--- /dev/null
+#!/bin/bash
+
+###
+# ============LICENSE_START=======================================================
+# Installation Package
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+
+function JAVA_HOME() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ if [[ -z ${JAVA_HOME} ]]; then
+ echo "error: aborting installation: JAVA_HOME variable must be present in base.conf"
+ exit 1;
+ fi
+
+ echo "JAVA_HOME is ${JAVA_HOME}"
+}
+
+function POLICY_HOME() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local POLICY_HOME_ABS
+
+ if [[ -z ${POLICY_HOME} ]]; then
+ echo "error: aborting installation: the installation directory POLICY_HOME must be set"
+ exit 1
+ fi
+
+ POLICY_HOME_ABS=$(readlink -f "${POLICY_HOME}")
+ if [[ -n ${POLICY_HOME_ABS} ]]; then
+ export POLICY_HOME=${POLICY_HOME_ABS}
+ fi
+
+ echo "POLICY_HOME is ${POLICY_HOME}"
+
+ # Do not allow installations from within POLICY_HOME dir or sub-dirs
+ if [[ "$(pwd)/" == ${POLICY_HOME}/* ]]; then
+ echo "error: aborting installation: cannot be executed from '${POLICY_HOME}' or sub-directories. "
+ exit 1
+ fi
+}
+
+function check_java() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local TARGET_JAVA_VERSION INSTALLED_JAVA_VERSION
+
+ TARGET_JAVA_VERSION=$1
+
+ if [[ -z ${JAVA_HOME} ]]; then
+ echo "error: ${JAVA_HOME} is not set"
+ return 1
+ fi
+
+ if ! check_x_file "${JAVA_HOME}/bin/java"; then
+ echo "error: ${JAVA_HOME}/bin/java is not accessible"
+ return 1
+ fi
+
+ INSTALLED_JAVA_VERSION=$("${JAVA_HOME}/bin/java" -version 2>&1 | awk -F '"' '/version/ {print $2}')
+ if [[ -z $INSTALLED_JAVA_VERSION ]]; then
+ echo "error: ${JAVA_HOME}/bin/java is invalid"
+ return 1
+ fi
+
+ if [[ "${INSTALLED_JAVA_VERSION}" != ${TARGET_JAVA_VERSION}* ]]; then
+ echo "error: java version (${INSTALLED_JAVA_VERSION}) does not"\
+ "march desired version ${TARGET_JAVA_VERSION}"
+ return 1
+ fi
+
+ echo "OK: java ${INSTALLED_JAVA_VERSION} installed"
+
+ if ! type -p "${JAVA_HOME}/bin/keytool" > /dev/null 2>&1; then
+ echo "error: {JAVA_HOME}/bin/keytool is not installed"
+ return 1
+ fi
+}
+
+function process_configuration() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local CONF_FILE name value
+
+ CONF_FILE=$1
+ while read line || [ -n "${line}" ]; do
+ if [[ -n ${line} ]] && [[ ${line} != *#* ]]; then
+ name=$(echo "${line%%=*}")
+ value=$(echo "${line#*=}")
+ # escape ampersand so that sed does not replace it with the search string
+ value=${value//&/\\&}
+ if [[ -z ${name} ]] || [[ -z $value ]]; then
+ echo "WARNING: ${line} missing name or value"
+ fi
+ export ${name}="${value}"
+ eval "${name}" "${value}" 2> /dev/null
+ fi
+ done < "${CONF_FILE}"
+ return 0
+}
+
+function component_preinstall() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ /bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \
+ -e 's!${{FQDN}}!'"${FQDN}!g" \
+ *.conf > /dev/null 2>&1
+}
+
+function configure_component() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local CONF_FILE COMPONENT_ROOT_DIR SED_LINE SED_FILES name value
+
+ CONF_FILE=$1
+ COMPONENT_ROOT_DIR=$2
+
+ SED_LINE="sed -i"
+ SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' "
+ SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' "
+ SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' "
+ SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' "
+ SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' "
+
+ while read line || [ -n "${line}" ]; do
+ if [[ -n ${line} ]] && [[ ${line:0:1} != \# ]]; then
+ name=$(echo "${line%%=*}")
+ value=$(echo "${line#*=}")
+ # escape ampersand so that sed does not replace it with the search string
+ value=$(echo "${value}" | sed -e 's/[\/&]/\\&/g')
+ if [[ -z ${name} ]] || [[ -z ${value} ]]; then
+ echo "WARNING: ${line} missing name or value"
+ fi
+ SED_LINE+=" -e 's/\${{${name}}}/${value}/g' "
+ fi
+ done < "$CONF_FILE"
+
+ SED_FILES=""
+ for sed_file in $(find "${COMPONENT_ROOT_DIR}" -type f -exec grep -Iq . {} \; -print 2> /dev/null); do
+ if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then
+ SED_FILES+="${sed_file} "
+ fi
+ done
+
+ if [[ -z ${SED_FILES} ]]; then
+ echo "WARNING: no files to perform variable expansion"
+ else
+ SED_LINE+=${SED_FILES}
+ eval "${SED_LINE}"
+ fi
+}
+
+function configure_settings() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ # The goal is to have repositories for both 'release' and 'snapshot'
+ # artifacts. These may either be remote (e.g. Nexus) repositories, or
+ # a local file-based repository.
