
+ leaf-list filter-coefficient-rsrp {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a filtering coefficient used for RSRP measurements, with a numeric range between 0 and 19 inclusive. For values greater than 9, only odd values are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to filterCoefficientRSRP parameter specified in QuantityConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.FilterCoefficientRSRP";
+ }
+ leaf-list filter-coefficient-rsrq {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a filtering coefficient used for RSRQ measurements, with a numeric range between 0 and 19 inclusive. For values greater than 9, only odd values are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to filterCoefficientRSRQ parameter specified in QuantityConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.FilterCoefficientRSRQ";
+ }
+ leaf a1-threshold-rsrp {
+ type uint8 {
+ range "0..97";
+ }
+ config false;
+ description
+ "Threshold to be used in EUTRA measurement report triggering condition for event A1. Valid only if {{param|TriggerQuantity}} is {{enum|RSRP|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133|Table 9.1.4-1}}. Corresponds to parameter a1-Threshold:threshold-RSRP specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A1ThresholdRSRP";
+ }
+ leaf a1-threshold-rsrq {
+ type uint8 {
+ range "0..34";
+ }
+ config false;
+ description
+ "Threshold to be used in EUTRA measurement report triggering condition for event A1. Valid only if {{param|TriggerQuantity}} is {{enum|RSRQ|TriggerQuantity}}. Mapping to actual values is specified in 3GPP TS 36.133}} table 9.1.7-1. Corresponds to parameter a1-Threshold:threshold-RSRQ specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A1ThresholdRSRQ";
+ }
+ leaf a2-threshold-rsrp {
+ type uint8 {
+ range "0..97";
+ }
+ config false;
+ description
+ "Threshold to be used in EUTRA measurement report triggering condition for event A2. Valid only if {{param|TriggerQuantity}} is {{enum|RSRP|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133|Table 9.1.4-1}}. Corresponds to parameter a2-Threshold:threshold-RSRP specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A2ThresholdRSRP";
+ }
+ leaf a2-threshold-rsrq {
+ type uint8 {
+ range "0..34";
+ }
+ config false;
+ description
+ "Threshold to be used in EUTRA measurement report triggering condition for event A2. Valid only if {{param|TriggerQuantity}} is {{enum|RSRQ|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133|Table 9.1.7-1}}. Corresponds to parameter a2-Threshold:threshold-RSRQ specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A2ThresholdRSRQ";
+ }
+ leaf-list a3-offset {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "256";
+ description
+ "{{list}} Each item is an offset to be used in evaluation of EUTRA measurement report triggering condition for event A3, with a numeric range between -30 and 30 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a3-Offset specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A3Offset";
+ }
+ leaf report-on-leave {
+ type boolean;
+ config false;
+ description
+ "Indicates whether or not the UE shall initiate the measurement reporting procedure when the leaving condition is met for event A3 for a cell in cellsTriggeredList, as specified in {{bibref|3GPP-TS.36.331|Section 5.5.4.1 and Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.ReportOnLeave";
+ }
+ leaf a4-threshold-rsrp {
+ type uint8 {
+ range "0..97";
+ }
+ config false;
+ description
+ "Threshold to be used in EUTRA measurement report triggering condition for event A4. Valid only if {{param|TriggerQuantity}} is {{enum|RSRP|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a4-Threshold:threshold-RSRP specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A4ThresholdRSRP";
+ }
+ leaf a4-threshold-rsrq {
+ type uint8 {
+ range "0..34";
+ }
+ config false;
+ description
+ "Threshold to be used in EUTRA measurement report triggering condition for event A4. Valid only if {{param|TriggerQuantity}} is {{enum|RSRQ|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a4-Threshold:threshold-RSRQ specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A4ThresholdRSRQ";
+ }
+ leaf a5-threshold1-rsrp {
+ type uint8 {
+ range "0..97";
+ }
+ config false;
+ description
+ "Threshold1 to be used in EUTRA measurement report triggering condition for event A5. Valid only if {{param|TriggerQuantity}} is {{enum|RSRP|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a5-Threshold1:threshold-RSRP specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A5Threshold1RSRP";
+ }
+ leaf a5-threshold1-rsrq {
+ type uint8 {
+ range "0..34";
+ }
+ config false;
+ description
+ "Threshold1 to be used in EUTRA measurement report triggering condition for event A5. Valid only if {{param|TriggerQuantity}} is {{enum|RSRQ|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a5-Threshold1:threshold-RSRQ specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A5Threshold1RSRQ";
+ }
+ leaf a5-threshold2-rsrp {
+ type uint8 {
+ range "0..97";
+ }
+ config false;
+ description
+ "Threshold2 to be used in EUTRA measurement report triggering condition for event A5. Valid only if {{param|TriggerQuantity}} is {{enum|RSRP|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a5-Threshold2:threshold-RSRP specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A5Threshold2RSRP";
+ }
+ leaf a5-threshold2-rsrq {
+ type uint8 {
+ range "0..34";
+ }
+ config false;
+ description
+ "Threshold2 to be used in EUTRA measurement report triggering condition for event A5. Valid only if {{param|TriggerQuantity}} is {{enum|RSRQ|TriggerQuantity}}. Mapping to actual values is specified in {{bibref|3GPP-TS.36.133}}. Corresponds to parameter a5-Threshold2:threshold-RSRQ specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.A5Threshold2RSRQ";
+ }
+ leaf-list hysteresis {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a hysteresis value applied to entry and leave condition of a report triggering event, with a numeric range between 0 and 30 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter hysteresis specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.Hysteresis";
+ }
+ leaf-list time-to-trigger {
+ type uint16 {
+ range "0 | 40 | 64 | 80 | 100 | 128 | 160 | 256 | 320 | 480 | 512 | 640 | 1024 | 1280 | 2560 | 5120";
+ }
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a time period during which measurement report triggering condition needs to be met in order to trigger a measurement report, specified in milliseconds. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter timeToTrigger specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.TimeToTrigger";
+ }
+ leaf trigger-quantity {
+ type enumeration {
+ enum "rsrp" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.TriggerQuantity - RSRP";
+ }
+ enum "rsrq" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.TriggerQuantity - RSRQ";
+ }
+ }
+ config false;
+ description
+ "Quantities used to evaluate a measurement report triggering condition. Corresponds to parameter triggerQuantity specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.TriggerQuantity";
+ }
+ leaf report-quantity {
+ type enumeration {
+ enum "same-as-trigger-quantity" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.ReportQuantity - SameAsTriggerQuantity";
+ }
+ enum "both" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.ReportQuantity - Both";
+ }
+ }
+ config false;
+ description
+ "Measrument quantities to be included in the measurement report. Corresponds to parameter reportQuantity specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The value {{enum|Both}} specifies that both the RSRP and RSRQ quantities are to be included in the measurement report.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.ReportQuantity";
+ }
+ leaf max-report-cells {
+ type uint8 {
+ range "1..8";
+ }
+ description
+ "Maximum number of cells that can be included in a measurement report. Corresponds to parameter maxReportCells specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.MaxReportCells";
+ }
+ leaf report-interval {
+ type uint32 {
+ range "120 | 240 | 480 | 640 | 1024 | 2048 | 5120 | 10240 | 60000 | 360000 | 720000 | 1800000 | 3600000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Interval between successive measurement reports, specified in {{units}}. Corresponds to parameter reportInterval specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.ReportInterval";
+ }
+ leaf report-amount {
+ type uint8 {
+ range "0..2 | 4 | 8 | 16 | 32 | 64";
+ }
+ config false;
+ description
+ "Number of times a measurement report is sent. Corresponds to parameter reportAmount specified in ReportConfigEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. Value of 0 indicates \"infinity.\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.ReportAmount";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.EUTRA.";
+ }
+
+ grouping lte-ran-mobility-conn-mode-irat-g {
+ description
+ "This object contains parameters relating to the connected mode mobility (handover) configuration that is common to all inter-RAT handover scenarios (UTRA (UMTS), GERAN (GSM) and CDMA2000) (see {{bibref|3GPP-TS.32.592|Section 6.1.5.2.2}}).";
+ leaf-list qoffsett-utra {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a UTRA-specific offset to be applied when evaluating triggering conditions for measurement reporting in connected mode, with a numeric range between -15 and 15 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter offsetFreq included in the IE MeasObjectUTRA specified in {{bibref|3GPP-TS.36.331}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.QoffsettUTRA";
+ }
+ leaf-list filter-coefficient-utra {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a filtering coefficient used for UTRA measurements, with a numeric range between 0 and 19 inclusive. For values greater than 9, only odd values are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to filterCoefficient parameter specified in QuantityConfigUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.FilterCoefficientUTRA";
+ }
+ leaf meas-quantity-utrafdd {
+ type enumeration {
+ enum "cpich-rscp" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MeasQuantityUTRAFDD - CPICH-RSCP";
+ }
+ enum "cpich-ec-n0" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MeasQuantityUTRAFDD - CPICH-EcN0";
+ }
+ }
+ config false;
+ description
+ "Measurement quantity used for UTRA measurements. Corresponds to measQuantityUTRA-FDD parameter specified in QuantityConfigUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MeasQuantityUTRAFDD";
+ }
+ leaf b1-threshold-utrarscp {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "RSCP threshold to be used in UTRA measurement report triggering condition for event B1. Mapping to actual {{units}} values is specified in 3GPP TS 25.133}}. Corresponds to parameter b1-ThresholdUTRA:utra-RSCP specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B1ThresholdUTRARSCP";
+ }
+ leaf b1-threshold-utra-ec-n0 {
+ type uint8 {
+ range "0..49";
+ }
+ units "dBm";
+ config false;
+ description
+ "EcNo threshold to be used in UTRA measurement report triggering condition for event B1. Mapping to actual {{units}} values is specified in 3GPP TS 25.133}}. Corresponds to parameter b1-ThresholdUTRA:utra-EcNo specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B1ThresholdUTRAEcN0";
+ }
+ leaf-list qoffset-geran {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a GERAN-specific offset to be applied when evaluating triggering conditions for measurement reporting in connected mode, with a numeric range between -15 and 15 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter offsetFreq included in the IE MeasObjectGERAN specified in {{bibref|3GPP-TS.36.331}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.QoffsetGERAN";
+ }
+ leaf-list filter-coefficient-geran {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "64";
+ description
+ "{{list}} Each item is a filtering coefficient used for GERAN measurements, with a numeric range between 0 and 19 inclusive. For values greater than 9, only odd values are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to filterCoefficient parameter specified in QuantityConfigGERAN IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.FilterCoefficientGERAN";
+ }
+ leaf b1-threshold-geran {
+ type uint8 {
+ range "0..63";
+ }
+ units "dBm";
+ config false;
+ description
+ "Threshold to be used in GERAN measurement report triggering condition for event B1. Mapping to actual {{units}} values is specified in 3GPP TS 45.008}}. Corresponds to parameter b1-ThresholdGERAN specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B1ThresholdGERAN";
+ }
+ leaf-list qoffset-cdma2000 {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a CDMA2000-specific offset to be applied when evaluating triggering conditions for measurement reporting in connected mode, with a numeric range between -15 and 15 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter offsetFreq included in the IE MeasObjectCDMA2000 specified in {{bibref|3GPP-TS.36.331}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.QoffsetCDMA2000";
+ }
+ leaf meas-quantity-cdma2000 {
+ type enumeration {
+ enum "pilot-strength" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MeasQuantityCDMA2000 - PilotStrength";
+ }
+ enum "pilot-pn-phase-and-pilot-strength" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MeasQuantityCDMA2000 - PilotPnPhaseAndPilotStrength";
+ }
+ }
+ config false;
+ description
+ "Measurement quantity used for CDMA2000 measurements. Corresponds to measQuantityCDMA2000 parameter specified in QuantityConfigCDMA2000 IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MeasQuantityCDMA2000";
+ }
+ leaf b1-threshold-cdma2000 {
+ type uint8 {
+ range "0..63";
+ }
+ units "dBm";
+ config false;
+ description
+ "Threshold to be used in CDMA2000 measurement report triggering condition for event B1. Mapping to actual {{units}} values is specified in {{bibref|3GPP-TS.45.008}}. Corresponds to parameter b1-ThresholdCDMA2000 specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B1ThresholdCDMA2000";
+ }
+ leaf b2-threshold2-utrarscp {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "RSCP threshold to be used in UTRA measurement report triggering condition for event B2. Mapping to actual {{units}} values is specified in {{bibref|3GPP-TS.25.133}}. Corresponds to parameter b2-Threshold2UTRA:utra-RSCP specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B2Threshold2UTRARSCP";
+ }
+ leaf b2-threshold2-utra-ec-n0 {
+ type uint8 {
+ range "0..49";
+ }
+ units "dBm";
+ config false;
+ description
+ "EcNo threshold to be used in UTRA measurement report triggering condition for event B2. Mapping to actual {{units}} values is specified in 3GPP TS 25.133}}. Corresponds to parameter b2-Threshold2UTRA:utra-EcNo specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B2Threshold2UTRAEcN0";
+ }
+ leaf b2-threshold2-geran {
+ type uint8 {
+ range "0..63";
+ }
+ units "dBm";
+ config false;
+ description
+ "Threshold to be used in GERAN measurement report triggering condition for event B2. Mapping to actual {{units}} values is specified in 3GPP TS 45.008}}. Corresponds to parameter b2-Threshold2GERAN specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B2Threshold2GERAN";
+ }
+ leaf b2-threshold2-cdma2000 {
+ type uint8 {
+ range "0..63";
+ }
+ units "dBm";
+ config false;
+ description
+ "Threshold to be used in CDMA2000 measurement report triggering condition for event B2. Mapping to actual {{units}} values is specified in 3GPP TS 45.008}}. Corresponds to parameter b2-Threshold2CDMA2000 specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.B2Threshold2CDMA2000";
+ }
+ leaf-list hysteresis {
+ type string;
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a hysteresis value applied to entry and leave condition of an IRAT report triggering event, with a numeric range between 0 and 30 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter hysteresis specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. The multiplicity of the {{param}} values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: \"<preferred-value>,<lower-bound>..<upper-bound>\". If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.Hysteresis";
+ }
+ leaf-list time-to-trigger {
+ type uint16 {
+ range "0 | 40 | 64 | 80 | 100 | 128 | 160 | 256 | 320 | 480 | 512 | 640 | 1024 | 1280 | 2560 | 5120";
+ }
+ config false;
+ min-elements 1;
+ max-elements "128";
+ description
+ "{{list}} Each item is a time period during which IRAT measurement report triggering condition needs to be met in order to trigger IRAT measurement report, specified in milliseconds. In case there is more than one item in the list, the first item contains the most preferred value.. Corresponds to parameter timeToTrigger specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. If supports self-configuration capability for {{param}} and more than one item is configured, then is expected to select one from the list and overwrite this parameter containing only the one selected. If does not support self-configuration capability for {{param}} and more than one item is configured, then accepts the first value and ignore the rest. If only one item is configured regardless of the self-configuration capability of , accepts the value as an explicit configuration by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.TimeToTrigger";
+ }
+ leaf max-report-cells {
+ type uint8 {
+ range "1..8";
+ }
+ description
+ "Maximum number of IRAT cells that can be included in a measurement report. Corresponds to parameter maxReportCells specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.MaxReportCells";
+ }
+ leaf report-interval {
+ type uint32 {
+ range "120 | 240 | 480 | 640 | 1024 | 2048 | 5120 | 10240 | 60000 | 360000 | 720000 | 1800000 | 3600000";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Interval between successive IRAT measurement reports, specified in {{units}}. Corresponds to parameter reportInterval specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.ReportInterval";
+ }
+ leaf report-amount {
+ type uint8 {
+ range "0..2 | 4 | 8 | 16 | 32 | 64";
+ }
+ config false;
+ description
+ "Number of times an IRAT measurement report is sent. Corresponds to parameter reportAmount specified in ReportConfigInterRAT IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. Value of 0 indicates \"infinity.\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.ReportAmount";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.Mobility.ConnMode.IRAT.";
+ }
+
+ grouping lte-ran-neighbor-list-g {
+ description
+ "This object contains parameters relating to the neighbor list.";
+ leaf max-lte-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.MaxLTECellEntries";
+ }
+ leaf lte-cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECellNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.";
+ }
+
+ grouping lte-ran-neighbor-list-lte-cell-g {
+ description
+ "Table containing the E-UTRA (i.e. intra-RAT) cell list provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.MustInclude";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.PLMNID";
+ }
+ leaf cid {
+ type uint32 {
+ range "0..268435455";
+ }
+ description
+ "Cell Identity. {{bibref|3GPP-TS.36.331|Section 6.3.4}}. Combination of {{param|PLMNID}} and {{param}} constitutes the Cell Global ID (CGI).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.CID";
+ }
+ leaf eutra-carrier-arfcn {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Indicates the ARFCN of this carrier frequency. Corresponds to parameter dl-CarrierFreq in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}, and and parameter NDL in {{bibref|3GPP-TS.36.101|Section 5.7.3}}. If the value of {{param}} is the same with the one currently being used by the, then it implies that this neighbor cell is an intra-frequency cell; otherwise, it is an inter-frequency cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.EUTRACarrierARFCN";
+ }
+ leaf phy-cell-id {
+ type uint16 {
+ range "0..503";
+ }
+ config false;
+ description
+ "Physical cell ID, as specified in {{bibref|3GPP-TS.36.211|Section 6.11}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.PhyCellID";
+ }
+ leaf q-offset {
+ type int64;
+ config false;
+ description
+ "Indicate a cell-specific offset applicable to a specific neighbouring cell. It is used for evaluating the cell as a candidate for cell re-selection in idle mode. Corresponds to parameter q-OffsetCell broadcast in SIB4 for intra-frequency cells and in SIB5 for inter-frequency cells, specified in {{bibref|3GPP-TS.36.331|Section 6.3.1}}. For the value less than or equal to -8, and bigger than or equal to 8, only even numbers are valid. If the value is other than these, the CPE MUST reject the value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.QOffset";
+ }
+ leaf cio {
+ type int64;
+ config false;
+ description
+ "Cell individual offset applicable to a specific neighbouring cell. It is used for evaluating triggering conditions for measurement reporting in connected mode. Specified by cellIndividualOffset in MeasObjectEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}. For the value less than or equal to -8, and bigger than or equal to 8, only even numbers are valid. If the value is other than these, the CPE MUST reject the value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.CIO";
+ }
+ leaf rs-tx-power {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "The downlink reference-signal transmit power, specified in {{units}}. Defined as the linear average over the power contributions (in W) of all resource elements that carry cell-specific reference signals within the operating system bandwidth. Corresponds to parameter referenceSignalPower in SIB4 as a part of PDSCH-Config IE in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.RSTxPower";
+ }
+ leaf blacklisted {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this neighbor cell is allowed for UEs as handover target or not. If {{true}}, handover is prohibited towards this cell. If {{false}}, handover is allowed toward this cell. The {{param}} parameter allows this cell to be prohibited as a handover target, while still allowing this cell to be included in the BCCH SIB4 or 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.Blacklisted";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-inter-rat-cell-g {
+ description
+ "The inter-RAT cell lists separated by technology. {{bibref|3GPP-TS.36.331|Section 6.3.1 (SIB6, 7, 8)}}.";
+ leaf max-umts-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.}} table. There can be maximum of 16 UTRAN (UMTS) neighbor cells, as specified by carrierFreqListUTRA-FDD in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.MaxUMTSEntries";
+ }
+ leaf max-gsm-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.}} table. There can be maximum of 16 GERAN (GSM) neighbor cells, as specified by carrierFreqsInfoList in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.MaxGSMEntries";
+ }
+ leaf max-cdma2000-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.}} table. There can be maximum of 32 bandclasses. In each bandclass, there can be maximum of 16 CDMA2000 carrier frequencies. In each carrier, there can be maximum of 16 CDMA2000 neighbor cells (PN offset). It is specified by neighCellList in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.MaxCDMA2000Entries";
+ }
+ leaf umts-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTSNumberOfEntries";
+ }
+ leaf gsm-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSMNumberOfEntries";
+ }
+ leaf cdma2000-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000NumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.";
+ }
+
+ grouping lte-ran-neighbor-list-inter-rat-cell-umts-g {
+ description
+ "Table containing the inter-RAT cell list for UTRA (UMTS) provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.MustInclude";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.PLMNID";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "RNC-ID of an intra-RAT UMTS neighbor cell. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.RNCID";
+ }
+ leaf cid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Cell Identifier (C-id) that identifies a cell within an RNS. This Cell Identifier together with the controlling RNC (RNC-ID) constitutes the UTRAN Cell ID (UC-ID) and is used to identify a cell uniquely within UTRAN. C-ID is either 12-bit or 16-bit value. {{bibref|3GPP-TS.25.401|Section 6.1.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.CID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65533 | 65535";
+ }
+ config false;
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Routing Area Code (RAC). The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.RAC";
+ }
+ leaf ura {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "UTRAN Registration Area (URA) {{bibref|3GPP-TS.23.401}}. Indicates to the UE which {{param}} it shall use in case of overlapping URAs. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.URA";
+ }
+ leaf uarfcnul {
+ type uint16 {
+ range "0..16383";
+ }
+ config false;
+ description
+ "The UL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.UARFCNUL";
+ }
+ leaf uarfcndl {
+ type uint16 {
+ range "0..16383";
+ }
+ config false;
+ description
+ "The DL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.UARFCNDL";
+ }
+ leaf pcpich-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ config false;
+ description
+ "Primary CPICH scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.PCPICHScramblingCode";
+ }
+ leaf pcpich-tx-power {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "Primary CPICH Tx power in {{units}}. Actual values of the power are -10.0 {{units}} to 50.0 {{units}} in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the power. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 2.2.33}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.PCPICHTxPower";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-inter-rat-cell-gsm-g {
+ description
+ "Table containing the inter-RAT cell list for GERAN (GSM) provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.MustInclude";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.PLMNID";
+ }
+ leaf lac {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.LAC";
+ }
+ leaf bsic {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "BSIC of the cell per {{bibref|3GPP-TS.23.003}}, consisting of: :Bit 7:6 - not used (\"00\") :Bit 5:3 - NCC (PLMN Color Code) :Bit 2:0 - BCC (BS color code) For example, if NCC is 7 and BCC is 2 you would have 00111010 (binary) or 0x3A (hex), and the value of this parameter would be 58.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BSIC";
+ }
+ leaf ci {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Cell ID of the cell per {{bibref|3GPP-TS.23.003|Section 4.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.CI";
+ }
+ leaf band-indicator {
+ type enumeration {
+ enum "gsm850" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - GSM850";
+ }
+ enum "gsm900" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - GSM900";
+ }
+ enum "dcs1800" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - DCS1800";
+ }
+ enum "pcs1900" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator - PCS1900";
+ }
+ }
+ config false;
+ description
+ "Indicates how to interpret the BCCH ARFCN. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BandIndicator";
+ }
+ leaf bccharfcn {
+ type uint16 {
+ range "0..1023";
+ }
+ config false;
+ description
+ "ARFCN of this cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.BCCHARFCN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-inter-rat-cell-cdma2000-g {
+ description
+ "Table containing the inter-RAT cell list for CDMA2000 provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables this entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.Alias";
+ }
+ leaf must-include {
+ type boolean;
+ config false;
+ description
+ "Indicates whether this instance of the neighbor shall be included or excluded in the FAP's NL configuration.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.MustInclude";
+ }
+ leaf band-class {
+ type uint8 {
+ range "0..17";
+ }
+ config false;
+ description
+ "Defines the CDMA2000 band in which the CDMA2000 frequency carrier can be found, specified in bandclass number. BandClass is defined in {{bibref|3GPP2-C.S0057-B}} Table 1.5-1. Corresponds to parameter bandClass specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.BandClass";
+ }
+ leaf arfcn {
+ type uint16 {
+ range "0..2047";
+ }
+ config false;
+ description
+ "Defines the CDMA2000 frequency carrier within a CDMA2000 band, as specified by ARFCN-ValueCDMA2000 in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}, and {{bibref|3GPP2-C.S0002-A}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.ARFCN";
+ }
+ leaf pn-offset {
+ type uint16 {
+ range "0..511";
+ }
+ config false;
+ description
+ "Defines the PN offset that represents the \"Physical cell identity\" in CDMA2000 system, as specified by PhysCellIdCDMA2000 in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.PNOffset";
+ }
+ leaf type {
+ type enumeration {
+ enum "1x-rtt" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.Type - 1xRTT";
+ }
+ enum "hrpd" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.Type - HRPD";
+ }
+ }
+ config false;
+ description
+ "Indicates the type of the cell. This parameter determines the length of the CID parameter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.Type";
+ }
+ leaf cid {
+ type string {
+ length "0..16";
+ }
+ description
+ "Defines the global cell identity of the cell. For a 1xRTT cell, the cell identity is a binary string 47 bits long. For a HRPD cell, the cell identity is a binary string 128 bits long. The value of {{param}} parameter is interpreted as 128-bit long unsigned integer. If {{param|Type}} is {{enum|1xRTT|Type}}, the first 47 bits (6 octet) is used and the rest of this {{param}} parameter MUST be ignored by the CPE. If {{param|Type}} is {{enum|HRPD|Type}}, the entire 16 octet is used as {{param}}. Corresponds to IE CellGlobalIdCDMA2000 specified in {{bibref|3GPP-TS.36.331|Section 6.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.CID";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-in-use-g {
+ description
+ "This object contains parameters relating to the neighbor list used by the FAP based on its self-configuration capability and {{object|.CellConfig.LTE.RAN.NeighborList.}} configuration of adding and excluding cells.";
+ leaf max-lte-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.MaxLTECellEntries";
+ }
+ leaf lte-cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECellNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.";
+ }
+
+ grouping lte-ran-neighbor-list-in-use-lte-cell-g {
+ description
+ "Table containing the LTE EUTRA (i.e. intra-RAT) cell list.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.PLMNID";
+ }
+ leaf cid {
+ type uint32 {
+ range "0..268435455";
+ }
+ description
+ "Cell Identity. {{bibref|3GPP-TS.36.331|Section 6.3.4}}. Combination of {{param|PLMNID}} and {{param}} constitutes the Cell Global ID (CGI).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.CID";
+ }
+ leaf eutra-carrier-arfcn {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Indicates the ARFCN of this carrier frequency. Corresponds to parameter dl-CarrierFreq in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}, and and parameter NDL in {{bibref|3GPP-TS.36.101|Section 5.7.3}}. If the value of {{param}} is the same with the one currently being used by the, then it implies that this neighbor cell is an intra-frequency cell; otherwise, it is an inter-frequency cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.EUTRACarrierARFCN";
+ }
+ leaf phy-cell-id {
+ type uint16 {
+ range "0..503";
+ }
+ description
+ "Physical cell ID, as specified in {{bibref|3GPP-TS.36.211|Section 6.11}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.PhyCellID";
+ }
+ leaf q-offset {
+ type int64;
+ description
+ "Indicate a cell-specific offset applicable to a specific neighbouring cell. It is used for evaluating the cell as a candidate for cell re-selection in idle mode. Corresponds to parameter q-OffsetCell broadcast in SIB4 for intra-frequency cells and in SIB5 for inter-frequency cells, specified in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.QOffset";
+ }
+ leaf cio {
+ type int64;
+ description
+ "Cell individual offset applicable to a specific neighbouring cell. It is used for evaluating triggering conditions for measurement reporting in connected mode. Specified by cellIndividualOffset in MeasObjectEUTRA IE in {{bibref|3GPP-TS.36.331|Section 6.3.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.CIO";
+ }
+ leaf rs-tx-power {
+ type int64;
+ units "dBm";
+ description
+ "The downlink reference-signal transmit power, specified in {{units}}. Defined as the linear average over the power contributions (in W) of all resource elements that carry cell-specific reference signals within the operating system bandwidth. Corresponds to parameter referenceSignalPower in SIB4 as a part of PDSCH-Config IE in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.RSTxPower";
+ }
+ leaf blacklisted {
+ type boolean;
+ description
+ "Indicates whether this neighbor cell is allowed for UEs as handover target or not. If {{true}}, handover is prohibited towards this cell. If {{false}}, handover is allowed toward this cell. The {{param}} parameter allows this cell to be prohibited as a handover target, while still allowing this cell to be included in the BCCH SIB4 or 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.Blacklisted";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-in-use-inter-rat-cell-g {
+ description
+ "Table containing the inter-RAT cell lists separated by technology. {{bibref|3GPP-TS.36.331|Section 6.3.1 (SIB6, 7, 8)}}.";
+ leaf max-umts-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.}} table. There can be maximum of 16 UTRAN (UMTS) neighbor cells, as specified by carrierFreqListUTRA-FDD in SIB6 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.MaxUMTSEntries";
+ }
+ leaf max-gsm-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.}} table. There can be maximum of 16 GERAN (GSM) neighbor cells, as specified by carrierFreqsInfoList in SIB7 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.MaxGSMEntries";
+ }
+ leaf max-cdma2000-entries {
+ type uint64;
+ description
+ "The maximum number of entries in the {{object|.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.}} table. There can be maximum of 32 banclasses. In each bandclass, there can be maximum of 16 CDMA2000 carrier frequencies. In each carrier, there can be maximum of 16 CDMA2000 neighbor cells (PN offset). It is specified by neighCellList in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.MaxCDMA2000Entries";
+ }
+ leaf umts-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTSNumberOfEntries";
+ }
+ leaf gsm-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSMNumberOfEntries";
+ }
+ leaf cdma2000-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000NumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.";
+ }
+
+ grouping lte-ran-neighbor-list-in-use-inter-rat-cell-umts-g {
+ description
+ "Table containing the inter-RAT cell list for UTRA (UMTS) cell.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.PLMNID";
+ }
+ leaf rncid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "RNC-ID of an intra-RAT UMTS neighbor cell. It uniquely identifies an RNC within a PLMN. Normally, RNC-ID consists of 12 bits (i.e. a range of [0:4095]). However, if the value is larger than 4095, then Extended RNC-ID (range of [4096:65535]) is used in RANAP. The RNC-ID and Extended RNC-ID are combined into a single parameter here as there is no explicit need to have them separated. {{bibref|3GPP-TS.25.413|Section 9.2.1.39}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.RNCID";
