helm_version:
description: helm version to be installed
- default: v2.8.2
+ default: v2.9.1
dsl_definitions:
.. table:: OOM Software Requirements
- ============== ========== ===== ======= ========
- Release Kubernetes Helm kubectl Docker
- ============== ========== ===== ======= ========
- amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
- beijing/master 1.8.10 2.8.2 1.8.10 17.03.x
- ============== ========== ===== ======= ========
+ ============== ========== ===== ======= ========
+ Release Kubernetes Helm kubectl Docker
+ ============== ========== ===== ======= ========
+ amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
+ beijing 1.8.10 2.8.2 1.8.10 17.03.x
+ casablanca/master 1.8.10 2.9.1 1.8.10 17.03.x
+ ============== ========== ===== ======= ========
Minimum Hardware Configuration
==============================
will be displayed::
ubuntu@sb4-k8s-1:~$ helm list
- Error: incompatible versions c1ient[v2.8.2] server[v2.6.1]
+ Error: incompatible versions c1ient[v2.9.1] server[v2.6.1]
ubuntu@sb4-k8s-1:~$
7. Upgrade the server-side component of helm (tiller) via `helm init --upgrade`::
~~~~~~~~~~~~
Helm is used by OOM for package and configuration management. To install Helm, enter the following::
- > wget http://storage.googleapis.com/kubernetes-helm/helm-v2.8.2-linux-amd64.tar.gz
- > tar -zxvf helm-v2.8.2-linux-amd64.tar.gz
+ > wget http://storage.googleapis.com/kubernetes-helm/helm-v2.9.1-linux-amd64.tar.gz
+ > tar -zxvf helm-v2.9.1-linux-amd64.tar.gz
> sudo mv linux-amd64/helm /usr/local/bin/helm
Verify the Helm version with::
DOCKER_VERSION=17.03
KUBECTL_VERSION=1.8.10
-HELM_VERSION=2.8.2
+HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
#!/bin/bash
DOCKER_VERSION=17.03
-RANCHER_VERSION=1.6.14
+RANCHER_VERSION=1.6.18
KUBECTL_VERSION=1.8.10
-HELM_VERSION=2.8.2
+HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
description: ONAP AAF cassandra
name: aaf-cs
+/* # Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License. */
// Table Initialization
// First make sure the keyspace exists.
+/* # Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License. */
+
// For Developer Machine single instance
// CREATE KEYSPACE authz
// WITH REPLICATION = {'class' : 'SimpleStrategy','replication_factor':1};
+/* # Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License. */
+
USE authz;
// Create 'org' root NS
+/* # Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License. */
+
USE authz;
INSERT INTO user_role(user,role,expires,ns,rname)
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:2.0.0
+image: onap/aaf/smsquorumclient:latest
pullPolicy: Always
# flag to enable debugging - application support required
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
+ initContainers:
+ - image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "aaf-sms-vault"
+ - --container-name
+ - "aaf-sms-vault-backend"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
containers:
- image: "{{ include "common.repository" . }}/{{ .Values.image }}"
- name: {{ include "common.name" . }}
imagePullPolicy: {{ .Values.pullPolicy }}
+ name: {{ include "common.name" . }}
command: ["/sms/bin/sms"]
workingDir: /sms/
ports:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms:2.0.0
+image: onap/aaf/sms:latest
pullPolicy: Always
# flag to enable debugging - application support required
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
# BEGIN Store prev
BD=/opt/app/osaaf/backup
if [ -e "$BD/6day" ]; then
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
cd /opt/app/cass_backup
DATA="ns role perm ns_attrib user_role cred cert x509 delegate approval approved future notify artifact health history"
PWD=cassandra
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
#
# Sample Identities.dat
# This file is for use with the "Default Organization". It is a simple mechanism to have a basic ILM structure to use with
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
#
# Sample Identities.dat
# This file is for use with the "Default Organization". It is a simple mechanism to have a basic ILM structure to use with
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
##
## org.osaaf.cm.props
## AAF Certificate Manager properties
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
############################################################
# Common properties for all AAF Components
# on 2018-03-02 06:59.628-0500
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
##
## org.osaaf.locator
## AAF Locator Properties
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
##
## org.osaaf.locator
## AAF Locator Properties
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
##
## org.osaaf.locator
## AAF Locator Properties
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
##
## org.osaaf.locator
## AAF Locator Properties
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
##
## org.osaaf.locator
## AAF Locator Properties
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
#
# Define Organizations for use in some of the components. Not all use them
#
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
##
## org.osaaf.service
## AAF Service Properties
-############################################################
-# Properties Generated by AT&T Certificate Manager
-# by jg1555
-# on 2018-02-21T10:28:08.909-0600
-# @copyright 2016, AT&T
-############################################################
+# Copyright © 2018 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
cm_url=https://{{.Values.config.cmServiceName}}:8150
#hostname=aaf.osaaf.org
aaf_env=DEV
+++ /dev/null
-apiVersion: v1
-description: ONAP AAI hbase
-name: aai-hbase
-version: 2.0.0
+++ /dev/null
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ .Release.Name }}
- heritage: {{ .Release.Service }}
-spec:
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
- name: {{ include "common.name" . }}
- spec:
- hostname: aai-hbase
- containers:
- - name: {{ include "common.name" . }}
- image: {{ .Values.global.dockerhubRepository | default .Values.dockerhubRepository }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- - containerPort: {{ .Values.service.internalPort2 }}
- - containerPort: {{ .Values.service.internalPort3 }}
- - containerPort: {{ .Values.service.internalPort4 }}
- - containerPort: {{ .Values.service.internalPort5 }}
- - containerPort: {{ .Values.service.internalPort6 }}
- - containerPort: {{ .Values.service.internalPort7 }}
- # disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- volumeMounts:
- - name: hbase-data
- mountPath: /tmp
- - name: localtime
- mountPath: /etc/localtime
- readOnly: true
- resources:
-{{ toYaml .Values.resources | indent 10 }}
- {{- if .Values.nodeSelector }}
- nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 8 }}
- {{- end -}}
- {{- if .Values.affinity }}
- affinity:
-{{ toYaml .Values.affinity | indent 8 }}
- {{- end }}
-
- volumes:
- - name: hbase-data
- hostPath:
- path: {{ .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
- - name: localtime
- hostPath:
- path: /etc/localtime
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+++ /dev/null
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ include "common.servicename" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ .Release.Name }}
- heritage: {{ .Release.Service }}
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
- - port: {{ .Values.service.internalPort2 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.name }}2
- - port: {{ .Values.service.internalPor3t }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }}
- name: {{ .Values.service.name }}3
- - port: {{ .Values.service.internalPort4 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort4 }}
- name: {{ .Values.service.name }}4
- - port: {{ .Values.service.internalPort5 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort5 }}
- name: {{ .Values.service.name }}5
- - port: {{ .Values.service.internalPort6 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort6 }}
- name: {{ .Values.service.name }}6
- - port: {{ .Values.service.internalPort7 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort7 }}
- name: {{ .Values.service.name }}7
- {{- else -}}
- - port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- - port: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name }}2
- - port: {{ .Values.service.internalPort3 }}
- name: {{ .Values.service.name }}3
- - port: {{ .Values.service.internalPort4 }}
- name: {{ .Values.service.name }}4
- - port: {{ .Values.service.internalPort5 }}
- name: {{ .Values.service.name }}5
- - port: {{ .Values.service.internalPort6 }}
- name: {{ .Values.service.name }}6
- - port: {{ .Values.service.internalPort7 }}
- name: {{ .Values.service.name }}7
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
- clusterIP: None
+++ /dev/null
-# Default values for hbase.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global: # global defaults
- nodePortPrefix: 302
-
-
-# application image
-dockerhubRepository: registry.hub.docker.com
-image: aaionap/hbase:1.2.0
-pullPolicy: Always
-
-# application configuration
-config: {}
-
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- type: ClusterIP
- name: aai-hbase
- internalPort: 2181
- internalPort2: 8080
- internalPort3: 8085
- internalPort4: 9090
- internalPort5: 16000
- internalPort6: 16010
- internalPort7: 16201
-
-
-ingress:
- enabled: false
-
-persistence:
- enabled: true
-
- ## A manually managed Persistent Volume and Claim
- ## Requires persistence.enabled: true
- ## If defined, PVC must be created manually before volume will be bound
- # existingClaim:
- volumeReclaimPolicy: Retain
-
- ## database data Persistent Volume Storage Class
- ## If defined, storageClassName: <storageClass>
- ## If set to "-", storageClassName: "", which disables dynamic provisioning
- ## If undefined (the default) or set to null, no storageClassName spec is
- ## set, choosing the default provisioner. (gp2 on AWS, standard on
- ## GKE, AWS & OpenStack)
- ##
- ## storageClass: "-"
- accessMode: ReadWriteMany
- size: 2Gi
- mountPath: /dockerdata-nfs
- mountSubPath: aai/hbase
-
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
aai.model.proc.max.levels=50
aai.edgeTag.proc.max.levels=50
-# for transaction log
-aai.logging.hbase.interceptor=true
-aai.logging.hbase.enabled=true
-aai.logging.hbase.logrequest=true
-aai.logging.hbase.logresponse=true
-
-# for gremlin server
-aai.server.rebind=g
-hbase.table.name=aailogging.dev
-hbase.table.timestamp.format=YYYYMMdd-HH:mm:ss:SSS
-hbase.zookeeper.quorum=localhost
-hbase.zookeeper.property.clientPort=2181
-hbase.zookeeper.znode.parent=/hbase
-
aai.logging.trace.enabled=true
aai.logging.trace.logrequest=false
aai.logging.trace.logresponse=false
--- /dev/null
+"dynamic_templates":[
+ {
+ "strings":{
+ "match_mapping_type":"string",
+ "match": "*",
+ "mapping":{
+ "type":"text",
+ "fielddata":true
+ }
+ }
+ }
+],
--- /dev/null
+{
+ "attr-translations": [
+ {
+ "from": "\"type\":\"string\",\"index\":\"analyzed\"",
+ "to": "\"type\":\"text\",\"index\":\"true\""
+ },
+ {
+ "from": "\"type\":\"string\",\"index\":\"not_analyzed\"",
+ "to": "\"type\":\"keyword\",\"index\":\"true\""
+ },
+ {
+ "from": "\"type\":\"string\"",
+ "to": "\"type\":\"text\""
+ },
+ {
+ "from": "searchable",
+ "to": "index"
+ }
+ ]
+}
\ No newline at end of file
subPath: elastic-search.properties
name: {{ include "common.fullname" . }}-service-config
- mountPath: /opt/app/search-data-service/config/analysis-config.json
- subPath: filter-config.json
+ subPath: analysis-config.json
+ name: {{ include "common.fullname" . }}-service-config
+ - mountPath: /opt/app/search-data-service/config/es-payload-translation.json
+ subPath: es-payload-translation.json
+ name: {{ include "common.fullname" . }}-service-config
+ - mountPath: /opt/app/search-data-service/config/dynamic-custom-template.json
+ subPath: dynamic-custom-template.json
name: {{ include "common.fullname" . }}-service-config
- mountPath: /opt/app/search-data-service/config/auth/tomcat_keystore
subPath: tomcat_keystore
aai.model.proc.max.levels=50
aai.edgeTag.proc.max.levels=50
-# for transaction log
-aai.logging.hbase.interceptor=true
-aai.logging.hbase.enabled=true
-aai.logging.hbase.logrequest=true
-aai.logging.hbase.logresponse=true
-
-# for gremlin server
-aai.server.rebind=g
-hbase.table.name=aailogging.dev
-hbase.table.timestamp.format=YYYYMMdd-HH:mm:ss:SSS
-hbase.zookeeper.quorum=localhost
-hbase.zookeeper.property.clientPort=2181
-hbase.zookeeper.znode.parent=/hbase
-
aai.logging.trace.enabled=true
aai.logging.trace.logrequest=false
aai.logging.trace.logresponse=false
+++ /dev/null
-current_dir = File.dirname(__FILE__)
-org = ENV['CHEF_ORG'] || "aai-dev"
-env = ENV['AAI_CHEF_ENV'] || "dev"
-env_path = ENV['AAI_CHEF_LOC'] || ""
-node_name "chef-node"
-cookbook_path [ "/var/chef/aai-config/cookbooks" ]
-environment_path "#{env_path}"
-log_level :info
-log_location STDOUT
\ No newline at end of file
+++ /dev/null
-Requires Chef 0.10.0+.