+ local fileRepoID=file-repository
+ local fileRepoUrl=file:$HOME_M2/file-repository
+ mkdir -p "${fileRepoUrl#file:}"
+
+ # The following parameters are also used outside of this function.
+ # if snapshotRepositoryUrl and/or releaseRepositoryUrl is defined,
+ # the corresponding ID and url will be updated below
+ releaseRepoID=${fileRepoID}
+ releaseRepoUrl=${fileRepoUrl}
+ snapshotRepoID=${fileRepoID}
+ snapshotRepoUrl=${fileRepoUrl}
+
+ # if both snapshotRepositoryUrl and releaseRepositoryUrl are null,
+ # use standalone-settings.xml that just defines the file-based repo.
+ # if only one of them is specified, use file-based repo for the other.
+ if [[ -z "$snapshotRepositoryUrl" && -z $releaseRepositoryUrl ]]; then
+ echo "snapshotRepositoryUrl and releaseRepositoryUrl properties not set, configuring settings.xml for standalone operation"
+ mv $HOME_M2/standalone-settings.xml $HOME_M2/settings.xml
+ else
+ rm $HOME_M2/standalone-settings.xml
+
+ if [[ -n "${snapshotRepositoryUrl}" ]] ; then
+ snapshotRepoID=${snapshotRepositoryID}
+ snapshotRepoUrl=${snapshotRepositoryUrl}
+ fi
+ if [[ -n "${releaseRepositoryUrl}" ]] ; then
+ releaseRepoID=${releaseRepositoryID}
+ releaseRepoUrl=${releaseRepositoryUrl}
+ fi
+ fi
+
+ SED_LINE="sed -i"
+ SED_LINE+=" -e 's!\${{snapshotRepositoryID}}!${snapshotRepoID}!g' "
+ SED_LINE+=" -e 's!\${{snapshotRepositoryUrl}}!${snapshotRepoUrl}!g' "
+ SED_LINE+=" -e 's!\${{releaseRepositoryID}}!${releaseRepoID}!g' "
+ SED_LINE+=" -e 's!\${{releaseRepositoryUrl}}!${releaseRepoUrl}!g' "
+ SED_LINE+=" -e 's!\${{repositoryUsername}}!${repositoryUsername}!g' "
+ SED_LINE+=" -e 's!\${{repositoryPassword}}!${repositoryPassword}!g' "
+ SED_LINE+=" -e 's!\${{fileRepoID}}!${fileRepoID}!g' "
+ SED_LINE+=" -e 's!\${{fileRepoUrl}}!${fileRepoUrl}!g' "
+
+ SED_LINE+="$HOME_M2/settings.xml"
+ eval "${SED_LINE}"
+
+}
+
+
+function check_r_file() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ FILE=$1
+ if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then
+ return 1
+ fi
+
+ return 0
+}
+
+function check_x_file() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ FILE=$1
+ if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then
+ return 1
+ fi
+
+ return 0
+}
+
+function install_prereqs() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local CONF_FILE HOME_OWNER
+
+ CONF_FILE=$1
+
+ if ! check_r_file "${CONF_FILE}"; then
+ echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible"
+ exit 1
+ fi
+
+ if ! process_configuration "${CONF_FILE}"; then
+ echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}"
+ exit 1
+ fi
+
+ if ! check_java "1.8"; then
+ echo "error: aborting ${COMPONENT_TYPE} installation: invalid java version"
+ exit 1
+ fi
+
+
+ if [[ -z ${POLICY_HOME} ]]; then
+ echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set"
+ exit 1
+ fi
+
+ HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}')
+ if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then
+ echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory"
+ exit 1
+ fi
+
+ echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} "
+ echo "ownership with umask $(umask)."
