--- /dev/null
+--- Service Logic Interpreter --- Dan Timoney --- 2014-11-12 ---
+
+Supported node types
+====================
+
+The following built-in node types are currently supported:
+
+- Flow Control
+
+ - `**block** <#Block_node>`__
+
+ - `**call** <#Call_node>`__
+
+ - `**for** <#For_node>`__
+
+ - `**return** <#Return_node>`__
+
+ - `**set** <#Set_node>`__
+
+ - `**switch** <#Switch_node>`__
+
+- Device Management
+
+ - `**configure** <#Configure_node>`__
+
+- Java Plugin Support
+
+ - `**execute** <#Execute_node>`__
+
+- Recording
+
+ - `**record** <#Record_node>`__
+
+- Resource Management
+
+ - `**delete** <#Delete_node>`__
+
+ - `**exists** <#Exists_node>`__
+
+ - `**get-resource** <#Get-resource_node>`__
+
+ - `**is-available** <#Is-available_node>`__
+
+ - `**notify** <#Notify_node>`__
+
+ - `**release** <#Release_node>`__
+
+ - `**reserve** <#Reserve_node>`__
+
+ - `**save** <#Save_node>`__
+
+ - `**update** <#Update_node>`__
+
+Flow Control
+------------
+
+Block node
+~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **block** node is used to executes a set of nodes.
+
+Attributes
+^^^^^^^^^^
+
++--------------+-----------------------------------------------------------------------------------------------------------------------------------+
+| **atomic** | if *true*, then if a node returns failure, subsequent nodes will not be executed and nodes already executed will be backed out. |
++--------------+-----------------------------------------------------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
+None
+
+Example
+^^^^^^^
+
+::
+
+ <block>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder">
+ <parameter name="file" value="/tmp/sample_r1.log" />
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="RESERVED"/>
+ <parameter name="field3" value="$asePort.uni_circuit_id"/>
+ </record>
+ <return status="success">
+ <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
+ </return>
+ </block>
+
+Call node
+~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **call** node is used to call another graph
+
+Attributes
+^^^^^^^^^^
+
++---------------+------------------------------------------------------------------------------------+
+| **module** | Module of directed graph to call. If unset, defaults to that of calling graph |
++---------------+------------------------------------------------------------------------------------+
+| **rpc** | rpc of directed graph to call. |
++---------------+------------------------------------------------------------------------------------+
+| **version** | version of graph to call, If unset, uses active version. |
++---------------+------------------------------------------------------------------------------------+
+| **mode** | mode (sync/async) of graph to call. If unset, defaults to that of calling graph. |
++---------------+------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Not applicable
+
+Outcomes
+^^^^^^^^
+
++-----------------+------------------------------+
+| **success** | Sub graph returned success |
++-----------------+------------------------------+
+| **not-found** | Graph not found |
++-----------------+------------------------------+
+| **failure** | Subgraph returned success |
++-----------------+------------------------------+
+
+Table: .
+
+Example
+^^^^^^^
+
+::
+
+ <call rpc="svc-topology-reserve" mode="sync" />
+
+For node
+~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **for** node provides a fixed iteration looping mechanism, similar to
+the Java for loop
+
+Attributes
+^^^^^^^^^^
+
++-------------+------------------+
+| **index** | index variable |
++-------------+------------------+
+| **start** | initial value |
++-------------+------------------+
+| **end** | maximum value |
++-------------+------------------+
+
+Parameters
+^^^^^^^^^^
+
+Not applicable.
+
+Outcomes
+^^^^^^^^
+
+Not applicable. The **status** node has no outcomes.
+
+Example
+^^^^^^^
+
+::
+
+ <for index="i" start="0" end="`$service-data.universal-cpe-ft.l2-switch-interfaces_length`">
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <parameter name="logger" value="message-log"/>
+ <parameter name="level" value="info"/>
+ <parameter name="field1" value="`'current l2-switch-interface name is ' + $service-data.universal-cpe-ft.l2-switch-interfaces[$i].name`"/>
+ </record>
+ </for>
+
+Return node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **return** node is used to return a status to the invoking MD-SAL
+application
+
+Attributes
+^^^^^^^^^^
+
++--------------+---------------------------------------------------+
+| **status** | Status value to return (*success* or *failure*) |
++--------------+---------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+The following optional parameters may be passed to convey more detailed
+status information.
+
++---------------------+-----------------------------------------------------------------+
+| **error-code** | A brief, usually numeric, code indicating the error condition |
++---------------------+-----------------------------------------------------------------+
+| **error-message** | A more detailed error message |
++---------------------+-----------------------------------------------------------------+
+
+Outcomes
+^^^^^^^^
+
+Not applicable. The **status** node has no outcomes.
+
+Example
+^^^^^^^
+
+::
+
+ <return status="failure">
+ <parameter name="error-code" value="1542" />
+ <parameter name="error-message" value="Activation failure" />
+ </return>
+
+Set node
+~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **set** node is used to set one or more values in the execution
+context
+
+Attributes
+^^^^^^^^^^
+
++---------------------+-------------------------------------------------------------------------------------+
+| **only-if-unset** | If true the set node will only execute if the current value of the target is null |
++---------------------+-------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Values to be set are passed as parameters
+
+Outcomes
+^^^^^^^^
+
+Not applicable. The **set** node has no outcomes.