-
-This directory is for Ruby DSL and JSON files for environments.
-It will contain the A&AI environment files.
-For more information see "About Environments" in the Chef documentation:
-
-http://docs.chef.io/environments.html
-
+++ /dev/null
-{
- "name": "simpledemo",
- "description": "Development Environment",
- "cookbook_versions": {
- "aai-traversal-auth" : "= 1.0.0",
- "aai-traversal-config" : "= 1.0.0",
- "aai-traversal-process" : "= 1.0.0",
-
- "aai-resources-auth" : "= 1.0.0",
- "aai-resources-config" : "= 1.0.0",
- "aai-resources-process" : "= 1.0.0"
- },
- "json_class": "Chef::Environment",
- "chef_type": "environment",
- "default_attributes": {
- "aai-traversal-config": {
- "SERVICE_API_VERSION": "1.0.1",
- "SOA_CLOUD_NAMESPACE": "org.openecomp.aai",
- "AJSC_SERVICE_NAMESPACE": "traversal",
- "AFTSWM_ACTION_ARTIFACT_NAME": "traversal",
- "AJSC_JETTY_ThreadCount_MAX": "500",
- "AJSC_JETTY_ThreadCount_MIN": "10",
- "AJSC_SSL_PORT": "8446",
- "AJSC_SVC_PORT": "8083",
- "KEY_MANAGER_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "KEY_STORE_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "MAX_HEAP_SIZE": "2056m",
- "MAX_PERM_SIZE": "512M",
- "MIN_HEAP_SIZE": "2056m",
- "PERM_SIZE": "512M",
- "PRE_JVM_ARGS": "-XX:+UnlockDiagnosticVMOptions -XX:+UnsyncloadClass -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:+UseCMSInitiatingOccupancyOnly -XX:CMSInitiatingOccupancyFraction=70 -XX:+ScavengeBeforeFullGC -XX:+CMSScavengeBeforeRemark -XX:-HeapDumpOnOutOfMemoryError -XX:+UseParNewGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps",
- "AAIENV": "dev",
- "PROJECT_HOME": "/opt/app/aai-traversal",
- "LOGROOT": "/opt/aai/logroot",
- "JAVA_HOME": "/usr/lib/jvm/java-8-openjdk-amd64",
- "AAI_SERVER_URL_BASE": "https:/aai.{{.Release.Namespace}}:8443/aai/",
- "AAI_SERVER_URL": "https:/aai.{{.Release.Namespace}}:8443/aai/v11/",
- "AAI_GLOBAL_CALLBACK_URL": "https:/aai.{{.Release.Namespace}}:8443/aai/",
- "AAI_TRUSTSTORE_FILENAME": "aai_keystore",
- "AAI_TRUSTSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "AAI_KEYSTORE_FILENAME": "aai_keystore",
- "AAI_KEYSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "APPLICATION_SERVERS": "aai.{{.Release.Namespace}}",
- "AAI_DMAAP_PROTOCOL": "http",
- "AAI_DMAAP_HOST_PORT": "message-router.{{.Release.Namespace}}:3904",
- "AAI_DMAAP_TOPIC_NAME": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_STATUS": "UNPROCESSED",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_TYPE": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_DOMAIN": "dev",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SOURCE_NAME": "aai",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEQUENCE_NUMBER": "0",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEVERITY": "NORMAL",
- "AAI_NOTIFICATION_EVENT_DEFAULT_VERSION": "v11",
- "AAI_NOTIFICATION_CURRENT_VERSION": "v11",
- "RESOURCE_VERSION_ENABLE_FLAG": "true",
- "TXN_HBASE_TABLE_NAME": "aailogging.dev",
- "TXN_ZOOKEEPER_QUORUM": "aai-hbase.{{.Release.Namespace}}",
- "TXN_ZOOKEEPER_PROPERTY_CLIENTPORT": "2181",
- "TXN_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "AAI_WORKLOAD_PREFERRED_ROUTE_KEY": "MR1",
- "STORAGE_HOSTNAME": "aai-hbase.{{.Release.Namespace}}",
- "STORAGE_HBASE_TABLE": "aaigraph.dev",
- "STORAGE_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "DB_CACHE_CLEAN_WAIT": "20",
- "DB_CACHE_TIME": "180000",
- "DB_CACHE_SIZE": "0.3",
- "AAI_DEFAULT_API_VERSION": "v11"
- },
- "aai-resources-config": {
- "SERVICE_API_VERSION": "1.0.1",
- "AJSC_SERVICE_NAMESPACE": "aai-resources",
- "AFTSWM_ACTION_ARTIFACT_NAME": "aai-resources",
- "AJSC_JETTY_ThreadCount_MAX": "500",
- "AJSC_JETTY_ThreadCount_MIN": "10",
- "AJSC_SSL_PORT": "8447",
- "AJSC_SVC_PORT": "8087",
- "KEY_MANAGER_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "KEY_STORE_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "MAX_HEAP_SIZE": "2056m",
- "MAX_PERM_SIZE": "512M",
- "MIN_HEAP_SIZE": "2056m",
- "PERM_SIZE": "512M",
- "PRE_JVM_ARGS": "-XX:+UnlockDiagnosticVMOptions -XX:+UnsyncloadClass -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:+UseCMSInitiatingOccupancyOnly -XX:CMSInitiatingOccupancyFraction=70 -XX:+ScavengeBeforeFullGC -XX:+CMSScavengeBeforeRemark -XX:-HeapDumpOnOutOfMemoryError -XX:+UseParNewGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps",
- "AAIENV": "dev",
- "PROJECT_HOME": "/opt/app/aai-resources",
- "LOGROOT": "/opt/aai/logroot",
- "JAVA_HOME": "/usr/lib/jvm/java-8-openjdk-amd64",
- "AAI_SERVER_URL_BASE": "https:/aai.{{.Release.Namespace}}:8443/aai/",
- "AAI_SERVER_URL": "https:/aai.{{.Release.Namespace}}:8443/aai/v11/",
- "AAI_GLOBAL_CALLBACK_URL": "https:/aai.{{.Release.Namespace}}:8443/aai/",
- "AAI_TRUSTSTORE_FILENAME": "aai_keystore",
- "AAI_TRUSTSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "AAI_KEYSTORE_FILENAME": "aai_keystore",
- "AAI_KEYSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "APPLICATION_SERVERS": "aai.{{.Release.Namespace}}",
- "AAI_DMAAP_PROTOCOL": "http",
- "AAI_DMAAP_HOST_PORT": "message-router.{{.Release.Namespace}}:3904",
- "AAI_DMAAP_TOPIC_NAME": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_STATUS": "UNPROCESSED",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_TYPE": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_DOMAIN": "dev",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SOURCE_NAME": "aai",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEQUENCE_NUMBER": "0",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEVERITY": "NORMAL",
- "AAI_NOTIFICATION_EVENT_DEFAULT_VERSION": "v11",
- "AAI_NOTIFICATION_CURRENT_VERSION": "v11",
- "RESOURCE_VERSION_ENABLE_FLAG": "true",
- "TXN_HBASE_TABLE_NAME": "aailogging.dev",
- "TXN_ZOOKEEPER_QUORUM": "aai-hbase.{{.Release.Namespace}}",
- "TXN_ZOOKEEPER_PROPERTY_CLIENTPORT": "2181",
- "TXN_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "AAI_WORKLOAD_PREFERRED_ROUTE_KEY": "MR1",
- "STORAGE_HOSTNAME": "aai-hbase.{{.Release.Namespace}}",
- "STORAGE_HBASE_TABLE": "aaigraph.dev",
- "STORAGE_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "DB_CACHE_CLEAN_WAIT": "20",
- "DB_CACHE_TIME": "180000",
- "DB_CACHE_SIZE": "0.3",
- "AAI_DEFAULT_API_VERSION": "v11"
- }
- },
- "override_attributes": {
- }
-}
+++ /dev/null
-{
- "name": "local",
- "description": "Development Environment",
- "cookbook_versions": {
- "aai-traversal-auth" : "= 1.0.0",
- "aai-traversal-config" : "= 1.0.0",
- "aai-traversal-process" : "= 1.0.0",
-
- "aai-resources-auth" : "= 1.0.0",
- "aai-resources-config" : "= 1.0.0",
- "aai-resources-process" : "= 1.0.0"
- },
- "json_class": "Chef::Environment",
- "chef_type": "environment",
- "default_attributes": {
- "aai-traversal-config": {
- "SERVICE_API_VERSION": "1.0.1",
- "AJSC_SERVICE_NAMESPACE": "traversal",
- "AFTSWM_ACTION_ARTIFACT_NAME": "traversal",
- "AJSC_JETTY_ThreadCount_MAX": "500",
- "AJSC_JETTY_ThreadCount_MIN": "10",
- "AJSC_SSL_PORT": "8446",
- "AJSC_SVC_PORT": "8083",
- "KEY_MANAGER_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "KEY_STORE_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "MAX_HEAP_SIZE": "2056m",
- "MAX_PERM_SIZE": "512M",
- "MIN_HEAP_SIZE": "2056m",
- "PERM_SIZE": "512M",
- "PRE_JVM_ARGS": "-XX:+UnlockDiagnosticVMOptions -XX:+UnsyncloadClass -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:+UseCMSInitiatingOccupancyOnly -XX:CMSInitiatingOccupancyFraction=70 -XX:+ScavengeBeforeFullGC -XX:+CMSScavengeBeforeRemark -XX:-HeapDumpOnOutOfMemoryError -XX:+UseParNewGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps",
- "AAIENV": "dev",
- "PROJECT_HOME": "/opt/app/aai-traversal",
- "LOGROOT": "/opt/aai/logroot",
- "JAVA_HOME": "/usr/lib/jvm/java-8-openjdk-amd64",
- "AAI_SERVER_URL_BASE": "https://localhost:8443/aai/",
- "AAI_SERVER_URL": "https://localhost:8443/aai/v11/",
- "AAI_GLOBAL_CALLBACK_URL": "https://localhost:8443/aai/",
- "AAI_TRUSTSTORE_FILENAME": "aai_keystore",
- "AAI_TRUSTSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "AAI_KEYSTORE_FILENAME": "aai_keystore",
- "AAI_KEYSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "APPLICATION_SERVERS": "localhost",
- "AAI_DMAAP_PROTOCOL": "http",
- "AAI_DMAAP_HOST_PORT": "localhost:3904",
- "AAI_DMAAP_TOPIC_NAME": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_STATUS": "UNPROCESSED",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_TYPE": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_DOMAIN": "dev",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SOURCE_NAME": "aai",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEQUENCE_NUMBER": "0",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEVERITY": "NORMAL",
