X-Git-Url: https://gerrit.onap.org/r/gitweb?a=blobdiff_plain;f=platform-logic%2Fgeneric-resource-api%2Fsrc%2Fmain%2Fxml%2FGENERIC-RESOURCE-API_dci-connects-network-topology-operation-activate.xml;h=411cbb385895e39cd5e99f3551f27df23f97581a;hb=d42a3fda591af1697bf3bc76067a2b6d85333215;hp=617073b4e2786c9ab8503da6d12755153824a5e5;hpb=94d275c0b63b7a8d4e88303776edcbd82e681b8d;p=sdnc%2Foam.git

diff --git a/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_dci-connects-network-topology-operation-activate.xml b/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_dci-connects-network-topology-operation-activate.xml
index 617073b4..411cbb38 100644
--- a/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_dci-connects-network-topology-operation-activate.xml
+++ b/platform-logic/generic-resource-api/src/main/xml/GENERIC-RESOURCE-API_dci-connects-network-topology-operation-activate.xml
@@ -1,314 +1,482 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<service-logic xmlns="http://www.onap.org/sdnc/svclogic" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.onap.org/sdnc/svclogic ./svclogic.xsd" module="GENERIC-RESOURCE-API" version="${project.version}">
-    <method rpc="network-topology-operation-activate" mode="sync">
-        <block atomic="true">
-            <call module="GENERIC-RESOURCE-API" rpc="validate-network-input-parameters" mode="sync" />
-            <block atomic="true">
-                <block atomic="true">
-                    <for index="idx" start="0" end="`$network-topology-operation-input.network-request-input.network-input-parameters.param_length`">
-                        <block>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'name'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.name" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_id'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_description'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.description" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_networkName'`">
-                                <outcome value="true" />
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_routerId'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.router_id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_importRT1'`">
-                                <outcome value="true">
-                                    <block atomic="true">
-                                        <set>
-                                            <parameter name="tmp.dci-connects.evpn_irts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                        </set>
-                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
-                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_irts.original`" />
-                                            <parameter name="regex" value="," />
-                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_irts" />
-                                            <outcome value="success">
-                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_irts_length`">
-                                                    <set>
-                                                        <parameter name="prop.dci-connects.evpn_irts[$idx]" value="`$tmp.dci-connects.evpn_irts[$idx]`" />
-                                                    </set>
-                                                </for>
-                                            </outcome>
-                                            <outcome value="failure">
-                                                <return status="failure">
-                                                    <parameter name="error-code" value="" />
-                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
-                                                </return>
-                                            </outcome>
-                                        </execute>
-                                    </block>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_exportRT1'`">
-                                <outcome value="true">
-                                    <block atomic="true">
-                                        <set>
-                                            <parameter name="tmp.dci-connects.evpn_erts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                        </set>
-                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
-                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_erts.original`" />
-                                            <parameter name="regex" value="," />
-                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_erts" />
-                                            <outcome value="success">
-                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_erts_length`">
-                                                    <set>
-                                                        <parameter name="prop.dci-connects.evpn_erts[$idx]" value="`$tmp.dci-connects.evpn_erts[$idx]`" />
-                                                    </set>
-                                                </for>
-                                            </outcome>
-                                            <outcome value="failure">
-                                                <return status="failure">
-                                                    <parameter name="error-code" value="" />
-                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
-                                                </return>
-                                            </outcome>
-                                        </execute>
-                                    </block>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_vni'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.vni" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'tunnelType'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.tunnelType" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                        </block>
-                    </for>
-                    <block atomic="true">
-                        <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="esr-thirdparty-sdnc" key="esr-thirdparty-sdnc.thirdparty-sdnc-id = $prop.dci-connects.id AND         depth = '1'" pfx="tmp.aai.esr-thirdparty-sdnc" local-only="false">
-                            <outcome value="success">
-                                <block atomic="true" />
-                            </outcome>
-                            <outcome value="not-found">
-                                <return status="failure">