+
+Example
+^^^^^^^
+
+::
+
+ <set>
+ <parameter name="vlan" value="$network.provider-segmentation-id" />
+ </set>
+
+Switch node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **switch** node is used to make a decision based on its **test**
+attribute.
+
+Attributes
+^^^^^^^^^^
+
++------------+---------------------+
+| **test** | Condition to test |
++------------+---------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
+Depends on the **test** condition
+
+Example
+^^^^^^^
+
+::
+
+ <switch test="$uni-cir-units">
+ <outcome value="Mbps">
+ <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
+ pfx="asePort">
+
+ <outcome value="success">
+ <return status="success">
+ <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
+ </return>
+ </outcome>
+ <outcome value="Other">
+ <return status="failure">
+ <parameter name="error-code" value="1010" />
+ <parameter name="error-message" value="No ports found that match criteria" />
+ </return>
+ </outcome>
+ </reserve>
+ </outcome>
+ <outcome value="Gbps">
+ <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value*1000"
+ pfx="asePort">
+
+ <outcome value="success">
+ <return status="success">
+ <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
+ </return>
+ </outcome>
+ <outcome value="Other">
+ <return status="failure">
+ <parameter name="error-code" value="1010" />
+ <parameter name="error-message" value="No ports found that match criteria" />
+ </return>
+ </outcome>
+ </reserve>
+ </outcome>
+ </switch>
+
+Device Management
+-----------------
+
+Configure node
+~~~~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **configure** node is used to configure a device.
+
+Attributes
+^^^^^^^^^^
+
++----------------+-----------------------------------------------------------------------------------+
+| **adaptor** | Fully qualified Java class of resource adaptor to be used |
++----------------+-----------------------------------------------------------------------------------+
+| **activate** | Activate device/interface, for devices that support a separate activation step. |
++----------------+-----------------------------------------------------------------------------------+
+| **key** | SQL-like string specifying criteria for item to configure |
++----------------+-----------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Specific to device adaptor.
+
+Outcomes
+^^^^^^^^
+
++----------------------+------------------------------------------------------------------+
+| **success** | Device successfully configured |
++----------------------+------------------------------------------------------------------+
+| **not-found** | Element to be configured does not exist. |
++----------------------+------------------------------------------------------------------+
+| **not-ready** | Element is not in a state where it can be configured/activated |
++----------------------+------------------------------------------------------------------+
+| **already-active** | Attempt to activate element that is already active |
++----------------------+------------------------------------------------------------------+
+| **failure** | Configure failed for some other reason |
++----------------------+------------------------------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <configure adaptor="org.onap.ccsdk.sli.adaptors.emt.EmtAdaptor"
+ key="$uni-circuit-id" activate="true">
+ <parameter name="circuit.id" value="$uni-circuit-id" />
+ <parameter name="subscriber.name" value="$subscriber-name" />
+ <parameter name="emt.clli" value="$edge-device-clli" />
+ <parameter name="port.tagging" value="$port-tagging" />
+ <parameter name="port.mediaSpeed" value="$media-speed" />
+ <parameter name="location.state" value="$uni-location-state" />
+ <parameter name="location.city" value="$uni-location-city" />
+ <parameter name="cosCategory" value="$cos-category" />
+ <parameter name="gosProfile" value="$gos-profile" />
+ <parameter name="lldp" value="$asePort.resource-lldp" />
+ <parameter name="mtu" value="$asePort.resource-mtu" />
+ <outcome value="success">
+ <block>
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder">
+ <parameter name="file" value="/tmp/sample_r1.log" />
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="ACTIVE"/>
+ <parameter name="field3" value="$uni-circuit-id"/>
+ </record>
+ <return status="success">
+ <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" />
+ </return>
+ </block>
+ </outcome>
+ <outcome value="already-active">
+ <return status="failure">
+ <parameter name="error-code" value="1590" />
+ <parameter name="error-message" value="Port already active" />
+ </return>
+ </outcome>
+ <outcome value="Other">
+ <return status="failure">
+ <parameter name="error-code" value="1542" />
+ <parameter name="error-message" value="Activation failure" />
+ </return>
+ </outcome>
+ </configure>
+
+Java Plugin Support
+-------------------
+
+Execute node
+~~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+An **execute** node is used to execute Java code supplied as a plugin
+
+Attributes
+^^^^^^^^^^
+
++--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of plugin to be used |
++--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| **method** | Name of method in the plugin class to execute. Method must return void, and take 2 arguments: a Map (for parameters) and a SvcLogicContext (to allow plugin read/write access to context memory) |
++--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Specific to plugin / method
+
+Outcomes
+^^^^^^^^
+
++--------------------------+-----------------------------------------------------------------+
+| **success** | Device successfully configured |
++--------------------------+-----------------------------------------------------------------+
+| **not-found** | Plugin class could not be loaded |
++--------------------------+-----------------------------------------------------------------+
+| **unsupported-method** | Named method taking (Map, SvcLogicContext) could not be found |
++--------------------------+-----------------------------------------------------------------+
+| **failure** | Configure failed for some other reason |
++--------------------------+-----------------------------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <execute plugin="org.onap.ccsdk.sli.plugins.HelloWorld"
+ method="log">
+ <parameter name="message" value="Hello, world!" />
+ <outcome value="success">
+ <return status="success"/>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure">
+ <parameter name="error-code" value="1590" />
+ <parameter name="error-message" value="Could not locate plugin" />
+ </return>
+ </outcome>
+ <outcome value="Other">
+ <return status="failure">
+ <parameter name="error-code" value="1542" />
+ <parameter name="error-message" value="Internal error" />
+ </return>
+ </outcome>
+ </execute>
+
+Recording
+---------
+
+Record node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **record** node is used to record an event. For example, this might be
+used to log provisioning events.