- "AAI_NOTIFICATION_EVENT_DEFAULT_VERSION": "v11",
- "AAI_NOTIFICATION_CURRENT_VERSION": "v11",
- "RESOURCE_VERSION_ENABLE_FLAG": "true",
- "TXN_HBASE_TABLE_NAME": "aailogging.dev",
- "TXN_ZOOKEEPER_QUORUM": "localhost",
- "TXN_ZOOKEEPER_PROPERTY_CLIENTPORT": "2181",
- "TXN_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "AAI_WORKLOAD_PREFERRED_ROUTE_KEY": "MR1",
- "STORAGE_HOSTNAME": "localhost",
- "STORAGE_HBASE_TABLE": "aaigraph.dev",
- "STORAGE_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "DB_CACHE_CLEAN_WAIT": "20",
- "DB_CACHE_TIME": "180000",
- "DB_CACHE_SIZE": "0.3",
- "AAI_DEFAULT_API_VERSION": "v11"
- },
- "aai-resources-config": {
- "SERVICE_API_VERSION": "1.0.1",
- "AJSC_SERVICE_NAMESPACE": "aai-resources",
- "AFTSWM_ACTION_ARTIFACT_NAME": "aai-resources",
- "AJSC_JETTY_ThreadCount_MAX": "500",
- "AJSC_JETTY_ThreadCount_MIN": "10",
- "AJSC_SSL_PORT": "8447",
- "AJSC_SVC_PORT": "8087",
- "KEY_MANAGER_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "KEY_STORE_PASSWORD": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "MAX_HEAP_SIZE": "2056m",
- "MAX_PERM_SIZE": "512M",
- "MIN_HEAP_SIZE": "2056m",
- "PERM_SIZE": "512M",
- "PRE_JVM_ARGS": "-XX:+UnlockDiagnosticVMOptions -XX:+UnsyncloadClass -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:+UseCMSInitiatingOccupancyOnly -XX:CMSInitiatingOccupancyFraction=70 -XX:+ScavengeBeforeFullGC -XX:+CMSScavengeBeforeRemark -XX:-HeapDumpOnOutOfMemoryError -XX:+UseParNewGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps",
- "AAIENV": "dev",
- "PROJECT_HOME": "/opt/app/aai-resources",
- "LOGROOT": "/opt/aai/logroot",
- "JAVA_HOME": "/usr/lib/jvm/java-8-openjdk-amd64",
- "AAI_SERVER_URL_BASE": "https://localhost:8443/aai/",
- "AAI_SERVER_URL": "https://localhost:8443/aai/v11/",
- "AAI_GLOBAL_CALLBACK_URL": "https://localhost:8443/aai/",
- "AAI_TRUSTSTORE_FILENAME": "aai_keystore",
- "AAI_TRUSTSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "AAI_KEYSTORE_FILENAME": "aai_keystore",
- "AAI_KEYSTORE_PASSWD_X": "OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0",
- "APPLICATION_SERVERS": "localhost",
- "AAI_DMAAP_PROTOCOL": "http",
- "AAI_DMAAP_HOST_PORT": "localhost:3904",
- "AAI_DMAAP_TOPIC_NAME": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_STATUS": "UNPROCESSED",
- "AAI_NOTIFICATION_EVENT_DEFAULT_EVENT_TYPE": "AAI-EVENT",
- "AAI_NOTIFICATION_EVENT_DEFAULT_DOMAIN": "dev",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SOURCE_NAME": "aai",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEQUENCE_NUMBER": "0",
- "AAI_NOTIFICATION_EVENT_DEFAULT_SEVERITY": "NORMAL",
- "AAI_NOTIFICATION_EVENT_DEFAULT_VERSION": "v11",
- "AAI_NOTIFICATION_CURRENT_VERSION": "v11",
- "RESOURCE_VERSION_ENABLE_FLAG": "true",
- "TXN_HBASE_TABLE_NAME": "aailogging.dev",
- "TXN_ZOOKEEPER_QUORUM": "localhost",
- "TXN_ZOOKEEPER_PROPERTY_CLIENTPORT": "2181",
- "TXN_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "AAI_WORKLOAD_PREFERRED_ROUTE_KEY": "MR1",
- "STORAGE_HOSTNAME": "localhost",
- "STORAGE_HBASE_TABLE": "aaigraph.dev",
- "STORAGE_HBASE_ZOOKEEPER_ZNODE_PARENT": "/hbase",
- "DB_CACHE_CLEAN_WAIT": "20",
- "DB_CACHE_TIME": "180000",
- "DB_CACHE_SIZE": "0.3",
- "AAI_DEFAULT_API_VERSION": "v11"
- }
- },
- "override_attributes": {
- }
-}
metadata:
labels:
app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
name: {{ .Release.Name }}
spec:
initContainers:
serviceName: aai-champ
aaiElasticsearch:
serviceName: aai-elasticsearch
- hbase:
- serviceName: aai-hbase
resources:
serviceName: aai-resources
sparkyBe:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+++ /dev/null
-{
- "service": {
- "name": "A&AI HBase Health Check",
- "checks": [
- {
- "id": "hbase-aai",
- "name": "HBase Health Check",
- "http": "http://aai-hbase:8080/status/cluster",
- "method": "GET",
- "header": {
- "Cache-Control": ["no-cache"],
- "Content-Type": ["application/json"],
- "Accept": ["application/json"]
- },
- "tls_skip_verify": true,
- "interval": "15s",
- "timeout": "1s"
- }
- ]
- }
-}
+++ /dev/null
-{
- "service": {
- "name": "A&AI Tabular Data Store",
- "checks": [
- {
- "id": "tabular-backend",
- "name": "Tabular Data Store Operational Test",
- "script": "/consul/scripts/tabular-db-availability.sh",
- "interval": "15s",
- "timeout": "1s"
- }
- ]
- }
-}
+++ /dev/null
-
-# Query the Hbase service for the cluster status.
-GET_CLUSTER_STATUS_RESPONSE=$(curl -si -X GET -H "Accept: text/xml" http://aai-hbase:8080/status/cluster)
-
-if [ -z "$GET_CLUSTER_STATUS_RESPONSE" ]; then
- echo "Tabular store is unreachable."
- return 2
-fi
-
-# Check the resulting status JSON to see if there is a 'DeadNodes' stanza with
-# entries.
-DEAD_NODES=$(echo $GET_CLUSTER_STATUS_RESPONSE | grep "<DeadNodes/>")
-
-if [ -n "$DEAD_NODES" ]; then
- echo "Tabular store is up and accessible."
- return 0
-else
- echo "Tabular store is up but is reporting dead nodes - cluster may be in degraded state."
- return 1
-fi
-# technical_user:
-# api_token: 0123456789technicaluser789abcdef01234567 # must be looooong!
-# reader:
-# password: reader
-# writer:
-# password: writer
+onap:
+ first_name: Steve
+ last_name: McQueen
+ email: steve.mcqueen@onap.org
+ password: onap123$
+ api_token: onceuponatimeiplayedwithnetbox20180814
+ is_staff: true # whether user is admin or not, default = false
+ is_active: true # whether user is active, default = true
+ is_superuser: true # Whether user has all edit rights or not, default = false
\ No newline at end of file
--- /dev/null
+#!/bin/bash
+
+# Create region
+
+echo "Create region: RegionOne"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/dcim/regions/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "RegionOne",
+ "slug": "RegionOne"
+}'
+
+# Create tenant group
+
+echo "Create tenant group: ONAP group"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/tenancy/tenant-groups/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "ONAP group",
+ "slug": "onap-group"
+}'
+
+# Create tenant
+
+echo "Create tenant ONAP in ONAP group"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/tenancy/tenants/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "ONAP",
+ "slug": "onap",
+ "group": 1,
+ "description": "ONAP tenant",
+ "comments": "Tenant for ONAP demo use cases"
+}'
+
+# Create site
+
+echo "Create ONAP demo site: Montreal Lab"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/dcim/sites/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "Montreal Lab D3",
+ "slug": "mtl-lab-d3",
+ "region": 1,
+ "tenant": 1,
+ "facility": "Campus",
+ "time_zone": "Canada/Atlantic",
+ "description": "Site hosting the ONAP use cases",
+ "physical_address": "1 Graham Bell",
+ "shipping_address": "1 Graham Bell",
+ "contact_name": "Alexis",
+ "contact_phone": "0000000000",
+ "contact_email": "adetalhouet89@gmail.com",
+ "comments": "ONAP lab"
+}'
+
+# Create prefixes
+
+echo "Create Prefix for vFW protected network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "192.168.20.0/24",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for protected network - vFW use case"
+}'
+
+echo "Create Prefix for vFW unprotected network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "192.168.10.0/24",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for unprotected network - vFW use case"
+}'
+
+echo "Create Prefix for ONAP general purpose network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "10.0.0.0/8",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for ONAP - general purpose"
+}'
if not User.objects.filter(username=username):
user = User.objects.create_user(
username = username,
- password = user_details.get('password', 0) or User.objects.make_random_password)
+ password = user_details.get('password', 0) or User.objects.make_random_password,
+ is_staff = user_details.get('is_staff', 0) or false,
+ is_superuser = user_details.get('is_superuser', 0) or false,
+ is_active = user_details.get('is_active', 0) or true,
+ first_name = user_details.get('first_name', 0),
+ last_name = user_details.get('last_name', 0),
+ email = user_details.get('email', 0))
print("👤 Created user ",username)
if user_details.get('api_token', 0):
- Token.objects.create(user=user, key=user_details['api_token'])
+ Token.objects.create(user=user, key=user_details['api_token'])