+}
+
+function configure_base() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local BASH_PROFILE_LINE PROFILE_LINE
+
+ # check if fqdn is set in base.conf and use that value if set
+ if [[ -z ${INSTALL_FQDN} ]]
+ then
+ echo "FQDN not set in config...using the default FQDN ${FQDN}"
+ else
+ echo "Using FQDN ${INSTALL_FQDN} from config"
+ FQDN=${INSTALL_FQDN}
+ fi
+
+ configure_component "${BASE_CONF}" "${POLICY_HOME}"
+
+ configure_settings
+
+ BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
+ PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
+
+ # Note: adding to .bashrc instead of .bash_profile
+ if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bashrc" >/dev/null 2>&1; then
+ echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bashrc"
+ fi
+
+ if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then
+ echo "${PROFILE_LINE}" >> "${HOME}/.profile"
+ fi
+
+ . "${POLICY_HOME}/etc/profile.d/env.sh"
+
+ cat "${POLICY_HOME}"/etc/cron.d/* | crontab
+}
+
+function install_base() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local POLICY_HOME_CONTENTS BASE_TGZ BASEX_TGZ BASH_PROFILE_LINE
+
+ install_prereqs "${BASE_CONF}"
+
+ # following properties must be set:
+ # POLICY_HOME - installation directory, must exist and be writable
+
+ # test that all required properties are set
+ for var in POLICY_HOME JAVA_HOME
+ do
+ if [[ -z $(eval echo \$$var) ]]; then
+ echo "ERROR: $var must be set in $BASE_CONF"
+ exit 1
+ fi
+ done
+
+ if [[ ! ( -d "$POLICY_HOME" && -w "$POLICY_HOME" ) ]]; then
+ echo "ERROR: Installation directory $POLICY_HOME does not exist or not writable"
+ exit 1
+ fi
+
+ if ! /bin/rm -fr "${POLICY_HOME}"/* > /dev/null 2>&1; then
+ echo "error: aborting base installation: cannot delete the underlying ${POLICY_HOME} files"
+ exit 1
+ fi
+
+ POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null)
+ if [[ -n ${POLICY_HOME_CONTENTS} ]]; then
+ echo "error: aborting base installation: ${POLICY_HOME} directory is not empty"
+ exit 1
+ fi
+
+ if ! /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1; then
+ echo "error: aborting base installation: cannot create ${POLICY_HOME}/logs/"
+ exit 1
+ fi
+
+ BASE_TGZ=$(ls base-*.tar.gz)
+ if [ ! -r ${BASE_TGZ} ]; then
+ echo "error: aborting: base package is not accessible"
+ exit 1
+ fi
+
+ tar -tzf ${BASE_TGZ} > /dev/null 2>&1
+ if [[ $? != 0 ]]; then
+ echo >&2 "error: aborting installation: invalid base package file: ${BASE_TGZ}"
+ exit 1
+ fi
+
+ BASEX_TGZ=$(ls basex-*.tar.gz 2> /dev/null)
+ if [ -z ${BASEX_TGZ} ]; then
+ echo "warning: no basex application package present"
+ BASEX_TGZ=
+ else
+ tar -tzf ${BASEX_TGZ} > /dev/null 2>&1
+ if [[ $? != 0 ]]; then
+ echo >&2 "warning: invalid basex application package tar file: ${BASEX_TGZ}"
+ BASEX_TGZ=
+ fi
+ fi
+
+ # Undo any changes in the $HOME directory if any
+
+ BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
+# PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
+
+ # Note: using .bashrc instead of .bash_profile
+ if [[ -f ${HOME}/.bashrc ]]; then
+ /bin/sed -i.bak "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc"
+ fi
+
+# if [[ -f ${HOME}/.profile ]]; then
+# /bin/sed -i.bak "\:${PROFILE_LINE}:d" "${HOME}/.profile"
+# fi
+
+ tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner
+ if [[ $? != 0 ]]; then
+ # this should not happened
+ echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}"
+ exit 1
+ fi
+
+ if [ ! -z ${BASEX_TGZ} ]; then
+ tar -C ${POLICY_HOME} -xf ${BASEX_TGZ} --no-same-owner