+
+Attributes
+^^^^^^^^^^
+
++--------------+---------------------------------------------------+
+| **plugin** | Fully qualified Java class to handle recording. |
++--------------+---------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Parameters will depend on the plugin being used. For the FileRecorder
+class, the parameters are as follows
+
++--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| **file** | The file to which the record should be written |
++--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+| **field1** | First field to write. There will be **field** parameters for each field to write, from **field1** through **fieldN**. A special value \_\_TIMESTAMP\_\_ may be assigned to a field to insert the current timestamp |
++--------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
+
+Outcomes
+^^^^^^^^
+
++---------------+--------------------------------------------+
+| **success** | Record successfully written |
++---------------+--------------------------------------------+
+| **failure** | Record could not be successfully written |
++---------------+--------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <record plugin="org.onap.ccsdk.sli.core.sli.recording.FileRecorder">
+ <parameter name="file" value="/tmp/sample_r1.log" />
+ <parameter name="field1" value="__TIMESTAMP__"/>
+ <parameter name="field2" value="ACTIVE"/>
+ <parameter name="field3" value="$uni-circuit-id"/>
+ </record>
+
+Resource Management
+-------------------
+
+Delete node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **delete** node is used to delete a resource from the local resource
+inventory.
+
+Attributes
+^^^^^^^^^^
+
++----------------+-------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+-------------------------------------------------------------+
+| **resource** | Type of resource to delete |
++----------------+-------------------------------------------------------------+
+| **key** | SQL-like string specifying key to delete |
++----------------+-------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++---------------+--------------------------------------------+
+| **success** | Resource specified deleted successfully. |
++---------------+--------------------------------------------+
+| *failure*> | Resource specified was not deleted |
++---------------+--------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <delete plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="uni_circuit_id == $uni-circuit-id">
+ <outcome value="true">
+ <return status="success"/>
+ </outcome>
+ <outcome value="false">
+ <return status="failure"/>
+ </outcome>
+ </delete>
+
+Exists node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+An **exists** node is used to determine whether a particular instance of
+a resource exists. For example, this might be used to test whether a
+particular switch CLLI is provisioned.
+
+Attributes
+^^^^^^^^^^
+
++----------------+-------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+-------------------------------------------------------------+
+| **resource** | Type of resource to check |
++----------------+-------------------------------------------------------------+
+| **key** | SQL-like string specifying key to check for |
++----------------+-------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++-------------+---------------------------------+
+| **true** | Resource specified exists. |
++-------------+---------------------------------+
+| **false** | Resource specified is unknown |
++-------------+---------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <exists plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="uni_circuit_id == $uni-circuit-id">
+ <outcome value="true">
+ <return status="success"/>
+ </outcome>
+ <outcome value="false">
+ <return status="failure"/>
+ </outcome>
+ </exists>
+
+Get-resource node
+~~~~~~~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **get-resource** node is used to retrieve information about a
+particular resource and make it available to other nodes in the service
+logic tree. For example, this might be used to retrieve information
+about a particular uni-port.
+
+Attributes
+^^^^^^^^^^
+
++----------------+------------------------------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+------------------------------------------------------------------------------------------+
+| **resource** | Type of resource to retrieve |
++----------------+------------------------------------------------------------------------------------------+
+| **key** | SQL-like string specifying criteria for retrieval |
++----------------+------------------------------------------------------------------------------------------+
+| **pfx** | Prefix to add to context variable names set for data retrieved |
++----------------+------------------------------------------------------------------------------------------+
+| **select** | String to specify, if key matches multiple entries, which entry should take precedence |
++----------------+------------------------------------------------------------------------------------------+
+| **order-by** | Prefix to add to context variable names set for data retrieved |
++----------------+------------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++-----------------+--------------------------------------------------+
+| **success** | Resource successfully retrieved |
++-----------------+--------------------------------------------------+
+| **not-found** | Resource referenced does not exist |
++-----------------+--------------------------------------------------+
+| **failure** | Resource retrieve failed for some other reason |
++-----------------+--------------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <get-resource plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="uni_circuit_id == $uni-circuit-id"
+ pfx="current-port">
+ <outcome value="success">
+ <return status="success"/>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure"/>
+ </outcome>
+ <outcome value="failure">
+ <return status="failure"/>
+ </outcome>
+ </get-resource>
+
+Is-available node
+~~~~~~~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+An **is-available** node is used to determine whether a particular type
+of resource is available. For example, this might be used to test
+whether any ports are available for assignment on a particular switch.
