X-Git-Url: https://gerrit.onap.org/r/gitweb?a=blobdiff_plain;f=platform-logic%2Fgeneric-resource-api%2Fsrc%2Fmain%2Fxml%2FGENERIC-RESOURCE-API_vf-module-topology-operation-deactivate.xml;h=788f0a9623e4fcb5c164954e883231e89d86dac4;hb=refs%2Fheads%2Fmaster;hp=260f622b7b9b3a9d8f43f3cbcad14080f8cb4152;hpb=8f255495fab500e9da54bd1cc10d645600dd14ce;p=sdnc%2Foam.git

diff --git a/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_vf-module-topology-operation-deactivate.xml b/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_vf-module-topology-operation-deactivate.xml
index 260f622b..788f0a96 100755
--- a/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_vf-module-topology-operation-deactivate.xml
+++ b/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_vf-module-topology-operation-deactivate.xml
@@ -1,95 +1,177 @@
-<service-logic xmlns='http://www.onap.org/sdnc/svclogic' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='GENERIC-RESOURCE-API' version='${project.version}'><method rpc='vf-module-topology-operation-deactivate' mode='sync'>
-<block atomic="true"><switch test='`$vf-module-topology-operation-input.request-information.request-action`'>
-<outcome value='DeleteVfModuleInstance'>
-<block>
-</block></outcome><outcome value='Other'>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="If svc-action is 'deactivate' then request-action must be 'DeleteVfModuleInstance'" />
-</return></outcome></switch><set>
-<parameter name='vnf-index' value='-1' />
-</set><switch test='`$service-data.vnfs.vnf_length`'>
-<outcome value=''>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="There are no VNFs defined in MD-SAL" />
-</return></outcome><outcome value='Other'>
-<for index='idx' start='0' end='`$service-data.vnfs.vnf_length`' >
-<switch test='`$service-data.vnfs.vnf[$idx].vnf-id == $vf-module-topology-operation-input.vnf-information.vnf-id`'>
-<outcome value='true'>
-<block>
-<set>
-<parameter name='vnf-index' value='`$idx`' />
-</set><break/></block></outcome></switch></for></outcome></switch><switch test='`$vnf-index`'>
-<outcome value='-1'>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="`'Unable to find VNF ID ' + $vf-module-topology-operation-input.vnf-information.vnf-id + ' in MD-SAL'`" />
-</return></outcome></switch><set>
-<parameter name='vf-module-index' value='-1' />
-</set><switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`'>
-<outcome value=''>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="`'There are no VF modules defined in MD-SAL for VNF ' + $vf-module-topology-operation-input.vnf-information.vnf-id`" />
-</return></outcome><outcome value='Other'>
-<for index='idx' start='0' end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`' >
-<switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$idx].vf-module-id == $vf-module-topology-operation-input.vf-module-information.vf-module-id`'>
-<outcome value='true'>
-<block>
-<set>
-<parameter name='vf-module-index' value='`$idx`' />
-</set><break/></block></outcome></switch></for></outcome></switch><switch test='`$vf-module-index`'>
-<outcome value='-1'>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="`'Unable to find VF module ID ' + $vf-module-topology-operation-input.vf-module-information.vf-module-id + ' in MD-SAL'`" />
-</return></outcome></switch><set>
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-topology.vf-module-assignments.vf-module-status' value='PendingDelete' />
-</set><update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+<service-logic
+    xmlns='http://www.onap.org/sdnc/svclogic'
+    xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='GENERIC-RESOURCE-API' version='${project.version}'>
+    <method rpc='vf-module-topology-operation-deactivate' mode='sync'>
+        <block atomic="true">
+            <switch test='`$vf-module-topology-operation-input.request-information.request-action`'>
+                <outcome value='DeleteVfModuleInstance'>
+                    <block></block>
+                </outcome>
+                <outcome value='Other'>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="If svc-action is 'deactivate' then request-action must be 'DeleteVfModuleInstance'" />
+                    </return>
+                </outcome>
+            </switch>
+            <set>
+                <parameter name='vnf-index' value='-1' />
+            </set>
+            <switch test='`$service-data.vnfs.vnf_length`'>
+                <outcome value=''>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="There are no VNFs defined in MD-SAL" />
+                    </return>
+                </outcome>
+                <outcome value='Other'>
+                    <for index='idx' start='0' end='`$service-data.vnfs.vnf_length`' >
+                        <switch test='`$service-data.vnfs.vnf[$idx].vnf-id == $vf-module-topology-operation-input.vnf-information.vnf-id`'>
+                            <outcome value='true'>
+                                <block>
+                                    <set>
+                                        <parameter name='vnf-index' value='`$idx`' />
+                                    </set>
+                                    <break/>
+                                </block>
+                            </outcome>
+                        </switch>
+                    </for>
+                </outcome>
+            </switch>
+            <switch test='`$vnf-index`'>
+                <outcome value='-1'>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="`'Unable to find VNF ID ' + $vf-module-topology-operation-input.vnf-information.vnf-id + ' in MD-SAL'`" />
+                    </return>
+                </outcome>
+            </switch>
+            <set>
+                <parameter name='vf-module-index' value='-1' />
+            </set>
+            <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`'>
+                <outcome value=''>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="`'There are no VF modules defined in MD-SAL for VNF ' + $vf-module-topology-operation-input.vnf-information.vnf-id`" />
+                    </return>
+                </outcome>
+                <outcome value='Other'>
+                    <for index='idx' start='0' end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`' >
+                        <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$idx].vf-module-id == $vf-module-topology-operation-input.vf-module-information.vf-module-id`'>
+                            <outcome value='true'>
+                                <block>
+                                    <set>
+                                        <parameter name='vf-module-index' value='`$idx`' />
+                                    </set>
+                                    <break/>
+                                </block>
+                            </outcome>
+                        </switch>
+                    </for>