\ No newline at end of file
# limitations under the License.
*/}}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-provisioning-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/provisioning/*").AsConfig . | indent 2 }}
+---
apiVersion: v1
kind: ConfigMap
metadata:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /api/dcim/regions/
+ port: {{ .Values.service.internalPort }}
+ scheme: HTTP
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
env:
- name: DB_PASSWORD
valueFrom:
--- /dev/null
+# Copyright © 2018 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+ name: {{ include "common.fullname" . }}-provisioning
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}-job
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ backoffLimit: 5
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}-provisioning-job
+ release: {{ .Release.Name }}
+ spec:
+ restartPolicy: Never
+ initContainers:
+ - name: {{ include "common.name" . }}-init-readiness
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - netbox-app
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}-provisioning-job
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-provisioning
+ mountPath: /tmp
+ command:
+ - /bin/bash
+ - ./tmp/provision.sh
+ volumes:
+ - name: {{ include "common.fullname" . }}-provisioning
+ configMap:
+ name: {{ include "common.fullname" . }}-provisioning-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Never
napalmTimeout: 10
maxPageSize: 0
superuserName: admin
- superuserEmail: admin@example.com
+ superuserEmail: admin@onap.org
repository: docker.io
image: ninech/netbox:v2.3.5
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
service:
type: ClusterIP
name: netbox-app
global:
nodePortPrefix: 302
commonConfigPrefix: netbox
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
dependencies:
- name: common
version: ~2.0.0
- repository: '@local'
\ No newline at end of file
+ repository: '@local'
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#!/bin/bash
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
dependencies:
- name: common
version: ~2.0.0
# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Service Dependencies
message-router depends on AAF
-dbc-api depends on AAF and Postgresql.
\ No newline at end of file
+dbc-api depends on AAF and Postgresql.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
# Helm Chart for ONAP DMaaP Applications
ONAP includes the following Kubernetes services available in ONAP Beijing Release (more expected in future):
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
DMAAPBC_WAIT_TO_EXIT=Y
DMAAPBC_PG_ENABLED=true
# Need to connect to PG primary service, designated by service.name2
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{- end}}
selector:
app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
\ No newline at end of file
+ release: {{ .Release.Name }}
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
sources:
- https://gerrit.onap.org/r/#/admin/projects/
icon: https://wiki.onap.org/download/thumbnails/1015829/onap_704x271%20copy.png?version=1&modificationDate=1488326334000&api=v2
-tillerVersion: "~2.8.2"
+tillerVersion: "~2.9.1"
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# ONAP
# ================================================================================
# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# ONAP
# ================================================================================
# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright 2018 AT&T Intellectual Property. All rights reserved
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada, AT&T
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
filebeat.prospectors:
#it is mandatory, in our case it's log
- input_type: log
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
nameOverride: brmsgw
nexus:
nameOverride: nexus
- policy-apex-pdp:
- nameOverride: policy-apex-pdp
#################################################################
# Application configuration defaults.
nameOverride: brmsgw
nexus:
nameOverride: nexus
-policy-apex-pdp:
- nameOverride: policy-apex-pdp
# flag to enable debugging - application support required
debugEnabled: false
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
apiVersion: v1
-description: ONAP Service Design and Creation Common Workflow Design
-name: sdc-wfd
-version: 2.0.0
\ No newline at end of file
+description: ONAP POMBA AAI Context Builder
+name: pomba-aaictxbuilder
+version: 2.0.0
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+server.contextPath=/aaicontextbuilder
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-spare-threads=25
+
+# AAI REST Client Configuration
+aai.serviceName={{ .Values.config.aaiServiceName }}.{{.Release.Namespace}}
+aai.servicePort={{ .Values.config.aaiPort }}
+aai.username={{ .Values.config.aaiUsername }}
+aai.password={{ .Values.config.aaiPassword }}
+aai.httpProtocol={{ .Values.config.aaiHttpProtocol }}
+aai.connectionTimeout={{ .Values.config.aaiConnectionTimeout }}
+aai.readTimeout={{ .Values.config.aaiReadTimeout }}
+
+# HTTP Basic Authorization credentials for Rest Service API
+http.userId={{ .Values.config.httpUserId }}
+http.password={{ .Values.config.httpPassword }}
+
+# {0} = customerId {1} = serviceType {2} = serviceInstanceId
+aai.serviceInstancePath=/aai/v11/business/customers/customer/{0}/service-subscriptions/service-subscription/{1}/service-instances/service-instance/{2}
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
--- /dev/null
+<configuration scan="true" scanPeriod="10 seconds" debug="false">
+ <jmxConfigurator />
+ <property name="logDirectory" value="/var/log/onap/pomba-aaictxbuilder" />
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <!-- filter class="ch.qos.logback.classic.filter.LevelFilter"> <level>ERROR</level>
+ <onMatch>ACCEPT</onMatch> <onMismatch>DENY</onMismatch> </filter -->
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+ </pattern>
+ </encoder>
+ </appender>
+
+ <appender name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%date{"yyyy-MM-dd'T'HH:mm:ss,SSSXXX", UTC}|%X{RequestId}|%.20thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDescription}|%msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/error.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%date{"yyyy-MM-dd'T'HH:mm:ss,SSSXXX",UTC}|%X{RequestId}|%.20thread|%.-5level|%logger{36}|%msg%n</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>10MB</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>5</maxHistory>
+ </rollingPolicy>
+ </appender>
+
+ <appender name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+
+ <!-- CLDS related loggers -->
+ <logger name="org.onap.pomba.clds" level="INFO" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger name="com.att.eelf.error" level="OFF" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger name="com.att.eelf.audit" level="INFO" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="DEBUG" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger name="com.att.eelf.security" level="DEBUG" additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="WARN" />
+ <logger name="org.springframework.beans" level="WARN" />
+ <logger name="org.springframework.web" level="WARN" />
+ <logger name="com.blog.spring.jms" level="WARN" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="net.sf" level="WARN" />
+ <logger name="org.apache.commons.httpclient" level="WARN" />
+ <logger name="org.apache.commons" level="WARN" />
+ <logger name="org.apache.coyote" level="WARN" />
+ <logger name="org.apache.jasper" level="WARN" />
+
+ <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
+ May aid in troubleshooting) -->
+ <logger name="org.apache.camel" level="WARN" />
+ <logger name="org.apache.cxf" level="WARN" />
+ <logger name="org.apache.camel.processor.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.service" level="WARN" />
+ <logger name="org.restlet" level="DEBUG" />
+ <logger name="org.apache.camel.component.restlet" level="DEBUG" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="INFO" />
+ <logger name="ch.qos.logback.core" level="INFO" />
+
+ <!-- logback jms appenders & loggers definition starts here -->
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <logger name="AuditRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="AuditRecord_DirectCall" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="WARN">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+
+</configuration>
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - mountPath: /opt/app/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # Filebeat sidecar container
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-pomba-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+
+
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/pomba-aai-context-builder:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ aaiServiceName: aai
+ aaiPort: 8443
+ aaiUsername: AAI
+ aaiPassword: OBF:1gfr1ev31gg7
+ aaiHttpProtocol: http
+ aaiConnectionTimeout: 5000
+ aaiReadTimeout: 1000
+ # HTTP Basic Authorization credentials for Rest Service API
+ httpUserId: admin
+ httpPassword: OBF:1u2a1toa1w8v1tok1u30
+
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9530
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+apiVersion: v1\r
+description: ONAP POMBA Network Discovery\r
+name: pomba-networkdiscovery\r
+version: 2.0.0\r
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+dependencies:\r
+ - name: common\r
+ version: ~2.0.0\r
+ repository: '@local'\r
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+
+server.contextPath=/network-discovery
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+
+# Basic Authentication
+basicAuth.username={{ .Values.config.networkDiscoveryUserId }}
+basicAuth.password={{ .Values.config.networkDiscoveryPassword }}
+
+# A&AI Enircher REST Client Configuration
+enricher.url=https://<enricher_host_or_IP>:<port>
+enricher.connectionTimeout=5000
+enricher.readTimeout=60000
+enricher.keyStorePath=config/auth/enricher-client-cert.p12
+enricher.keyStorePassword=OBF:1i9a1u2a1unz1lr61wn51wn11lss1unz1u301i6o
+
+enricher.types = vserver, l3-network
+enricher.type.vserver.url = /enricher/v11/cloud-infrastructure/vservers/vserver/{0}?sot=!aai
+enricher.type.l3-network.url = /enricher/v11/network/l3-networks/l3-network/{0}?sot=!aai
+
--- /dev/null
+<configuration>\r
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>\r
+ <property name="p_lvl" value="%level"/>\r
+ <property name="p_log" value="%logger"/>\r
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>\r
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
+ <!-- tabs -->\r
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
+ <property name="p_thr" value="%thread"/>\r
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>\r
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <appender name="FILE" class="ch.qos.logback.core.FileAppender">\r
+ <file>output.log</file>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <logger level="INFO" name="org.onap.logging.ref.slf4j" additivity="false">\r
+ <appender-ref ref="STDOUT" />\r
+ <appender-ref ref="FILE" />\r
+ </logger>\r
+ <root level="INFO">\r
+ <appender-ref ref="STDOUT" />\r
+ </root>\r
+</configuration>\r
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+#\r
+\r
+apiVersion: v1\r
+kind: ConfigMap\r
+metadata:\r
+ name: {{ include "common.fullname" . }}-log\r
+ namespace: {{ include "common.namespace" . }}\r
+data:\r
+{{ tpl (.Files.Glob "resources/config/log/logback.xml").AsConfig . | indent 2 }}\r
+---\r
+apiVersion: v1\r
+kind: ConfigMap\r
+metadata:\r
+ name: {{ include "common.fullname" . }}-configmap\r
+ namespace: {{ include "common.namespace" . }}\r
+data:\r
