Merge "Add DCAE Bootstrap support"

diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml
new file mode 100644 (file)
index 0000000..770f82d
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml
@@ -0,0 +1,21 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP DCAE Health Check
+name: dcae-healtcheck
+version: 2.0.0

diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml
new file mode 100644 (file)
index 0000000..d031e2e
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml
@@ -0,0 +1,22 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+dependencies:
+  - name: common
+    version: ~2.0.0
+    repository: '@local'

diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml
new file mode 100644 (file)
index 0000000..2166ca9
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml
@@ -0,0 +1,65 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+            - name: DCAE_NAMESPACE
+              value: {{ .Values.dcae_ns }}
+            - name: ONAP_NAMESPACE
+              value: {{ include "common.namespace" . }}
+            - name: HELM_RELEASE
+              value: {{ .Release.Name }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"

diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml
new file mode 100644 (file)
index 0000000..0540534
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml
@@ -0,0 +1,45 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      #Example internal target port if required
+      #targetPort: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}

diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
new file mode 100644 (file)
index 0000000..a4d2f29
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
@@ -0,0 +1,54 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiZGNhZUBkY2FlLm9uYXAub3JnIiwiYXV0aCI6IlpHOWphMlZ5T21SdlkydGxjZz09In19
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:1.1.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+ 
+service:
+  name: dcae-healthcheck
+  internalPort: 80
+  externalPort: 80
+  type: ClusterIP
+ 
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.0.0
+
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+dcae_ns: "dcae"
+

diff --git a/kubernetes/dcaegen2/charts/redis/.helmignore b/kubernetes/dcaegen2/charts/dcae-redis/.helmignore
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/.helmignore
rename to kubernetes/dcaegen2/charts/dcae-redis/.helmignore

diff --git a/kubernetes/dcaegen2/charts/redis/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-redis/Chart.yaml
similarity index 97%
rename from kubernetes/dcaegen2/charts/redis/Chart.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/Chart.yaml
index 692b7ab..271458c 100644 (file)
--- a/kubernetes/dcaegen2/charts/redis/Chart.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-redis/Chart.yaml
@@ -14,5 +14,5 @@
 
 apiVersion: v1
 description: ONAP DCAE Redis
-name: redis
+name: dcae-redis
 version: 2.0.0

diff --git a/kubernetes/dcaegen2/charts/redis/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-redis/requirements.yaml
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/requirements.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/requirements.yaml

diff --git a/kubernetes/dcaegen2/charts/redis/resources/redis/scripts/redis-cluster-config.sh b/kubernetes/dcaegen2/charts/dcae-redis/resources/redis/scripts/redis-cluster-config.sh
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/resources/redis/scripts/redis-cluster-config.sh
rename to kubernetes/dcaegen2/charts/dcae-redis/resources/redis/scripts/redis-cluster-config.sh

diff --git a/kubernetes/dcaegen2/charts/redis/templates/NOTES.txt b/kubernetes/dcaegen2/charts/dcae-redis/templates/NOTES.txt
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/templates/NOTES.txt
rename to kubernetes/dcaegen2/charts/dcae-redis/templates/NOTES.txt

diff --git a/kubernetes/dcaegen2/charts/redis/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/configmap.yaml
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/templates/configmap.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/templates/configmap.yaml

diff --git a/kubernetes/dcaegen2/charts/redis/templates/pv.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/pv.yaml
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/templates/pv.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/templates/pv.yaml

diff --git a/kubernetes/dcaegen2/charts/redis/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/service.yaml
similarity index 88%
rename from kubernetes/dcaegen2/charts/redis/templates/service.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/templates/service.yaml
index b3ee24d..636f512 100644 (file)
--- a/kubernetes/dcaegen2/charts/redis/templates/service.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-redis/templates/service.yaml
@@ -15,7 +15,7 @@
 apiVersion: v1
 kind: Service
 metadata:
-  name: {{ include "common.fullname" . }}
+  name: {{ include "common.servicename" . }}
   namespace: {{ include "common.namespace" . }}
   labels:
     app: {{ include "common.name" . }}
@@ -31,17 +31,17 @@ spec:
       #Example internal target port if required
       #targetPort: {{ .Values.service.internalPort }}
       nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.name }}
+      name: {{ .Values.service.portName }}
     - port: {{ .Values.service.externalPort2 }}
       nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.service.name2 }}
+      name: {{ .Values.service.portName2 }}
     {{- else -}}
     - port: {{ .Values.service.externalPort }}
       targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.name }}
+      name: {{ .Values.service.portName }}
     - port: {{ .Values.service.externalPort2 }}
       targetPort: {{ .Values.service.internalPort2 }}
-      name: {{ .Values.service.name2 }}
+      name: {{ .Values.service.portName2 }}
     {{- end}}
   selector:
     app: {{ include "common.name" . }}

