X-Git-Url: https://gerrit.onap.org/r/gitweb?a=blobdiff_plain;f=auth%2Fsample%2Fbin%2Fservice.sh;h=78f6693b0798817b3cb2b80dc3e0ca5fee225737;hb=7a1817bf3cf3c40c6c33f673ddc46c3f115cc3bc;hp=15c3714d1db725a364c01fbe97a0f26cba94ac9c;hpb=047edb5a4312cc7dfb3172b7e11ab1a9e2315ba2;p=aaf%2Fauthz.git

diff --git a/auth/sample/bin/service.sh b/auth/sample/bin/service.sh
index 15c3714d..78f6693b 100644
--- a/auth/sample/bin/service.sh
+++ b/auth/sample/bin/service.sh
@@ -1,41 +1,178 @@
 #!/bin/bash
+#########
+#  ============LICENSE_START====================================================
+#  org.onap.aaf
+#  ===========================================================================
+#  Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+#  ===========================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END====================================================
+#
 # This script is run when starting aaf_config Container.
 #  It needs to cover the cases where the initial data doesn't exist, and when it has already been configured (don't overwrite)
 #
 JAVA=/usr/bin/java
 
+OSAAF=/opt/app/osaaf
+LOCAL=$OSAAF/local
+DATA=$OSAAF/data
+PUBLIC=$OSAAF/public
+CONFIG=/opt/app/aaf_config
+
+JAVA_CADI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar org.onap.aaf.cadi.CmdLine" 
+JAVA_AGENT="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.cadi.configure.Agent" 
+JAVA_AAFCLI="$JAVA -cp $CONFIG/bin/aaf-auth-cmd-*-full.jar -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.auth.cmd.AAFcli" 
+
+# If doesn't exist... still create
+mkdir -p /opt/app/osaaf
+
+# Temp use for clarity of code
+FILE=
+
+# Setup Bash, first time only
+if [ ! -e "$HOME/.bash_aliases" ] || [ -z "$(grep cadi $HOME/.bash_aliases)" ]; then
+  echo "alias cadi='$JAVA_CADI \$*'" >>$HOME/.bash_aliases
+  echo "alias agent='$CONFIG/bin/agent.sh EMPTY \$*'" >>$HOME/.bash_aliases
+  echo "alias aafcli='$JAVA_AAFCLI \$*'" >>$HOME/.bash_aliases
+  chmod a+x $CONFIG/bin/agent.sh
+  . $HOME/.bash_aliases
+fi
+
 # Only load Identities once
-if [ ! -e /opt/app/osaaf/data/identities.dat ]; then
-    mkdir -p /opt/app/osaaf/data
-    cp /opt/app/aaf_config/data/sample.identities.dat /opt/app/osaaf/data/identities.dat
+# echo "Check Identities"
+FILE="$DATA/identities.dat"
+if [ ! -e $FILE ]; then
+    mkdir -p $DATA
+    cp $CONFIG/data/sample.identities.dat $FILE
+    echo "Set Identities"
+    INITIALIZED="true"
+fi
+
+# Load up Cert/X509 Artifacts
+# echo "Check Signer Keyfile"
+FILE="$LOCAL/org.osaaf.aaf.signer.p12"
+if [ ! -e $FILE ]; then
+    mkdir -p $LOCAL
+    mkdir -p $PUBLIC
+    if [ -e $CONFIG/cert/org.osaaf.aaf.signer.p12 ]; then
+        cp $CONFIG/cert/org.osaaf.aaf.signer.p12 $FILE
+        echo "Installed Signer P12"
+        INITIALIZED="true"
+    else
+        echo "Decode"
+        base64 -d $CONFIG/cert/demoONAPsigner.p12.b64 > $FILE
