X-Git-Url: https://gerrit.onap.org/r/gitweb?a=blobdiff_plain;f=boot%2Fdcae2_vm_init.sh;fp=boot%2Fdcae2_vm_init.sh;h=0000000000000000000000000000000000000000;hb=f4db92493f1bd94184d23e1771a8f600202391a6;hp=17ab00345fde16162b22e8581c183482ab5bd746;hpb=3e4c0d93034e07a93d881ef13db3e5f2e2f9f3ba;p=demo.git

diff --git a/boot/dcae2_vm_init.sh b/boot/dcae2_vm_init.sh
deleted file mode 100755
index 17ab0034..00000000
--- a/boot/dcae2_vm_init.sh
+++ /dev/null
@@ -1,242 +0,0 @@
-#!/bin/bash
-#############################################################################
-#
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#        http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#############################################################################
-
-
-
-
-################################## start of vm_init #####################################
-
-set -ex
-
-URL_ROOT='nexus.onap.org/service/local/repositories/raw/content'
-REPO_BLUEPRINTS='org.onap.dcaegen2.platform.blueprints'
-REPO_DEPLOYMENTS='org.onap.dcaegen2.deployments'
-if [ -e /opt/config/dcae_deployment_profile.txt ]; then
-  DEPLOYMENT_PROFILE=$(cat /opt/config/dcae_deployment_profile.txt)
-fi
-DEPLOYMENT_PROFILE=${DEPLOYMENT_PROFILE:-R3}
-
-NEXUS_USER=$(cat /opt/config/nexus_username.txt)
-NEXUS_PASSWORD=$(cat /opt/config/nexus_password.txt)
-NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt)
-DOCKER_VERSION=$(cat /opt/config/docker_version.txt)
-
-MYFLOATIP=$(cat /opt/config/dcae_float_ip.txt)
-MYLOCALIP=$(cat /opt/config/dcae_ip_addr.txt)
-HTTP_PROXY=$(cat /opt/config/http_proxy.txt)
-HTTPS_PROXY=$(cat /opt/config/https_proxy.txt)
-
-if [ $HTTP_PROXY != "no_proxy" ]
-then
-    export http_proxy=$HTTP_PROXY
-    export https_proxy=$HTTPS_PROXY
-fi
-
-# clean up old network configuration in docker engine
-set +e
-if [ -n "$(docker ps -q -a)" ]; then
-  docker stop $(docker ps -q -a)
-  docker update --restart=no $(docker ps -a -q)
-  systemctl restart docker
-  docker rm $(docker ps -q -a)
-  if [ -n "$(docker network ls | grep 'config_default')" ]; then
-    docker network rm config_default
-  fi
-fi
-set -e
-
-
-docker login -u "$NEXUS_USER" -p "$NEXUS_PASSWORD" "$NEXUS_DOCKER_REPO"
-
-if [[ $DEPLOYMENT_PROFILE == R1* || $DEPLOYMENT_PROFILE == R2* ]]; then
-  echo "R1 and R2 deployment profiles are not supported in Casablanca Heat deployment"
-elif [[ $DEPLOYMENT_PROFILE == R3* ]]; then
-  RELEASE_TAG='R3'
-
-  set +e
-  rm -rf /opt/app/inputs-templates
-  mkdir -p /opt/app/inputs-templates
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-1.yaml
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-2.yaml
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-3.yaml
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-4.yaml
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/register.sh
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/setup.sh
-  wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/teardown.sh
-
-  pip install --upgrade jinja2
-  wget https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/scripts/detemplate-bpinputs.py \
-    && \
-    (python detemplate-bpinputs.py /opt/config /opt/app/inputs-templates /opt/app/config; \
-     rm detemplate-bpinputs.py)
-
-  if [ -e /opt/app/config/register.sh ]; then
-    chmod +x /opt/app/config/register.sh
-  fi
-  if [ -e /opt/app/config/setup.sh ]; then
-    chmod +x /opt/app/config/setup.sh
-  fi
-  if [ -e /opt/app/config/build-plugins.sh ]; then
-    chmod +x /opt/app/config/build-plugins.sh
-  fi
-  set -e
-
-  cd /opt/app/config
-  # deploy essentials
-  /opt/docker/docker-compose -f docker-compose-1.yaml up -d
-
-  # wait for essentials to become ready
-  echo "Waiting for Consul to come up ready"
-  while ! nc -z localhost 8500; do sleep 1; done
-  echo "Waiting for Postgres DB to come up ready"
-  while ! nc -z localhost 5432; do sleep 1; done
-  echo "Waiting for CBS to come up ready"
-  while ! nc -z localhost 10000; do sleep 1; done
-  echo "All dependencies are up, proceed to the next phase"
-  sleep 30
-
-  echo "Setup CloudifyManager and Registrator"
-  ./setup.sh
-  sleep 10
-
-  export http_proxy=""
-  export https_proxy=""
-
-  ./register.sh
-
-  echo "Bring up DCAE MIN service components for R2 use cases"
-  /opt/docker/docker-compose -f docker-compose-2.yaml up -d
-
-  if [[ "$DEPLOYMENT_PROFILE" == "R3" || "$DEPLOYMENT_PROFILE" == "R3PLUS" ]]; then
