Release Kubernetes Helm kubectl Docker
============== ========== ===== ======= ========
amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
- beijing/master 1.8.5 2.7.x 1.8.5 1.12.x
+ beijing/master 1.8.10 2.7.x 1.8.10 17.03.x
============== ========== ===== ======= ========
Minimum Hardware Configuration
apiVersion: v1
description: ONAP Secret Management Service
-name: sms
+name: aaf-sms
version: 2.0.0
--- /dev/null
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Secret Management Service Quorum Client
+name: aaf-sms-quorumclient
+version: 2.0.0
--- /dev/null
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+ config.json: |
+ {{ .Values.config | toJson }}
--- /dev/null
+{{/*
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
--- /dev/null
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ serviceName:
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ name: {{ include "common.name" . }}
+ imagePullPolicy: {{ .Values.pullPolicy }}
+ command: ["/quorumclient/bin/quorumclient"]
+ workingDir: /quorumclient/
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /quorumclient/config.json
+ name: {{ include "common.name" .}}
+ subPath: config.json
+ - mountPath: /quorumclient/auth
+ name: {{ include "common.fullname" . }}-auth
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name : {{ include "common.name" . }}
+ configMap:
+ name: {{ include "common.fullname" . }}
+ - name: {{ include "common.fullname" . }}-auth
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.1
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/smsquorumclient
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ url: "http://aaf-sms:10443"
+ cafile: "selfsignedca.pem"
+ clientcert: "server.cert"
+ clientkey: "server.key"
+ timeout: "60s"
+ disable_tls: true
+
+# default number of instances
+replicaCount: 3
+
+nodeSelector: {}
+
+affinity: {}
+
+persistence:
+ enabled: true
+ volumeReclaimPolicy: Retain
+ accessMode: ReadWriteOnce
+ size: 10Mi
+ mountPath: /dockerdata-nfs
+ mountSubPath: sms/quorum/data
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
apiVersion: v1
description: Chart to launch Vault as SMS backend
-name: vault
+name: aaf-sms-vault
appVersion: 0.9.5
version: 2.0.0
--- /dev/null
+{{/*
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
--- /dev/null
+{{/*
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+ storageClassName: ""
+{{- else }}
+ storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
repository: docker.io
image:
consul: consul:1.0.6
- vault: vault:0.9.6
+ vault: vault:0.10.0
pullPolicy: Always
# flag to enable debugging - application support required
persistence:
enabled: true
-
volumeReclaimPolicy: Retain
-
- accessMode: ReadWriteMany
+ accessMode: ReadWriteOnce
size: 2Gi
mountPath: /dockerdata-nfs
mountSubPath: sms/consul/data
release: {{ .Release.Name }}
spec:
containers:
- - image: "{{ .Values.repository }}/{{ .Values.image }}"
+ - image: "{{ include "common.repository" . }}/{{ .Values.image }}"
name: {{ include "common.name" . }}
imagePullPolicy: {{ .Values.pullPolicy }}
command: ["/sms/bin/sms"]
- mountPath: /sms/smsconfig.json
name: {{ include "common.name" .}}
subPath: smsconfig.json
+ - mountPath: /sms/auth
+ name: {{ include "common.fullname" . }}-auth
resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
- name : {{ include "common.name" . }}
configMap:
name: {{ include "common.fullname" . }}
+ - name: {{ include "common.fullname" . }}-auth
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+{{/*
+# Copyright 2018 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+ storageClassName: ""
