#!/bin/bash
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
ARTIFACTPATH=${1:-/opt/tca/}
PROTO='https'
NEXUSREPO='nexus.onap.org'
-REPO='snapshots'
GROUPID='org.onap.dcaegen2.analytics.tca'
ARTIFACTID='dcae-analytics-cdap-tca'
-VERSION='2.2.0-SNAPSHOT'
-URL="${PROTO}://${NEXUSREPO}/service/local/repositories/${REPO}/content/${GROUPID//.//}/${ARTIFACTID}/${VERSION}/maven-metadata.xml"
-VT=$(wget --no-check-certificate -O- $URL | grep -m 1 \<value\> | sed -e 's/<value>\(.*\)<\/value>/\1/' | sed -e 's/ //g')
+#REPO='snapshots'
+REPO='releases'
+VERSION=''
+# if VERSION is not specified, find out the latest version
+if [ -z "$VERSION" ]; then
+ URL="${PROTO}://${NEXUSREPO}/service/local/repositories/${REPO}/content/${GROUPID//.//}/${ARTIFACTID}/maven-metadata.xml"
+ VERSION=$(wget --no-check-certificate -O- $URL | grep -m 1 \<latest\> | sed -e 's/<latest>\(.*\)<\/latest>/\1/' | sed -e 's/ //g')
+fi
+
+echo "Getting version $VERSION of $GROUPID.$ARTIFACTID from $REPO repo on $NEXUSREPO"
+
+if [ "$REPO" == "snapshots" ]; then
+ # SNOTSHOT repo container many snapshots for each version. get the newest among them
+ URL="${PROTO}://${NEXUSREPO}/service/local/repositories/${REPO}/content/${GROUPID//.//}/${ARTIFACTID}/${VERSION}/maven-metadata.xml"
+ VT=$(wget --no-check-certificate -O- $URL | grep -m 1 \<value\> | sed -e 's/<value>\(.*\)<\/value>/\1/' | sed -e 's/ //g')
+else
+ VT=${VERSION}
+fi
URL="${PROTO}://${NEXUSREPO}/service/local/repositories/${REPO}/content/${GROUPID//.//}/${ARTIFACTID}/${VERSION}/${ARTIFACTID}-${VT}.jar"
-#wget --no-check-certificate "${URL}" -O "${ARTIFACTPATH}${ARTIFACTID}-${VERSION%-SNAPSHOT}.jar"
-wget --no-check-certificate "${URL}" -O "${ARTIFACTPATH}${ARTIFACTID}.${VERSION}.jar"
+echo "Fetching $URL"
+wget --no-check-certificate "${URL}" -O "${ARTIFACTPATH}${ARTIFACTID}.${VERSION}.jar"
TCA_APPNAME='dcae-tca'
TCA_ARTIFACT='dcae-analytics-cdap-tca'
-TCA_ARTIFACT_VERSION='2.2.0-SNAPSHOT'
TCA_FILE_PATH='/opt/tca'
-TCA_JAR="${TCA_FILE_PATH}/${TCA_ARTIFACT}.${TCA_ARTIFACT_VERSION}.jar"
+TCA_JAR="$(ls -1r ${TCA_FILE_PATH}/${TCA_ARTIFACT}*.jar | head -1)"
+TCA_ARTIFACT_VERSION=$(echo "$TCA_JAR" |rev |cut -f 2-4 -d '.' |rev)
TCA_APP_CONF="${TCA_FILE_PATH}/tca_app_config.json"
TCA_CONF="${TCA_FILE_PATH}/tca_config.json"
TCA_PREF="${TCA_FILE_PATH}/tca_app_preferences.json"
TCA_PATH_ARTIFACT="${CDAP_HOST}:${CDAP_PORT}/v3/namespaces/${TCA_NAMESPACE}/artifacts"
-CONSUL_HOST=${CONSU_HOST:-consul}
-CONSUL_PORT=${CONSU_PORT:-8500}
+CONSUL_HOST=${CONSUL_HOST:-consul}
+CONSUL_PORT=${CONSUL_PORT:-8500}
CONFIG_BINDING_SERVICE=${CONFIG_BINDING_SERVICE:-config_binding_service}
CBS_SERVICE_NAME=${CONFIG_BINDING_SERVICE}
-unset CBS_HOST
-unset CBS_PORT
-until [ ! -z "$CBS_HOST" ]; do
- echo "Retrieving host and port for ${CBS_SERVICE_NAME} from ${CONSUL_HOST}:${CONSUL_PORT}"