+
+Attributes
+^^^^^^^^^^
+
++----------------+------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+------------------------------------------------------------------+
+| **resource** | Type of resource to check |
++----------------+------------------------------------------------------------------+
+| **key** | SQL-like string specifying key to check for |
++----------------+------------------------------------------------------------------+
+| **pfx** | Prefix to add to context variable names set for data retrieved |
++----------------+------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++-------------+---------------------------------------+
+| **true** | Resource requested is available |
++-------------+---------------------------------------+
+| **false** | Resource requested is not available |
++-------------+---------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <is-available plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value">
+ <outcome value="true">
+ <return status="success"/>
+ </outcome>
+ <outcome value="false">
+ <return status="failure"/>
+ </outcome>
+ </is-available>
+
+Notify node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **notify** node is used to inform an external application (e.g. A&AI)
+that a resource was updated.
+
+Attributes
+^^^^^^^^^^
+
++----------------+---------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+---------------------------------------------------------------------+
+| **resource** | Identifies resource that was updated |
++----------------+---------------------------------------------------------------------+
+| **action** | Action that triggered notification to be sent (ADD/UPDATE/DELETE) |
++----------------+---------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++---------------+----------------------------------------+
+| **success** | Notification was successful |
++---------------+----------------------------------------+
+| **failure** | Notification failed is not available |
++---------------+----------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <notify plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ action="ADD">
+ <outcome value="success">
+ <return status="success"/>
+ </outcome>
+ <outcome value="Other">
+ <return status="failure"/>
+ </outcome>
+ </notify>
+
+Release node
+~~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **release** node is used to mark a resource as no longer in use, and
+thus available for assignment.
+
+Attributes
+^^^^^^^^^^
+
++----------------+------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+------------------------------------------------------------------+
+| **resource** | Type of resource to release |
++----------------+------------------------------------------------------------------+
+| **key** | SQL-like string specifying key to check of resource to release |
++----------------+------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++-----------------+-------------------------------------------------+
+| **success** | Resource successfully released |
++-----------------+-------------------------------------------------+
+| **not-found** | Resource referenced does not exist |
++-----------------+-------------------------------------------------+
+| **failure** | Resource release failed for some other reason |
++-----------------+-------------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <release plugin="org.onap.ccsdk.sli.adaptors.SampleServiceResource"
+ resource="ase-port"
+ key="uni_circuit_id == $uni-circuit-id">
+ <outcome value="success">
+ <return status="success"/>
+ </outcome>
+ <outcome value="not-found">
+ <return status="failure"/>
+ </outcome>
+ <outcome value="failure">
+ <return status="failure"/>
+ </outcome>
+ </release>
+
+Reserve node
+~~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **reserve** node is used to reserve a particular type of resource..
+For example, this might be used to reserve a port on a particular
+switch.
+
+Attributes
+^^^^^^^^^^
+
++----------------+----------------------------------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+----------------------------------------------------------------------------------------------+
+| **resource** | Type of resource to reserve |
++----------------+----------------------------------------------------------------------------------------------+
+| **key** | SQL-like string specifying criteria for reservation |
++----------------+----------------------------------------------------------------------------------------------+
+| **select** | String to specify, if **key** matches multiple entries, which entry should take precedence |
++----------------+----------------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+None
+
+Outcomes
+^^^^^^^^
+
++---------------+----------------------------------------------------+
+| **success** | Resource requested was successfully reserved |
++---------------+----------------------------------------------------+
+| **failure** | Resource requested was not successfully reserved |
++---------------+----------------------------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <reserve plugin="org.onap.ccsdk.sli.adaptors.samplesvc.SampleServiceResource"
+ resource="ase-port"
+ key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
+ select="min(speed)">
+ <outcome value="success">
+ <return status="success"/>
+ </outcome>
+ <outcome value="failure">
+ <return status="failure"/>
+ </outcome>
+ </reserve>
+
+Save node
+~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+A **save** node is used to save information about a particular resource
+to persistent storage. For example, this might be used to save
+information about a particular uni-port.
+
+Attributes
+^^^^^^^^^^
+
++----------------+------------------------------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+------------------------------------------------------------------------------------------+
+| **resource** | Type of resource to save |
++----------------+------------------------------------------------------------------------------------------+
+| **key** | SQL-like string specifying criteria for retrieval |
++----------------+------------------------------------------------------------------------------------------+
+| **force** | If "true", save resource even if this resource is already stored in persistent storage |
++----------------+------------------------------------------------------------------------------------------+
+| **pfx** | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext |
++----------------+------------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Values to save (columns) are specified as parameters, with each name
+corresponding to a column name and each value corresponding to the value
+to set.
+
+Outcomes
+^^^^^^^^
+
++---------------+-------------------------------+
+| **success** | Resource successfully saved |
++---------------+-------------------------------+
+| **failure** | Resource save failed |
++---------------+-------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <save plugin="`$sample-resource-plugin`" resource="vnf"
+ key="vnf-name = $requests.vnf.vnf-name" force="true"
+ pfx="requests.vnf">
+ <parameter name="vnf-name"
+ value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" />
+ <parameter name="vnf-type" value="vce" />
+ <parameter name="orchestration-status" value="pending-create" />
+ <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" />
+ <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" />
+ <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" />
+ </save>
+
+Update node
+~~~~~~~~~~~
+
+Description
+^^^^^^^^^^^
+
+An **update** node is used to update information about a particular
+resource to persistent storage.