+ if [[ $? != 0 ]]; then
+ # this should not happened
+ echo "warning: basex package cannot be unpacked: ${BASEX_TGZ}"
+ fi
+ fi
+
+# /bin/mkdir -p ${POLICY_HOME}/etc/ssl > /dev/null 2>&1
+# /bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1
+# /bin/mkdir -p ${POLICY_HOME}/nagios/tmp > /dev/null 2>&1
+# /bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1
+# /bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1
+
+# chmod -R 755 ${POLICY_HOME}/nagios > /dev/null 2>&1
+
+ if [[ -d $HOME_M2 ]]; then
+ echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP"
+ mv $HOME_M2 $HOME/m2.$TIMESTAMP
+ if [[ $? != 0 ]]; then
+ echo "WARNING: Failed to rename $HOME_M2 directory; will use old directory"
+ fi
+ fi
+ if [[ ! -d $HOME_M2 ]]; then
+ echo "Moving m2 directory to $HOME_M2"
+ mv $POLICY_HOME/m2 $HOME_M2
+ if [[ $? != 0 ]]; then
+ echo "ERROR: Error in moving m2 directory"
+ exit 1
+ fi
+ fi
+
+ configure_base
+
+ # save ${BASE_CONF} in PDP-D installation
+ cp "${BASE_CONF}" "${POLICY_HOME}"/etc/profile.d
+
+# if ! create_keystore; then
+# echo "error: aborting base installation: creating keystore"
+# exit 1
+# fi
+
+# list_unexpanded_files ${POLICY_HOME}
+
+}
+
+function install_controller()
+{
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ if [[ -f "${HOME}/.bashrc" ]]; then
+ source "${HOME}/.bashrc"
+ fi
+
+ if [[ -z ${POLICY_HOME} ]]; then
+ echo "error: aborting installation: POLICY_HOME environment variable is not set."
+ exit 1
+ fi
+
+ if ! check_r_file ${POLICY_HOME}/etc/profile.d/env.sh; then
+ echo "error: aborting installation: ${POLICY_HOME}/etc/profile.d/env.sh is not accessible"
+ exit 1
+ fi
+
+ local CONTROLLER_CONF CONTROLLER_ZIP RULES_JAR SOURCE_DIR CONTROLLER_DIR AAAA BBBB PORT UTOPIC ARTIFACT_VERSION
+
+ CONTROLLER_CONF=$COMPONENT_TYPE.conf
+ install_prereqs "${CONTROLLER_CONF}"
+
+ # following properties must be set in conf file:
+ # CONTROLLER_ARTIFACT_ID - Maven artifactId for controller
+ # CONTROLLER_NAME - directory name for the controller; controller will be installed to
+ # $POLICY_HOME/controllers/$CONTROLLER_NAME
+ # CONTROLLER_PORT - port number for the controller REST interface
+ # RULES_ARTIFACT - rules artifact specifier: groupId:artifactId:version
+
+ # test that all required properties are set
+ for var in CONTROLLER_ARTIFACT_ID CONTROLLER_NAME CONTROLLER_PORT RULES_ARTIFACT UEB_TOPIC
+ do
+ if [[ -z $(eval echo \$$var) ]]; then
+ echo "ERROR: $var must be set in $CONTROLLER_CONF"
+ exit 1
+ fi
+ done
+
+ CONTROLLER_ZIP=$(ls $CONTROLLER_ARTIFACT_ID*.zip 2>&-)
+ if [[ -z $CONTROLLER_ZIP ]]; then
+ echo "ERROR: Cannot find controller zip file ($CONTROLLER_ARTIFACT_ID*.zip)"
+ exit 1
+ fi
+
+ if [[ ! "$CONTROLLER_NAME" =~ ^[A-Za-z0-9_-]+$ ]]; then
+ echo "ERROR: CONTROLLER_NAME may only contain alphanumeric, underscore, and dash characters"
+ exit 1
+ fi
+
+ if [[ ! "$CONTROLLER_PORT" =~ ^[0-9]+$ ]]; then
+ echo "ERROR: CONTROLLER_PORT is not a valid integer"
+ exit 1
+ fi
+
+ # split artifact string into parts
+ IFS=: read RULES_GROUPID RULES_ARTIFACTID RULES_VERSION <<<$RULES_ARTIFACT
+ if [[ -z $RULES_GROUPID || -z $RULES_ARTIFACTID || -z $RULES_VERSION ]]; then
+ echo "ERROR: Invalid setting for RULES_ARTIFACT property"
+ exit 1
+ fi
+
+ #RULES_JAR=$RULES_ARTIFACTID-$RULES_VERSION.jar
+ RULES_JAR=$(echo ${RULES_ARTIFACTID}-*.jar)
+ if ! check_r_file $RULES_JAR; then
+ echo "WARNING: Rules jar file $RULES_JAR not found in installer package, must be installed manually"