-                                    <parameter name="error-code" value="" />
-                                    <parameter name="error-message" value="" />
-                                </return>
-                            </outcome>
-                            <outcome value="Other">
-                                <return status="failure">
-                                    <parameter name="error-code" value="" />
-                                    <parameter name="error-message" value="" />
-                                </return>
-                            </outcome>
-                        </get-resource>
-                        <set>
-                            <parameter name="prop.sdncRestApi.thirdpartySdnc.url" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list[0].esr-system-info.serviceUrl`" />
-                            <parameter name="prop.sdncRestApi.templateDir" value="/opt/onap/sdnc/data" />
-                            <parameter name="prop.sdncRestApi.thirdpartySdnc.user" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list[0].esr-system-info.user-name`" />
-                            <parameter name="prop.sdncRestApi.thirdpartySdnc.password" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list[0].esr-system-info.password`" />
-                        </set>
-                        <switch test="`$prop.dci-connects.tunnelType`">
-                            <outcome value="L3-DCI">
-                                <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
-                                    <parameter name="templateFileName" value="$prop.sdncRestApi.tempDir +'/l3-dci-connects-template.json'" />
-                                    <parameter name="restapiUrl" value="$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l3-dci-connects'" />
-                                    <parameter name="restapiUser" value="$prop.sdncRestApi.thirdpartySdnc.user" />
-                                    <parameter name="restapiPassword" value="$prop.sdncRestApi.thirdpartySdnc.password" />
-                                    <parameter name="format" value="json" />
-                                    <parameter name="httpMethod" value="post" />
-                                    <parameter name="responsePrefix" value="restapi-result" />
-                                </execute>
-                            </outcome>
-                            <outcome value="L2-DCI">
-                                <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
-                                    <parameter name="templateFileName" value="$prop.sdncRestApi.tempDir +'/l2-dci-connects-template.json'" />
-                                    <parameter name="restapiUrl" value="$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l2-dci-connects'" />
-                                    <parameter name="restapiUser" value="$prop.sdncRestApi.thirdpartySdnc.user" />
-                                    <parameter name="restapiPassword" value="$prop.sdncRestApi.thirdpartySdnc.password" />
-                                    <parameter name="format" value="json" />
-                                    <parameter name="httpMethod" value="post" />
-                                    <parameter name="responsePrefix" value="restapi-result" />
-                                </execute>
-                            </outcome>
-                        </switch>
-                    </block>
-                </block>
-                <block atomic="true">
-                    <for index="idx" start="0" end="`$network-topology-operation-input.network-request-input.network-input-parameters.param_length`">
-                        <block>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_id'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_description'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.description" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                                <outcome value="false">
-                                    <set>
-                                        <parameter name="prop.dci-connects.description" value="" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_networkName'`">
-                                <outcome value="true" />
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_routerId'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.router_id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_importRT1'`">
-                                <outcome value="true">
-                                    <block atomic="true">
-                                        <set>
-                                            <parameter name="tmp.dci-connects.evpn_irts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                        </set>
-                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
-                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_irts.original`" />
-                                            <parameter name="regex" value="," />
-                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_irts" />
-                                            <outcome value="success">
-                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_irts_length`">
-                                                    <set>
-                                                        <parameter name="prop.dci-connects.evpn_irts[$idx]" value="`$tmp.dci-connects.evpn_irts[$idx]`" />
-                                                    </set>
-                                                </for>
-                                            </outcome>
-                                            <outcome value="failure">
-                                                <return status="failure">
-                                                    <parameter name="error-code" value="" />
-                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
-                                                </return>
-                                            </outcome>
-                                        </execute>
-                                    </block>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_exportRT1'`">
-                                <outcome value="true">
-                                    <block atomic="true">
-                                        <set>
-                                            <parameter name="tmp.dci-connects.evpn_erts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                        </set>
-                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
-                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_erts.original`" />