+	base64 -d $CONFIG/cert/truststoreONAP.p12.b64 > $PUBLIC/truststoreONAP.p12 
+	base64 -d $CONFIG/cert/truststoreONAPall.jks.b64 > $PUBLIC/truststoreONAPall.jks
+	ln -s $PUBLIC/truststoreONAPall.jks $LOCAL
+	cp $CONFIG/cert/AAF_RootCA.cer $PUBLIC
+	CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
+	echo "cadi_keystore_password=something easy" >> $CONFIG/local/aaf.props        
+        echo "Setup ONAP Test CAs and Signers"
+        INITIALIZED="true"
+    fi
+fi
+
+# echo "Check keyfile"
+FILE="$LOCAL/org.osaaf.aaf.p12"
+if [ ! -e $FILE ]; then
+    if [ -e $CONFIG/cert/org.osaaf.aaf.p12 ]; then
+        cp $CONFIG/cert/org.osaaf.aaf.p12 $FILE
+        echo "Installed AAF P12"
+        INITIALIZED="true"
+    else
+        echo "Bootstrap Creation of Keystore from Signer"
+        cd $CONFIG/CA
+	
+        # Remove this after Casablanca
+	CADI_X509_ISSUERS="CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US"
+	bash bootstrap.sh $LOCAL/org.osaaf.aaf.signer.p12 'something easy'
+	cp aaf.bootstrap.p12 $FILE
+	if [ -n "$CADI_X509_ISSUERS" ]; then
+            CADI_X509_ISSUERS="$CADI_X509_ISSUERS:"
+        fi
+	BOOT_ISSUER="$(cat aaf.bootstrap.issuer)"
+	CADI_X509_ISSUERS="$CADI_X509_ISSUERS$BOOT_ISSUER"
+
+	I=${BOOT_ISSUER##CN=};I=${I%%,*}
+        CM_CA_PASS="something easy"
+        CM_CA_LOCAL="org.onap.aaf.auth.cm.ca.LocalCA,$LOCAL/org.osaaf.aaf.signer.p12;aaf_intermediate_9;enc:"
+	CM_TRUST_CAS="$PUBLIC/AAF_RootCA.cer"
+        echo "Generated ONAP Test AAF certs"
+        INITIALIZED="true"
+    fi
 fi
 
 # Only initialize once, automatically...
-if [ ! -e /opt/app/osaaf/local/org.osaaf.aaf.props ]; then
-    rsync -avzh --exclude=.gitignore /opt/app/aaf_config/local/org.osaaf.aaf* /opt/app/osaaf/local
+if [ ! -e $LOCAL/org.osaaf.aaf.props ]; then
+    rsync -avzh --exclude=.gitignore $CONFIG/local/org.osaaf.aaf* $LOCAL
     for D in public etc logs; do
-        rsync -avzh --exclude=.gitignore /opt/app/aaf_config/$D/* /opt/app/osaaf/$D
+        rsync -avzh --exclude=.gitignore $CONFIG/$D/* /opt/app/osaaf/$D
     done
 
     TMP=$(mktemp)
     echo aaf_env=${AAF_ENV} >> ${TMP}
+    echo aaf_release=${VERSION} >> ${TMP}
     echo cadi_latitude=${LATITUDE} >> ${TMP}
     echo cadi_longitude=${LONGITUDE} >> ${TMP}
+    echo cadi_x509_issuers=${CADI_X509_ISSUERS} >> ${TMP}
     echo aaf_register_as=${AAF_REGISTER_AS} >> ${TMP}
-    echo aaf_locate_url=https://${AAF_REGISTER_AS}:8095 >> ${TMP}
+    AAF_LOCATOR_AS=${AAF_LOCATOR_AS:=$AAF_REGISTER_AS}
+    echo aaf_locate_url=https://${AAF_LOCATOR_AS}:8095 >> ${TMP}
 
-    $JAVA -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar config aaf@aaf.osaaf.org \
-        cadi_etc_dir=/opt/app/osaaf/local \
-        cadi_prop_files=/opt/app/aaf_config/local/initialConfig.props:/opt/app/aaf_config/local/aaf.props:${TMP}
+    cat $TMP
+