- sleep 2
- CBS_HOST=$(curl -s "${CONSUL_HOST}:${CONSUL_PORT}/v1/catalog/service/${CBS_SERVICE_NAME}" |jq .[0].ServiceAddress |sed -e 's/\"//g')
- CBS_PORT=$(curl -s "${CONSUL_HOST}:${CONSUL_PORT}/v1/catalog/service/${CBS_SERVICE_NAME}" |jq .[0].ServicePort |sed -e 's/\"//g')
-done
-echo "Retrieved host and port for ${CBS_SERVICE_NAME} as ${CBS_HOST}:${CBS_PORT}"
-CBS_HOST=${CBS_HOST:-config-binding-service}
-CBS_PORT=${CBS_PORT:-10000}
-
#Changing to HOSTNAME parameter for consistency with k8s deploy
MY_NAME=${HOSTNAME:-tca}
-echo "TCA environment: I am ${MY_NAME}, consul at ${CONSUL_HOST}:${CONSUL_PORT}, CBS at ${CBS_HOST}:${CBS_PORT}, service name ${CBS_SERVICE_NAME}"
-
echo "Generting preference file"
sed -i 's/{{DMAAPHOST}}/'"${DMAAPHOST}"'/g' ${TCA_PREF}
sed -i 's/{{DMAAPSUBID}}/c12/g' ${TCA_PREF}
sed -i 's/{{AAIHOST}}/'"${AAIHOST}"'/g' ${TCA_PREF}
sed -i 's/{{AAIPORT}}/'"${AAIPORT}"'/g' ${TCA_PREF}
-if [ -z $REDISHOSTPORT ]; then
+if [ -z "$REDISHOSTPORT" ]; then
sed -i 's/{{REDISHOSTPORT}}/NONE/g' ${TCA_PREF}
sed -i 's/{{REDISCACHING}}/false/g' ${TCA_PREF}
else
function tca_poll_policy {
- MY_NAME=${HOSTNAME:-tca}
-
URL0="${CBS_HOST}:${CBS_PORT}/service_component_all/${MY_NAME}"
- echo "tca_poll_policy: Retrieving configuration file at ${URL0}"
+ echo "tca_poll_policy: Retrieving all-in-one config at ${URL0}"
HTTP_RESPONSE=$(curl --silent --write-out "HTTPSTATUS:%{http_code}" "$URL0")
- HTTP_BODY=$(echo $HTTP_RESPONSE | sed -e 's/HTTPSTATUS\:.*//g')
- HTTP_STATUS=$(echo $HTTP_RESPONSE | tr -d '\n' | sed -e 's/.*HTTPSTATUS://')
+ HTTP_BODY=$(echo "$HTTP_RESPONSE" | sed -e 's/HTTPSTATUS\:.*//g')
+ HTTP_STATUS=$(echo "$HTTP_RESPONSE" | tr -d '\n' | sed -e 's/.*HTTPSTATUS://')
if [ "$HTTP_STATUS" != "200" ]; then
+ echo "tca_poll_policy: Retrieving all-in-one config failed with status $HTTP_STATUS"
URL1="${CBS_HOST}:${CBS_PORT}/service_component/${MY_NAME}"
- echo "tca_poll_policy: Retrieving configuration file at ${URL1}"
+ echo "tca_poll_policy: Retrieving app config only at ${URL1}"
HTTP_RESPONSE1=$(curl --silent --write-out "HTTPSTATUS:%{http_code}" "$URL1")
- HTTP_BODY1=$(echo $HTTP_RESPONSE1 | sed -e 's/HTTPSTATUS\:.*//g')
- HTTP_STATUS1=$(echo $HTTP_RESPONSE1 | tr -d '\n' | sed -e 's/.*HTTPSTATUS://')
+ HTTP_BODY1=$(echo "$HTTP_RESPONSE1" | sed -e 's/HTTPSTATUS\:.*//g')
+ HTTP_STATUS1=$(echo "$HTTP_RESPONSE1" | tr -d '\n' | sed -e 's/.*HTTPSTATUS://')
if [ "$HTTP_STATUS1" != "200" ]; then
- echo "receiving $HTTP_RESPONSE1 from CBS"
+ echo "tca_poll_policy: Retrieving app config only failed with status $HTTP_STATUS1"
return
fi
URL2="$URL1:preferences"
- echo "tca_poll_policy: Retrieving preferences file at ${URL1}"
+ echo "tca_poll_policy: Retrieving app preferences only at ${URL2}"
HTTP_RESPONSE2=$(curl --silent --write-out "HTTPSTATUS:%{http_code}" "$URL2")