+ }
+ leaf cid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Cell Identifier (C-id) that identifies a cell within an RNS. This Cell Identifier together with the controlling RNC (RNC-ID) constitutes the UTRAN Cell ID (UC-ID) and is used to identify a cell uniquely within UTRAN. C-ID is either 12-bit or 16-bit value. {{bibref|3GPP-TS.25.401|Section 6.1.5}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.CID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65533 | 65535";
+ }
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "Routing Area Code (RAC). The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.RAC";
+ }
+ leaf ura {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "UTRAN Registration Area (URA) {{bibref|3GPP-TS.23.401}}. Indicates to the UE which {{param}} it shall use in case of overlapping URAs. {{bibref|3GPP-TS.25.331|Section 10.3.2.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.URA";
+ }
+ leaf uarfcnul {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "The UL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.UARFCNUL";
+ }
+ leaf uarfcndl {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "The DL UTRA Absolute Radio Frequency Channel Number (UARFCN) in an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.UARFCNDL";
+ }
+ leaf pcpich-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Primary CPICH scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.PCPICHScramblingCode";
+ }
+ leaf pcpich-tx-power {
+ type int64;
+ units "dBm";
+ description
+ "Primary CPICH Tx power in {{units}}. Actual values of the power are -10.0 {{units}} to 50.0 {{units}} in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the power. {{bibref|3GPP-TS.32.642|Section 6.3.11}} {{bibref|3GPP-TS.25.433|Section 2.2.33}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.PCPICHTxPower";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.UMTS.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-in-use-inter-rat-cell-gsm-g {
+ description
+ "Table containing the inter-RAT cell list for GERAN (GSM) cell.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.PLMNID";
+ }
+ leaf lac {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Location Area Code (LAC). The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the Location Area ID (LAI). {{bibref|3GPP-TS.23.003|Section 4.1}} {{bibref|3GPP-TS.25.413|Section 9.2.3.6}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.LAC";
+ }
+ leaf bsic {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "BSIC of the cell per {{bibref|3GPP-TS.23.003}}, consisting of: :Bit 7:6 - not used (\"00\") :Bit 5:3 - NCC (PLMN Color Code) :Bit 2:0 - BCC (BS color code) For example, if NCC is 7 and BCC is 2 you would have 00111010 (binary) or 0x3A (hex), and the value of this parameter would be 58.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BSIC";
+ }
+ leaf ci {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Cell ID of the cell per {{bibref|3GPP-TS.23.003|Section 4.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.CI";
+ }
+ leaf band-indicator {
+ type enumeration {
+ enum "gsm850" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - GSM850";
+ }
+ enum "gsm900" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - GSM900";
+ }
+ enum "dcs1800" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - DCS1800";
+ }
+ enum "pcs1900" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator - PCS1900";
+ }
+ }
+ description
+ "Indicates how to interpret the BCCH ARFCN. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BandIndicator";
+ }
+ leaf bccharfcn {
+ type uint16 {
+ range "0..1023";
+ }
+ description
+ "ARFCN of this cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.BCCHARFCN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.GSM.{i}.";
+ }
+
+ grouping lte-ran-neighbor-list-in-use-inter-rat-cell-cdma2000-g {
+ description
+ "Table containing the inter-RAT cell list for CDMA2000 cell.";
+ leaf band-class {
+ type uint8 {
+ range "0..17";
+ }
+ description
+ "Defines the CDMA2000 band in which the CDMA2000 frequency carrier can be found, specified in bandclass number. BandClass is defined in {{bibref|3GPP2-C.S0057-B|Table 1.5-1}}. Corresponds to parameter bandClass specified in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.BandClass";
+ }
+ leaf arfcn {
+ type uint16 {
+ range "0..2047";
+ }
+ description
+ "Defines the CDMA2000 frequency carrier within a CDMA2000 band, as specified by ARFCN-ValueCDMA2000 in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}, and {{bibref|3GPP2-C.S0002-A}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.ARFCN";
+ }
+ leaf pn-offset {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Defines the PN offset that represents the \"Physical cell identity\" in CDMA2000 system, as specified by PhysCellIdCDMA2000 in SIB8 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.PNOffset";
+ }
+ leaf type {
+ type enumeration {
+ enum "1x-rtt" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.Type - 1xRTT";
+ }
+ enum "hrpd" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.Type - HRPD";
+ }
+ }
+ description
+ "Indicates the type of the cell. This parameter determines the length of the CID parameter.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.Type";
+ }
+ leaf cid {
+ type string {
+ length "0..16";
+ }
+ description
+ "Defines the global cell identity of the cell. For a 1xRTT cell, the cell identity is a binary string 47 bits long. For a HRPD cell, the cell identity is a binary string 128 bits long. The value of {{param}} parameter is interpreted as 128-bit long unsigned integer. If {{param|Type}} is {{enum|1xRTT|Type}}, the first 47 bits (6 octet) is used and the rest of this {{param}} parameter MUST be ignored by the CPE. If {{param|Type}} is {{enum|HRPD|Type}}, the entire 16 octet is used as {{param}}. Corresponds to IE CellGlobalIdCDMA2000 specified in {{bibref|3GPP-TS.36.331|Section 6.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.CID";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.InterRATCell.CDMA2000.{i}.";
+ }
+
+ grouping cdma2000-g {
+ description
+ "This object contains parameters relating to configuring the CDMA2000 FAP.";
+ leaf tunnel-instance {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "This is the reference to the IPsec tunnel instance used by the CDMA2000 FAP. For all root data models, which use the tunnel definition provided in {{bibref|TR-262}} (InternetGatewayDevice:1 {{bibref|TR-098}} and Device:1 {{bibref|TR-181i1}}) the {{param}} MUST point to a row in the 'FAP.Tunnel.IKESA.{i}.' table, defined in {{bibref|TR-262}}. If the root data model used is Device:2 {{bibref|TR-181i2}} than the {{param}} MUST point to IPsec tunnel instance defined in {{bibref|TR-181i2}}. If the referenced object is deleted, the parameter value MUST be set to an empty string. In case of a multiple-radio-technology FAP product, each radio technology can have its own tunnels or share common tunnels. In the former case, {{param}} can contain a unique instance number. In the latter case, {{param}} under all radio technologies can have the same instance number.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.TunnelInstance";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.";
+ }
+
+ grouping cdma2000-one-x-g {
+ description
+ "This object contains parameters relating to configuring the CDMA2000 1x FAP.";
+ leaf pcfpdsn-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSNNumberOfEntries";
+ }
+ leaf max-batch-pcfpdsn-entries {
+ type uint64;
+ description
+ "Maximum number of entries in the {{object|.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.MaxBatchPCFPDSNEntries";
+ }
+ leaf batch-pcfpdsn-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSNNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.";
+ }
+
+ grouping cdma2000-one-x-ran-g {
+ description
+ "This object contains parameters relating to RAN configuring the CDMA2000 1x FAP.";
+ leaf one-x-sector-nid {
+ type int64;
+ config false;
+ description
+ "SID for 1x. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.OneXSectorNID";
+ }
+ leaf one-x-sector-sid {
+ type int64;
+ config false;
+ description
+ "NID for 1x . See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.OneXSectorSID";
+ }
+ leaf one-xpzid {
+ type int64;
+ config false;
+ description
+ "packet Zone ID for 1x packet calls";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.OneXPZID";
+ }
+ leaf base-id {
+ type int64;
+ config false;
+ description
+ "Base station ID (needed in SPM). This is also the CellID. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.BaseID";
+ }
+ leaf max-neighbor-list-entries {
+ type uint64;
+ description
+ "Maximum number of entries avaiable in {{object|.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.MaxNeighborListEntries";
+ }
+ leaf neighbor-list-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborListNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.";
+ }
+
+ grouping cdma2000-one-x-ran-rf-g {
+ description
+ "This object contains parameters relating to RF configuration of the FAP.";
+ leaf-list rfcnfl {
+ type string {
+ length "0..256";
+ }
+ config false;
+ min-elements 1;
+ description
+ "{{list}} Each item is a pair of 2-digit Band class number (as defined in {{bibref|3GPP2-C.S0057}}) followed by 4-digit FL Radio Frequency Channel Number (RFCN). Self-configuration for RFCN is controlled by {{param|.FAPControl.CDMA2000.OneX.SelfConfig.RFCNFLSelfConfigEnable}}. If the FAP's self-configuration capability for RFCN is available and enabled, this parameter MAY contain more than one item and the FAP is expected to select one from the list for RFCNFLInUse. If the self-configuration capability is not available or not enabled, then this parameter SHOULD contain only a single item. An example value is \"010001, 030500\". If multiple items are specified, they are done in the order of preference.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.RFCNFL";
+ }
+ leaf rfcnfl-band-in-use {
+ type string {
+ length "0..16";
+ }
+ description
+ "The FL Band being used by the FAP. Self-configuration for Band and RFCN is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.RFCNFLConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.RFCNFLSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in RFCNFL. If the self-configuration capability is not available or not enabled, then this parameter contains the first band class value in RFCNFL.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.RFCNFLBandInUse";
+ }
+ leaf rfcnfl-in-use {
+ type uint64;
+ description
+ "The FL RFCN being used by the FAP. Self-configuration for RFCN is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.RFCNFLConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.RFCNFLSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in RFCNFL. If the self-configuration capability is not available or not enabled, then this parameter contains the first RFCN value in RFCNFL.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.RFCNFLInUse";
+ }
+ leaf-list pilot-pn {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "{{list}} Each item is a pilot PN offset in units of 64 PN chips. Self-configuration for pilot PN is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.PilotPNConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.PilotPNSelfConfigEnable}} from an enabled perspective. If the FAP's self-configuration capability for Pilot PN Offset is available and enabled, this parameter MAY contain more than one item and the FAP is expected to select one from the list for PilotPNInUse. If the self-configuration capability is not available or not enabled, then this parameter SHOULD contain only a single item. The multiplicity of the PN offset values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. The order of the items has no significance.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.PilotPN";
+ }
+ leaf pilot-pn-in-use {
+ type uint16 {
+ range "0..511";
+ }
+ units "64 PN chips";
+ description
+ "The Pilot PN Offset being used by the FAP in {{units}}. Self-configuration for Pilot PN Offset is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.PilotPNConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.PilotPNSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in PilotPN. If the self-configuration capability is not available or not enabled, then this parameter contains the first value in PilotPN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.PilotPNInUse";
+ }
+ leaf maxfap-tx-power {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Defines the maximum transmission power allowed on the FAP. MaxFAPTxPower is expressed as a range of allowed maximum power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<Pmax_low>;..<Pmax_high>;\". {{param}} identifies the limits between which the FAP can self-configure its maximum transmit power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.MaxFAPTxPowerConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.MaxFAPTxPowerSelfConfigEnable}} from an enabled perspective. <Pmax_low>; and <Pmax_high>; are measured in dBm and have a range of -40.0 to 20.0 incremented by 0.1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.MaxFAPTxPower";
+ }
+ leaf maxfap-tx-power-in-use {
+ type int64;
+ units "0.1 dBm";
+ description
+ "The maximum transmission power measured in {{units}} currently used by the FAP. Actual values of the maximum transmission power are -40.0 dBm to 20.0 dBm in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the maximum transmission power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.MaxFAPTxPowerConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.MaxFAPTxPowerSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the range provided in {{param|MaxFAPTxPower}}. If the self-configuration capability is not available or not enabled, then this parameter contains a value selected by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.MaxFAPTxPowerInUse";
+ }
+ leaf pch-pwr-percentage {
+ type uint32 {
+ range "1000..1000000";
+ }
+ units "0.001 percent";
+ config false;
+ description
+ "Percentage of Max Sector Power Used By Paging Channel (expressed in {{units}}). For example, 93333 means 93.333% of the max sector power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.PchPwrPercentage";
+ }
+ leaf pilot-pwr-percentage {
+ type uint32 {
+ range "1000..1000000";
+ }
+ units "0.001 percent";
+ config false;
+ description
+ "Percentage of Max Sector Power Used By Pilot Channel (expressed in {{units}}). For example, 19950 means 19.95% of total.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.PilotPwrPercentage";
+ }
+ leaf sync-pwr-percentage {
+ type uint32 {
+ range "1000..1000000";
+ }
+ units "0.001 percent";
+ config false;
+ description
+ "Percentage of Max Sector Power Used By Sync Channel (expressed in {{units}}). For example, 23458 means 23.4% of the max sector power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.SyncPwrPercentage";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.RF.";
+ }
+
+ grouping cdma2000-one-x-ran-network-listen-mode-config-g {
+ description
+ "This object contains parameters relating to self-configuration of the MaxFAPTxPower of the FAP.";
+ leaf rfcnfl-margin {
+ type uint64;
+ config false;
+ description
+ "If self-configuration of RFCNFL is enabled, this value indicates the total received signal strength margin to be applied to the entries in RFCNFL when the FAP decides on the RFCNInUse in order to bias the selection of the most preferred frequency.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.RFCNFLMargin";
+ }
+ leaf fap-coverage-target {
+ type string {
+ length "0..32";
+ }
+ config false;
+ description
+ "Defines the target value measured in dB for the range of the FAP's FL coverage, in terms of RF propagation loss. This value can be used by the FAP's selfconfiguration algorithms to help derive transmit power levels in the presence of co-channel and adjacent channel interference. {{param}} is expressed as a range of the minimum coverage path loss and the maximum coverage path loss with \"..\" (two periods) between the minimum and maximum values, i.e., \"<FAPCoverageTarget_min>..<FAPCoverageTarget_max>\". These values can be used by the FAP's selfconfiguration algorithms to help derive transmit power levels in the presence of co-channel and adjacent channel interference. <FAPCoverageTarget_min> and <FAPCoverageTarget_max> are measured in dB and have a range of [50,150] incremented by 1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.FAPCoverageTarget";
+ }
+ leaf fap-beacon-coverage-target {
+ type string {
+ length "0..32";
+ }
+ config false;
+ description
+ "Defines the target value measured in dB for the range of the FAP's FL Beacon coverage, in terms of RF propagation loss. This value can be used by the FAP's selfconfiguration algorithms to help derive beacon transmit power levels. {{param}} is expressed as a range of the minimum coverage path loss and the maximum coverage path loss with \"..\" (two periods) between the minimum and maximum values, i.e., \"<BeaconCoverageTarget_min>..<BeaconCoverageTarget_max>\". These values can be used by the FAP's selfconfiguration algorithms to help derive transmit power levels for the beacon(s) in the presence of co-channel and adjacent channel interference.\" <BeaconCoverageTarget_min> and <BeaconCoverageTarget_max> are measured in dB and have a range of [50,150] incremented by 1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.FAPBeaconCoverageTarget";
+ }
+ leaf max-coverage-edge-pilot-strength {
+ type int64;
+ units "0.1 dB";
+ config false;
+ description
+ "The maximum strength of the received pilot energy per chip, Ec, to total received spectral density, Io (signal and noise) desired for FAP users at the edge of the FAP coverage target in units of {{units}}. This value can be used by the FAP's self configuration algorithms to help prevent aggressive transmit power level settings .";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.MaxCoverageEdgePilotStrength";
+ }
+ leaf max-allowable-pilot-strength-degradation {
+ type int64;
+ units "0.1 dB";
+ config false;
+ description
+ "The maximum amount in dB by which the strength of the received pilot energy per chip, Ec, to total received spectral density, Io (signal and noise) for alien users can be degraded in the presence of FAP interference at the edge of FAP coverage, in {{units}} units.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.MaxAllowablePilotStrengthDegradation";
+ }
+ leaf-list rfcnfl-to-protect {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "{{list}} Each item is a FL RFCN corresponding to a CDMA2000 carrier that is adjacent to the RFCNFLInUse to be protected from adjacent channel interference. If any of the items in the list are adjacent to the FAP's own FL channel, the FAP MUST take the PilotStrength and total received power spectral density (Io) measured on these channels into account as part of its maximum transmit power selfconfiguration. The RFCNs in the list can belong to any operator, allowing for protection of the FAP operator's own macro layer as well as that of other operators. The list should take into account the ability of the FAP to self-configure its own FL RFCN and so SHOULD include any channels (requiring protection) which can potentially be adjacent to the RFCN selected by the FAP. For example, if only adjacent operator protection is needed and the FAP has the ability to self-configure to any channel owned by its operator, this list would be populated with the RFCNs immediately above and below the range of channels owned by the FAP operator. If an empty string then it indicates that there are no channels adjacent to the FAP that require protection, or that self-configuration of the FAP transmit power is not enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.RFCNFLToProtect";
+ }
+ leaf fap-allowed-adj-chan-coverage-hole {
+ type uint8 {
+ range "30..150";
+ }
+ units "dB";
+ config false;
+ description
+ "Defines the maximum allowed coverage hole created on carriers listed in RFCNFLToProtect by the FAP transmission, measured in {{units}}, in terms of RF propagation loss such that the {{param|MaxAllowablePilotStrengthDegradation}} is maintained outside the {{param}} for MS on that {{param|RFCNFLToProtect}}. This value can be used by the FAP's self configuration algorithms to help derive transmit power levels.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.FAPAllowedAdjChanCoverageHole";
+ }
+ leaf acir {
+ type uint64;
+ units "dB";
+ config false;
+ description
+ "AdjacentChannelInterferenceRatio value in {{units}} to be used when determining the coverage hole created on adjacent channels due to leakage.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.ACIR";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NetworkListenModeConfig.";
+ }
+
+ grouping cdma2000-one-x-ran-access-parameters-g {
+ description
+ "The object used for configuring access parameter messages for 1x. See {{bibref|3GPP2-C.S0005}}.";
+ leaf nom-pwr {
+ type int64;
+ config false;
+ description
+ "Nominal power correction factor used by the mobile in open loop power adjustment. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.NomPwr";
+ }
+ leaf init-pwr {
+ type int64;
+ config false;
+ description
+ "Initial power offset used by the mobile in open loop power adjustment. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.InitPwr";
+ }
+ leaf pwr-step-indb {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Power step increment in successive access probes. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.PwrStepIndb";
+ }
+ leaf nom-pwr-ext {
+ type uint8 {
+ range "0..1";
+ }
+ units "dBm";
+ config false;
+ description
+ "{{param}} should be zero for BC0 and BC1. For other band classes, {{param}} is 1 if Mobile's correction factor is between -24dBm and -9dBm. Otherwise {{param}} is zero. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.NomPwrExt";
+ }
+ leaf apm-auth {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Enabling/disabling global authentication. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.APMAuth";
+ }
+ leaf apm-rand-update-prd {
+ type uint16 {
+ range "16..14400";
+ }
+ units "seconds";
+ config false;
+ description
+ "The period (in {{units}}) that the BSS updates the RAND value sent via APM. Only 2 second multiples accepted.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.APMRandUpdatePrd";
+ }
+ leaf initialpwr {
+ type uint8 {
+ range "0..31";
+ }
+ units "dB";
+ config false;
+ description
+ "Initial power offset for access. The base station shall set this field to the correction factor to be used by mobile stations in the open loop power estimate for the initial transmission on an Access Channel, expressed as a two's complement value in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Initialpwr";
+ }
+ leaf pwr-step {
+ type uint8 {
+ range "0..7";
+ }
+ units "dB";
+ config false;
+ description
+ "Power increment. The base station shall set this field to the value by which mobile stations are to increase their transmit power between successive access probes in an access probe sequence, in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.PwrStep";
+ }
+ leaf num-step {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Number of access probes. The base station shall set this field to one less than the maximum number of access probes mobile stations are to transmit in a single access probe sequence.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.NumStep";
+ }
+ leaf max-cap-size {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Maximum Access Channel message capsule size. The base station shall set this field to the value in the range 0 to 7. {{param}} is set to three less than the maximum number of Access Channel frames in an Access Channel message capsule.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.MaxCapSize";
+ }
+ leaf preamble-size {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Access Channel preamble length. The base station shall set this field to one less than the number of Access Channel frames that mobile stations are to transmit in each Access Channel preamble.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.PreambleSize";
+ }
+ leaf psist09 {
+ type uint8 {
+ range "0..63";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 0 - 9. A value of 63 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist09";
+ }
+ leaf psist10 {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 10 (test Mobile). A value of 7 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist10";
+ }
+ leaf psist11 {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 11 (emergency Mobile). A value of 7 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist11";
+ }
+ leaf psist12 {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 12. A value of 7 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist12";
+ }
+ leaf psist13 {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 13. A value of 7 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist13";
+ }
+ leaf psist14 {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 14. A value of 7 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist14";
+ }
+ leaf psist15 {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence value for access probes sent by mobiles with Access Overload calls values of 15. A value of 7 indicates such mobiles are not allowed to send access probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Psist15";
+ }
+ leaf msg-psist {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence modifier for access channel attempts transmitting a message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.MsgPsist";
+ }
+ leaf reg-psist {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Persistence modifier for registration message transmission.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.RegPsist";
+ }
+ leaf probe-pn-ran {
+ type uint8 {
+ range "0..9";
+ }
+ config false;
+ description
+ "Time randomization for access channel probes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.ProbePNRan";
+ }
+ leaf acc-tmo {
+ type uint8 {
+ range "0..15";
+ }
+ units "80 ms slots";
+ config false;
+ description
+ "Access transmission timeout. Two less than the time the mobile has to wait before determining that the probe is not received by the BSS. It is in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.AccTmo";
+ }
+ leaf probe-bkoff {
+ type uint8 {
+ range "0..15";
+ }
+ units "frames";
+ config false;
+ description
+ "One less than maximum number for randomized delay between successive access probes in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.ProbeBkoff";
+ }
+ leaf bkoff {
+ type uint8 {
+ range "0..15";
+ }
+ units "80 ms slots";
+ config false;
+ description
+ "One less than maximum number for randomized delay between successive access sequences in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.Bkoff";
+ }
+ leaf max-req-seq {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Maximum number of access probe sequences for an access request.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.MaxReqSeq";
+ }
+ leaf max-rsp-seq {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Maximum number of access probe sequences for an access response";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.MaxRspSeq";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters.";
+ }
+
+ grouping cdma2000-one-x-ran-system-parameters-g {
+ description
+ "The object used for configuring system parameter messages for 1x";
+ leaf reg-zone {
+ type uint16 {
+ range "0..4095";
+ }
+ config false;
+ description
+ "registration zone number (refer to Section 2.6.5.1.5 of {{bibref|3GPP2-C.S0005}})";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.RegZone";
+ }
+ leaf total-zones {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Total number of zones the mobile shall retain for zone based registration. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.TotalZones";
+ }
+ leaf zone-timer {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "timer value to be used by the mobile in the zone registration timer. Refer to table 3.7.2.3.2.1-1 of the standard {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.ZoneTimer";
+ }
+ leaf reg-period {
+ type uint8 {
+ range "29..85";
+ }
+ config false;
+ description
+ "Registration period for timer based registration. Registration period is calculated from the formula 2^(REG_PRD/4) x 0.08 seconds. Thus a value of 59 corresponds to 1853.6 seconds (~ 1/2 hour). See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.RegPeriod";
+ }
+ leaf srch-win-a {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Search window size to be used ny the mobile for active set and candidate set. Refer to table 2.6.6.2.1-1 of {{bibref|3GPP2-C.S0005}}. For example, 11 corresponds to 130 chips";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.SrchWinA";
+ }
+ leaf srch-win-n {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Search window size to be used by the mobile for neighbor set. Refer to table 2.6.6.2.1-1 of {{bibref|3GPP2-C.S0005}}. For example, 8 corresponds to 60 chips";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.SrchWinN";
+ }
+ leaf srch-win-r {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Search window size to be used by the mobile for remaining set. Refer to table 2.6.6.2.1-1 of {{bibref|3GPP2-C.S0005}}. For example, 8 corresponds to 60 chips";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.SrchWinR";
+ }
+ leaf nghbr-max-age {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "neighbor set maximum age beyond which the mobiles are supposed to drop a neighbor. This is the count of neighbout list updat or extended neighbor list updates a mobile shall receive before removing a neighbor from the neighbor list. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.NghbrMaxAge";
+ }
+ leaf pwr-rep-thresh {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "Power control reporting threshold. Number of bad frames a mobile should receive before sending a PMRM message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.PwrRepThresh";
+ }
+ leaf pwr-rep-frames {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Duration (in number of frames) for measuring bad frames - given by equation 2^(PWR_REP_FRAMES/2) x 5 frames. For example, 6 corresponds to 40 frames. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.PwrRepFrames";
+ }
+ leaf pwr-thresh-enable {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "enable/disable power measurement report message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.PwrThreshEnable";
+ }
+ leaf pwr-period-enable {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "enable/disable periodic power measurement report message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.PwrPeriodEnable";
+ }
+ leaf pwr-rep-delay {
+ type uint8 {
+ range "0..32";
+ }
+ config false;
+ description
+ "Delay (in unit of four frames) following a PMRM before the mobile restarts counting bad frames for power control measuremnt. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.PwrRepDelay";
+ }
+ leaf rescan {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "If {{param}} is set to 1, the mobiles should restart and reinitialize the System Parameters message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.Rescan";
+ }
+ leaf tadd {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "Power threshold (in {{units}}) for transferring a neighbor from neighbor set or remaining set to active set. For example, a value of 26 corresponds to -13 dB. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.Tadd";
+ }
+ leaf tdrop {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "Drop threshold (in {{units}}) to start a handoff timer to drop a neighbor from active or candidate set. For example, 30 corresponds to -15dB. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.Tdrop";
+ }
+ leaf tcomp {
+ type uint8 {
+ range "0..15";
+ }
+ units "0.5 dB";
+ config false;
+ description
+ "If a pilot in condidate set exceeds the power of a pilot in active set by threshold, the mobile shall send a power strenght measurement report message. This threshold is defined in unit of {{units}}. For example, 5 corresponds to a threshold of 2.5 dB. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.Tcomp";
+ }
+ leaf t-tdrop {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Timer value for which an action is taken by the mobile for a neighbor in candidate set or in active set. Refer to Table 2.6.6.2.3-1 of the {{bibref|3GPP2-C.S0005}} for details. For example, 3 corresponds to four seconds";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.TTdrop";
+ }
+ leaf in-traffic-tadd {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "T-ADD value (in {{units}}) used for in-traffic system parameter message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.InTrafficTadd";
+ }
+ leaf in-traffic-tdrop {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "T-Drop value (in {{units}}) used in in-traffic system parameter message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.InTrafficTdrop";
+ }
+ leaf in-traffic-tcomp {
+ type uint8 {
+ range "0..15";
+ }
+ units "dB";
+ config false;
+ description
+ "T_Comp value (in {{units}}) used for in-traffic system parameter message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.InTrafficTcomp";
+ }
+ leaf in-traffic-ttdrop {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "T_Tdrop timer value value used for in-traffic system parameter message. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.InTrafficTtdrop";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.SystemParameters.";
+ }
+
+ grouping cdma2000-one-x-ran-extended-system-parameters-g {
+ description
+ "The object used for configuring extended system parameter messages for 1x";
+ leaf prev {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "protocol revision";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.Prev";
+ }
+ leaf p-min-rev {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "minimum protocol revision";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.PMinRev";
+ }
+ leaf delete-for-tmsi {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Delete Foreign TMSI. The base station shall set this field to '1' to cause the mobile station to delete its TMSI if the TMSI was assigned in a different TMSI zone from that specified by the TMSI_ZONE field of this message; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.DeleteForTMSI";
+ }
+ leaf use-tmsi {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Use TMSI indicator. The base station shall set this field to the value shown next field corresponding to the type of MSID that the mobile station is to use on the Access Channel.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.UseTMSI";
+ }
+ leaf pref-msid-type {
+ type uint8 {
+ range "0..3";
+ }
+ config false;
+ description
+ "Preferred Access Channel Mobile Station Identifier Type. F294. The base station shall set this field to the value shown as below corresponding to the type of MSDI that the mobile station is to use on the Access Channel. [useTMSI] [prefMSIDType] [description] 0 00 IMSI_S and ESN 0 10 IMSI 0 11 IMSI and ESN 1 10 TMSI; IMSI 1 11 TMSI; IMSI and ESN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.PrefMSIDType";
+ }
+ leaf mcc {
+ type uint16 {
+ range "0..1023";
+ }
+ config false;
+ description
+ "Mobile Country Code. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.MCC";
+ }
+ leaf imsi1112 {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "11th and 12th digits of IMSI. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.IMSI1112";
+ }