+{{- else }}
+ storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
+ persistence: {}
#################################################################
# Application configuration defaults.
internalPort: 10443
nodePort: 43
+persistence:
+ enabled: true
+ volumeReclaimPolicy: Retain
+ accessMode: ReadWriteOnce
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: sms/auth
+
ingress:
enabled: false
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+{{ $pvNum := default 1 .Values.replicaCount | int }}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data0
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}0
+{{ if gt $pvNum 1 }}
+---
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data1
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}1
+{{ end }}
+{{ if gt $pvNum 2 }}
+---
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data2
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}2
+{{ end }}
+{{ if gt $pvNum 3 }}
+---
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data3
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}3
+{{ end }}
+{{ if gt $pvNum 4 }}
+---
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data4
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}4
+{{ end }}
+{{- end -}}
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
initContainers:
- command:
- /root/ready.py
- mountPath: /opt/onap/ccsdk/bin/installSdncDb.sh
name: onap-sdnc-bin
subPath: installSdncDb.sh
+ - mountPath: {{ .Values.persistence.mdsalPath }}
+ name: {{ include "common.fullname" . }}-data
- mountPath: /var/log/onap
name: logs
- mountPath: /opt/opendaylight/current/etc/org.ops4j.pax.logging.cfg
configMap:
name: {{ include "common.fullname" . }}-onap-sdnc-bin
defaultMode: 0755
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+{{ if not .Values.persistence.enabled }}
+ - name: {{ include "common.fullname" . }}-data
+ emptyDir: {}
+{{ else }}
+ volumeClaimTemplates:
+ - metadata:
+ name: {{ include "common.fullname" . }}-data
+ labels:
+ name: {{ include "common.fullname" . }}
+ spec:
+ accessModes: [ {{ .Values.persistence.accessMode }} ]
+ storageClassName: {{ include "common.fullname" . }}-data
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{ end }}
nodePort2: 31
clusterPort: 2550
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ accessMode: ReadWriteOnce
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: appc/mdsal
+ mdsalPath: /opt/opendaylight/current/daexim
+
ingress:
enabled: false
dataRootDir: /dockerdata-nfs
springApplicationJson: >
{
- "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://mariadb:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3",
+ "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://clampdb:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3",
"clamp.config.sdc.catalog.url": "https://sdc-be:8443/sdc/v1/catalog/",
"clamp.config.sdc.hostUrl": "https://sdc-be:8443/",
"clamp.config.sdc.serviceUrl": "https://sdc-be:8443/sdc/v1/catalog/services",
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
internalPort: 9006
nodePort: 93
+ingress:
+ enabled: false
+
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
internalPort: 9004
nodePort: 92
+ingress:
+ enabled: false
+
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
failureThreshold: 5
enabled: true
+ingress:
+ enabled: false
+
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
--- /dev/null
+{
+ "openstack": {
+ "vim_type": "openstack",
+ "versions": {
+ "titanium_cloud": {
+ "version": "titanium_cloud",
+ "extra_info_hint": "",
+ "provider_plugin": "multicloud-titanium_cloud"
+ },
+ "ocata": {
+ "version": "ocata",
+ "extra_info_hint": "",
+ "provider_plugin": "multicloud-ocata"
+ }
+ },
+ "provider_plugin": "multicloud-ocata"
+ },
+ "vmware": {
+ "vim_type": "vmware",
+ "versions": {
+ "4.0": {
+ "version": "4.0",
+ "extra_info_hint": "",
+ "provider_plugin": "multicloud-vio"
+ }
+ },
+ "provider_plugin": "multicloud-vio"
+ }
+}
\ No newline at end of file
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/log/framework/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-provider-plugin-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/provider-plugin.json").AsConfig . | indent 2 }}
- mountPath: /opt/multivimbroker/multivimbroker/pub/config/log.yml
name: framework-logconfig
subPath: log.yml
