helm_version:
description: helm version to be installed
- default: v2.8.2
+ default: v2.9.1
dsl_definitions:
.. table:: OOM Software Requirements
- ============== ========== ===== ======= ========
- Release Kubernetes Helm kubectl Docker
- ============== ========== ===== ======= ========
- amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
- beijing/master 1.8.10 2.8.2 1.8.10 17.03.x
- ============== ========== ===== ======= ========
+ ============== ========== ===== ======= ========
+ Release Kubernetes Helm kubectl Docker
+ ============== ========== ===== ======= ========
+ amsterdam 1.7.x 2.3.x 1.7.x 1.12.x
+ beijing 1.8.10 2.8.2 1.8.10 17.03.x
+ casablanca/master 1.8.10 2.9.1 1.8.10 17.03.x
+ ============== ========== ===== ======= ========
Minimum Hardware Configuration
==============================
.. note::
To generate openStackEncryptedPasswordHere :
- root@olc-rancher:~# cd so/resources/config/mso/
+ ``root@olc-rancher:~# cd so/resources/config/mso/``
- root@olc-rancher:~/oom/kubernetes/so/resources/config/mso# echo -n "<openstack tenant password>" | openssl aes-128-ecb -e -K `cat encryption.key` -nosalt | xxd -c 256 -p
+ ``root@olc-rancher:~/oom/kubernetes/so/resources/config/mso# echo -n "<openstack tenant password>" | openssl aes-128-ecb -e -K `cat encryption.key` -nosalt | xxd -c 256 -p``
**Step 3.** To setup a local Helm server to server up the ONAP charts::
Assign Floating IP for external access
--------------------------------------
-.. image:: K8s-Assign_Floating_IP_for_external_access.jpeg
-
.. image:: K8s-Manage_Floating_IP_Associations.jpeg
.. image:: K8s-Launch_Instance.jpeg
will be displayed::
ubuntu@sb4-k8s-1:~$ helm list
- Error: incompatible versions c1ient[v2.8.2] server[v2.6.1]
+ Error: incompatible versions c1ient[v2.9.1] server[v2.6.1]
ubuntu@sb4-k8s-1:~$
7. Upgrade the server-side component of helm (tiller) via `helm init --upgrade`::
~~~~~~~~~~~~
Helm is used by OOM for package and configuration management. To install Helm, enter the following::
- > wget http://storage.googleapis.com/kubernetes-helm/helm-v2.8.2-linux-amd64.tar.gz
- > tar -zxvf helm-v2.8.2-linux-amd64.tar.gz
+ > wget http://storage.googleapis.com/kubernetes-helm/helm-v2.9.1-linux-amd64.tar.gz
+ > tar -zxvf helm-v2.9.1-linux-amd64.tar.gz
> sudo mv linux-amd64/helm /usr/local/bin/helm
Verify the Helm version with::
DOCKER_VERSION=17.03
KUBECTL_VERSION=1.8.10
-HELM_VERSION=2.8.2
+HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
#!/bin/bash
DOCKER_VERSION=17.03
-RANCHER_VERSION=1.6.14
+RANCHER_VERSION=1.6.18
KUBECTL_VERSION=1.8.10
-HELM_VERSION=2.8.2
+HELM_VERSION=2.9.1
# setup root access - default login: oom/oom - comment out to restrict access too ssh key only
sed -i 's/PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:2.0.0
+image: onap/aaf/smsquorumclient:latest
pullPolicy: Always
# flag to enable debugging - application support required
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
+ initContainers:
+ - image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "aaf-sms-vault"
+ - --container-name
+ - "aaf-sms-vault-backend"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
containers:
- image: "{{ include "common.repository" . }}/{{ .Values.image }}"
- name: {{ include "common.name" . }}
imagePullPolicy: {{ .Values.pullPolicy }}
+ name: {{ include "common.name" . }}
command: ["/sms/bin/sms"]
workingDir: /sms/
ports:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms:2.0.0
+image: onap/aaf/sms:latest
pullPolicy: Always
# flag to enable debugging - application support required
--- /dev/null
+"dynamic_templates":[
+ {
+ "strings":{
+ "match_mapping_type":"string",
+ "match": "*",
+ "mapping":{
+ "type":"text",
+ "fielddata":true
+ }
+ }
+ }
+],
--- /dev/null
+{
+ "attr-translations": [
+ {
+ "from": "\"type\":\"string\",\"index\":\"analyzed\"",
+ "to": "\"type\":\"text\",\"index\":\"true\""
+ },
+ {
+ "from": "\"type\":\"string\",\"index\":\"not_analyzed\"",
+ "to": "\"type\":\"keyword\",\"index\":\"true\""
+ },
+ {
+ "from": "\"type\":\"string\"",
+ "to": "\"type\":\"text\""
+ },
+ {
+ "from": "searchable",
+ "to": "index"
+ }
+ ]
+}
\ No newline at end of file
subPath: elastic-search.properties
name: {{ include "common.fullname" . }}-service-config
- mountPath: /opt/app/search-data-service/config/analysis-config.json
- subPath: filter-config.json
+ subPath: analysis-config.json
+ name: {{ include "common.fullname" . }}-service-config
+ - mountPath: /opt/app/search-data-service/config/es-payload-translation.json
+ subPath: es-payload-translation.json
+ name: {{ include "common.fullname" . }}-service-config
+ - mountPath: /opt/app/search-data-service/config/dynamic-custom-template.json
+ subPath: dynamic-custom-template.json
name: {{ include "common.fullname" . }}-service-config
- mountPath: /opt/app/search-data-service/config/auth/tomcat_keystore
subPath: tomcat_keystore
metadata:
labels:
app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
name: {{ .Release.Name }}
spec:
initContainers:
# probe configuration parameters
liveness:
- initialDelaySeconds: 30
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
--- /dev/null
+{
+ "service": {
+ "name": "Health Check: Application Authorization Framework",
+ "checks": [
+ {
+ "id": "aaf-service",
+ "name": "AAF Service Health Check",
+ "http": "https://aaf-service:8100/authz/perms/user/demo@people.osaaf.org",
+ "header": {
+ "Authorization": ["Basic ZGVtb0BwZW9wbGUub3NhYWYub3JnOmRlbW8xMjM0NTYh"],
+ "X-TransactionId": ["ConsulHealthCheck"],
+ "X-FromAppId": ["healthcheck"]
+ },
+ "tls_skip_verify": true,
+ "interval": "20s",
+ "timeout": "5s"
+ }
+ ]
+ }
+}
-# Copyright © 2018 ZTE
+# Copyright © 2017 Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
apiVersion: v1
-description: ONAP Service Design and Creation Common Workflow Design
-name: sdc-wfd
-version: 2.0.0
\ No newline at end of file
+description: ONAP optional tools
+name: contrib
+version: 2.0.0
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Netbox IPAM
+name: netbox
+version: 2.0.0
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+make-netbox:
+ cd charts && helm dep up netbox-postgres && helm dep up netbox-nginx && helm dep up netbox-app
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Netbox - Application (WSGI + Gunicorn)
+name: netbox-app
+version: 2.0.0
--- /dev/null
+import os
+import socket
+
+# For reference see http://netbox.readthedocs.io/en/latest/configuration/mandatory-settings/
+# Based on https://github.com/digitalocean/netbox/blob/develop/netbox/netbox/configuration.example.py
+
+# Read secret from file
+def read_secret(secret_name):
+ try:
+ f = open('/run/secrets/' + secret_name, 'r', encoding='utf-8')
+ except EnvironmentError:
+ return ''
+ else:
+ with f:
+ return f.readline().strip()
+
+BASE_DIR = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+
+#########################
+# #
+# Required settings #
+# #
+#########################
+
+# This is a list of valid fully-qualified domain names (FQDNs) for the NetBox server. NetBox will not permit write
+# access to the server via any other hostnames. The first FQDN in the list will be treated as the preferred name.
+#
+# Example: ALLOWED_HOSTS = ['netbox.example.com', 'netbox.internal.local']
+ALLOWED_HOSTS = os.environ.get('ALLOWED_HOSTS', socket.gethostname()).split(' ')
+
+# PostgreSQL database configuration.
+DATABASE = {
+ 'NAME': os.environ.get('DB_NAME', 'netbox'), # Database name
+ 'USER': os.environ.get('DB_USER', ''), # PostgreSQL username
+ 'PASSWORD': os.environ.get('DB_PASSWORD', read_secret('db_password')),
+ # PostgreSQL password
+ 'HOST': os.environ.get('DB_HOST', 'localhost'), # Database server
+ 'PORT': os.environ.get('DB_PORT', ''), # Database port (leave blank for default)
+}
+
+# This key is used for secure generation of random numbers and strings. It must never be exposed outside of this file.
+# For optimal security, SECRET_KEY should be at least 50 characters in length and contain a mix of letters, numbers, and
+# symbols. NetBox will not run without this defined. For more information, see
+# https://docs.djangoproject.com/en/dev/ref/settings/#std:setting-SECRET_KEY
+SECRET_KEY = os.environ.get('SECRET_KEY', read_secret('secret_key'))
+
+#########################
+# #
+# Optional settings #
+# #
+#########################
+
+# Specify one or more name and email address tuples representing NetBox administrators. These people will be notified of
+# application errors (assuming correct email settings are provided).
+ADMINS = [
+ # ['John Doe', 'jdoe@example.com'],
+]
+
+# Optionally display a persistent banner at the top and/or bottom of every page. HTML is allowed. To display the same
+# content in both banners, define BANNER_TOP and set BANNER_BOTTOM = BANNER_TOP.
+BANNER_TOP = os.environ.get('BANNER_TOP', '')
+BANNER_BOTTOM = os.environ.get('BANNER_BOTTOM', '')
+
+# Text to include on the login page above the login form. HTML is allowed.
+BANNER_LOGIN = os.environ.get('BANNER_LOGIN', '')
+
+# Base URL path if accessing NetBox within a directory. For example, if installed at http://example.com/netbox/, set:
+# BASE_PATH = 'netbox/'
+BASE_PATH = os.environ.get('BASE_PATH', '')
+
+# API Cross-Origin Resource Sharing (CORS) settings. If CORS_ORIGIN_ALLOW_ALL is set to True, all origins will be
+# allowed. Otherwise, define a list of allowed origins using either CORS_ORIGIN_WHITELIST or
+# CORS_ORIGIN_REGEX_WHITELIST. For more information, see https://github.com/ottoyiu/django-cors-headers
+CORS_ORIGIN_ALLOW_ALL = os.environ.get('CORS_ORIGIN_ALLOW_ALL', 'False').lower() == 'true'
+CORS_ORIGIN_WHITELIST = os.environ.get('CORS_ORIGIN_WHITELIST', '').split(' ')
+CORS_ORIGIN_REGEX_WHITELIST = [
+ # r'^(https?://)?(\w+\.)?example\.com$',
+]
+
+# Set to True to enable server debugging. WARNING: Debugging introduces a substantial performance penalty and may reveal
+# sensitive information about your installation. Only enable debugging while performing testing. Never enable debugging
+# on a production system.
+DEBUG = os.environ.get('DEBUG', 'False').lower() == 'true'
+
+# Email settings
+EMAIL = {
+ 'SERVER': os.environ.get('EMAIL_SERVER', 'localhost'),
+ 'PORT': int(os.environ.get('EMAIL_PORT', 25)),
+ 'USERNAME': os.environ.get('EMAIL_USERNAME', ''),
+ 'PASSWORD': os.environ.get('EMAIL_PASSWORD', read_secret('email_password')),
+ 'TIMEOUT': int(os.environ.get('EMAIL_TIMEOUT', 10)), # seconds
+ 'FROM_EMAIL': os.environ.get('EMAIL_FROM', ''),
+}
+
+# Enforcement of unique IP space can be toggled on a per-VRF basis.
+# To enforce unique IP space within the global table (all prefixes and IP addresses not assigned to a VRF),
+# set ENFORCE_GLOBAL_UNIQUE to True.
+ENFORCE_GLOBAL_UNIQUE = os.environ.get('ENFORCE_GLOBAL_UNIQUE', 'False').lower() == 'true'
+
+# Enable custom logging. Please see the Django documentation for detailed guidance on configuring custom logs:
+# https://docs.djangoproject.com/en/1.11/topics/logging/
+LOGGING = {}
+
+# Setting this to True will permit only authenticated users to access any part of NetBox. By default, anonymous users
+# are permitted to access most data in NetBox (excluding secrets) but not make any changes.
+LOGIN_REQUIRED = os.environ.get('LOGIN_REQUIRED', 'False').lower() == 'true'
+
+# Base URL path if accessing NetBox within a directory. For example, if installed at http://example.com/netbox/, set:
+# BASE_PATH = 'netbox/'
+BASE_PATH = os.environ.get('BASE_PATH', '')
+
+# Setting this to True will display a "maintenance mode" banner at the top of every page.
+MAINTENANCE_MODE = os.environ.get('MAINTENANCE_MODE', 'False').lower() == 'true'
+
+# An API consumer can request an arbitrary number of objects =by appending the "limit" parameter to the URL (e.g.
+# "?limit=1000"). This setting defines the maximum limit. Setting it to 0 or None will allow an API consumer to request
+# all objects by specifying "?limit=0".
+MAX_PAGE_SIZE = int(os.environ.get('MAX_PAGE_SIZE', 1000))
+
+# The file path where uploaded media such as image attachments are stored. A trailing slash is not needed. Note that
+# the default value of this setting is derived from the installed location.
+MEDIA_ROOT = os.environ.get('MEDIA_ROOT', os.path.join(BASE_DIR, 'media'))
+
+# Credentials that NetBox will use to access live devices.
+NAPALM_USERNAME = os.environ.get('NAPALM_USERNAME', '')
+NAPALM_PASSWORD = os.environ.get('NAPALM_PASSWORD', read_secret('napalm_password'))
+
+# NAPALM timeout (in seconds). (Default: 30)
+NAPALM_TIMEOUT = int(os.environ.get('NAPALM_TIMEOUT', 30))
+
+# NAPALM optional arguments (see http://napalm.readthedocs.io/en/latest/support/#optional-arguments). Arguments must
+# be provided as a dictionary.
+NAPALM_ARGS = {}
+
+# Determine how many objects to display per page within a list. (Default: 50)
+PAGINATE_COUNT = int(os.environ.get('PAGINATE_COUNT', 50))
+
+# When determining the primary IP address for a device, IPv6 is preferred over IPv4 by default. Set this to True to
+# prefer IPv4 instead.
+PREFER_IPV4 = os.environ.get('PREFER_IPV4', 'False').lower() == 'true'
+
+# The file path where custom reports will be stored. A trailing slash is not needed. Note that the default value of
+# this setting is derived from the installed location.
+REPORTS_ROOT = os.environ.get('REPORTS_ROOT', '/etc/netbox/reports')
+
+# Time zone (default: UTC)
+TIME_ZONE = os.environ.get('TIME_ZONE', 'UTC')
+
+# Date/time formatting. See the following link for supported formats:
+# https://docs.djangoproject.com/en/dev/ref/templates/builtins/#date
+DATE_FORMAT = os.environ.get('DATE_FORMAT', 'N j, Y')
+SHORT_DATE_FORMAT = os.environ.get('SHORT_DATE_FORMAT', 'Y-m-d')
+TIME_FORMAT = os.environ.get('TIME_FORMAT', 'g:i a')
+SHORT_TIME_FORMAT = os.environ.get('SHORT_TIME_FORMAT', 'H:i:s')
+DATETIME_FORMAT = os.environ.get('DATETIME_FORMAT', 'N j, Y g:i a')
+SHORT_DATETIME_FORMAT = os.environ.get('SHORT_DATETIME_FORMAT', 'Y-m-d H:i')
--- /dev/null
+command = '/usr/bin/gunicorn'
+pythonpath = '/opt/netbox/netbox'
+bind = '0.0.0.0:{{ .Values.service.internalPort }}'
+workers = 3
+errorlog = '-'
+accesslog = '-'
+capture_output = False
+loglevel = 'debug'
--- /dev/null
+import ldap
+import os
+
+from django_auth_ldap.config import LDAPSearch, GroupOfNamesType
+
+# Server URI
+AUTH_LDAP_SERVER_URI = os.environ.get('AUTH_LDAP_SERVER_URI', '')
+
+# The following may be needed if you are binding to Active Directory.
+AUTH_LDAP_CONNECTION_OPTIONS = {
+ ldap.OPT_REFERRALS: 0
+}
+
+# Set the DN and password for the NetBox service account.
+AUTH_LDAP_BIND_DN = os.environ.get('AUTH_LDAP_BIND_DN', '')
+AUTH_LDAP_BIND_PASSWORD = os.environ.get('AUTH_LDAP_BIND_PASSWORD', '')
+
+# Include this setting if you want to ignore certificate errors. This might be needed to accept a self-signed cert.