+ leaf tmsi-zone-len {
+ type uint8 {
+ range "1..8";
+ }
+ config false;
+ description
+ "TMSI zone length. The base station shall set this field to the number of octets included in the TMSI_ZONE. The base station shall set this field to a value in the range 1 to 8 inclusive.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.TMSIZoneLen";
+ }
+ leaf tmsi-zone {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "TMSI zone. The base station shall set this field to the TMSI zone number as specified in {{bibref|3GPP2-N.S0010}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.TMSIZone";
+ }
+ leaf bcast-index {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Broadcast slot cycle index. To enable periodic broadcast paging, the base station shall set this field to and unsigned 3-bit number in the range 1-7, equal to the broadcast slot cycle index. To disable periodic broadcast paging, the base station shall set this field to '000'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.BcastIndex";
+ }
+ leaf imsit-supported {
+ type int64;
+ config false;
+ description
+ "1: IMISI_T is supported, 0: IMSI_T is not supported. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.IMSITSupported";
+ }
+ leaf soft-slope {
+ type uint8 {
+ range "0..63";
+ }
+ config false;
+ description
+ "The slope in the inequality criterion for adding a pilot to the Active Set, or dropping a pilot from the Active Set. The base station shall set this field as an unsigned binary number.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.SoftSlope";
+ }
+ leaf add-intercept {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "The intercept in the inequality criterion for adding a pilot to the Active Set. The base station shall set this field as a two's complement signed binary number, in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AddIntercept";
+ }
+ leaf drop-intercept {
+ type uint8 {
+ range "0..63";
+ }
+ units "dB";
+ config false;
+ description
+ "The intercept in the inequality criterion for dropping a pilot from the Active Set. The base station shall set this field as a two's complement signed binary number, in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.DropIntercept";
+ }
+ leaf max-num-alt-so {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Maximum number of alternative service options. The base station shall set this field to the maximum number of alternative service option numbers that the mobile station is allowed to include in the Origination Message or the Page Response Message. For mobile stations with MOB_P_REVs less than seven, the alternative service options are those service options defined in TSB-58B and related to SERVICE_OPTION in Origination Message and the Page Response Message. For mobile stations with MOB_P_REVs equal to or greater than seven, the alternative service options are those service options defined in TSB-58B without service group number assigned and related to SERVICE_OPTION in Origination Message and the Page Response Message. The base station sets this field to a value greater than zero, in addition, the base station shall allow the mobile station with MOB_P_REVs equal to or greater than 7 to include - a 4 or 8-bit service option bitmap in the Origination Message and the Page Response Message; - alternative service option numbers, not limited to MAX_ALT_SO_NUM, in the Enhanced Origination Message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.MaxNumAltSo";
+ }
+ leaf reselected-included {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "System reselection parameters included. If the base station is including system reselection parameters, the base station shall set this field to '1'; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.ReselectedIncluded";
+ }
+ leaf ec-thresh {
+ type uint64;
+ units "dBm";
+ config false;
+ description
+ "Pilot power threshold. If RESELECTINCLUDED is set to '1', the base station shall include the field EC_THRESH and set this field to: [ (pilot_power_threshold + 115 ) ] where pilot_power_threshold is the pilot power, Ec, in {{units}}/1.23 MHz, below which the mobile station is to perform system reselection; otherwise, the base station shall omit this field.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.EcThresh";
+ }
+ leaf ec-io-thresh {
+ type uint64;
+ config false;
+ description
+ "Pilot Ec / Io threshold. If RESELECTINCLUDED is set to '1', the base station shall include the field EC_I0_THRESH and set this field to: [ - 20 x log10 (pilot_threshold) ] where pilot_threshold is the pilot Ec/Io below which the mobile station is to perform system reselection; otherwise, the base station shall omit this field.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.EcIoThresh";
+ }
+ leaf pilot-report {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Pilot reporting indicator. The base station shall set this field to '1' if the mobile station is to report the additional pilots which have pilot strength exceeding T_ADD in all Access Channel messages. The base station shall set this field to '0' if the mobile station is to report the additional pilots which have pilot strengths exceeding T_ADD only in the Origination Message and the Page Response Message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.PilotReport";
+ }
+ leaf nghbr-set-entry-info {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Neighbor Set access entry handoff information included indicator. If the base station is including information on the Neighbor Set access entry handoff, the base station shall set this field to '1'; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.NghbrSetEntryInfo";
+ }
+ leaf access-ho-order {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Access entry handoff permitted indicator. If NghbrSetEntryInfo is set to '1', the base station shall set this field to '1' if the mobile station is permitted to perform an access entry handoff after receiving a message while performing the Mobile Station Order and Message Processing Operation in the Mobile Station Idle State; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AccessHOOrder";
+ }
+ leaf nghbr-set-access-info {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Neighbor Set access handoff included indicator. If the base station is including information on the Neighbor Set access handoff or access probe handoff, the base station shall set this field to '1', otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.NghbrSetAccessInfo";
+ }
+ leaf access-ho {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Access handoff permitted indicator. If NghbrSetEntryInfo is set to '1', the base station shall set this field to '1' if the mobile station is permitted to perform an access handoff; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AccessHO";
+ }
+ leaf access-ho-msg-rsp {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Access handoff permitted for message response indicator. If AccessHO is set to '1', the base station shall include this field and set it as described below; otherwise, the base station shall omit this field. The base station shall set this field to '1' if the mobile station is permitted to perform an access handoff after receiving a message and before responding to that message in the System Access State; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AccessHOMsgRsp";
+ }
+ leaf access-probe-ho {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Access probe handoff permitted indicator. If NghbrSetEntryInfo is set to '1', the base station shall set this field to '1' if the base station is permitted to perform an access probe handoff; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AccessProbeHO";
+ }
+ leaf acc-ho-list-upd {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Access handoff list update permitted indicator. If AccessProbeHO is included and is set to '1', the base station shall set this field to '1' if the mobile station is permitted to update the access handoff list during an access attempt; otherwise, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AccHOListUpd";
+ }
+ leaf acc-probe-ho-other-msg {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Access probe handoff permitted for messages other than the Origination Message and the Page Response Message. If AccessProbeHO is set to '1', the base station shall set this field to '1' if the mobile station is permitted to perform an access probe handoff for messages other than the Origination Message and the Page Response. The base station shall set this field to '0' if the mobile station is permitted to perform an access probe handoff only for the Origination Message and the Page Response Message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.AccProbeHOOtherMsg";
+ }
+ leaf max-num-probe-ho {
+ type uint8 {
+ range "0..3";
+ }
+ config false;
+ description
+ "Maximum number of times that mobile station is permitted to perform an access probe handoff. If AccessProbeHO is set to '1', the base station shall set this field to the maximum number of times the mobile station is allowed to perform an access probe handoff within an access attempt minus one.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.MaxNumProbeHO";
+ }
+ leaf brdcast-gps-assit {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "If {{param}} is set to 1, then Braodcast GPS assist is supported. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.BrdcastGPSAssit";
+ }
+ leaf qpch-supported {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Quick Paging Channel Supported Indication. If the base station supports Quick Paging Channel operation, the base station shall set this field to '1'; otherwise the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.QPCHSupported";
+ }
+ leaf num-qpch {
+ type uint8 {
+ range "1..3";
+ }
+ config false;
+ description
+ "Number of Quick Paging Channels. If the base station sets QPCHSUPPORTED to '1', the base station shall include this field and set it as described below; otherwise, the base station shall omit this field. The base station shall set this field to the number of Quick Paging Channels on this CDMA Channel. The base station shall not set this field to '00'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.NumQPCH";
+ }
+ leaf qpch-rate {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Quick Paging Channel indicator rate. See {{bibref|3GPP2-C.S0005}}. {{param}} is set as follows: 0: 4800bps; 1: 9600bps.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.QPCHRate";
+ }
+ leaf qpch-pwr-level-page {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Quick Paging Channel paging indicator transmit power level. {{param}} is set as follows: 0: 5 dB below; 1: 4 dB below; 2: 3 dB below; 3: 2 dB below; 4: 1 dB below; 5: Same; 6: 1 dB above; 7: 2dB above.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.QPCHPwrLevelPage";
+ }
+ leaf qpc-hcci-supported {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Quick Paging Channel configuration change indicator supported. {{param}} is set as follows: if the base station is to support configuration change indicators on the Quick Paging Channel, {{param}} to '1'; otherwise {{param}} is set to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.QPCHcciSupported";
+ }
+ leaf qpch-pwr-level-config {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Quick Paging Channel configuration change indicator CONFIG transmit power level. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.QPCHPwrLevelConfig";
+ }
+ leaf sdb-supported {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Short Data Burst supported indicator. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.SDBSupported";
+ }
+ leaf r-lgain-traffic-pilot {
+ type uint8 {
+ range "0..63";
+ }
+ units "0.125 dB";
+ config false;
+ description
+ "Gain adjustment of the Reverse Traffic Channel relative to the Reverse Pilot Channel for Radio Configurations greater than 2. {{param}} is set to the correction factor to be used by mobile stations in setting the power of a reverse traffic channel, expressed as a two's complement value in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.RLgainTrafficPilot";
+ }
+ leaf rvs-pwr-ctrl-delay-incl {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Reverse Power Control Delay included indicator. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.RvsPwrCtrlDelayIncl";
+ }
+ leaf rvs-pwr-ctrl-delay {
+ type uint8 {
+ range "0..3";
+ }
+ units "1.25 ms";
+ config false;
+ description
+ "The reverse power control delay. {{param}} is setto the closed-loop reverse power control delay minus one (the closed-loop reverse power control delay is the time between the end of a gated-on reverse PCG and the beginning of the Forward Power Control Subchannel in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.RvsPwrCtrlDelay";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ExtendedSystemParameters.";
+ }
+
+ grouping cdma2000-one-x-ran-forward-pwr-ctr-g {
+ description
+ "The object used for configuring extended channel assignment messages for 1x";
+ leaf fpcfch-init-setpt {
+ type int64;
+ units "0.125 dB";
+ config false;
+ description
+ "Initial Fundamental Channel outer loop Eb/Nt setpoint in {{units}}. For example, 56 corresponds to 7 dB. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.FPCFCHInitSetpt";
+ }
+ leaf fpc-subchan-gain {
+ type int64;
+ units "0.25 dB";
+ config false;
+ description
+ "Forward power control subchannel relative to fwd traffic channel in {{units}}. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.FPCSubchanGain";
+ }
+ leaf rl-gain-adj {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Reverse Traffic Channel power relative to access power in {{units}}. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.RLGainAdj";
+ }
+ leaf fpcfchfer {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "Fundamental Channel target frame error rate. Refer to table 3.7.3.3.2.25-2 of {{bibref|3GPP2-C.S0005}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.FPCFCHFER";
+ }
+ leaf fpcfch-min-setpt {
+ type int64;
+ units "0.125 dB";
+ config false;
+ description
+ "Minimum Fundamental Channel Outer Loop Eb/Nt setpoint in {{units}}. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.FPCFCHMinSetpt";
+ }
+ leaf fpcfch-max-setpt {
+ type int64;
+ units "0.125 dB";
+ config false;
+ description
+ "Maximum Fundamental Channel Outer Loop Eb/Nt setpoint in {{units}}. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.FPCFCHMaxSetpt";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.ForwardPwrCtr.";
+ }
+
+ grouping cdma2000-one-x-ran-hard-handoff-g {
+ description
+ "This object provides configurable parameters for 1x Handout";
+ leaf handout-enable {
+ type boolean;
+ config false;
+ description
+ "Enabling handout operation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.HandoutEnable";
+ }
+ leaf ho-pilot-power-thresh {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "Pilot power threshold (in {{units}} relative to the FAP pilot power) for handout declaration";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.HOPilotPowerThresh";
+ }
+ leaf ho-pilot-duration {
+ type uint8 {
+ range "20..50";
+ }
+ units "100ms";
+ config false;
+ description
+ "Timethreshold for handout declaration (in {{units}})";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.HOPilotDuration";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.";
+ }
+
+ grouping cdma2000-one-x-ran-hard-handoff-stats-g {
+ description
+ "This object contains statistics for all Handouts of the 1x FAP.";
+ leaf tx-ho-required {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of Handout Required messages sent to the MSC";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.TxHORequired";
+ }
+ leaf rx-ho-command {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of Handout Command messegaes received from the MSC";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.RxHOCommand";
+ }
+ leaf ho-required-rejected {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of HO required requests rejected by the MSC";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.HORequiredRejected";
+ }
+ leaf ho-required-unanswered {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of HO required requests for which no response received from the MSC";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.HORequiredUnanswered";
+ }
+ leaf tx-uhdm {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number UHDMs sent to mobiles";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.TxUHDM";
+ }
+ leaf rx-ns-ack {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of MSAcks received from the mobile in response to UHDM";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.RxNSAck";
+ }
+ leaf ho-failure-count {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of Handout attempts declared as failure";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.HOFailureCount";
+ }
+ leaf call-drop-count {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total numer of call drops after a HO attempt. RTC lost without MSack";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.CallDropCount";
+ }
+ leaf tx-ho-commence {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Number of Handout Commenced messages sent to MSC";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.TxHOCommence";
+ }
+ leaf rx-ho-session-clear {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Number of session clear commands received form the core";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.RxHOSessionClear";
+ }
+ leaf return-on-failure-count {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of times a Return On Handoff failure was declared";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.ReturnOnFailureCount";
+ }
+ leaf one-pilot-report-count {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Number of times only one pilot was reported in HO Required message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.OnePilotReportCount";
+ }
+ leaf two-pilot-report-count {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Number of times only two pilot was reported in HO Required message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.TwoPilotReportCount";
+ }
+ leaf three-pilot-report-count {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Number of times only three pilot was reported in HO Required message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.ThreePilotReportCount";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.HardHandoff.Stats.";
+ }
+
+ grouping cdma2000-one-x-ran-power-control-g {
+ description
+ "Configuration Managed Object for OTA power control attribute.";
+ leaf one-xpcfpc-incl {
+ type int64;
+ config false;
+ description
+ "Whether Forward power control information included in Power Control message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCFPCIncl";
+ }
+ leaf one-xpcfpcfch-min-setpt {
+ type int64;
+ units "0.125 dB";
+ config false;
+ description
+ "The value for the minimum Fundamental Channel Outer Loop Eb/Nt setpoint, in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCFPCFCHMinSetpt";
+ }
+ leaf one-xpcfpcfch-max-setpt {
+ type int64;
+ units "0.125 dB";
+ config false;
+ description
+ "The value for the maximum Fundamental Channel Outer Loop Eb/Nt setpoint, in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCFPCFCHMaxSetpt";
+ }
+ leaf one-xpcrpc-incl {
+ type int64;
+ config false;
+ description
+ "Whether reverse Power control information included in the Power Control Message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCRPCIncl";
+ }
+ leaf one-xpcfch-chan-adj-gain {
+ type int64;
+ units "0.125 dB";
+ config false;
+ description
+ "Channel adjustment gain (in {{units}}) for Reverse Fundamental Channel.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCFCHChanAdjGain";
+ }
+ leaf one-xpc-pwr-rep-thresh {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "The number of bad frames to be received in a measurement period on the channel which carries the Power Control Subchannel before mobile stations are to generate a Power easurement Report Message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCPwrRepThresh";
+ }
+ leaf one-xpc-pwr-rep-frames {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "Power control reporting frame count. Number of frames over which the mobile station measures frame errors. For example, 7 corresponds to 55 frames. Refer to {{bibref|3GPP2-C.S0005}} for mapping between this value and the actual frame count.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCPwrRepFrames";
+ }
+ leaf one-x-pwr-thresh-enable {
+ type int64;
+ config false;
+ description
+ "Threshold report mode indicator. If the mobile station is to generate threshold Power Measurement Report Messages, the base station shall set this field to '1'. If the mobile station is not to generate threshold Power Measurement Report Messages, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPwrThreshEnable";
+ }
+ leaf one-xpc-pwr-period-enable {
+ type int64;
+ config false;
+ description
+ "Periodic report mode indicator. If the mobile station is to generate periodic Power Measurement Report Messages, the base station shall set this field to '1'. If the mobile station is not to generate periodic Power Measurement Report Messages, the base station shall set this field to '0'.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCPwrPeriodEnable";
+ }
+ leaf one-xpc-pwr-rep-delay {
+ type uint8 {
+ range "0..31";
+ }
+ units "4 frames";
+ config false;
+ description
+ "Power report delay. The period that the mobile station waits following a Power Measurement Report Message before restarting frame counting for power control purposes. The base station shall set this field to the power report delay values in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.OneXPCPwrRepDelay";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.PowerControl.";
+ }
+
+ grouping cdma2000-one-x-ran-neighbor-list-g {
+ description
+ "This object contains information common to all neighbors of a sector. This object has only one instance.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.Alias";
+ }
+ leaf pilot-inc {
+ type int64;
+ config false;
+ description
+ "pilot increment policy for this network. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.PilotInc";
+ }
+ leaf one-x-neighbor-index {
+ type int64;
+ description
+ "Macro neighbour index. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.OneXNeighborIndex";
+ }
+ leaf neighbor-config {
+ type enumeration {
+ enum "same-config" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborConfig - SameConfig";
+ }
+ enum "same-paging" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborConfig - SamePaging";
+ }
+ enum "diff-paging" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborConfig - DiffPaging";
+ }
+ enum "unknown" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborConfig - Unknown";
+ }
+ }
+ config false;
+ description
+ "Neighbor configuration in terms of number of frequencies having paging channels as defined in Section 3.7.2.3.2 of the {{bibref|3GPP2-C.S0005}} standard";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborConfig";
+ }
+ leaf neighbor-pn {
+ type int64;
+ description
+ "PN offset of the neighbor. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborPN";
+ }
+ leaf search-priority {
+ type enumeration {
+ enum "low" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.SearchPriority - Low";
+ }
+ enum "medium" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.SearchPriority - Medium";
+ }
+ enum "high" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.SearchPriority - High";
+ }
+ enum "very-high" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.SearchPriority - VeryHigh";
+ }
+ }
+ config false;
+ description
+ "priority level for serching this neighbor. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.SearchPriority";
+ }
+ leaf neighbor-band {
+ type enumeration {
+ enum "0" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 0";
+ }
+ enum "1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 1";
+ }
+ enum "2" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 2";
+ }
+ enum "3" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 3";
+ }
+ enum "4" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 4";
+ }
+ enum "5" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 5";
+ }
+ enum "6" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand - 6";
+ }
+ }
+ config false;
+ description
+ "Neighbor band class. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborBand";
+ }
+ leaf neighbor-frequency {
+ type int64;
+ config false;
+ description
+ "frequency of neighbor. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.NeighborFrequency";
+ }
+ leaf frequency-included {
+ type int64;
+ config false;
+ description
+ "Flag to indicate if the channel id included. See {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.FrequencyIncluded";
+ }
+ leaf in-traffic {
+ type int64;
+ config false;
+ description
+ "whether this neighbor can be used for in-traffic neighborlist message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.InTraffic";
+ }
+ leaf overhead-msg {
+ type int64;
+ config false;
+ description
+ "whether this neighbor can be used for overhead neighborlist message";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.OverheadMsg";
+ }
+ leaf base-identifier {
+ type int64;
+ config false;
+ description
+ "unique identifire of the neighboring cell (optional)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.BaseIdentifier";
+ }
+ leaf air-interface {
+ type enumeration {
+ enum "one-x" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.AirInterface - OneX";
+ }
+ enum "is95" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.AirInterface - IS95";
+ }
+ enum "hrpd" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.AirInterface - HRPD";
+ }
+ enum "other" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.AirInterface - Other";
+ }
+ }
+ config false;
+ description
+ "Air interface technology of the neighbor.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.AirInterface";
+ }
+ leaf hand-out-capable {
+ type int64;
+ config false;
+ description
+ "Flag to indicate if the handOutCapability is possible.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.HandOutCapable";
+ }
+ leaf one-x-neighbor-longitude {
+ type string {
+ length "0..16";
+ }
+ config false;
+ description
+ "Longitude for this neighbor. Parameter is a string representing a floating point real number (+/- XXX.YY). Where + for East, - for West, XXX.Y ranges between 0.0 and 180.0 .";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.OneXNeighborLongitude";
+ }
+ leaf one-x-neighbor-latitude {
+ type string {
+ length "0..16";
+ }
+ config false;
+ description
+ "Lattitude for this neighbor. Parameter is a string representing a floating point number (+/-XX.Y). + for North, - for South, XX.Y ranges between 0.0 and 90.0.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.OneXNeighborLatitude";
+ }
+ leaf one-x-neighbor-msc-id {
+ type uint32 {
+ range "0..16777215";
+ }
+ config false;
+ description
+ "IOS MSCID of the neighbors. See {{bibref|3GPP2-A.S0014}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.OneXNeighborMSCId";
+ }
+ leaf one-x-neighbor-ios-cell-id {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Cell Identifier of the neighbor (formatted according to Cell Identification Discriminator = '0000 0010', i.e., 12-bit cell value and 4-bit sector value). See {{bibref|3GPP2-A.S0014}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.OneXNeighborIOSCellId";
+ }
+ leaf force-in-overhead {
+ type boolean;
+ config false;
+ description
+ "If {{param}} is set to {{true}}, the FAP SHOULD include this Neighbor List entry in the Neighbor List overhead messages (see {{bibref|3GPP2-C.S0005}}. Otherwise, {{param}} is set to {{false}}, in which case the FAP MAY include this Neighbor List entry in the Neighbor List overhead messages.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.ForceInOverhead";
+ }
+ leaf included-in-overhead {
+ type boolean;
+ description
+ "If {{param}} is set to {{true}}, the FAP is currently including this Neighbor List entry in the Neighbor List overhead messages (see {{bibref|3GPP2-C.S0005}}. Otherwise, {{param}} is set to {{false}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.IncludedInOverhead";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}.";
+ }
+
+ grouping cdma2000-one-x-ran-apidm-g {
+ description
+ "This object can be configured only if {{param|.Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable}} is set to {{true}}.";
+ leaf association-type {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "The FAP shall set this field to the value shown in {{bibref|3GPP2-C.S0005}} corresponding to the configuration of the base station.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.AssociationType";
+ }
+ leaf apidlen {
+ type uint8 {
+ range "0..15";
+ }
+ config false;
+ description
+ "The FAP shall set this field to the length of the access point identification in units of 16 bits. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.APIDLEN";
+ }
+ leaf apid {
+ type binary {
+ length "0..16";
+ }
+ config false;
+ description
+ "Access Point Identification. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.APID";
+ }
+ leaf apidmask {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Access Point identification Mask. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.APIDMASK";
+ }
+ leaf iosmscid {
+ type uint32 {
+ range "0..16777215";
+ }
+ config false;
+ description
+ "MSC_ID of the base station. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.IOSMSCID";
+ }
+ leaf ioscellid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "CELL_ID of the base station. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.IOSCELLID";
+ }
+ leaf intrafreqhohysincl {
+ type boolean;
+ config false;
+ description
+ "This field indicates whether the INTRAFREQHOHYS field is valid and included in Access Point Identification message. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTRAFREQHOHYSINCL";
+ }
+ leaf intrafreqhohys {
+ type uint8 {
+ range "0..127";
+ }
+ config false;
+ description
+ "Intra Frequency Handoff Hysteresis. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTRAFREQHOHYS";
+ }
+ leaf intrafreqhoslopeincl {
+ type boolean;
+ config false;
+ description
+ "This field indicates whether the INTRAFREQHOSLOPE field is valid and included in Access Point Identification message. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTRAFREQHOSLOPEINCL";
+ }
+ leaf intrafreqhoslope {
+ type uint8 {
+ range "0..63";
+ }
+ config false;
+ description
+ "Intra Frequency Handoff Slope. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTRAFREQHOSLOPE";
+ }
+ leaf interfreqhohysincl {
+ type boolean;
+ config false;
+ description
+ "This field indicates whether the INTERFREQHOHYS field is valid and included in Access Point Identification message. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTERFREQHOHYSINCL";
+ }
+ leaf interfreqhohys {
+ type uint8 {
+ range "0..127";
+ }
+ config false;
+ description
+ "Inter frequency handoff hysteresis. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTERFREQHOHYS";
+ }
+ leaf interfreqhoslopeincl {
+ type boolean;
+ config false;
+ description
+ "This field indicates whether the INTERFREQHOSLOPE field is valid and included in Access Point Identification message. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTERFREQHOSLOPEINCL";
+ }
+ leaf interfreqhoslope {
+ type uint8 {
+ range "0..63";
+ }
+ config false;
+ description
+ "Inter frequency handoff slope. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTERFREQHOSLOPE";
+ }
+ leaf interfreqsrchthincl {
+ type boolean;
+ config false;
+ description
+ "This field indicates whether the INTERFREQSRCHTH field is valid and included in Access Point Identification message. Refer {{bibref|3GPP2-C.S0005}} for definition.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTERFREQSRCHTHINCL";
+ }
+ leaf interfreqsrchth {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "Inter-frequency search threshold. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.INTERFREQSRCHTH";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDM.";
+ }
+
+ grouping cdma2000-one-x-ran-apidtm-g {
+ description
+ "This object can be configured only if {{param|.Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable}} is set to {{true}}.";
+ leaf apidtextcha-ri-len {
+ type uint16 {
+ range "0..256";
+ }
+ config false;
+ description
+ "Access Point identification Text CHARi field Length ({{param|APIDTEXTCHARi}}). Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDTM.APIDTEXTCHARiLEN";
+ }
+ leaf apidtextmsgencoding {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "Access Point identification Text message encoding. Refer {{bibref|3GPP2-C.S0005}} and {{bibref|3GPP2-C.R1001}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDTM.APIDTEXTMSGENCODING";
+ }
+ leaf apidtextcha-ri {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "Access Point Identification Text. Refer {{bibref|3GPP2-C.S0005}} and {{bibref|3GPP2-C.R1001}} for definitions.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDTM.APIDTEXTCHARi";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APIDTM.";
+ }
+
+ grouping cdma2000-one-x-ran-appim-g {
+ description
+ "This object can be configured only if {{param|.Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable}} is set to {{true}}.";
+ leaf lifetime {
+ type uint8 {
+ range "0..255";
+ }
+ config false;
+ description
+ "Lifetime of the information in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.LIFETIME";
+ }
+ leaf numappirec {
+ type uint16 {
+ range "0..511";
+ }
+ config false;
+ description
+ "The number of entries for {{object|.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.NUMAPPIREC";
+ }
+ leaf appirec-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIRECNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.";
+ }
+
+ grouping cdma2000-one-x-ran-appim-appirec-g {
+ description
+ "This object can be configured only if {{param|.Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable}} is set to {{true}}.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.Alias";
+ }
+ leaf apassntype {
+ type uint8 {
+ range "0..7";
+ }
+ config false;
+ description
+ "Access point association type the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APASSNTYPE";
+ }
+ leaf apsidsameasprevious {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "SID same as previous indicator in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APSIDSAMEASPREVIOUS";
+ }
+ leaf apnidsameasprevious {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "NID same as previous indicator in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APNIDSAMEASPREVIOUS";
+ }
+ leaf apbandsameasprevious {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Bandclass same as previous indicator in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APBANDSAMEASPREVIOUS";
+ }
+ leaf apfreqsameasprevious {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Frequency same as previous indicator in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APFREQSAMEASPREVIOUS";
+ }
+ leaf appnrecsameasprevious {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "PN offset same as previous indicator in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APPNRECSAMEASPREVIOUS";
+ }
+ leaf apsid {
+ type uint16 {
+ range "0..32767";
+ }
+ description
+ "Access point SID in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APSID";
+ }
+ leaf apnid {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Access point NID in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APNID";
+ }
+ leaf apband {
+ type uint8 {
+ range "0..31";
+ }
+ description
