--- /dev/null
+
+#!/bin/bash
+# -*- indent-tabs-mode: nil -*- # vi: set expandtab:
+# ================================================================================
+# Copyright (c) 2017-2022 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#MVN_PROJECT_MODULEID="$1"
+#MVN_PHASE="$2"
+#PROJECT_ROOT=$(dirname $0)
+FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
+if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
+ MVN_PROJECT_MODULEID=""
+fi
+if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
+ echo "=> for SNAPSHOT artifact build"
+ MVN_DEPLOYMENT_TYPE='SNAPSHOT'
+else
+ echo "=> for STAGING/RELEASE artifact build"
+ MVN_DEPLOYMENT_TYPE='STAGING'
+fi
+echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]"
+TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
+# expected environment variables
+if [ -z "${MVN_NEXUSPROXY}" ]; then
+ echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed"
+ exit
+fi
+MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
+echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
+if [ -z "$WORKSPACE" ]; then
+ WORKSPACE=$(pwd)
+fi
+export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
+#RELEASE_TAG=${MVN_RELEASE_TAG:-R11}
+#if [ "$RELEASE_TAG" == "R1" ]; then
+# unset RELEASE_TAG
+#fi
+# mvn phase in life cycle
+MVN_PHASE="$2"
+echo "MVN_RELEASE_TAG is [$MVN_RELEASE_TAG]"
+echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]"
+echo "MVN_PHASE is [$MVN_PHASE]"
+echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]"
+echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]"
+echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]"
+echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]"
+echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]"
+echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
+MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
+echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]"
+echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]"
+echo "MVN_DOCKERREGISTRY_SNAPSHOT is [$MVN_DOCKERREGISTRY_SNAPSHOT]"
+echo "MVN_DOCKERREGISTRY_PUBLIC is [$MVN_DOCKERREGISTRY_PUBLIC]"
+echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]"
+echo "MVN_PYPISERVER_SERVERID [$MVN_PYPISERVER_SERVERID]"
+echo "MVN_PYPISERVER_BASEURL is [$MVN_PYPISERVER_BASEURL]"
+clean_templated_files()
+{
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ rm -f "$F2"
+ done
+}
+clean_tox_files()
+{
+ TOX_FILES=$(find . -name ".tox")
+ TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
+ for F in $TOX_FILES; do
+ rm -rf "$F"
+ done
+}
+expand_templates()
+{
+ set +x
+ # set up env variables, get ready for template resolution
+ # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
+ if [ -z "$RELEASE_TAG" ]; then
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
+ else
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
+ export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
+ fi
+ export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
+ # docker registry templates are for poll, so use PUBLIC registry
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
+ export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
+ # Mvn repo
+ export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
+ export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
+ export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
+ export ONAPTEMPLATE_STANDARD_INPUTS_TYPES=" # standard inputs list
+ centos7image_id:
+ type: string
+ ubuntu1604image_id:
+ type: string
+ flavor_id:
+ type: string
+ security_group:
+ type: string
+ public_net:
+ type: string
+ private_net:
+ type: string
+ openstack: {}
+ keypair:
+ type: string
+ key_filename:
+ type: string
+ location_prefix:
+ type: string
+ location_domain:
+ type: string
+ codesource_url:
+ type: string
+ codesource_version:
+ type: string"
+ TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
+ if [ -z "$TEMPLATES" ]; then
+ echo "No template variables found!"