+ RULES_JAR=
+ fi
+
+
+ SOURCE_DIR=$PWD
+ CONTROLLER_DIR=$POLICY_HOME
+
+ cd $CONTROLLER_DIR
+
+ echo "Unpacking controller zip file"
+ # use jar command in case unzip not present on system
+ jar xf $SOURCE_DIR/$CONTROLLER_ZIP
+ if [[ $? != 0 ]]; then
+ echo "ERROR: unpack of controller zip file failed, install aborted"
+ exit 1
+ fi
+
+ chmod +x bin/*
+
+ # Perform base variable replacement in controller config file
+ configure_component "${SOURCE_DIR}/${BASE_CONF}" "${CONTROLLER_DIR}"
+
+ # Perform variable replacements in config files.
+ # config files may contain the following strings that need to be replaced with
+ # real values:
+ # AAAA - artifactId
+ # BBBB - Substring of AAAA after first dash (stripping initial "ncomp-" or "policy-")
+ # PORT - Port number for REST server
+
+ echo "Performing variable replacement in config files"
+ AAAA=$CONTROLLER_ARTIFACT_ID
+ BBBB=${AAAA#[a-z]*-}
+ PORT=$CONTROLLER_PORT
+ UTOPIC=${UEB_TOPIC}
+
+ for file in config/*
+ do
+ sed -i -e "s/AAAA/$AAAA/" -e "s/BBBB/$BBBB/" -e "s/PORT/$PORT/" -e "s!\${{UEB_TOPIC}}!${UTOPIC}!" $file
+ if [[ $? != 0 ]]; then
+ echo "ERROR: variable replacement failed for file $file, install aborted"
+ exit 1
+ fi
+ done
+
+ # append properties for rules artifact to server properties
+ cat >>config/server.properties <<EOF
+
+rules.groupId=$RULES_GROUPID
+rules.artifactId=$RULES_ARTIFACTID
+rules.version=$RULES_VERSION
+EOF
+
+ # TODO: run pw.sh script to set passwords
+
+ # return to directory where we started
+ cd $SOURCE_DIR
+
+ # install rules jar into repository if present
+ if [[ -n $RULES_JAR ]]; then
+ # can't use RULES_VERSION because may be set to "LATEST",
+ # so extract version from the jar filename
+ ARTIFACT_VERSION=$(sed -e "s/${RULES_ARTIFACTID}-//" -e "s/\.jar//" <<<${RULES_JAR})
+ if [[ -n $repositoryUrl ]]; then
+ echo "Deploying rules artifact to Policy Repository"
+ mvn deploy:deploy-file -Dfile=$RULES_JAR \
+ -DgroupId=$RULES_GROUPID -DartifactId=$RULES_ARTIFACTID -Dversion=$ARTIFACT_VERSION \
+ -DrepositoryId=${repositoryID} -Durl=${repositoryUrl} \
+ -DgeneratePom=true -DupdateReleaseInfo=true
+ else
+ echo "Installing rules artifact into local .m2 repository"
+ mvn --offline org.apache.maven.plugins:maven-install-plugin:2.5.2:install-file \
+ -Dfile=$RULES_JAR -DgeneratePom=true -DupdateReleaseInfo=true
+ fi
+ fi
+
+ update_monitor $CONTROLLER_NAME
+
+ # save install configuration as an environment file
+ ln -s -f "${POLICY_HOME}/etc/profile.d/${BASE_CONF}" "${POLICY_HOME}/config/${BASE_CONF}.environment"
+}
+
+
+function update_monitor() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local NAME lastline
+
+ NAME=$1
+
+ if [[ -f ${POLICY_HOME}/etc/monitor/monitor.cfg ]]; then
+ if grep -q "^${NAME}=" ${POLICY_HOME}/etc/monitor/monitor.cfg; then
+ echo "OK: updating monitoring entry for ${NAME}"
+ /bin/sed -i.bak \
+ -e "s/^${NAME}=.*/${NAME}=off/g" \
+ ${POLICY_HOME}/etc/monitor/monitor.cfg
+ else
+ # make sure file ends with newline
+ lastline=$(tail -n 1 ${POLICY_HOME}/etc/monitor/monitor.cfg; echo x)
+ lastline=${lastline%x}
+ if [ "${lastline: -1}" = $'\n' ]; then
+ echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg"
+ else
+ echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg (with newline)"
+ echo "" >> ${POLICY_HOME}/etc/monitor/monitor.cfg
+ fi
+
+
+ echo "${NAME}=off" >> ${POLICY_HOME}/etc/monitor/monitor.cfg
+ fi
+ else
+ echo "WARNING: ${POLICY_HOME}/etc/monitor/monitor.cfg does not exist. No monitoring enabled."
