# limitations under the License.
#
#############################################################################
-# v20181226
+# v20100109
# https://wiki.onap.org/display/DW/ONAP+on+Kubernetes
-# source from https://jira.onap.org/browse/OOM-320, 326, 321
+# source from https://jira.onap.org/browse/OOM-320, 326, 321, 898
# Michael O'Brien
#
example
./cd.sh -b amsterdam -e onap (will rerun onap in the onap namespace, no new repo, no deletion of existing repo, no sdnc workaround, no onap removal at the end
./cd.sh -b master -e onap -s 500 -c true -d true -w true -r true (run as cd server, new oom, delete prev oom, run workarounds, clean onap at the end of the script
-./cd.sh -b master -e onap -s 600 -c true -d false -w true -r false (standard new server/dev environment - use this as the default)
+./cd.sh -b 3.0.0-ONAP -e onap -p true -n nexus3.onap.org:10001 -f true -s 600 -c true -d false -w true -r false (standard new server/dev environment - use this as the default)
provide a dev0.yaml/dev1.yaml override set (0=platform, 1=rest of pods) - copy from https://git.onap.org/oom/tree/kubernetes/onap/resources/environments/dev.yaml
-
+ note: the managed deploy where -f is true - deploys all of ONAP - for a subset driven by the enabled flags in the dev yaml - use -f false - as the --set enabled flags override in the prior case
-u : Display usage
-b [branch] : branch = master/beijing or amsterdam (required)
-e [environment] : use the default (onap)
+-p [true|false] : docker prepull (default false)
+-n [nexus3 url:port]: nexus3.onap.org:10001 or proxy - used in prepull
+-f [true|false] : managed deploy - time sequenced - defaults to a full deploy
-s [seconds] : delay between base and rest of onap dual-deployments based on dev0 and dev1.yaml
-c [true|false] : FLAG clone new oom repo (default: true)
-d [true|false] : FLAG delete prev oom - (cd build) (default: false)
EOF
}
+wait_for_pod() {
+ local RUNNING_PODS_LIMIT=$2
+ local MAX_WAIT_PERIODS=140 # 35 MIN
+ local COUNTER=1
+ local PENDING_PODS=0
+ local TARGET_POD_PREFIX=$1
+ local PENDING=0
+ while [ $PENDING -lt $RUNNING_PODS_LIMIT ]; do
+ PENDING=$(kubectl get pods --all-namespaces | grep $TARGET_POD_PREFIX | grep -E '1/1|2/2|1/3|2/3' | wc -l)
+ PENDING_PODS=$PENDING
+ sleep 15
+ LIST_PENDING=$(kubectl get pods --all-namespaces -o wide | grep $TARGET_POD_PREFIX | grep -E '1/1|2/2|1/3|2/3' )
+ echo "${PENDING} running < ${RUNNING_PODS_LIMIT} at the ${COUNTER}th 15 sec interval for $TARGET_POD_PREFIX"
+ COUNTER=$((COUNTER + 1 ))
+ MAX_WAIT_PERIODS=$((MAX_WAIT_PERIODS - 1))
+ if [ "$MAX_WAIT_PERIODS" -eq 0 ]; then
+ PENDING=800
+ fi
+ done
+ dt="$(date +"%T")"
+ echo "$dt: ${PENDING} pods are up (1/1|2/2|3/3) for $TARGET_POD_PREFIX at the ${COUNTER}th 15 sec interval"
+ echo "deployments: note order: helm list"
+ sudo helm list
+ kubectl get pods --all-namespaces -o wide
+}
+
deploy_onap() {
-
echo "$(date)"
- echo "running with: -b $BRANCH -e $ENVIRON -s $SPLIT_DEPLOY_DELAY -c $CLONE_NEW_OOM -d $DELETE_PREV_OOM -w $APPLY_WORKAROUNDS -r $REMOVE_OOM_AT_END"
+ echo "running with: -b $BRANCH -e $ENVIRON -p $DOCKER_PREPULL -n $NEXUS3_AND_PORT -f $FULL_MANAGED_DEPLOY -s $SPLIT_DEPLOY_DELAY -c $CLONE_NEW_OOM -d $DELETE_PREV_OOM -w $APPLY_WORKAROUNDS -r $REMOVE_OOM_AT_END"