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}\r
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+apiVersion: extensions/v1beta1\r
+kind: Deployment\r
+metadata:\r
+ name: {{ include "common.fullname" . }}\r
+ namespace: {{ include "common.namespace" . }}\r
+ labels:\r
+ app: {{ include "common.name" . }}\r
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}\r
+ release: {{ .Release.Name }}\r
+ heritage: {{ .Release.Service }}\r
+spec:\r
+ replicas: {{ .Values.replicaCount }}\r
+ template:\r
+ metadata:\r
+ labels:\r
+ app: {{ include "common.name" . }}\r
+ release: {{ .Release.Name }}\r
+ spec:\r
+ containers:\r
+ - name: {{ include "common.name" . }}\r
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"\r
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}\r
+ ports:\r
+ - containerPort: {{ .Values.service.internalPort }}\r
+ # disable liveness probe when breakpoints set in debugger\r
+ # so K8s doesn't restart unresponsive container\r
+ {{ if .Values.liveness.enabled }}\r
+ livenessProbe:\r
+ tcpSocket:\r
+ port: {{ .Values.service.internalPort }}\r
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}\r
+ periodSeconds: {{ .Values.liveness.periodSeconds }}\r
+ {{ end }}\r
+ readinessProbe:\r
+ tcpSocket:\r
+ port: {{ .Values.service.internalPort }}\r
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}\r
+ periodSeconds: {{ .Values.readiness.periodSeconds }}\r
+ env:\r
+ volumeMounts:\r
+ - mountPath: /etc/localtime\r
+ name: localtime\r
+ readOnly: true\r
+ - name: {{ include "common.fullname" . }}-logs\r
+ mountPath: /var/log/onap\r
+ - mountPath: /opt/app/config/logback.xml\r
+ name: {{ include "common.fullname" . }}-log-conf\r
+ subPath: logback.xml\r
+ - mountPath: /opt/app/config/application.properties\r
+ name: {{ include "common.fullname" . }}-config\r
+ subPath: application.properties\r
+ readOnly: true\r
+ - mountPath: /opt/app/config/auth/enricher-client-cert.p12\r
+ name: {{ include "common.fullname" . }}-auth-secret\r
+ subPath: enricher-client-cert.p12\r
+ readOnly: true\r
+\r
+ resources:\r
+{{ toYaml .Values.resources | indent 12 }}\r
+ {{- if .Values.nodeSelector }}\r
+ nodeSelector:\r
+{{ toYaml .Values.nodeSelector | indent 10 }}\r
+ {{- end -}}\r
+ {{- if .Values.affinity }}\r
+ affinity:\r
+{{ toYaml .Values.affinity | indent 10 }}\r
+ {{- end }}\r
+\r
+ # Filebeat sidecar container\r
+ - name: {{ include "common.name" . }}-filebeat-onap\r
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"\r
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}\r
+ volumeMounts:\r
+ - name: {{ include "common.fullname" . }}-filebeat-conf\r
+ mountPath: /usr/share/filebeat/filebeat.yml\r
+ subPath: filebeat.yml\r
+ - name: {{ include "common.fullname" . }}-data-filebeat\r
+ mountPath: /usr/share/filebeat/data\r
+ - name: {{ include "common.fullname" . }}-logs\r
+ mountPath: /var/log/onap\r
+\r
+ volumes:\r
+ - name: localtime\r
+ hostPath:\r
+ path: /etc/localtime\r
+ - name: {{ include "common.fullname" . }}-logs\r
+ emptyDir: {}\r
+ - name: {{ include "common.fullname" . }}-log-conf\r
+ configMap:\r
+ name: {{ include "common.fullname" . }}-log\r
+ - name: {{ include "common.fullname" . }}-config\r
+ configMap:\r
+ name: {{ include "common.fullname" . }}-configmap\r
+ - name: {{ include "common.fullname" . }}-auth-secret\r
+ secret:\r
+ secretName: {{ include "common.fullname" . }}-auth\r
+ - name: {{ include "common.fullname" . }}-filebeat-conf\r
+ configMap:\r
+ name: {{ .Release.Name }}-pomba-filebeat-configmap\r
+ - name: {{ include "common.fullname" . }}-data-filebeat\r
+ emptyDir: {}\r
+\r
+ imagePullSecrets:\r
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"\r
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+apiVersion: v1\r
+kind: Secret\r
+metadata:\r
+ name: {{ include "common.fullname" . }}-auth\r
+ namespace: {{ include "common.namespace" . }}\r
+ labels:\r
+ app: {{ include "common.name" . }}\r
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}\r
+ release: {{ .Release.Name }}\r
+ heritage: {{ .Release.Service }}\r
+data:\r
+{{ (.Files.Glob "resources/config/auth/*").AsSecrets | indent 2 }}\r
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+apiVersion: v1\r
+kind: Service\r
+metadata:\r
+ name: {{ include "common.servicename" . }}\r
+ namespace: {{ include "common.namespace" . }}\r
+ labels:\r
+ app: {{ include "common.name" . }}\r
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}\r
+ release: {{ .Release.Name }}\r
+ heritage: {{ .Release.Service }}\r
+spec:\r
+ type: {{ .Values.service.type }}\r
+ ports:\r
+ {{if eq .Values.service.type "NodePort" -}}\r
+ - port: {{ .Values.service.externalPort }}\r
+ #Example internal target port if required\r
+ #targetPort: {{ .Values.service.internalPort }}\r
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}\r
+ name: {{ .Values.service.portName | default "http" }}\r
+ {{- else -}}\r
+ - port: {{ .Values.service.externalPort }}\r
+ targetPort: {{ .Values.service.internalPort }}\r
+ name: {{ .Values.service.portName | default "http" }}\r
+ {{- end}}\r
+ selector:\r
+ app: {{ include "common.name" . }}\r
+ release: {{ .Release.Name }}\r
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+#################################################################\r
+# Global configuration defaults.\r
+#################################################################\r
+global:\r
+ nodePortPrefix: 302\r
+ repository: nexus3.onap.org:10001\r
+\r
+#################################################################\r
+# Application configuration defaults.\r
+#################################################################\r
+# application image\r
+repository: nexus3.onap.org:10001\r
+image: onap/network-discovery:latest\r
+pullPolicy: Always\r
+\r
+# flag to enable debugging - application support required\r
+debugEnabled: false\r
+\r
+# application configuration\r
+# Example:\r
+config:\r
+ # Network Discovery Micro Service REST Client Configuration\r
+ # Basic Authorization credentials for Network Discovery Micro Service Rest Service\r
+ networkDiscoveryUserId: admin\r
+ networkDiscoveryPassword: OBF:1u2a1toa1w8v1tok1u30\r
+\r
+# default number of instances\r
+replicaCount: 1\r
+\r
+nodeSelector: {}\r
+\r
+affinity: {}\r
+\r
+# probe configuration parameters\r
+liveness:\r
+ initialDelaySeconds: 10\r
+ periodSeconds: 10\r
+ # necessary to disable liveness probe when setting breakpoints\r
+ # in debugger so K8s doesn't restart unresponsive container\r
+ enabled: true\r
+\r
+readiness:\r
+ initialDelaySeconds: 10\r
+ periodSeconds: 10\r
+\r
+#Example service definition with external, internal and node ports.\r
+service:\r
+ # The default service name (exposed in the service.yaml) will be the same\r
+ # name as the chart. If the service name needs to be overriden (such as\r
+ # when a subchart is shared), uncomment the value below.\r
+ #name: <service-name-override>\r
+\r
+ #Services may use any combination of ports depending on the 'type' of\r
+ #service being defined.\r
+ type: ClusterIP\r
+ externalPort: 9531\r
+ internalPort: 8080\r
+# nodePort: <replace with unused node port suffix eg. 23>\r
+ # optional port name override - default can be defined in service.yaml\r
+ #portName: http\r
+\r
+ingress:\r
+ enabled: false\r
+\r
+resources: {}\r
+ # We usually recommend not to specify default resources and to leave this as a conscious\r
+ # choice for the user. This also increases chances charts run on environments with little\r
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following\r
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.\r
+ #\r
+ # Example:\r
+ # Configure resource requests and limits\r
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/\r
+ # Minimum memory for development is 2 CPU cores and 4GB memory\r
+ # Minimum memory for production is 4 CPU cores and 8GB memory\r
+#resources:\r
+# limits:\r
+# cpu: 2\r
+# memory: 4Gi\r
+# requests:\r
+# cpu: 2\r
+# memory: 4Gi\r
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP POMBA Network Discovery Context Builder
+name: pomba-networkdiscoveryctxbuilder
+version: 2.0.0
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+
+server.contextPath=/network-discovery
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+
+# Network Discovery Context Builder REST Service
+networkDiscoveryCtxBuilder.httpProtocol={{ .Values.config.networkDiscoveryCtxBuilderHttpProtocol }}
+networkDiscoveryCtxBuilder.port={{ .Values.config.networkDiscoveryCtxBuilderPort }}
+# Basic Authorization credentials for Network Discovery Context Builder REST Service
+networkDiscoveryCtxBuilder.userId={{ .Values.config.networkDiscoveryCtxBuilderUserId }}
+networkDiscoveryCtxBuilder.password={{ .Values.config.networkDiscoveryCtxBuilderPassword }}
+networkDiscoveryCtxBuilder.resourceList={{ .Values.config.networkDiscoveryCtxBuilderResourceList }}
+
+# Service Decomposition REST Client Configuration
+serviceDecomposition.httpProtocol={{ .Values.config.serviceDecompositionHttpProtocol }}
+serviceDecomposition.host={{ .Values.config.serviceDecompositionServiceName }}.{{.Release.Namespace}}
+serviceDecomposition.port={{ .Values.config.serviceDecompositionPort }}
+serviceDecomposition.serviceInstancePath={{ .Values.config.serviceDecompositionInstancePath }}
+#Basic Authorization Client credentials for Service Decomposition REST service
+serviceDecomposition.userId={{ .Values.config.serviceDecompositionUserId }}
+serviceDecomposition.password={{ .Values.config.serviceDecompositionPassword }}
+
+# Network Discovery Micro Service REST Client Configuration
+
+networkDiscoveryMicroService.host={{ .Values.config.networkDiscoveryServiceName }}.{{.Release.Namespace}}
+networkDiscoveryMicroService.port={{ .Values.config.networkDiscoveryPort }}
+networkDiscoveryMicroService.httpProtocol={{ .Values.config.networkDiscoveryHttpProtocol }}
+networkDiscoveryMicroService.networkDiscoveryPath={{ .Values.config.networkDiscoveryPath }}
+# Wait for Network Discovery MicroService response in milliseconds
+networkDiscoveryMicroService.responseTimeOutInMilliseconds = {{ .Values.config.networkDiscoveryTimeOutInMilliseconds }}
+# Basic Authorization credentials for Network Discovery Micro Service Rest Service
+networkDiscoveryMicroService.userId={{ .Values.config.networkDiscoveryUserId }}
+networkDiscoveryMicroService.password={{ .Values.config.networkDiscoveryPassword }}
+
+#Servlet context parameters
+server.context_parameters.p-name=value
--- /dev/null
+<configuration scan="true" scanPeriod="10 seconds" debug="false">
+ <jmxConfigurator />
+ <property resource="application.properties" />
+ <property name="logDirectory" value="/var/log/onap/pomba-networkdiscoveryctxbuilder" />
+ <!-- Example evaluator filter applied against console appender -->
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <!-- filter class="ch.qos.logback.classic.filter.LevelFilter"> <level>ERROR</level>
+ <onMatch>ACCEPT</onMatch> <onMismatch>DENY</onMismatch> </filter -->
+ <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+ </pattern>
+ </encoder>
+ </appender>
+
+ <appender name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%date{"yyyy-MM-dd'T'HH:mm:ss,SSSXXX", UTC}|%X{RequestId}|%.20thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDescription}|%msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/error.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%date{"yyyy-MM-dd'T'HH:mm:ss,SSSXXX",UTC}|%X{RequestId}|%.20thread|%.-5level|%logger{36}|%msg%n</pattern>
+ </encoder>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>10MB</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>5</maxHistory>
+ </rollingPolicy>
+ </appender>
+
+ <appender name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+