+# Note that this is a NetBox-specific setting which sets:
+# ldap.set_option(ldap.OPT_X_TLS_REQUIRE_CERT, ldap.OPT_X_TLS_NEVER)
+LDAP_IGNORE_CERT_ERRORS = os.environ.get('LDAP_IGNORE_CERT_ERRORS', 'False').lower() == 'true'
+
+AUTH_LDAP_USER_SEARCH = LDAPSearch(os.environ.get('AUTH_LDAP_USER_SEARCH_BASEDN', ''),
+ ldap.SCOPE_SUBTREE,
+ "(sAMAccountName=%(user)s)")
+
+# This search ought to return all groups to which the user belongs. django_auth_ldap uses this to determine group
+# heirarchy.
+AUTH_LDAP_GROUP_SEARCH = LDAPSearch(os.environ.get('AUTH_LDAP_GROUP_SEARCH_BASEDN', ''), ldap.SCOPE_SUBTREE,
+ "(objectClass=group)")
+AUTH_LDAP_GROUP_TYPE = GroupOfNamesType()
+
+# Define a group required to login.
+AUTH_LDAP_REQUIRE_GROUP = os.environ.get('AUTH_LDAP_REQUIRE_GROUP_DN', '')
+
+# Define special user types using groups. Exercise great caution when assigning superuser status.
+AUTH_LDAP_USER_FLAGS_BY_GROUP = {
+ "is_active": os.environ.get('AUTH_LDAP_REQUIRE_GROUP_DN', ''),
+ "is_staff": os.environ.get('AUTH_LDAP_IS_ADMIN_DN', ''),
+ "is_superuser": os.environ.get('AUTH_LDAP_IS_SUPERUSER_DN', '')
+}
+
+# For more granular permissions, we can map LDAP groups to Django groups.
+AUTH_LDAP_FIND_GROUP_PERMS = os.environ.get('AUTH_LDAP_FIND_GROUP_PERMS', 'True').lower() == 'true'
+
+# Cache groups for one hour to reduce LDAP traffic
+AUTH_LDAP_CACHE_GROUPS = os.environ.get('AUTH_LDAP_CACHE_GROUPS', 'True').lower() == 'true'
+AUTH_LDAP_GROUP_CACHE_TIMEOUT = int(os.environ.get('AUTH_LDAP_CACHE_GROUPS', 3600))
+
+# Populate the Django user from the LDAP directory.
+AUTH_LDAP_USER_ATTR_MAP = {
+ "first_name": os.environ.get('AUTH_LDAP_ATTR_FIRSTNAME', 'givenName'),
+ "last_name": os.environ.get('AUTH_LDAP_ATTR_LASTNAME', 'sn'),
+ "email": os.environ.get('AUTH_LDAP_ATTR_MAIL', 'mail')
+}
--- /dev/null
+# text_field:
+# type: text
+# label: Custom Text
+# description: Enter text in a text field.
+# required: false
+# filterable: true
+# weight: 0
+# on_objects:
+# - dcim.models.Device
+# - dcim.models.Rack
+# - ipam.models.IPAddress
+# - ipam.models.Prefix
+# - tenancy.models.Tenant
+# - virtualization.models.VirtualMachine
+# integer_field:
+# type: integer
+# label: Custom Number
+# description: Enter numbers into an integer field.
+# required: true
+# filterable: true
+# weight: 10
+# on_objects:
+# - tenancy.models.Tenant
+# selection_field:
+# type: selection
+# label: Choose between items
+# required: false
+# filterable: true
+# weight: 30
+# on_objects:
+# - dcim.models.Device
+# choices:
+# - value: First Item
+# weight: 10
+# - value: Second Item
+# weight: 20
+# - value: Third Item
+# weight: 30
+# - value: Fifth Item
+# weight: 50
+# - value: Fourth Item
+# weight: 40
+# boolean_field:
+# type: boolean
+# label: Yes Or No?
+# required: true
+# filterable: true
+# default: "false" # important: but "false" in quotes!
+# weight: 90
+# on_objects:
+# - dcim.models.Device
+# url_field:
+# type: url
+# label: Hyperlink
+# description: Link to something nice.
+# required: true
+# filterable: false
+# on_objects:
+# - tenancy.models.Tenant
+# date_field:
+# type: date
+# label: Important Date
+# required: false
+# filterable: false
+# on_objects:
+# - dcim.models.Device
--- /dev/null
+# applications:
+# users:
+# - technical_user
+# readers:
+# users:
+# - reader
+# writers:
+# users:
+# - writer
--- /dev/null
+onap:
+ first_name: Steve
+ last_name: McQueen
+ email: steve.mcqueen@onap.org
+ password: onap123$
+ api_token: onceuponatimeiplayedwithnetbox20180814
+ is_staff: true # whether user is admin or not, default = false
+ is_active: true # whether user is active, default = true
+ is_superuser: true # Whether user has all edit rights or not, default = false
\ No newline at end of file
--- /dev/null
+#!/bin/bash
+
+# Create region
+
+echo "Create region: RegionOne"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/dcim/regions/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "RegionOne",
+ "slug": "RegionOne"
+}'
+
+# Create tenant group
+
+echo "Create tenant group: ONAP group"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/tenancy/tenant-groups/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "ONAP group",
+ "slug": "onap-group"
+}'
+
+# Create tenant
+
+echo "Create tenant ONAP in ONAP group"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/tenancy/tenants/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "ONAP",
+ "slug": "onap",
+ "group": 1,
+ "description": "ONAP tenant",
+ "comments": "Tenant for ONAP demo use cases"
+}'
+
+# Create site
+
+echo "Create ONAP demo site: Montreal Lab"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/dcim/sites/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "name": "Montreal Lab D3",
+ "slug": "mtl-lab-d3",
+ "region": 1,
+ "tenant": 1,
+ "facility": "Campus",
+ "time_zone": "Canada/Atlantic",
+ "description": "Site hosting the ONAP use cases",
+ "physical_address": "1 Graham Bell",
+ "shipping_address": "1 Graham Bell",
+ "contact_name": "Alexis",
+ "contact_phone": "0000000000",
+ "contact_email": "adetalhouet89@gmail.com",
+ "comments": "ONAP lab"
+}'
+
+# Create prefixes
+
+echo "Create Prefix for vFW protected network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "192.168.20.0/24",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for protected network - vFW use case"
+}'
+
+echo "Create Prefix for vFW unprotected network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "192.168.10.0/24",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for unprotected network - vFW use case"
+}'
+
+echo "Create Prefix for ONAP general purpose network"
+curl --silent -X POST \
+ http://{{ .Values.service.name }}:{{ .Values.service.internalPort }}/api/ipam/prefixes/ \
+ -H 'Authorization: Token onceuponatimeiplayedwithnetbox20180814' \
+ -H 'Content-Type: application/json' \
+ -d '{
+ "prefix": "10.0.0.0/8",
+ "site": 1,
+ "tenant": 1,
+ "is_pool": true,
+ "description": "IP Pool for ONAP - general purpose"
+}'
--- /dev/null
+from django.contrib.auth.models import Group, User
+from users.models import Token
+
+from ruamel.yaml import YAML
+
+with open('/opt/netbox/initializers/users.yml', 'r') as stream:
+ yaml=YAML(typ='safe')
+ users = yaml.load(stream)
+
+ if users is not None:
+ for username, user_details in users.items():
+ if not User.objects.filter(username=username):
+ user = User.objects.create_user(
+ username = username,
+ password = user_details.get('password', 0) or User.objects.make_random_password,
+ is_staff = user_details.get('is_staff', 0) or false,
+ is_superuser = user_details.get('is_superuser', 0) or false,
+ is_active = user_details.get('is_active', 0) or true,
+ first_name = user_details.get('first_name', 0),
+ last_name = user_details.get('last_name', 0),
+ email = user_details.get('email', 0))
+
+ print("👤 Created user ",username)
+
+ if user_details.get('api_token', 0):
+ Token.objects.create(user=user, key=user_details['api_token'])
\ No newline at end of file
--- /dev/null
+from django.contrib.auth.models import Group, User
+from ruamel.yaml import YAML
+
+with open('/opt/netbox/initializers/groups.yml', 'r') as stream:
+ yaml=YAML(typ='safe')
+ groups = yaml.load(stream)
+
+ if groups is not None:
+ for groupname, group_details in groups.items():
+ group, created = Group.objects.get_or_create(name=groupname)
+
+ if created:
+ print("👥 Created group", groupname)
+
+ for username in group_details['users']:
+ user = User.objects.get(username=username)
+
+ if user:
+ user.groups.add(group)
--- /dev/null
+from extras.constants import CF_TYPE_TEXT, CF_TYPE_INTEGER, CF_TYPE_BOOLEAN, CF_TYPE_DATE, CF_TYPE_URL, CF_TYPE_SELECT
+from extras.models import CustomField, CustomFieldChoice
+
+from ruamel.yaml import YAML
+
+text_to_fields = {
+ 'boolean': CF_TYPE_BOOLEAN,
+ 'date': CF_TYPE_DATE,
+ 'integer': CF_TYPE_INTEGER,
+ 'selection': CF_TYPE_SELECT,
+ 'text': CF_TYPE_TEXT,
+ 'url': CF_TYPE_URL,
+}
+
+def get_class_for_class_path(class_path):
+ import importlib
+ from django.contrib.contenttypes.models import ContentType
+
+ module_name, class_name = class_path.rsplit(".", 1)
+ module = importlib.import_module(module_name)
+ clazz = getattr(module, class_name)
+ return ContentType.objects.get_for_model(clazz)
+
+with open('/opt/netbox/initializers/custom_fields.yml', 'r') as stream:
+ yaml = YAML(typ='safe')
+ customfields = yaml.load(stream)
+
+ if customfields is not None:
+ for cf_name, cf_details in customfields.items():
+ custom_field, created = CustomField.objects.get_or_create(name = cf_name)
+
+ if created:
+ if cf_details.get('default', 0):
+ custom_field.default = cf_details['default']
+
+ if cf_details.get('description', 0):
+ custom_field.description = cf_details['description']
+
+ if cf_details.get('filterable', 0):
+ custom_field.is_filterables = cf_details['filterable']
+
+ if cf_details.get('label', 0):
+ custom_field.label = cf_details['label']
+
+ for object_type in cf_details.get('on_objects', []):
+ custom_field.obj_type.add(get_class_for_class_path(object_type))
+
+ if cf_details.get('required', 0):
+ custom_field.required = cf_details['required']
+
+ if cf_details.get('type', 0):
+ custom_field.type = text_to_fields[cf_details['type']]
+
+ if cf_details.get('weight', 0):
+ custom_field.weight = cf_details['weight']
+
+ custom_field.save()
+
+ for choice_details in cf_details.get('choices', []):
+ choice = CustomFieldChoice.objects.create(
+ field=custom_field,
+ value=choice_details['value'])
+
+ if choice_details.get('weight', 0):
+ choice.weight = choice_details['weight']
+ choice.save()
+
+ print("🔧 Created custom field", cf_name)
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-provisioning-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/provisioning/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configuration-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/configuration/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-initializers-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/initializers/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-startupscripts-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/startup_scripts/*").AsConfig . | indent 2 }}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /api/dcim/regions/
+ port: {{ .Values.service.internalPort }}
+ scheme: HTTP
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: DB_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-pass
+ key: DB_PASSWORD
+ - name: EMAIL_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-pass
+ key: EMAIL_PASSWORD
+ - name: NAPALM_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-pass
+ key: NAPALM_PASSWORD
+ - name: SECRET_KEY
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-pass
+ key: SECRET_KEY
+ - name: SUPERUSER_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-pass
+ key: SUPERUSER_PASSWORD
+ - name: SUPERUSER_API_TOKEN
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-pass
+ key: SUPERUSER_API_TOKEN
+ - name: ALLOWED_HOSTS
+ value: {{ .Values.config.allowedHosts | quote }}
+ - name: DB_NAME
+ value: {{ .Values.config.dbName }}
+ - name: DB_USER
+ value: {{ .Values.config.dbUser }}
+ - name: DB_HOST
+ value: {{ .Values.config.dbHost }}
+ - name: EMAIL_SERVER
+ value: {{ .Values.config.emailServer }}
+ - name: EMAIL_PORT
+ value: {{ .Values.config.emailPort | quote }}
+ - name: EMAIL_USERNAME
+ value: {{ .Values.config.emailUsername }}
+ - name: EMAIL_TIMEOUT
+ value: {{ .Values.config.emailTimeout | quote }}
+ - name: EMAIL_FROM
+ value: {{ .Values.config.emailFrom }}
+ - name: MEDIA_ROOT
+ value: {{ .Values.config.mediaRoot }}
+ - name: NAPALM_USERNAME
+ value: {{ .Values.config.napalmUsername }}
+ - name: NAPALM_TIMEOUT
+ value: {{ .Values.config.napalmTimeout | quote }}
+ - name: MAX_PAGE_SIZE
+ value: {{ .Values.config.maxPageSize | quote }}
+ - name: SUPERUSER_NAME
+ value: {{ .Values.config.superuserName }}
+ - name: SUPERUSER_EMAIL
+ value: {{ .Values.config.superuserEmail }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /opt/netbox/startup_scripts
+ name: {{ include "common.fullname" . }}-startupscripts-config
+ - mountPath: /opt/netbox/initializers
+ name: {{ include "common.fullname" . }}-initializers-config
+ - mountPath: /etc/netbox/config
+ name: {{ include "common.fullname" . }}-configuration-config
+ - name: {{ include "common.fullname" . }}
+ mountPath: /opt/netbox/netbox/static
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-{{ .Values.persistence.staticPvName }}
+ - name: {{ include "common.fullname" . }}-startupscripts-config
+ configMap:
+ name: {{ include "common.fullname" . }}-startupscripts-configmap
+ - name: {{ include "common.fullname" . }}-initializers-config
+ configMap:
+ name: {{ include "common.fullname" . }}-initializers-configmap
+ - name: {{ include "common.fullname" . }}-configuration-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configuration-configmap
\ No newline at end of file
--- /dev/null
+# Copyright © 2018 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+ name: {{ include "common.fullname" . }}-provisioning
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}-job
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ backoffLimit: 5
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}-provisioning-job
+ release: {{ .Release.Name }}
+ spec:
+ restartPolicy: Never
+ initContainers:
+ - name: {{ include "common.name" . }}-init-readiness
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - netbox-app
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}-provisioning-job
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-provisioning
+ mountPath: /tmp
+ command:
+ - /bin/bash
+ - ./tmp/provision.sh
+ volumes:
+ - name: {{ include "common.fullname" . }}-provisioning
+ configMap:
+ name: {{ include "common.fullname" . }}-provisioning-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Never
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ .Release.Name }}-{{ .Values.persistence.staticPvName }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ .Release.Name }}-{{ .Values.persistence.staticPvName }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}/app
+{{- end -}}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ .Release.Name }}-{{ .Values.persistence.staticPvName }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ {{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+ {{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ .Release.Name }}-{{ .Values.persistence.staticPvName }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+ {{- if .Values.persistence.storageClass }}
+ {{- if (eq "-" .Values.persistence.storageClass) }}
+ storageClassName: ""
+ {{- else }}
+ storageClassName: "{{ .Values.persistence.storageClass }}"
+ {{- end }}
+ {{- end }}
+{{- end -}}
\ No newline at end of file
--- /dev/null
+{{/*
+# Copyright © 2018 Bell Canada, Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Secret
+metadata:
+ name: {{ include "common.fullname" . }}-pass
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+type: Opaque
+data:
+ DB_PASSWORD: {{ .Values.config.dbPassword | b64enc | quote }}
+ EMAIL_PASSWORD: {{ .Values.config.emailPassword | b64enc | quote }}
+ NAPALM_PASSWORD: {{ .Values.config.napalmPassword | b64enc | quote }}
+ SECRET_KEY: {{ .Values.config.secretKey | b64enc | quote }}
+ SUPERUSER_PASSWORD: {{ .Values.config.superuserPassword | b64enc | quote }}
+ SUPERUSER_API_TOKEN: {{ .Values.config.superuserAPIToken | b64enc | quote }}
\ No newline at end of file
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ name: {{ include "common.name" . }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ name: {{ include "common.name" . }}
+ targetPort: {{ .Values.service.internalPort }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+global: # global defaults
+ nodePortPrefix: 302
+ persistence: {}
+
+config:
+ # Secrets configuration values
+ dbPassword: J5brHrAXFLQSif0K
+ emailPassword: password
+ napalmPassword: password
+ secretKey: r8OwDznj!!dci#P9ghmRfdu1Ysxm0AiPeDCQhKE+N_rClfWNj
+ superuserPassword: admin
+ superuserAPIToken: 0123456789abcdef0123456789abcdef01234567
+
+ # Remaining environment configuration values
+ allowedHosts: "*"
+ dbName: netbox
+ dbUser: netbox
+ dbHost: netbox-postgres
+ emailServer: localhost
+ emailPort: 25
+ emailUsername: netbox
+ emailTimeout: 5
+ emailFrom: netbox@bar.com
+ mediaRoot: /opt/netbox/netbox/media
+ napalmUsername: napalm
+ napalmTimeout: 10
+ maxPageSize: 0
+ superuserName: admin
+ superuserEmail: admin@onap.org
+
+repository: docker.io
+image: ninech/netbox:v2.3.5
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: netbox-app
+ externalPort: 8001
+ internalPort: 8001
+ portName: netbox-app
+
+ingress:
+ enabled: false
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ ##
+ # storageClass: "-"
+ accessMode: ReadWriteMany
+ size: 100Mi
+ mountPath: /dockerdata-nfs
+ mountSubPath: netbox/shared
+
+ # Names used for shared pv/pvcs across App & Nginx containers
+ staticPvName: netbox-static
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+resources: {}
\ No newline at end of file
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Netbox - Nginx web server
+name: netbox-nginx
+version: 2.0.0
--- /dev/null
+worker_processes 1;
+
+events {
+ worker_connections 1024;
+}
+
+http {
+ include /etc/nginx/mime.types;
+ default_type application/octet-stream;
+ sendfile on;
+ tcp_nopush on;
+ keepalive_timeout 65;
+ gzip on;
+ server_tokens off;
+ client_max_body_size 10M;
+
+ server {
+ listen {{ .Values.service.internalPort }};
+ server_name {{ .Values.service.portName }};
+ access_log off;
+
+ location /static/ {
+ alias /opt/netbox/netbox/static/;
+ }
+
+ location / {
+ proxy_pass http://netbox-app:8001;
+ proxy_set_header X-Forwarded-Host $http_host;
+ proxy_set_header X-Real-IP $remote_addr;
+ proxy_set_header X-Forwarded-Proto $scheme;
+ add_header P3P 'CP="ALL DSP COR PSAa PSDa OUR NOR ONL UNI COM NAV"';
+ }
+ }
+}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-config-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["nginx"]
+ args: ["-c", "/etc/netbox-nginx/nginx.conf","-g", "daemon off;"]
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}
+ mountPath: /opt/netbox/netbox/static
+ - name: {{ include "common.fullname" . }}-config
+ mountPath: /etc/netbox-nginx
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-config-configmap
+ - name: {{ include "common.fullname" . }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-{{ .Values.persistence.staticPvName }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+global: # global defaults
+ nodePortPrefix: 302
+ persistence: {}
+ pullPolicy: Always
+
+# application image
+repository: docker.io
+image: nginx:1.13-alpine
+pullPolicy: Always
+
+ingress:
+ enabled: false
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ ##
+ # storageClass: "-"
+ accessMode: ReadWriteMany
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: netbox/nginx/data
+
+ # Names used for shared pv/pvcs across App & Nginx containers
+ staticPvName: netbox-static
+
+service:
+ type: NodePort
+ name: netbox-nginx
+ portName: netbox-nginx
+ internalPort: 8080
+ nodePort: 69
+
+resources: {}
\ No newline at end of file
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Netbox Posgres database
+name: netbox-postgres
+version: 2.0.0
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-docker-entry-initd
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/cassandra/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
\ No newline at end of file
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ env:
+ - name: POSTGRES_USER
+ value: "{{ .Values.config.postgresUser }}"
+ - name: POSTGRES_PASSWORD
+ value: "{{ .Values.config.postgresPassword }}"
+ - name: POSTGRES_DB
+ value: "{{ .Values.config.postgresDB }}"
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-data
+ mountPath: /var/lib/postgresql/data
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ {{- if .Values.persistence.enabled }}
+ - name: {{ include "common.fullname" . }}-data
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+ storageClassName: ""
+{{- else }}
+ storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+global: # global defaults
+ nodePortPrefix: 302
+ persistence: {}
+
+# application image
+repository: docker.io
+image: postgres:10.2-alpine
+pullPolicy: Always
+
+# application configuration
+config:
+ postgresUser: netbox
+ postgresPassword: J5brHrAXFLQSif0K
+ postgresDB: netbox
+
+ingress:
+ enabled: false
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ ##
+ # storageClass: "-"
+ accessMode: ReadWriteMany
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: netbox/postgres/data
+service:
+ type: ClusterIP
+ name: netbox-postgres
+ portName: netbox-postgres
+ internalPort: 5432
+ externalPort: 5432
+
+resources: {}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+*/}}
+{{- define "fullname" -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
--- /dev/null
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{- if .Values.ingress.enabled -}}
+{{- $serviceName := include "fullname" . -}}
+{{- $servicePort := .Values.service.externalPort -}}
+apiVersion: extensions/v1beta1
+kind: Ingress
+metadata:
+ name: {{ template "fullname" . }}
+ labels:
+ app: {{ template "name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ {{- range $key, $value := .Values.ingress.annotations }}
+ {{ $key }}: {{ $value | quote }}
+ {{- end }}
+spec:
+ rules:
+ {{- range $host := .Values.ingress.hosts }}
+ - host: {{ $host }}
+ http:
+ paths:
+ - path: /
+ backend:
+ serviceName: {{ $serviceName }}
+ servicePort: {{ $servicePort }}
+ {{- end -}}
+ {{- if .Values.ingress.tls }}
+ tls:
+{{ toYaml .Values.ingress.tls | indent 4 }}
+ {{- end -}}
+{{- end -}}
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
global:
nodePortPrefix: 302
+ commonConfigPrefix: netbox
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
#################################################################
# Application configuration defaults.
#################################################################
# application image
-repository: nexus3.onap.org:10001
-image: onap/sdc/sdc-workflow-designer:1.1.0
+repository: hub.docker.io
pullPolicy: Always
-# flag to enable debugging - application support required
-debugEnabled: false
-
# default number of instances
replicaCount: 1
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- type: NodePort
- name: sdc-wfd
- portName: sdc-wfd
- nodePort: "56"
- internalPort: 8080
+nodeSelector: {}
+affinity: {}
ingress:
enabled: false
+resources: {}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+netbox:
+ enabled: true
\ No newline at end of file
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
dependencies:
- name: common
version: ~2.0.0
- repository: '@local'
\ No newline at end of file
+ repository: '@local'
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#============LICENSE_START========================================================
#=================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#!/bin/bash
# ================================================================================
# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
dependencies:
- name: common
version: ~2.0.0
# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Service Dependencies
message-router depends on AAF
-dbc-api depends on AAF and Postgresql.
\ No newline at end of file
+dbc-api depends on AAF and Postgresql.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
# Helm Chart for ONAP DMaaP Applications
ONAP includes the following Kubernetes services available in ONAP Beijing Release (more expected in future):
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
DMAAPBC_WAIT_TO_EXIT=Y
DMAAPBC_PG_ENABLED=true
# Need to connect to PG primary service, designated by service.name2
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{- end}}
selector:
app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
\ No newline at end of file
+ release: {{ .Release.Name }}
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/dmaap/dmaap-mr:1.1.4
+image: onap/dmaap/dmaap-mr:1.1.5
pullPolicy: Always
kafka:
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
+ serviceAccountName: msb
initContainers:
- command:
- /root/ready.py
repository: nexus3.onap.org:10001
image: onap/oom/kube2msb:1.1.0
pullPolicy: Always
+istioSidecar: true
# application configuration
config:
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
+ serviceAccountName: msb
containers:
- name: {{ include "common.name" . }}
image: "{{ .Values.global.dockerHubRepository | default .Values.dockerHubRepository }}/{{ .Values.image }}"
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{- end}}
selector:
app: {{ include "common.name" . }}
dockerHubRepository: registry.hub.docker.com
image: library/consul:0.9.3
pullPolicy: Always
+istioSidecar: true
# application configuration
config: {}
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<configuration debug="true" scan="true" scanPeriod="3 seconds">
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="msb" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="discovery" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
\ No newline at end of file
--- /dev/null
+<configuration scan="false" debug="true">
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+
+ <property name="logDir" value="/var/log/onap" />
+ <property name="debugDir" value="/var/log/onap" />
+
+ <property name="componentName" value="msb"></property>
+ <property name="subComponentName" value="msb-discovery"></property>
+
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property name="debugPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+
+ <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
+ <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+ <property name="debugLogDirectory" value="${debugDir}/${componentName}/${subComponentName}" />
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${metricPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFError"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>${errorPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFError"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${debugLogDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${debugLogDirectory}/${debugLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <logger name="com.att.eelf.error" level="debug" additivity="false">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+
+ <root level="INFO">
+ <appender-ref ref="asyncEELFDebug" />
+ </root>
+
+</configuration>
+
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}
+ name: {{ include "common.fullname" . }}-log
namespace: {{ include "common.namespace" . }}
data:
-{{ tpl (.Files.Glob "resources/config/log/logback.xml").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
\ No newline at end of file
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
+ serviceAccountName: msb
initContainers:
- command:
- /root/ready.py
name: localtime
readOnly: true
- mountPath: /usr/local/discover-works/logs
- name: msb-discovery-logs
+ name: {{ include "common.fullname" . }}-logs
resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
{{ toYaml .Values.affinity | indent 10 }}
{{- end }}
- # side car containers
- - name: filebeat-onap
+ # Filebeat sidecar container
+ - name: {{ include "common.name" . }}-filebeat-onap
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts:
- - mountPath: /var/log/onap
- name: msb-discovery-logs
- - mountPath: /usr/share/filebeat/data
- name: msb-discovery-filebeat
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap/msb/msb-discovery
+ - mountPath: /opt/ajsc/etc/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
volumes:
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-msb-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
- name: localtime
hostPath:
path: /etc/localtime
- - name: msb-discovery-logs
- emptyDir: {}
- - name: msb-discovery-filebeat
- emptyDir: {}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{- end}}
selector:
app: {{ include "common.name" . }}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_discovery:1.1.0
+image: onap/msb/msb_discovery:1.2.0-SNAPSHOT-latest
pullPolicy: Always
+istioSidecar: true
# application configuration
config: {}
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<configuration debug="true" scan="true" scanPeriod="3 seconds">
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="msb" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="discovery" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
\ No newline at end of file
--- /dev/null
+<configuration scan="false" debug="true">
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+
+ <property name="logDir" value="/var/log/onap" />
+ <property name="debugDir" value="/var/log/onap" />
+
+ <property name="componentName" value="msb"></property>
+ <property name="subComponentName" value="msb-eag"></property>
+
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property name="debugPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+
+ <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
+ <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+ <property name="debugLogDirectory" value="${debugDir}/${componentName}/${subComponentName}" />
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${metricPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFError"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>${errorPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFError"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${debugLogDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${debugLogDirectory}/${debugLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <logger name="com.att.eelf.error" level="debug" additivity="false">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+
+ <root level="INFO">
+ <appender-ref ref="asyncEELFDebug" />
+ </root>
+
+</configuration>
+
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}
+ name: {{ include "common.fullname" . }}-log
namespace: {{ include "common.namespace" . }}
data:
-{{ tpl (.Files.Glob "resources/config/log/logback.xml").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
+ serviceAccountName: msb
initContainers:
- command:
- /root/ready.py
name: localtime
readOnly: true
- mountPath: /usr/local/apiroute-works/logs
- name: msb-discovery-logs
+ name: {{ include "common.fullname" . }}-logs
resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts:
- - mountPath: /var/log/onap
- name: msb-discovery-logs
- - mountPath: /usr/share/filebeat/data
- name: msb-discovery-filebeat
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap/msb/msb-eag
+ - mountPath: /opt/ajsc/etc/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
volumes:
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-msb-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
- name: localtime
hostPath:
path: /etc/localtime
- - name: msb-discovery-logs
- emptyDir: {}
- - name: msb-discovery-filebeat
- emptyDir: {}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
- port: {{ .Values.service.externalPortHttps }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePortHttps }}
- name: {{ .Values.service.name }}-https
+ name: https-{{ .Values.service.name }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
- port: {{ .Values.service.externalPortHttps }}
targetPort: {{ .Values.service.internalPortHttps }}
- name: {{ .Values.service.name }}-https
+ name: https-{{ .Values.service.name }}
{{- end}}
selector:
app: {{ include "common.name" . }}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.1.0
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
pullPolicy: Always
+istioSidecar: true
# application configuration
config:
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<configuration debug="true" scan="true" scanPeriod="3 seconds">
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="msb" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="discovery" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
\ No newline at end of file
--- /dev/null
+<configuration scan="false" debug="true">
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+
+ <property name="logDir" value="/var/log/onap" />
+ <property name="debugDir" value="/var/log/onap" />
+
+ <property name="componentName" value="msb"></property>
+ <property name="subComponentName" value="msb-iag"></property>
+
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property name="debugPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+
+ <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
+ <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+ <property name="debugLogDirectory" value="${debugDir}/${componentName}/${subComponentName}" />
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${metricPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFError"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>${errorPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFError"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${debugLogDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${debugLogDirectory}/${debugLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <logger name="com.att.eelf.error" level="debug" additivity="false">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+
+ <root level="INFO">
+ <appender-ref ref="asyncEELFDebug" />
+ </root>
+
+</configuration>
+
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}
+ name: {{ include "common.fullname" . }}-log
namespace: {{ include "common.namespace" . }}
data:
-{{ tpl (.Files.Glob "resources/config/log/logback.xml").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
+ serviceAccountName: msb
initContainers:
- command:
- /root/ready.py
name: localtime
readOnly: true
- mountPath: /usr/local/apiroute-works/logs
- name: msb-discovery-logs
+ name: {{ include "common.fullname" . }}-logs
resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts:
- - mountPath: /var/log/onap
- name: msb-discovery-logs
- - mountPath: /usr/share/filebeat/data
- name: msb-discovery-filebeat
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap/msb/msb-iag
+ - mountPath: /opt/ajsc/etc/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
volumes:
+ - name: {{ include "common.fullname" . }}-log-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-msb-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
- name: localtime
hostPath:
path: /etc/localtime
- - name: msb-discovery-logs
- emptyDir: {}
- - name: msb-discovery-filebeat
- emptyDir: {}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
{{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
- port: {{ .Values.service.externalPortHttps }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePortHttps }}
- name: {{ .Values.service.name }}-https
+ name: https-{{ .Values.service.name }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
- port: {{ .Values.service.externalPortHttps }}
targetPort: {{ .Values.service.internalPortHttps }}
- name: {{ .Values.service.name }}-https
+ name: https-{{ .Values.service.name }}
{{- end}}
selector:
app: {{ include "common.name" . }}
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.1.0
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
pullPolicy: Always
+istioSidecar: true
# application configuration
config:
#List of logstash server ip addresses with port number.
#But, in our case, this will be the loadbalancer IP address.
#For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.logstashServiceName}}:{{.Values.config.logstashPort}}"]
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
#If enable will do load balancing among availabe Logstash, automatically.
loadbalance: true
--- /dev/null
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ .Release.Name }}-msb-filebeat-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada, ZTE
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+ name: msb
+ namespace: {{ include "common.namespace" . }}
+---
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+ name: {{ include "common.namespace" . }}-msb-binding
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+roleRef:
+ apiGroup: rbac.authorization.k8s.io
+ kind: ClusterRole
+ name: cluster-admin
+subjects:
+ - kind: ServiceAccount
+ name: msb
+ namespace: {{ include "common.namespace" . }}
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
name: {{ include "common.name" . }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
containers:
- env:
spec:
ports:
{{if eq .Values.service.type "NodePort" -}}
- - name: {{ .Values.service.name }}
+ - name: http-{{ .Values.service.name }}
port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{- end}}
selector:
app: {{ include "common.name" . }}
image: onap/multicloud/openstack-ocata:1.1.2
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# application configuration
config:
msbgateway: msb-iag
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
name: {{ include "common.name" . }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
containers:
- env:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
httpGet:
successThreshold: {{ .Values.liveness.successThreshold }}
failureThreshold: {{ .Values.liveness.failureThreshold }}
{{ end -}}
-
# side car containers
- image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
spec:
ports:
{{if eq .Values.service.type "NodePort" -}}
- - name: {{ .Values.service.name }}
+ - name: http-{{ .Values.service.name }}
port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{- end}}
selector:
app: {{ include "common.name" . }}
image: onap/multicloud/vio:1.1.2
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# application configuration
config:
msbgateway: msb-iag
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
name: {{ include "common.name" . }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
containers:
- env:
spec:
ports:
{{ if eq .Values.service.type "NodePort" }}
- - name: {{ .Values.service.name }}
+ - name: http-{{ .Values.service.name }}
port: {{ .Values.service.externalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
{{ else }}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: http-{{ .Values.service.name }}
{{ end }}
selector:
app: {{ include "common.name" . }}
image: onap/multicloud/openstack-windriver:1.1.2
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# application configuration
config:
msbgateway: msb-iag
image: onap/multicloud/framework:1.1.2
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# application configuration
config:
msbgateway: msb-iag
sources:
- https://gerrit.onap.org/r/#/admin/projects/
icon: https://wiki.onap.org/download/thumbnails/1015829/onap_704x271%20copy.png?version=1&modificationDate=1488326334000&api=v2
-tillerVersion: "~2.8.2"
+tillerVersion: "~2.9.1"
version: ~2.0.0
repository: '@local'
condition: policy.enabled
+ - name: pomba
+ version: ~2.0.0
+ repository: '@local'
+ condition: pomba.enabled
- name: portal
version: ~2.0.0
repository: '@local'
enabled: false
policy:
enabled: false
+pomba:
+ enabled: false
portal:
enabled: false
robot:
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration overrides.