-                                            <parameter name="regex" value="," />
-                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_erts" />
-                                            <outcome value="success">
-                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_erts_length`">
-                                                    <set>
-                                                        <parameter name="prop.dci-connects.evpn_erts[$idx]" value="`$tmp.dci-connects.evpn_erts[$idx]`" />
-                                                    </set>
-                                                </for>
-                                            </outcome>
-                                            <outcome value="failure">
-                                                <return status="failure">
-                                                    <parameter name="error-code" value="" />
-                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
-                                                </return>
-                                            </outcome>
-                                        </execute>
-                                    </block>
-                                </outcome>
-                            </switch>
-                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_vni'`">
-                                <outcome value="true">
-                                    <set>
-                                        <parameter name="prop.dci-connects.vni" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
-                                    </set>
-                                </outcome>
-                            </switch>
-                        </block>
-                    </for>
-                    <block atomic="true">
-                        <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="esr-thirdparty-sdnc" key="esr-thirdparty-sdnc.thirdparty-sdnc-id = $prop.dci-connects.id AND         depth = '1'" pfx="tmp.aai.esr-thirdparty-sdnc" local-only="false">
-                            <outcome value="success">
-                                <block atomic="true" />
-                            </outcome>
-                            <outcome value="not-found">
-                                <return status="failure">
-                                    <parameter name="error-code" value="" />
-                                    <parameter name="error-message" value="" />
-                                </return>
-                            </outcome>
-                            <outcome value="Other">
-                                <return status="failure">
-                                    <parameter name="error-code" value="" />
-                                    <parameter name="error-message" value="" />
-                                </return>
-                            </outcome>
-                        </get-resource>
-                        <set>
-                            <parameter name="prop.sdncRestApi.thirdpartySdnc.url" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list[0].esr-system-info.serviceUrl`" />
-                            <parameter name="prop.sdncRestApi.templateDir" value="/opt/onap/sdnc/data" />
-                            <parameter name="prop.sdncRestApi.thirdpartySdnc.user" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list[0].esr-system-info.user-name`" />
-                            <parameter name="prop.sdncRestApi.thirdpartySdnc.password" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list[0].esr-system-info.password`" />
-                        </set>
-                        <switch test="`$prop.dci-connects.tunnelType`">
-                            <outcome value="L3-DCI">
-                                <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
-                                    <parameter name="templateFileName" value="$prop.sdncRestApi.tempDir +'/l3-dci-connects-template.json'" />
-                                    <parameter name="restapiUrl" value="$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l3-dci-connects'" />
-                                    <parameter name="restapiUser" value="$prop.sdncRestApi.thirdpartySdnc.user" />
-                                    <parameter name="restapiPassword" value="$prop.sdncRestApi.thirdpartySdnc.password" />
-                                    <parameter name="format" value="json" />
-                                    <parameter name="httpMethod" value="post" />
-                                    <parameter name="responsePrefix" value="restapi-result" />
-                                </execute>
-                            </outcome>
-                            <outcome value="L2-DCI">
-                                <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
-                                    <parameter name="templateFileName" value="$prop.sdncRestApi.tempDir +'/l2-dci-connects-template.json'" />
-                                    <parameter name="restapiUrl" value="$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l2-dci-connects'" />
-                                    <parameter name="restapiUser" value="$prop.sdncRestApi.thirdpartySdnc.user" />
-                                    <parameter name="restapiPassword" value="$prop.sdncRestApi.thirdpartySdnc.password" />
-                                    <parameter name="format" value="json" />
-                                    <parameter name="httpMethod" value="post" />
-                                    <parameter name="responsePrefix" value="restapi-result" />
-                                </execute>
-                            </outcome>
-                        </switch>
-                    </block>
-                </block>
-            </block>
-            <return status="success">
-                <parameter name="ack-final-indicator" value="Y" />
-                <parameter name="error-code" value="200" />
-                <parameter name="error-message" value="`$error-message`" />
-            </return>
-        </block>
-    </method>
-</service-logic>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<service-logic xmlns="http://www.onap.org/sdnc/svclogic" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.onap.org/sdnc/svclogic ./svclogic.xsd" module="GENERIC-RESOURCE-API" version="${project.version}">
+    <method rpc="dci-connects-network-topology-operation-activate" mode="sync">
+        <block atomic="true">
+            <call module="GENERIC-RESOURCE-API" rpc="validate-network-input-parameters" mode="sync" />