diff --git a/kubernetes/dcaegen2/charts/redis/templates/statefulset.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/statefulset.yaml
similarity index 100%
rename from kubernetes/dcaegen2/charts/redis/templates/statefulset.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/templates/statefulset.yaml

diff --git a/kubernetes/dcaegen2/charts/redis/values.yaml b/kubernetes/dcaegen2/charts/dcae-redis/values.yaml
similarity index 98%
rename from kubernetes/dcaegen2/charts/redis/values.yaml
rename to kubernetes/dcaegen2/charts/dcae-redis/values.yaml
index 7b38163..9a5eacd 100644 (file)
--- a/kubernetes/dcaegen2/charts/redis/values.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-redis/values.yaml
@@ -29,7 +29,7 @@ global:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.redis-cluster-container.redis-cluster-container:1.0.0
+image: onap/org.onap.dcaegen2.deployments.redis-cluster-container:1.0.0
 pullPolicy: Always
 
 # application configuration
@@ -61,11 +61,12 @@ service:
   #Services may use any combination of ports depending on the 'type' of
   #service being defined.
   type: NodePort
-  name: client
+  name: dcae-redis
+  portName: client
   externalPort: 6379
   internalPort: 6379
   nodePort: 86
-  name2: gossip
+  portName2: gossip
   externalPort2: 16379
   internalPort2: 16379
   nodePort2: 87

diff --git a/kubernetes/multicloud/templates/service.yaml b/kubernetes/multicloud/templates/service.yaml
index 9f18c5e..2b600ae 100644 (file)
--- a/kubernetes/multicloud/templates/service.yaml
+++ b/kubernetes/multicloud/templates/service.yaml
@@ -31,7 +31,7 @@ metadata:
       "version": "v0",
       "url": "/api/multicloud/v0",
       "protocol": "REST",
-      "port": {{ .Values.service.externalPort }},
+      "port": "{{ .Values.service.externalPort }}",
       "visualRange": "1"
     }
     ]'

diff --git a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py
index 1915efe..571ea9f 100755 (executable)
--- a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py
+++ b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py
@@ -92,5 +92,5 @@ GLOBAL_HEAT_TEMPLATES_FOLDER = "/share/heat"
 # Log info
 GLOBAL_LOG_SERVER_PROTOCOL = "http"
 GLOBAL_LOG_ELASTICSEARCH_PORT = "9200"
-GLOBAL_LOG_LOGSTASH_PORT = "5044"
+GLOBAL_LOG_LOGSTASH_PORT = "9600"
 GLOBAL_LOG_KIBANA_PORT = "5601"

diff --git a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py
index 47d42bc..7aa9581 100755 (executable)
--- a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py
+++ b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py
@@ -15,7 +15,7 @@ GLOBAL_INJECTED_EXTERNAL_DNS = "N/A"
 GLOBAL_INJECTED_GERRIT_BRANCH = "master"
 GLOBAL_INJECTED_LOG_ELASTICSEARCH_IP_ADDR = "log-es.{{include "common.namespace" .}}"
 GLOBAL_INJECTED_LOG_KIBANA_IP_ADDR = "log-kibana.{{include "common.namespace" .}}"
-GLOBAL_INJECTED_LOG_LOGSTASH_IP_ADDR = "log-ls.{{include "common.namespace" .}}"
+GLOBAL_INJECTED_LOG_LOGSTASH_IP_ADDR = "log-ls-http.{{include "common.namespace" .}}"
 GLOBAL_INJECTED_KEYSTONE = "{{ .Values.openStackKeyStoneUrl }}"
 GLOBAL_INJECTED_MR_IP_ADDR = "message-router.{{include "common.namespace" .}}"
 GLOBAL_INJECTED_MSO_IP_ADDR = "so.{{include "common.namespace" .}}"
@@ -100,4 +100,4 @@ GLOBAL_INJECTED_PROPERTIES = {
     "GLOBAL_INJECTED_VID_IP_ADDR" : "{{.Release.Name}}-vid.{{include "common.namespace" .}}",
     "GLOBAL_INJECTED_VM_FLAVOR" : "{{ .Values.openStackFlavourMedium }}",
     "GLOBAL_INJECTED_VNFSDK_IP_ADDR" : "{{.Release.Name}}-vnfsdk.{{include "common.namespace" .}}"
-}
\ No newline at end of file
+}