+#
+# These overrides will affect all helm charts (ie. applications)
+# that are listed below and are 'enabled'.
+#
+#
+# This is specifically for the environments which take time to
+# deploy ONAP. This increase in timeouts prevents restarting of
+# the pods thereby the components will be deployed without error.
+#################################################################
+aaf:
+ aaf-cs:
+ liveness:
+ initialDelaySeconds: 240
+ readiness:
+ initialDelaySeconds: 240
+ aaf-gui:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+ aaf-oauth:
+ liveness:
+ initialDelaySeconds: 300
+ readiness:
+ initialDelaySeconds: 300
+ aaf-service:
+ liveness:
+ initialDelaySeconds: 300
+ readiness:
+ initialDelaySeconds: 300
+aai:
+ aai-champ:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+clamp:
+ liveness:
+ initialDelaySeconds: 60
+ readiness:
+ initialDelaySeconds: 60
+dcaegen2:
+ dcae-cloudify-manager:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+dmaap:
+ dmaap-bus-controller:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+ message-router:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+portal:
+ portal-app:
+ liveness:
+ initialDelaySeconds: 60
+ readiness:
+ initialDelaySeconds: 60
+sdc:
+ sdc-be:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+ sdc-cs:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+ sdc-es:
+ liveness:
+ initialDelaySeconds: 60
+ readiness:
+ initialDelaySeconds: 120
+ sdc-onboarding-be:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+sdnc:
+ liveness:
+ initialDelaySeconds: 60
+ readiness:
+ initialDelaySeconds: 60
+
+ dmaap-listener:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
+ sdnc-ansible-server:
+ readiness:
+ initialDelaySeconds: 120
+ sdnc-portal:
+ readiness:
+ initialDelaySeconds: 120
+ ueb-listener:
+ liveness:
+ initialDelaySeconds: 60
+ readiness:
+ initialDelaySeconds: 60
+
+so:
+ liveness:
+ initialDelaySeconds: 120
+ mariadb:
+ liveness:
+ initialDelaySeconds: 900
+ readiness:
+ initialDelaySeconds: 900
+
+uui:
+ uui-server:
+ liveness:
+ initialDelaySeconds: 120
+ readiness:
+ initialDelaySeconds: 120
openStackVNFTenantId: "1234"
policy:
enabled: true
+pomba:
+ enabled: true
portal:
enabled: true
robot:
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# ONAP
# ================================================================================
# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# ONAP
# ================================================================================
# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright 2018 AT&T Intellectual Property. All rights reserved
+# Modifications Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada, AT&T
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
filebeat.prospectors:
#it is mandatory, in our case it's log
- input_type: log
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
+# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
nameOverride: brmsgw
nexus:
nameOverride: nexus
- policy-apex-pdp:
- nameOverride: policy-apex-pdp
#################################################################
# Application configuration defaults.
nameOverride: brmsgw
nexus:
nameOverride: nexus
-policy-apex-pdp:
- nameOverride: policy-apex-pdp
# flag to enable debugging - application support required
debugEnabled: false
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Post Orchestration Model Based Audit
+name: pomba
+version: 2.0.0
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP POMBA Context Aggregator
+name: pomba-contextaggregator
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+server.port=9529
+server.ssl.key-store=/auth/tomcat_keystore
+server.ssl.key-store-password=onapSecret
+server.ssl.key-password=onapSecret
+
+builders.properties.path=config/builders/
+
+# Transport Configuration
+transport.consume.host=message-router
+transport.consume.port=3904
+transport.consume.topic=POA-AUDIT-INIT
+transport.consume.motsid=motsid@motsid.com
+transport.consume.pass=1234
+transport.consume.consumergroup=audit1
+transport.consume.consumerid=audit1
+transport.consume.timeout=15000
+transport.consume.batchsize=8
+transport.consume.type=HTTPAUTH
+
+transport.publish.host=message-router
+transport.publish.port=3904
+transport.publish.topic=POA-RULE-VALIDATION
+transport.publish.motsid=motsid@motsid.com
+transport.publish.pass=1234
+transport.publish.batchsize=8
+transport.publish.maxage=1000
+transport.publish.delay=1000
+transport.publish.type=HTTPAUTH
+transport.publish.partition=1
+transport.publish.retries=4
+
+event.header.domain=IST3S2
+event.header.source-name=RO
+event.header.event-type=POA-EVENT
+event.header.entity-type=poa-entity
+event.header.top-entity-type=poa-entity
+event.header.topic-name=POA-RULE-VALIDATION
--- /dev/null
+server.host={{ .Values.config.aaiCtxBuilderHost }}
+basicauth.username={{ .Values.config.aaiCtxBuilderUsername }}
+basicauth.password={{ .Values.config.aaiCtxBuilderPassword }}
+server.port=9530
+server.protocol=http
+trust.store.path=/auth/tomcat_keystore
+key.store.path=/auth/aai-client-cert.p12
+key.store.password=70c87528c88dcd9f9c2558d30e817868
+key.store.type=PKCS12
+key.manager.factory.algorithm=SunX509
+security.protocol=TLS
+connection.timeout.ms=15000
+read.timeout.ms=10000
+base.uri=/aaicontextbuilder/service/context
--- /dev/null
+server.host={{ .Values.config.sdcCtxBuilderHost }}
+basicauth.username={{ .Values.config.sdcCtxBuilderUsername }}
+basicauth.password={{ .Values.config.sdcCtxBuilderPassword }}
+server.port=9532
+server.protocol=http
+trust.store.path=/auth/tomcat_keystore
+key.store.path=/auth/aai-client-cert.p12
+key.store.password=70c87528c88dcd9f9c2558d30e817868
+key.store.type=PKCS12
+key.manager.factory.algorithm=SunX509
+security.protocol=TLS
+connection.timeout.ms=15000
+read.timeout.ms=10000
+base.uri=/sdccontextbuilder/service/context
--- /dev/null
+server.host={{ .Values.config.sdncCtxBuilderHost }}
+basicauth.username={{ .Values.config.sdncCtxBuilderUsername }}
+basicauth.password={{ .Values.config.sdncCtxBuilderPassword }}
+server.port=9531
+server.protocol=http
+trust.store.path=/auth/tomcat_keystore
+key.store.path=/auth/aai-client-cert.p12
+key.store.password=70c87528c88dcd9f9c2558d30e817868
+key.store.type=PKCS12
+key.manager.factory.algorithm=SunX509
+security.protocol=TLS
+connection.timeout.ms=15000
+read.timeout.ms=10000
+base.uri=/sdnccontextbuilder/service/context
+
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap-builders
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/builders/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ {{- if .Values.liveness.enabled }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{- end }}
+ {{- if .Values.readiness.enabled }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ {{- end }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+ - mountPath: /opt/app/config/builders
+ name: {{ include "common.fullname" . }}-config-builders
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{- toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{- toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ - name: {{ include "common.fullname" . }}-config-builders
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap-builders
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+image: onap/pomba-context-aggregator:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+ aaiCtxBuilderHost: pomba-aaictxbuilder
+ aaiCtxBuilderUsername: change-me
+ aaiCtxBuilderPassword: change-me
+ sdcCtxBuilderHost: pomba-sdcctxbuilder
+ sdcCtxBuilderUsername: change-me
+ sdcCtxBuilderPassword: change-me
+ sdncCtxBuilderHost: pomba-sdncctxbuilder
+ sdncCtxBuilderUsername: change-me
+ sdncCtxBuilderPassword: change-me
+
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ enabled: false
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ #type: ClusterIP
+ #externalPort: 9529
+ internalPort: 9529
+ #nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP POMBA Elasticsearch
+name: pomba-elasticsearch
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+# ======================== Elasticsearch Configuration =========================
+#
+# NOTE: Elasticsearch comes with reasonable defaults for most settings.
+# Before you set out to tweak and tune the configuration, make sure you
+# understand what are you trying to accomplish and the consequences.
+#
+# The primary way of configuring a node is via this file. This template lists
+# the most important settings you may want to configure for a production cluster.
+#
+# Please consult the documentation for further information on configuration options:
+# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
+#
+# ---------------------------------- Cluster -----------------------------------
+#
+# Name of the Elasticsearch cluster.
+# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
+# The default name is elasticsearch, but you should change it to an appropriate name which describes the
+# purpose of the cluster.
+#
+cluster.name: "pomba-dashboard"
+#
+# The port that other nodes in the cluster should use when communicating with this node.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_port:$transport.publish_port
+#
+# The host address to publish for nodes in the cluster to connect to.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_host:$transport.publish_host
+#
+# ------------------------------------ Node ------------------------------------
+#
+# It is better to provide different meaningfull names fot different elastic nodes.
+# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id.
+# Note that the node id is persisted and does not change when a node restarts
+#
+#node.name: $node.name
+#
+# Add custom attributes to the node:
+#
+#node.attr.rack: r1
+#
+# ----------------------------------- Paths ------------------------------------
+#
+# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
+# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
+# may change & can deal to data loss.
+path.data: /usr/share/elasticsearch/data
+#
+# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
+# as on upgrading Elasticsearch, directory structure may change.
+path.logs: /usr/share/elasticsearch/logs
+#
+# ----------------------------------- Memory -----------------------------------
+#
+# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
+# Lock the memory on startup.
+#
+bootstrap.memory_lock: false
+#
+# Make sure that the heap size is set to about half the memory available
+# on the system and that the owner of the process is allowed to use this
+# limit.
+#
+# Elasticsearch performs poorly when the system is swapping the memory.
+#
+# ---------------------------------- Network -----------------------------------
+#
+# Set the bind address to a specific IP (IPv4 or IPv6):
+# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
+# non-loopback address.
+network.host: 0.0.0.0
+#
+# Set a custom port for HTTP: If required, default is 9200-9300
+#
+#http.port: $http.port
+#
+# For more information, consult the network module documentation.
+#
+# --------------------------------- Discovery ----------------------------------
+#
+# Pass an initial list of hosts to perform discovery when new node is started
+# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
+# that are likely to be live and contactable.
+# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
+# to connect to other nodes running on the same server.
+#
+#$discovery.zen.ping.unicast.hosts
+#
+# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes
+# available. Only then will an election take place.
+# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
+discovery.zen.minimum_master_nodes: 1
+#
+# For more information, consult the zen discovery module documentation.
+#
+# ---------------------------------- Gateway -----------------------------------
+#
+# Block initial recovery after a full cluster restart until N nodes are started:
+#
+#gateway.recover_after_nodes: 3
+#
+# For more information, consult the gateway module documentation.
+#
+# ---------------------------------- Various -----------------------------------
+#
+# Require explicit names when deleting indices:
+#
+#action.destructive_requires_name: true
+# Set a custom port for HTTP: If required, default is 9200-9300
+# This is used for REST APIs
+http.port: {{.Values.service.externalPort}}
+# Port to bind for communication between nodes. Accepts a single value or a range.
+# If a range is specified, the node will bind to the first available port in the range.
+# Defaults to 9300-9400.
+# More info:
+transport.tcp.port: {{.Values.service.externalPort2}}
+
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /bin/sh
+ - -c
+ - |
+ sysctl -w vm.max_map_count=262144
+ mkdir -p /logroot/elasticsearch/logs
+ mkdir -p /logroot/elasticsearch/data
+ chmod -R 777 /logroot/elasticsearch
+ chown -R root:root /logroot
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ securityContext:
+ privileged: true
+ image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: init-sysctl
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /logroot/
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.name2 }}
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort2 }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+ name: {{ include "common.fullname" . }}-config
+ subPath: elasticsearch.yml
+ - mountPath: /usr/share/elasticsearch/data/
+ name: {{ include "common.fullname" . }}-data
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ items:
+ - key: elasticsearch.yml
+ path: elasticsearch.yml
+ - name: {{ include "common.fullname" . }}-data
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ - name: {{ include "common.fullname" . }}-logs
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPathLogs }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
--- /dev/null
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- end -}}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name2 }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type2 }}
+ ports:
+ {{if eq .Values.service.type2 "NodePort" -}}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.name2 }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.name2 }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: elasticsearch/elasticsearch:6.3.1
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ accessMode: ReadWriteMany
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: pomba/elasticsearch/data
+ mountSubPathLogs: pomba
+
+service:
+ type: ClusterIP
+ name: pomba-es
+ externalPort: 9200
+ internalPort: 9200
+ type2: ClusterIP
+ name2: pomba-es-tcp
+ externalPort2: 9300
+ internalPort2: 9300
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
# limitations under the License.
apiVersion: v1
-description: ONAP Activity Spec WebService
-name: sdc-act
-version: 2.0.0
\ No newline at end of file
+description: ONAP POMBA Kibana
+name: pomba-kibana
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+{".kibana":{"mappings":{"doc":{"dynamic":"strict","properties":{"config":{"dynamic":"true","properties":{"buildNum":{"type":"keyword"},"defaultIndex":{"type":"text","fields":{"keyword":{"type":"keyword","ignore_above":256}}},"telemetry:optIn":{"type":"boolean"}}},"dashboard":{"properties":{"description":{"type":"text"},"hits":{"type":"integer"},"kibanaSavedObjectMeta":{"properties":{"searchSourceJSON":{"type":"text"}}},"optionsJSON":{"type":"text"},"panelsJSON":{"type":"text"},"refreshInterval":{"properties":{"display":{"type":"keyword"},"pause":{"type":"boolean"},"section":{"type":"integer"},"value":{"type":"integer"}}},"timeFrom":{"type":"keyword"},"timeRestore":{"type":"boolean"},"timeTo":{"type":"keyword"},"title":{"type":"text"},"uiStateJSON":{"type":"text"},"version":{"type":"integer"}}},"index-pattern":{"properties":{"fieldFormatMap":{"type":"text"},"fields":{"type":"text"},"intervalName":{"type":"keyword"},"notExpandable":{"type":"boolean"},"sourceFilters":{"type":"text"},"timeFieldName":{"type":"keyword"},"title":{"type":"text"}}},"search":{"properties":{"columns":{"type":"keyword"},"description":{"type":"text"},"hits":{"type":"integer"},"kibanaSavedObjectMeta":{"properties":{"searchSourceJSON":{"type":"text"}}},"sort":{"type":"keyword"},"title":{"type":"text"},"version":{"type":"integer"}}},"server":{"properties":{"uuid":{"type":"keyword"}}},"timelion-sheet":{"properties":{"description":{"type":"text"},"hits":{"type":"integer"},"kibanaSavedObjectMeta":{"properties":{"searchSourceJSON":{"type":"text"}}},"timelion_chart_height":{"type":"integer"},"timelion_columns":{"type":"integer"},"timelion_interval":{"type":"keyword"},"timelion_other_interval":{"type":"keyword"},"timelion_rows":{"type":"integer"},"timelion_sheet":{"type":"text"},"title":{"type":"text"},"version":{"type":"integer"}}},"type":{"type":"keyword"},"updated_at":{"type":"date"},"url":{"properties":{"accessCount":{"type":"long"},"accessDate":{"type":"date"},"createDate":{"type":"date"},"url":{"type":"text","fields":{"keyword":{"type":"keyword","ignore_above":2048}}}}},"visualization":{"properties":{"description":{"type":"text"},"kibanaSavedObjectMeta":{"properties":{"searchSourceJSON":{"type":"text"}}},"savedSearchId":{"type":"keyword"},"title":{"type":"text"},"uiStateJSON":{"type":"text"},"version":{"type":"integer"},"visState":{"type":"text"}}}}}}}}
--- /dev/null
+{"_index":".kibana","_type":"doc","_id":"index-pattern:f4978470-8fa0-11e8-bf59-199e245501e4","_score":1,"_source":{"type":"index-pattern","updated_at":"2018-07-25T00:23:33.543Z","index-pattern":{"title":"service-viol*","timeFieldName":"violationTimestamp","fields":"[{\"name\":\"_id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"_index\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"_score\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":false,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_source\",\"type\":\"_source\",\"count\":0,\"scripted\":false,\"searchable\":false,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"category\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"message\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"modelInvariantId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"modelVersionId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"serviceInstanceId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"severity\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"validationId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"validationRule\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"validationTimestamp\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violationId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violationTimestamp\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violationType\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false}]"}}}
+{"_index":".kibana","_type":"doc","_id":"dashboard:Audit-Dashboard","_score":1,"_source":{"type":"dashboard","updated_at":"2018-07-25T01:08:47.377Z","dashboard":{"title":"Audit Dashboard","hits":0,"description":"","panelsJSON":"[{\"id\":\"Count-Visualization\",\"type\":\"visualization\",\"panelIndex\":1,\"size_x\":12,\"size_y\":3,\"col\":1,\"row\":1},{\"id\":\"Validation-Records\",\"type\":\"search\",\"panelIndex\":2,\"size_x\":12,\"size_y\":5,\"col\":1,\"row\":4,\"columns\":[\"validationId\",\"modelInvariantId\",\"serviceInstanceId\",\"result\"],\"sort\":[\"validationTimestamp\",\"desc\"]}]","optionsJSON":"{\"darkTheme\":false}","uiStateJSON":"{}","version":1,"timeRestore":true,"timeTo":"now","timeFrom":"now-30d","kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[{\"query\":{\"query_string\":{\"query\":\"*\",\"analyze_wildcard\":true}}}]}"}}}}
+{"_index":".kibana","_type":"doc","_id":"search:test","_score":1,"_source":{"type":"search","updated_at":"2018-07-25T01:12:03.481Z","search":{"title":"test","description":"","hits":0,"columns":["serviceInstanceId","validationId"],"sort":["validationTimestamp","desc"],"version":1,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"2fa1bf80-8fa7-11e8-b5d4-cb06e6cca380\",\"query\":{\"query\":{\"query_string\":{\"analyze_wildcard\":true,\"query\":\"*\"}},\"language\":\"lucene\"},\"filter\":[],\"highlight\":{\"pre_tags\":[\"@kibana-highlighted-field@\"],\"post_tags\":[\"@/kibana-highlighted-field@\"],\"fields\":{\"*\":{}},\"require_field_match\":false,\"fragment_size\":2147483647}}"}}}}
+{"_index":".kibana","_type":"doc","_id":"visualization:Violations-Over-Time","_score":1,"_source":{"type":"visualization","updated_at":"2018-07-25T01:08:47.645Z","visualization":{"title":"Violations Over Time","visState":"{\"title\":\"Violations Over Time\",\"type\":\"histogram\",\"params\":{\"shareYAxis\":true,\"addTooltip\":true,\"addLegend\":true,\"scale\":\"linear\",\"mode\":\"stacked\",\"times\":[],\"addTimeMarker\":false,\"defaultYExtents\":false,\"setYExtents\":false,\"yAxis\":{}},\"aggs\":[{\"id\":\"1\",\"type\":\"count\",\"schema\":\"metric\",\"params\":{\"customLabel\":\"Violation Events\"}},{\"id\":\"2\",\"type\":\"date_histogram\",\"schema\":\"segment\",\"params\":{\"field\":\"violationTimestamp\",\"interval\":\"auto\",\"customInterval\":\"2h\",\"min_doc_count\":1,\"extended_bounds\":{}}}],\"listeners\":{}}","uiStateJSON":"{}","description":"","savedSearchId":"Violation-Search","version":1,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[]}"}}}}
+{"_index":".kibana","_type":"doc","_id":"dashboard:Audit-Violations-Dashboard","_score":1,"_source":{"type":"dashboard","updated_at":"2018-07-25T01:08:47.382Z","dashboard":{"title":"Audit Violations Dashboard","hits":0,"description":"","panelsJSON":"[{\"id\":\"Violations-Over-Time\",\"type\":\"visualization\",\"panelIndex\":1,\"size_x\":12,\"size_y\":3,\"col\":1,\"row\":1},{\"id\":\"Violation-Search\",\"type\":\"search\",\"panelIndex\":2,\"size_x\":12,\"size_y\":5,\"col\":1,\"row\":4,\"columns\":[\"validationId\",\"violationId\",\"violationType\",\"message\",\"severity\"],\"sort\":[\"validationTimestamp\",\"desc\"]}]","optionsJSON":"{\"darkTheme\":false}","uiStateJSON":"{}","version":1,"timeRestore":false,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"filter\":[{\"query\":{\"query_string\":{\"query\":\"*\",\"analyze_wildcard\":true}}}]}"}}}}
+{"_index":".kibana","_type":"doc","_id":"visualization:Count-Visualization","_score":1,"_source":{"type":"visualization","updated_at":"2018-07-25T01:12:03.484Z","visualization":{"title":"Validations Over Time","visState":"{\"aggs\":[{\"id\":\"1\",\"params\":{\"customLabel\":\"Validation Events\"},\"schema\":\"metric\",\"type\":\"count\"},{\"id\":\"2\",\"params\":{\"customInterval\":\"2h\",\"customLabel\":\"\",\"extended_bounds\":{},\"field\":\"validationTimestamp\",\"interval\":\"auto\",\"min_doc_count\":1},\"schema\":\"segment\",\"type\":\"date_histogram\"}],\"listeners\":{},\"params\":{\"addLegend\":true,\"addTimeMarker\":false,\"addTooltip\":true,\"defaultYExtents\":false,\"mode\":\"stacked\",\"scale\":\"linear\",\"setYExtents\":false,\"shareYAxis\":true,\"times\":[],\"yAxis\":{}},\"title\":\"Count Visualization\",\"type\":\"histogram\"}","uiStateJSON":"{}","description":"","version":1,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"2fa1bf80-8fa7-11e8-b5d4-cb06e6cca380\",\"query\":{\"query\":{\"query_string\":{\"analyze_wildcard\":true,\"query\":\"*\"}},\"language\":\"lucene\"},\"filter\":[]}"}}}}
+{"_index":".kibana","_type":"doc","_id":"config:6.3.1","_score":1,"_source":{"type":"config","updated_at":"2018-07-25T00:25:06.654Z","config":{"buildNum":17276,"defaultIndex":"f4978470-8fa0-11e8-bf59-199e245501e4","telemetry:optIn":false}}}
+{"_index":".kibana","_type":"doc","_id":"search:Validation-Records","_score":1,"_source":{"type":"search","updated_at":"2018-07-25T01:12:03.478Z","search":{"title":"Validation Records","description":"","hits":0,"columns":["validationId","modelInvariantId","serviceInstanceId","result"],"sort":["validationTimestamp","desc"],"version":1,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"2fa1bf80-8fa7-11e8-b5d4-cb06e6cca380\",\"query\":{\"query\":{\"query_string\":{\"analyze_wildcard\":true,\"query\":\"*\"}},\"language\":\"lucene\"},\"filter\":[],\"highlight\":{\"pre_tags\":[\"@kibana-highlighted-field@\"],\"post_tags\":[\"@/kibana-highlighted-field@\"],\"fields\":{\"*\":{}},\"require_field_match\":false,\"fragment_size\":2147483647}}"}}}}
+{"_index":".kibana","_type":"doc","_id":"search:Main-View","_score":1,"_source":{"type":"search","updated_at":"2018-07-25T01:12:03.480Z","search":{"title":"Main View","description":"","hits":0,"columns":["validationId","modelInvariantId","serviceInstanceId","result"],"sort":["validationTimestamp","desc"],"version":1,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"2fa1bf80-8fa7-11e8-b5d4-cb06e6cca380\",\"query\":{\"query\":{\"query_string\":{\"analyze_wildcard\":true,\"query\":\"*\"}},\"language\":\"lucene\"},\"filter\":[],\"highlight\":{\"pre_tags\":[\"@kibana-highlighted-field@\"],\"post_tags\":[\"@/kibana-highlighted-field@\"],\"fields\":{\"*\":{}},\"require_field_match\":false,\"fragment_size\":2147483647}}"}}}}
+{"_index":".kibana","_type":"doc","_id":"index-pattern:2fa1bf80-8fa7-11e8-b5d4-cb06e6cca380","_score":1,"_source":{"type":"index-pattern","updated_at":"2018-07-25T01:08:06.474Z","index-pattern":{"title":"service-validations*","timeFieldName":"validationTimestamp","fields":"[{\"name\":\"_id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"_index\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"_score\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":false,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_source\",\"type\":\"_source\",\"count\":0,\"scripted\":false,\"searchable\":false,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"_type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":false},{\"name\":\"modelInvariantId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"modelName\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"modelVersionId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"result\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"serviceInstanceId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"validationId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"validationTimestamp\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violations.category\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.errorMessage\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.modelName\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.severity\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.validationRule\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*]-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*]-type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].invariant-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].nf-naming-code\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].uuid\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].vf-module-list.invariant-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].vf-module-list.max-instances\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].vf-module-list.min-instances\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].vf-module-list.uuid\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].vnfc-list.name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf-list[*].vnfc-list.nfc-naming-code\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf[*]-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-aai-vf[*]-type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-service-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].invariant-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].uuid\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vf-module-list.invariant-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vf-module-list.max-instances\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vf-module-list.min-instances\",\"type\":\"number\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vf-module-list.uuid\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vnfc-list.invariant-id\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vnfc-list.name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vnfc-list.nfc-naming-code\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdc-vf-list[*].vnfc-list.uuid\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdnc-vf-list[*]-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdnc-vf-list[*]-type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdnc-vf[*]-name\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationDetails.context-list-sdnc-vf[*]-type\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationId\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false},{\"name\":\"violations.violationTimestamp\",\"type\":\"date\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":true,\"readFromDocValues\":true},{\"name\":\"violations.violationType\",\"type\":\"string\",\"count\":0,\"scripted\":false,\"searchable\":true,\"aggregatable\":false,\"readFromDocValues\":false}]"}}}
+{"_index":".kibana","_type":"doc","_id":"search:Violation-Search","_score":1,"_source":{"type":"search","updated_at":"2018-07-25T01:12:03.486Z","search":{"title":"Violation Search","description":"","hits":0,"columns":["validationId","violationId","violationType","message","severity"],"sort":["validationTimestamp","desc"],"version":1,"kibanaSavedObjectMeta":{"searchSourceJSON":"{\"index\":\"f4978470-8fa0-11e8-bf59-199e245501e4\",\"query\":{\"query\":{\"query_string\":{\"analyze_wildcard\":true,\"query\":\"*\"}},\"language\":\"lucene\"},\"filter\":[],\"highlight\":{\"pre_tags\":[\"@kibana-highlighted-field@\"],\"post_tags\":[\"@/kibana-highlighted-field@\"],\"fields\":{\"*\":{}},\"require_field_match\":false,\"fragment_size\":2147483647}}"}}}}
--- /dev/null
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+xpack.reporting.enabled: false
+#Set to false to disable X-Pack reporting features.
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
+# Kibana is served by a back end server. This setting specifies the port to use.
+server.port: {{.Values.service.externalPort}}
+
+# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
+# The default is 'localhost', which usually means remote machines will not be able to connect.
+# To allow connections from remote users, set this parameter to a non-loopback address.
+server.host: "0"
+
+# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
+# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
+# to Kibana. This setting cannot end in a slash.
+#server.basePath: ""
+
+# The maximum payload size in bytes for incoming server requests.
+#server.maxPayloadBytes: 1048576
+
+# The Kibana server's name. This is used for display purposes.
+server.name: "POMBA Reports"
+
+# The URL of the Elasticsearch instance to use for all your queries.
+elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"
+# When this setting's value is true Kibana uses the hostname specified in the server.host
+# setting. When the value of this setting is false, Kibana uses the hostname of the host
+# that connects to this Kibana instance.
+#elasticsearch.preserveHost: true
+
+# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
+# dashboards. Kibana creates a new index if the index doesn't already exist.
+#kibana.index: ".kibana"
+
+# The default application to load.
+#kibana.defaultAppId: "discover"
+
+# If your Elasticsearch is protected with basic authentication, these settings provide
+# the username and password that the Kibana server uses to perform maintenance on the Kibana
+# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
+# is proxied through the Kibana server.
+elasticsearch.username: "elastic"
+elasticsearch.password: "changeme"
+# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
+# These settings enable SSL for outgoing requests from the Kibana server to the browser.
+#server.ssl.enabled: $server_ssl_enabled
+#server.ssl.certificate: $server_ssl_certificate
+#server.ssl.key: $server_ssl_key
+
+# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
+# These files validate that your Elasticsearch backend uses the same key files.
+#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
+#elasticsearch.ssl.key: $elasticsearch_ssl_key
+
+# Optional setting that enables you to specify a path to the PEM file for the certificate
+# authority for your Elasticsearch instance.
+#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities
+
+# To disregard the validity of SSL certificates, change this setting's value to 'none'.
+#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode
+
+# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
+# the elasticsearch.requestTimeout setting.
+#elasticsearch.pingTimeout: 1500
+
+# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
+# must be a positive integer.
+#elasticsearch.requestTimeout: 30000
+
+# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
+# headers, set this value to [] (an empty list).
+#elasticsearch.requestHeadersWhitelist: [ authorization ]
+
+# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
+# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
+#elasticsearch.customHeaders: {}
+
+# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
+#elasticsearch.shardTimeout: 0
+
+# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
+#elasticsearch.startupTimeout: 5000
+
+# Specifies the path where Kibana creates the process ID file.
+#pid.file: /var/run/kibana.pid
+
+# Enables you specify a file where Kibana stores log output.
+#logging.dest: stdout
+
+# Set the value of this setting to true to suppress all logging output.
+#logging.silent: false
+
+# Set the value of this setting to true to suppress all logging output other than error messages.
+#logging.quiet: false
+
+# Set the value of this setting to true to log all events, including system usage information
+# and all requests.
+#logging.verbose: false
+
+# Set the interval in milliseconds to sample system and process performance
+# metrics. Minimum is 100ms. Defaults to 5000.
+#ops.interval: 5000
+
+# The default locale. This locale can be used in certain circumstances to substitute any missing
+# translations.
+#i18n.defaultLocale: "en"
--- /dev/null
+{"service-validations":{"mappings":{"_doc":{"properties":{"modelInvariantId":{"type":"text"},"modelName":{"type":"text"},"modelVersionId":{"type":"text"},"result":{"type":"text"},"serviceInstanceId":{"type":"text"},"validationId":{"type":"text"},"validationTimestamp":{"type":"date","format":"MMM d y HH:m:s||dd-MM-yyyy HH:mm:ss||yyyy-MM-dd'T'HH:mm:ss.SSSZZ||MM/dd/yyyy||yyyyMMdd'T'HHmmssZ"},"violations":{"type":"nested","properties":{"category":{"type":"text"},"errorMessage":{"type":"text"},"modelName":{"type":"text"},"severity":{"type":"text"},"validationRule":{"type":"text"},"violationDetails":{"properties":{"context-list-aai-vf-list[*]":{"properties":{"invariant-id":{"type":"text"},"name":{"type":"text"},"nf-naming-code":{"type":"text"},"type":{"type":"text"},"uuid":{"type":"text"},"vf-module-list":{"properties":{"invariant-id":{"type":"text"},"max-instances":{"type":"long"},"min-instances":{"type":"long"},"uuid":{"type":"text"}}},"vnfc-list":{"properties":{"name":{"type":"text"},"nfc-naming-code":{"type":"text"}}}}},"context-list-aai-vf-list[*]-name":{"type":"text"},"context-list-aai-vf-list[*]-type":{"type":"text"},"context-list-aai-vf[*]-name":{"type":"text"},"context-list-aai-vf[*]-type":{"type":"text"},"context-list-sdc-service-name":{"type":"text"},"context-list-sdc-vf-list[*]":{"properties":{"invariant-id":{"type":"text"},"name":{"type":"text"},"type":{"type":"text"},"uuid":{"type":"text"},"vf-module-list":{"properties":{"invariant-id":{"type":"text"},"max-instances":{"type":"long"},"min-instances":{"type":"long"},"uuid":{"type":"text"}}},"vnfc-list":{"properties":{"invariant-id":{"type":"text"},"name":{"type":"text"},"nfc-naming-code":{"type":"text"},"uuid":{"type":"text"}}}}},"context-list-sdnc-vf-list[*]-name":{"type":"text"},"context-list-sdnc-vf-list[*]-type":{"type":"text"},"context-list-sdnc-vf[*]-name":{"type":"text"},"context-list-sdnc-vf[*]-type":{"type":"text"}}},"violationId":{"type":"text"},"violationTimestamp":{"type":"date","format":"MMM d y HH:m:s||dd-MM-yyyy HH:mm:ss||yyyy-MM-dd'T'HH:mm:ss.SSSZZ||MM/dd/yyyy||yyyyMMdd'T'HHmmssZ"},"violationType":{"type":"text"}}}}}}}}
--- /dev/null
+{"service-violations":{"mappings":{"_doc":{"properties":{"category":{"type":"text"},"message":{"type":"text"},"modelInvariantId":{"type":"text"},"modelVersionId":{"type":"text"},"serviceInstanceId":{"type":"text"},"severity":{"type":"text"},"validationId":{"type":"text"},"validationRule":{"type":"text"},"validationTimestamp":{"type":"date","format":"MMM d y HH:m:s||dd-MM-yyyy HH:mm:ss||yyyy-MM-dd'T'HH:mm:ss.SSSZZ||MM/dd/yyyy||yyyyMMdd'T'HHmmssZ"},"violationId":{"type":"text"},"violationTimestamp":{"type":"date","format":"MMM d y HH:m:s||dd-MM-yyyy HH:mm:ss||yyyy-MM-dd'T'HH:mm:ss.SSSZZ||MM/dd/yyyy||yyyyMMdd'T'HHmmssZ"},"violationType":{"type":"text"}}}}}}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - pomba-elasticsearch
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ - args:
+ - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/.kibana
+ - --input=/config/default-mapping.json
+ - --type=mapping
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.configRepository }}/{{ .Values.configImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-config-map
+ volumeMounts:
+ - mountPath: /config/default-mapping.json
+ name: {{ include "common.fullname" . }}
+ subPath: default-mapping.json
+ - args:
+ - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/.kibana
+ - --input=/config/default.json
+ - --type=data
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.configRepository }}/{{ .Values.configImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-config
+ volumeMounts:
+ - mountPath: /config/default.json
+ name: {{ include "common.fullname" . }}
+ subPath: default.json
+ - args:
+ - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/service-validations
+ - --input=/config/validationsDump.json
+ - --type=mapping
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.configRepository }}/{{ .Values.configImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-config-validation
+ volumeMounts:
+ - mountPath: /config/validationsDump.json
+ name: {{ include "common.fullname" . }}
+ subPath: validationsDump.json
+ - args:
+ - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/service-violations
+ - --input=/config/violationsDump.json
+ - --type=mapping
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.configRepository }}/{{ .Values.configImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-config-violation
+ volumeMounts:
+ - mountPath: /config/violationsDump.json
+ name: {{ include "common.fullname" . }}
+ subPath: violationsDump.json
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ readinessProbe:
+ httpGet:
+ path: "/"
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ timeoutSeconds: {{ .Values.readiness.timeoutSeconds }}
+# disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ httpGet:
+ path: "/"
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
+ {{ end -}}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /usr/share/kibana/config/
+ name: {{ include "common.fullname" . }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}
+ configMap:
+ name: {{ include "common.fullname" . }}
+ items:
+ - key: kibana.yml
+ path: kibana.yml
+ - key: default.json
+ path: default.json
+ - key: validationsDump.json
+ path: validationsDump.json
+ - key: violationsDump.json
+ path: violationsDump.json
+ - key: default-mapping.json
+ path: default-mapping.json
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# Configuration image
+configRepository: docker.io
+configImage: taskrabbit/elasticsearch-dump
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: kibana/kibana:6.3.1
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+ elasticsearchServiceName: pomba-es
+ elasticsearchPort: 9200
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 300
+ periodSeconds: 10
+ timeoutSeconds: 1
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 300
+ periodSeconds: 10
+ timeoutSeconds: 1
+
+service:
+ #Example service definition with external, internal and node ports.