+            <block atomic="true">
+                <block atomic="true">
+                    <for index="idx" start="0" end="`$network-topology-operation-input.network-request-input.network-input-parameters.param_length`">
+                        <block>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'name'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.name" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_id'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_description'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.description" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_networkName'`">
+                                <outcome value="true">
+                                    <block atomic="true">
+                                        <set>
+                                            <parameter name="tmp.dci-connects.local_networks.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                        </set>
+                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
+                                            <parameter name="original_string" value="`$tmp.dci-connects.local_networks.original`" />
+                                            <parameter name="regex" value="," />
+                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.local_networks" />
+                                            <outcome value="success">
+                                                <for index="idx" start="0" end="`$tmp.dci-connects.local_networks_length`">
+                                                    <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="l3-network" key="l3-network.network-name = $tmp.dci-connects.local_networks[$idx] AND         depth = '0'" pfx="tmp.aai.l3-network" local-only="false">
+                                                        <outcome value="success">
+                                                            <set>
+                                                                <parameter name="prop.dci-connects.local_networks[$idx]" value="`$tmp.aai.l3-network.network-id`" />
+                                                            </set>
+                                                        </outcome>
+                                                        <outcome value="not-found">
+                                                            <return status="failure">
+                                                                <parameter name="error-code" value="" />
+                                                                <parameter name="error-message" value="" />
+                                                            </return>
+                                                        </outcome>
+                                                        <outcome value="Other">
+                                                            <return status="failure">
+                                                                <parameter name="error-code" value="" />
+                                                                <parameter name="error-message" value="" />
+                                                            </return>
+                                                        </outcome>
+                                                    </get-resource>
+                                                </for>
+                                            </outcome>
+                                            <outcome value="failure">
+                                                <return status="failure">
+                                                    <parameter name="error-code" value="" />
+                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
+                                                </return>
+                                            </outcome>
+                                        </execute>
+                                    </block>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_routerId'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.router_id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_importRT1'`">
+                                <outcome value="true">
+                                    <block atomic="true">
+                                        <set>
+                                            <parameter name="tmp.dci-connects.evpn_irts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                        </set>
+                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
+                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_irts.original`" />
+                                            <parameter name="regex" value="," />
+                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_irts" />
+                                            <outcome value="success">
+                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_irts_length`">
+                                                    <set>
+                                                        <parameter name="prop.dci-connects.evpn_irts[$idx]" value="`$tmp.dci-connects.evpn_irts[$idx]`" />
+                                                    </set>
+                                                </for>
+                                            </outcome>
+                                            <outcome value="failure">
+                                                <return status="failure">
+                                                    <parameter name="error-code" value="" />
+                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
+                                                </return>
+                                            </outcome>
+                                        </execute>
+                                    </block>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_exportRT1'`">
+                                <outcome value="true">
+                                    <block atomic="true">
+                                        <set>
+                                            <parameter name="tmp.dci-connects.evpn_erts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                        </set>
+                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
+                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_erts.original`" />
+                                            <parameter name="regex" value="," />
+                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_erts" />
+                                            <outcome value="success">