echo "provide onap-parameters.yaml(amsterdam) or dev0.yaml+dev1.yaml (master) and aai-cloud-region-put.json"
echo "provide a dev0.yaml and dev1.yaml override (0=platform, 1=rest of pods) - copy from https://git.onap.org/oom/tree/kubernetes/onap/resources/environments/dev.yaml"
+
+ if [[ "$BRANCH" == "beijing" ]]; then
+ echo "beijing install deployment no longer supported for a full install because of the configmap 1g limit - use casablanca+ for helm deploy"
+ exit 1
+ fi
+
# fix virtual memory for onap-log:elasticsearch under Rancher 1.6.11 - OOM-431
sudo sysctl -w vm.max_map_count=262144
if [[ "$DELETE_PREV_OOM" != false ]]; then
- echo "remove existing oom"
+ echo "remove currently deployed pods"
+ sudo helm list
# master/beijing only - not amsterdam
if [ "$BRANCH" == "amsterdam" ]; then
oom/kubernetes/oneclick/deleteAll.bash -n $ENVIRON
fi
# verify
- DELETED=$(kubectl get pods --all-namespaces -a | grep -E '0/|1/2' | wc -l)
- echo "showing {$DELETED} undeleted pods"
+ DELETED=$(kubectl get pods --all-namespaces | grep -E '0/|1/2|1/3|2/3' | wc -l)
+ echo "showing $DELETED undeleted pods"
echo "verify deletion is finished."
- while [ $(kubectl get pods --all-namespaces | grep -E '0/|1/2' | wc -l) -gt 0 ]; do
+ # max number of cycles exits to --force block next
+ local MAX_DELETION_WAIT_PERIODS_BEFORE_RUNNING_FORCE=120 # 30 min
+ local DELETE_COUNTER=0
+ while [ $(kubectl get pods --all-namespaces | grep -E '0/|1/2|1/3|2/3' | wc -l) -gt 0 ]; do
sleep 15
- echo "waiting for deletions to complete"
+ echo "waiting for deletions to complete, iteration $DELETE_COUNTER of $MAX_DELETION_WAIT_PERIODS_BEFORE_RUNNING_FORCE"
+ # addressing rare occurrence on Terminating instances requiring scripted --force in next merge for LOG-914
+ COUNTER=$((COUNTER + 1 ))
+ MAX_DELETION_WAIT_PERIODS_BEFORE_RUNNING_FORCE=$((MAX_DELETION_WAIT_PERIODS_BEFORE_RUNNING_FORCE - 1))
+ if [ "$MAX_DELETION_WAIT_PERIODS_BEFORE_RUNNING_FORCE" -eq 0 ]; then
+ #https://wiki.onap.org/display/DW/ONAP+Development#ONAPDevelopment-WorkingwithJSONPath
+ export POD_NAMES=$(kubectl get pods --field-selector=status.phase!=Running --all-namespaces -o jsonpath="{.items[*].metadata.name}")
+ echo "--force delete on pods: $POD_NAMES"
+ for pod in $POD_NAMES; do
+ echo "running: kubectl delete pods $pod --grace-period=0 --force -n $ENVIRON"
+ kubectl delete pods $pod --grace-period=0 --force -n $ENVIRON
+ done
+ fi
done
- # wait for 0/1 before deleting
- echo "sleeping 30 sec"
- # delete potential hanging clustered pods
- #kubectl delete pod $ENVIRON-aaf-sms-vault-0 -n $ENVIRON --grace-period=0 --force
+ echo "Pod deletions completed"
+
# specific to when there is no helm release
kubectl delete pv --all
kubectl delete pvc --all
kubectl delete secrets --all
kubectl delete clusterrolebinding --all
- # replace with watch
# keep jenkins 120 sec timeout happy with echos
sleep 30
- echo "List of ONAP Modules - look for terminating pods"
- LIST_ALL=$(kubectl get pods --all-namespaces --show-all -o wide )
+ echo "List of ONAP Modules - look for terminating pods - should be none - only the kubernetes system"
+ LIST_ALL=$(kubectl get pods --all-namespaces -o wide )
echo "${LIST_ALL}"
# for use by continuous deployment only
- echo " deleting /dockerdata-nfs/ all onap-* deployments"