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: NodePort
+ name: pomba-kibana
+ externalPort: 5601
+ internalPort: 5601
+ nodePort: 34
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP POMBA SDC Context Builder
+name: pomba-sdcctxbuilder
+version: 2.0.0
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
\ No newline at end of file
--- /dev/null
+This directory contains all external configuration files that
+need to be mounted into an application container.
+
+See the configmap.yaml in the templates directory for an example
+of how to load (ie map) config files from this directory, into
+Kubernetes, for distribution within the k8s cluster.
+
+See deployment.yaml in the templates directory for an example
+of how the 'config mapped' files are then mounted into the
+containers.
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+spring.jersey.type=filter
+spring.mvc.urls=swagger,docs,prometheus,auditevents,info,heapdump,autoconfig,beans,loggers,dump,env,trace,health,configprops,mappings,metrics,webjars
+
+server.contextPath=/sdccontextbuilder
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#This property is used to set the Tomcat connector attributes.developers can define multiple attributes separated by comma
+#tomcat.connector.attributes=allowTrace-true
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#server.port=9191
+
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+#Application properties
+sdcConnect.username={{ .Values.config.sdcUsername }}
+sdcConnect.password={{ .Values.config.sdcPassword }}
+sdcConnect.consumerID={{ .Values.config.sdcConsumerId }}
+sdcConnect.sdcAddress={{ .Values.config.sdcServiceName }}.{{.Release.Namespace}}:{{ .Values.config.sdcPort }}
+
+# Minimum timeout value is 15 seconds; default is 120000s
+sdcConnect.timeout.seconds=12000
+
+# {0} = UUID
+sdc.url.template=/sdc/v1/catalog/services/{0}/toscaModel
+sdc.artifact.type=TOSCA_CSAR
+
+# Intended name for downloaded temporary CSAR files: csar-[UUID].zip
+# Only .zip and .csar are accepted extensions, default is .zip
+sdc.csar.file.prefix=csar-
+sdc.csar.file.suffix=.zip
+
+# HTTP Basic Authorization credentials for Rest Service API
+http.userId={{ .Values.config.sdcCtxBuilderUserId }}
+http.password={{ .Values.config.sdcCtxBuilderPassword }}
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+
+#test.tosca.csar.file=\\config\\toscaModel.csar.zip
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /opt/app/config/application.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application.properties
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repository: nexus3.onap.org:10001
+# readinessRepository: oomk8s
+# readinessImage: readiness-check:2.0.0
+# loggingRepository: docker.elastic.co
+# loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/pomba-sdc-context-builder:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+ #Application properties
+ sdcUsername: pomba
+ sdcPassword: OBF:1uha1uh81w8v1ugi1ugg
+ sdcConsumerId: pomba
+ sdcServiceName: sdc-be
+ sdcPort: 30204
+ # HTTP Basic Authorization credentials for Rest Service API
+ sdcCtxBuilderUserId: admin
+ sdcCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+ # The default service name (exposed in the service.yaml) will be the same
+ # name as the chart. If the service name needs to be overriden (such as
+ # when a subchart is shared), uncomment the value below.
+ #name: <service-name-override>
+
+ #Services may use any combination of ports depending on the 'type' of
+ #service being defined.
+ type: ClusterIP
+ externalPort: 9530
+ internalPort: 8080
+# nodePort: <replace with unused node port suffix eg. 23>
+ # optional port name override - default can be defined in service.yaml
+ #portName: http
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ # local reference to common chart, as it is
+ # a part of this chart's package and will not
+ # be published independently to a repo (at this point)
+ repository: '@local'
--- /dev/null
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+# application configuration
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+
+++ /dev/null
-{{ .Values.config.lightHttpdUsername }}:{{ .Values.config.lightHttpdPassword }}
GLOBAL_AAF_SERVER = "https://aaf-service.{{include "common.namespace" .}}:8100"
GLOBAL_AAF_USERNAME = "demo@people.osaaf.org"
GLOBAL_AAF_PASSWORD = "demo123456!"
-
# aai info - everything is from the private oam network (also called onap private network)
GLOBAL_AAI_SERVER_PROTOCOL = "https"
GLOBAL_AAI_SERVER_PORT = "8443"
GLOBAL_APPC_SERVER = "http://appc.{{include "common.namespace" .}}:"
GLOBAL_APPC_USERNAME = "admin"
GLOBAL_APPC_PASSWORD = "admin"
+GLOBAL_APPC_CDT_SERVER_PROTOCOL = "http"
+GLOBAL_APPC_CDT_SERVER_PORT = "80"
+GLOBAL_APPC_CDT_SERVER = "http://appc-cdt.{{include "common.namespace" .}}:"
+GLOBAL_APPC_CDT_USERNAME = "demo"
# sdc info - everything is from the private oam network (also called onap private network)
GLOBAL_ASDC_SERVER_PROTOCOL = "http"
GLOBAL_ASDC_FE_PORT = "8181"
GLOBAL_DCAE_HEALTH_SERVER_PORT = "80"
GLOBAL_DCAE_USERNAME = "console"
GLOBAL_DCAE_PASSWORD = "ZjJkYjllMjljMTI2M2Iz"
+# DROOL server port and credentials
+GLOBAL_DROOLS_SERVER_PORT = "9696"
+GLOBAL_DROOLS_USERNAME = "@1b3rt"
+GLOBAL_DROOLS_PASSWORD = "31nst31n"
+# Log info
+GLOBAL_LOG_SERVER_PROTOCOL = "http"
+GLOBAL_LOG_ELASTICSEARCH_PORT = "9200"
+GLOBAL_LOG_LOGSTASH_PORT = "9600"
+GLOBAL_LOG_KIBANA_PORT = "5601"
# microservice bus info - everything is from the private oam network (also called onap private network)
GLOBAL_MSB_SERVER_PROTOCOL = "http"
GLOBAL_MSB_SERVER_PORT = "80"
# music info - everything is from the private oam network (also called onap private network)
GLOBAL_MUSIC_SERVER_PROTOCOL = "http"
GLOBAL_MUSIC_SERVER_PORT = "8080"
-# oof
+# oof global info - everything is from the private oam network (also called onap private network)
GLOBAL_OOF_SERVER_PROTOCOL = "http"
+# oof-homing info - everything is from the private oam network (also called onap private network)
GLOBAL_OOF_HOMING_SERVER_PORT = "8091"
+# oof-sniro info - everything is from the private oam network (also called onap private network)
GLOBAL_OOF_SNIRO_SERVER_PORT = "8698"
# openstack info - info to select right info in environment
# packet generate vnf info - everything is from the private oam network (also called onap private network)
# dns info
GLOBAL_DNS_TRAFFIC_DURATION = "600"
# location where heat templates are loaded from
-GLOBAL_HEAT_TEMPLATES_FOLDER = "/share/heat"
-# Log info
-GLOBAL_LOG_SERVER_PROTOCOL = "http"
-GLOBAL_LOG_ELASTICSEARCH_PORT = "9200"
-GLOBAL_LOG_LOGSTASH_PORT = "9600"
-GLOBAL_LOG_KIBANA_PORT = "5601"
+GLOBAL_HEAT_TEMPLATES_FOLDER = "/var/opt/OpenECOMP_ETE/demo/heat"
+++ /dev/null
-#!/bin/bash
-
-#
-# Make vm1_robot config available to robot
-#
-CONFIG=/opt/config
-PROPERTIES=/opt/eteshare/config/vm_properties.py
-GLOBAL_VM_PROPERTIES="# File generated from /opt/config\n#\n"
-HASH="GLOBAL_INJECTED_PROPERTIES={"
-COMMA=""
-for f in `ls $CONFIG/*.txt`;
-do
- VALUE=`cat $f`
- NAME=${f%.*}
- NAME=${NAME##*/}
- NAME=${NAME^^}
- GLOBAL_VM_PROPERTIES=$"${GLOBAL_VM_PROPERTIES}GLOBAL_INJECTED_$NAME = \"$VALUE\"\n"
- HASH=$"${HASH}${COMMA}\n\"GLOBAL_INJECTED_$NAME\" : \"$VALUE\""
- COMMA=","
-done
-HASH="${HASH}}\n"
-GLOBAL_VM_PROPERTIES="${GLOBAL_VM_PROPERTIES}\n${HASH}"
-GLOBAL_VM_PROPERTIES=${GLOBAL_VM_PROPERTIES}
-echo -e $GLOBAL_VM_PROPERTIES > $PROPERTIES
GLOBAL_INJECTED_AAI1_IP_ADDR = "aai.{{include "common.namespace" .}}"
GLOBAL_INJECTED_AAI2_IP_ADDR = "N/A"
GLOBAL_INJECTED_APPC_IP_ADDR = "appc.{{include "common.namespace" .}}"
+GLOBAL_INJECTED_APPC_CDT_IP_ADDR = "appc-cdt.{{include "common.namespace" .}}"
GLOBAL_INJECTED_ARTIFACTS_VERSION = "{{.Values.demoArtifactsVersion}}"
GLOBAL_INJECTED_CLAMP_IP_ADDR = "clamp.{{include "common.namespace" .}}"
GLOBAL_INJECTED_CLI_IP_ADDR = "cli.{{include "common.namespace" .}}"
GLOBAL_INJECTED_DNS_IP_ADDR = "N/A"
GLOBAL_INJECTED_DOCKER_VERSION = "1.2-STAGING-latest"
GLOBAL_INJECTED_EXTERNAL_DNS = "N/A"
-GLOBAL_INJECTED_GERRIT_BRANCH = "2.0.0-ONAP"
GLOBAL_INJECTED_LOG_ELASTICSEARCH_IP_ADDR = "log-es.{{include "common.namespace" .}}"
GLOBAL_INJECTED_LOG_KIBANA_IP_ADDR = "log-kibana.{{include "common.namespace" .}}"
GLOBAL_INJECTED_LOG_LOGSTASH_IP_ADDR = "log-ls-http.{{include "common.namespace" .}}"
GLOBAL_INJECTED_OOF_IP_ADDR = "N/A"
GLOBAL_INJECTED_OOF_HOMING_IP_ADDR = "oof-has-api.{{include "common.namespace" .}}"
GLOBAL_INJECTED_OOF_SNIRO_IP_ADDR = "oof-osdf.{{include "common.namespace" .}}"
-GLOBAL_INJECTED_OPENO_IP_ADDR = "msb-iag.{{include "common.namespace" .}}"
+GLOBAL_INJECTED_MSB_IP_ADDR = "msb-iag.{{include "common.namespace" .}}"
GLOBAL_INJECTED_OPENSTACK_PASSWORD = "{{ .Values.openStackPassword }}"
GLOBAL_INJECTED_OPENSTACK_TENANT_ID = "{{ .Values.openStackTenantId }}"
GLOBAL_INJECTED_OPENSTACK_USERNAME = "{{ .Values.openStackUserName }}"
GLOBAL_INJECTED_PORTAL_IP_ADDR = "portal-app.{{include "common.namespace" .}}"
GLOBAL_INJECTED_PUBLIC_NET_ID = "{{ .Values.openStackPublicNetId }}"
GLOBAL_INJECTED_REGION = "{{ .Values.openStackRegion }}"
-GLOBAL_INJECTED_REMOTE_REPO = "http://gerrit.onap.org/r/testsuite/properties.git"
GLOBAL_INJECTED_SCRIPT_VERSION = "{{ .Values.scriptVersion }}"
GLOBAL_INJECTED_SDC_BE_IP_ADDR = "sdc-be.{{include "common.namespace" .}}"
GLOBAL_INJECTED_SDC_BE_ONBOARD_IP_ADDR = "sdc-onboarding-be.{{include "common.namespace" .}}"
"GLOBAL_INJECTED_AAI1_IP_ADDR" : "aai.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_AAI2_IP_ADDR" : "N/A",
"GLOBAL_INJECTED_APPC_IP_ADDR" : "appc.{{include "common.namespace" .}}",
+ "GLOBAL_INJECTED_APPC_CDT_IP_ADDR" : "appc-cdt.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_ARTIFACTS_VERSION" : "{{.Values.demoArtifactsVersion}}",
"GLOBAL_INJECTED_CLAMP_IP_ADDR" : "clamp.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_CLI_IP_ADDR" : "cli.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_DNS_IP_ADDR" : "N/A",
"GLOBAL_INJECTED_DOCKER_VERSION" : "1.2-STAGING-latest",
"GLOBAL_INJECTED_EXTERNAL_DNS" : "N/A",
- "GLOBAL_INJECTED_GERRIT_BRANCH" : "2.0.0-ONAP",
"GLOBAL_INJECTED_KEYSTONE" : "{{ .Values.openStackKeyStoneUrl }}",
"GLOBAL_INJECTED_LOG_ELASTICSEARCH_IP_ADDR" : "log-es.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_LOG_KIBANA_IP_ADDR" : "log-kibana.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_OOF_IP_ADDR" : "N/A",
"GLOBAL_INJECTED_OOF_HOMING_IP_ADDR" : "oof-has-api.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_OOF_SNIRO_IP_ADDR" : "oof-osdf.{{include "common.namespace" .}}",
- "GLOBAL_INJECTED_OPENO_IP_ADDR" : "msb-iag.{{include "common.namespace" .}}",
+ "GLOBAL_INJECTED_MSB_IP_ADDR" : "msb-iag.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_OPENSTACK_PASSWORD" : "{{ .Values.openStackPassword }}",
"GLOBAL_INJECTED_OPENSTACK_TENANT_ID" : "{{ .Values.openStackTenantId }}",
"GLOBAL_INJECTED_OPENSTACK_USERNAME" : "{{ .Values.openStackUserName }}",
"GLOBAL_INJECTED_PORTAL_IP_ADDR" : "portal-app.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_PUBLIC_NET_ID" : "{{ .Values.openStackPublicNetId }}",
"GLOBAL_INJECTED_REGION" : "{{ .Values.openStackRegion }}",
- "GLOBAL_INJECTED_REMOTE_REPO" : "http://gerrit.onap.org/r/testsuite/properties.git",
"GLOBAL_INJECTED_SDC_BE_IP_ADDR" : "sdc-be.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_SDC_BE_ONBOARD_IP_ADDR" : "sdc-onboarding-be.{{include "common.namespace" .}}",
"GLOBAL_INJECTED_SDC_FE_IP_ADDR" : "sdc-fe.{{include "common.namespace" .}}",
+++ /dev/null
-*** Settings ***
-Documentation The main interface for interacting with OOF: SNIRO and Homing Service
-Library RequestsLibrary
-
-Resource global_properties.robot
-
-*** Variables ***
-${OOF_HOMING_HEALTH_CHECK_PATH} /v1/plans/healthcheck
-${OOF_SNIRO_HEALTH_CHECK_PATH} /api/oof/v1/healthcheck
-
-${OOF_HOMING_ENDPOINT} ${GLOBAL_OOF_SERVER_PROTOCOL}://${GLOBAL_INJECTED_OOF_HOMING_IP_ADDR}:${GLOBAL_OOF_HOMING_SERVER_PORT}
-${OOF_SNIRO_ENDPOINT} ${GLOBAL_OOF_SERVER_PROTOCOL}://${GLOBAL_INJECTED_OOF_SNIRO_IP_ADDR}:${GLOBAL_OOF_SNIRO_SERVER_PORT}
-
-*** Keywords ***
-Run OOF-Homing Health Check
- [Documentation] Runs OOF-Homing Health check