+                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_erts_length`">
+                                                    <set>
+                                                        <parameter name="prop.dci-connects.evpn_erts[$idx]" value="`$tmp.dci-connects.evpn_erts[$idx]`" />
+                                                    </set>
+                                                </for>
+                                            </outcome>
+                                            <outcome value="failure">
+                                                <return status="failure">
+                                                    <parameter name="error-code" value="" />
+                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
+                                                </return>
+                                            </outcome>
+                                        </execute>
+                                    </block>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site1_vni'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.vni" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'tunnelType'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.tunnelType" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                        </block>
+                    </for>
+                    <block atomic="true">
+                        <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="esr-thirdparty-sdnc" key="esr-thirdparty-sdnc.thirdparty-sdnc-id = $prop.dci-connects.id AND         depth = '1'" pfx="tmp.aai.esr-thirdparty-sdnc" local-only="false">
+                            <outcome value="success">
+                                <set>
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.url" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].service-url`" />
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.user" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].user-name`" />
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.password" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].password`" />
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.vendor" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].vendor`" />
+                                </set>
+                            </outcome>
+                            <outcome value="not-found">
+                                <return status="failure">
+                                    <parameter name="error-code" value="" />
+                                    <parameter name="error-message" value="" />
+                                </return>
+                            </outcome>
+                            <outcome value="Other">
+                                <return status="failure">
+                                    <parameter name="error-code" value="" />
+                                    <parameter name="error-message" value="" />
+                                </return>
+                            </outcome>
+                        </get-resource>
+                        <execute plugin="org.onap.ccsdk.sli.plugins.prop.PropertiesNode" method="readProperties">
+                            <parameter name="fileName" value="%SDNC_CONFIG_DIR%/generic-resource-api-dg.properties" />
+                            <parameter name="contextPrefix" value="prop" />
+                        </execute>
+                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                            <parameter name="logger" value="message-log" />
+                            <parameter name="field1" value="__TIMESTAMP__" />
+                            <parameter name="field2" value="dci-network-topology-operation-activate" />
+                            <parameter name="field3" value="dci-connects.name" />
+                            <parameter name="field4" value="`$prop.dci-connects.name`" />
+                            <parameter name="field5" value="dci-connects.id" />
+                            <parameter name="field6" value="`$prop.dci-connects.id`" />
+                            <parameter name="field7" value="dci-connects.tunnelType" />
+                            <parameter name="field8" value="`$prop.dci-connects.tunnelType`" />
+                            <parameter name="field9" value="sdncRestApi.thirdpartySdnc.url" />
+                            <parameter name="field10" value="`$prop.sdncRestApi.thirdpartySdnc.url`" />
+                        </record>
+                        <switch test="`$prop.sdncRestApi.thirdpartySdnc.vendor`">
+                            <outcome value="SPTN">
+                                <switch test="`$prop.dci-connects.tunnelType`">
+                                    <outcome value="L3-DCI">
+                                        <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
+                                            <parameter name="templateFileName" value="`$prop.restapi.templateDir +'/l3-dci-connects-template.json'`" />
+                                            <parameter name="restapiUrl" value="`$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l3-dci-connects'`" />
+                                            <parameter name="restapiUser" value="`$prop.sdncRestApi.thirdpartySdnc.user`" />
+                                            <parameter name="restapiPassword" value="`$prop.sdncRestApi.thirdpartySdnc.password`" />
+                                            <parameter name="format" value="json" />
+                                            <parameter name="httpMethod" value="post" />
+                                            <parameter name="responsePrefix" value="restapi-result" />
+                                        </execute>
+                                    </outcome>
+                                    <outcome value="L2-DCI">
+                                        <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
+                                            <parameter name="templateFileName" value="`$prop.restapi.templateDir +'/l2-dci-connects-template.json'`" />
+                                            <parameter name="restapiUrl" value="`$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l2-dci-connects'`" />
+                                            <parameter name="restapiUser" value="`$prop.sdncRestApi.thirdpartySdnc.user`" />
+                                            <parameter name="restapiPassword" value="`$prop.sdncRestApi.thirdpartySdnc.password`" />
+                                            <parameter name="format" value="json" />