+ echo " deleting /dockerdata-nfs/ all onap-* deployment directories - why: some pod config jobs will not run on a non-empty nfs subdir"
sudo chmod -R 777 /dockerdata-nfs/*
rm -rf /dockerdata-nfs/*
fi
+
# for use by continuous deployment only
if [[ "$CLONE_NEW_OOM" != false ]]; then
rm -rf oom
echo "pull new oom"
git clone -b $BRANCH http://gerrit.onap.org/r/oom
- # https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins
- sudo cp -R ~/oom/kubernetes/helm/plugins/ ~/.helm
fi
+ # https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins
+ sudo cp -R ~/oom/kubernetes/helm/plugins/ ~/.helm
+
if [ "$BRANCH" == "amsterdam" ]; then
echo "start config pod"
# still need to source docker variables
echo "waiting for config pod to complete"
done
else
- echo "moving values.yaml to oom/kubernetes/"
- #sudo cp values.yaml oom/kubernetes/onap
+ echo "using dev0|1.yaml in working dir"
fi
# usually the prepull takes up to 25-300 min - however hourly builds will finish the docker pulls before the config pod is finished
- #echo "pre pull docker images - 35+ min"
- #wget https://jira.onap.org/secure/attachment/11261/prepull_docker.sh
- #chmod 777 prepull_docker.sh
- #./prepull_docker.sh
+ if [[ "$DOCKER_PREPULL" != false ]]; then
+ echo "pre pull docker images - 40+ min for 75G - use a proxy"
+ sudo wget https://git.onap.org/logging-analytics/plain/deploy/docker_prepull.sh
+ sudo chmod 777 docker_prepull.sh
+ # run only on slave nodes vis cloudformation or heat template
+ sudo ./docker_prepull.sh -b $BRANCH -s $NEXUS3_AND_PORT -v true
+ fi
+
echo "start onap pods"
if [ "$BRANCH" == "amsterdam" ]; then
cd oom/kubernetes/oneclick
sudo make clean
sudo make all
sudo make $ENVIRON
+
+ local DISABLE_CHARTS_YAML=onap/resources/environments/disable-allcharts.yaml
+ local DEV0_YAML=~/dev0.yaml
+ local DEV1_YAML=~/dev1.yaml
#sudo helm install local/onap -n onap --namespace $ENVIRON
+ dt="$(date +"%T")"
+ echo "$dt: starting ONAP install"
# run an empty deploy first to get a round a random helm deploy failure on a release upgrade failure (deploy plugin runs as upgrade instead of install)
echo "deploying empty onap deployment as base 1 of 3"
- sudo helm deploy onap local/onap --namespace $ENVIRON -f onap/resources/environments/disable-allcharts.yaml --verbose
+ sudo helm deploy onap local/onap --namespace $ENVIRON -f $DISABLE_CHARTS_YAML --verbose
# deploy platform pods first - dev0 and dev1 can be the same is required
- echo "deploying base onap pods as base 2 of 3"
- sudo helm deploy onap local/onap --namespace $ENVIRON -f onap/resources/environments/disable-allcharts.yaml -f ~/dev0.yaml --verbose
- echo "sleep ${SPLIT_DEPLOY_DELAY} sec to allow base platform pods to complete - without a grep on 0/1|0/2| non-Complete jobs"
- sleep $SPLIT_DEPLOY_DELAY
- echo "deploying rest of onap pods as base 3 of 3"
- sudo helm deploy onap local/onap --namespace $ENVIRON -f onap/resources/environments/disable-allcharts.yaml -f ~/dev1.yaml --verbose
- cd ../../
+ echo "deploying base onap pods as base 2 of 3 - sleep 30 between"
+ sleep 30
+
+ if [[ "$FULL_MANAGED_DEPLOY" != true ]]; then
+ echo "deploying onap subset based on dev0.yaml - use -f true option to bring up all of onap in sequence"