+
+Attributes
+^^^^^^^^^^
+
++----------------+----------------------------------------------------------------------------------------+
+| **plugin** | Fully qualified Java class of resource adaptor to be used |
++----------------+----------------------------------------------------------------------------------------+
+| **resource** | Type of resource to update |
++----------------+----------------------------------------------------------------------------------------+
+| **key** | SQL-like string specifying criteria for retrieval |
++----------------+----------------------------------------------------------------------------------------+
+| **pfx** | Prefix to be prepended to variable names, when attributes are set in SvcLogicContext |
++----------------+----------------------------------------------------------------------------------------+
+
+Parameters
+^^^^^^^^^^
+
+Values to save (columns) are specified as parameters, with each name
+corresponding to a column name and each value corresponding to the value
+to set.
+
+Outcomes
+^^^^^^^^
+
++---------------+-------------------------------+
+| **success** | Resource successfully saved |
++---------------+-------------------------------+
+| **failure** | Resource save failed |
++---------------+-------------------------------+
+
+Example
+^^^^^^^
+
+::
+
+ <update plugin="`$sample-resource-plugin`" resource="vnf"
+ key="vnf-name = $requests.vnf.vnf-name"
+ pfx="requests.vnf">
+ <parameter name="vnf-name"
+ value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" />
+ <parameter name="vnf-type" value="vce" />
+ <parameter name="orchestration-status" value="pending-create" />
+ <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" />
+ <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" />
+ <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" />
+ </update>
-{"apiVersion":"1.0.0","swaggerVersion":"1.2","basePath":"restconf","resourcePath":null,"produces":["application/json","application/xml"],"apis":[{"path":"/config","operations":[{"method":"POST","summary":null,"notes":"Defines API to service logic interpreter","type":"(config)SLI-API_modulePOST","nickname":"POST-SLI-API_module","consumes":["application/json","application/xml"],"parameters":[{"name":"**(config)test-results","description":null,"required":false,"type":"SLI-API(config)test-results-TOP","paramType":"body"}],"responseMessages":null}]},{"path":"/config/SLI-API:test-results","operations":[{"method":"GET","summary":null,"notes":"Test results","type":"(config)test-results","nickname":"GET-test-results","consumes":null,"parameters":[],"responseMessages":null},{"method":"PUT","summary":null,"notes":"Test results","type":"SLI-API(config)test-results-TOP","nickname":"PUT-test-results","consumes":["application/json","application/xml"],"parameters":[{"name":"(config)test-results","description":null,"required":false,"type":"SLI-API(config)test-results-TOP","paramType":"body"}],"responseMessages":null},{"method":"DELETE","summary":null,"notes":"Test results","type":null,"nickname":"DELETE-test-results","consumes":null,"parameters":[],"responseMessages":null},{"method":"POST","summary":null,"notes":"Test results","type":"(config)test-resultsPOST","nickname":"POST-test-results","consumes":["application/json","application/xml"],"parameters":[{"name":"**(config)test-result","description":null,"required":false,"type":"SLI-API/test-results(config)test-result-TOP","paramType":"body"}],"responseMessages":null}]},{"path":"/config/SLI-API:test-results/test-result/{test-identifier}","operations":[{"method":"GET","summary":null,"notes":null,"type":"(config)test-result","nickname":"GET-test-result","consumes":null,"parameters":[{"name":"test-identifier","description":null,"required":false,"type":"string","paramType":"path"}],"responseMessages":null},{"method":"PUT","summary":null,"notes":null,"type":"SLI-API/test-results(config)test-result-TOP","nickname":"PUT-test-result","consumes":["application/json","application/xml"],"parameters":[{"name":"test-identifier","description":null,"required":false,"type":"string","paramType":"path"},{"name":"(config)test-result","description":null,"required":false,"type":"SLI-API/test-results(config)test-result-TOP","paramType":"body"}],"responseMessages":null},{"method":"DELETE","summary":null,"notes":null,"type":null,"nickname":"DELETE-test-result","consumes":null,"parameters":[{"name":"test-identifier","description":null,"required":false,"type":"string","paramType":"path"}],"responseMessages":null}]},{"path":"/operational/SLI-API:test-results","operations":[{"method":"GET","summary":null,"notes":"Test results","type":"(operational)test-results","nickname":"GET-test-results","consumes":null,"parameters":[],"responseMessages":null}]},{"path":"/operations/SLI-API:healthcheck","operations":[{"method":"POST","summary":null,"notes":null,"type":"(healthcheck)output-TOP","nickname":"healthcheck","consumes":["application/json","application/xml"],"parameters":[{"name":null,"description":null,"required":false,"type":"(healthcheck)input-TOP","paramType":"body"}],"responseMessages":null}]},{"path":"/operations/SLI-API:execute-graph","operations":[{"method":"POST","summary":null,"notes":" Method