- HTTP_BODY2=$(echo $HTTP_RESPONSE2 | sed -e 's/HTTPSTATUS\:.*//g')
- HTTP_STATUS2=$(echo $HTTP_RESPONSE2 | tr -d '\n' | sed -e 's/.*HTTPSTATUS://')
+ HTTP_BODY2=$(echo "$HTTP_RESPONSE2" | sed -e 's/HTTPSTATUS\:.*//g')
+ HTTP_STATUS2=$(echo "$HTTP_RESPONSE2" | tr -d '\n' | sed -e 's/.*HTTPSTATUS://')
if [ "$HTTP_STATUS2" != "200" ]; then
- echo "receiving $HTTP_RESPONSE2 from CBS"
+ echo "tca_poll_policy: Retrieving app preferences only failed with status $HTTP_STATUS2"
+ return
+ fi
+
+ if [[ "$CONFIG" == "null" || "$PREF" == "null" ]]; then
+ echo "tca_poll_policy: either app config or app preferences being empty, config not applicable"
return
fi
- echo $HTTP_BODY1 | jq . --sort-keys > "${TCA_CONF_TEMP}"
- echo $HTTP_BODY2 | jq . --sort-keys > "${TCA_PREF_TEMP}"
+ echo "$HTTP_BODY1" | jq . --sort-keys > "${TCA_CONF_TEMP}"
+ echo "$HTTP_BODY2" | jq . --sort-keys > "${TCA_PREF_TEMP}"
else
- CONFIG=$(echo $HTTP_BODY | jq .config.app_config)
- PREF=$(echo $HTTP_BODY | jq .config.app_preferences)
- POLICY=$(echo $HTTP_BODY | jq .policies.items[0].config.content.tca_policy)
+ CONFIG=$(echo "$HTTP_BODY" | jq .config.app_config)
+ PREF=$(echo "$HTTP_BODY" | jq .config.app_preferences)
+ POLICY=$(echo "$HTTP_BODY" | jq .policies.items[0].config.content.tca_policy)
- ## Check if policy content under tca_policy is returned null
- ## null indicates no active policy flow; hence use configuration loaded
- ## from blueprint
- if [ $POLICY==null ]; then
- # tca_policy through blueprint
- NEWPREF=${PREF}
+ if [[ "$CONFIG" == "null" || "$PREF" == "null" ]]; then
+ echo "tca_poll_policy: CONFIG received is parsed to be empty, trying to parse using R1 format"
+ CONFIG=$(echo "$HTTP_BODY" | jq .config)
+ NEWPREF=$(echo "$HTTP_BODY" | jq .preferences)
+
+ #echo "CONFIG is [$CONFIG]"
+ #echo "NEWPREF is [$NEWPREF]"
else
- # tca_policy through active policy flow through PH
- NEWPREF=$(echo $PREF | jq --arg tca_policy "$POLICY" '. + {$tca_policy}')
+ echo "tca_poll_policy: CONFIG is [${CONFIG}], PREF is [${PREF}], POLICY is [${POLICY}]"
+ ## Check if policy content under tca_policy is returned null
+ ## null indicates no active policy flow; hence use configuration loaded
+ ## from blueprint
+ if [ "$POLICY" == "null" ]; then
+ # tca_policy through blueprint
+ NEWPREF=${PREF}
+ else
+ # tca_policy through active policy flow through PH
+ NEWPREF=$(echo "$PREF" | jq --arg tca_policy "$POLICY" '. + {$tca_policy}')
+ fi
+ NEWPREF=$(echo "$NEWPREF" | sed 's/\\n//g')
+ fi
+
+ if [[ "$CONFIG" == "null" || "$NEWPREF" == "null" ]]; then
+ echo "tca_poll_policy: either app config or app preferences being empty, config not applicable"
+ return
fi
- NEWPREF=$(echo $NEWPREF | sed 's/\\n//g')
- echo $CONFIG | jq . --sort-keys > "${TCA_CONF_TEMP}"
- echo $NEWPREF | jq . --sort-keys > "${TCA_PREF_TEMP}"
+