+ "Access point bandclass in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APBAND";
+ }
+ leaf apfreq {
+ type uint16 {
+ range "0..2047";
+ }
+ description
+ "Access point frequency in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APFREQ";
+ }
+ leaf appnrectype {
+ type uint8 {
+ range "0..7";
+ }
+ description
+ "Access point PN offset in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APPNRECTYPE";
+ }
+ leaf appnreclen {
+ type uint8 {
+ range "0..31";
+ }
+ description
+ "Length in octets of the access point PN record ({{param|APPNREC}}) in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APPNRECLEN";
+ }
+ leaf appnrec {
+ type binary {
+ length "0..31";
+ }
+ description
+ "Access point PN Record in the access point pilot information record. Refer {{bibref|3GPP2-C.S0005}} for definitions";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.APPNREC";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}.";
+ }
+
+ grouping cdma2000-one-x-pcf-config-g {
+ description
+ "CDMA2000 1x PCF configuration information.";
+ leaf pcfpdsn-health-monitor-interval {
+ type uint8 {
+ range "0..180";
+ }
+ units "seconds";
+ config false;
+ description
+ "PDSN health check monitor interval in {{units}}. Setting the value to 0 disables the PDSN Health Monitoring Feature. Setting any non-zero value enables the PDSN Health Monitoring Feature and sets that non-zero value as the timer interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPDSNHealthMonitorInterval";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.";
+ }
+
+ grouping cdma2000-one-x-pcf-config-pcf-performance-stats-g {
+ description
+ "This object is used in obtaining the PCF stats";
+ leaf a10-setup-failure-no-reason {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with an unspecified reason (A11 error code : 0x80)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureNoReason";
+ }
+ leaf a10-setup-failure-admin-prohibit {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Admin Prohibited\" (A11 error code : 0x81).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureAdminProhibit";
+ }
+ leaf a10-setup-failure-insuff-resources {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Insufficient Resources\" (A11 error code: 0x82).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureInsuffResources";
+ }
+ leaf a10-setup-failure-failed-auth {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Mobile Node Authentication Failure\" (A11 error code: 0x83).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureFailedAuth";
+ }
+ leaf a10-setup-failure-id-mismatch {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Id Mismatch\" (A11 error code: 0x85)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureIdMismatch";
+ }
+ leaf a10-setup-failure-malformed-req {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Malformed Request\" (A11 error code: 0x86)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureMalformedReq";
+ }
+ leaf a10-setup-failure-unknown-pdsn {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Unknown PDSN\" (A11 error code: 0x88)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureUnknownPDSN";
+ }
+ leaf a10-setup-failure-unsupp-vend-id {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Unsupported Vendor Id\" (A11 error code: 0x89)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10SetupFailureUnsuppVendId";
+ }
+ leaf total-a10-closed-by-rnc {
+ type uint64;
+ description
+ "Number of A10 closed by the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10ClosedByRnc";
+ }
+ leaf total-a10-closed-by-pdsn {
+ type uint64;
+ description
+ "Number of A10 closed by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10ClosedByPDSN";
+ }
+ leaf total-a10-success-pages {
+ type uint64;
+ description
+ "Numebr of A10 Pages initiated by PCFsucceeded.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10SuccessPages";
+ }
+ leaf total-a10-failed-pages {
+ type uint64;
+ description
+ "Numebr of A10 Pages initiated by PCF failed.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10FailedPages";
+ }
+ leaf total-a10-ingress-bytes {
+ type uint64;
+ units "bytes";
+ description
+ "Number of {{units}} received from the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10IngressBytes";
+ }
+ leaf total-a10-egress-bytes {
+ type uint64;
+ units "bytes";
+ description
+ "Number of {{units}} transmitted to the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10EgressBytes";
+ }
+ leaf a10-reg-update-received {
+ type uint64;
+ description
+ "Number of A10 Registration updates received by the FAP PCF";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.A10RegUpdateReceived";
+ }
+ leaf total-a10-dropped-pages {
+ type uint64;
+ description
+ "Number of A10 Pages initiated by PCF dropped";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.TotalA10DroppedPages";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFConfig.PCFPerformanceStats.";
+ }
+
+ grouping cdma2000-one-x-batch-pcfpdsn-g {
+ description
+ "The Batch configuration Object used to configure PDSN table using a start and end IP address. The order of the address is used as part of PDSN selection algorithm, e.g., the first element is considered PDSN number 0. (Refer to {{bibref|3GPP2-A.S0013}}). To get individual PDSN entries use the {{object|.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.}}.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.Alias";
+ }
+ leaf batch-table-number {
+ type int64;
+ description
+ "The BatchTable Number should be given only once during the creation of a Batch Table. This is the Key Attribute that uniquely identifies a BatchTable entry. This number indicates the index of this batch to determine the PDSN number in the PDSN selection algorithm ({{bibref|3GPP2-A.S0013}}).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableNumber";
+ }
+ leaf batch-table-start-ip-address {
+ type inet:ip-address;
+ config false;
+ description
+ "Start IP address of the range of PDSNs.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableStartIPAddress";
+ }
+ leaf batch-table-end-ip-address {
+ type inet:ip-address;
+ config false;
+ description
+ "End IP address of the range of PDSNs.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableEndIPAddress";
+ }
+ leaf batch-table-security-parameter-index {
+ type uint32 {
+ range "0 | 256..4294967295";
+ }
+ config false;
+ description
+ "Security Parameter Index to be used.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableSecurityParameterIndex";
+ }
+ leaf batch-table-secret-key {
+ type binary {
+ length "0..16";
+ }
+ config false;
+ description
+ "Secret key in 32-digit hexidecimal representation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableSecretKey";
+ }
+ leaf batch-table-ios-version {
+ type enumeration {
+ enum "tia-878-ballot" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-ballot";
+ }
+ enum "tia-878-1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-1";
+ }
+ enum "tia-878-a" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-a";
+ }
+ enum "tia-878-legacy" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-legacy";
+ }
+ }
+ config false;
+ description
+ "IOS Version of this PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTableIOSVersion";
+ }
+ leaf batch-table-pdsn-admin-status {
+ type int64;
+ config false;
+ description
+ "Administrative status of this PDSN. 0- UP 1-DOWN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.BatchTablePDSNAdminStatus";
+ }
+ leaf pdsn-type {
+ type enumeration {
+ enum "one-x" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.PDSNType - OneX";
+ }
+ enum "hrpd-rev0" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.PDSNType - HRPDRev0";
+ }
+ enum "hrpd-rev-a" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.PDSNType - HRPDRevA";
+ }
+ }
+ config false;
+ description
+ "Indicates the PDSN type for this batch.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.PDSNType";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.";
+ }
+
+ grouping cdma2000-one-x-pcfpdsn-g {
+ description
+ "PCFPDSN Object configured for 1x. {{object|.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}.}} table should be used to configure PDSN details.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.Alias";
+ }
+ leaf pdsn-number {
+ type int64;
+ description
+ "Index of this PDSN object in the PCFPDSNCollection array. The index is used as PDSN number in PDSN selection algorithm. ({{bibref|3GPP2-A.S0013}})";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PDSNNumber";
+ }
+ leaf security-parameter-index {
+ type uint32 {
+ range "0 | 256..4294967295";
+ }
+ description
+ "Security Parameter Index used";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.SecurityParameterIndex";
+ }
+ leaf security-key {
+ type binary {
+ length "0..16";
+ }
+ description
+ "Secret key in 32-digit hexidecimal representation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.SecurityKey";
+ }
+ leaf ios-version {
+ type enumeration {
+ enum "tia-878-ballot" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.IOSVersion - TIA-878-ballot";
+ }
+ enum "tia-878-1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.IOSVersion - TIA-878-1";
+ }
+ enum "tia-878-a" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.IOSVersion - TIA-878-a";
+ }
+ enum "tia-878-legacy" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.IOSVersion - TIA-878-legacy";
+ }
+ }
+ config false;
+ description
+ "HRPD IOS Version of this PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.IOSVersion";
+ }
+ leaf pds-nadmin-status {
+ type int64;
+ config false;
+ description
+ "Administrative status of this PDSN. 0- UP 1-DOWN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PDSNadminStatus";
+ }
+ leaf pdsn-health-status {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Reachability status of this PDSN. 0-unreachable, 1-reachable.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PDSNHealthStatus";
+ }
+ leaf pdsnip-address {
+ type inet:ip-address;
+ config false;
+ description
+ "IP address of the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PDSNIPAddress";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.";
+ }
+
+ grouping cdma2000-one-x-pcfpdsn-a11-reg-update-stats-g {
+ description
+ "This object is used in obtaining the A11 Registration Update stats for each PDSN";
+ leaf pdsn-number-reg-update-perf {
+ type int64;
+ description
+ "The PDSN Number";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.PDSNNumberRegUpdatePerf";
+ }
+ leaf pdsnip-address-reg-update-perf {
+ type inet:ip-address;
+ description
+ "The IP Address of the PDSN for which the A11 Reg Update stats is obtained";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.PDSNIPAddressRegUpdatePerf";
+ }
+ leaf a11-reg-update-received-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-update messages receieved from a PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateReceivedPDSN";
+ }
+ leaf a11-reg-update-id-check-fail-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages receieved from a PDSN that failed ID validation";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateIDCheckFailPDSN";
+ }
+ leaf a11-reg-update-auth-check-fail-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN that failed Authentication";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateAuthCheckFailPDSN";
+ }
+ leaf a11-reg-update-for-unknown-psipdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with unknown PSI";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateForUnknownPSIPDSN";
+ }
+ leaf a11-reg-update-unspecified-reason-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with unspecified reason code";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateUnspecifiedReasonPDSN";
+ }
+ leaf a11-reg-update-ppp-timeout-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"PPP Timeout\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdatePppTimeoutPDSN";
+ }
+ leaf a11-reg-update-registration-timeout-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Registration Timeout\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateRegistrationTimeoutPDSN";
+ }
+ leaf a11-reg-update-pdsn-error-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"PDSN Error\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdatePDSNErrorPDSN";
+ }
+ leaf a11-reg-update-inter-pcf-handoff-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Inter PCF Handoff\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateInterPCFHandoffPDSN";
+ }
+ leaf a11-reg-update-inter-pdsn-handoff-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Inter PDSN Handoff\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateInterPDSNHandoffPDSN";
+ }
+ leaf a11-reg-update-pdsnoamp-intervention-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"PDSN OAMP Intervention\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdatePDSNOAMPInterventionPDSN";
+ }
+ leaf a11-reg-update-accounting-error-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Accounting Error\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateAccountingErrorPDSN";
+ }
+ leaf a11-reg-update-user-failed-authentication-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"User Failed Authentication\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateUserFailedAuthenticationPDSN";
+ }
+ leaf a11-reg-update-unknown-cause-code-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with Unknown Cause Code";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateUnknownCauseCodePDSN";
+ }
+ leaf a11-reg-update-without-reason-code-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with PDSN Code Not Included";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateWithoutReasonCodePDSN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.A11RegUpdateStats.";
+ }
+
+ grouping cdma2000-one-x-pcfpdsn-pcfpdsn-stats-g {
+ description
+ "This object is used in obtaining the PCF PDSN stats for each PDSN";
+ leaf a10-setup-attempts-pdsn {
+ type uint64;
+ description
+ "Number of attempts the PCF made to establish an A10 connection with PDSN. If PCF fails establishing such a connection on this PDSN and goes on to use another PDSN for that connection, it will be counted as two setup attempts.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A10SetupAttemptsPDSN";
+ }
+ leaf a10-setup-successes-pdsn {
+ type uint64;
+ description
+ "Number of times PCF succeeded in establishing an A10 connection with this PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A10SetupSuccessesPDSN";
+ }
+ leaf a10-setup-blocks-pdsn {
+ type uint64;
+ description
+ "Number of times PCF was blocked in establishing an A10 connection with this PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A10SetupBlocksPDSN";
+ }
+ leaf a11-reg-req-denied-id-mismatch-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Id Mismatch\" (A11 error code: 0x85) by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedIdMismatchPDSN";
+ }
+ leaf a11-reg-req-denied-unknown-pdsnpdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Unknown PDSN\" (A11 error code: 0x88)by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedUnknownPDSNPDSN";
+ }
+ leaf a11-reg-req-denied-no-reason-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with no reason code by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedNoReasonPDSN";
+ }
+ leaf a11-reg-req-denied-admin-prohibit-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Admin Prohibited\" (A11 error code : 0x81) by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedAdminProhibitPDSN";
+ }
+ leaf a11-reg-req-denied-insuff-resources-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Insufficient Resources\" (A11 error code: 0x82) by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedInsuffResourcesPDSN";
+ }
+ leaf a11-reg-req-denied-failed-auth-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Mobile Node Authentication Failure\" (A11 error code: 0x83) by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedFailedAuthPDSN";
+ }
+ leaf a11-reg-req-denied-malformed-req-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Malformed Request\" (A11 error code: 0x86) by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedMalformedReqPDSN";
+ }
+ leaf a11-reg-req-denied-unsupp-vend-id-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Unsupported Vendor Id\" (A11 error code: 0x8D)by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedUnsuppVendIdPDSN";
+ }
+ leaf a11-reg-req-denied-reverse-tunnel-unavailable-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Reverse Tunnel Unavailable\" (A11 error code: 0x89)by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedReverseTunnelUnavailablePDSN";
+ }
+ leaf a11-reg-req-denied-reverse-tunnel-tbit-not-set-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Reverse Tunnel Tbit Not Set\" (A11 error code: 0x8A)by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedReverseTunnelTbitNotSetPDSN";
+ }
+ leaf a11-reg-req-denied-unknown-error-code-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with an unspecified reason (A11 error code : 0x80) by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedUnknownErrorCodePDSN";
+ }
+ leaf a10-reg-req-for-registration-retransmissions-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Requests retransmitted during A10 setup";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A10RegReqForRegistrationRetransmissionsPDSN";
+ }
+ leaf a10-reg-req-for-re-registration-retransmissions-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Requests retransmitted during A10 reregistration";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A10RegReqForReRegistrationRetransmissionsPDSN";
+ }
+ leaf a10-reg-req-for-release-retransmissions-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Requests retransmitted during A10 realease";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.A10RegReqForReleaseRetransmissionsPDSN";
+ }
+ leaf pdsn-number-pdsn-perf {
+ type int64;
+ description
+ "The PDSN Number";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.PDSNNumberPDSNPerf";
+ }
+ leaf pds-nip-address-pdsn-perf {
+ type inet:ip-address;
+ description
+ "The IP Address of the PDSN for which the PCF PDSN stats is obtained";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.PDSNipAddressPDSNPerf";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}.PCFPDSNStats.";
+ }
+
+ grouping cdma2000-one-x-stats-g {
+ description
+ "This object contains 1x FAP statistics aggregated over all connections of all users over all sectors.";
+ leaf registration-attempts {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of registration attempts";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.RegistrationAttempts";
+ }
+ leaf registration-fails {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of registrations failed";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.RegistrationFails";
+ }
+ leaf registrations-blocked {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Unauthorized registrations blocked by admission control";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.RegistrationsBlocked";
+ }
+ leaf page-attempts {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of attemots to page requests received from the core";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.PageAttempts";
+ }
+ leaf page-fails {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of page requests rejected or not responded";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.PageFails";
+ }
+ leaf voice-call-attempts {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of voice call attempts";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.VoiceCallAttempts";
+ }
+ leaf voice-call-failures {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of voice call attempts which failed for various reasons";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.VoiceCallFailures";
+ }
+ leaf voice-calls-blocked {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of voice calls blocked due to lack of authorization";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.VoiceCallsBlocked";
+ }
+ leaf voice-calls-dropped {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Number of voice calls dropped due to various reasons other than a normal call release";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.VoiceCallsDropped";
+ }
+ leaf data-call-attempts {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of data call attempts";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.DataCallAttempts";
+ }
+ leaf data-call-failures {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of data call attemots failed for various reasons";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.DataCallFailures";
+ }
+ leaf data-calls-blocked {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of data calls failed due to lack of authorization";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.DataCallsBlocked";
+ }
+ leaf data-calls-dropped {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of data calls dropped due to reasons other than a normal release.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.DataCallsDropped";
+ }
+ leaf average-voice-call {
+ type uint32 {
+ range "0..4294967295";
+ }
+ units "milliseconds";
+ description
+ "Average voice call duration in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.AverageVoiceCall";
+ }
+ leaf average-data-call {
+ type uint32 {
+ range "0..4294967295";
+ }
+ units "milliseconds";
+ description
+ "Average data call duration in {{units}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.AverageDataCall";
+ }
+ leaf average-session-in-sec {
+ type uint32 {
+ range "0..4294967295";
+ }
+ units "seconds";
+ description
+ "Average session duration in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.AverageSessionInSec";
+ }
+ leaf total-voice-calls {
+ type uint32 {
+ range "0..4294967295";
+ }
+ units "seconds";
+ description
+ "Total number of successful voice calls";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.TotalVoiceCalls";
+ }
+ leaf total-data-calls {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Total number of successful data calls";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.TotalDataCalls";
+ }
+ leaf fwd-voice-packet-drop-percentage {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Percentage of voice packets dropped in MAC due to signaling";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.FwdVoicePacketDropPercentage";
+ }
+ leaf rev-voice-packet-drop-percentage {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Percentage of voice packets received with bad FQI";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.RevVoicePacketDropPercentage";
+ }
+ leaf fwd-avg-data-rate {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Average data rate of the scheduler on the forward link";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.FwdAvgDataRate";
+ }
+ leaf rev-avg-data-rate {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Average data rate of the scheduler on reverse link";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.RevAvgDataRate";
+ }
+ leaf bc-index-zero-to-one-transitions {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Num of times the bcIndex was changed from 0 to 1 in the Extended System Parameters Message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.BcIndexZeroToOneTransitions";
+ }
+ leaf bc-index-one-to-zero-transitions {
+ type uint32 {
+ range "0..4294967295";
+ }
+ description
+ "Num of times the bcIndex was changed from 0 to 1 in the Extended System Parameters Message.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.BcIndexOneToZeroTransitions";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Stats.";
+ }
+
+ grouping cdma2000-one-x-redirect-g {
+ description
+ "CDMA2000 1x service redirection parameters.";
+ leaf redirect-channel-number {
+ type uint16 {
+ range "0..2047";
+ }
+ config false;
+ description
+ "The channel number set from ACS that the FAP uses to redirect the MS in case of closed access or when exceeding session capacity. The ACS shall push this if the the operator has provided this information in a configuration file. If this is not configured, the FAP rejects the AT. The supported range is 0..2047.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Redirect.RedirectChannelNumber";
+ }
+ leaf redirect-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "The bandclass set from ACS that the FAP uses to redirect the MS incase of closed access or when exceeding session capacity. The ACS shall push this if the the operator has provided this information in a configuration file. If this is not configured, the FAP rejects the MS. The supported range is 0..9.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Redirect.RedirectBandClass";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.OneX.Redirect.";
+ }
+
+ grouping cdma2000-hrpd-g {
+ description
+ "The object contains attributes related to HRPD.";
+ leaf pcfpdsn-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSNNumberOfEntries";
+ }
+ leaf max-batch-pcfpdsn-entries {
+ type uint64;
+ description
+ "Maximum number of entries in the {{object|.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.MaxBatchPCFPDSNEntries";
+ }
+ leaf batch-pcfpdsn-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSNNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.";
+ }
+
+ grouping cdma2000-hrpd-ran-g {
+ description
+ "The object contains attributes related to HRPD RAN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.";
+ }
+
+ grouping cdma2000-hrpd-ran-rf-g {
+ description
+ "Contains the details related to HRPD RF";
+ leaf hrpd-car-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "The Band Class this HRPD Carrier object is to operate on. Reference - {{bibref|3GPP2-C.S0057}}, Band Class Specification for CDMA2000 Spread Spectrum Systems.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.HRPDCarBandClass";
+ }
+ leaf-list rfcnfl {
+ type string {
+ length "0..64";
+ }
+ config false;
+ min-elements 1;
+ description
+ "{{list}} Each item is a FL Radio Frequency Channel Number (RFCN). Self-configuration for RFCNFL is controlled by {{param|.Capabilities.CDMA2000.HRPD.SelfConfig.RFCNFLConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.HRPD.SelfConfig.RFCNFLSelfConfigEnable}} from an enabled perspective. If the FAP's self-configuration capability for RFCNFL is available and enabled, this parameter MAY contain more than one item and the FAP is expected to select one from the list for {{param|RFCNFLInUse}}. If the self-configuration capability is not available or not enabled, then this parameter SHOULD contain only a single item. If multiple items are specified, they are done in the order of preference.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.RFCNFL";
+ }
+ leaf rfcnfl-in-use {
+ type uint64;
+ description
+ "The FL RFCN being used by the FAP. Self-configuration for RFCNFL is controlled by {{param|.Capabilities.CDMA2000.HRPD.SelfConfig.RFCNFLConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.HRPD.SelfConfig.RFCNFLSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|RFCNFL}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first value in {{param|RFCNFL}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.RFCNFLInUse";
+ }
+ leaf-list pilot-pn {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "{{list}} (maximum length 32) (minimum 1 items) of strings. Each item is a pilot PN offset in units of 64 PN chips. Self-configuration for pilot PN is controlled by {{param|.Capabilities.CDMA2000.HRPD.SelfConfig.PilotPNConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.HRPD.SelfConfig.PilotPNSelfConfigEnable}} from an enabled perspective. If the FAP's self-configuration capability for Pilot PN Offset is available and enabled, this parameter MAY contain more than one item and the FAP is expected to select one from the list for {{param|PilotPNInUse}}. If the self-configuration capability is not available or not enabled, then this parameter SHOULD contain only a single item. The multiplicity of the PN offsets values can also be expressed by defining a range using \"..\" (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. The order of the items has no significance.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.PilotPN";
+ }
+ leaf pilot-pn-in-use {
+ type uint64;
+ config false;
+ description
+ "The Pilot PN Offset being used by the FAP. Self-configuration for Pilot PN Offset is controlled by {{param|.Capabilities.CDMA2000.HRPD.SelfConfig.PilotPNConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.HRPD.SelfConfig.PilotPNSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the choices provided in {{param|PilotPN}}. If the self-configuration capability is not available or not enabled, then this parameter contains the first value in {{param|PilotPN}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.PilotPNInUse";
+ }
+ leaf maxfap-tx-power {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Defines the maximum transmission power allowed on the FAP. {{param}} is expressed as a range of allowed maximum power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<;Pmax_low>..<;Pmax_high>\". {{param}} identifies the limits between which the FAP can self-configure its maximum transmit power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.CDMA2000.HRPD.SelfConfig.MaxFAPTxPowerConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.HRPD.SelfConfig.MaxFAPTxPowerSelfConfigEnable}} from an enabled perspective. <;Pmax_low> and <;Pmax_high> are measured in dBm and have a range of -40.0 to 20.0 incremented by 0.1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.MaxFAPTxPower";
+ }
+ leaf maxfap-tx-power-in-use {
+ type int64;
+ units "0.1 dBm";
+ config false;
+ description
+ "The maximum transmission power measured in {{units}} currently used by the FAP. Actual values of the maximum transmission power are -40.0 dBm to 20.0 dBm in steps of {{units}}. The value of {{param}} divided by 10 yields the actual value of the maximum transmission power. Self-configuration for maximum transmission power is controlled by {{param|.Capabilities.CDMA2000.HRPD.SelfConfig.MaxFAPTxPowerConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.HRPD.SelfConfig.MaxFAPTxPowerSelfConfigEnable}} from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the range provided in {{param|MaxFAPTxPower}}. If the self-configuration capability is not available or not enabled, then this parameter contains a value selected by the ACS.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.MaxFAPTxPowerInUse";
+ }
+ leaf control-channel-rate {
+ type int64;
+ config false;
+ description
+ "The data rate of the Control Channel of this HRPD SectorElement object. Reference - {{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification, section-10.4.1.3.2.4";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.ControlChannelRate";
+ }
+ leaf sync-capsule-offset {
+ type int64;
+ config false;
+ description
+ "The offset from the control channel cycle boundary at which the synchronous capsules are to be transmitted for this HRPD SectorElement object. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification, section-9.2.6.1.4.1.2";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.SyncCapsuleOffset";
+ }
+ leaf rab-length {
+ type int64;
+ config false;
+ description
+ "The Reverse Activity Bit (RAB) length measured in slots for this HRPD SectorElement object. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification, section-7.8.6.2.2, Table 9.7.6.2-2.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.RabLength";
+ }
+ leaf rab-offset {
+ type int64;
+ config false;
+ description
+ "The Reverse Activity Bit (RAB) offset for this HRPD SectorElement object. Reference - {{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification, section-7.8.6.2.2.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.RabOffset";
+ }
+ leaf sector-id {
+ type binary {
+ length "16";
+ }
+ config false;
+ description
+ "The 128 bit Sector ID for this HRPD SectorElement object. The Sector ID is used in the computation of the long code mask. See {{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.SectorID";
+ }
+ leaf color-code {
+ type int64;
+ config false;
+ description
+ "The HRPD color code associated with this sector-element. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.ColorCode";
+ }
+ leaf subnet-mask-length {
+ type int64;
+ units "bits";
+ config false;
+ description
+ "{{param}} is the length of the HRPD SubnetMask in {{units}}. See {{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.SubnetMaskLength";
+ }
+ leaf hrpd-sec-el-reverse-link-silence-duration {
+ type int64;
+ units "frames";
+ config false;
+ description
+ "Duration of the Reverse Link Silence Interval in units of {{units}}. The duration of the silence interval to be maintained on the reverse link. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.1.4.1.1.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.HRPDSecElReverseLinkSilenceDuration";
+ }
+ leaf hrpd-sec-el-reverse-link-silence-period {
+ type int64;
+ units "frames";
+ config false;
+ description
+ "The Reverse Link Silence Interval is defined as the time interval of duration ReverseLinkSilenceDuration frames that starts at times T where T is the CDMA System Time in units of {{units}} and it satisfies the following equation: T mod (2048 x 2^(ReverseLinkSilencePeriod) - 1) = 0. The period in the access cycle duration for which the silence interval shall be maintained on the reverse link. {{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.1.4.1.1.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.HRPDSecElReverseLinkSilencePeriod";
+ }
+ leaf open-loop-adjust {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "The open loop adjustment (in {{units}}) for the access parameters of this sector-element. FAP sets this field to the negative of the nominal power to be used by ATs in the open loop power estimate, expressed as an unsigned value in units of 1 dB. The value used by the AT is -1 times the value of this field. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.2.6";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.OpenLoopAdjust";
+ }
+ leaf probe-initial-adjust {
+ type int64;
+ units "dB";
+ config false;
+ description
+ "The probe initial adjustment (in {{units}}) for the access parameters of this sector-element. FAP sets this field to the correction factor to be used by ATs in the open loop power estimate for the initial transmission on the Access Channel, expressed as a two's complement value in units of 1 dB. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.2.6";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.ProbeInitialAdjust";
+ }
+ leaf probe-num-steps {
+ type int64;
+ config false;
+ description
+ "The number of power level steps for access probes for the access parameters of this sector-element. FAP sets this field to the maximum number of access probes ATs are to transmit in a single access probe sequence. The access network shall set this field to a value in the range [1 ... 15]. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.2.6";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.ProbeNumSteps";
+ }
+ leaf probe-power-step {
+ type int64;
+ units "0.5 dB";
+ config false;
+ description
+ "The power step size (in {{units}}) applied to successive probes on the access channel associated with this sector-element. Probe power increase step. FAPsets this field to the increase in power between probes, in resolution of 0.5 dB. Reference -{{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.2.6";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.ProbePowerStep";
+ }
+ leaf a-persistence {
+ type string {
+ length "0..16";
+ }
+ config false;
+ description