+ fi
+}
+
+# Usage: getPomAttributes <pom-file> <attribute> ...
+#
+# This function performs simplistic parsing of a 'pom.xml' file, extracting
+# the specified attributes (e.g. 'groupId', 'artifactId', 'version'). The
+# attributes are returned as environment variables with the associated name.
+
+function getPomAttributes
+{
+ local tab=$'\t'
+ local rval=0
+ local file="$1"
+ local attr
+ local value
+ shift
+ for attr in "$@" ; do
+ # Try to fetch the parameter associated with the 'pom.xml' file.
+ # Initially, the 'parent' element is excluded. If the desired
+ # parameter is not found, the 'parent' element is included in the
+ # second attempt.
+ value=$(sed -n \
+ -e '/<parent>/,/<\/parent>/d' \
+ -e '/<dependencies>/,/<\/dependencies>/d' \
+ -e '/<build>/,/<\/build>/d' \
+ -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \
+ <"${file}")
+
+ if [[ "${value}" == "" ]] ; then
+ # need to check parent for parameter
+ value=$(sed -n \
+ -e '/<dependencies>/,/<\/dependencies>/d' \
+ -e '/<build>/,/<\/build>/d' \
+ -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \
+ <"${file}")
+ if [[ "${value}" == "" ]] ; then
+ echo "${file}: Can't determine ${attr}" >&2
+ rval=1
+ fi
+ fi
+ # the following sets an environment variable with the name referred
+ # to by ${attr}
+ read ${attr} <<<"${value}"
+ done
+ return ${rval}
+}
+
+
+# Usage: installPom <pom-file>
+#
+# This function installs a 'pom.xml' file in the local repository
+
+function installPom
+{
+ # need to extract attributes from POM file
+ if getPomAttributes "${1}" artifactId groupId version ; then
+ local repoID repoUrl
+ if [[ "${version}" =~ SNAPSHOT ]] ; then
+ repoID=${snapshotRepoID}
+ repoUrl=${snapshotRepoUrl}
+ else
+ repoID=${releaseRepoID}
+ repoUrl=${releaseRepoUrl}
+ fi
+ echo "${1}: Deploying POM artifact to remote repository"
+ mvn deploy:deploy-file -Dfile="$1" \
+ -Dpackaging=pom -DgeneratePom=false \
+ -DgroupId=${groupId} \
+ -DartifactId=${artifactId} \
+ -Dversion=${version} \
+ -DrepositoryId=${repoID} -Durl=${repoUrl} \
+ -DupdateReleaseInfo=true
+ else
+ echo "${1}: Can't install pom due to missing attributes" >&2
+ return 1
+ fi
+}
+
+# Usage: installJar <jar-file>
+#
+# This function installs a JAR file in the local repository, as well as
+# the 'pom.xml' member it contains.
