Merge "commiting resource limit for onap-aaf component"

diff --git a/kubernetes/msb/charts/kube2msb/values.yaml b/kubernetes/msb/charts/kube2msb/values.yaml
index 7532c28..af84593 100644 (file)
--- a/kubernetes/msb/charts/kube2msb/values.yaml
+++ b/kubernetes/msb/charts/kube2msb/values.yaml
@@ -51,21 +51,23 @@ service: {}
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 1Gi
+    requests:
+      cpu: 500m
+      memory: 500Mi
+  large:
+    limits:
+      cpu: 2
+      memory: 2Gi
+    requests:
+      cpu: 1
+      memory: 1Gi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/msb/charts/msb-consul/values.yaml b/kubernetes/msb/charts/msb-consul/values.yaml
index dd66349..79a2640 100644 (file)
--- a/kubernetes/msb/charts/msb-consul/values.yaml
+++ b/kubernetes/msb/charts/msb-consul/values.yaml
@@ -58,21 +58,22 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 20m
+      memory: 100Mi
+    requests:
+      cpu: 10m
+      memory: 50Mi
+  large:
+    limits:
+      cpu: 40m
+      memory: 200Mi
+    requests:
+      cpu: 20m
+      memory: 100Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/msb/charts/msb-discovery/values.yaml b/kubernetes/msb/charts/msb-discovery/values.yaml
index db04320..d36c153 100644 (file)
--- a/kubernetes/msb/charts/msb-discovery/values.yaml
+++ b/kubernetes/msb/charts/msb-discovery/values.yaml
@@ -24,7 +24,7 @@ global:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/msb/msb_discovery:1.2.0-STAGING-latest
+image: onap/msb/msb_discovery:1.2.0-SNAPSHOT-latest
 pullPolicy: Always
 istioSidecar: true
 
@@ -60,21 +60,22 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 400m
+      memory: 400Mi
+    requests:
+      cpu: 200m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 800m
+      memory: 800Mi
+    requests:
+      cpu: 400m
+      memory: 400Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/msb/charts/msb-eag/values.yaml b/kubernetes/msb/charts/msb-eag/values.yaml
index d611170..cf20fdc 100644 (file)
--- a/kubernetes/msb/charts/msb-eag/values.yaml
+++ b/kubernetes/msb/charts/msb-eag/values.yaml
@@ -24,7 +24,7 @@ global:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
 pullPolicy: Always
 istioSidecar: true
 
@@ -64,21 +64,22 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 800Mi
+    requests:
+      cpu: 200m
+      memory: 400Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/msb/charts/msb-iag/values.yaml b/kubernetes/msb/charts/msb-iag/values.yaml
index e747bff..b6417de 100644 (file)
--- a/kubernetes/msb/charts/msb-iag/values.yaml
+++ b/kubernetes/msb/charts/msb-iag/values.yaml
@@ -24,7 +24,7 @@ global:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
 pullPolicy: Always
 istioSidecar: true
 