+ "The A-Persistence vector, as per HRPD specification, for controlling contention access on the access channel associated with this sector-element. Reference - {{bibref|3GPP2-C.S0024-B}}, CDMA2000 High Rate Packet Data Air Interface Specification. Section-9.4.6.2.6. Format is \"0xAABBCCDD\", where AA, BB, CC, DD are in the range \"01\" through \"3F\" hex.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.APersistence";
+ }
+ leaf rssirab-threshold {
+ type int64;
+ units "0.125 dBm";
+ config false;
+ description
+ "RAB threshold for RSSI based RAB algorithm.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.RSSIRABThreshold";
+ }
+ leaf load-rab-threshold {
+ type uint16 {
+ range "0..480";
+ }
+ units "0.125 dB";
+ config false;
+ description
+ "RAB threshold for Load based RAB algorithm in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.LoadRABThreshold";
+ }
+ leaf connection-rate-limit {
+ type uint8 {
+ range "0..3";
+ }
+ config false;
+ description
+ "4 different configurations.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.ConnectionRateLimit";
+ }
+ leaf rfe-rl-balance-ratio {
+ type uint8 {
+ range "1..20";
+ }
+ config false;
+ description
+ "Config Parameter for DRC based rate control";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.RfeRLBalanceRatio";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF.";
+ }
+
+ grouping cdma2000-hrpd-pcf-config-g {
+ description
+ "CDMA2000 HRPD PCF configuration parameters.";
+ leaf pcfpdsn-health-monitor-interval {
+ type uint8 {
+ range "0..180";
+ }
+ units "seconds";
+ config false;
+ description
+ "PDSN health check monitor interval in {{units}}. Setting the value to 0 disables the PDSN Health Monitoring Feature. Setting any non-zero value enables the PDSN Health Monitoring Feature and sets that non-zero value as the timer interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPDSNHealthMonitorInterval";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.";
+ }
+
+ grouping cdma2000-hrpd-pcf-config-pcf-performance-stats-g {
+ description
+ "This object is used in obtaining the PCF stats";
+ leaf a10-setup-failure-no-reason {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with an unspecified reason (A11 error code : 0x80)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureNoReason";
+ }
+ leaf a10-setup-failure-admin-prohibit {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Admin Prohibited\" (A11 error code : 0x81).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureAdminProhibit";
+ }
+ leaf a10-setup-failure-insuff-resources {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Insufficient Resources\" (A11 error code: 0x82).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureInsuffResources";
+ }
+ leaf a10-setup-failure-failed-auth {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Mobile Node Authentication Failure\" (A11 error code: 0x83).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureFailedAuth";
+ }
+ leaf a10-setup-failure-id-mismatch {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Id Mismatch\" (A11 error code: 0x85)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureIdMismatch";
+ }
+ leaf a10-setup-failure-malformed-req {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Malformed Request\" (A11 error code: 0x86)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureMalformedReq";
+ }
+ leaf a10-setup-failure-unknown-pdsn {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Unknown PDSN\" (A11 error code: 0x88)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureUnknownPDSN";
+ }
+ leaf a10-setup-failure-unsupp-vend-id {
+ type uint64;
+ description
+ "Number of times the PCF was refused an A10 connection with a reason \"Unsupported Vendor Id\" (A11 error code: 0x89)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10SetupFailureUnsuppVendId";
+ }
+ leaf total-a10-closed-by-rnc {
+ type uint64;
+ description
+ "Number of A10 closed by the FAP RNC";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10ClosedByRnc";
+ }
+ leaf total-a10-closed-by-pdsn {
+ type uint64;
+ description
+ "Number of A10 closed by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10ClosedByPDSN";
+ }
+ leaf total-a10-success-pages {
+ type uint64;
+ description
+ "Numebr of A10 Pages initiated by PCFsucceeded";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10SuccessPages";
+ }
+ leaf total-a10-failed-pages {
+ type uint64;
+ description
+ "Numebr of A10 Pages initiated by PCF failed";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10FailedPages";
+ }
+ leaf total-a10-ingress-bytes {
+ type uint64;
+ units "bytes";
+ description
+ "Number of {{units}} received from the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10IngressBytes";
+ }
+ leaf total-a10-egress-bytes {
+ type uint64;
+ units "bytes";
+ description
+ "Number of {{units}} transmitted to the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10EgressBytes";
+ }
+ leaf a10-reg-update-received {
+ type uint64;
+ description
+ "Number of A10 Registration updates received by the FAP PCF";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.A10RegUpdateReceived";
+ }
+ leaf total-a10-dropped-pages {
+ type uint64;
+ description
+ "Number of A10 Pages initiated by PCF dropped";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.TotalA10DroppedPages";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFConfig.PCFPerformanceStats.";
+ }
+
+ grouping cdma2000-hrpd-batch-pcfpdsn-g {
+ description
+ "The Batch configuration Object used to configure PDSN table using a start and end IP address. The order of the address is used as part of PDSN selection algorithm, e.g., the first element is considered PDSN number 0 (refer to {{bibref|3GPP2-A.S0008}} and {{bibref|3GPP2-A.S0009}}). To get individual PDSN entries use the {{object|.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.}}.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.Alias";
+ }
+ leaf batch-table-number {
+ type int64;
+ description
+ "The BatchTable Number should be given only once during the creation of a Batch Table. This is the Key Attribute that uniquely identifies a BatchTable entry";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableNumber";
+ }
+ leaf batch-table-start-ip-address {
+ type inet:ip-address;
+ config false;
+ description
+ "Start IP address of the range of PDSNs";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableStartIPAddress";
+ }
+ leaf batch-table-end-ip-address {
+ type inet:ip-address;
+ config false;
+ description
+ "End IP address of the range of PDSNs";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableEndIPAddress";
+ }
+ leaf batch-table-security-parameter-index {
+ type uint32 {
+ range "0 | 256..4294967295";
+ }
+ description
+ "Security Parameter Index to be used";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableSecurityParameterIndex";
+ }
+ leaf batch-table-secret-key {
+ type binary {
+ length "0..16";
+ }
+ description
+ "Secret key in 32-digit hexidecimal representation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableSecretKey";
+ }
+ leaf batch-table-ios-version {
+ type enumeration {
+ enum "tia-878-ballot" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-ballot";
+ }
+ enum "tia-878-1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-1";
+ }
+ enum "tia-878-a" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-a";
+ }
+ enum "tia-878-legacy" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableIOSVersion - TIA-878-legacy";
+ }
+ }
+ config false;
+ description
+ "HRPD IOS Version of this PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTableIOSVersion";
+ }
+ leaf batch-table-pdsn-admin-status {
+ type int64;
+ config false;
+ description
+ "Administrative status of this PDSN. 0- UP 1-DOWN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.BatchTablePDSNAdminStatus";
+ }
+ leaf pdsn-type {
+ type string {
+ length "0..32";
+ }
+ config false;
+ description
+ "Indicates the PDSN type for this batch.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.PDSNType";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.";
+ }
+
+ grouping cdma2000-hrpd-pcfpdsn-g {
+ description
+ "PCFPDSN Object configured for HRPD. {{object|.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}.}} table should be used to configure PDSN details.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.Alias";
+ }
+ leaf pdsn-number {
+ type int64;
+ description
+ "Index of this PDSN object in the PCFPDSNCollection array. The index is used as PDSN number in PDSN selection algorithm (refer to {{bibref|3GPP2-A.S0008}} and {{bibref|3GPP2-A.S0009}})";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PDSNNumber";
+ }
+ leaf security-parameter-index {
+ type uint32 {
+ range "256..4294967295";
+ }
+ description
+ "Security Parameter Index used";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.SecurityParameterIndex";
+ }
+ leaf security-key {
+ type binary {
+ length "0..16";
+ }
+ description
+ "Secret key in 32-digit hexidecimal representation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.SecurityKey";
+ }
+ leaf ios-version {
+ type enumeration {
+ enum "tia-878-ballot" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.IOSVersion - TIA-878-ballot";
+ }
+ enum "tia-878-1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.IOSVersion - TIA-878-1";
+ }
+ enum "tia-878-a" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.IOSVersion - TIA-878-a";
+ }
+ enum "tia-878-legacy" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.IOSVersion - TIA-878-legacy";
+ }
+ }
+ config false;
+ description
+ "HRPD IOS Version of this PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.IOSVersion";
+ }
+ leaf pds-nadmin-status {
+ type int64;
+ config false;
+ description
+ "Administrative status of this PDSN. 0- UP 1-DOWN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PDSNadminStatus";
+ }
+ leaf pdsn-health-status {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Reachability status of this PDSN. 0-unreachable, 1-reachable.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PDSNHealthStatus";
+ }
+ leaf pdsnip-address {
+ type inet:ip-address;
+ config false;
+ description
+ "IP address of the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PDSNIPAddress";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.";
+ }
+
+ grouping cdma2000-hrpd-pcfpdsn-a11-session-update-stats-g {
+ description
+ "This object is used in obtaining the A11 Session Update stats for each PDSN";
+ leaf pdsn-number-session-update-perf {
+ type int64;
+ description
+ "The PDSN Number";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.PDSNNumberSessionUpdatePerf";
+ }
+ leaf pdsnip-address-session-update-perf {
+ type inet:ip-address;
+ description
+ "The IP Address of the PDSN for which the A11 Session Update stats is obtained";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.PDSNIPAddressSessionUpdatePerf";
+ }
+ leaf a11-session-update-received-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from a PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateReceivedPDSN";
+ }
+ leaf a11-session-update-accepted-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates accepted for a PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateAcceptedPDSN";
+ }
+ leaf a11-session-update-extended-apipdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN that contained extended API";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateExtendedAPIPDSN";
+ }
+ leaf a11-session-update-for-unknown-psipdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN that conatained unknown PSI";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateForUnknownPSIPDSN";
+ }
+ leaf a11-session-update-denied-id-check-fail-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code \"ID Check Failed \"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedIDCheckFailPDSN";
+ }
+ leaf a11-session-update-denied-auth-check-fail-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code\"Auth Check Failed\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedAuthCheckFailPDSN";
+ }
+ leaf a11-session-update-denied-reason-unspecified-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code \"Unspecified Reason\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedReasonUnspecifiedPDSN";
+ }
+ leaf a11-session-update-denied-poorly-formed-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code \"Poorly Formed\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedPoorlyFormedPDSN";
+ }
+ leaf a11-session-update-denied-session-params-not-updated-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code \"Parameters Not Updated\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedSessionParamsNotUpdatedPDSN";
+ }
+ leaf a11-session-update-denied-qo-s-profile-id-not-supported-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code \"QoS Profile Id Not Updated\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedQoSProfileIdNotSupportedPDSN";
+ }
+ leaf a11-session-update-denied-insufficient-resources-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code \"Insufficient Resources\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedInsufficientResourcesPDSN";
+ }
+ leaf a11-session-update-denied-handoff-in-progress-pdsn {
+ type uint64;
+ description
+ "Number of A11 Session Updates received from this PDSN denied due to reason code\"Handoff In Progress\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.A11SessionUpdateDeniedHandoffInProgressPDSN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11SessionUpdateStats.";
+ }
+
+ grouping cdma2000-hrpd-pcfpdsn-a11-reg-update-stats-g {
+ description
+ "This object is used in obtaining the A11 Registration Update stats for each PDSN.";
+ leaf pdsn-number-reg-update-perf {
+ type int64;
+ description
+ "The PDSN Number";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.PDSNNumberRegUpdatePerf";
+ }
+ leaf pdsnip-address-reg-update-perf {
+ type inet:ip-address;
+ description
+ "The IP Address of the PDSN for which the A11 Reg Update stats is obtained";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.PDSNIPAddressRegUpdatePerf";
+ }
+ leaf a11-reg-update-received-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-update messages receieved from a PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateReceivedPDSN";
+ }
+ leaf a11-reg-update-id-check-fail-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages receieved from a PDSN that failed ID validation";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateIDCheckFailPDSN";
+ }
+ leaf a11-reg-update-auth-check-fail-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN that failed Authentication";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateAuthCheckFailPDSN";
+ }
+ leaf a11-reg-update-for-unknown-psipdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with unknown PSI";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateForUnknownPSIPDSN";
+ }
+ leaf a11-reg-update-unspecified-reason-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with unspecified reason code";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateUnspecifiedReasonPDSN";
+ }
+ leaf a11-reg-update-ppp-timeout-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"PPP Timeout\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdatePppTimeoutPDSN";
+ }
+ leaf a11-reg-update-registration-timeout-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Registration Timeout\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateRegistrationTimeoutPDSN";
+ }
+ leaf a11-reg-update-pdsn-error-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"PDSN Error\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdatePDSNErrorPDSN";
+ }
+ leaf a11-reg-update-inter-pcf-handoff-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Inter PCF Handoff\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateInterPCFHandoffPDSN";
+ }
+ leaf a11-reg-update-inter-pdsn-handoff-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Inter PDSN Handoff\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateInterPDSNHandoffPDSN";
+ }
+ leaf a11-reg-update-pdsnoamp-intervention-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"PDSN OAMP Intervention\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdatePDSNOAMPInterventionPDSN";
+ }
+ leaf a11-reg-update-accounting-error-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"Accounting Error\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateAccountingErrorPDSN";
+ }
+ leaf a11-reg-update-user-failed-authentication-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with reason code \"User Failed Authentication\"";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateUserFailedAuthenticationPDSN";
+ }
+ leaf a11-reg-update-unknown-cause-code-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with Unknown Cause Code";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateUnknownCauseCodePDSN";
+ }
+ leaf a11-reg-update-without-reason-code-pdsn {
+ type uint64;
+ description
+ "Number of A10 Reg-Update messages received from a PDSN with PDSN Code Not Included";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.A11RegUpdateWithoutReasonCodePDSN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.A11RegUpdateStats.";
+ }
+
+ grouping cdma2000-hrpd-pcfpdsn-aux-a10-stats-g {
+ description
+ "This object is used in obtaining the Auxillary A10 Connection stats for each PDSN";
+ leaf pdsn-number-aux-a10-perf {
+ type int64;
+ description
+ "The PDSN Number";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.PDSNNumberAuxA10Perf";
+ }
+ leaf pdsnip-address-aux-a10-perf {
+ type inet:ip-address;
+ description
+ "The IP Address of the PDSN for which the PCF PDSN stats is obtained";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.PDSNIPAddressAuxA10Perf";
+ }
+ leaf aux-a10-connections-created-in-first-reg-req-pdsn {
+ type uint64;
+ description
+ "Number of Auxillary A10 Connections Created in the First Registration Request Message to the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.AuxA10ConnectionsCreatedInFirstRegReqPDSN";
+ }
+ leaf aux-a10-connections-created-in-subsequent-reg-req-pdsn {
+ type uint64;
+ description
+ "Number of Auxillary A10 Connections Created in Subsequent Registration Request Messages to the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.AuxA10ConnectionsCreatedInSubsequentRegReqPDSN";
+ }
+ leaf aux-a10-fwd-ip-flows-created-pdsn {
+ type uint64;
+ description
+ "Number of Forward IP Flows created with this PDSN for the Auxillary A10s";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.AuxA10FwdIpFlowsCreatedPDSN";
+ }
+ leaf aux-a10-rev-ip-flows-created-pdsn {
+ type uint64;
+ description
+ "Number of Forward IP Flows created with this PDSN for the Auxillary A10s";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.AuxA10RevIpFlowsCreatedPDSN";
+ }
+ leaf aux-a10-ip-flow-accounting-reg-requests-pdsn {
+ type uint64;
+ description
+ "Number of IP flow Accounting Reg Requests sent to the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.AuxA10IpFlowAccountingRegRequestsPDSN";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.AuxA10Stats.";
+ }
+
+ grouping cdma2000-hrpd-pcfpdsn-pcfpdsn-stats-g {
+ description
+ "This object is used in obtaining the PCF PDSN stats for each PDSN";
+ leaf a10-setup-attempts-pdsn {
+ type uint64;
+ description
+ "Number of attempts the PCF made to establish an A10 connection with PDSN. If PCF fails establishing such a connection on this PDSN and goes on to use another PDSN for that connection, it will be counted as two setup attempts.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A10SetupAttemptsPDSN";
+ }
+ leaf a10-setup-successes-pdsn {
+ type uint64;
+ description
+ "Number of times PCF succeeded in establishing an A10 connection with this PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A10SetupSuccessesPDSN";
+ }
+ leaf a10-setup-blocks-pdsn {
+ type uint64;
+ description
+ "Number of times PCF was blocked in establishing an A10 connection with this PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A10SetupBlocksPDSN";
+ }
+ leaf a11-reg-req-denied-id-mismatch-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Id Mismatch\" (A11 error code: 0x85) by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedIdMismatchPDSN";
+ }
+ leaf a11-reg-req-denied-unknown-pdsnpdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Unknown PDSN\" (A11 error code: 0x88)by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedUnknownPDSNPDSN";
+ }
+ leaf a11-reg-req-denied-no-reason-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with no reason code by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedNoReasonPDSN";
+ }
+ leaf a11-reg-req-denied-admin-prohibit-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Admin Prohibited\" (A11 error code : 0x81) by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedAdminProhibitPDSN";
+ }
+ leaf a11-reg-req-denied-insuff-resources-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Insufficient Resources\" (A11 error code: 0x82) by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedInsuffResourcesPDSN";
+ }
+ leaf a11-reg-req-denied-failed-auth-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Mobile Node Authentication Failure\" (A11 error code: 0x83) by the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedFailedAuthPDSN";
+ }
+ leaf a11-reg-req-denied-malformed-req-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with a reason \"Malformed Request\" (A11 error code: 0x86) by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedMalformedReqPDSN";
+ }
+ leaf a11-reg-req-denied-unsupp-vend-id-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Unsupported Vendor Id\" (A11 error code: 0x8D)by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedUnsuppVendIdPDSN";
+ }
+ leaf a11-reg-req-denied-reverse-tunnel-unavailable-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Reverse Tunnel Unavailable\" (A11 error code: 0x89)by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedReverseTunnelUnavailablePDSN";
+ }
+ leaf a11-reg-req-denied-reverse-tunnel-tbit-not-set-pdsn {
+ type uint64;
+ description
+ "Number ofA11 Registration Request denied with a reason \"Reverse Tunnel Tbit Not Set\" (A11 error code: 0x8A)by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedReverseTunnelTbitNotSetPDSN";
+ }
+ leaf a11-reg-req-denied-unknown-error-code-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Request denied with an unspecified reason (A11 error code : 0x80) by the PDSN";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A11RegReqDeniedUnknownErrorCodePDSN";
+ }
+ leaf a10-reg-req-for-registration-retransmissions-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Requests retransmitted during A10 setup";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A10RegReqForRegistrationRetransmissionsPDSN";
+ }
+ leaf a10-reg-req-for-re-registration-retransmissions-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Requests retransmitted during A10 reregistration";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A10RegReqForReRegistrationRetransmissionsPDSN";
+ }
+ leaf a10-reg-req-for-release-retransmissions-pdsn {
+ type uint64;
+ description
+ "Number of A11 Registration Requests retransmitted during A10 realease";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.A10RegReqForReleaseRetransmissionsPDSN";
+ }
+ leaf pdsn-number-pdsn-perf {
+ type int64;
+ description
+ "The PDSN Number";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.PDSNNumberPDSNPerf";
+ }
+ leaf pds-nip-address-pdsn-perf {
+ type inet:ip-address;
+ description
+ "The IP Address of the PDSN for which the PCF PDSN stats is obtained";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.PDSNipAddressPDSNPerf";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.PCFPDSNStats.";
+ }
+
+ grouping cdma2000-hrpd-redirect-g {
+ description
+ "CDMA2000 HRPD service redirection parameters.";
+ leaf redirect-channel-number {
+ type uint16 {
+ range "0..2047";
+ }
+ config false;
+ description
+ "The channel number set from ACS that the FAP uses to redirect the AT in case of closed access or when exceeding session capacity. The ACS shall push this if the the operator has provided this information in a configuration file. If this is not configured, the FAP rejects the AT. The supported range is 0..2047.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.Redirect.RedirectChannelNumber";
+ }
+ leaf redirect-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "The bandclass set from ACS that the FAP uses to redirect the AT incase of closed access or when exceeding session capacity. The ACS shall push this if the the operator has provided this information in a configuration file. If this is not configured, the FAP rejects the AT. The supported range is 0..9.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.Redirect.RedirectBandClass";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.Redirect.";
+ }
+
+ grouping cdma2000-hrpd-call-control-stats-g {
+ description
+ "Details on call control stats";
+ leaf num-session-setup-attempts {
+ type uint64;
+ description
+ "This parameter is a counter for the total number of session instances that are created on a specific FAP when a regular session setup attempt is initiated with an unknown RATI";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumSessionSetupAttempts";
+ }
+ leaf num-session-setup-successful {
+ type uint64;
+ description
+ "This parameter is a counter for the total number of successful regular session setup attempts that are initiated with an unknown RATI";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumSessionSetupSuccessful";
+ }
+ leaf num-current-sessions-established {
+ type uint64;
+ description
+ "This parameter is a counter for the total number of successfully established HRPD Sessions that exists on a specific picasso";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumCurrentSessionsEstablished";
+ }
+ leaf num-page-messages-to-at {
+ type uint64;
+ description
+ "The number of times a Page Message was sent to the AT to facilitate the setup of a connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumPageMessagesToAt";
+ }
+ leaf num-pages-succeeded {
+ type uint64;
+ description
+ "The total number of pages succeeded";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumPagesSucceeded";
+ }
+ leaf num-connections-opened {
+ type uint64;
+ description
+ "Total HRPD Connections Opened";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumConnectionsOpened";
+ }
+ leaf num-session-setups-failed-to-term-auth {
+ type uint64;
+ description
+ "This parameter is a counter for the total number of HRPD session setups that are aborted due to various failure reasons";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumSessionSetupsFailedToTermAuth";
+ }
+ leaf num-forward-rlp-bytes {
+ type uint64;
+ units "bytes";
+ description
+ "Number of HRPD packets(bytes) sent from PDSN to AT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumForwardRLPBytes";
+ }
+ leaf num-reverse-rlp-bytes {
+ type uint64;
+ units "bytes";
+ description
+ "No. of HRPD packets(bytes) sent from AT to PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumReverseRLPBytes";
+ }
+ leaf average-session-setup-time {
+ type uint64;
+ units "10 ms";
+ description
+ "This parameter maintains a record of the average session setup time for all successfully setup sessions on a specific FAP. The average session setup time is in units of {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.AverageSessionSetupTime";
+ }
+ leaf average-page-setup-time {
+ type uint64;
+ description
+ "The average connection setup time in response to a FAP initiated page. The time is from initiation of Page to the time the connection is declared open";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.AveragePageSetupTime";
+ }
+ leaf num-conn-setups-aborted {
+ type uint64;
+ description
+ "The number of connection setups that were aborted";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumConnSetupsAborted";
+ }
+ leaf num-forward-pre-rlp-dropped-pkts {
+ type uint64;
+ description
+ "Number of packets dropped at Pre-RLP queue due to overflow in forward direction. This counter will also be written to the performance log.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.NumForwardPreRLPDroppedPkts";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats.";
+ }
+
+ grouping cdma2000-hrpd-qo-s-stats-g {
+ description
+ "This object is used in obtaining the QoS Common Performance stats";
+ leaf num-qo-s-subscriber-profile-updates-rcvd {
+ type uint64;
+ description
+ "Number of subscriber QoS profile updates received from the PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumQoSSubscriberProfileUpdatesRcvd";
+ }
+ leaf num-pdsnip-flow-updates-msg-rcvd {
+ type uint64;
+ description
+ "Number of PDSN IP flow update messages received from PDSN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumPDSNIPFlowUpdatesMsgRcvd";
+ }
+ leaf num-pdsnip-flow-updates-msg-failed {
+ type uint64;
+ description
+ "Number of PDSN IP Flow updates messages that failed per RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumPDSNIPFlowUpdatesMsgFailed";
+ }
+ leaf num-qo-s-setup-requests-received {
+ type uint64;
+ description
+ "Number of QoS setup requests received from the AT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumQoSSetupRequestsReceived";
+ }
+ leaf num-qo-s-setup-requests-accepted {
+ type uint64;
+ description
+ "Number of QoS setup requests received from the AT that the FAP RNC accepted.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumQoSSetupRequestsAccepted";
+ }
+ leaf num-qo-s-setup-requests-rejected {
+ type uint64;
+ description
+ "Number of QoS setup requests from the AT that the FAP RNC rejected.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumQoSSetupRequestsRejected";
+ }
+ leaf num-reservation-on-requests-received {
+ type uint64;
+ description
+ "Number of ReservationOnRequest messages received from the AT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOnRequestsReceived";
+ }
+ leaf num-reservation-on-requests-accepted {
+ type uint64;
+ description
+ "Number of ReservationOnRequest messages received from the AT that the FAP RNC accepted.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOnRequestsAccepted";
+ }
+ leaf num-reservation-on-requests-rejected {
+ type uint64;
+ description
+ "Number of ReservationOnRequest message received from the AT that the FAP RNC rejected.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOnRequestsRejected";
+ }
+ leaf num-reservation-on-requests-failed {
+ type uint64;
+ description
+ "Number of ReservationOnRequest message received from the AT that the FAP RNC failed.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOnRequestsFailed";
+ }
+ leaf num-fwd-reservation-on-messages-sent {
+ type uint64;
+ description
+ "Number of times the FAP RNC sent a FwdReservationOn message to the AT to activate a forward Reservation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumFwdReservationOnMessagesSent";
+ }
+ leaf num-rev-reservation-on-messages-sent {
+ type uint64;
+ description
+ "Number of times the FAP RNC sent a RevReservationOn message to the AT to activate a reverse Reservation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumRevReservationOnMessagesSent";
+ }
+ leaf num-reservation-off-requests-received {
+ type uint64;
+ description
+ "Number of ReservationOffRequest message is received from the AT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOffRequestsReceived";
+ }
+ leaf num-reservation-off-requests-accepted {
+ type uint64;
+ description
+ "Number of ReservationOffRequest messages received from the AT that the FAP RNC accepted.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOffRequestsAccepted";
+ }
+ leaf num-reservation-off-requests-rejected {
+ type uint64;
+ description
+ "Number of ReservationOffRequest messages received from the AT that the FAP RNC rejected.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumReservationOffRequestsRejected";
+ }
+ leaf num-fwd-reservation-off-messages-sent {
+ type uint64;
+ description
+ "Number of times the FAP RNC sent a FwdReservationOff message to the AT to deactivate a forward Reservation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumFwdReservationOffMessagesSent";
+ }
+ leaf num-rev-reservation-off-messages-sent {
+ type uint64;
+ description
+ "Number of times the FAP RNC sent a RevReservationOff message to the AT to deactivate a reverse Reservation.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumRevReservationOffMessagesSent";
+ }
+ leaf num-qo-s-release-requests-received {
+ type uint64;
+ description
+ "Number of QoS release requests received from the AT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumQoSReleaseRequestsReceived";
+ }
+ leaf num-connection-close-initiated-no-ran-rsr {
+ type uint64;
+ description
+ "Number of times FAP RNC initiated a connection close in response to the ReservationOnRequest because it did not have the RAN resources to satisfy one or more Reservations included in the request.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.NumConnectionCloseInitiatedNoRANRsr";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.QoSStats.";
+ }
+
+ grouping cdma2000-hrpd-rnc-sig-apps-stats-g {
+ description
+ "Stats for HRPD RNC signaling procedures.";
+ leaf c-num-page-requests {
+ type uint64;
+ description
+ "Number of HRPD Page requests made after data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumPageRequests";
+ }
+ leaf s-num-page-requests {
+ type uint64;
+ description
+ "Number of HRPD Page requests made before data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumPageRequests";
+ }
+ leaf s-num-connection-setup-attempts {
+ type uint64;
+ description
+ "Number of HRPD Connection setups attempted before data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumConnectionSetupAttempts";
+ }
+ leaf c-num-connection-setup-attempts {
+ type uint64;
+ description
+ "Number of HRPD Connection setups attempted after data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumConnectionSetupAttempts";
+ }
+ leaf s-num-connection-setup-success {
+ type uint64;
+ description
+ "Number of HRPD Connection setups succeeded before data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumConnectionSetupSuccess";
+ }
+ leaf c-num-connection-setup-success {
+ type uint64;
+ description
+ "Number of HRPD Connection setups succeeded after data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumConnectionSetupSuccess";
+ }
+ leaf s-num-normal-connection-closes {
+ type uint64;
+ description
+ "The number of HRPD connections that were closed normally before data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumNormalConnectionCloses";
+ }
+ leaf c-num-normal-connection-closes {
+ type uint64;
+ description
+ "The number of HRPD connections that were closed normally after data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumNormalConnectionCloses";
+ }
+ leaf s-num-total-connection-closes {
+ type uint64;
+ description
+ "The total number of HRPD connections closed, normally or abnormally, data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumTotalConnectionCloses";
+ }
+ leaf c-num-total-connection-closes {
+ type uint64;
+ description
+ "The total number of HRPD connections closed, normally or abnormally, after data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumTotalConnectionCloses";
+ }
+ leaf s-num-rf-related-drops {
+ type uint64;
+ description
+ "Number of HRPD connection close because of RTC loss or No FTC before data has flowed on the A10 connection";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumRFRelatedDrops";
+ }
+ leaf c-num-rf-related-drops {
+ type uint64;
+ description
+ "Number of HRPD connection close because of RTC loss or No FTC after data has flowed on the A10 connection";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumRFRelatedDrops";
+ }
+ leaf s-num-page-responses {