+ <!-- CLDS related loggers -->
+ <logger name="org.onap.pomba.clds" level="INFO" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger name="com.att.eelf.error" level="OFF" additivity="true">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger name="com.att.eelf.audit" level="INFO" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger name="com.att.eelf.metrics" level="DEBUG" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger name="com.att.eelf.security" level="DEBUG" additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+
+ <!-- Spring related loggers -->
+ <logger name="org.springframework" level="WARN" />
+ <logger name="org.springframework.beans" level="WARN" />
+ <logger name="org.springframework.web" level="WARN" />
+ <logger name="com.blog.spring.jms" level="WARN" />
+
+ <!-- Other Loggers that may help troubleshoot -->
+ <logger name="net.sf" level="WARN" />
+ <logger name="org.apache.commons.httpclient" level="WARN" />
+ <logger name="org.apache.commons" level="WARN" />
+ <logger name="org.apache.coyote" level="WARN" />
+ <logger name="org.apache.jasper" level="WARN" />
+
+ <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
+ May aid in troubleshooting) -->
+ <logger name="org.apache.camel" level="WARN" />
+ <logger name="org.apache.cxf" level="WARN" />
+ <logger name="org.apache.camel.processor.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+ <logger name="org.apache.cxf.service" level="WARN" />
+ <logger name="org.restlet" level="DEBUG" />
+ <logger name="org.apache.camel.component.restlet" level="DEBUG" />
+
+ <!-- logback internals logging -->
+ <logger name="ch.qos.logback.classic" level="INFO" />
+ <logger name="ch.qos.logback.core" level="INFO" />
+
+ <!-- logback jms appenders & loggers definition starts here -->
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <logger name="AuditRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="AuditRecord_DirectCall" level="INFO" additivity="FALSE">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="WARN">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+
+</configuration>
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - mountPath: /opt/app/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ readOnly: true
+ subPath: application.properties
+
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # Filebeat sidecar container
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-pomba-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+
+
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/pomba-network-discovery-context-builder:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ # Network Discovery Context Builder REST Service
+ networkDiscoveryCtxBuilderHttpProtocol: http
+ networkDiscoveryCtxBuilderPort: 8080
+ networkDiscoveryCtxBuilderUserId: admin
+ networkDiscoveryCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
+ networkDiscoveryCtxBuilderResourceList: vnfcs,vservers,l3-networks
+
+ # Service Decomposition REST Client Configuration
+ serviceDecompositionHttpProtocol: http
+ serviceDecompositionServiceName: pomba-servicedecomposition
+ serviceDecompositionPort: 8080
+ serviceDecompositionInstancePath: /service-decomposition/service/context
+ #Basic Authorization Client credentials for Service Decomposition REST service
+ serviceDecompositionUserId: admin
+ serviceDecompositionPassword: OBF:1u2a1toa1w8v1tok1u30
+
+ # Network Discovery Micro Service REST Client Configuration
+ networkDiscoveryServiceName: pomba-networkdiscovery
+ networkDiscoveryPort: 8080
+ networkDiscoveryHttpProtocol: http
+ networkDiscoveryPath: /network-discovery/v1/network/resource
+ # Wait for Network Discovery MicroService response in milliseconds
+ networkDiscoveryTimeOutInMilliseconds: 60000
+ # Basic Authorization credentials for Network Discovery Micro Service Rest Service
+ networkDiscoveryUserId: admin
+ networkDiscoveryPassword: OBF:1u2a1toa1w8v1tok1u30
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9530
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP POMBA SDC Context Builder
+name: pomba-sdcctxbuilder
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+This directory contains all external configuration files that
+need to be mounted into an application container.
+
+See the configmap.yaml in the templates directory for an example
+of how to load (ie map) config files from this directory, into
+Kubernetes, for distribution within the k8s cluster.
+
+See deployment.yaml in the templates directory for an example
+of how the 'config mapped' files are then mounted into the
+containers.
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+server.contextPath=/sdccontextbuilder
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#server.port=9191
+
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+#Application properties
+sdcConnect.username={{ .Values.config.sdcUsername }}
+sdcConnect.password={{ .Values.config.sdcPassword }}
+sdcConnect.consumerID={{ .Values.config.sdcConsumerId }}
+sdcConnect.sdcAddress={{ .Values.config.sdcServiceName }}.{{.Release.Namespace}}:{{ .Values.config.sdcPort }}
+
+# Minimum timeout value is 15 seconds; default is 120000s
+sdcConnect.timeout.seconds=12000
+
+# {0} = UUID
+sdc.url.template=/sdc/v1/catalog/services/{0}/toscaModel
+sdc.artifact.type=TOSCA_CSAR
+
+# Intended name for downloaded temporary CSAR files: csar-[UUID].zip
+# Only .zip and .csar are accepted extensions, default is .zip
+sdc.csar.file.prefix=csar-
+sdc.csar.file.suffix=.zip
+
+# HTTP Basic Authorization credentials for Rest Service API
+http.userId={{ .Values.config.sdcCtxBuilderUserId }}
+http.password={{ .Values.config.sdcCtxBuilderPassword }}
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+
+#test.tosca.csar.file=\\config\\toscaModel.csar.zip
name: {{ include "common.fullname" . }}-configmap
namespace: {{ include "common.namespace" . }}
data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+# readinessRepository: oomk8s
+# readinessImage: readiness-check:2.0.0
+# loggingRepository: docker.elastic.co
+# loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/pomba-sdc-context-builder:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ #Application properties
+ sdcUsername: pomba
+ sdcPassword: OBF:1uha1uh81w8v1ugi1ugg
+ sdcConsumerId: pomba
+ sdcServiceName: sdc-be
+ sdcPort: 30204
+ # HTTP Basic Authorization credentials for Rest Service API
+ sdcCtxBuilderUserId: admin
+ sdcCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9530
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+apiVersion: v1\r
+description: ONAP POMBA Network Discovery Service Decomposition\r
+name: pomba-servicedecomposition\r
+version: 2.0.0\r
--- /dev/null
+# Copyright � 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+dependencies:\r
+ - name: common\r
+ version: ~2.0.0\r
+ repository: '@local'\r
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+
+server.contextPath=/service-decomposition
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+basicAuth.username={{ .Values.config.serviceDecompositionUserId }}
+basicAuth.password={{ .Values.config.serviceDecompositionPassword }}
+
+# AAI REST Client Configuration
+aai.host=127.0.0.1
+aai.port=8443
+aai.httpProtocol=http
+aai.trustStorePath=tomcat_keystore
+aai.keyStorePath=aai-client-cert.p12
+aai.keyStorePassword=OBF:1i9a1u2a1unz1lr61wn51wn11lss1unz1u301i6o
+aai.keyManagerFactoryAlgorithm=SunX509
+aai.keyStoreType=PKCS12
+aai.securityProtocol=TLS
+aai.connectionTimeout=5000
+aai.readTimeout=1000
+aai.resourceList=vnfc,vserver,l3-network
+aai.serviceInstancePath=/aai/v13/nodes/service-instance/{0}
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+
--- /dev/null
+<configuration>\r
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>\r
+ <property name="p_lvl" value="%level"/>\r
+ <property name="p_log" value="%logger"/>\r
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>\r
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
+ <!-- tabs -->\r
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>\r
+ <property name="p_thr" value="%thread"/>\r
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>\r
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <appender name="FILE" class="ch.qos.logback.core.FileAppender">\r
+ <file>output.log</file>\r
+ <encoder>\r
+ <pattern>${pattern}</pattern>\r
+ </encoder>\r
+ </appender>\r
+ <logger level="INFO" name="org.onap.logging.ref.slf4j" additivity="false">\r
+ <appender-ref ref="STDOUT" />\r
+ <appender-ref ref="FILE" />\r
+ </logger>\r
+ <root level="INFO">\r
+ <appender-ref ref="STDOUT" />\r
+ </root>\r
+</configuration>\r
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/logback.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - mountPath: /opt/app/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # Filebeat sidecar container
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-pomba-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs\r
+#\r
+# Licensed under the Apache License, Version 2.0 (the "License");\r
+# you may not use this file except in compliance with the License.\r
+# You may obtain a copy of the License at\r
+#\r
+# http://www.apache.org/licenses/LICENSE-2.0\r
+#\r
+# Unless required by applicable law or agreed to in writing, software\r
+# distributed under the License is distributed on an "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+# See the License for the specific language governing permissions and\r
+# limitations under the License.\r
+\r
+#################################################################\r
+# Global configuration defaults.\r
+#################################################################\r
+global:\r
+ nodePortPrefix: 302\r
+ repository: nexus3.onap.org:10001\r
+\r
+#################################################################\r
+# Application configuration defaults.\r
+#################################################################\r
+# application image\r
+repository: nexus3.onap.org:10001\r
+image: onap/service-decomposition:latest\r
+pullPolicy: Always\r
+\r
+# flag to enable debugging - application support required\r
+debugEnabled: false\r
+\r
+# application configuration\r
+# Example:\r
+config:\r
+ # Service Decomposition REST Client Configuration\r
+ # Basic Authorization Client credentials for Service Decomposition REST service\r
+ serviceDecompositionUserId: admin\r
+ serviceDecompositionPassword: OBF:1u2a1toa1w8v1tok1u30\r
+\r
+# default number of instances\r
+replicaCount: 1\r
+\r
+nodeSelector: {}\r
+\r
+affinity: {}\r
+\r
+# probe configuration parameters\r
+liveness:\r
+ initialDelaySeconds: 10\r
+ periodSeconds: 10\r
+ # necessary to disable liveness probe when setting breakpoints\r
+ # in debugger so K8s doesn't restart unresponsive container\r
+ enabled: true\r
+\r
+readiness:\r
+ initialDelaySeconds: 10\r
+ periodSeconds: 10\r
+\r
+#Example service definition with external, internal and node ports.\r
+service:\r
+ # The default service name (exposed in the service.yaml) will be the same\r
+ # name as the chart. If the service name needs to be overriden (such as\r
+ # when a subchart is shared), uncomment the value below.\r
+ #name: <service-name-override>\r
+\r
+ #Services may use any combination of ports depending on the 'type' of\r
+ #service being defined.\r
+ type: ClusterIP\r
+ externalPort: 9532\r
+ internalPort: 8080\r
+# nodePort: <replace with unused node port suffix eg. 23>\r
+ # optional port name override - default can be defined in service.yaml\r
+ #portName: http\r
+\r
+ingress:\r
+ enabled: false\r
+\r
+resources: {}\r
+ # We usually recommend not to specify default resources and to leave this as a conscious\r
+ # choice for the user. This also increases chances charts run on environments with little\r