+                                            <parameter name="httpMethod" value="post" />
+                                            <parameter name="responsePrefix" value="restapi-result" />
+                                        </execute>
+                                    </outcome>
+                                </switch>
+                            </outcome>
+                        </switch>
+                    </block>
+                </block>
+                <block atomic="true">
+                    <for index="idx" start="0" end="`$network-topology-operation-input.network-request-input.network-input-parameters.param_length`">
+                        <block>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_id'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_description'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.description" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                                <outcome value="false">
+                                    <set>
+                                        <parameter name="prop.dci-connects.description" value="" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_networkName'`">
+                                <outcome value="true">
+                                    <block atomic="true">
+                                        <set>
+                                            <parameter name="tmp.dci-connects.local_networks.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                        </set>
+                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
+                                            <parameter name="original_string" value="`$tmp.dci-connects.local_networks.original`" />
+                                            <parameter name="regex" value="," />
+                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.local_networks" />
+                                            <outcome value="success">
+                                                <for index="idx" start="0" end="`$tmp.dci-connects.local_networks_length`">
+                                                    <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="l3-network" key="l3-network.network-name = $tmp.dci-connects.local_networks[$idx] AND         depth = '0'" pfx="tmp.aai.l3-network" local-only="false">
+                                                        <outcome value="success">
+                                                            <set>
+                                                                <parameter name="prop.dci-connects.local_networks[$idx]" value="`$tmp.aai.l3-network.network-id`" />
+                                                            </set>
+                                                        </outcome>
+                                                        <outcome value="not-found">
+                                                            <return status="failure">
+                                                                <parameter name="error-code" value="" />
+                                                                <parameter name="error-message" value="" />
+                                                            </return>
+                                                        </outcome>
+                                                        <outcome value="Other">
+                                                            <return status="failure">
+                                                                <parameter name="error-code" value="" />
+                                                                <parameter name="error-message" value="" />
+                                                            </return>
+                                                        </outcome>
+                                                    </get-resource>
+                                                </for>
+                                            </outcome>
+                                            <outcome value="failure">
+                                                <return status="failure">
+                                                    <parameter name="error-code" value="" />
+                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
+                                                </return>
+                                            </outcome>
+                                        </execute>
+                                    </block>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_routerId'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.router_id" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_importRT1'`">
+                                <outcome value="true">
+                                    <block atomic="true">
+                                        <set>
+                                            <parameter name="tmp.dci-connects.evpn_irts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                        </set>
+                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
+                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_irts.original`" />
+                                            <parameter name="regex" value="," />
+                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_irts" />
+                                            <outcome value="success">
+                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_irts_length`">
+                                                    <set>
+                                                        <parameter name="prop.dci-connects.evpn_irts[$idx]" value="`$tmp.dci-connects.evpn_irts[$idx]`" />
+                                                    </set>
+                                                </for>
+                                            </outcome>
+                                            <outcome value="failure">
+                                                <return status="failure">
+                                                    <parameter name="error-code" value="" />
+                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
+                                                </return>
+                                            </outcome>
+                                        </execute>
+                                    </block>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_exportRT1'`">
+                                <outcome value="true">
+                                    <block atomic="true">
+                                        <set>