to add a new parameter.","type":"(execute-graph)output-TOP","nickname":"execute-graph","consumes":["application/json","application/xml"],"parameters":[{"name":null,"description":null,"required":false,"type":"(execute-graph)input-TOP","paramType":"body"}],"responseMessages":null}]}],"models":{"(execute-graph)output":{"$schema":"http://json-schema.org/draft-04/schema","id":"(execute-graph)output","type":"object","properties":{"SLI-API:response-code":{"type":"Some response-code","required":false},"SLI-API:ack-final-indicator":{"type":"Some ack-final-indicator","required":false},"SLI-API:context-memory-json":{"type":"Some context-memory-json","required":false},"SLI-API:response-message":{"type":"Some response-message","required":false}}},"SLI-API(config)sli-parameter":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API(config)sli-parameter","type":"object","properties":{"SLI-API:boolean-value":{"type":"true","required":false},"SLI-API:parameter-name":{"description":"Parameter name","type":"Some parameter-name","required":false},"SLI-API:int-value":{"type":"-2147483648","required":false},"SLI-API:string-value":{"type":"Some string-value","required":false}}},"SLI-API/test-results(config)test-result":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API/test-results(config)test-result","type":"object","properties":{"SLI-API:results":{"type":"array","items":{"type":"Some results"},"required":false},"SLI-API:test-identifier":{"type":"Some test-identifier","required":false}}},"(config)sli-parameterPOST":{"$schema":"http://json-schema.org/draft-04/schema","id":"(config)sli-parameterPOST","type":"object","properties":{"parameter-name":{"description":"Parameter name","type":"Some parameter-name","required":false},"boolean-value":{"type":"true","required":false},"string-value":{"type":"Some string-value","required":false},"int-value":{"type":"-2147483648","required":false}}},"SLI-API(config)test-results":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API(config)test-results","type":"object","properties":{"SLI-API:test-result":{"type":"array","items":{"$ref":"SLI-API/test-results(config)test-result"}}}},"(healthcheck)input":{"$schema":"http://json-schema.org/draft-04/schema","id":"(healthcheck)input","type":"object","properties":{"SLI-API:dummy-leaf":{"type":"Some dummy-leaf","required":false}}},"(execute-graph)input":{"$schema":"http://json-schema.org/draft-04/schema","id":"(execute-graph)input","type":"object","properties":{"SLI-API:rpc-name":{"type":"Some rpc-name","required":false},"SLI-API:sli-parameter":{"type":"array","items":{"$ref":"SLI-API(config)sli-parameter"}},"SLI-API:module-name":{"type":"Some module-name","required":false},"SLI-API:mode":{"type":"sync","required":false,"enum":["sync","async"]}}},"(execute-graph)input-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"(execute-graph)input-TOP","type":"object","properties":{"SLI-API:input":{"type":"object","items":{"$ref":"(execute-graph)input"}}}},"unique_empty_identifier":{},"SLI-API/test-results(config)test-result-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API/test-results(config)test-result-TOP","type":"object","properties":{"SLI-API:test-result":{"type":"array","items":{"$ref":"SLI-API/test-results(config)test-result"}}}},"SLI-API(config)sli-parameter-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API(config)sli-parameter-TOP","type":"object","properties":{"SLI-API:sli-parameter":{"type":"array","items":{"$ref":"SLI-API(config)sli-parameter"}}}},"SLI-API(operational)test-results":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API(operational)test-results","type":"object","properties":{}},"(execute-graph)output-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"(execute-graph)output-TOP","type":"object","properties":{"SLI-API:output":{"type":"object","items":{"$ref":"(execute-graph)output"}}}},"(healthcheck)output":{"$schema":"http://json-schema.org/draft-04/schema","id":"(healthcheck)output","type":"object","properties":{"SLI-API:response-code":{"type":"Some response-code","required":false},"SLI-API:ack-final-indicator":{"type":"Some ack-final-indicator","required":false},"SLI-API:context-memory-json":{"type":"Some context-memory-json","required":false},"SLI-API:response-message":{"type":"Some response-message","required":false}}},"(config)SLI-API_modulePOST":{"$schema":"http://json-schema.org/draft-04/schema","id":"(config)SLI-API_modulePOST","type":"object","properties":{"test-results":{"type":"object","items":{"$ref":"SLI-API(config)test-results"}}}},"(config)test-resultsPOST":{"$schema":"http://json-schema.org/draft-04/schema","id":"(config)test-resultsPOST","type":"object","properties":{"test-result":{"type":"array","items":{"$ref":"SLI-API/test-results(config)test-result"}}}},"SLI-API(operational)test-results-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API(operational)test-results-TOP","type":"object","properties":{"SLI-API:test-results":{"description":"Test