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following\r
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.\r
+ #\r
+ # Example:\r
+ # Configure resource requests and limits\r
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/\r
+ # Minimum memory for development is 2 CPU cores and 4GB memory\r
+ # Minimum memory for production is 4 CPU cores and 8GB memory\r
+#resources:\r
+# limits:\r
+# cpu: 2\r
+# memory: 4Gi\r
+# requests:\r
+# cpu: 2\r
+# memory: 4Gi\r
# limitations under the License.
apiVersion: v1
-description: ONAP Activity Spec WebService
-name: sdc-act
-version: 2.0.0
\ No newline at end of file
+description: POMBA Validaton-Service
+name: pomba-validation-service
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
--- /dev/null
+This directory contains all external configuration files that
+need to be mounted into an application container.
+
+See the configmap.yaml in the templates directory for an example
+of how to load (ie map) config files from this directory, into
+Kubernetes, for distribution within the k8s cluster.
+
+See deployment.yaml in the templates directory for an example
+of how the 'config mapped' files are then mounted into the
+containers.
--- /dev/null
+host=dummy-host.onap.org
+port=8443
+httpProtocol=https
+trustStorePath=/auth/tomcat_keystore
+#trustStorePassword intentionally left blank
+trustStorePassword.x=
+keyStorePath=/auth/client-cert-onap.p12
+keyStorePassword.x=dfcfd1003bdde18de8efea3c8661510e
+keyManagerFactoryAlgorithm=SunX509
+keyStoreType=PKCS12
+securityProtocol=TLS
+connectionTimeout=5000
+readTimeout=1000
+
+baseModelURI=/aai/v8/service-design-and-creation/models/model
--- /dev/null
+{"roles": [
+ {
+ "name": "admin",
+ "functions": [
+ {
+ "name": "actions",
+ "methods": [
+ {"name": "GET"},
+ {"name": "DELETE"},
+ {"name": "PUT"}
+ ]
+ },
+ {
+ "name": "validate",
+ "methods": [{"name": "POST"}]
+ }
+ ],
+ "users": [
+ {"username": "CN=common-name, OU=org-unit, O=org, L=location, ST=state, C=US"},
+ {"username": "CN=test, OU=qa, O=Test Ltd, L=London, ST=London, C=GB"},
+ {"username": "CN=aai-client.dev.att.com, OU=aai digicert client dev, O=\"AT&T Services, Inc.\", L=Dallas, ST=Texas, C=US"}
+ ]
+ },
+ {
+ "name": "ops",
+ "functions": [{
+ "name": "actions",
+ "methods": [{"name": "POST"}]
+ }],
+ "users": [
+ {"username": "CN=common-name, OU=org-unit, O=org, L=location, ST=state, C=US"},
+ {"username": "CN=test, OU=qa, O=Test Ltd, L=London, ST=London, C=GB"}
+ ]
+ },
+ {
+ "name": "basicauth",
+ "functions": [{
+ "name": "util",
+ "methods": [{"name": "GET"}]
+ }],
+ "users": [{
+ "user": "aai",
+ "pass": "OBF:1u2a1t2v1vgb1s3g1s3m1vgj1t3b1u30"
+ }]
+ }
+]}
--- /dev/null
+rule.indexing.events=POA-EVENT
+rule.indexing.exclude.oxm.validation=POA-EVENT
+rule.indexing.key.attributes=$.poa-event.modelVersionId,$.poa-event.modelInvariantId
+rule.indexing.default.key=default-rules
--- /dev/null
+# Properties for the SchemaLocationsBean
+# The AAI Schema jar will be unpacked to bundleconfig/etc
+schemaConfig=bundleconfig
+# Files named aai_oxm_v*.xml are unpacked here:
+nodeDir=${APP_HOME}/bundleconfig/etc/oxm
+# Dummy folder/directory:
+edgeDir=${APP_HOME}/bundleconfig/etc/oxm
--- /dev/null
+# ============LICENSE_START===================================================
+# Copyright (c) 2018 Amdocs
+# ============================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=====================================================
+
+poa-audit-result.name=POA-AUDIT-RESULT
+poa-audit-result.host=message-router:3904
+poa-audit-result.publisher.partition=1
+poa-audit-result.username=
+poa-audit-result.password=
+poa-audit-result.transport.type=HTTPAUTH
--- /dev/null
+# ============LICENSE_START===================================================
+# Copyright (c) 2018 Amdocs
+# ============================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=====================================================
+
+poa-rule-validation.name=POA-RULE-VALIDATION
+poa-rule-validation.host=message-router:3904
+poa-rule-validation.username=
+poa-rule-validation.password=
+poa-rule-validation.consumer.group=poa-validator-test
+poa-rule-validation.consumer.id=test
+poa-rule-validation.transport.type=HTTPAUTH
--- /dev/null
+auth.policy.file=${CONFIG_HOME}/auth_policy.json
+auth.authentication.disable=false
--- /dev/null
+topic.publish.enable=true
+topic.publish.retries=3
+topic.consume.enable=true
+topic.consume.polling.interval.seconds=3
+
+event.domain=onap
+event.action.exclude=DELETE
+event.type.rule=POA-EVENT
+event.type.model=NOT-APPLICABLE-IN-POMBA
+event.type.end=END-EVENT
+
+model.cache.expirySeconds=3
+aai.oxm.version=10
--- /dev/null
+# ============LICENSE_START===================================================
+# Copyright (c) 2018 Amdocs
+# ============================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=====================================================
+
+# Note that the start.sh script sets the following System Properties
+# We provide default values here for testing purposes
+APP_HOME=.
+CONFIG_HOME=appconfig
+com.att.eelf.logging.path=src/main/resources
+com.att.eelf.logging.file=logback.xml
+logback.configurationFile=${com.att.eelf.logging.path}/${com.att.eelf.logging.file}
+
+schemaIngestPropLoc=${CONFIG_HOME}/schemaIngest.properties
+
+server.port=9501
+server.ssl.client-auth=want
+server.ssl.key-store=${CONFIG_HOME}/auth/tomcat_keystore
+# Work-around for missing Java certificates file "cacerts". This default value should be overridden.
+server.ssl.trust-store=${CONFIG_HOME}/auth/tomcat_keystore
+
+server.tomcat.max-threads=200
+# The minimum number of threads always kept alive
+server.tomcat.min-spare-threads=25
+
+# Spring Boot logging
+logging.config=${logback.configurationFile}
+
+consumer.topic.names=poa-rule-validation
+publisher.topic.names=poa-audit-result
+
+topics.properties.location=${CONFIG_HOME}/topics/
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-root-config
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/*.*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-config-properties
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/appconfig/*.*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-config-topics
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/appconfig/topics/*.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ {{ if .Values.readiness.enabled }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ {{ end }}
+ env:
+ - name: APP_HOME
+ value: "{{ .Values.config.appDir }}"
+ - name: CONFIG_HOME
+ value: "{{ .Values.config.configDir }}"
+ - name: MAX_HEAP
+ value: "{{ .Values.config.maxHeap }}"
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: {{ .Values.config.appDir }}/application.properties
+ name: root-config-app-prop
+ subPath: application.properties
+ - mountPath: {{ .Values.config.configDir }}/
+ name: properties
+ - mountPath: {{ .Values.config.configAuthDir }}/
+ name: config-auth
+ - mountPath: {{ .Values.config.configTopicsDir }}/
+ name: config-topics
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: root-config-app-prop
+ configMap:
+ name: {{ include "common.fullname" . }}-root-config
+ defaultMode: 0644
+ - name: properties
+ configMap:
+ name: {{ include "common.fullname" . }}-config-properties
+ defaultMode: 0644
+ items:
+ - key: validation-service.properties
+ path: validation-service.properties
+ - key: validation-service-auth.properties
+ path: validation-service-auth.properties
+ - key: rule-indexing.properties
+ path: rule-indexing.properties
+ - key: aai-environment.properties
+ path: aai-environment.properties
+ - key: schemaIngest.properties
+ path: schemaIngest.properties
+ - key: auth_policy.json
+ path: auth_policy.json
+ - name: config-auth
+ secret:
+ secretName: {{ include "common.fullname" . }}-config-auth-secret
+ items:
+ - key: tomcat_keystore
+ path: tomcat_keystore
+ - key: client-cert-onap.p12
+ path: client-cert-onap.p12
+ - name: config-topics
+ configMap:
+ name: {{ include "common.fullname" . }}-config-topics
+ defaultMode: 0644
+ items:
+ - key: topic-poa-audit-result.properties
+ path: topic-poa-audit-result.properties
+ - key: topic-poa-rule-validation.properties
+ path: topic-poa-rule-validation.properties
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+ name: {{ include "common.fullname" . }}-config-auth-secret
+ namespace: {{ include "common.namespace" . }}
+type: Opaque
+data:
+{{ (.Files.Glob "resources/appconfig/auth/*").AsSecrets | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+# readinessRepository: oomk8s
+# readinessImage: readiness-check:2.0.0
+# loggingRepository: docker.elastic.co
+# loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+#repository: nexus3.onap.org:10001
+repository: nexus3.onap.org:10001
+image: onap/validation:1.3-STAGING-latest
+#pullPolicy: Always
+pullPolicy: IfNotPresent
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ appDir: /opt/app/validation-service
+ configDir: /opt/app/validation-service/appconfig
+ configAuthDir: /opt/app/validation-service/appconfig/auth
+ configTopicsDir: /opt/app/validation-service/appconfig/topics
+ maxHeap: 1024
+# username: myusername
+# password: mypassword
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ enabled: false
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: validation-service
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9529
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ .Release.Name }}-pomba-filebeat-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
+
if i.status.container_statuses is None:
continue
for s in i.status.container_statuses:
- if s.name == container_name:
+ if i.metadata.owner_references[0].kind == "StatefulSet":
+ if i.metadata.name == container_name:
+ ready = s.ready
+ if not ready:
+ log.info(container_name + " is not ready.")