+ echo "$CONFIG" | jq . --sort-keys > "${TCA_CONF_TEMP}"
+ echo "$NEWPREF" | jq . --sort-keys > "${TCA_PREF_TEMP}"
fi
if [ ! -e "${TCA_CONF_TEMP}" ] || [ "$(ls -sh ${TCA_CONF_TEMP} |cut -f1 -d' ' |sed -e 's/[^0-9]//g')" -lt "1" ]; then
CONSUMERID=$(jq .subscriberConsumerId ${TCA_PREF_TEMP} |sed -e 's/\"//g')
if ! (echo "$CONSUMERID" |grep "$HOSTID"); then
CONSUMERID="${CONSUMERID}-${HOSTID}"
- jq --arg CID ${CONSUMERID} '.subscriberConsumerId = $CID' < "${TCA_PREF_TEMP}" > "${TCA_PREF_TEMP}2"
+ jq --arg CID "${CONSUMERID}" '.subscriberConsumerId = $CID' < "${TCA_PREF_TEMP}" > "${TCA_PREF_TEMP}2"
mv "${TCA_PREF_TEMP}2" "${TCA_PREF_TEMP}"
fi
if ! diff ${TCA_PREF} ${TCA_PREF_TEMP} ; then
PERF_CHANGED=1
fi
- if [[ "$PERF_CHANGED" == "1" || "$CONF_CHANGED" == "1" ]]; then
+ if [[ "$PERF_CHANGED" == "1" || "$CONF_CHANGED" == "1" ]]; then
+ echo "Newly received configuration/preference differ from the running instance's. reload confg"
tca_stop
tca_delete
tca_load_artifact
export PATH=${PATH}:/opt/cdap/sdk/bin
-# starting CDAP SDK in background
-cdap sdk start
+echo "Starting TCA-CDAP in standalone mode"
+# starting CDAP SDK in background
+cdap sdk start
-echo "Waiting CDAP ready on port 11015 ..."
+echo "Started, waiting CDAP ready on port 11015 ..."
while ! nc -z ${CDAP_HOST} ${CDAP_PORT}; do
sleep 0.1 # wait for 1/10 of the second before check again
done
-echo "CDAP has started"
-
echo "Creating namespace cdap_tca_hi_lo ..."
curl -s -X PUT "http://${CDAP_HOST}:${CDAP_PORT}/v3/namespaces/cdap_tca_hi_lo"
-
# stop programs
tca_stop
-
# delete application
tca_delete
-
# load artifact
tca_load_artifact
tca_load_conf
-
# start programs
tca_start
-
# get status of programs
tca_status
+echo "TCA-CDAP standalone mode initialization completed"
+
-while echo -n
+#Changing to HOSTNAME parameter for consistency with k8s deploy
+MY_NAME=${HOSTNAME:-tca}
+
+unset CBS_HOST
+unset CBS_PORT
+echo "TCA environment: I am ${MY_NAME}, consul at ${CONSUL_HOST}:${CONSUL_PORT}, CBS service name ${CBS_SERVICE_NAME}"
+
+while echo
do
- echo "======================================================"
- date
- tca_poll_policy
+ echo "$(date): ======================================================"
+ if [[ -z "$CBS_HOST" || -z "$CBS_PORT" ]]; then
+ echo "Retrieving host and port for ${CBS_SERVICE_NAME} from ${CONSUL_HOST}:${CONSUL_PORT}"
+ sleep 2
+ CBS_HOST=$(curl -s "${CONSUL_HOST}:${CONSUL_PORT}/v1/catalog/service/${CBS_SERVICE_NAME}" |jq .[0].ServiceAddress |sed -e 's/\"//g')
+ CBS_PORT=$(curl -s "${CONSUL_HOST}:${CONSUL_PORT}/v1/catalog/service/${CBS_SERVICE_NAME}" |jq .[0].ServicePort |sed -e 's/\"//g')
+ echo "CBS discovered to be at ${CBS_HOST}:${CBS_PORT}"
+ fi
+
+ if [ ! -z "$CBS_HOST" ] && [ ! -z "$CBS_PORT" ]; then
+ tca_poll_policy
+ fi
sleep 30
done
Code Review / dcaegen2 / deployments.git / commitdiff