@@ -64,21 +64,22 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 100m
+      memory: 400Mi
+    requests:
+      cpu: 50m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 200m
+      memory: 800Mi
+    requests:
+      cpu: 100m
+      memory: 400Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-catalog/values.yaml b/kubernetes/vfc/charts/vfc-catalog/values.yaml
index 8ecd40b..8b0561e 100644 (file)
--- a/kubernetes/vfc/charts/vfc-catalog/values.yaml
+++ b/kubernetes/vfc/charts/vfc-catalog/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/catalog:1.1.0
 pullPolicy: Always
@@ -69,21 +71,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-db/values.yaml b/kubernetes/vfc/charts/vfc-db/values.yaml
index 776a281..83071e6 100644 (file)
--- a/kubernetes/vfc/charts/vfc-db/values.yaml
+++ b/kubernetes/vfc/charts/vfc-db/values.yaml
@@ -26,8 +26,10 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
-image: onap/vfc/db:1.1.0-STAGING-latest
+image: onap/vfc/db:latest
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -67,21 +69,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml
index 1bd8601..2263bff 100644 (file)
--- a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/emsdriver:1.1.0
 pullPolicy: Always
@@ -73,21 +75,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml
index a90c3e8..6d2e283 100644 (file)
--- a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/gvnfmdriver:1.1.0
 pullPolicy: Always
@@ -69,21 +71,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml
index 75a667c..9c2c8bb 100644 (file)
--- a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/nfvo/svnfm/huawei:1.1.0
 pullPolicy: Always
@@ -71,21 +73,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 2000Mi
+    requests:
+      cpu: 100m
+      memory: 1000Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 4000Mi
+    requests:
+      cpu: 200m
+      memory: 2000Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml
index aa6d5aa..cbdf9a5 100644 (file)
--- a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/jujudriver:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 2000Mi
+    requests:
+      cpu: 100m
+      memory: 1000Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 4000Mi
+    requests:
+      cpu: 200m
+      memory: 2000Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml
index b58ac19..00fd3b8 100644 (file)
--- a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml
+++ b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/multivimproxy:1.0.0
 pullPolicy: Always
@@ -68,21 +70,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml
index 912e80f..23fd17b 100644 (file)
--- a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/nfvo/svnfm/nokiav2:1.1.0
 pullPolicy: Always
@@ -70,21 +72,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 5000Mi
+    requests:
+      cpu: 100m
+      memory: 3000Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 7000Mi
+    requests:
+      cpu: 200m
+      memory: 5000Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml
index 90daf51..2348953 100644 (file)
--- a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/nfvo/svnfm/nokia:1.1.0
 pullPolicy: Always
@@ -69,21 +71,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 2000Mi
+    requests:
+      cpu: 100m
+      memory: 1000Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 4000Mi
+    requests:
+      cpu: 200m
+      memory: 2000Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-nslcm/values.yaml b/kubernetes/vfc/charts/vfc-nslcm/values.yaml
index c3f6e9d..7a9c8bd 100644 (file)
--- a/kubernetes/vfc/charts/vfc-nslcm/values.yaml
+++ b/kubernetes/vfc/charts/vfc-nslcm/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/nslcm:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-resmgr/values.yaml b/kubernetes/vfc/charts/vfc-resmgr/values.yaml
index 20f4ecd..36b778b 100644 (file)
--- a/kubernetes/vfc/charts/vfc-resmgr/values.yaml
+++ b/kubernetes/vfc/charts/vfc-resmgr/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/resmanagement:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 2000Mi
+    requests:
+      cpu: 100m
+      memory: 1000Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 4000Mi
+    requests:
+      cpu: 200m
+      memory: 2000Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml
index 8992679..13f3e2f 100644 (file)
--- a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml
+++ b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/vnflcm:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml
index f828d52..4625127 100644 (file)
--- a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml
+++ b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/vnfmgr:1.1.0
 pullPolicy: Always
@@ -69,21 +71,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-vnfres/values.yaml b/kubernetes/vfc/charts/vfc-vnfres/values.yaml
index 5e70487..005b8a5 100644 (file)
--- a/kubernetes/vfc/charts/vfc-vnfres/values.yaml
+++ b/kubernetes/vfc/charts/vfc-vnfres/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/vnfres:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml
index fae22c6..2a486da 100644 (file)
--- a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml
+++ b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/wfengine-activiti:1.1.0
 pullPolicy: Always
@@ -69,21 +71,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 2000Mi
+    requests:
+      cpu: 100m
+      memory: 1000Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 4000Mi
+    requests:
+      cpu: 200m
+      memory: 2000Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-workflow/values.yaml b/kubernetes/vfc/charts/vfc-workflow/values.yaml
index 4be7845..050e58f 100644 (file)
--- a/kubernetes/vfc/charts/vfc-workflow/values.yaml
+++ b/kubernetes/vfc/charts/vfc-workflow/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/wfengine-mgrservice:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml
index 3ea6f8d..4c9dbaa 100644 (file)
--- a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/ztesdncdriver:1.1.0
 pullPolicy: Always
@@ -69,21 +71,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 100m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1000Mi
+    requests:
+      cpu: 200m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file

diff --git a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml
index e0e4788..288d86f 100644 (file)
--- a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@ global:
 # Application configuration defaults.
 #################################################################
 # application image
+flavor: small
+
 repository: nexus3.onap.org:10001
 image: onap/vfc/ztevnfmdriver:1.1.0
 pullPolicy: Always
@@ -68,21 +70,21 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 100m
+      memory: 500Mi
+    requests:
+      cpu: 50m
+      memory: 250Mi
+  large:
+    limits:
+      cpu: 200m
+      memory: 1000Mi
+    requests:
+      cpu: 100m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file