- ${resp}= Run OOF-Homing Get Request ${OOF_HOMING_HEALTH_CHECK_PATH}
- Should Be Equal As Integers ${resp.status_code} 200
-
-Run OOF-Homing Get Request
- [Documentation] Runs OOF-Homing Get request
- [Arguments] ${data_path}
- ${session}= Create Session session ${OOF_HOMING_ENDPOINT}
- ${resp}= Get Request session ${data_path}
- Should Be Equal As Integers ${resp.status_code} 200
- Log Received response from OOF-Homing ${resp.text}
- [Return] ${resp}
-
-Run OOF-SNIRO Health Check
- [Documentation] Runs OOF-SNIRO Health check
- ${resp}= Run OOF-SNIRO Get Request ${OOF_SNIRO_HEALTH_CHECK_PATH}
- Should Be Equal As Integers ${resp.status_code} 200
-
-Run OOF-SNIRO Get Request
- [Documentation] Runs OOF-SNIRO Get request
- [Arguments] ${data_path}
- ${session}= Create Session session ${OOF_SNIRO_ENDPOINT}
- ${resp}= Get Request session ${data_path}
- Should Be Equal As Integers ${resp.status_code} 200
- Log Received response from OOF-SNIRO ${resp.text}
- [Return] ${resp}
+++ /dev/null
-*** Settings ***
-Documentation The main interface for interacting with Policy. It handles low level stuff like managing the http request library and Policy required fields
-Library RequestsClientCert
-Library RequestsLibrary
-Library String
-Library JSONUtils
-Library Collections
-Resource global_properties.robot
-
-*** Variables ***
-${POLICY_HEALTH_CHECK_PATH} /healthcheck
-${POLICY_ENDPOINT} ${GLOBAL_POLICY_SERVER_PROTOCOL}://${GLOBAL_INJECTED_POLICY_IP_ADDR}:${GLOBAL_POLICY_SERVER_PORT}
-${POLICY_HEALTHCHECK_ENDPOINT} ${GLOBAL_POLICY_SERVER_PROTOCOL}://${GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR}:${GLOBAL_POLICY_HEALTHCHECK_PORT}
-
-*** Keywords ***
-
-Run Policy Health Check
- [Documentation] Runs Policy Health check
- ${auth}= Create List ${GLOBAL_POLICY_USERNAME} ${GLOBAL_POLICY_PASSWORD}
- Log Creating session ${POLICY_ENDPOINT}
- ${session}= Create Session policy ${POLICY_HEALTHCHECK_ENDPOINT} auth=${auth}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json
- ${resp}= Get Request policy ${POLICY_HEALTH_CHECK_PATH} headers=${headers}
- Log Received response from policy ${resp.text}
- Should Be Equal As Strings ${resp.status_code} 200
- Should Be True ${resp.json()['healthy']}
- @{ITEMS}= Copy List ${resp.json()['details']}
- :FOR ${ELEMENT} IN @{ITEMS}
- \ Should Be Equal As Strings ${ELEMENT['code']} 200
- \ Should Be True ${ELEMENT['healthy']}
-
-Run Policy Put Request
- [Documentation] Runs Policy Put request
- [Arguments] ${data_path} ${data}
- Log Creating session ${POLICY_ENDPOINT}
- ${session}= Create Session policy ${POLICY_ENDPOINT}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json Authorization=Basic ${GLOBAL_POLICY_AUTH} ClientAuth=${GLOBAL_POLICY_CLIENTAUTH} Environment=TEST
- ${resp}= Put Request policy ${data_path} data=${data} headers=${headers}
- Log Received response from policy ${resp.text}
- [Return] ${resp}
-
-Run Policy Delete Request
- [Documentation] Runs Policy Delete request
- [Arguments] ${data_path} ${data}
- Log Creating session ${POLICY_ENDPOINT}
- ${session}= Create Session policy ${POLICY_ENDPOINT}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json Authorization=Basic ${GLOBAL_POLICY_AUTH} ClientAuth=${GLOBAL_POLICY_CLIENTAUTH} Environment=TEST
- ${resp}= Delete Request policy ${data_path} data=${data} headers=${headers}
- Log Received response from policy ${resp.text}
- [Return] ${resp}
-
-Run Policy Get Configs Request
- [Documentation] Runs Policy Get Configs request
- [Arguments] ${data_path} ${data}
- Log Creating session ${POLICY_ENDPOINT}
- ${session}= Create Session policy ${POLICY_ENDPOINT}
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json Authorization=Basic ${GLOBAL_POLICY_AUTH} ClientAuth=${GLOBAL_POLICY_CLIENTAUTH}
- ${resp}= Post Request policy ${data_path} data=${data} headers=${headers}
- Log Received response from policy ${resp.text}
- [Return] ${resp}
\ No newline at end of file
+++ /dev/null
-*** Settings ***
-Documentation The main interface for interacting with SDN-GC. It handles low level stuff like managing the http request library and SDN-GC required fields
-Library RequestsLibrary
-Library UUID
-Library OperatingSystem
-Library ExtendedSelenium2Library
-Library Collections
-Library String
-Library StringTemplater
-Resource global_properties.robot
-Resource ../resources/json_templater.robot
-Resource browser_setup.robot
-
-Variables ../assets/service_mappings.py
-
-*** Variables ***
-${PRELOAD_VNF_TOPOLOGY_OPERATION_PATH} /operations/VNF-API:preload-vnf-topology-operation
-${PRELOAD_VNF_CONFIG_PATH} /config/VNF-API:preload-vnfs/vnf-preload-list
-${PRELOAD_VNF_TOPOLOGY_OPERATION_BODY} robot/assets/templates/sdnc/
-${SDNGC_INDEX_PATH} /restconf
-${SDNCGC_HEALTHCHECK_OPERATION_PATH} /operations/SLI-API:healthcheck
-${SDNGC_REST_ENDPOINT} ${GLOBAL_SDNGC_SERVER_PROTOCOL}://${GLOBAL_INJECTED_SDNC_IP_ADDR}:${GLOBAL_SDNGC_REST_PORT}
-${SDNGC_ADMIN_ENDPOINT} ${GLOBAL_SDNGC_SERVER_PROTOCOL}://${GLOBAL_INJECTED_SDNC_PORTAL_IP_ADDR}:${GLOBAL_SDNGC_ADMIN_PORT}
-${SDNGC_ADMIN_SIGNUP_URL} ${SDNGC_ADMIN_ENDPOINT}/signup
-${SDNGC_ADMIN_LOGIN_URL} ${SDNGC_ADMIN_ENDPOINT}/login
-${SDNGC_ADMIN_VNF_PROFILE_URL} ${SDNGC_ADMIN_ENDPOINT}/mobility/getVnfProfile
-
-*** Keywords ***
-Run SDNGC Health Check
- [Documentation] Runs an SDNGC healthcheck
- ${resp}= Run SDNGC Post Request ${SDNGC_INDEX PATH}${SDNCGC_HEALTHCHECK_OPERATION_PATH} ${None}
- Should Be Equal As Strings ${resp.status_code} 200
- Should Be Equal As Strings ${resp.json()['output']['response-code']} 200
-
-Run SDNGC Get Request
- [Documentation] Runs an SDNGC get request
- [Arguments] ${data_path}
- ${auth}= Create List ${GLOBAL_SDNGC_USERNAME} ${GLOBAL_SDNGC_PASSWORD}
- Log Creating session ${SDNGC_REST_ENDPOINT}
- ${session}= Create Session sdngc ${SDNGC_REST_ENDPOINT} auth=${auth}
- ${uuid}= Generate UUID
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json X-TransactionId=${GLOBAL_APPLICATION_ID}-${uuid} X-FromAppId=${GLOBAL_APPLICATION_ID}
- ${resp}= Get Request sdngc ${data_path} headers=${headers}
- Log Received response from sdngc ${resp.text}
- [Return] ${resp}
-
-Run SDNGC Put Request
- [Documentation] Runs an SDNGC put request
- [Arguments] ${data_path} ${data}
- ${auth}= Create List ${GLOBAL_SDNGC_USERNAME} ${GLOBAL_SDNGC_PASSWORD}
- Log Creating session ${SDNGC_REST_ENDPOINT}
- ${session}= Create Session sdngc ${SDNGC_REST_ENDPOINT} auth=${auth}
- ${uuid}= Generate UUID
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json X-TransactionId=${GLOBAL_APPLICATION_ID}-${uuid} X-FromAppId=${GLOBAL_APPLICATION_ID}
- ${resp}= Put Request sdngc ${data_path} data=${data} headers=${headers}
- Log Received response from sdngc ${resp.text}
- [Return] ${resp}
-
-Run SDNGC Post Request
- [Documentation] Runs an SDNGC post request
- [Arguments] ${data_path} ${data}
- ${auth}= Create List ${GLOBAL_SDNGC_USERNAME} ${GLOBAL_SDNGC_PASSWORD}
- Log Creating session ${SDNGC_REST_ENDPOINT}
- ${session}= Create Session sdngc ${SDNGC_REST_ENDPOINT} auth=${auth}
- ${uuid}= Generate UUID
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json X-TransactionId=${GLOBAL_APPLICATION_ID}-${uuid} X-FromAppId=${GLOBAL_APPLICATION_ID}
- ${resp}= Post Request sdngc ${data_path} data=${data} headers=${headers}
- Log Received response from sdngc ${resp.text}
- [Return] ${resp}
-
-Run SDNGC Delete Request
- [Documentation] Runs an SDNGC delete request
- [Arguments] ${data_path}
- ${auth}= Create List ${GLOBAL_SDNGC_USERNAME} ${GLOBAL_SDNGC_PASSWORD}
- Log Creating session ${SDNGC_REST_ENDPOINT}
- ${session}= Create Session sdngc ${SDNGC_REST_ENDPOINT} auth=${auth}
- ${uuid}= Generate UUID
- ${headers}= Create Dictionary Accept=application/json Content-Type=application/json X-TransactionId=${GLOBAL_APPLICATION_ID}-${uuid} X-FromAppId=${GLOBAL_APPLICATION_ID}
- ${resp}= Delete Request sdngc ${data_path} headers=${headers}
- Log Received response from sdngc ${resp.text}
- [Return] ${resp}
-
-
-Preload Vnf
- [Arguments] ${service_type_uuid} ${generic_vnf_name} ${generic_vnf_type} ${vf_module_name} ${vf_modules} ${service} ${uuid}
- ${base_vf_module_type}= Catenate
- ${closedloop_vf_module}= Create Dictionary
- ${templates}= Get From Dictionary ${GLOBAL_SERVICE_TEMPLATE_MAPPING} ${service}
- :for ${vf_module} in @{vf_modules}
- \ ${vf_module_type}= Get From Dictionary ${vf_module} name
- \ ${dict} Get From Mapping ${templates} ${vf_module}
- \ ${filename}= Get From Dictionary ${dict} template
- \ ${base_vf_module_type}= Set Variable If '${dict['isBase']}' == 'true' ${vf_module_type} ${base_vf_module_type}
- \ ${closedloop_vf_module}= Set Variable If '${dict['isBase']}' == 'false' ${vf_module} ${closedloop_vf_module}
- \ ${vf_name}= Update Module Name ${dict} ${vf_module_name}
- \ Preload Vnf Profile ${vf_module_type}
- \ Preload One Vnf Topology ${service_type_uuid} ${generic_vnf_name} ${generic_vnf_type} ${vf_name} ${vf_module_type} ${service} ${filename} ${uuid}
- [Return] ${base_vf_module_type} ${closedloop_vf_module}
-
-
-Update Module Name
- [Arguments] ${dict} ${vf_module_name}
- Return From Keyword If 'prefix' not in ${dict} ${vf_module_name}
- Return From Keyword If '${dict['prefix']}' == '' ${vf_module_name}
- ${name}= Replace String ${vf_module_name} Vfmodule_ ${dict['prefix']}
- [Return] ${name}
-
-Get From Mapping
- [Documentation] Retrieve the appropriate prelad template entry for the passed vf_module
- [Arguments] ${templates} ${vf_module}
- ${vf_module_name}= Get From DIctionary ${vf_module} name
- :for ${template} in @{templates}
- \ Return From Keyword If '${template['name_pattern']}' in '${vf_module_name}' ${template}
- [Return] None
-
-Preload One Vnf Topology
- [Arguments] ${service_type_uuid} ${generic_vnf_name} ${generic_vnf_type} ${vf_module_name} ${vf_module_type} ${service} ${filename} ${uuid}
- Return From Keyword If '${filename}' == ''
- ${data_template}= OperatingSystem.Get File ${PRELOAD_VNF_TOPOLOGY_OPERATION_BODY}/preload.template
- ${parameters}= Get Template Parameters ${filename} ${uuid}
- Set To Dictionary ${parameters} generic_vnf_name=${generic_vnf_name} generic_vnf_type=${generic_vnf_type} service_type=${service_type_uuid} vf_module_name=${vf_module_name} vf_module_type=${vf_module_type}
- ${data}= Fill JSON Template ${data_template} ${parameters}
- ${put_resp}= Run SDNGC Post Request ${SDNGC_INDEX_PATH}${PRELOAD_VNF_TOPOLOGY_OPERATION_PATH} ${data}
- Should Be Equal As Strings ${put_resp.json()['output']['response-code']} 200
- ${get_resp}= Run SDNGC Get Request ${SDNGC_INDEX_PATH}${PRELOAD_VNF_CONFIG_PATH}/${vf_module_name}/${vf_module_type}
- Should Be Equal As Strings ${get_resp.status_code} 200
-
-Get Template Parameters
- [Arguments] ${template} ${uuid}
- ${rest} ${suite}= Split String From Right ${SUITE NAME} . 1
- ${uuid}= Catenate ${uuid}
- ${hostid}= Get Substring ${uuid} -4
- ${ecompnet}= Evaluate (${GLOBAL_BUILD_NUMBER}%128)+128
-
-
- # Initialize the value map with the properties generated from the Robot VM /opt/config folder
- ${valuemap}= Copy Dictionary ${GLOBAL_INJECTED_PROPERTIES}
-
- # These should be deprecated by the above....
- Set To Dictionary ${valuemap} artifacts_version=${GLOBAL_INJECTED_ARTIFACTS_VERSION}
- Set To Dictionary ${valuemap} network=${GLOBAL_INJECTED_NETWORK}
- Set To Dictionary ${valuemap} public_net_id=${GLOBAL_INJECTED_PUBLIC_NET_ID}
- Set To Dictionary ${valuemap} cloud_env=${GLOBAL_INJECTED_CLOUD_ENV}
- Set To Dictionary ${valuemap} install_script_version=${GLOBAL_INJECTED_SCRIPT_VERSION}
- Set To Dictionary ${valuemap} vm_image_name=${GLOBAL_INJECTED_VM_IMAGE_NAME}
- Set To Dictionary ${valuemap} vm_flavor_name=${GLOBAL_INJECTED_VM_FLAVOR}
-
-
- # update the value map with unique values.
- Set To Dictionary ${valuemap} uuid=${uuid} hostid=${hostid} ecompnet=${ecompnet}
-
- #
- # Mash together the defaults dict with the test case dict to create the set of
- # preload parameters
- #
- ${suite_templates}= Get From Dictionary ${GLOBAL_PRELOAD_PARAMETERS} ${suite}
- ${template}= Get From Dictionary ${suite_templates} ${template}
- ${defaults}= Get From Dictionary ${GLOBAL_PRELOAD_PARAMETERS} defaults
- # add all of the defaults to template...