+ sudo helm deploy onap local/onap --namespace $ENVIRON -f $DISABLE_CHARTS_YAML -f $DEV0_YAML --verbose
+ echo "sleep ${SPLIT_DEPLOY_DELAY} sec to allow base platform pods to complete - without a grep on 0/1|0/2|0/3 non-Complete jobs"
+ sleep $SPLIT_DEPLOY_DELAY
+ echo "deploying rest of onap pods as base 3 of 3"
+ sudo helm deploy onap local/onap --namespace $ENVIRON -f $DISABLE_CHARTS_YAML -f $DEV1_YAML --verbose
+ else
+ # for now master and casablanca have the same pod structure
+ if [[ "$BRANCH" == "casablanca" ]] || [[ "$BRANCH" == "3.0.0-ONAP" ]] || [[ "$BRANCH" == "3.0.1-ONAP" ]] || [[ "$BRANCH" == "master" ]]; then
+ if [[ "$BRANCH" == "master" ]]; then
+ DEPLOY_ORDER_POD_NAME_ARRAY=('robot consul aaf dmaap dcaegen2 msb aai esr multicloud oof so sdc sdnc vid policy portal log vfc uui vnfsdk appc clamp cli pomba vvp contrib sniro-emulator')
+ # don't count completed pods
+ DEPLOY_NUMBER_PODS_DESIRED_ARRAY=(1 4 13 11 13 5 15 2 6 17 10 12 11 2 8 6 3 18 2 5 5 5 1 11 11 3 1)
+ # account for podd that have varying deploy times or replicaset sizes
+ # don't count the 0/1 completed pods - and skip most of the ResultSet instances except 1
+ # dcae boostrap is problematic
+ DEPLOY_NUMBER_PODS_PARTIAL_ARRAY=(1 2 11 9 13 5 11 2 6 16 10 12 11 2 8 6 3 18 2 5 5 5 1 9 11 3 1)
+ else
+ # casablanca branches
+ DEPLOY_ORDER_POD_NAME_ARRAY=('robot consul aaf dmaap dcaegen2 msb aai esr multicloud oof so sdc sdnc vid policy portal log vfc uui vnfsdk appc clamp cli pomba vvp contrib sniro-emulator')
+ # don't count completed pods
+ DEPLOY_NUMBER_PODS_DESIRED_ARRAY=(1 4 13 11 13 5 15 2 6 17 10 12 11 2 8 6 3 18 2 5 5 5 1 11 11 3 1)
+ # account for podd that have varying deploy times or replicaset sizes
+ # don't count the 0/1 completed pods - and skip most of the ResultSet instances except 1
+ # dcae boostrap is problematic
+ DEPLOY_NUMBER_PODS_PARTIAL_ARRAY=(1 2 11 9 13 5 11 2 6 16 10 12 11 2 8 6 3 18 2 5 5 5 1 9 11 3 1)
+ fi
+ echo "deploying for $BRANCH using profile $DEPLOY_ORDER_POD_NAME_ARRAY"
+ else
+ echo "branch $BRANCH not supported or unknown - check with LOG-326 or LOG-898"
+ exit 1
+ fi
+
+ echo "deploying full onap system in dependency order - in sequence for staged use of hd/ram/network resources"
+ # http://tldp.org/HOWTO/Bash-Prog-Intro-HOWTO-7.html
+ # iterate over the multidimensional array and build up a deploy list as we deploy each pod
+ local DEPLOY_INDEX=0
+ local PODS_PARTIAL=0
+ local APPENDABLE_ENABLED_FLAGS=
+ for POD_NAME in $DEPLOY_ORDER_POD_NAME_ARRAY; do
+ PODS_PARTIAL=${DEPLOY_NUMBER_PODS_PARTIAL_ARRAY[$DEPLOY_INDEX]}
+ PODS_DESIRED=${DEPLOY_NUMBER_PODS_DESIRED_ARRAY[$DEPLOY_INDEX]}
+ echo "deploying $DEPLOY_INDEX for $POD_NAME - expecting $PODS_PARTIAL of a possible $PODS_DESIRED"
+ DEPLOY_INDEX=$((DEPLOY_INDEX + 1 ))
+ # append --set pod.enabled=true
+ APPENDABLE_ENABLED_FLAGS+=" --set "
+ APPENDABLE_ENABLED_FLAGS+=$POD_NAME
+ APPENDABLE_ENABLED_FLAGS+=".enabled=true"
+ echo $APPENDABLE_ENABLED_FLAGS
+ sudo helm deploy onap local/onap --namespace $ENVIRON -f $DISABLE_CHARTS_YAML -f $DEV0_YAML $APPENDABLE_ENABLED_FLAGS --verbose
+ #sleep $SPLIT_DEPLOY_DELAY
+ # using name- as a match will bring in some extra pods like so-so-vfc and sdnc-sdnc-portal