+    $JAVA_AGENT config \
+	aaf@aaf.osaaf.org \
+        cadi_etc_dir=$LOCAL \
+        cadi_prop_files=$CONFIG/local/initialConfig.props:$CONFIG/local/aaf.props:${TMP}
     rm ${TMP}
-    # Default Password for Default Cass
-    CASS_PASS=$("$JAVA" -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar cadi digest "cassandra" /opt/app/osaaf/local/org.osaaf.aaf.keyfile)
-    sed -i.backup -e "s/\\(cassandra.clusters.password=enc:\\)/\\1$CASS_PASS/" /opt/app/osaaf/local/org.osaaf.aaf.cassandra.props
+
+    # Cassandra Config stuff
+    # Default is expect a Cassandra on same Node
+    CASS_HOST=${CASS_HOST:="aaf_cass"}
+    CASS_PASS=$($JAVA_CADI digest "${CASSANDRA_PASSWORD:-cassandra}" $LOCAL/org.osaaf.aaf.keyfile)
+    CASS_NAME=${CASS_HOST/:*/}
+    sed -i.backup -e "s/\\(cassandra.clusters=\\).*/\\1${CASSANDRA_CLUSTERS:=$CASS_HOST}/" \
+                  -e "s/\\(cassandra.clusters.user=\\).*/\\1${CASSANDRA_USER:=cassandra}/" \
+                  -e "s/\\(cassandra.clusters.password=enc:\\).*/\\1$CASS_PASS/" \
+                  -e "s/\\(cassandra.clusters.port=\\).*/\\1${CASSANDRA_PORT:=9042}/" \
+                  $LOCAL/org.osaaf.aaf.cassandra.props
+
+    if [ -n "$CM_CA_LOCAL" ]; then
+      if [ -n "$CM_CA_PASS" ]; then
+          CM_CA_LOCAL=$CM_CA_LOCAL$($JAVA_CADI digest "$CM_CA_PASS" $LOCAL/org.osaaf.aaf.keyfile)	
+      fi
+      # Move and copy method, rather than sed, because of slashes in CM_CA_LOCAL makes too complex
+      FILE=$LOCAL/org.osaaf.aaf.cm.ca.props
+      mv $FILE $FILE.backup
+      grep -v "cm_ca.local=" $FILE.backup > $FILE
+      echo "cm_ca.local=$CM_CA_LOCAL" >> $FILE
+      echo "cm_trust_cas=$CM_TRUST_CAS" >> $FILE
+    fi
+    echo "Created AAF Initial Configurations"
+    INITIALIZED="true"
 fi
 
+
 # Now run a command
 CMD=$2
-if [ ! "$CMD" = "" ]; then
+if [ -z "$CMD"  ]; then
+    if [ -n "$INITIALIZED" ]; then
+        echo "Initialization Complete"
+    else
+        echo "No Additional Initialization required"
+    fi
+else
     shift
     shift
     case "$CMD" in
@@ -59,49 +196,51 @@ if [ ! "$CMD" = "" ]; then
         fi
         ;;
     update)
-        rsync -uh --exclude=.gitignore /opt/app/aaf_config/local/org.osaaf.aaf* /opt/app/osaaf/local
+        rsync -uh --exclude=.gitignore $CONFIG/local/org.osaaf.aaf* $LOCAL
         for D in public data etc logs; do
-            rsync -uh --exclude=.gitignore /opt/app/aaf_config/$D/* /opt/app/osaaf/$D
+            rsync -uh --exclude=.gitignore $CONFIG/$D/* /opt/app/osaaf/$D
         done
         ;;
     validate)
         echo "## validate requested"
-        $JAVA -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar validate cadi_prop_files=/opt/app/osaaf/local/org.osaaf.aaf.props
+        $JAVA_AAFCLI perm list user aaf@aaf.osaaf.org
         ;;
+    onap)
+        #echo Initializing ONAP configurations.