+ - mountPath: /opt/multivimbroker/multivimbroker/pub/config/provider-plugin.json
+ name: provider-plugin
+ subPath: provider-plugin.json
ports:
- containerPort: {{ .Values.service.internalPort }}
# disable liveness probe when breakpoints set in debugger
volumes:
- name: framework-log
emptyDir: {}
+ - name: provider-plugin
+ configMap:
+ name: {{ include "common.fullname" . }}-provider-plugin-configmap
- name: framework-data-filebeat
emptyDir: {}
- name: filebeat-conf
# validator settings
#default_error_message = Default error message
-login_url_no_ret_val = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+login_url_no_ret_val = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/login.htm
user_attribute_name = user
-authentication_server_url = http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/
-ecomp_openid_connect_client = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/openid_connect_login
-ecomp_redirect_uri = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/welcome.htm
+authentication_server_url = http://{{.Values.global.portalHostName}}:8383/openid-connect-server-webapp/
+ecomp_openid_connect_client = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/openid_connect_login
+ecomp_redirect_uri = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/welcome.htm
user.attribute.name = user_attribute
# for single sign on
-ecomp_redirect_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+ecomp_redirect_url = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/login.htm
# URL of the ECOMP Portal REST API
-ecomp_rest_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/auxapi
+ecomp_rest_url = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/auxapi
ueb_listeners_enable = true
sessiontimeout_feed_cron = 0 0/5 * * * ? *
#Front end URL
-frontend_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/applicationsHome
+frontend_url = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/applicationsHome
# An Unqiue 128-bit value defined to indentify a specific version of
online_user_update_duration = 300
#authenticate user server
-authenticate_user_server=http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/allUsers
+authenticate_user_server=http://{{.Values.global.portalHostName}}:8383/openid-connect-server-webapp/allUsers
#window width threshold to collapse left/right menu when page onload
window_width_threshold_left_menu = 1400
"version": "v2",
"url": "/",
"protocol": "REST"
- "port": "8989",
+ "port": "{{ .Values.service.externalPort }}",
"visualRange":"1"
}
]'
spec:
type: {{ .Values.service.type }}
ports:
- {{if eq .Values.service.type "NodePort" -}}
+ {{- if or (eq .Values.service.type "NodePort") (eq .Values.service.type "LoadBalancer") }}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- port: {{ .Values.service.externalPort3 }}
targetPort: {{ .Values.service.internalPort3 }}
name: {{ .Values.service.portName }}3
- {{- end}}
+ {{- end }}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
image: onap/portal-app:2.1-STAGING-latest
pullPolicy: Always
-# flag to enable debugging - application support required
-debugEnabled: false
-
# default number of instances
replicaCount: 1
periodSeconds: 10
service:
- type: NodePort
+ type: LoadBalancer
name: portal-app
portName: portal-app
externalPort: 8989
while the OOM K8s version has these service split up.
*/
-- app_url is the FE, app_rest_endpoint is the BE
---portal-sdk => doesnt have a node port so this won't work
-update fn_app set app_url = 'http://portal-sdk.simpledemo.onap.org:8990/ONAPPORTALSDK/welcome.htm', app_rest_endpoint = 'http://portal-sdk:8990/ONAPPORTALSDK/api/v2' where app_name = 'xDemo App';
---dmaap-bc => the dmaap-bc chart actually opens 8080 and 8443, not 8989. the chart isnt merged yet either. confirm the service name after bc chart merge
-update fn_app set app_url = 'http://dmaap-bc.simpledemo.onap.org:8989/ECOMPDBCAPP/dbc#/dmaap', app_rest_endpoint = 'http://dmaap-bc:8989/ECOMPDBCAPP/api/v2' where app_name = 'DMaaP Bus Ctrl';
+--portal-sdk => TODO: doesn't open a node port yet
+update fn_app set app_url = 'http://{{.Values.config.portalSdkHostName}}:{{.Values.config.portalSdkPort}}/ONAPPORTALSDK/welcome.htm', app_rest_endpoint = 'http://portal-sdk:8990/ONAPPORTALSDK/api/v2' where app_name = 'xDemo App';
+--dmaap-bc => the dmaap-bc doesn't open a node port..