+ else:
+ log.info(container_name + " is ready!")
+ else:
+ continue
+ elif s.name == container_name:
ready = s.ready
if not ready:
log.info(container_name + " is not ready.")
+++ /dev/null
-cassandraConfig:
- cassandraHosts: {{ .Values.config.cassandraHosts }}
- reconnectTimeout : {{ .Values.config.cassandraReconnectTimeout }}
- socketReadTimeout: {{ .Values.config.cassandraSocketReadTimeout }}
- socketConnectTimeout: {{ .Values.config.cassandraSocketConnectTimeout }}
- authenticate: true
- username: {{ .Values.config.cassandraUserName }}
- password: {{ .Values.config.cassandraUserPassword }}
- ssl: {{ .Values.config.cassandraSslEnabled }}
- truststorePath : {{ .Values.config.cassandraTruststorePath }}
- truststorePassword : {{ .Values.config.cassandraTruststorePassword }}
-
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Service Design and Creation Workflow Designer backend
+name: sdc-wfd-be
+version: 2.0.0
\ No newline at end of file
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
- /root/job_complete.py
args:
- --job-name
- - {{ include "common.fullname" . }}-init-activity-spec
+ - {{ include "common.fullname" . }}-workflow-init
env:
- name: NAMESPACE
valueFrom:
env:
- name: JAVA_OPTIONS
value: {{ .Values.config.javaOptions }}
- volumeMounts:
- - name: {{ include "common.fullname" . }}-config
- mountPath: /etc/onap/activity-spec/be/config
- volumes:
- - name: {{ include "common.fullname" . }}-config
- configMap:
- name : {{ include "common.fullname" . }}-configmap
- defaultMode: 0755
+ - name: CS_HOSTS
+ value: "{{ .Values.config.cassandraHosts }}"
+ - name: CS_PORT
+ value: "{{ .Values.config.cassandraClientPort }}"
+ - name: CS_USER
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
+ - name: CS_PASSWORD
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
+ - name: SDC_PROTOCOL
+ value: "{{ .Values.config.sdcProtocol }}"
+ - name: SDC_ENDPOINT
+ value: "{{ .Values.config.sdcEndpoint }}"
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
apiVersion: batch/v1
kind: Job
metadata:
- name: {{ include "common.fullname" . }}-init-activity-spec
+ name: {{ include "common.fullname" . }}-workflow-init
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}-job
image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- - /root/ready.py
+ - /root/job_complete.py
args:
- - --container-name
- - sdc-cs
+ - --job-name
+ - {{ .Release.Name }}-sdc-cs-config-cassandra
env:
- name: NAMESPACE
valueFrom:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
env:
- name: CS_HOST
- value: sdc-cs
+ value: "sdc-cs"
+ - name: CS_PORT
+ value: "{{ .Values.config.cassandraThriftClientPort }}"
+ - name: CS_AUTHENTICATE
+ value: "{{ .Values.config.cassandaAuthenticationEnabled }}"
- name: CS_USER
valueFrom:
secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
- restartPolicy: Never
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/activity-spec:1.3.0-SNAPSHOT
-configInitImage: onap/activity-spec-init:1.3.0-SNAPSHOT
+image: onap/workflow-backend:1.3.0-SNAPSHOT
+configInitImage: onap/workflow-init:1.3.0-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
debugEnabled: false
config:
- javaOptions: "-Xmx1536m -Xms1536m"
- cassandraSslEnabled: "false"
- cassandraHosts: ['sdc-cs']
- cassandraUserName: "asdc_user"
- cassandraUserPassword: "Aa1234%^!"
- cassandraReconnectTimeout: 30000
- cassandraSocketReadTimeout: 20000
- cassandraSocketConnectTimeout: 20000
- cassandraTruststorePath: "/path/path"
- cassandraTruststorePassword: "Aa123456"
+ javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6000,server=y,suspend=n -Xmx1536m -Xms1536m"
+ cassandaAuthenticationEnabled: true
+ cassandraHosts: sdc-cs
+ cassandraThriftClientPort: 9160
+ cassandraClientPort: 9042
+ sdcProtocol: HTTP
+ sdcEndpoint: sdc-be:8080
# default number of instances
replicaCount: 1
type: NodePort
internalPort: 8080
externalPort: 8080
- portName: sdc-act
+ portName: sdc-wfd-be
nodePort: "57"
ingress:
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Service Design and Creation Workflow Designer frontend
+name: sdc-wfd-fe
+version: 2.0.0
\ No newline at end of file
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
echo "Visit http://127.0.0.1:8080 to use your application"
kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
{{- end }}
-
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "sdc-wfd-be"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: BACKEND
+ value: {{ .Values.config.backendServerURL }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
annotations:
msb.onap.org/service-info: '[
{
- "serviceName": "workflow-modeler",
+ "serviceName": "wf-gui",
"version": "v1",
- "url": "/api/workflow-modeler/v1",
- "protocol": "REST",
- "port": "{{ .Values.service.internalPort }}",
- "enable_ssl": true,
- "visualRange":"1"
- },
- {
- "serviceName": "workflow-modeler-ui",
- "version": "v1",
- "url": "/workflow-modeler",
+ "url": "/",
"protocol": "UI",
- "path": "/workflow-modeler",
"port": "{{ .Values.service.internalPort }}",
- "visualRange":"1"
+ "visualRange":"0|1"
}
]'
spec:
type: {{ .Values.service.type }}
ports:
+ {{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
global:
nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc/sdc-workflow-designer:1.1.0
+image: onap/workflow-frontend:1.3.0-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
debugEnabled: false
+config:
+ javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6001,server=y,suspend=n -Xmx256m -Xms256m"
+ backendServerURL: "http://sdc-wfd-be:8080"
+
# default number of instances
replicaCount: 1
+nodeSelector: {}
+
+affinity: {}
+
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 60
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
enabled: true
readiness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 60
periodSeconds: 10
service:
type: NodePort
- name: sdc-wfd
- portName: sdc-wfd
- nodePort: "56"
internalPort: 8080
+ externalPort: 8080
+ portName: sdc-wfd-fe
+ nodePort: "56"
ingress:
enabled: false
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
"dcae_dt_source_url": ""
},
"WORKFLOW": {
- "workflow_discovery_url": "{{.Values.config.environment.workflowUrl}}",
- "workflow_source_url": "{{.Values.config.environment.workflowUrl}}"
+ "workflow_discovery_url": "http://sdc-wfd-fe.{{include "common.namespace" .}}:8080",
+ "workflow_source_url": "http://sdc.workflow.plugin.simpledemo.onap.org:30256"
}
},
"VnfRepo": {
org.onap.ccsdk.sli.northbound.uebclient.polling-interval=30
org.onap.ccsdk.sli.northbound.uebclient.polling-timeout=15
org.onap.ccsdk.sli.northbound.uebclient.client-startup-timeout=900
-org.onap.ccsdk.sli.northbound.uebclient.relevant-artifact-types=YANG_XML,VF_LICENSE,TOSCA_CSAR,UCPE_LAYER_2_CONFIGURATION
+org.onap.ccsdk.sli.northbound.uebclient.relevant-artifact-types=TOSCA_CSAR
org.onap.ccsdk.sli.northbound.uebclient.activate-server-tls-auth=false
org.onap.ccsdk.sli.northbound.uebclient.keystore-path=
org.onap.ccsdk.sli.northbound.uebclient.keystore-password=
-org.onap.ccsdk.sli.northbound.uebclient.xslt-path-list=
+org.onap.ccsdk.sli.northbound.uebclient.xslt-path-list=/opt/onap/sdnc/ueb-listener/lib/normalizeTagNames.xslt,/opt/onap/sdnc/ueb-listener/lib/removeNs.xslt
org.onap.ccsdk.sli.northbound.uebclient.artifact-map=/opt/onap/sdnc/data/properties/artifact.map
org.onap.ccsdk.sli.northbound.uebclient.msg-bus-address=message-router.{{.Release.Namespace}},message-router.{{.Release.Namespace}}
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP VFC - DB
+name: vfc-db
+version: 2.0.0
-# Copyright © 2018 ZTE
+# Copyright (C) 2018 Verizon. All Rights Reserved
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
- {{ if eq .Values.liveness.enabled true }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
livenessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: MSB_ADDR
+ value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}2
+
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName }}2
+
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/vfc/db:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: vfc-db
+ portName: vfc-db
+ externalPort: 3306
+ internalPort: 3306
+ externalPort2: 6379
+ internalPort2: 6379
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
+
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
config:
msbServiceName: msb-iag
msbPort: 80
+ dbServiceName: vfc-db
+ dbPort: 3306
# application configuration
config:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
description: Chart for MariaDB Galera cluster
name: mariadb-galera
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
MariaDB-Galera service can be accessed via port 3306 on the following DNS name from within your cluster:
{{ include "common.fullname" . }}.{{ .Release.Namespace }}.svc.cluster.local
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: ConfigMap
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: Secret
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: Service
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: apps/v1beta1
kind: StatefulSet
metadata:
metadata:
labels:
app: {{ include "common.fullname" . }}
+ release: {{ .Release.Name }}
annotations:
pod.alpha.kubernetes.io/initialized: "true"
spec:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
#################################################################
# Global configuration defaults.
#################################################################
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
filebeat.prospectors:
#it is mandatory, in our case it's log
- input_type: log
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: ConfigMap
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: ConfigMap
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: ConfigMap
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: v1
kind: ConfigMap
metadata:
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
apiVersion: batch/v1
kind: Job
metadata:
spec:
template:
metadata:
+ labels:
+ release: {{ .Release.Name }}
name: vid-galera-init
spec:
initContainers:
Code Review / oom.git / commitdiff