+                                            <parameter name="tmp.dci-connects.evpn_erts.original" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                        </set>
+                                        <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils" method="split">
+                                            <parameter name="original_string" value="`$tmp.dci-connects.evpn_erts.original`" />
+                                            <parameter name="regex" value="," />
+                                            <parameter name="ctx_memory_result_key" value="tmp.dci-connects.evpn_erts" />
+                                            <outcome value="success">
+                                                <for index="idx" start="0" end="`$tmp.dci-connects.evpn_erts_length`">
+                                                    <set>
+                                                        <parameter name="prop.dci-connects.evpn_erts[$idx]" value="`$tmp.dci-connects.evpn_erts[$idx]`" />
+                                                    </set>
+                                                </for>
+                                            </outcome>
+                                            <outcome value="failure">
+                                                <return status="failure">
+                                                    <parameter name="error-code" value="" />
+                                                    <parameter name="error-message" value="An error occured while splitting sna1_route" />
+                                                </return>
+                                            </outcome>
+                                        </execute>
+                                    </block>
+                                </outcome>
+                            </switch>
+                            <switch test="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].name == 'site2_vni'`">
+                                <outcome value="true">
+                                    <set>
+                                        <parameter name="prop.dci-connects.vni" value="`$network-topology-operation-input.network-request-input.network-input-parameters.param[$idx].value`" />
+                                    </set>
+                                </outcome>
+                            </switch>
+                        </block>
+                    </for>
+                    <block atomic="true">
+                        <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="esr-thirdparty-sdnc" key="esr-thirdparty-sdnc.thirdparty-sdnc-id = $prop.dci-connects.id AND         depth = '1'" pfx="tmp.aai.esr-thirdparty-sdnc" local-only="false">
+                            <outcome value="success">
+                                <set>
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.url" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].service-url`" />
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.user" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].user-name`" />
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.password" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].password`" />
+                                    <parameter name="prop.sdncRestApi.thirdpartySdnc.vendor" value="`$tmp.aai.esr-thirdparty-sdnc.esr-system-info-list.esr-system-info[0].vendor`" />
+                                </set>
+                            </outcome>
+                            <outcome value="not-found">
+                                <return status="failure">
+                                    <parameter name="error-code" value="" />
+                                    <parameter name="error-message" value="" />
+                                </return>
+                            </outcome>
+                            <outcome value="Other">
+                                <return status="failure">
+                                    <parameter name="error-code" value="" />
+                                    <parameter name="error-message" value="" />
+                                </return>
+                            </outcome>
+                        </get-resource>
+                        <execute plugin="org.onap.ccsdk.sli.plugins.prop.PropertiesNode" method="readProperties">
+                            <parameter name="fileName" value="%SDNC_CONFIG_DIR%/generic-resource-api-dg.properties" />
+                            <parameter name="contextPrefix" value="prop" />
+                        </execute>
+                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                            <parameter name="logger" value="message-log" />
+                            <parameter name="field1" value="__TIMESTAMP__" />
+                            <parameter name="field2" value="dci-network-topology-operation-activate" />
+                            <parameter name="field3" value="dci-connects.name" />
+                            <parameter name="field4" value="`$prop.dci-connects.name`" />
+                            <parameter name="field5" value="dci-connects.id" />
+                            <parameter name="field6" value="`$prop.dci-connects.id`" />
+                            <parameter name="field7" value="dci-connects.tunnelType" />
+                            <parameter name="field8" value="`$prop.dci-connects.tunnelType`" />
+                            <parameter name="field9" value="sdncRestApi.thirdpartySdnc.url" />
+                            <parameter name="field10" value="`$prop.sdncRestApi.thirdpartySdnc.url`" />
+                        </record>
+                        <switch test="`$prop.sdncRestApi.thirdpartySdnc.vendor`">
+                            <outcome value="SPTN">
+                                <switch test="`$prop.dci-connects.tunnelType`">
+                                    <outcome value="L3-DCI">
+                                        <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
+                                            <parameter name="templateFileName" value="`$prop.restapi.templateDir +'/l3-dci-connects-template.json'`" />
+                                            <parameter name="restapiUrl" value="`$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l3-dci-connects'`" />
+                                            <parameter name="restapiUser" value="`$prop.sdncRestApi.thirdpartySdnc.user`" />
+                                            <parameter name="restapiPassword" value="`$prop.sdncRestApi.thirdpartySdnc.password`" />
+                                            <parameter name="format" value="json" />