+ # however using name-name will not work as some pods are named msb-kube2msb or oof-cmso not oof-oof
+ # using thenamespace-pod will work like onap-oof - keyed on passed in namespace
+ wait_for_pod $ENVIRON-$POD_NAME $PODS_PARTIAL
+ done
+ fi
+ cd ../../
fi
- echo "wait for all pods up for 15-80 min"
+ dt="$(date +"%T")"
+ echo "$dt: wait for all pods up for 15-80 min"
FAILED_PODS_LIMIT=0
MAX_WAIT_PERIODS=480 # 120 MIN
COUNTER=0
PENDING_PODS=0
- while [ $(kubectl get pods --all-namespaces | grep -E '0/|1/2' | wc -l) -gt $FAILED_PODS_LIMIT ]; do
- PENDING=$(kubectl get pods --all-namespaces | grep -E '0/|1/2' | wc -l)
+ while [ $(kubectl get pods --all-namespaces | grep -E '0/|1/2|1/3|2/3' | wc -l) -gt $FAILED_PODS_LIMIT ]; do
+ PENDING=$(kubectl get pods --all-namespaces | grep -E '0/|1/2|1/3|2/3' | wc -l)
PENDING_PODS=$PENDING
sleep 15
- LIST_PENDING=$(kubectl get pods --all-namespaces -o wide | grep -E '0/|1/2' )
+ LIST_PENDING=$(kubectl get pods --all-namespaces -o wide | grep -E '0/|1/2|1/2|2/3' )
echo "${LIST_PENDING}"
echo "${PENDING} pending > ${FAILED_PODS_LIMIT} at the ${COUNTER}th 15 sec interval"
echo ""
done
echo "report on non-running containers"
- PENDING=$(kubectl get pods --all-namespaces | grep -E '0/|1/2')
- PENDING_COUNT=$(kubectl get pods --all-namespaces | grep -E '0/|1/2' | wc -l)
- PENDING_COUNT_AAI=$(kubectl get pods -n $ENVIRON | grep aai- | grep -E '0/|1/2' | wc -l)
+ PENDING=$(kubectl get pods --all-namespaces | grep -E '0/|1/2|1/3|2/3')
+ PENDING_COUNT=$(kubectl get pods --all-namespaces | grep -E '0/|1/2|1/3|2/3' | wc -l)
+ PENDING_COUNT_AAI=$(kubectl get pods -n $ENVIRON | grep aai- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_AAI" -gt 0 ]; then
echo "down-aai=${PENDING_COUNT_AAI}"
fi
# todo don't stop if aai is down
- PENDING_COUNT_APPC=$(kubectl get pods -n $ENVIRON | grep appc- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_APPC=$(kubectl get pods -n $ENVIRON | grep appc- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_APPC" -gt 0 ]; then
echo "down-appc=${PENDING_COUNT_APPC}"
fi
- PENDING_COUNT_MR=$(kubectl get pods -n $ENVIRON | grep message-router- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_MR=$(kubectl get pods -n $ENVIRON | grep message-router- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_MR" -gt 0 ]; then
echo "down-mr=${PENDING_COUNT_MR}"
fi
- PENDING_COUNT_SO=$(kubectl get pods -n $ENVIRON | grep so- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_SO=$(kubectl get pods -n $ENVIRON | grep so- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_SO" -gt 0 ]; then
echo "down-so=${PENDING_COUNT_SO}"
fi
- PENDING_COUNT_POLICY=$(kubectl get pods -n $ENVIRON | grep policy- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_POLICY=$(kubectl get pods -n $ENVIRON | grep policy- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_POLICY" -gt 0 ]; then
echo "down-policy=${PENDING_COUNT_POLICY}"
fi
- PENDING_COUNT_PORTAL=$(kubectl get pods -n $ENVIRON | grep portal- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_PORTAL=$(kubectl get pods -n $ENVIRON | grep portal- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_PORTAL" -gt 0 ]; then
echo "down-portal=${PENDING_COUNT_PORTAL}"
fi