-    echo "Bring up DCAE platform components"
-    /opt/docker/docker-compose -f docker-compose-3.yaml up -d
-
-    if [[ "$DEPLOYMENT_PROFILE" == "R3PLUS" ]]; then
-      echo "Bring up additional (plus) DCAE service components"
-      /opt/docker/docker-compose -f docker-compose-4.yaml up -d
-    fi
-  fi
-
-  # start proxy for consul's health check
-  CONSULIP=$(cat /opt/config/dcae_ip_addr.txt)
-  echo "Consul is available at $CONSULIP"
-fi
-
-cat >./nginx.conf <<EOL
-server {
-    listen 80;
-    server_name dcae.simpledemo.onap.org;
-    root /www/healthcheck;
-
-    location /healthcheck {
-        try_files /services.yaml =404;
-    }
-    location /R3MIN{
-        try_files /r3mvp_healthy.yaml =404;
-    }
-    location /R3 {
-        try_files /r3_healthy.yaml =404;
-    }
-    location /R3PLUS {
-        try_files /r3plus_healthy.yaml =404;
-    }
-}
-EOL
-
-HEALTHPORT=8000
-docker run -d \
---name dcae-health \
--p ${HEALTHPORT}:80 \
--v "$(pwd)/nginx.conf:/etc/nginx/conf.d/default.conf" \
--v "/tmp/healthcheck:/www/healthcheck" \
---label "SERVICE_80_NAME=dcae-health" \
---label "SERVICE_80_CHECK_HTTP=/healthcheck" \
---label "SERVICE_80_CHECK_INTERVAL=15s" \
---label "SERVICE_80_CHECK_INITIAL_STATUS=passing" \
- nginx
-
-echo "Healthcheck API available at http://${MYFLOATIP}:${HEALTHPORT}/healthcheck"
-echo "                             http://${MYFLOATIP}:${HEALTHPORT}/R3"
-echo "                             http://${MYFLOATIP}:${HEALTHPORT}/R3MIN"
-echo "                             http://${MYFLOATIP}:${HEALTHPORT}/R3PLUS"
-
-# run forever for updating health status based on consul
-set +e
-while :
-do
-  rm -rf /tmp/healthcheck/*
-  # all registered services
-  SERVICES=$(curl -s http://consul:8500/v1/agent/services |jq '. | to_entries[] | .value.Service')
-  # passing services
-  SERVICES=$(curl -s http://consul:8500/v1/health/state/passing | jq '.[] | .ServiceName')
-
-  # remove empty lines/entries
-  SERVICES=$(echo "$SERVICES" | sed '/^\s*\"\"\s*$/d' |sed '/^\s*$/d')
-
-  SERVICES_JSON=$(echo "$SERVICES" | sed 's/\"$/\",/g' | sed '$ s/.$//')
-
-  echo "$(date): running healthy services:"
-  echo ">>>  $SERVICES"
-  PLT_CONSUL=$(echo "$SERVICES" |grep "consul")
-  PLT_CBS=$(echo "$SERVICES" |grep "config_binding_service")
-  MVP_PG_HOLMES=$(echo "$SERVICES" |grep "pgHolmes")
-  MVP_VES=$(echo "$SERVICES" |grep "mvp.*ves")
-  MVP_TCA=$(echo "$SERVICES" |grep "mvp.*tca")
-  MVP_HR=$(echo "$SERVICES" |grep "mvp.*holmes-rule")
-  MVP_HE=$(echo "$SERVICES" |grep "mvp.*holmes-engine")
-
-  PLT_CM=$(echo "$SERVICES" |grep "cloudify.*manager")
-  PLT_DH=$(echo "$SERVICES" |grep "deployment.*handler")
-  PLT_PH=$(echo "$SERVICES" |grep "policy.*handler")
-  PLT_SCH=$(echo "$SERVICES" |grep "service.*change.*handler")
-  PLT_INV=$(echo "$SERVICES" |grep "inventory")
-  PLT_PG_INVENTORY=$(echo "$SERVICES" |grep "pgInventory")
-
-  PLUS_MHB=$(echo "$SERVICES" |grep "heartbeat")
-  PLUS_PRH=$(echo "$SERVICES" |grep "prh")
-  PLUS_MPR=$(echo "$SERVICES" |grep "mapper")
-  PLUS_TRAP=$(echo "$SERVICES" |grep "snmptrap")
-
-  DATA="{\"healthy\" : \"$(date)\", \"healthy_services\": [${SERVICES_JSON}]}"
-  if [[ -n "$PLT_CONSUL" && -n "$PLT_CBS" && -n "$MVP_PG_HOLMES" && -n "$MVP_VES" && \
-        -n "$MVP_TCA" ]]; then
-    echo "${DATA}" > /tmp/healthcheck/r3mvp_healthy.yaml
-    echo "${DATA}" > /tmp/healthcheck/services.yaml
-    echo ">>>>>> enough services satisfying R3MIN service deployment"
-  else
-    echo ">>>>>> not enough services satisfying R3MIN service deployment"
-  fi
-
-  if [[ -n "$PLT_CONSUL" && -n "$PLT_CBS" && -n "$PLT_CM" && -n "$PLT_DH" && \
-        -n "$PLT_PH" && -n "$PLT_SCH" && -n "$PLT_INV" && -n "$PLT_PG_INVENTORY" ]]; then
-    echo ">>>>>> enough services satisfying R3 platform deployment"
-    echo "${DATA}" > /tmp/healthcheck/r3_healthy.yaml
-
-    if [[ -n "$PLUS_MHB" && -n "$PLUS_PRH" && -n "$PLUS_MPR" && -n "$PLUS_TRAP"  && -n "$MVP_HR" && -n "$MVP_HE" ]]; then
-      echo ">>>>>> enough services satisfying R3PLUS deployment"
-      echo "${DATA}" > /tmp/healthcheck/r3plus_healthy.yaml
-    else
-      echo ">>>>>> not enough services satisfying R3PLUS service deployment"
-    fi
-  else
-    echo ">>>>>> not enough services satisfying R3 platform or R3PLUS service deployment"
-  fi
-  
-  sleep 60
-done
-