+update fn_app set app_url = 'http://{{.Values.config.dmaapBcHostName}}:{{.Values.config.dmaapBcPort}}/ECOMPDBCAPP/dbc#/dmaap', app_rest_endpoint = 'http://dmaap-bc:8989/ECOMPDBCAPP/api/v2' where app_name = 'DMaaP Bus Ctrl';
--sdc-be => 8443:30204, 8080:30205
--sdc-fe => 8181:30206, 9443:30207
-update fn_app set app_url = 'http://sdc.api.fe.simpledemo.onap.org:8181/sdc1/portal', app_rest_endpoint = 'http://sdc-be:8080/api/v2' where app_name = 'SDC';
+update fn_app set app_url = 'http://{{.Values.config.sdcFeHostName}}:{{.Values.config.sdcFePort}}/sdc1/portal', app_rest_endpoint = 'http://sdc-be:8080/api/v2' where app_name = 'SDC';
--pap => 8443:30219
-update fn_app set app_url = 'http://policy.api.simpledemo.onap.org:8443/onap/policy', app_rest_endpoint = 'http://pap:8443/onap/api/v2' where app_name = 'Policy';
+update fn_app set app_url = 'http://{{.Values.config.papHostName}}:{{.Values.config.papPort}}/onap/policy', app_rest_endpoint = 'http://pap:8443/onap/api/v2' where app_name = 'Policy';
--vid => 8080:30200
-update fn_app set app_url = 'http://vid.api.simpledemo.onap.org:8080/vid/welcome.htm', app_rest_endpoint = 'http://vid:8080/vid/api/v2' where app_name = 'Virtual Infrastructure Deployment';
---sparky => sparky doesn't open a node port..
-update fn_app set app_url = 'http://aai.api.sparky.simpledemo.onap.org:8080/services/aai/webapp/index.html#/viewInspect', app_rest_endpoint = 'http://aai-sparky-be.{{.Release.Namespace}}:9517/api/v2' where app_name = 'A&AI UI';
+update fn_app set app_url = 'http://{{.Values.config.vidHostName}}:{{.Values.config.vidPort}}/vid/welcome.htm', app_rest_endpoint = 'http://vid:8080/vid/api/v2' where app_name = 'Virtual Infrastructure Deployment';
+--sparky => TODO: sparky doesn't open a node port yet
+update fn_app set app_url = 'http://{{.Values.config.aaiSparkyHostName}}:{{.Values.config.aaiSparkyPort}}/services/aai/webapp/index.html#/viewInspect', app_rest_endpoint = 'http://aai-sparky-be.{{.Release.Namespace}}:9517/api/v2' where app_name = 'A&AI UI';
--cli => 8080:30260
-update fn_app set app_url = 'http://cli.api.simpledemo.onap.org:8080/', app_type = 1 where app_name = 'CLI';
+update fn_app set app_url = 'http://{{.Values.config.cliHostName}}:{{.Values.config.cliPort}}/', app_type = 1 where app_name = 'CLI';
--msb-discovery => 10081:30281 this is clearly incorrect
-update fn_app set app_url = 'http://msb.api.discovery.simpledemo.onap.org:8080/iui/microservices/default.html' where app_name = 'MSB';
\ No newline at end of file
+update fn_app set app_url = 'http://{{.Values.config.msbDiscoveryHostName}}:{{.Values.config.msbDiscoveryPort}}/iui/microservices/default.html' where app_name = 'MSB';
\ No newline at end of file
mariadbRootPassword: Aa123456
#The directory where sql files are found in the projects gerrit repo.
sqlSourceDirectory: portal/deliveries
-
+ # sdc frontend assignment for port 8181
+ sdcFePort: "30206"
+ # application's front end hostname. Must be resolvable on the client side environment
+ sdcFeHostName: "sdc.api.fe.simpledemo.onap.org"
+ # policy pap ui assignment for port 8443
+ papPort: "30219"
+ # application's front end hostname. Must be resolvable on the client side environment
+ papHostName: "policy.api.simpledemo.onap.org"
+ # vid ui assignment for port 8080
+ vidPort: "30200"
+ # application's front end hostname. Must be resolvable on the client side environment
+ vidHostName: "vid.api.simpledemo.onap.org"
+ # aai sparky ui assignment for port 8080
+ aaiSparkyPort: "" # TODO: populate with
+ # application's front end hostname. Must be resolvable on the client side environment
+ aaiSparkyHostName: "aai.api.sparky.simpledemo.onap.org"
+ # cli ui assignment for port 8080
+ cliPort: "30260"
+ # application's front end hostname. Must be resolvable on the client side environment
+ cliHostName: "cli.api.simpledemo.onap.org"
+ # portal sdk (demo app) ui assignment for port 8990
+ portalSdkPort: "" # TODO: populate with port
+ # application's front end hostname. Must be resolvable on the client side environment
+ portalSdkHostName: "portal-sdk.simpledemo.onap.org"
+ # dmaap bus controller ui assignment for port ?