+                </outcome>
+            </switch>
+            <switch test='`$vf-module-index`'>
+                <outcome value='-1'>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="`'Unable to find VF module ID ' + $vf-module-topology-operation-input.vf-module-information.vf-module-id + ' in MD-SAL'`" />
+                    </return>
+                </outcome>
+            </switch>
+            <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vlan-vnfc-instance-groups.vlan-vnfc-instance-group_length`'>
+                <outcome value=''>
+                    <block></block>
+                </outcome>
+                <outcome value='0'>
+                    <block></block>
+                </outcome>
+                <outcome value='Other'>
+                    <call module='GENERIC-RESOURCE-API' rpc='vf-module-topology-vlan-tagging-deactivate' mode='sync' >
+                        <outcome value='failure'>
+                            <return status='failure'></return>
+                        </outcome>
+                    </call>
+                </outcome>
+            </switch>
+            <for silentFailure='true' index='vm-type-index' start='0'
+  end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm_length`' >
+                <for silentFailure='true' index='vnfc-index' start='0' end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vnfc-names_length`' >
+                    <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
+   resource="vnfc"
+   key="vnfc.vnfc-name = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vnfc-names[$vnfc-index].vnfc-name"
+   force="true" pfx="tmp.AnAI-data">
+                        <parameter name="orchestration-status" value="PendingDelete" />
+                        <outcome value='failure'>
+                            <return status='failure'>
+                                <parameter name='ack-final' value='Y'/>
+                                <parameter name="error-code" value="500" />
+                                <parameter name="error-message" value="Error updating vnfc in AAI" />
+                            </return>
+                        </outcome>
+                        <outcome value='not-found'>
+                            <return status='failure'>
+                                <parameter name='ack-final' value='Y'/>
+                                <parameter name="error-code" value="500" />
+                                <parameter name="error-message" value="`'No vnfc found in AAI for vnfc name ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vnfc-names[$vnfc-index].vnfc-name`" />
+                            </return>
+                        </outcome>
+                    </update>
+                </for>
+            </for>
+            <set>
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-topology.vf-module-assignments.vf-module-status' value='PendingDelete' />
+            </set>
+            <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"
    resource="vf-module"
    key="vf-module.vf-module-id = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id
       AND generic-vnf.vnf-id = $service-data.vnfs.vnf[$vnf-index].vnf-id"
    force="true" pfx="tmp.AnAI-data">
-<parameter name="orchestration-status" value="PendingDelete" />
-<outcome value='failure'>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="Error updating vf-module in AAI" />
-</return></outcome><outcome value='not-found'>
-<return status='failure'>
-	<parameter name='ack-final' value='Y'/>
-	<parameter name="error-code" value="500" />
-    <parameter name="error-message" value="`'No vf-module found in AAI for vf module ID ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id`" />
-</return></outcome></update><set>
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.sdnc-request-header.'
+                <parameter name="orchestration-status" value="PendingDelete" />
+                <outcome value='failure'>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="Error updating vf-module in AAI" />
+                    </return>
+                </outcome>
+                <outcome value='not-found'>
+                    <return status='failure'>
+                        <parameter name='ack-final' value='Y'/>
+                        <parameter name="error-code" value="500" />
+                        <parameter name="error-message" value="`'No vf-module found in AAI for vf module ID ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id`" />
+                    </return>
+                </outcome>
+            </update>
+            <set>
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.sdnc-request-header.'
    value='$vf-module-topology-operation-input.sdnc-request-header.' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.request-information.'
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.request-information.'
    value='$vf-module-topology-operation-input.request-information.' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.service-information.'
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.service-information.'
    value='$vf-module-topology-operation-input.service-information.' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vnf-information.'
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vnf-information.'
    value='$vf-module-topology-operation-input.vnf-information.' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-information.'
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-information.'
    value='$vf-module-topology-operation-input.vf-module-information.' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-request-input.'
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-request-input.'
    value='$vf-module-topology-operation-input.vf-module-request-input.' />
-
-</set><set>
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.order-status'
+            </set>
+            <set>
+                <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.order-status'
   value='PendingDelete' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.last-rpc-action'
-  value='`$vf-module-topology-operation-input.sdnc-request-header.svc-action`' />
-<parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.last-action'
-  value='`$vf-module-topology-operation-input.request-information.request-action`' />
-</set><return status='success'>
-<parameter name="ack-final-indicator" value="Y" />
-<parameter name="error-code" value="200" />
-<parameter name="error-message" value="`$error-message`" />
-</return></block></method></service-logic>
+            </set>
+            <return status='success'>
+                <parameter name="ack-final-indicator" value="Y" />
+                <parameter name="error-code" value="200" />
+                <parameter name="error-message" value="`$error-message`" />
+            </return>
+        </block>
+    </method>
+</service-logic>
\ No newline at end of file