results","type":"object","items":{"$ref":"SLI-API(operational)test-results"}}}},"SLI-API(config)test-results-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"SLI-API(config)test-results-TOP","type":"object","properties":{"SLI-API:test-results":{"description":"Test results","type":"object","items":{"$ref":"SLI-API(config)test-results"}}}},"(healthcheck)input-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"(healthcheck)input-TOP","type":"object","properties":{"SLI-API:input":{"type":"object","items":{"$ref":"(healthcheck)input"}}}},"(healthcheck)output-TOP":{"$schema":"http://json-schema.org/draft-04/schema","id":"(healthcheck)output-TOP","type":"object","properties":{"SLI-API:output":{"type":"object","items":{"$ref":"(healthcheck)output"}}}},"(config)test-resultPOST":{"$schema":"http://json-schema.org/draft-04/schema","id":"(config)test-resultPOST","type":"object","properties":{"test-identifier":{"type":"Some test-identifier","required":false}}}}}
\ No newline at end of file
+{
+ "swagger": "2.0",
+ "info": {
+ "version": "1.0.0"
+ },
+ "basePath": "/restconf",
+ "paths": {
+ "/config": {
+ "post": {
+ "consumes": [
+ "application/json",
+ "application/xml"
+ ],
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "body",
+ "name": "**(config)test-results",
+ "required": false,
+ "schema": {
+ "$ref": "#/definitions/SLI-API(config)test-results-TOP"
+ }
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(config)SLI-API_modulePOST"
+ }
+ }
+ },
+ "description": "Defines API to service logic interpreter",
+ "operationId": "POST-SLI-API_module"
+ }
+ },
+ "/config/SLI-API:test-results": {
+ "delete": {
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified"
+ }
+ },
+ "description": "Test results",
+ "operationId": "DELETE-test-results"
+ },
+ "get": {
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(config)test-results"
+ }
+ }
+ },
+ "description": "Test results",
+ "operationId": "GET-test-results"
+ },
+ "post": {
+ "consumes": [
+ "application/json",
+ "application/xml"
+ ],
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "body",
+ "name": "**(config)test-result",
+ "required": false,
+ "schema": {
+ "$ref": "#/definitions/SLI-API/test-results(config)test-result-TOP"
+ }
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(config)test-resultsPOST"
+ }
+ }
+ },
+ "description": "Test results",
+ "operationId": "POST-test-results"
+ },
+ "put": {
+ "consumes": [
+ "application/json",
+ "application/xml"
+ ],
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "body",
+ "name": "(config)test-results",
+ "required": false,
+ "schema": {
+ "$ref": "#/definitions/SLI-API(config)test-results-TOP"
+ }
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/SLI-API(config)test-results-TOP"
+ }
+ }
+ },
+ "description": "Test results",
+ "operationId": "PUT-test-results"
+ }
+ },
+ "/config/SLI-API:test-results/test-result/{test-identifier}": {
+ "delete": {
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "path",
+ "name": "test-identifier",
+ "required": true,
+ "type": "string"
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified"
+ }
+ },
+ "operationId": "DELETE-test-result"
+ },
+ "get": {
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "path",
+ "name": "test-identifier",
+ "required": true,
+ "type": "string"
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(config)test-result"
+ }
+ }
+ },
+ "operationId": "GET-test-result"
+ },
+ "put": {
+ "consumes": [
+ "application/json",
+ "application/xml"
+ ],
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "path",
+ "name": "test-identifier",
+ "required": true,
+ "type": "string"
+ },
+ {
+ "in": "body",
+ "name": "(config)test-result",
+ "required": false,
+ "schema": {
+ "$ref": "#/definitions/SLI-API/test-results(config)test-result-TOP"
+ }
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/SLI-API/test-results(config)test-result-TOP"
+ }
+ }
+ },
+ "operationId": "PUT-test-result"
+ }
+ },
+ "/operational/SLI-API:test-results": {
+ "get": {
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(operational)test-results"
+ }
+ }
+ },
+ "description": "Test results",
+ "operationId": "GET-test-results"
+ }
+ },
+ "/operations/SLI-API:execute-graph": {
+ "post": {
+ "consumes": [
+ "application/json",
+ "application/xml"
+ ],
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "parameters": [
+ {
+ "in": "body",
+ "name": "body",
+ "required": false,
+ "schema": {
+ "$ref": "#/definitions/(execute-graph)input-TOP"
+ }
+ }
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(execute-graph)output-TOP"
+ }
+ }
+ },
+ "description": " Method to add a new parameter.",
+ "operationId": "execute-graph"
+ }
+ },
+ "/operations/SLI-API:healthcheck": {
+ "post": {
+ "produces": [
+ "application/json",
+ "application/xml"
+ ],
+ "responses": {
+ "200": {