+ dmaapBcPort: "" # TODO: populate with
+ # application's front end hostname. Must be resolvable on the client side environment
+ dmaapBcHostName: "dmaap-bc.simpledemo.onap.org"
+ # msb discovery ui assignment for port ?
+ msbDiscoveryPort: "30281"
+ # application's front end hostname. Must be resolvable on the client side environment
+ msbDiscoveryHostName: "msb.api.discovery.simpledemo.onap.org"
# default number of instances
replicaCount: 1
portal.api.impl.class = org.onap.portalapp.service.OnBoardingApiServiceImpl
# CSP Global Log On for single sign on
-ecomp_redirect_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+ecomp_redirect_url = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/login.htm
# URL of the ECOMP Portal REST API
-ecomp_rest_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/auxapi
+ecomp_rest_url = http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/auxapi
# Applications do not need to run a UEB listener in 1610.
ueb_listeners_enable = false
#authenticate user server
#TODO: what is this URL supposed to be pointing to? Nothing in portal opens 8383
-authenticate_user_server=http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/allUsers
+authenticate_user_server=http://{{.Values.global.portalHostName}}:8383/openid-connect-server-webapp/allUsers
#cookie domain
cookie_domain = onap.org
security.user.password=ENC(IjywcRnI9+nuVEh9+OFFiRWAjBT1n718)
initialization.default.widgets=true
-initialization.widgetData.url=http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/commonWidgets
+initialization.widgetData.url=http://{{.Values.global.portalHostName}}:{{.Values.global.portalPort}}/ONAPPORTAL/commonWidgets
## Account Basic Authentication Properties
account.user.name=portal
+++ /dev/null
-#!/bin/bash
-
-usage () { echo "Usage : $0 <namespace> <helm release name>"; }
-
-READY_JSONPATH='{range .items[*]}{@.metadata.name}:{range @.status.conditions[*]}{@.type}={@.status};{end}{end}'
-
-NAMESPACE=$1
-RELEASE_NAME=$2
-
-if [ ! "$NAMESPACE" ] || [ ! "$RELEASE_NAME" ]
-then
- usage
- exit 1
-fi
-
-PORTAL_POD_NAME=`kubectl get pods --namespace $NAMESPACE --selector=app=portal-app,release=$RELEASE_NAME \
--o jsonpath='{.items[*].metadata.name}' -o jsonpath="$READY_JSONPATH" | grep "Ready=True"|awk -F: '{print $1}' `
-SDC_POD_NAME=`kubectl get pods --namespace $NAMESPACE --selector=app=sdc-fe,release=$RELEASE_NAME \
--o jsonpath='{.items[*].metadata.name}' -o jsonpath="$READY_JSONPATH" | grep "Ready=True" |awk -F: '{print $1}'`
-VID_POD_NAME=`kubectl get pods --namespace $NAMESPACE --selector=app=vid,release=$RELEASE_NAME \
--o jsonpath='{.items[*].metadata.name}' -o jsonpath="$READY_JSONPATH" | grep "Ready=True" |awk -F: '{print $1}'`
-POLICY_POD_NAME=`kubectl get pods --namespace $NAMESPACE --selector=app=pap,release=$RELEASE_NAME \
--o jsonpath='{.items[*].metadata.name}' -o jsonpath="$READY_JSONPATH" | grep "Ready=True" |awk -F: '{print $1}'`
-PORTALSDK_POD_NAME=`kubectl get pods --namespace $NAMESPACE --selector=app=portal-sdk,release=$RELEASE_NAME \
--o jsonpath='{.items[*].metadata.name}' -o jsonpath="$READY_JSONPATH" | grep "Ready=True" |awk -F: '{print $1}'`
-
-#TODO: Add more as testing progresses
-[[ -z "$PORTAL_POD_NAME" ]] && { echo "WARNING: portal-app is not running in your Kubernetes cluster"; }
-[[ -z "$SDC_POD_NAME" ]] && { echo "WARNING: sdc-fe is not running in your Kubernetes cluster"; }
-[[ -z "$VID_POD_NAME" ]] && { echo "WARNING: vid is not running in your Kubernetes cluster"; }
-[[ -z "$POLICY_POD_NAME" ]] && { echo "WARNING: pap is not running in your Kubernetes cluster"; }
-[[ -z "$PORTALSDK_POD_NAME" ]] && { echo "WARNING: portal-sdk is not running in your Kubernetes cluster"; }
-
-if [ ! -z "$PORTAL_POD_NAME" ]
-then
- kubectl -n $NAMESPACE port-forward "$PORTAL_POD_NAME" 8989:8080 &
- PORTAL_PID=$!