+	;;
     bash)
-        echo "alias agent='/bin/bash /opt/app/aaf_config/bin/agent.sh EMPTY \$*'" >>~/.bashrc
-        if [ ! "$(grep aaf_config ~/.bashrc)" = "" ]; then
-            echo "alias cadi='/bin/bash /opt/app/aaf_config/bin/agent.sh EMPTY cadi \$*'" >>~/.bashrc
-            echo "alias agent='/bin/bash /opt/app/aaf_config/bin/agent.sh EMPTY \$*'" >>~/.bashrc
-            #. ~/.bashrc
-        fi
         shift
-        cd /opt/app/osaaf/local || exit
+        cd $LOCAL || exit
         /bin/bash "$@"
         ;;
     setProp)
-        cd /opt/app/osaaf/local || exit
+        cd $LOCAL || exit
         FILES=$(grep -l "$1" ./*.props)
-	if [ "$FILES" = "" ]; then 
-  	    FILES="$3"
+	if [ -z "$FILES" ]; then 
+  	    if [ -z "$3" ]; then
+               FILES=org.osaaf.aaf.props
+            else 
+               FILES="$3"
+            fi
 	    ADD=Y
 	fi
         for F in $FILES; do
-            echo "Changing $1 in $F"
 	    if [ "$ADD" = "Y" ]; then
-		echo $2 >> $F
+                echo "Changing $1 to $F"
+		echo "$1=$2" >> $F
 	    else 
-                sed -i.backup -e "s/\\(${1}.*=\\).*/\\1${2}/" $F
+               echo "Changing $1 in $F"
+               sed -i.backup -e "s/\\(${1}.*=\\).*/\\1${2}/" $F
 	    fi
             cat $F
         done
         ;;
     encrypt)
-        cd /opt/app/osaaf/local || exit
+        cd $LOCAL || exit
 	echo $1
         FILES=$(grep -l "$1" ./*.props)
 	if [ "$FILES" = "" ]; then
-             FILES=/opt/app/osaaf/local/org.osaaf.aaf.cred.props
+             FILES=$LOCAL/org.osaaf.aaf.cred.props
 	     ADD=Y
         fi
         for F in $FILES; do
@@ -116,7 +255,7 @@ if [ ! "$CMD" = "" ]; then
             else
                 ORIG_PW="$2"
             fi
-            PWD=$("$JAVA" -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar cadi digest "$ORIG_PW" /opt/app/osaaf/local/org.osaaf.aaf.keyfile)
+            PWD=$($JAVA_CADI digest "$ORIG_PW" $LOCAL/org.osaaf.aaf.keyfile)
             if [ "$ADD" = "Y" ]; then
                   echo "$1=enc:$PWD" >> $F
             else 
@@ -128,6 +267,9 @@ if [ ! "$CMD" = "" ]; then
     taillog) 
 	sh /opt/app/osaaf/logs/taillog
 	;;
+    wait)
+	bash $CONFIG/bin/pod_wait.sh wait $1
+        ;;
     --help | -?)
         case "$1" in
         "")
@@ -146,17 +288,21 @@ if [ ! "$CMD" = "" ]; then
             ;;
         cadi)
             echo "--- cadi Tool Comands ---"
-            $JAVA -Dcadi_prop_files=/opt/app/osaaf/local/org.osaaf.aaf.props -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar cadi | tail -n +6
+            $JAVA_CADI 
             ;;
         agent)
             echo "--- agent Tool Comands ---"
-            $JAVA -Dcadi_prop_files=/opt/app/osaaf/local/org.osaaf.aaf.props -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar
+            $JAVA_AGENT 
+            ;;
+        aafcli)
+            echo "--- aafcli Tool Comands ---"
+            $JAVA_AAFCLI 
             ;;
         esac
         echo ""
         ;;
     *)
-        $JAVA -Dcadi_prop_files=/opt/app/osaaf/local/org.osaaf.aaf.props -jar /opt/app/aaf_config/bin/aaf-cadi-aaf-*-full.jar "$CMD" "$@"
+        $JAVA_AGENT "$CMD" "$@" cadi_prop_files=$LOCAL/org.osaaf.aaf.props 
         ;;
     esac
 fi