+ "description": "No response was specified",
+ "schema": {
+ "$ref": "#/definitions/(healthcheck)output-TOP"
+ }
+ }
+ },
+ "operationId": "healthcheck"
+ }
+ }
+ },
+ "definitions": {
+ "(config)SLI-API_modulePOST": {
+ "properties": {
+ "test-results": {
+ "items": {
+ "$ref": "#/definitions/SLI-API(config)test-results"
+ },
+ "type": "object"
+ }
+ },
+ "type": "object"
+ },
+ "(config)sli-parameterPOST": {
+ "properties": {
+ "boolean-value": {
+ "$ref": "#/definitions/true"
+ },
+ "int-value": {
+ "$ref": "#/definitions/-2147483648"
+ },
+ "parameter-name": {
+ "$ref": "#/definitions/Some parameter-name",
+ "description": "Parameter name"
+ },
+ "string-value": {
+ "$ref": "#/definitions/Some string-value"
+ }
+ },
+ "type": "object"
+ },
+ "(config)test-resultPOST": {
+ "properties": {
+ "test-identifier": {
+ "$ref": "#/definitions/Some test-identifier"
+ }
+ },
+ "type": "object"
+ },
+ "(config)test-resultsPOST": {
+ "properties": {
+ "test-result": {
+ "items": {
+ "$ref": "#/definitions/SLI-API/test-results(config)test-result"
+ },
+ "type": "array"
+ }
+ },
+ "type": "object"
+ },
+ "(execute-graph)input": {
+ "properties": {
+ "SLI-API:mode": {
+ "$ref": "#/definitions/sync",
+ "enum": [
+ "sync",
+ "async"
+ ]
+ },
+ "SLI-API:module-name": {
+ "$ref": "#/definitions/Some module-name"
+ },
+ "SLI-API:rpc-name": {
+ "$ref": "#/definitions/Some rpc-name"
+ },
+ "SLI-API:sli-parameter": {
+ "items": {
+ "$ref": "#/definitions/SLI-API(config)sli-parameter"
+ },
+ "type": "array"
+ }
+ },
+ "type": "object"
+ },
+ "(execute-graph)input-TOP": {
+ "properties": {
+ "SLI-API:input": {
+ "items": {
+ "$ref": "#/definitions/(execute-graph)input"
+ },
+ "type": "object"
+ }
+ },
+ "type": "object"
+ },
+ "(execute-graph)output": {
+ "properties": {
+ "SLI-API:ack-final-indicator": {
+ "$ref": "#/definitions/Some ack-final-indicator"
+ },
+ "SLI-API:context-memory-json": {
+ "$ref": "#/definitions/Some context-memory-json"
+ },
+ "SLI-API:response-code": {
+ "$ref": "#/definitions/Some response-code"
+ },
+ "SLI-API:response-message": {
+ "$ref": "#/definitions/Some response-message"
+ }
+ },
+ "type": "object"
+ },
+ "(execute-graph)output-TOP": {
+ "properties": {
+ "SLI-API:output": {
+ "items": {
+ "$ref": "#/definitions/(execute-graph)output"
+ },
+ "type": "object"
+ }
+ },
+ "type": "object"
+ },
+ "(healthcheck)output": {
+ "properties": {
+ "SLI-API:ack-final-indicator": {
+ "$ref": "#/definitions/Some ack-final-indicator"
+ },
+ "SLI-API:context-memory-json": {
+ "$ref": "#/definitions/Some context-memory-json"
+ },
+ "SLI-API:response-code": {
+ "$ref": "#/definitions/Some response-code"
+ },
+ "SLI-API:response-message": {
+ "$ref": "#/definitions/Some response-message"
+ }
+ },
+ "type": "object"
+ },
+ "(healthcheck)output-TOP": {
+ "properties": {
+ "SLI-API:output": {
+ "items": {
+ "$ref": "#/definitions/(healthcheck)output"
+ },
+ "type": "object"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API(config)sli-parameter": {
+ "properties": {
+ "SLI-API:boolean-value": {
+ "$ref": "#/definitions/true"
+ },
+ "SLI-API:int-value": {
+ "$ref": "#/definitions/-2147483648"
+ },
+ "SLI-API:parameter-name": {
+ "$ref": "#/definitions/Some parameter-name",
+ "description": "Parameter name"
+ },
+ "SLI-API:string-value": {
+ "$ref": "#/definitions/Some string-value"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API(config)sli-parameter-TOP": {
+ "properties": {
+ "SLI-API:sli-parameter": {
+ "items": {
+ "$ref": "#/definitions/SLI-API(config)sli-parameter"
+ },
+ "type": "array"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API(config)test-results": {
+ "properties": {
+ "SLI-API:test-result": {
+ "items": {
+ "$ref": "#/definitions/SLI-API/test-results(config)test-result"
+ },
+ "type": "array"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API(config)test-results-TOP": {
+ "properties": {
+ "SLI-API:test-results": {
+ "description": "Test results",
+ "items": {
+ "$ref": "#/definitions/SLI-API(config)test-results"
+ },
+ "type": "object"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API(operational)test-results": {
+ "type": "object"
+ },
+ "SLI-API(operational)test-results-TOP": {
+ "properties": {
+ "SLI-API:test-results": {
+ "description": "Test results",
+ "items": {
+ "$ref": "#/definitions/SLI-API(operational)test-results"
+ },
+ "type": "object"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API/test-results(config)test-result": {
+ "properties": {
+ "SLI-API:results": {
+ "items": {
+ "$ref": "#/definitions/Some results"
+ },
+ "type": "array"
+ },
+ "SLI-API:test-identifier": {
+ "$ref": "#/definitions/Some test-identifier"
+ }
+ },
+ "type": "object"
+ },
+ "SLI-API/test-results(config)test-result-TOP": {
+ "properties": {
+ "SLI-API:test-result": {
+ "items": {
+ "$ref": "#/definitions/SLI-API/test-results(config)test-result"
+ },
+ "type": "array"
+ }
+ },
+ "type": "object"
+ },
+ "unique_empty_identifier": {}
+ }
+}
Code Review / ccsdk / sli / core.git / commitdiff