-fi
-
-if [ ! -z "$VID_POD_NAME" ]
-then
- kubectl -n $NAMESPACE port-forward "$VID_POD_NAME" 8080:8080 &
- VID_PID=$!
-fi
-
-if [ ! -z "$SDC_POD_NAME" ]
-then
- kubectl -n $NAMESPACE port-forward "$SDC_POD_NAME" 8181:8181 &
- SDC_PID=$!
-fi
-
-if [ ! -z "$POLICY_POD_NAME" ]
-then
- kubectl -n $NAMESPACE port-forward "$POLICY_POD_NAME" 8443:8443 &
- POLICY_PID=$!
-fi
-
-if [ ! -z "$PORTALSDK_POD_NAME" ]
-then
- kubectl -n $NAMESPACE port-forward "$PORTALSDK_POD_NAME" 8990:8080 &
- PORTALSDK_PID=$!
-fi
-
-trap "{ kill -9 $PORTAL_PID $VID_PID $SDC_PID $POLICY_PID $PORTALSDK_PID; exit 0; }" INT
-echo -e $'Press Ctrl+C to exit...\n'
-
-while :
-do
- sleep 60
-done
\ No newline at end of file
global:
env:
tomcatDir: "/opt/apache-tomcat-8.0.37"
+ # portal frontend port
+ portalPort: "8989"
+ # application's front end hostname. Must be resolvable on the client side environment
+ portalHostName: "portal.api.simpledemo.onap.org"
+
config:
logstashServiceName: log-ls
logstashPort: 5044
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+{{ $pvNum := default 1 .Values.replicaCount | int }}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data0
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}0
+{{ if gt $pvNum 1 }}
+---
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data1
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}1
+{{ end }}
+{{ if gt $pvNum 2 }}
+---
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data2
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.fullname" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}2
+{{ end }}
+{{- end -}}
\ No newline at end of file
- mountPath: /opt/onap/sdnc/svclogic/config/svclogic.properties
name: onap-sdnc-svclogic-config
subPath: svclogic.properties
+ - mountPath: {{ .Values.persistence.mdsalPath }}
+ name: {{ include "common.fullname" . }}-data
- mountPath: /var/log/onap
name: logs
resources:
name: logs
- mountPath: /usr/share/filebeat/data
name: data-filebeat
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
volumes:
- name: localtime
hostPath:
- key: svclogic.properties
path: svclogic.properties
mode: 0644
-
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ {{ if not .Values.persistence.enabled }}
+ - name: {{ include "common.fullname" . }}-data
+ emptyDir: {}
+ {{ else }}
+ volumeClaimTemplates:
+ - metadata:
+ name: {{ include "common.fullname" . }}-data
+ labels:
+ name: {{ include "common.fullname" . }}
+ spec:
+ accessModes: [ {{ .Values.persistence.accessMode }} ]
+ storageClassName: {{ include "common.fullname" . }}-data
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+ {{ end }}
\ No newline at end of file
geoNodePort5: 65
geoNodePort6: 66
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ accessMode: ReadWriteOnce
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: sdnc/mdsal
+ mdsalPath: /opt/opendaylight/current/daexim
+
ingress:
enabled: false
Code Review / oom.git / commitdiff