- PENDING_COUNT_LOG=$(kubectl get pods -n $ENVIRON | grep log- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_LOG=$(kubectl get pods -n $ENVIRON | grep log- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_LOG" -gt 0 ]; then
echo "down-log=${PENDING_COUNT_LOG}"
fi
- PENDING_COUNT_ROBOT=$(kubectl get pods -n $ENVIRON | grep robot- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_ROBOT=$(kubectl get pods -n $ENVIRON | grep robot- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_ROBOT" -gt 0 ]; then
echo "down-robot=${PENDING_COUNT_ROBOT}"
fi
- PENDING_COUNT_SDC=$(kubectl get pods -n $ENVIRON | grep sdc- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_SDC=$(kubectl get pods -n $ENVIRON | grep sdc- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_SDC" -gt 0 ]; then
echo "down-sdc=${PENDING_COUNT_SDC}"
fi
- PENDING_COUNT_SDNC=$(kubectl get pods -n $ENVIRON | grep sdnc- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_SDNC=$(kubectl get pods -n $ENVIRON | grep sdnc- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_SDNC" -gt 0 ]; then
echo "down-sdnc=${PENDING_COUNT_SDNC}"
fi
- PENDING_COUNT_VID=$(kubectl get pods -n $ENVIRON | grep vid- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_VID=$(kubectl get pods -n $ENVIRON | grep vid- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_VID" -gt 0 ]; then
echo "down-vid=${PENDING_COUNT_VID}"
fi
- PENDING_COUNT_AAF=$(kubectl get pods -n $ENVIRON | grep aaf- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_AAF=$(kubectl get pods -n $ENVIRON | grep aaf- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_AAF" -gt 0 ]; then
echo "down-aaf=${PENDING_COUNT_AAF}"
fi
- PENDING_COUNT_CONSUL=$(kubectl get pods -n $ENVIRON | grep consul- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_CONSUL=$(kubectl get pods -n $ENVIRON | grep consul- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_CONSUL" -gt 0 ]; then
echo "down-consul=${PENDING_COUNT_CONSUL}"
fi
- PENDING_COUNT_MSB=$(kubectl get pods -n $ENVIRON | grep msb- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_MSB=$(kubectl get pods -n $ENVIRON | grep msb- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_MSB" -gt 0 ]; then
echo "down-msb=${PENDING_COUNT_MSB}"
fi
- PENDING_COUNT_DCAE=$(kubectl get pods -n $ENVIRON | grep dcaegen2- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_DCAE=$(kubectl get pods -n $ENVIRON | grep dcaegen2- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_DCAE" -gt 0 ]; then
echo "down-dcae=${PENDING_COUNT_DCAE}"
fi
- PENDING_COUNT_CLI=$(kubectl get pods -n $ENVIRON | grep cli- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_CLI=$(kubectl get pods -n $ENVIRON | grep cli- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_CLI" -gt 0 ]; then
echo "down-cli=${PENDING_COUNT_CLI}"
fi
- PENDING_COUNT_MULTICLOUD=$(kubectl get pods -n $ENVIRON | grep multicloud- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_MULTICLOUD=$(kubectl get pods -n $ENVIRON | grep multicloud- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_MULTICLOUD" -gt 0 ]; then
echo "down-multicloud=${PENDING_COUNT_MULTICLOUD}"
fi
- PENDING_COUNT_CLAMP=$(kubectl get pods -n $ENVIRON | grep clamp- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_CLAMP=$(kubectl get pods -n $ENVIRON | grep clamp- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_CLAMP" -gt 0 ]; then