+ return 0
+ fi
+ TEMPLATE_FILES=$(find . -name "*-template")
+ for F in $TEMPLATE_FILES; do
+ F2=$(echo "$F" | sed 's/-template$//')
+ cp -p "$F" "$F2"
+ chmod u+w "$F2"
+
+ echo "====> Resolving the following template from environment variables "
+ echo "$TEMPLATES"
+ for KEY in $TEMPLATES; do
+ VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
+ VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
+ echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
+ sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
+ done
+ done
+ echo "====> Done template resolving"
+}
+test_templates()
+{
+ # make certain that the type references exist
+ TMP=$(mktemp)
+ trap 'rm -f $TMP' 0 1 2 3 15
+ echo Verify that all of the import URLs are correct
+ find . -name '*-template' | sed -e 's/-template$//' |
+ while read file
+ do
+ egrep '^ - .?https?://' < "$file"
+ done | awk '{print $2}' | sed -e 's/"//g' | sort -u |
+ while read url
+ do
+ curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
+ case $(< "$TMP") in
+ 2* ) ;;
+ * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
+ esac
+ done
+ echo Verify that the inputs are correct
+ PATH=$PATH:$PWD/check-blueprint-vs-input/bin
+ find . -name '*-template' | sed -e 's/-template$//' |
+ while read blueprint
+ do
+ check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml || true
+ done
+}
+run_tox_test()
+{
+ set -e -x
+ CURDIR=$(pwd)
+ TOXINIS=$(find . -name "tox.ini")
+ for TOXINI in "${TOXINIS[@]}"; do
+ DIR=$(dirname "$TOXINI")
+ cd "${CURDIR}/${DIR}"
+ rm -rf ./venv-tox ./.tox
+ python3 -m venv ./venv-tox
+ source ./venv-tox/bin/activate
+ pip3 install pip==9.0.3
+ pip3 install --upgrade argparse
+ pip3 install tox==2.9.1
+ if [ "$RUN_BLACK" = yes ]
+ then
+ pip3 install black
+ python3 -m black --line-length 120 --check .
+ fi
+ pip3 freeze
+ tox
+ deactivate
+ rm -rf ./venv-tox ./.tox
+ done
+}
+build_wagons()
+{
+ rm -rf ./*.wgn venv-pkg
+ SETUPFILES=$(find . -name "setup.py")
+
+ python3 -m venv ./venv-pkg
+ source ./venv-pkg/bin/activate
+ pip3 install --upgrade pip
+ pip3 install wagon
+ CURDIR=$(pwd)
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_DIR=$(dirname "$SETUPFILE")
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+ echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
+ wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
+ PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
+ echo Built package: "${PKG_FILE_NAMES[@]}"
+ cd "$CURDIR"
+ done
+ deactivate
+ rm -rf venv-pkg
+}
+build_archives_for_wagons()
+{
+ rm -rf ./*.tgz ./*.zip venv-pkg
+
+ SETUPFILES=$(find "$(pwd)" -name "setup.py")
+ CURDIR=$(pwd)
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
+ PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+ cd "${PLUGIN_FULL_DIR}"/..
+ echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
+ zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
+ tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
+ echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
+ cd "$CURDIR"
+ done
+}
+upload_raw_file()
+{
+ # Extract the username and password to the nexus repo from the settings file
+ USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
+ NETRC=$(mktemp)
+ echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
+ REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
+ OUTPUT_FILE=$1
+ EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
+ if [ "$EXT" == 'yaml' ]; then
+ OUTPUT_FILE_TYPE='text/x-yaml'
+ elif [ "$EXT" == 'sh' ]; then
+ OUTPUT_FILE_TYPE='text/x-shellscript'
+ elif [ "$EXT" == 'gz' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ elif [ "$EXT" == 'tgz' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ elif [ "$EXT" == 'zip' ]; then
+ OUTPUT_FILE_TYPE='application/zip'
+ elif [ "$EXT" == 'wgn' ]; then
+ OUTPUT_FILE_TYPE='application/gzip'
+ else
+ OUTPUT_FILE_TYPE='application/octet-stream'
+ fi
+ # for multi module projects, the raw repo path must match with project name, not project + module
+ # FQDN is project + module
+ # GROUPID is project name
+ if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
+ PROJECT_NAME=${MVN_PROJECT_GROUPID}
+ else
+ PROJECT_NAME=${FQDN}
+ fi
+ if [ -z "$RELEASE_TAG" ]; then
+ SEND_TO="${REPO}/${PROJECT_NAME}"
+ else
+ SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
+ fi
+
+ if [ ! -z "$2" ]; then
+ SEND_TO="$SEND_TO/$2"
+ fi
+ echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
+ curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
+}
+upload_wagon_archives()
+{
+ SETUPFILES=$(find "$(pwd)" -name "setup.py")
+ CURDIR=$(pwd)
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
+ PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+ cd "${PLUGIN_FULL_DIR}"/..
+ echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
+ ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
+ if [ -z "$ARCHIVE_FILE_NAME" ]; then
+ echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
+ exit -1
+ fi
+ upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
+ echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
+ ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
+ if [ -z "$ARCHIVE_FILE_NAME" ]; then
+ echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
+ exit -1
+ fi
+ upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
+ cd "${CURDIR}"
+ done
+}
+upload_wagons_and_type_yamls()
+{
+ SETUPFILES=$(find . -name "setup.py")
+ CURDIR=$(pwd)
+ for SETUPFILE in $SETUPFILES; do
+ PLUGIN_DIR=$(dirname "$SETUPFILE")
+ PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
+ PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
+ PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
+ PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
+ echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
+ TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
+ if [ -z "$TYPEFILE_NAME" ]; then
+ echo "!!! No typefile found with matching package name $PLUGIN_NAME"
+ exit -1
+ fi
+ NEWFILENAME="${PLUGIN_NAME}"_types.yaml
+ if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
+ echo "copy typefile to standard naming"
+ cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
+ fi
+ TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' "$TYPEFILE_NAME" |cut -f2 -d ':' |sed -r 's/\s+//g')
+ WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
+ if [ -z "$WAGONFILE_NAME" ]; then
+ echo "!!! No wagonfile found with matching package name and version as required in typefile: "
+ echo " $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
+ exit -1
+ fi
+ upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
+ upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
+
+ rm -r "$WAGONFILE_NAME"
+ if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
+ rm -f "$NEWFILENAME"
+ fi
+ done
+}
+upload_files_of_extension()
+{
+ FILES=$(ls -1 ./*."$1")
+ for F in $FILES ; do
+ upload_raw_file "$F" "$2"
+ done
+}
+upload_files_of_extension_recursively()
+{
+ FILES=$(find . -name "*.$1")
+ for F in $FILES ; do
+ upload_raw_file "$F" "$2"
+ done
+}
+generate_pypirc_then_publish()
+{
+ set +x
+ USER=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -e "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()" "$SETTINGS_FILE")
+ if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
+ MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
+ fi
+
+ cat > ~/.pypirc <<EOL
+[distutils]
+index-servers =
+ $MVN_PYPISERVER_SERVERID
+
+[$MVN_PYPISERVER_SERVERID]
+repository: $MVN_PYPISERVER_BASEURL
+username: $USER
+password: $PASS
+EOL
+ # this may fail if a package of same version exists
+ python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
+ set -x
+}
+# following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
+#IndependentVersioningandReleaseProcess-StandardizedDockerTagging
+build_and_push_docker()
+{
+ # Old tagging
+ #IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+ # new tagging
+ ENDID=$(echo $FQDN | rev | cut -f1 -d '.' |rev)
+ if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
+ #IMAGENAME="onap/${FQDN/org.onap./}"
+ IMAGENAME="onap/${FQDN}"
+ else
+ #IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
+ IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
+ fi
+ IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
+ IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
+ # use the major and minor version of the MVN artifact version as docker image version
+ VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
+ VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
+ LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
+ # build a docker image
+ docker build --rm -f ./Dockerfile -t "${LFQI}" ./
+ # all local builds push to SNAPSHOT repo
+ REPO=""
+ if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
+ REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
+ elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
+ REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
+ else
+ echo "Fail to determine DEPLOYMENT_TYPE"
+ REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
+ fi
+ echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
+ if [ ! -z "$REPO" ]; then
+ USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
+ PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
+ if [ -z "$USER" ]; then
+ echo "Error: no user provided"
+ fi
+ if [ -z "$PASS" ]; then
+ echo "Error: no password provided"
+ fi
+ [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
+ echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
+ set +x
+ docker login "$REPO" -u "$USER" -p "$PASS"
+ set -x
+ # local tag is imagename:version-timestamp
+ OLDTAG="${LFQI}"
+ # three tags are pushed:
+ # {imagename}:{semver}-SNAPSHOT-{timestamp}Z this is what CIMAN-132 asks
+ # {imagename}:{semver} latest of current version, for testing
+ # {imagename}:latest latest of all, used mainly by csit
+ # LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
+ # Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
+ PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
+ for NEWTAG in ${PUSHTAGS}
+ do
+ echo "tagging ${OLDTAG} to ${NEWTAG}"
+ docker tag "${OLDTAG}" "${NEWTAG}"
+ echo "pushing ${NEWTAG}"
+ docker push "${NEWTAG}"
+ OLDTAG="${NEWTAG}"
+ done
+ fi
+}
+
Code Review / dcaegen2 / deployments.git / commitdiff