+ type uint64;
+ description
+ "Total number of successful responses to HRPD page requests that were received from the AT before the final page timeout and before data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumPageResponses";
+ }
+ leaf c-num-page-responses {
+ type uint64;
+ description
+ "Total number of successful responses to HRPD page requests that were received from the AT before the final page timeout and after data has flowed on the A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumPageResponses";
+ }
+ leaf s-num-rf-related-drops-rtc-lost {
+ type uint64;
+ description
+ "This statistic counts the number of times the HRPD connection was dropped before data has flowed on the A10 connection because a Reverse Traffic Channel (RTC) lost indication was received, and as a result, no reverse link for the connection were available.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumRFRelatedDropsRTCLost";
+ }
+ leaf c-num-rf-related-drops-rtc-lost {
+ type uint64;
+ description
+ "This statistic counts the number of times the HRPD connection was dropped after data has flowed on the A10 connection because a Reverse Traffic Channel (RTC) lost indication was received, and as a result, no reverse link for the connection were available.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumRFRelatedDropsRTCLost";
+ }
+ leaf s-num-rf-related-drops-no-ftc {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped before data has flowed on the A10 connection because of indications that there is no active Forward Traffic Channel (FTC) available.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumRFRelatedDropsNoFTC";
+ }
+ leaf c-num-rf-related-drops-no-ftc {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped after data has flowed on the A10 connection because of indications that there is no active Forward Traffic Channel (FTC) available.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumRFRelatedDropsNoFTC";
+ }
+ leaf s-num-network-error-drops {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were closed before data has flowed on the A10 connection because the FAP closed the open A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumNetworkErrorDrops";
+ }
+ leaf c-num-network-error-drops {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were closed after data has flowed on the A10 connection because the FAP closed the open A10 connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumNetworkErrorDrops";
+ }
+ leaf s-num-network-error-drops-rnc-internal {
+ type uint64;
+ description
+ "This statistic counts the number of open HRPD connections that were closed before data has flowed on the A10 connection because the FAP closed the A10 connection due to internal failures.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumNetworkErrorDropsRNCInternal";
+ }
+ leaf c-num-network-error-drops-rnc-internal {
+ type uint64;
+ description
+ "This statistic counts the number of open HRPD connections that were closed after data has flowed on the A10 connection because the FAP closed the A10 connection due to internal failures.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumNetworkErrorDropsRNCInternal";
+ }
+ leaf s-num-network-error-drops-rnc-external {
+ type uint64;
+ description
+ "This statistic counts the number of open HRPD connections that were closed before data has flowed on the A10 connection because the FAP closed the A10 connection due to the PDSN unreachablity.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumNetworkErrorDropsRNCExternal";
+ }
+ leaf c-num-network-error-drops-rnc-external {
+ type uint64;
+ description
+ "This statistic counts the number of open HRPD connections that were closed after data has flowed on the A10 connection because the FAP closed the A10 connection due to the PDSN unreachablity.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumNetworkErrorDropsRNCExternal";
+ }
+ leaf s-num-network-error-drops-a10-setup-fail {
+ type uint64;
+ description
+ "This statistic counts the number of open HRPD connections that were closed before data has flowed on the A10 connection because there was failure in the A10 connection set-up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumNetworkErrorDropsA10SetupFail";
+ }
+ leaf c-num-network-error-drops-a10-setup-fail {
+ type uint64;
+ description
+ "This statistic counts the number of open HRPD connections that were closed after data has flowed on the A10 connection because there was failure in the A10 connection set-up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumNetworkErrorDropsA10SetupFail";
+ }
+ leaf s-num-misc-drops-sector-down {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped before data has flowed on the A10 connection because there is only one pilot available for the connection and a sector down indication has been received for that pilot.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumMiscDropsSectorDown";
+ }
+ leaf c-num-misc-drops-sector-down {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped after data has flowed on the A10 connection because there is only one pilot available for the connection and a sector down indication has been received for that pilot.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumMiscDropsSectorDown";
+ }
+ leaf s-num-misc-drops-internal-error {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped before data has flowed on the A10 connection due to internal software errors.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumMiscDropsInternalError";
+ }
+ leaf c-num-misc-drops-internal-error {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped after data has flowed on the A10 connection due to internal software errors.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumMiscDropsInternalError";
+ }
+ leaf c-num-misc-drops-state-mismatch {
+ type uint64;
+ description
+ "This statistic counts the number of HRPD connections that were dropped after data has flowed on the A10 connection when the FAP finds a state mismatch between itself andthe AT. Such a mismatch is found when a connection request message is received from the AT, and the connection is already open as perceived by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumMiscDropsStateMismatch";
+ }
+ leaf s-num-misc-drops-state-mismatch {
+ type uint64;
+ description
+ "This statistic counts the number of connections that were dropped before the demarcation point when the FAP finds a state mismatch between itself and the AT. Such a mismatch is found when a connection request message is received from the AT, and the connection is already open as perceived by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumMiscDropsStateMismatch";
+ }
+ leaf s-num-misc-drops-due-to-rlp {
+ type uint64;
+ description
+ "This statistic counts the number of times the HRPD connection was dropped before data has flowed on the A10 connection at the request of the Radio Link Protocol. This request is generated when the HDR Fast Path component finds that the reset acknowledgment timeout has expired for the connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.SNumMiscDropsDueToRLP";
+ }
+ leaf c-num-misc-drops-due-to-rlp {
+ type uint64;
+ description
+ "This statistic counts the number of times the HRPD connection was dropped after data has flowed on the A10 connection at the request of the Radio Link Protocol. This request is generated when the HDR Fast Path component finds that the reset acknowledgment timeout has expired for the connection.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.CNumMiscDropsDueToRLP";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.RNCSigAppsStats.";
+ }
+
+ grouping cdma2000-hrpd-access-auth-config-g {
+ description
+ "HRPD A12-related service stats.";
+ leaf a12-access-authentication-enable {
+ type int64;
+ config false;
+ description
+ "Flag to enable/Disable HRPD Access Authentication. {{true}} - Enabled, {{false}} - Disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthConfig.A12AccessAuthenticationEnable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthConfig.";
+ }
+
+ grouping cdma2000-hrpd-access-auth-stats-g {
+ description
+ "This object is used in obtaining the Access Authentication related stats.";
+ leaf an-ppp-authentication-attempts-by-node {
+ type uint64;
+ description
+ "Number of AnPppAuthentications attempted by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.AnPppAuthenticationAttemptsByNode";
+ }
+ leaf a12-requests-sent-from-node {
+ type uint64;
+ description
+ "Number of A12 Access Requests Sent from the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12RequestsSentFromNode";
+ }
+ leaf a12-rejects-received-by-node {
+ type uint64;
+ description
+ "Number of A12 Access Rejects received from the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12RejectsReceivedByNode";
+ }
+ leaf a12-accepts-received-by-node {
+ type uint64;
+ description
+ "Number of A12 Access Accepts received by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12AcceptsReceivedByNode";
+ }
+ leaf a12-access-challenges-received-by-node {
+ type uint64;
+ description
+ "Number of A12 Access Challenges received by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12AccessChallengesReceivedByNode";
+ }
+ leaf a12-retransmits-sent-from-node {
+ type uint64;
+ description
+ "Number of A12 Access Requests retransmitted from the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12RetransmitsSentFromNode";
+ }
+ leaf a12-timeouts-events-for-node {
+ type uint64;
+ description
+ "Number of A12 Timeout events occurred at the FAP due to unreachability of the AAA server/ no response from the AAA server.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12TimeoutsEventsForNode";
+ }
+ leaf a12-malformedresponse-received-by-node {
+ type uint64;
+ description
+ "Number of Malformed A12 Access Response received by the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12MalformedresponseReceivedByNode";
+ }
+ leaf a12-bad-authenticator-received-by-node {
+ type uint64;
+ description
+ "Number of A12 Access Response with Bad Authenticator received by the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12BadAuthenticatorReceivedByNode";
+ }
+ leaf a12-unknown-type-received-by-node {
+ type uint64;
+ description
+ "Number of A12 Packet of unknown type received by the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12UnknownTypeReceivedByNode";
+ }
+ leaf a12-unknown-pkt-received-by-node {
+ type uint64;
+ description
+ "Number of unknown A12 packets received by the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12UnknownPktReceivedByNode";
+ }
+ leaf a12-unknown-server-received-by-node {
+ type uint64;
+ description
+ "Number of A12 packets received from unknown AAA server by the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12UnknownServerReceivedByNode";
+ }
+ leaf a12-other-failure-occurences-in-node {
+ type uint64;
+ description
+ "Number of A12 packets failed due to other failure occurences in the AAA server.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12OtherFailureOccurencesInNode";
+ }
+ leaf a12-by-pass-num-ats-with-unknown-mfr-code-by-node {
+ type uint64;
+ description
+ "Number of ATs with UnknowMfrCode detected in the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12ByPassNumAtsWithUnknownMfrCodeByNode";
+ }
+ leaf a12-tx-path-fail-due-to-an-ppp-error-by-node {
+ type uint64;
+ description
+ "Number of times sending of A12 packet failed in Tx Path in the FAP RNC due to \"AnPPP Error\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12TxPathFailDueToAnPppErrorByNode";
+ }
+ leaf a12-tx-path-fail-due-to-no-server-available-by-node {
+ type uint64;
+ description
+ "Number of times sending of A12 packet failed in Tx Path in the FAP RNC due to \"No Server Available\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12TxPathFailDueToNoServerAvailableByNode";
+ }
+ leaf a12-tx-path-fail-due-to-internal-error-by-node {
+ type uint64;
+ description
+ "Number of times sending of A12 packet failed in Tx Path in the FAP RNC due to \"internal error\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12TxPathFailDueToInternalErrorByNode";
+ }
+ leaf a12-tx-path-fail-due-to-no-packet-id-available-by-node {
+ type uint64;
+ description
+ "Number of times sending of A12 packet failed in Tx Path in the FAP RNC due to \"No packet id available\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12TxPathFailDueToNoPacketIdAvailableByNode";
+ }
+ leaf a12-tx-path-fail-due-to-transmit-error-by-node {
+ type uint64;
+ description
+ "Number of times sending of A12 packet failed in Tx Path in the FAP RNC due to \"Transmit Error\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12TxPathFailDueToTransmitErrorByNode";
+ }
+ leaf a12-svr-timeouts-for-node {
+ type uint64;
+ description
+ "Number of A12 server timeouts happened in the FAP RNC.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12SvrTimeoutsForNode";
+ }
+ leaf a12-enh-ta-bypass-lcp-timeout-by-node {
+ type uint64;
+ description
+ "Number of LCP timeouts happened in the FAP RNC when Enhanced TA A12Bypass mode is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12EnhTaBypassLcpTimeoutByNode";
+ }
+ leaf a12-enh-ta-bypass-chap-timeout-by-node {
+ type uint64;
+ description
+ "Number of CHAP timeouts happened in the FAP RNC when Enhanced TA A12Bypass mode is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12EnhTaBypassChapTimeoutByNode";
+ }
+ leaf a12-enh-ta-bypass-chap-invalid-by-node {
+ type uint64;
+ description
+ "Number of CHAP Challenge response received from the AT when Enhanced TA A12Bypass mode is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12EnhTaBypassChapInvalidByNode";
+ }
+ leaf a12-enh-ta-bypass-chap-nai-matches-a12-bypass-list-by-node {
+ type uint64;
+ description
+ "Number of times the CHAP NAI received from the AT matches with A12Bypass List in the FAP RNC when Enhanced TA A12Bypass mode is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12EnhTaBypassChapNaiMatchesA12BypassListByNode";
+ }
+ leaf a12-session-ta-timeout-by-node {
+ type uint64;
+ description
+ "Number of times Session timeouts occurred due to TA.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.A12SessionTaTimeoutByNode";
+ }
+ leaf access-auth-failed-due-to-session-close-total {
+ type uint64;
+ description
+ "Number of times the Access Authenticaiton failed due to Sesion close.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.AccessAuthFailedDueToSessionCloseTotal";
+ }
+ leaf access-auth-succeeded {
+ type uint64;
+ description
+ "Number of times the Access Authenticaiton succeeded.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.AccessAuthSucceeded";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.HRPD.AccessAuthStats.";
+ }
+
+ grouping cdma2000-beacon-g {
+ description
+ "This object models the attributes to control the generalized beacon. The beacon is modeled as a beacon frame composed of multiple beacon intervals. The beacon frame start is time-aligned to the instant when 1x 80ms paging frames and HRPD control channel frames align (occurs once every 1.28s).";
+ leaf beacon-admin-status {
+ type enumeration {
+ enum "locked" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconAdminStatus - Locked";
+ }
+ enum "unlocked" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconAdminStatus - Unlocked";
+ }
+ }
+ config false;
+ description
+ "Allows administrative control of beacon.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconAdminStatus";
+ }
+ leaf beacon-oper-status {
+ type enumeration {
+ enum "locked" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconOperStatus - Locked";
+ }
+ enum "unlocked" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconOperStatus - Unlocked";
+ }
+ enum "fault" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconOperStatus - Fault";
+ }
+ }
+ description
+ "Reports operational status of beacon.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconOperStatus";
+ }
+ leaf hrpd-beacon-enable {
+ type boolean;
+ config false;
+ description
+ "If set to {{true}} the HRPD-specific beacon described by {{object|HRPDBeaconList}} object is enabled. If set to {{false}}, all HRPD beacons (if any) are contained in the BeaconList object.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconEnable";
+ }
+ leaf period {
+ type uint16 {
+ range "0..32767";
+ }
+ units "80 ms slots";
+ config false;
+ description
+ "Length and periodicity of the beacon frame in {{units}}. Reference - {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.Period";
+ }
+ leaf maxfap-beacon-tx-power {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Maximum transmission power allowed on the FAP Beacon frequencies. {{param}} is expressed as a range of allowed maximum power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<;Pmax_low>..<;Pmax_high>\". {{param}} identifies the limits between which the FAP can self-configure its maximum beacon transmit power. Self-configuration for maximum beacon transmission power is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.MaxFAPBeaconTxPowerConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.MaxFAPBeaconTxPowerSelfConfigEnable}} from an enabled perspective. <;Pmax_low> and <;Pmax_high> are measured in dBm and have a range of -40.0 to 20.0 incremented by 0.1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPower";
+ }
+ leaf maxfap-beacon-tx-power-in-use {
+ type int64;
+ units "0.1 dBm";
+ description
+ "Maximum beacon transmission power measured in {{units}} currently used by the FAP on any beacon frequency. Actual values of the maximum transmission power are -40.0 dBm to 20.0 dBm in steps of 0.1 dB. The value of {{param}} divided by 10 yields the actual value of the maximum transmission power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.MaxFAPBeaconTxPowerInUse";
+ }
+ leaf beacon-pch-pwr-percentage {
+ type int64;
+ units "0.001 percent";
+ config false;
+ description
+ "Percentage of Max Sector Power Used By Paging Channel (expressed in {{units}}). For example, 93333 means 93.333% of the max sector power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconPchPwrPercentage";
+ }
+ leaf max-hrpd-beacon-tx-power {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Maximum transmission power allowed on the dedicated HRPD beacon. {{param}} is expressed as a range of allowed maximum power levels with \"..\" (two periods) between the upper and lower values, i.e. \"<Pmax_low>..<Pmax_high>\". MaxHRPDBeaconTxPower identifies the limits between which the FAP can self-configure its maximum beacon transmit power. Self-configuration for maximum beacon transmission power is controlled by {{param|.Capabilities.CDMA2000.OneX.SelfConfig.MaxFAPBeaconTxPowerConfig}} from an availability perspective and {{param|.FAPControl.CDMA2000.OneX.SelfConfig.MaxFAPBeaconTxPowerSelfConfigEnable}} from an enabled perspective. <Pmax_low> and <Pmax_high> are measured in dBm and have a range of -40.0 to 20.0 incremented by 0.1 dB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.MaxHRPDBeaconTxPower";
+ }
+ leaf max-hrpd-beacon-tx-power-in-use {
+ type int64;
+ units "0.1 dBm";
+ description
+ "Maximum beacon transmission power measured in dBm currently used by the FAP on any beacon frequency. Actual values of the maximum transmission power are -40.0 dBm to 20.0 in units of {{units}}. The value of {{param}} divided by 10 yields the actual value of the maximum transmission power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.MaxHRPDBeaconTxPowerInUse";
+ }
+ leaf beacon-pilot-pwr-percentage {
+ type int64;
+ units "0.001 percent";
+ config false;
+ description
+ "Percentage of Max Sector Power Used By Pilot Channel (expressed in {{units}}). For example, 19950 means 19.950% of total.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconPilotPwrPercentage";
+ }
+ leaf beacon-sync-pwr-percentage {
+ type int64;
+ units "0.001 percent";
+ config false;
+ description
+ "Percentage of Max Sector Power Used By Sync Channel (expressed in {{units}}). For example, 23458 means 23.458% of the max sector power.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconSyncPwrPercentage";
+ }
+ leaf max-beacon-list-entries {
+ type uint64;
+ description
+ "Maximum number of entries in the {{object|.CellConfig.CDMA2000.Beacon.BeaconList.{i}.}} object.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.MaxBeaconListEntries";
+ }
+ leaf beacon-list-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconListNumberOfEntries";
+ }
+ leaf max-hrpd-beacon-list-entries {
+ type uint64;
+ description
+ "Maximum number of entries in the {{object|.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.}} object.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.MaxHRPDBeaconListEntries";
+ }
+ leaf hrpd-beacon-list-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconListNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.";
+ }
+
+ grouping cdma2000-beacon-beacon-list-g {
+ description
+ "This object models an individual beacon intervals. It may be used to model both 1x and HRPD beacons with offset from start of beacon frame measured in 80ms slots.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.Alias";
+ }
+ leaf beacon-index {
+ type int64;
+ description
+ "Instance identifier for this beacon interval. Allowed range is 0..(BeaconListNumberOfEntries-1).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconIndex";
+ }
+ leaf offset {
+ type uint16 {
+ range "0..32767";
+ }
+ config false;
+ description
+ "Offset from the start of the beacon frame in 80ms slots.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.Offset";
+ }
+ leaf duration {
+ type uint16 {
+ range "0..32767";
+ }
+ units "80 ms slots";
+ config false;
+ description
+ "Duration of this beacon interval in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.Duration";
+ }
+ leaf transmission-format {
+ type enumeration {
+ enum "0" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.TransmissionFormat - 0";
+ }
+ enum "1" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.TransmissionFormat - 1";
+ }
+ }
+ config false;
+ description
+ "Determines if this beacon interval shall transmit HRPD (HRPD) or CDMA2000 1x.{HRPD=\"0\", 1x=\"1\"}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.TransmissionFormat";
+ }
+ leaf beacon-band-class {
+ type int64;
+ config false;
+ description
+ "Band class for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconBandClass";
+ }
+ leaf beacon-channel-freq {
+ type uint16 {
+ range "0..2016";
+ }
+ config false;
+ description
+ "Channel number for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconChannelFreq";
+ }
+ leaf-list beacon-pn-offset {
+ type string {
+ length "0..32";
+ }
+ config false;
+ min-elements 1;
+ description
+ "{{list}} Each item is a pilot PN offset of the pilot beacon for this channel in units of 64 PN chips. If this parameter contains more than one item, then the FAP is expected to select one from the list as the PilotPN to be used for this channel. If the self-configuration capability is not to be used, then this parameter SHALL contain only a single item.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconPNOffset";
+ }
+ leaf tx-power {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "TX power for the beacon interval (in {{units}}). If self-configuration of the Beacon Tx Power is enabled, then this value is determined by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.TxPower";
+ }
+ leaf beacon-sid {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "SID for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconSID";
+ }
+ leaf beacon-nid {
+ type uint16 {
+ range "0..32767";
+ }
+ config false;
+ description
+ "NID for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconNID";
+ }
+ leaf beacon-pzid {
+ type uint64;
+ config false;
+ description
+ "PZID for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.BeaconPZID";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}.";
+ }
+
+ grouping cdma2000-beacon-hrpd-beacon-list-g {
+ description
+ "This object models individual HRPD beacon intervals where the beacon start is expressed as a number of HRPD control channel slots from the start of the beacon frame.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.Alias";
+ }
+ leaf beacon-index {
+ type int64;
+ description
+ "Instance identifier for this beacon interval. Allowed range is 0..(HRPDBeaconListNumberOfEntries-1).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.BeaconIndex";
+ }
+ leaf c-coffset {
+ type uint16 {
+ range "0..2048";
+ }
+ config false;
+ description
+ "Offset of the current beacon interval from the start of the beacon frame, in Control Channel cycles. The HRPDBeaconList interval SHOULD not overlap in time with any beacon interval for the same channel defined in the BeaconList object.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.CCoffset";
+ }
+ leaf offset {
+ type int64;
+ config false;
+ description
+ "Start of beacon transmission with respect to the Control Channel boundary.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.Offset";
+ }
+ leaf duration {
+ type uint16 {
+ range "0..256";
+ }
+ config false;
+ description
+ "Duration of the beacon transmission within a Control Channel cycle, in slots. Beacon is transmitted starting offset from the CC boundary for duration. Transmission restarts offset from the next CC boundary, given that beacon interval spans more than 1 CC cycles.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.Duration";
+ }
+ leaf num-c-ccycles {
+ type uint8 {
+ range "0..48";
+ }
+ config false;
+ description
+ "Number of Control Channel Cycles this beacon interval spans.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.NumCCcycles";
+ }
+ leaf beacon-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ config false;
+ description
+ "Band class for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.BeaconBandClass";
+ }
+ leaf beacon-channel-freq {
+ type uint16 {
+ range "0..2016";
+ }
+ config false;
+ description
+ "Channel number for this beacon interval.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.BeaconChannelFreq";
+ }
+ leaf-list beacon-pn-offset {
+ type string {
+ length "0..256";
+ }
+ config false;
+ min-elements 1;
+ description
+ "{{list}} Each item is a pilot PN offset of the pilot beacon for this channel in units of 64 PN chips. If this parameter contains more than one item, then the FAP is expected to select one from the list as the PilotPN to be used for this channel. If the self-configuration capability is not to be used, then this parameter SHALL contain only a single item.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.BeaconPNOffset";
+ }
+ leaf tx-power {
+ type int64;
+ units "dBm";
+ config false;
+ description
+ "TX power for the beacon interval. If self-configuration of the HRPD Beacon Tx Power is enabled, then this value is determined by the FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.TxPower";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}.";
+ }
+
+ grouping rem-g {
+ description
+ "This object contains parameters relating to REM (Radio Environment Measurement).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.";
+ }
+
+ grouping rem-umts-g {
+ description
+ "This object contains Radio Environment Measurement parameters for UMTS FAP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.";
+ }
+
+ grouping rem-umts-wcdma-g {
+ description
+ "This object contains parameters relating to radio environment measurement capabilities for the UMTS system.";
+ leaf in-service-handling {
+ type enumeration {
+ enum "immediate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.InServiceHandling - Immediate";
+ }
+ enum "delayed" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.InServiceHandling - Delayed";
+ }
+ }
+ default "immediate";
+ config false;
+ description
+ "FAP REM behavior with respect to ongoing active connections.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.InServiceHandling";
+ }
+ leaf scan-on-boot {
+ type boolean;
+ default "true";
+ config false;
+ description
+ "Enables or disables Radio Environment Measurement during the FAP start up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanOnBoot";
+ }
+ leaf scan-periodically {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Enable Periodic Radio Environment Measurement on all enabled RAT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanPeriodically";
+ }
+ leaf periodic-interval {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "When {{param|ScanPeriodically}} is {{true}}, this value indicates the interval in {{units}} which REM is performed while the FAP service is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.PeriodicInterval";
+ }
+ leaf periodic-time {
+ type yang:date-and-time;
+ config false;
+ description
+ "An absolute time reference in UTC to determine when the CPE will initiate the periodic REM. Each REM MUST occur at (or as soon as possible after) this reference time plus or minus an integer multiple of the {{param|PeriodicInterval}}. {{param}} is used only to set the \"phase\" of the REM. The actual value of {{param}} can be arbitrarily far into the past or future. For example, if {{param|PeriodicInterval}} is 86400 (a day) and if {{param}} is set to UTC midnight on some day (in the past, present, or future) then periodic REMs will occur every day at UTC midnight. These MUST begin on the very next midnight, even if {{param}} refers to a day in the future. The Unknown Time value defined in {{bibref|TR-106a2|Section 3.2}} indicates that no particular time reference is specified. That is, the CPE MAY locally choose the time reference, and needs only to adhere to the specified PeriodicInformInterval. If absolute time is not available to the CPE, its periodic REM behavior MUST be the same as if {{param}} parameter was set to the Unknown Time value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.PeriodicTime";
+ }
+ leaf-list remplmn-list {
+ type string;
+ config false;
+ max-elements "32";
+ description
+ "{{list}} Each item is a PLMN ID to measure. PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. If {{empty}}, then no specific PLMN ID is provided, meaning that the FAP is required to scan all available PLMN IDs.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.REMPLMNList";
+ }
+ leaf-list rem-band-list {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "{{list}} Each item is a UMTS Band to measure. Each band is identified in by a roman numeral {{bibref|3GPP-TS.25.104}}. If {{empty}} then no specific UMTS band is provided, meaning that the FAP is required to scan all available bands. The order of the band indicator has no significance.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.REMBandList";
+ }
+ leaf-list uarfcndl-list {
+ type string;
+ config false;
+ max-elements "64";
+ description
+ "{{list}} Each entry is a UARFCN in the DL direction to measure. If {{empty}}, then no specific UARFCN is provided, meaning that the FAP is required to scan all UARFCNs that it is aware of.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.UARFCNDLList";
+ }
+ leaf scan-timeout {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Specifies the time-out value in {{units}}, measured from the start of the REM scan, before the REM scan will time out.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanTimeout";
+ }
+ leaf scan-status {
+ type enumeration {
+ enum "indeterminate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanStatus - Indeterminate";
+ }
+ enum "in-progress" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanStatus - InProgress";
+ }
+ enum "success" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanStatus - Success";
+ }
+ enum "error" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanStatus - Error";
+ }
+ enum "error-timeout" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanStatus - Error_TIMEOUT";
+ }
+ }
+ description
+ "Indicates the current status of this scan.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ScanStatus";
+ }
+ leaf error-details {
+ type string {
+ length "0..256";
+ }
+ description
+ "Provides more detail when the {{param|ScanStatus}} is either {{enum|Error|ScanStatus}} or {{enum|Error_TIMEOUT|ScanStatus}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.ErrorDetails";
+ }
+ leaf last-scan-time {
+ type yang:date-and-time;
+ description
+ "The time of the last UMTS system radio environment measurement.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.LastScanTime";
+ }
+ leaf max-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.UMTS.WCDMA.Cell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.MaxCellEntries";
+ }
+ leaf cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.CellNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.";
+ }
+
+ grouping rem-umts-wcdma-cell-g {
+ leaf rem-umts-wcdma-cell-key {
+ type string;
+ description
+ "Key value for this object, which could be an item of a list.";
+ }
+ description
+ "Table indicating the components of the discovered cells.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.";
+ }
+
+ grouping rem-umts-wcdma-cell-rf-g {
+ description
+ "Table indicating the RF aspect of the discovered cells.";
+ leaf uarfcndl {
+ type uint16 {
+ range "0..16383";
+ }
+ description
+ "The UTRA Absolute Radio Frequency Channel Number (UARFCN) in the DL direction of an FDD mode cell. {{bibref|3GPP-TS.25.433}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.UARFCNDL";
+ }
+ leaf cpichrscp {
+ type int64;
+ units "dBm";
+ description
+ "Received signal level in {{units}} of the CPICH channel. (Ref. 3GPP TS 25.133)";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.CPICHRSCP";
+ }
+ leaf cpich-ec-no {
+ type int64;
+ units "dB";
+ description
+ "Measured EcNo. (energy per chip to interference power density) in {{units}} received in the downlink pilot channel. Actual values of the range are -24.0 {{units}} to 0.0 {{units}} in steps of 0.5 {{units}}. The value of {{param}} divided by 2 yields the actual value of the range. {{bibref|3GPP-TS.25.133|Section 9.1.2.3}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.CPICHEcNo";
+ }
+ leaf rssi {
+ type int64;
+ units "dBm";
+ description
+ "This measurement is for Inter-frequency handover evaluation, measured in total {{units}} in the band. {{bibref|3GPP-TS.25.133|Section9.1.3}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.RSSI";
+ }
+ leaf primary-scrambling-code {
+ type uint16 {
+ range "0..511";
+ }
+ description
+ "Primary scrambling code.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.PrimaryScramblingCode";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.RF.";
+ }
+
+ grouping rem-umts-wcdma-cell-bcch-g {
+ description
+ "Table containing the system information broadcast in the BCCH logical channel.";
+ leaf plmn-type {
+ type enumeration {
+ enum "gsm-map" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.PLMNType - GSM-MAP";
+ }
+ enum "ansi-41" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.PLMNType - ANSI-41";
+ }
+ }
+ description
+ "Type of Public Land Mobile Network (PLMN).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.PLMNType";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.PLMNID";
+ }
+ leaf lac {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Location Area Code (LAC) as defined in SIB 1 {{bibref|3GPP-TS.25.331}}. The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the LAI (Location Area ID) {{bibref|3GPP-TS.23.003}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "Routing Area Code (RAC) as defined in SIB 1 {{bibref|3GPP-TS.25.331}}. The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the RAI (Routing Area ID) {{bibref|3GPP-TS.23.003}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.RAC";
+ }
+ leaf cell-id {
+ type uint32 {
+ range "0..268435455";
+ }
+ description
+ "Cell Identity as defined in SIB3 {{bibref|3GPP-TS.25.331|Section10.3.2.2}}. {{bibref|3GPP-TS.24.008}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CellID";