- @{keys}= Get Dictionary Keys ${defaults}
- :for ${key} in @{keys}
- \ ${value}= Get From Dictionary ${defaults} ${key}
- \ Set To Dictionary ${template} ${key} ${value}
-
- #
- # Get the vnf_parameters to preload
- #
- ${vnf_parameters}= Resolve VNF Parameters Into Array ${valuemap} ${template}
- ${vnf_parameters_json}= Evaluate json.dumps(${vnf_parameters}) json
- ${parameters}= Create Dictionary vnf_parameters=${vnf_parameters_json}
- [Return] ${parameters}
-
-Resolve Values Into Dictionary
- [Arguments] ${valuemap} ${from} ${to}
- ${keys}= Get Dictionary Keys ${from}
- :for ${key} in @{keys}
- \ ${value}= Get From Dictionary ${from} ${key}
- \ ${value}= Template String ${value} ${valuemap}
- \ Set To Dictionary ${to} ${key} ${value}
-
-Resolve VNF Parameters Into Array
- [Arguments] ${valuemap} ${from}
- ${vnf_parameters}= Create List
- ${keys}= Get Dictionary Keys ${from}
- :for ${key} in @{keys}
- \ ${value}= Get From Dictionary ${from} ${key}
- \ ${value}= Template String ${value} ${valuemap}
- \ ${parameter}= Create Dictionary vnf-parameter-name=${key} vnf-parameter-value=${value}
- \ Append To List ${vnf_parameters} ${parameter}
- [Return] ${vnf_parameters}
-
-Preload Vnf Profile
- [Arguments] ${vnf_name}
- Login To SDNGC Admin GUI
- Go To ${SDNGC_ADMIN_VNF_PROFILE_URL}
- Click Button xpath=//button[@data-target='#add_vnf_profile']
- Input Text xpath=//input[@id='nf_vnf_type'] ${vnf_name}
- Input Text xpath=//input[@id='nf_availability_zone_count'] 999
- Input Text xpath=//input[@id='nf_equipment_role'] robot-ete-test
- Click Button xpath=//button[contains(.,'Submit')]
- Page Should Contain VNF Profile
- Input Text xpath=//div[@id='vnf_profile_filter']//input ${vnf_name}
- Page Should Contain ${vnf_name}
-
-Delete Vnf Profile
- [Arguments] ${vnf_name}
- Login To SDNGC Admin GUI
- Go To ${SDNGC_ADMIN_VNF_PROFILE_URL}
- Page Should Contain VNF Profile
- Input Text xpath=//div[@id='vnf_profile_filter']//input ${vnf_name}
- Page Should Contain ${vnf_name}
- Click Button xpath=//button[contains(@onclick, '${vnf_name}')]
- Page Should Contain Are you sure you want to delete VNF_PROFILE
- Click Button xpath=//button[contains(text(), 'Yes')]
- Page Should Not Contain ${vnf_name}
-
-Login To SDNGC Admin GUI
- [Documentation] Login To SDNGC Admin GUI
- ## Setup Browser is now being managed by the test case
- ## Setup Browser
- Go To ${SDNGC_ADMIN_SIGNUP_URL}
- ##Maximize Browser Window
- Set Selenium Speed ${GLOBAL_SELENIUM_DELAY}
- Set Browser Implicit Wait ${GLOBAL_SELENIUM_BROWSER_IMPLICIT_WAIT}
- Log Logging in to ${SDNGC_ADMIN_LOGIN_URL}
- Handle Proxy Warning
- Title Should Be AdminPortal
- ${uuid}= Generate UUID
- ${shortened_uuid}= Evaluate str("${uuid}")[:12]
- ${email}= Catenate ${shortened_uuid}@robotete.com
- Input Text xpath=//input[@id='nf_email'] ${email}
- Input Password xpath=//input[@id='nf_password'] ${shortened_uuid}
- Click Button xpath=//button[@type='submit']
- Wait Until Page Contains User created 20s
- Go To ${SDNGC_ADMIN_LOGIN_URL}
- Input Text xpath=//input[@id='email'] ${email}
- Input Password xpath=//input[@id='password'] ${shortened_uuid}
- Click Button xpath=//button[@type='submit']
- Title Should Be SDN-C AdminPortal
- Log Logged in to ${SDNGC_ADMIN_LOGIN_URL}
\ No newline at end of file
namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/eteshare/config/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-resources-configmap
- namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/robot/resources/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-lighttpd-authorization-configmap
- namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/authorization").AsConfig . | indent 2 }}
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
spec:
- initContainers:
- - name: {{ include "common.name" . }}-inject-demo-project
- command:
- - /bin/bash
- - -c
- - >
- git clone -b {{ .Values.config.gerritBranch }} --single-branch {{ .Values.config.gerritProject }} /tmp/gerrit;
- echo "Clone complete. Copying from /tmp/gerrit/heat to /share";
- cp -rf /tmp/gerrit/heat /share;
- echo "Done.";
- image: "{{ .Values.global.ubuntuInitRepository }}/{{ .Values.ubuntuInitImage }}"
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- volumeMounts:
- - name: demodir
- mountPath: "/share"
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
readOnly: true
- name: robot-eteshare
mountPath: /share/config
- - name: robot-resources
- mountPath: /var/opt/OpenECOMP_ETE/robot/resources/policy_interface.robot
- subPath: policy_interface.robot
- - name: robot-resources
- mountPath: /var/opt/OpenECOMP_ETE/robot/resources/sdngc_interface.robot
- subPath: sdngc_interface.robot
- - name: robot-resources
- mountPath: /var/opt/OpenECOMP_ETE/robot/resources/oof_interface.robot
- subPath: oof_interface.robot
- - name: robot-lighttpd-authorization
- mountPath: /etc/lighttpd/authorization
- subPath: authorization
- - name: demodir
- mountPath: /share
- name: robot-logs
mountPath: /share/logs
resources:
configMap:
name: {{ include "common.fullname" . }}-eteshare-configmap
defaultMode: 0755
- - name: robot-resources
- configMap:
- name: {{ include "common.fullname" . }}-resources-configmap
- - name: robot-lighttpd-authorization
- configMap:
- name: {{ include "common.fullname" . }}-lighttpd-authorization-configmap
- - name: demodir
- emptyDir: {}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
# Application configuration defaults.
#################################################################
config:
- # Username of the lighthttpd server. Used for HTML auth for webpage access
- lightHttpdUsername: robot
- # Password of the lighthttpd server. Used for HTML auth for webpage access
- lightHttpdPassword: robot
- # gerrit branch where the latest heat code is checked in
- gerritBranch: 2.0.0-ONAP
- # gerrit project where the latest heat code is checked in
- gerritProject: http://gerrit.onap.org/r/demo.git
-
# Demo configuration
# Nexus demo artifact version. Maps to GLOBAL_INJECTED_ARTIFACTS_VERSION
+++ /dev/null
-cassandraConfig:
- cassandraHosts: {{ .Values.config.cassandraHosts }}
- reconnectTimeout : {{ .Values.config.cassandraReconnectTimeout }}
- socketReadTimeout: {{ .Values.config.cassandraSocketReadTimeout }}
- socketConnectTimeout: {{ .Values.config.cassandraSocketConnectTimeout }}
- authenticate: true
- username: {{ .Values.config.cassandraUserName }}
- password: {{ .Values.config.cassandraUserPassword }}
- ssl: {{ .Values.config.cassandraSslEnabled }}
- truststorePath : {{ .Values.config.cassandraTruststorePath }}
- truststorePassword : {{ .Values.config.cassandraTruststorePassword }}
-
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Service Design and Creation Workflow Designer backend
+name: sdc-wfd-be
+version: 2.0.0
\ No newline at end of file
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
- /root/job_complete.py
args:
- --job-name
- - {{ include "common.fullname" . }}-init-activity-spec
+ - {{ include "common.fullname" . }}-workflow-init
env:
- name: NAMESPACE
valueFrom:
env:
- name: JAVA_OPTIONS
value: {{ .Values.config.javaOptions }}
- volumeMounts:
- - name: {{ include "common.fullname" . }}-config
- mountPath: /etc/onap/activity-spec/be/config
- volumes:
- - name: {{ include "common.fullname" . }}-config
- configMap:
- name : {{ include "common.fullname" . }}-configmap
- defaultMode: 0755
+ - name: CS_HOSTS
+ value: "{{ .Values.config.cassandraHosts }}"
+ - name: CS_PORT
+ value: "{{ .Values.config.cassandraClientPort }}"
+ - name: CS_USER
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
+ - name: CS_PASSWORD
+ valueFrom:
+ secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
+ - name: SDC_PROTOCOL
+ value: "{{ .Values.config.sdcProtocol }}"
+ - name: SDC_ENDPOINT
+ value: "{{ .Values.config.sdcEndpoint }}"
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
apiVersion: batch/v1
kind: Job
metadata:
- name: {{ include "common.fullname" . }}-init-activity-spec
+ name: {{ include "common.fullname" . }}-workflow-init
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}-job
image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- - /root/ready.py
+ - /root/job_complete.py
args:
- - --container-name
- - sdc-cs
+ - --job-name
+ - {{ .Release.Name }}-sdc-cs-config-cassandra
env:
- name: NAMESPACE
valueFrom:
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
env:
- name: CS_HOST
- value: sdc-cs
+ value: "sdc-cs"
+ - name: CS_PORT
+ value: "{{ .Values.config.cassandraThriftClientPort }}"
+ - name: CS_AUTHENTICATE
+ value: "{{ .Values.config.cassandaAuthenticationEnabled }}"
- name: CS_USER
valueFrom:
secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user}
secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
- restartPolicy: Never
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
-# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/activity-spec:1.3.0-SNAPSHOT
-configInitImage: onap/activity-spec-init:1.3.0-SNAPSHOT
+image: onap/workflow-backend:1.3.0-SNAPSHOT
+configInitImage: onap/workflow-init:1.3.0-SNAPSHOT
pullPolicy: Always
# flag to enable debugging - application support required
debugEnabled: false
config:
- javaOptions: "-Xmx1536m -Xms1536m"
- cassandraSslEnabled: "false"
- cassandraHosts: ['sdc-cs']
- cassandraUserName: "asdc_user"
- cassandraUserPassword: "Aa1234%^!"
- cassandraReconnectTimeout: 30000
- cassandraSocketReadTimeout: 20000
- cassandraSocketConnectTimeout: 20000
- cassandraTruststorePath: "/path/path"
- cassandraTruststorePassword: "Aa123456"
+ javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6000,server=y,suspend=n -Xmx1536m -Xms1536m"
+ cassandaAuthenticationEnabled: true
+ cassandraHosts: sdc-cs
+ cassandraThriftClientPort: 9160
+ cassandraClientPort: 9042
+ sdcProtocol: HTTP
+ sdcEndpoint: sdc-be:8080
# default number of instances
replicaCount: 1
type: NodePort
internalPort: 8080
externalPort: 8080
- portName: sdc-act
+ portName: sdc-wfd-be
nodePort: "57"
ingress:
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Service Design and Creation Workflow Designer frontend
+name: sdc-wfd-fe
+version: 2.0.0
\ No newline at end of file
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
echo "Visit http://127.0.0.1:8080 to use your application"
kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
{{- end }}
-
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "sdc-wfd-be"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: BACKEND
+ value: {{ .Values.config.backendServerURL }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
-# Copyright © 2018 ZTE
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
annotations:
msb.onap.org/service-info: '[
{
- "serviceName": "workflow-modeler",
+ "serviceName": "wf-gui",
"version": "v1",
- "url": "/api/workflow-modeler/v1",
- "protocol": "REST",
- "port": "{{ .Values.service.internalPort }}",
- "enable_ssl": true,
- "visualRange":"1"
- },
- {
- "serviceName": "workflow-modeler-ui",
- "version": "v1",
- "url": "/workflow-modeler",
+ "url": "/",
"protocol": "UI",
- "path": "/workflow-modeler",
"port": "{{ .Values.service.internalPort }}",
- "visualRange":"1"
+ "visualRange":"0|1"
}
]'
spec:
type: {{ .Values.service.type }}
ports:
+ {{if eq .Values.service.type "NodePort" -}}
- port: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName | default "http" }}
+ {{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
--- /dev/null
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/workflow-frontend:1.3.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+config:
+ javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6001,server=y,suspend=n -Xmx256m -Xms256m"
+ backendServerURL: "http://sdc-wfd-be:8080"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 60
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 60
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ internalPort: 8080
+ externalPort: 8080
+ portName: sdc-wfd-fe
+ nodePort: "56"
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
"FE_VIP": "sdc-fe.{{include "common.namespace" .}}",
"ES_VIP": "sdc-es.{{include "common.namespace" .}}",
"KB_VIP": "sdc-kb.{{include "common.namespace" .}}",
-
+ "DCAE_BE_VIP": "",
+ "DCAE_FE_VIP": "",
"interfaces": {
"application": "eth0",
"private": "eth0"
"dcae_discovery_url": "{{.Values.config.environment.dcaeUrl}}",
"dcae_source_url": "{{.Values.config.environment.dcaeUrl}}"
},
+ "DCAE-TAB": {
+ "dcae_dt_discovery_url": "",
+ "dcae_dt_source_url": ""
+ },
"WORKFLOW": {
- "workflow_discovery_url": "{{.Values.config.environment.workflowUrl}}",
- "workflow_source_url": "{{.Values.config.environment.workflowUrl}}"
+ "workflow_discovery_url": "http://sdc-wfd-fe.{{include "common.namespace" .}}:8080",
+ "workflow_source_url": "http://sdc.workflow.plugin.simpledemo.onap.org:30256"
}
},
"VnfRepo": {
"cassandra_password": "Aa1234%^!",
"concurrent_writes": "32",
"cluster_name": "SDC-CS-",
+ "datacenter_name": "SDC-CS-",
"multithreaded_compaction": "false",
"cache_dir": "/var/lib/cassandra/saved_caches",
"log_file": "/var/lib/cassandra/log/system.log",
fi
echo "Installing Opendaylight cluster features"
- cat $ODL_HOME/etc/org.apache.karaf.features.cfg | sed -e "\|featuresBoot=config|s|$|,odl-mdsal-clustering,odl-jolokia|" > $ODL_HOME/etc/org.apache.karaf.features.cfg
+ mv $ODL_HOME/etc/org.apache.karaf.features.cfg $ODL_HOME/etc/org.apache.karaf.features.cfg.orig
+ cat $ODL_HOME/etc/org.apache.karaf.features.cfg.orig | sed -e "\|featuresBoot=config|s|$|,odl-mdsal-clustering,odl-jolokia|" > $ODL_HOME/etc/org.apache.karaf.features.cfg
#${ODL_HOME}/bin/client feature:install odl-mdsal-clustering
#${ODL_HOME}/bin/client feature:install odl-jolokia
echo "Installed at `date`" > ${SDNC_HOME}/.installed
fi
-exec ${ODL_HOME}/bin/karaf
+exec ${ODL_HOME}/bin/karaf server
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
image: onap/vfc/catalog:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
--- /dev/null
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP VFC - DB
+name: vfc-db
+version: 2.0.0
-# Copyright © 2018 ZTE
+# Copyright (C) 2018 Verizon. All Rights Reserved
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
ports:
- containerPort: {{ .Values.service.internalPort }}
- {{ if eq .Values.liveness.enabled true }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
livenessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
port: {{ .Values.service.internalPort }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: MSB_ADDR
+ value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}2
+
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName }}2
+
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
--- /dev/null
+# Copyright (C) 2018 Verizon. All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/vfc/db:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 120
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: vfc-db
+ portName: vfc-db
+ externalPort: 3306
+ internalPort: 3306
+ externalPort2: 6379
+ internalPort2: 6379
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/emsdriver:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/gvnfmdriver:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/nfvo/svnfm/huawei:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/jujudriver:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/multivimproxy:1.0.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/nfvo/svnfm/nokiav2:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/nfvo/svnfm/nokia:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
image: onap/vfc/nslcm:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/resmanagement:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
image: onap/vfc/vnflcm:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
+
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
image: onap/vfc/vnfmgr:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
-#Example init container for dependency checking
-# - command:
-# - /root/ready.py
-# args:
-# - --container-name
-# - mariadb
-# env:
-# - name: NAMESPACE
-# valueFrom:
-# fieldRef:
-# apiVersion: v1
-# fieldPath: metadata.namespace
-# image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-# imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-# name: {{ include "common.name" . }}-readiness
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - vfc-db
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
containers:
- name: {{ include "common.name" . }}
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
env:
- name: MSB_ADDR
value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
+ - name: MYSQL_ADDR
+ value: "{{ .Values.global.config.dbServiceName }}:{{ .Values.global.config.dbPort }}"
volumeMounts:
- name: {{ include "common.fullname" . }}-localtime
mountPath: /etc/localtime
image: onap/vfc/vnfres:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/wfengine-activiti:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/wfengine-mgrservice:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/ztesdncdriver:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
labels:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
spec:
initContainers:
#Example init container for dependency checking
image: onap/vfc/ztevnfmdriver:1.1.0
pullPolicy: Always
+#Istio sidecar injection policy
+istioSidecar: true
+
# flag to enable debugging - application support required
debugEnabled: false
# probe configuration parameters
liveness:
- initialDelaySeconds: 10
+ initialDelaySeconds: 120
periodSeconds: 10
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
config:
msbServiceName: msb-iag
msbPort: 80
+ dbServiceName: vfc-db
+ dbPort: 3306
# application configuration
config:
metadata:
labels:
app: {{ include "common.fullname" . }}
+ release: {{ .Release.Name }}
annotations:
pod.alpha.kubernetes.io/initialized: "true"
spec:
spec:
template:
metadata:
+ labels:
+ release: {{ .Release.Name }}
name: vid-galera-init
spec:
initContainers:
Code Review / oom.git / commitdiff