+
+function installJar
+{
+ local dir=$(mktemp -d)
+ local jar="${1##*/}"
+ cp -p "${1}" "${dir}/${jar}"
+
+ (
+ local rval=0
+ cd "${dir}"
+ # determine name of 'pom' file within JAR
+ local pom=$(jar tf ${jar} META-INF | grep '/pom\.xml$' | head -1)
+ if [[ "${pom}" ]] ; then
+ # extract pom file
+ jar xf ${jar} "${pom}"
+
+ # determine version from pom file
+ if getPomAttributes "${pom}" version ; then
+ local repoID repoUrl
+ if [[ "${version}" =~ SNAPSHOT ]] ; then
+ repoID=${snapshotRepoID}
+ repoUrl=${snapshotRepoUrl}
+ else
+ repoID=${releaseRepoID}
+ repoUrl=${releaseRepoUrl}
+ fi
+ echo "${1}: Deploying JAR artifact to remote repository"
+ mvn deploy:deploy-file \
+ -Dfile=${jar} \
+ -Dversion=${version} \
+ -Dpackaging=jar -DgeneratePom=false -DpomFile=${pom} \
+ -DrepositoryId=${repoID} -Durl=${repoUrl} \
+ -DupdateReleaseInfo=true
+ else
+ echo "${1}: Can't determine version from 'pom.xml'" >&2
+ rval=1
+ fi
+ else
+ echo "${1}: Can't find 'pom.xml'" >&2
+ rval=1
+ fi
+ rm -rf ${dir}
+ return ${rval}
+ )
+}
+
+# Unzip the 'artifacts-*.zip' file, and install all of the associated
+# artifacts into the local repository.
+
+function installArtifacts
+{
+ local file
+ if [[ -f $(echo artifacts-*.zip) ]] ; then
+ # use jar command in case unzip not present on system
+ jar xf artifacts-*.zip
+ for file in artifacts/* ; do
+ case "${file}" in
+ *pom.xml|*.pom) installPom "${file}";;
+ *.jar) installJar "${file}";;
+ *) echo "${file}: Don't know how to install artifact" >&2;;
+ esac
+ done
+ fi
+}
+
+function installFeatures
+{
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ local name featureConf
+ export FEATURES_HOME="${POLICY_HOME}/${FEATURES_DIR}"
+ echo "FEATURES_HOME is ${FEATURES_HOME}"
+
+ mkdir -p "${FEATURES_HOME}" > /dev/null 2>&1
+ if [[ -d "${FEATURES_HOME}" && -x "${FEATURES_HOME}" ]]; then
+ SOURCE_DIR=$PWD
+ for feature in feature-*.zip ; do
+ name="${feature#feature-}"
+ name="${name%-[0-9]*\.zip}"
+ mkdir -p "${FEATURES_HOME}/${name}" > /dev/null 2>&1
+ (cd "${FEATURES_HOME}/${name}"; jar xf ${SOURCE_DIR}/${feature})
+ featureConf="feature-${name}.conf"
+ if [[ -r "${featureConf}" ]]; then
+ configure_component "${featureConf}" "${FEATURES_HOME}"
+ cp "${featureConf}" "${POLICY_HOME}"/etc/profile.d
+ echo "feature ${name} has been installed (configuration present)"
+ else
+ echo "feature ${name} has been installed (no configuration present)"
+ fi
+ done
+
+ echo "applying base configuration to features"
+ configure_component "${BASE_CONF}" "${FEATURES_HOME}"
+ else
+ echo "error: aborting ${FEATURES_HOME} is not accessible"
+ exit 1
+ fi
+}
+
+function do_install()
+{
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ echo "Starting installation at $(date)"
+ echo
+
+ COMPONENT_TYPE=base
+ BASE_CONF=base.conf
+ install_base
+ component_preinstall
+
+ COMPONENT_TYPE=policy-management
+ install_controller
+
+ installFeatures
+ installArtifacts
+
+
+ if [[ -f apps-installer ]]; then
+ # if exists, any customizations to the
+ # base drools installation from the drools apps
+ # is executed here
+
+ ./apps-installer
+ fi
+
+ echo
+ echo "Installation complete"
+ echo "Please logoff and login again to update shell environment"
+
+}
+
+export POLICY_USER=$(/usr/bin/id -un)
+export POLICY_GROUP=$POLICY_USER
+
+FQDN=$(hostname -f 2> /dev/null)
+if [[ $? != 0 || -z ${FQDN} ]]; then
+ echo "error: cannot determine the FQDN for this host $(hostname)."
+ exit 1
+fi
+
+TIMESTAMP=$(date "+%Y%m%d-%H%M%S")
+LOGFILE=$PWD/install.log.$TIMESTAMP
+
+OPERATION=install
+BASE_CONF=base.conf
+HOME_M2=$HOME/.m2
+FEATURES_DIR="features"
+
+do_install 2>&1 | tee $LOGFILE
Code Review / policy / drools-pdp.git / commitdiff