+ }
+ leaf pcpich-tx-power {
+ type int64;
+ description
+ "Primary Common Pilot Channel (CPICH) power level on SIB 5/6 {{bibref|3GPP-TS.25.331|Section10.3.6.55}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.PCPICHTxPower";
+ }
+ leaf csg-indicator {
+ type boolean;
+ description
+ "The CSG-indicator Information Element (IE) in the Master Information Block reflects the access mode of the CSG cell. It is hence dependent on the value of {{param|.AccessMgmt.UMTS.AccessMode}}. If {{true}} the CSG-indicator IE is present, reflecting closed access to the CSG cell. If {{false}} the CSG-indicator IE is absent, reflecting the access mode as \"not a closed-access\". {{bibref|3GPP-TS.25.331|Section 10.2.48.8.1}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGIndicator";
+ }
+ leaf csgid {
+ type uint32 {
+ range "0..134217727";
+ }
+ description
+ "Defines the Closed Subscriber Group of the Access Control List. FAP broadcasts this CSG ID in SIB3 {{bibref|3GPP-TS.25.331|Section10.3.2.8}} depending on the AccessMode.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGID";
+ }
+ leaf-list uarfcndl-list {
+ type uint16 {
+ range "0..16383";
+ }
+ max-elements "128";
+ description
+ "{{list}} Each item is a UTRA Absolute Radio Frequency Channel Number (UARFCN} in the DL direction dedicated to the CSG cells. {{param}} is broadcast in SIB 11bis {{bibref|3GPP-TS.25.331|Section 10.2.48.8.14a}}. The corresponding UTRA Absolute Radio Frequency Channel Number (UARFCN} in the UL direction is derived based on the fixed offset applicable for the frequency band.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.UARFCNDLList";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.";
+ }
+
+ grouping rem-umts-wcdma-cell-bcch-csgpsc-split-info-g {
+ description
+ "This object contains parameters relating to the Primary Scambling Code (PSC) split information for the CSG. Defined in SIB3/11bis {{bibref|3GPP-TS.25.331|Section 10.3.2.8 and 10.3.2.9}}.";
+ leaf start-psc-range1-coefficient {
+ type uint8 {
+ range "0..63";
+ }
+ description
+ "The value of this Information Element (IE) multiplied by 8 specifies the start PSC value of the first PSC range as specified in {{bibref|3GPP-TS.25.331|Section 8.6.2.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.StartPSCRange1Coefficient";
+ }
+ leaf number-of-ps-cs {
+ type enumeration {
+ enum "5" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 5";
+ }
+ enum "10" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 10";
+ }
+ enum "15" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 15";
+ }
+ enum "20" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 20";
+ }
+ enum "30" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 30";
+ }
+ enum "40" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 40";
+ }
+ enum "50" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 50";
+ }
+ enum "64" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 64";
+ }
+ enum "80" {
+ value 9;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 80";
+ }
+ enum "120" {
+ value 10;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 120";
+ }
+ enum "160" {
+ value 11;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 160";
+ }
+ enum "256" {
+ value 12;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - 256";
+ }
+ enum "alltherest" {
+ value 13;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - alltherest";
+ }
+ enum "spare3" {
+ value 14;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - spare3";
+ }
+ enum "spare2" {
+ value 15;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - spare2";
+ }
+ enum "spare1" {
+ value 16;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs - spare1";
+ }
+ }
+ description
+ "This Information Element (IE) specifies the number of PSCs reserved for CSG cells in each PSC range.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.NumberOfPSCs";
+ }
+ leaf psc-range2-offset {
+ type uint8 {
+ range "0..63";
+ }
+ description
+ "If this Information Element (IE) is included, the UE shall calculate the second PSC range as specified in {{bibref|3GPP-TS.25.331|Section 8.6.2.4}}. If this Information Element (IE) is not included, the UE shall consider the second PSC range to be not present.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.PSCRange2Offset";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.CSGPSCSplitInfo.";
+ }
+
+ grouping rem-umts-wcdma-cell-bcch-reference-position-g {
+ description
+ "This object defines parameters related to the surface point of the ellipsoid. {{bibref|3GPP-TS.23.032|Section 5}} It is characterized by the co-ordinates of an ellipsoid point with altitude, distances, and an angle of orientation. This information is used to refer to a point on the Earth's surface, or close to the Earth's surface, with the same longitude and latitude.";
+ leaf latitude {
+ type int64;
+ description
+ "This parameter specifies the latitude of the device's position in degrees, multiplied by 1 million. The positive value signifies the direction, north of the equator. The negative value signifies the direction, south of the equator. Range is from: 90.00.00' South (-90,000,000) to 90.00.00' North (90,000,000). Example: A latitude of 13.19.43' N would be represented as 13,323,833, derived as (13*1,000,000)+((19.43*1,000,000)/60). Latitude of 50.00.00' S would be represented as value -50,000,000. If 0 then SIB15 is not detected in the specific cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.Latitude";
+ }
+ leaf longitude {
+ type int64;
+ description
+ "This parameter specifies the longitude of the device's position in degrees, multiplied by 1 million. The positive value signifies the direction, east of the prime meridian. The negative value signifies the direction, west of the prime meridian. Range is from: 180.00.00' West (-180,000,000) to 180.00.00' East (180,000,000). Example: A longitude of 13.19.43' E would be represented as 13,323,833, derived as (13*1,000,000)+((19.43*1,000,000)/60). A longitude of 50.00'0'' W would be represented as value -50,000,000. If 0 then SIB15 is not detected in the specific cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.Longitude";
+ }
+ leaf uncertainty-semi-major {
+ type uint8 {
+ range "0..127";
+ }
+ description
+ "The uncertainty r is derived from the \"uncertainty code\" k by r = 10 x ( 1.1 <power> (k-1) ) {{bibref|3GPP-TS.23.032|Section6.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.UncertaintySemiMajor";
+ }
+ leaf uncertainty-semi-minor {
+ type uint8 {
+ range "0..127";
+ }
+ description
+ "The uncertainty r is derived from the \"uncertainty code\" k by r = 10 x ( 1.1 <power> (k-1) ) {{bibref|3GPP-TS.23.032|Section6.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.UncertaintySemiMinor";
+ }
+ leaf orientation-of-major-axis {
+ type uint8 {
+ range "0..89";
+ }
+ description
+ "The Information Element (IE) value 'N' is derived by this formula: 2N <= a < 2(N+1) Where 'a' is the orientation in degrees (0..179).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.OrientationOfMajorAxis";
+ }
+ leaf confidence {
+ type uint8 {
+ range "0..100";
+ }
+ units "percent";
+ description
+ "The degree of confidence in the ellipsoid's points expressed in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.Confidence";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.WCDMA.Cell.{i}.BCCH.ReferencePosition.";
+ }
+
+ grouping rem-umts-gsm-g {
+ description
+ "This object contains parameters relating to GSM REM capabilities.";
+ leaf in-service-handling {
+ type enumeration {
+ enum "immediate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.InServiceHandling - Immediate";
+ }
+ enum "delayed" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.InServiceHandling - Delayed";
+ }
+ }
+ default "immediate";
+ config false;
+ description
+ "FAP REM behavior with respect to ongoing active connections.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.InServiceHandling";
+ }
+ leaf scan-on-boot {
+ type boolean;
+ default "true";
+ config false;
+ description
+ "Enables or disables Radio Environment Measurement during the FAP start up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanOnBoot";
+ }
+ leaf scan-periodically {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Enable Periodic Radio Environment Measurement on all enabled RAT.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanPeriodically";
+ }
+ leaf periodic-interval {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "When {{param|ScanPeriodically}} is {{true}}, this value indicates the interval in {{units}} which REM is performed while the FAP service is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.PeriodicInterval";
+ }
+ leaf periodic-time {
+ type yang:date-and-time;
+ config false;
+ description
+ "An absolute time reference in UTC to determine when the CPE will initiate the periodic REM. Each REM MUST occur at (or as soon as possible after) this reference time plus or minus an integer multiple of the {{param|PeriodicInterval}}. {{param}} is used only to set the \"phase\" of the REM. The actual value of {{param}} can be arbitrarily far into the past or future. For example, if {{param|PeriodicInterval}} is 86400 (a day) and if {{param}} is set to UTC midnight on some day (in the past, present, or future) then periodic REMs will occur every day at UTC midnight. These MUST begin on the very next midnight, even if {{param}} refers to a day in the future. The Unknown Time value defined in {{bibref|TR-106a2|Section 3.2}} indicates that no particular time reference is specified. That is, the CPE MAY locally choose the time reference, and needs only to adhere to the specified PeriodicInformInterval. If absolute time is not available to the CPE, its periodic REM behavior MUST be the same as if {{param}} parameter was set to the Unknown Time value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.PeriodicTime";
+ }
+ leaf-list remplmn-list {
+ type string {
+ length "0..6";
+ }
+ config false;
+ description
+ "{{list}} Each item is a PLMNID. PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of the PLMNID is 5. If {{empty}} no specific PLMN ID is provided, meaning that the FAP is required to report all available PLMN IDs. If a list is provided, the FAP is expected to limit the REM measurement to the PLMN(s) specified in this list only and ignore others even if they are detected.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMPLMNList";
+ }
+ leaf-list rem-band-list {
+ type enumeration {
+ enum "t-gsm380" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - T-GSM380";
+ }
+ enum "t-gsm410" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - T-GSM410";
+ }
+ enum "gsm450" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - GSM450";
+ }
+ enum "gsm480" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - GSM480";
+ }
+ enum "gsm710" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - GSM710";
+ }
+ enum "gsm750" {
+ value 6;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - GSM750";
+ }
+ enum "t-gsm810" {
+ value 7;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - T-GSM810";
+ }
+ enum "gsm850" {
+ value 8;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - GSM850";
+ }
+ enum "p-gsm900" {
+ value 9;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - P-GSM900";
+ }
+ enum "e-gsm900" {
+ value 10;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - E-GSM900";
+ }
+ enum "r-gsm900" {
+ value 11;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - R-GSM900";
+ }
+ enum "t-gsm900" {
+ value 12;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - T-GSM900";
+ }
+ enum "dcs1800" {
+ value 13;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - DCS1800";
+ }
+ enum "pcs1900" {
+ value 14;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList - PCS1900";
+ }
+ }
+ config false;
+ description
+ "{{list}} Each item is a GSM Band to measure. {{enum}} If {{empty}} then no specific GSM band is provided, meaning that the FAP MUST scan all bands. If a list is provided, the FAP is expected to limit the REM measurement to the band(s) specified in this list only and ignore others even if they are detected.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.REMBandList";
+ }
+ leaf-list arfcn-list {
+ type string;
+ config false;
+ max-elements "64";
+ description
+ "{{list}} Each item is a GSM ARFCN to measure. If {{empty}} then no specific ARFCN is provided, meaning that the FAP is required to scan all ARFCNs. If a list is provided, the FAP is expected to limit the REM measurement to the ARFCN(s) specified in this list only and ignore others even if they are detected.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ARFCNList";
+ }
+ leaf scan-timeout {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Specifies the time-out value in {{units}}, measured from the start of the REM scan, before the REM scan will time out.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanTimeout";
+ }
+ leaf scan-status {
+ type enumeration {
+ enum "indeterminate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanStatus - Indeterminate";
+ }
+ enum "in-progress" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanStatus - InProgress";
+ }
+ enum "success" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanStatus - Success";
+ }
+ enum "error" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanStatus - Error";
+ }
+ enum "error-timeout" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanStatus - Error_TIMEOUT";
+ }
+ }
+ description
+ "Indicates the current status of this scan.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ScanStatus";
+ }
+ leaf error-details {
+ type string {
+ length "0..256";
+ }
+ description
+ "Provides more detail when the {{param|ScanStatus}} is either {{enum|Error|ScanStatus}} or {{enum|Error_TIMEOUT|ScanStatus}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.ErrorDetails";
+ }
+ leaf last-scan-time {
+ type yang:date-and-time;
+ description
+ "The time of the last GSM radio environment measurement.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.LastScanTime";
+ }
+ leaf max-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries allowed in the {{object|.REM.UMTS.GSM.Cell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.MaxCellEntries";
+ }
+ leaf cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.CellNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.";
+ }
+
+ grouping rem-umts-gsm-cell-g {
+ description
+ "Table indicating the components of the discovered cells.";
+ leaf band-indicator {
+ type enumeration {
+ enum "gsm 850" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.BandIndicator - GSM 850";
+ }
+ enum "gsm 900" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.BandIndicator - GSM 900";
+ }
+ enum "dcs 1800" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.BandIndicator - DCS 1800";
+ }
+ enum "pcs 1900" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.BandIndicator - PCS 1900";
+ }
+ }
+ description
+ "Indicates how to interpret the BCCH ARFCN.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.BandIndicator";
+ }
+ leaf arfcn {
+ type uint16 {
+ range "0..1023";
+ }
+ description
+ "Absolute Radio Frequency Channel Number (ARFCN) {{bibref|3GPP-TS.05.05}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.ARFCN";
+ }
+ leaf bsic {
+ type uint8 {
+ range "0..63";
+ }
+ description
+ "Base Station Identity Code {{bibref|3GPP-TS.03.03}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.BSIC";
+ }
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of the PLMNID is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.PLMNID";
+ }
+ leaf lac {
+ type uint16 {
+ range "1..65535";
+ }
+ description
+ "Location Area Code (LAC) as defined in SIB1 {{bibref|3GPP-TS.25.331}}. The concatenation of PLMN ID (MCC+MNC) and LAC uniquely identifies the LAI (Location Area ID) {{bibref|3GPP-TS.23.003}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.LAC";
+ }
+ leaf rac {
+ type uint8 {
+ range "0..255";
+ }
+ description
+ "Routing Area Code (RAC) consists of up to 3 numerical characters. The concatenation of PLMN ID (MCC+MNC), LAC, and RAC uniquely identifies the Routing Area ID (RAI). {{bibref|3GPP-TS.23.003|Section 4.2}} {{bibref|3GPP-TS.25.413|Section 9.2.3.7}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.RAC";
+ }
+ leaf ci {
+ type uint16 {
+ range "0..63535";
+ }
+ description
+ "Cell Identity. {{bibref|3GPP-TS.25.331|Section 10.3.2.2}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.CI";
+ }
+ leaf rssi {
+ type int64;
+ units "dBm";
+ description
+ "Received signal level in {{units}} of the BCCH carrier.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.RSSI";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.UMTS.GSM.Cell.{i}.";
+ }
+
+ grouping rem-lte-g {
+ description
+ "This object contains parameters relating to radio environment measurement capabilities for the LTE system.";
+ leaf in-service-handling {
+ type enumeration {
+ enum "immediate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.InServiceHandling - Immediate";
+ }
+ enum "delayed" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.InServiceHandling - Delayed";
+ }
+ }
+ default "immediate";
+ config false;
+ description
+ "FAP REM behavior with respect to ongoing active connections.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.InServiceHandling";
+ }
+ leaf scan-on-boot {
+ type boolean;
+ default "true";
+ config false;
+ description
+ "Enables or disables Radio Environment Measurement during the FAP start up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanOnBoot";
+ }
+ leaf scan-periodically {
+ type boolean;
+ default "false";
+ config false;
+ description
+ "Enable Periodic Radio Environment Measurement on LTE EUTRAN bands.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanPeriodically";
+ }
+ leaf periodic-interval {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "When {{param|ScanPeriodically}} is {{true}}, this value indicates the interval in {{units}} which REM is performed while the FAP service is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.PeriodicInterval";
+ }
+ leaf periodic-time {
+ type yang:date-and-time;
+ config false;
+ description
+ "An absolute time reference in UTC to determine when the CPE will initiate the periodic REM. Each REM MUST occur at (or as soon as possible after) this reference time plus or minus an integer multiple of the {{param|PeriodicInterval}}. {{param}} is used only to set the \"phase\" of the REM. The actual value of {{param}} can be arbitrarily far into the past or future. For example, if {{param|PeriodicInterval}} is 86400 (a day) and if {{param}} is set to UTC midnight on some day (in the past, present, or future) then periodic REMs will occur every day at UTC midnight. These MUST begin on the very next midnight, even if {{param}} refers to a day in the future. The Unknown Time value defined in {{bibref|TR-106a2|Section 3.2}} indicates that no particular time reference is specified. That is, the CPE MAY locally choose the time reference, and needs only to adhere to the specified PeriodicInformInterval. If absolute time is not available to the CPE, its periodic REM behavior MUST be the same as if {{param}} parameter was set to the Unknown Time value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.PeriodicTime";
+ }
+ leaf-list remplmn-list {
+ type string;
+ config false;
+ max-elements "32";
+ description
+ "{{list}} Each item is a PLMN ID to measure. PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. If {{empty}}, then no specific PLMN ID is provided, meaning that the FAP is required to scan all available PLMN IDs.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.REMPLMNList";
+ }
+ leaf-list rem-band-list {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "{{list}} Each item is a LTE Band to measure. Corresponds to frequency band indicator defined in {{bibref|3GPP-TS.36.101|Table 5.5-1}}. If {{empty}} then no specific LTE band is provided, meaning that the FAP is required to scan all available bands. The order of the band indicator has no significance.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.REMBandList";
+ }
+ leaf-list eutra-carrier-arfcndl-list {
+ type string;
+ config false;
+ max-elements "64";
+ description
+ "{{list}} Each entry is a EUTRA ARFCN in the DL direction to measure. Corrsponds to the parameter NDL in {{bibref|3GPP-TS.36.101|Section 5.7.3}}. If {{empty}}, then no specific EUTRA ARFCN is provided, meaning that the FAP is required to scan all ARFCNs that it is aware of.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.EUTRACarrierARFCNDLList";
+ }
+ leaf scan-timeout {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Specifies the time-out value in {{units}}, measured from the start of the REM scan, before the REM scan will time out.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanTimeout";
+ }
+ leaf scan-status {
+ type enumeration {
+ enum "indeterminate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanStatus - Indeterminate";
+ }
+ enum "in-progress" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanStatus - InProgress";
+ }
+ enum "success" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanStatus - Success";
+ }
+ enum "error" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanStatus - Error";
+ }
+ enum "error-timeout" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanStatus - Error_TIMEOUT";
+ }
+ }
+ description
+ "Indicates the current status of this scan.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ScanStatus";
+ }
+ leaf error-details {
+ type string {
+ length "0..256";
+ }
+ description
+ "Provides more detail when the {{param|ScanStatus}} is either {{enum|Error|ScanStatus}} or {{enum|Error_TIMEOUT|ScanStatus}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.ErrorDetails";
+ }
+ leaf last-scan-time {
+ type yang:date-and-time;
+ description
+ "The time of the last LTE system radio environment measurement.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.LastScanTime";
+ }
+ leaf max-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.LTE.Cell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.MaxCellEntries";
+ }
+ leaf cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CellNumberOfEntries";
+ }
+ leaf max-carrier-meas-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.LTE.CarrierMeas.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.MaxCarrierMeasEntries";
+ }
+ leaf carrier-meas-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeasNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.";
+ }
+
+ grouping rem-lte-cell-g {
+ leaf rem-lte-cell-key {
+ type string;
+ description
+ "Key value for this object, which could be an item of a list.";
+ }
+ description
+ "Table indicating the components of the discovered cells.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.";
+ }
+
+ grouping rem-lte-cell-rf-g {
+ description
+ "Table indicating the RF aspect of the discovered cells.";
+ leaf eutra-carrier-arfcn {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Indicates the ARFCN of this carrier frequency. Corresponds to parameter dl-CarrierFreq in SIB5 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}, and parameter NDL in {{bibref|3GPP-TS.36.101|Section 5.7.3}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.RF.EUTRACarrierARFCN";
+ }
+ leaf phy-cell-id {
+ type uint16 {
+ range "0..503";
+ }
+ description
+ "Physical cell ID of the detected EUTRAN cell, as specified in {{bibref|3GPP-TS.36.101|Section 5.6}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.RF.PhyCellID";
+ }
+ leaf rsrp {
+ type int64;
+ units "dBm";
+ description
+ "Received RSRP level of the detected EUTRA cell, specified in {{units}}, as specified in {{bibref|3GPP-TS.36.214|Section 5.1.1}}. The reporting range is specified in {{bibref|3GPP-TS.36.133|Section 9.1.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.RF.RSRP";
+ }
+ leaf rsrq {
+ type int64;
+ units "dB";
+ description
+ "Received RSRQ level of the detected EUTRA cell, specified in {{units}}, as specified in {{bibref|3GPP-TS.36.214|Section 5.1.3}}. Actual measured values range between -24.0 {{units}} and 0.0 {{units}} in steps of 0.5 {{units}}. The value of {{param}} divided by 10 yields the actual measured value. Only values in multiple of 5 are valid.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.RF.RSRQ";
+ }
+ leaf rssi {
+ type int64;
+ units "dBm";
+ description
+ "E-UTRA Carrier Received Signal Strength Indicator (RSSI), specified in {{units}}, as specified in {{bibref|3GPP-TS.36.214|Section 5.1.3}}. It comprises the linear average of the total received power (in [W]) observed only in OFDM symbols containing reference symbols for antenna port 0, in the measurement bandwidth, over N number of resource blocks by the UE from all sources, including co-channel serving and non-serving cells, adjacent channel interference, thermal noise etc.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.RF.RSSI";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.RF.";
+ }
+
+ grouping rem-lte-cell-bcch-g {
+ description
+ "Table containing the system information broadcast in the BCCH logical channel.";
+ leaf dl-bandwidth {
+ type uint8 {
+ range "0 | 5 | 6 | 15 | 25 | 50 | 75 | 100";
+ }
+ units "resource blocks";
+ description
+ "Downlink transmission bandwidth, specified in number of {{units}}. Corresponds to parameter dl_Bandwidth in Master Information Block in {{bibref|3GPP-TS.36.331|Section 6.2.2}}. and to parameter NRB in {{bibref|3GPP-TS.36.101|Table 5.6-1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.DLBandwidth";
+ }
+ leaf ul-bandwidth {
+ type uint8 {
+ range "0 | 5 | 6 | 15 | 25 | 50 | 75 | 100";
+ }
+ units "resource blocks";
+ description
+ "Uplink transmission bandwidth, specified in number of {{units}}. Corresponds to parameter ul_Bandwidth in SIB2 in {{bibref|3GPP-TS.36.331|Section 6.3.1}}. and to parameter NRB in {{bibref|3GPP-TS.36.101|Table 5.6-1}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.ULBandwidth";
+ }
+ leaf rs-tx-power {
+ type int64;
+ units "dBm";
+ description
+ "The downlink reference-signal transmit power, specified in {{units}}. Defined as the linear average over the power contributions (in W) of all resource elements that carry cell-specific reference signals within the operating system bandwidth. Corresponds to parameter referenceSignalPower in SIB4 as a part of PDSCH-Config IE in {{bibref|3GPP-TS.36.331|Section 6.3.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.RSTxPower";
+ }
+ leaf tac {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "Tracking Area Code that is common for all the PLMNs listed. Corresponds to trackingAreaCode as specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.TAC";
+ }
+ leaf cell-id {
+ type uint32 {
+ range "0..268435455";
+ }
+ description
+ "Defines the cell identify, defines as a 28-bit binary number. Corresponds to cellIdentity as specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2 and Section 6.3.4}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.CellID";
+ }
+ leaf cell-barred {
+ type boolean;
+ description
+ "Indicates whether the cell is barred or not. If {{true}}, the cell is barred. If {{false}}, the cell is not barred. Corresponds to cellBarred as specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}} and {{bibref|3GPP-TS.36.304}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.CellBarred";
+ }
+ leaf csg-indication {
+ type boolean;
+ description
+ "Indicates whether CSG is used in this cell or not. If {{true}}, the UE is only allowed to access the cell if the CSG identity matches an entry in the allowed CSG list that the UE has stored. Corresponds to csg-Indication as specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.CSGIndication";
+ }
+ leaf csg-identity {
+ type uint32 {
+ range "0..134217727";
+ }
+ description
+ "Defines the CSG ID value if {{param|CSGIndication}} parameter indicates that CSG is used in this cell. Corresponds to csg-Identity as specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.CSGIdentity";
+ }
+ leaf max-plmn-list-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.LTE.Cell.{i}.BCCH.PLMNList.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.MaxPLMNListEntries";
+ }
+ leaf plmn-list-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.PLMNListNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.";
+ }
+
+ grouping rem-lte-cell-bcch-plmn-list-g {
+ description
+ "Table containing the PLMN list in the system information broadcast in the BCCH logical channel. Correspnds to plmn-IdentityList as specified in SIB1 in {{bibref|3GPP-TS.36.331|Section 6.2.2}}. Each instance in this object is a PLMN-IdentityInfo which consists of plmn-Identity and cellReservedForOperatorUse IEs.";
+ leaf plmnid {
+ type string {
+ length "0..6";
+ }
+ description
+ "PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) {{bibref|3GPP-TS.23.003}}, {{bibref|3GPP-TS.24.008}}. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of {{param}} is 5.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.PLMNList.{i}.PLMNID";
+ }
+ leaf cell-reserved-for-operator-use {
+ type boolean;
+ description
+ "Indicates whether the cell is reserved for operator use or not. If {{true}}, it is reserved. If {{false}}, it is not reserved. Corresponds to \"reserved\" \"notReserved\" respectively as defined in PLMN-IdentityInfo in {{bibref|3GPP-TS.36.331|Section 6.2.2}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.PLMNList.{i}.CellReservedForOperatorUse";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.Cell.{i}.BCCH.PLMNList.{i}.";
+ }
+
+ grouping rem-lte-carrier-meas-g {
+ description
+ "Table indicating the measurement of the discovered carrier. The information stored in this object is strictly in the physical layer level and may not necessarily be associated with any particular E-UTRAN cell (e.g. interference level generated by sources other than E-UTRAN cell).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the CarrierMeas entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeas.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeas.{i}.Alias";
+ }
+ leaf carrier-arfcndl {
+ type int64;
+ units "MHz";
+ description
+ "Lower bound of the EUTRA ARFCN as specified in {{bibref|3GPP-TS.36.101|Section 5.7.3}} in the DL direction that is requested to measure. Unit in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeas.{i}.CarrierARFCNDL";
+ }
+ leaf carrier-ch-width {
+ type int64;
+ units "ARFCN";
+ description
+ "Number of {{units}} in DL direction, as specified in {{bibref|3GPP-TS.36.101|Section 5.6}}, that is requested to measure. The range bounded by {{param|CarrierARFCNDL}} as the lower bound and the value of ({{param|CarrierARFCNDL}} + {{param}}) as the upper bound expresses the total carrier frequency range to be measured.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeas.{i}.CarrierChWidth";
+ }
+ leaf carrier-rssi {
+ type int64;
+ units "ARFCN";
+ description
+ "Received Signal Strength Indicator (RSSI) as specified in {{bibref|3GPP-TS.36.214|Sec 5.1.3}} over the carrier frequency range from {{param|CarrierARFCNDL}} as the lower bound and the value of ({{param|CarrierARFCNDL}} + {{param|CarrierChWidth}}) as the upper bound.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeas.{i}.CarrierRSSI";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.LTE.CarrierMeas.{i}.";
+ }
+
+ grouping rem-cdma2000-g {
+ description
+ "This object contains parameters relating to radio environment measurement capabilities for the CDMA2000 system.";
+ leaf in-service-handling {
+ type enumeration {
+ enum "immediate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.InServiceHandling - Immediate";
+ }
+ enum "delayed" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.InServiceHandling - Delayed";
+ }
+ }
+ config false;
+ description
+ "FAP REM behavior with respect to ongoing active connections. {{enum}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.InServiceHandling";
+ }
+ leaf scan-on-boot {
+ type boolean;
+ config false;
+ description
+ "Enables or disables Radio Environment Measurement during the FAP start up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanOnBoot";
+ }
+ leaf scan-now {
+ type boolean;
+ config false;
+ description
+ "Directs FAP to perform radio environment measurements immediately (but respecting the setting of {{param|InServiceHandling}}) and report back. After performing the action, the FAP resets the ScanNow value to \"0\" ({{false}}).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanNow";
+ }
+ leaf return-timer {
+ type uint64 {
+ range "1..max";
+ }
+ units "seconds";
+ config false;
+ description
+ "Time in {{units}} within which the action should be performed by the FAP. Only applies if {{param|InServiceHandling}} is set to Delayed.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ReturnTimer";
+ }
+ leaf scan-periodically {
+ type boolean;
+ config false;
+ description
+ "Enables periodic reporting of radio environment measurements.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanPeriodically";
+ }
+ leaf periodic-interval {
+ type uint64 {
+ range "1..max";
+ }
+ units "seconds";
+ config false;
+ description
+ "When {{param|ScanPeriodically}} is {{true}}, this value indicates the interval in {{units}} which REM is performed while the FAP service is enabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.PeriodicInterval";
+ }
+ leaf periodic-time {
+ type yang:date-and-time;
+ config false;
+ description
+ "An absolute time reference in UTC to determine when the CPE will initiate the periodic REM. Each REM MUST occur at (or as soon as possible after) this reference time plus or minus an integer multiple of the {{param|PeriodicInterval}}. {{param}} is used only to set the \"phase\" of the REM. The actual value of {{param}} can be arbitrarily far into the past or future. For example, if {{param|PeriodicInterval}} is 86400 (a day) and if {{param}} is set to UTC midnight on some day (in the past, present, or future) then periodic REMs will occur every day at UTC midnight. These MUST begin on the very next midnight, even if {{param}} refers to a day in the future. The Unknown Time value defined in {{bibref|TR-106a2|Section 3.2}} indicates that no particular time reference is specified. That is, the CPE MAY locally choose the time reference, and needs only to adhere to the specified PeriodicInformInterval. If absolute time is not available to the CPE, its periodic REM behavior MUST be the same as if {{param}} parameter was set to the Unknown Time value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.PeriodicTime";
+ }
+ leaf report-overheads {
+ type enumeration {
+ enum "all" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ReportOverheads - All";
+ }
+ enum "one-x" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ReportOverheads - OneX";
+ }
+ enum "hrpd" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ReportOverheads - HRPD";
+ }
+ enum "none" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ReportOverheads - None";
+ }
+ }
+ config false;
+ description
+ "If {{param}} is set to {{enum|All}}, the FAP shall report the overheads from the sectors as well.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ReportOverheads";
+ }
+ leaf scan-timeout {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Specifies the time-out value in {{units}}, measured from the start of the REM scan, before the REM scan will time out.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanTimeout";
+ }
+ leaf scan-status {
+ type enumeration {
+ enum "indeterminate" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanStatus - Indeterminate";
+ }
+ enum "in-progress" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanStatus - InProgress";
+ }
+ enum "success" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanStatus - Success";