+                                            <parameter name="httpMethod" value="post" />
+                                            <parameter name="responsePrefix" value="restapi-result" />
+                                        </execute>
+                                    </outcome>
+                                    <outcome value="L2-DCI">
+                                        <execute plugin="org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode" method="sendRequest">
+                                            <parameter name="templateFileName" value="`$prop.restapi.templateDir +'/l2-dci-connects-template.json'`" />
+                                            <parameter name="restapiUrl" value="`$prop.sdncRestApi.thirdpartySdnc.url +'/v2.0/l2-dci-connects'`" />
+                                            <parameter name="restapiUser" value="`$prop.sdncRestApi.thirdpartySdnc.user`" />
+                                            <parameter name="restapiPassword" value="`$prop.sdncRestApi.thirdpartySdnc.password`" />
+                                            <parameter name="format" value="json" />
+                                            <parameter name="httpMethod" value="post" />
+                                            <parameter name="responsePrefix" value="restapi-result" />
+                                        </execute>
+                                    </outcome>
+                                </switch>
+                            </outcome>
+                        </switch>
+                    </block>
+                </block>
+                <block atomic="true">
+                    <execute plugin="org.onap.ccsdk.sli.core.slipluginutils.SliPluginUtils" method="generateUUID">
+                        <parameter name="ctx-destination" value="prop.dci.network-id" />
+                    </execute>
+                    <switch test="`$service-data.networks.network_length`">
+                        <outcome value="">
+                            <set>
+                                <parameter name="nidx" value="0" />
+                            </set>
+                        </outcome>
+                        <outcome value="Other">
+                            <set>
+                                <parameter name="nidx" value="`$service-data.networks.network_length`" />
+                            </set>
+                        </outcome>
+                    </switch>
+                    <set>
+                        <parameter name="service-data.networks.network[$nidx].network-id" value="`$prop.dci.network-id`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.sdnc-request-header." value="`$network-topology-operation-input.sdnc-request-header.`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.request-information." value="`$network-topology-operation-input.request-information.`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.service-information." value="`$network-topology-operation-input.service-information.`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.network-information." value="`$network-topology-operation-input.network-information.`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.network-request-input." value="`$network-topology-operation-input.network-request-input.`" />
+                        <parameter name="service-data.networks.network_length" value="`$nidx+1`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.network-level-oper-status.order-status" value="Created" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.network-level-oper-status.last-rpc-action" value="`$network-topology-operation-input.sdnc-request-header.svc-action`" />
+                        <parameter name="service-data.networks.network[$nidx].network-data.network-level-oper-status.last-action" value="`$network-topology-operation-input.request-information.request-action`" />
+                    </set>
+                    <set>
+                        <parameter name="networkId" value="`$prop.dci.network-id`" />
+                        <parameter name="network-object-path" value="`'restconf/config/GENERIC-RESOURCE-API:services/service/'  + $network-topology-operation-input.service-information.service-instance-id  + '/service-data/networks/network/'  + $prop.dci.network-id  + '/network-data/'` " />
+                    </set>
+                </block>
+            </block>
+            <save plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="configuration" key="configuration.configuration-id = $prop.dci.network-id">
+                <parameter name="configuration-id" value="`$prop.dci.network-id`" />
+                <parameter name="configuration-type" value="overlay" />
+                <parameter name="configuration-sub-type" value="VPN-DCI" />
+                <parameter name="orchestration-status" value="Created" />
+                <parameter name="operational-status" value="Created" />
+                <parameter name="model-customization-id" value="`$prop.dci.network-id`" />
+                <parameter name="configuration-selflink" value="`'restconf/config/GENERIC-RESOURCE-API:services/service/'  + $network-topology-operation-input.service-information.service-instance-id  + '/service-data/networks/network/'  + $prop.dci.network-id  + '/network-data/'` " />
+            </save>
+            <save plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService" resource="service-instance:relationship-list" key="service-instance.service-instance-id = $service-data.service-information.service-instance-id           AND customer.global-customer-id = $service-data.networks.network[$nidx].network-data.service-information.global-customer-id           AND service-subscription.service-type = $service-data.networks.network[$nidx].network-data.service-information.subscription-service-type" force="true" pfx="tmp.AnAI-data">
+                <parameter name="relationship-list.relationship[0].related-to" value="configuration" />
+                <parameter name="relationship-list.relationship[0].related-link" value="`'/network/configurations/configuration/' + $prop.dci.network-id`" />
+                <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="configuration.configuration-id" />
+                <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$prop.dci.network-id`" />
+            </save>
+            <return status="success">
+                <parameter name="ack-final-indicator" value="Y" />
+                <parameter name="error-code" value="200" />
+                <parameter name="error-message" value="`$error-message`" />
+            </return>
+        </block>
+    </method>
+</service-logic>