echo "down-clamp=${PENDING_COUNT_CLAMP}"
fi
- PENDING_COUNT_VNFSDK=$(kubectl get pods -n $ENVIRON | grep vnfsdk- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_VNFSDK=$(kubectl get pods -n $ENVIRON | grep vnfsdk- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_VNFSDK" -gt 0 ]; then
echo "down-vnfsdk=${PENDING_COUNT_VNFSDK}"
fi
- PENDING_COUNT_UUI=$(kubectl get pods -n $ENVIRON | grep uui- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_UUI=$(kubectl get pods -n $ENVIRON | grep uui- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_UUI" -gt 0 ]; then
echo "down-uui=${PENDING_COUNT_UUI}"
fi
- PENDING_COUNT_VFC=$(kubectl get pods -n $ENVIRON | grep vfc- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_VFC=$(kubectl get pods -n $ENVIRON | grep vfc- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_VFC" -gt 0 ]; then
echo "down-vfc=${PENDING_COUNT_VFC}"
fi
- PENDING_COUNT_KUBE2MSB=$(kubectl get pods -n $ENVIRON | grep kube2msb- | grep -E '0/|1/2' | wc -l)
+ PENDING_COUNT_KUBE2MSB=$(kubectl get pods -n $ENVIRON | grep kube2msb- | grep -E '0/|1/2|1/3|2/3' | wc -l)
if [ "$PENDING_COUNT_KUBE2MSB" -gt 0 ]; then
echo "down-kube2msb=${PENDING_COUNT_KUBE2MSB}"
fi
echo "pending containers=${PENDING_COUNT}"
echo "${PENDING}"
- echo "check filebeat 2/2 count for ELK stack logging consumption"
- FILEBEAT=$(kubectl get pods --all-namespaces -a | grep 2/)
+ echo "check filebeat 2/2|3/3 count for ELK stack logging consumption"
+ FILEBEAT=$(kubectl get pods --all-namespaces -a | grep -E '2/|3/')
echo "${FILEBEAT}"
echo "sleep 5 min - to allow rest frameworks to finish"
sleep 300
echo "List of ONAP Modules"
- LIST_ALL=$(kubectl get pods --all-namespaces -a --show-all )
+ LIST_ALL=$(kubectl get pods --all-namespaces -a -o wide )
echo "${LIST_ALL}"
echo "run healthcheck 2 times to warm caches and frameworks so rest endpoints report properly - see OOM-447"
./ete-k8s.sh $ENVIRON health
fi
echo "run partial vFW"
-# sudo chmod 777 /dockerdata-nfs/onap
-# if [ "$BRANCH" == "amsterdam" ]; then
-# ./demo-k8s.sh init_robot
-# else
-# ./demo-k8s.sh $ENVIRON init
-# fi
-# if [ "$BRANCH" == "amsterdam" ]; then
-# ./demo-k8s.sh init
-# else
-# ./demo-k8s.sh $ENVIRON init
-# fi
echo "report results"
cd ../../../
BRANCH=
ENVIRON=onap
+FULL_MANAGED_DEPLOY=true
APPLY_WORKAROUNDS=true
DELETE_PREV_OOM=false
REMOVE_OOM_AT_END=false
CLONE_NEW_OOM=true
SPLIT_DEPLOY_DELAY=600
+DOCKER_PREPULL=false
+NEXUS3_AND_PORT=nexus3.onap.org:10001
-while getopts ":u:b:e:s:c:d:w:r" PARAM; do
+while getopts ":u:b:e:p:n:s:f:c:d:w:r" PARAM; do
case $PARAM in
u)
usage
e)
ENVIRON=${OPTARG}
;;
+ p)
+ DOCKER_PREPULL=${OPTARG}
+ ;;
+ n)
+ NEXUS3_AND_PORT=${OPTARG}
+ ;;
s)
SPLIT_DEPLOY_DELAY=${OPTARG}
;;
+ f)
+ FULL_MANAGED_DEPLOY=${OPTARG}
+ ;;
c)
CLONE_NEW_OOM=${OPTARG}
;;
exit 1
fi
-deploy_onap $BRANCH $ENVIRON $SPLIT_DEPLOY_DELAY $CLONE_NEW_OOM $DELETE_PREV_OOM $APPLY_WORKAROUNDS $REMOVE_OOM_AT_END
+deploy_onap $BRANCH $ENVIRON $DOCKER_PREPULL $NEXUS3_AND_PORT $SPLIT_DEPLOY_DELAY $FULL_MANAGED_DEPLOY $CLONE_NEW_OOM $DELETE_PREV_OOM $APPLY_WORKAROUNDS $REMOVE_OOM_AT_END
printf "**** Done ****\n"
Code Review / logging-analytics.git / commitdiff