+ }
+ enum "error" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanStatus - Error";
+ }
+ enum "error-timeout" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanStatus - Error_TIMEOUT";
+ }
+ }
+ description
+ "Indicates the current status of this scan.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ScanStatus";
+ }
+ leaf error-details {
+ type string {
+ length "0..256";
+ }
+ description
+ "Provides more detail when the {{param|ScanStatus}} is either \"Error\" or \"Error_TIMEOUT\".";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.ErrorDetails";
+ }
+ leaf last-scan-time {
+ type yang:date-and-time;
+ description
+ "The time of the last system radio environment measurement.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.LastScanTime";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.";
+ }
+
+ grouping rem-cdma2000-one-x-g {
+ description
+ "This object contains parameters relating to radio environment measurement capabilities for the 1x system.";
+ leaf max-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.CDMA2000.OneX.Cell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.MaxCellEntries";
+ }
+ leaf cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.CellNumberOfEntries";
+ }
+ leaf max-channel-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.CDMA2000.OneX.Channel.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.MaxChannelEntries";
+ }
+ leaf channel-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.ChannelNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.";
+ }
+
+ grouping rem-cdma2000-one-x-channel-g {
+ description
+ "REM specific configuration and reporting.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.Alias";
+ }
+ leaf sniffing-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ description
+ "Config parameter to set band class. Reference - {{bibref|3GPP2-C.S0057}}, Band Class Specification for CDMA2000 Spread Spectrum Systems.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.SniffingBandClass";
+ }
+ leaf sniffing-channel-number {
+ type uint16 {
+ range "0..2016";
+ }
+ description
+ "The Radio Frequency Channel Number (RFCN) in the forward direction.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.SniffingChannelNumber";
+ }
+ leaf-list pn-list {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "{{list}} Each item is a (single value) PN offset in units of 64 PN chips or PNrange expressed in the following format: <Start-value>\"..\"<End-value>:<Increment> If an empty string, then no specific PNList is provided, meaning that the FAP is required to pick a PN list to scan on its own.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.PNList";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}.";
+ }
+
+ grouping rem-cdma2000-one-x-cell-g {
+ leaf rem-cdma2000-one-x-cell-key {
+ type string;
+ description
+ "Key value for this object, which could be an item of a list.";
+ }
+ description
+ "Table indicating the components of the discovered cells.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.";
+ }
+
+ grouping rem-cdma2000-one-x-cell-rf-g {
+ description
+ "RF REM results for each detected cell.";
+ leaf band {
+ type int64;
+ description
+ "CDMA band for the reported cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.Band";
+ }
+ leaf rfcnfl {
+ type uint16 {
+ range "0..2016";
+ }
+ description
+ "The Radio Frequency Channel Number (RFCN) in the FL direction for the reported cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.RFCNFL";
+ }
+ leaf io {
+ type int64;
+ units "dBm";
+ description
+ "The total received power spectral density in {{units}}, including signal and interference.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.Io";
+ }
+ leaf p-ilot-pn {
+ type uint16 {
+ range "0..511";
+ }
+ units "64 PN chips";
+ description
+ "Pilot PN Offset (in units of {{units}}).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.PIlotPN";
+ }
+ leaf p-ilot-pn-phase {
+ type uint64;
+ units "chips";
+ description
+ "Pilot PN phase in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.PIlotPNPhase";
+ }
+ leaf pilot-strength-ecp {
+ type int64;
+ units "dBm";
+ description
+ "The strength estimate of the received pilot energy per chip, Ecp, in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.PilotStrengthEcp";
+ }
+ leaf pilot-strength-ecp-io {
+ type int64;
+ units "dB";
+ description
+ "The strength estimate of the received pilot energy per chip, Ecp, to total received spectral density, Io (signal and noise) in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.PilotStrengthEcpIo";
+ }
+ leaf overheads-available {
+ type boolean;
+ description
+ "If set to {{true}}, the overhead messages for this particular cell is included in {{object|.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.OverheadsAvailable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.RF.";
+ }
+
+ grouping rem-cdma2000-one-x-cell-control-channel-g {
+ description
+ "Table containing information broadcast on control channel.";
+ leaf sid {
+ type int64;
+ description
+ "System identification. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.SID";
+ }
+ leaf nid {
+ type int64;
+ description
+ "Network identification. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.NID";
+ }
+ leaf regzone {
+ type int64;
+ description
+ "Registration Zone. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.REGZONE";
+ }
+ leaf baselat {
+ type int64;
+ description
+ "Basestation latitude. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.BASELAT";
+ }
+ leaf baselong {
+ type int64;
+ description
+ "Basestation longtitude. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.BASELONG";
+ }
+ leaf mcc {
+ type int64;
+ description
+ "Mobile Country Code. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.MCC";
+ }
+ leaf mncimsi1112 {
+ type int64;
+ description
+ "the 11th and 12th digits of IMSI, i.e., Mobile Network Code. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.MNCIMSI1112";
+ }
+ leaf baseid {
+ type int64;
+ description
+ "Basestation identification. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.BASEID";
+ }
+ leaf apid {
+ type string {
+ length "0..32";
+ }
+ description
+ "Access Point Identification. Set to empty string if not available. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.APID";
+ }
+ leaf apidmask {
+ type int64;
+ description
+ "Access Point Identification Mask. Set to zero if not available. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.APIDMASK";
+ }
+ leaf apidtext {
+ type string {
+ length "0..256";
+ }
+ description
+ "Access Point Identification Text. Set to empty string if not available. Refer to {{bibref|3GPP2-C.S0005}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.APIDTEXT";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.OneX.Cell.{i}.ControlChannel.";
+ }
+
+ grouping rem-cdma2000-hrpd-g {
+ description
+ "This object contains parameters relating to radio environment measurement capabilities for the HRPD system.";
+ leaf max-cell-entries {
+ type uint64;
+ description
+ "The maximum number of entries available in the {{object|.REM.CDMA2000.HRPD.Cell.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.MaxCellEntries";
+ }
+ leaf cell-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.CellNumberOfEntries";
+ }
+ leaf max-channel-entries {
+ type uint64;
+ description
+ "The maximum number of entries in {{object|.REM.CDMA2000.HRPD.Channel.{i}.}} table.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.MaxChannelEntries";
+ }
+ leaf channel-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.ChannelNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.";
+ }
+
+ grouping rem-cdma2000-hrpd-channel-g {
+ description
+ "REM specific configuration and reporting.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.Alias";
+ }
+ leaf sniffing-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ description
+ "Config parameter to set band class. Reference - {{bibref|3GPP2-C.S0057}}, Band Class Specification for CDMA2000 Spread Spectrum Systems.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.SniffingBandClass";
+ }
+ leaf sniffing-channel-number {
+ type uint16 {
+ range "0..2016";
+ }
+ description
+ "The Radio Frequency Channel Number (RFCN) in the FL direction.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.SniffingChannelNumber";
+ }
+ leaf-list pn-list {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "{{list}} Each item is a (single value) PN offset in units of 64 PN chips or PNrange expressed in the following format: <Start-value>\"..\"<End-value>:<Increment>. If an empty string, then no specific PNList is provided, meaning that the FAP is required to pick a PN list to scan on its own.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.PNList";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}.";
+ }
+
+ grouping rem-cdma2000-hrpd-cell-g {
+ leaf rem-cdma2000-hrpd-cell-key {
+ type string;
+ description
+ "Key value for this object, which could be an item of a list.";
+ }
+ description
+ "Table indicating the components of the discovered cells.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.";
+ }
+
+ grouping rem-cdma2000-hrpd-cell-rf-g {
+ description
+ "RF REM results for each detected cell.";
+ leaf band {
+ type int64;
+ description
+ "CDMA band for the reported cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.Band";
+ }
+ leaf rfcnfl {
+ type uint16 {
+ range "0..2016";
+ }
+ description
+ "The Radio Frequency Channel Number (RFCN) in the FL direction for the reported cell.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.RFCNFL";
+ }
+ leaf io {
+ type int64;
+ units "dBm";
+ description
+ "The total received power spectral density in {{units}}, including signal and interference.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.Io";
+ }
+ leaf p-ilot-pn {
+ type uint16 {
+ range "0..511";
+ }
+ units "64 PN chips";
+ description
+ "Pilot PN Offset (in units of {{units}}).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.PIlotPN";
+ }
+ leaf p-ilot-pn-phase {
+ type uint64;
+ units "chips";
+ description
+ "Pilot PN phase in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.PIlotPNPhase";
+ }
+ leaf pilot-strength-ecp {
+ type int64;
+ units "dBm";
+ description
+ "The strength estimate of the received pilot energy per chip in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.PilotStrengthEcp";
+ }
+ leaf pilot-strength-ecp-io {
+ type int64;
+ units "dB";
+ description
+ "The strength estimate of the received pilot energy per chip, Ecp, to total received spectral density, Io (signal and noise) in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.PilotStrengthEcpIo";
+ }
+ leaf overheads-available {
+ type boolean;
+ description
+ "If set to {{true}}, the overhead messages for this particular cell is included in {{object|.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.OverheadsAvailable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.RF.";
+ }
+
+ grouping rem-cdma2000-hrpd-cell-control-channel-g {
+ description
+ "Table containing information braodcast on control channel.";
+ leaf color-code {
+ type int64;
+ description
+ "The color code of the measured sector as defined in {{bibref|3GPP2-C.S0024}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.ColorCode";
+ }
+ leaf sector-id {
+ type binary {
+ length "16";
+ }
+ description
+ "The sector ID of the measured sector as defined in {{bibref|3GPP2-C.S0024}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.SectorID";
+ }
+ leaf subnet-mask {
+ type int64;
+ units "bits";
+ description
+ "The length of the subnet mask in {{units}} for the measured sector as defined in {{bibref|3GPP2-C.S0024}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.SubnetMask";
+ }
+ leaf country-code {
+ type int64;
+ description
+ "The country code of the measured sector as defined in {{bibref|3GPP2-C.S0024}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.CountryCode";
+ }
+ leaf latitude {
+ type int64;
+ units "0.25 arc seconds";
+ description
+ "The reported lattitude of the cell in units of {{units}}, expressed as a two's complement signed number with positive numbers signifying North latitudes in the range -1296000 to 1296000 inclusive corresponding to a range of -90 to +90) Refer to {{bibref|3GPP2-C.S0024}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.Latitude";
+ }
+ leaf longitude {
+ type int64;
+ units "0.25 arc seconds";
+ description
+ "The reported longitude of the cell in units of {{units}}, expressed as a two's complement signed number with positive numbers signifying East longitude in the range -2592000 to 2592000 inclusive (corresponding to a range of -180 to +180). Refer to {{bibref|3GPP2-C.S0024}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.Longitude";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.HRPD.Cell.{i}.ControlChannel.";
+ }
+
+ grouping rem-cdma2000-macro-timing-g {
+ description
+ "Parameters for controlling CDMA2000 system timing derived from macro system sniffing.";
+ leaf admin-state {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "This is the Admin State of Macro Timing. Lock means MacroTiming feature is Enabled. Unlock means MacroTiming feature is disabled. 0 - Lock (Enabled), 1 - Unlock (Disabled).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.AdminState";
+ }
+ leaf tracking-channel-number {
+ type uint64;
+ description
+ "Channel number of Macro Base Station currently used for MacroTiming.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.TrackingChannelNumber";
+ }
+ leaf tracking-band-class {
+ type uint8 {
+ range "0..31";
+ }
+ description
+ "BandClass of Macro Base Station currently used for MacroTiming.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.TrackingBandClass";
+ }
+ leaf-list tracking-pn-offset {
+ type string {
+ length "0..256";
+ }
+ description
+ "{{list}} Each item is a (single value) PN offset in units of 64 PN chips of a Macro Base Station currently used for MacroTiming.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.TrackingPNOffset";
+ }
+ leaf timing-source {
+ type uint8 {
+ range "0..1";
+ }
+ description
+ "This parameter indicates the timing source for the FAP: 0 - GPS 1 - Macro Timing The other read-only parameters in this object only have valid values when timingsource is set to 1.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.TimingSource";
+ }
+ leaf channel-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.ChannelNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.";
+ }
+
+ grouping rem-cdma2000-macro-timing-channel-g {
+ description
+ "Object used to configure list of channels to be used for Macto Timing.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the {{object}} entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.Enable";
+ }
+ leaf alias {
+ type string {
+ length "1..64";
+ }
+ description
+ "{{datatype|expand}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.Alias";
+ }
+ leaf air-interface-type {
+ type uint8 {
+ range "0..1";
+ }
+ config false;
+ description
+ "Air interface type of the configured Band class and Channel. 0 - 1x, 1 - HRPD.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.AirInterfaceType";
+ }
+ leaf band-class {
+ type uint8 {
+ range "0..31";
+ }
+ description
+ "Bandclass of the Macro timing channel.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.BandClass";
+ }
+ leaf channel-number {
+ type uint64;
+ description
+ "Macro timing acquisition channel.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.ChannelNumber";
+ }
+ leaf priority {
+ type uint64;
+ config false;
+ description
+ "Priority of the channle to use for acquisition. FAP should prioritize lower values over higher.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.Priority";
+ }
+ leaf-list pn-list {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "{{list}} Each item is a (single value) PN offset in units of 64 PN chips or PNrange expressed in the following format: <Start-value>\"..\"<End-value>:<Increment> If an empty string, then no specific PNList is provided, meaning that the FAP is required to pick a PN list to scan on its own.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.PNList";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}.";
+ }
+
+ grouping transport-g {
+ description
+ "This object contains parameters relating to the transport.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.";
+ }
+
+ grouping transport-sip-g {
+ description
+ "This object contains parameters relating to SIP as a transport protocol. SIP is defined in {{bibref|RFC3261}}.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the whole SIP object and allows the setup or release of SIP associations and their related streams.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.Enable";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.";
+ }
+
+ grouping transport-sip-fcs-g {
+ description
+ "This object models SIP Femtocell Convergence Server (FCS) parameters.";
+ leaf fcsuri {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The request URI for MESSAGE method sent to Femtocell Convergence Server (FCS). The string MUST contain a URI as defined in {{bibref|RFC3986}}. The device MUST support SIP URI and MAY support other URI schemes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.FCSURI";
+ }
+ leaf out-going-proxy-uri {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The request URI for Outgoing Proxy. The string MUST contain a URI as defined in {{bibref|RFC3986}}. The device MUST support SIP URI and MAY support other URI schemes.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.OutGoingProxyURI";
+ }
+ leaf p-access-net-info-header {
+ type string {
+ length "0..256";
+ }
+ description
+ "This string will be populated as the value for P-Access-Network-Info header. This header is generated by the device. See {{bibref|3GPP2-X.S0059}} and {{bibref|RFC3455}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.PAccessNetInfoHeader";
+ }
+ leaf realm {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "The FQDN or IP Address representing the Home Domain of the device. The request URI for REGISTER will be formed by prefixing \"sip:\" to this value.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.Realm";
+ }
+ leaf impu {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The \"IP Multimedia Public User\" (IMPU) Identity.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.IMPU";
+ }
+ leaf impi {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "The \"IP Multimedia Private Identity\" (IMPI). This value is ignored when {{param|SIPAuthMethod}} is set to {{enum|TNA|SIPAuthMethod}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.IMPI";
+ }
+ leaf sip-password {
+ type string {
+ length "0..32";
+ }
+ config false;
+ description
+ "Password to Authenticate the IMS core. This value is ignored when {{param|SIPAuthMethod}} is set to {{enum|TNA|SIPAuthMethod}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPPassword";
+ }
+ leaf-list sip-auth-capability {
+ type enumeration {
+ enum "tna" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPAuthCapability - TNA";
+ }
+ enum "sip-digest" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPAuthCapability - SIPDigest";
+ }
+ }
+ description
+ "Represents the SIP authentication mechanisms supported by this device.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPAuthCapability";
+ }
+ leaf sip-auth-method {
+ type string {
+ length "0..256";
+ }
+ config false;
+ description
+ "Represents the authentication method used by this device for SIP registration. If value is {{enum|SIPDigest}}, the {{param|SIPPassword}} MUST not be {{empty}}. If value is {{enum|TNA}}, {{param|SIPPassword}} and {{param|IMPI}} are ignored.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPAuthMethod";
+ }
+ leaf sip-local-port {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "Local port number for initiating SIP traffic.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPLocalPort";
+ }
+ leaf rtp-port-low-limit {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "The low limit of port number for originating and receiving RTP/RTCP traffic.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.RTPPortLowLimit";
+ }
+ leaf rtp-port-high-limit {
+ type uint16 {
+ range "0..65535";
+ }
+ config false;
+ description
+ "The high limit of port number for originating and receiving RTP/RTCP traffic.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.RTPPortHighLimit";
+ }
+ leaf sip-reg-expiry {
+ type uint64;
+ config false;
+ description
+ "SIP registration expiry value, as defined in {{bibref|RFC3261}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPRegExpiry";
+ }
+ leaf sip-session-expiry {
+ type uint64 {
+ range "90..max";
+ }
+ units "seconds";
+ default "1800";
+ config false;
+ description
+ "SIP session timer expiry value, in {{units}}, as defined in {{bibref|RFC4028}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.SIPSessionExpiry";
+ }
+ leaf-list emergency-numbers-list {
+ type string {
+ length "0..64";
+ }
+ config false;
+ description
+ "Indicates the dialed digit pattern matching strings used to determine if the call is an emergency call that MAY bypass access control and receive priority treatment.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.EmergencyNumbersList";
+ }
+ leaf timer-t1 {
+ type uint64 {
+ range "1..max";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Value of SIP timer T1, in {{units}}, as defined in {{bibref|RFC3261}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.TimerT1";
+ }
+ leaf timer-t2 {
+ type uint64 {
+ range "1..max";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Value of SIP timer T2, in {{units}}, as defined in {{bibref|RFC3261}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.TimerT2";
+ }
+ leaf timer-t4 {
+ type uint64 {
+ range "1..max";
+ }
+ units "milliseconds";
+ config false;
+ description
+ "Value of SIP timer T4, in {{units}}, as defined in {{bibref|RFC3261}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.TimerT4";
+ }
+ leaf t3210 {
+ type uint8 {
+ range "1..20";
+ }
+ units "seconds";
+ config false;
+ description
+ "This value specifies how much time to wait, in {{units}}, before time out on location update accept/reject. See {{bibref|3GPP2-A.S0014}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.T3210";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SIP.FCS.";
+ }
+
+ grouping transport-sctp-g {
+ description
+ "This object contains parameters relating to SCTP as a transport protocol. SCTP is defined in {{bibref|RFC4960}} and {{bibref|RFC3873}}.";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enables or disables the whole SCTP object and allows the setup or release of SCTP associations and their related streams.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Enable";
+ }
+ leaf hb-interval {
+ type uint64 {
+ range "1..max";
+ }
+ units "seconds";
+ default "30";
+ config false;
+ description
+ "Heartbeat interval in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.HBInterval";
+ }
+ leaf max-association-retransmits {
+ type uint64;
+ default "10";
+ config false;
+ description
+ "Maximum number of consecutive retransmissions to a peer before an endpoint considers that the peer is unreachable and closes the association.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.MaxAssociationRetransmits";
+ }
+ leaf max-init-retransmits {
+ type uint64;
+ default "8";
+ config false;
+ description
+ "Number of retransmission per connection-attempt.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.MaxInitRetransmits";
+ }
+ leaf max-path-retransmits {
+ type uint64;
+ default "5";
+ config false;
+ description
+ "Maximum retransmission per destination address.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.MaxPathRetransmits";
+ }
+ leaf rto-initial {
+ type uint64;
+ units "milliseconds";
+ default "3000";
+ config false;
+ description
+ "Initial value for Retransmit timeout in {{units}}. A retransmission time value of zero means immediate retransmission.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.RTOInitial";
+ }
+ leaf rto-max {
+ type uint64;
+ units "milliseconds";
+ default "6000";
+ config false;
+ description
+ "Maximum value for Retransmit timeout in {{units}}. A retransmission time value of zero means immediate retransmission.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.RTOMax";
+ }
+ leaf rto-min {
+ type uint64;
+ units "milliseconds";
+ default "1000";
+ config false;
+ description
+ "Minimum value for Retransmit timeout in {{units}}. A retransmission time value of zero means immediate retransmission. The value of this parameter MUST be lower than or equal to {{param|RTOMax}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.RTOMin";
+ }
+ leaf val-cookie-life {
+ type uint64;
+ units "milliseconds";
+ default "60000";
+ config false;
+ description
+ "Valid cookie life in the 4-way start-up handshake procedure in {{units}}.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.ValCookieLife";
+ }
+ leaf out-of-blues {
+ type uint64;
+ description
+ "The number of correctly formed SCTP packets, including the proper checksum, but for which the receiver was unable to identify an appropriate association.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.OutOfBlues";
+ }
+ leaf checksum-errors {
+ type uint64;
+ description
+ "The number of SCTP packets received with an invalid checksum.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.ChecksumErrors";
+ }
+ leaf out-ctrl-chunks {
+ type uint64;
+ description
+ "The number of SCTP control chunks sent (retransmissions are not included).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.OutCtrlChunks";
+ }
+ leaf out-order-chunks {
+ type uint64;
+ description
+ "The number of SCTP ordered data chunks sent (retransmissions are not included).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.OutOrderChunks";
+ }
+ leaf out-unorder-chunks {
+ type uint64;
+ description
+ "The number of SCTP unordered chunks (data chunks in which the U bit is set to 1) sent (retransmissions are not included).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.OutUnorderChunks";
+ }
+ leaf in-ctrl-chunks {
+ type uint64;
+ description
+ "The number of SCTP control chunks received (no duplicate chunks included).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.InCtrlChunks";
+ }
+ leaf in-order-chunks {
+ type uint64;
+ description
+ "The number of SCTP ordered data chunks received (no duplicate chunks included).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.InOrderChunks";
+ }
+ leaf in-unorder-chunks {
+ type uint64;
+ description
+ "The number of SCTP unordered chunks (data chunks in which the U bit is set to 1) received (no duplicate chunks included).";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.InUnorderChunks";
+ }
+ leaf frag-usr-msgs {
+ type uint64;
+ description
+ "The number of user messages that have been sent fragmented.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.FragUsrMsgs";
+ }
+ leaf reasm-usr-msgs {
+ type uint64;
+ description
+ "The number of user messages that have been received fragmented and submitted to the reassembly process.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.ReasmUsrMsgs";
+ }
+ leaf out-sctp-packs {
+ type uint64;
+ description
+ "The number of SCTP packets sent. Retransmitted DATA chunks are included.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.OutSCTPPacks";
+ }
+ leaf in-sctp-packs {
+ type uint64;
+ description
+ "The number of SCTP packets received. Duplicates are included.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.InSCTPPacks";
+ }
+ leaf discontinuity {
+ type yang:date-and-time;
+ description
+ "The time of the last discontinuity.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Discontinuity";
+ }
+ leaf assoc-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.AssocNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.";
+ }
+
+ grouping transport-sctp-assoc-g {
+ description
+ "SCTP Association Table";
+ leaf status {
+ type enumeration {
+ enum "disabled" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Status - Disabled";
+ }
+ enum "active" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Status - Active";
+ }
+ enum "progressing" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Status - Progressing";
+ }
+ enum "shutting-down" {
+ value 4;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Status - ShuttingDown";
+ }
+ enum "error" {
+ value 5;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Status - Error";
+ }
+ }
+ description
+ "The status of this SCTP association entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Status";
+ }
+ leaf primary-peer-address {
+ type inet:ip-address;
+ description
+ "The primary IP address of the peer SCTP association entity.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.PrimaryPeerAddress";
+ }
+ leaf local-port {
+ type uint16 {
+ range "0..63999";
+ }
+ description
+ "The local SCTP port number used for this SCTP association.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.LocalPort";
+ }
+ leaf in-streams {
+ type uint64;
+ description
+ "The number of Inbound Streams according to the negotiation at association start-up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.InStreams";
+ }
+ leaf out-streams {
+ type uint64;
+ description
+ "The number of Outbound Streams according to the negotiation at association start-up.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.OutStreams";
+ }
+ leaf start-time {
+ type yang:date-and-time;
+ description
+ "The start Time for the present SCTP association.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.StartTime";
+ }
+ leaf discontinuity {
+ type yang:date-and-time;
+ description
+ "The time of the last discontinuity.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.Discontinuity";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.SCTP.Assoc.{i}.";
+ }
+
+ grouping transport-real-time-g {
+ description
+ "This object contains parameters relating to Real Time Transport using RTP.";
+ leaf rtcp-enable {
+ type boolean;
+ config false;
+ description
+ "Enable or disable RTCP.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.RTCPEnable";
+ }
+ leaf sent-packets {
+ type uint64;
+ description
+ "The number of sent RTP packets.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.SentPackets";
+ }
+ leaf rcv-packets {
+ type uint64;
+ description
+ "The number of received RTP packets.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.RcvPackets";
+ }
+ leaf bytes-sent {
+ type uint64;
+ description
+ "Total number of RTP payload bytes sent.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.BytesSent";
+ }
+ leaf bytes-received {
+ type uint64;
+ description
+ "Total number of RTP payload bytes received.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.BytesReceived";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.";
+ }
+
+ grouping transport-real-time-perf-g {
+ description
+ "This object contains performances relating to Real Time Transport using RTP.";
+ leaf lost-rcv-packets {
+ type uint64;
+ description
+ "The number of Lost RTP packets in reception.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.LostRcvPackets";
+ }
+ leaf lost-far-end-packets {
+ type uint64;
+ description
+ "The number of Far End Lost RTP packets.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.LostFarEndPackets";
+ }
+ leaf overruns {
+ type uint64;
+ description
+ "Total number of times the receive jitter buffer has overrun.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.Overruns";
+ }
+ leaf underruns {
+ type uint64;
+ description
+ "Total number of times the receive jitter buffer has underrun for a CS-domain RAB.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.Underruns";
+ }
+ leaf mean-rtt {
+ type uint64;
+ units "microseconds";
+ description
+ "The mean Round Trip Time in {{units}} as computed by the source. {{bibref|RFC3550}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.MeanRTT";
+ }
+ leaf max-rtt {
+ type uint64;
+ units "microseconds";
+ description
+ "The maximum Round Trip Time in {{units}} as computed by the source. {{bibref|RFC3550}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.MaxRTT";
+ }
+ leaf mean-receive-jitter {
+ type uint64;
+ units "microseconds";
+ description
+ "The mean receive jitter in {{units}} as computed by the source. {{bibref|RFC3550}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.MeanReceiveJitter";
+ }
+ leaf max-receive-jitter {
+ type uint64;
+ units "microseconds";
+ description
+ "The maximum receive jitter in {{units}} as computed by the source. {{bibref|RFC3550}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.MaxReceiveJitter";
+ }
+ leaf mean-far-end-jitter {
+ type uint64;
+ units "microseconds";
+ description
+ "The mean far end jitter in {{units}} as computed by the source. {{bibref|RFC3550}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.MeanFarEndJitter";
+ }
+ leaf max-far-end-jitter {
+ type uint64;
+ units "microseconds";
+ description
+ "The maximum far end jitter in {{units}} as computed by the source. {{bibref|RFC3550}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.MaxFarEndJitter";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.RealTime.Perf.";
+ }
+
+ grouping transport-packet-g {
+ description
+ "This object contains parameters relating to Packet Transport using GTP-U.";
+ leaf echo-interval {
+ type uint64;
+ units "seconds";
+ config false;
+ description
+ "Echo interval in {{units}}. An Echo interval value of zero means echo is disabled.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Packet.EchoInterval";
+ }
+ leaf sent-packets {
+ type uint64;
+ description
+ "The number of sent GTP-U packets.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Packet.SentPackets";
+ }
+ leaf rcv-packets {
+ type uint64;
+ description
+ "The number of received GTP-U packets.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Packet.RcvPackets";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Packet.";
+ }
+
+ grouping transport-security-g {
+ description
+ "This object contains parameters relating to Security.";
+ leaf secret-number-of-entries {
+ type uint64;
+ description
+ "{{numentries}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.SecretNumberOfEntries";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.";
+ }
+
+ grouping transport-security-secret-g {
+ description
+ "Shared Secret Table. This table gathers information about all types of shared secret-based credentials (UICC).";
+ leaf enable {
+ type boolean;
+ config false;
+ description
+ "Enable or disable this Shared Secret entry";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Enable";
+ }
+ leaf type {
+ type enumeration {
+ enum "sim" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Type - SIM";
+ }
+ enum "usim" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Type - USIM";
+ }
+ }
+ description
+ "The type of this Shared Secret entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Type";
+ }
+ leaf status {
+ type enumeration {
+ enum "present" {
+ value 1;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Status - Present";
+ }
+ enum "not-present" {
+ value 2;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Status - Not_present";
+ }
+ enum "error" {
+ value 3;
+ description
+ "none";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Status - Error";
+ }
+ }
+ description
+ "The status of this Shared Secret entry.";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.Status";
+ }
+ leaf uicc-card-id {
+ type string {
+ length "0..19";
+ }
+ description
+ "The UICC Card Identifier (UICCID), only numeric values are allowed. {{bibref|ITU-E.118}}";
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.UICCCardID";
+ }
+ reference "BBF TR-196 2.0.3 full - FAPService.{i}.Transport.Security.Secret.{i}.";
+ }
+}
Code Review / ccsdk / apps.git / commitdiff