X-Git-Url: https://gerrit.onap.org/r/gitweb?a=blobdiff_plain;f=auth%2Fdocker%2Fdrun.sh;h=57a61676403104175362352e5ea6fbadc509991d;hb=HEAD;hp=2eb025eab0b35fe41965c96a5df61e948c4f6943;hpb=362f628e6c4029a39bf9cc179443099cd1e7f0fe;p=aaf%2Fauthz.git

diff --git a/auth/docker/drun.sh b/auth/docker/drun.sh
index 2eb025ea..86fe5984 100644
--- a/auth/docker/drun.sh
+++ b/auth/docker/drun.sh
@@ -1,24 +1,32 @@
 #!/bin/bash
+#########
+#  ============LICENSE_START====================================================
+#  org.onap.aaf
+#  ===========================================================================
+#  Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+#  ===========================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END====================================================
+#
 # Pull in Variables from d.props
 . ./d.props
 
-# Only need Cassandra Link Info when initializing the container.
-if [ ! -e ./cass.props ]; then
-    cp cass.props.init cass.props
-fi
+CASSANDRA_CLUSTER=${CASSANDRA_CLUSTER:=$CASSANDRA_DOCKER}
 
-CASS_IS_SET="$(grep '<Cass IP>' cass.props)"
-if [ -n "$CASS_IS_SET" ]; then
-    CASS_IP="$(docker container inspect aaf_cass | grep \"IPAddress\": -m 1 | cut -d '"' -f 4)"
-    if [ -n "$CASS_IP" ]; then
-      sed -i -e "s/\(^.*:\).*/\1$CASS_IP/" cass.props
-    else
-      echo "Set CASSASNDRA IP in cass.props"
-      exit
-    fi
-fi
+DOCKER=${DOCKER:=docker}
 
-. ./cass.props
+# Running without params keeps from being TTY
+bash ./aaf.sh 
 
 if [ "$1" == "" ]; then
     AAF_COMPONENTS=$(cat components)
@@ -26,45 +34,111 @@ else
     AAF_COMPONENTS="$@"
 fi
 
+# All the NORMAL services use common directory
+#  remove this for Hello, which we want non shared
+CONFIG="-v aaf_config:$CONF_ROOT_DIR"
+if [ -n "${DUSER}" ]; then
+  THE_USER="--user $DUSER"
+fi
+IMAGE="${PREFIX}${ORG}/${PROJECT}/aaf_core:${VERSION}"
+
 for AAF_COMPONENT in ${AAF_COMPONENTS}; do
+    LINKS=""
+    CMD_LINE=""
+    PUBLISH=""
     case "$AAF_COMPONENT" in
     "service")
-        PORTMAP="8100:8100"
-        LINKS="--link aaf_cass:cassandra --add-host=$CASS_HOST"
+        PUBLISH="--publish 8100:8100"
+        if [ -z "$CASSANDRA_DOCKER" ]; then
+	  CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-service && exec bin/service"
+        else
+	  CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-service aaf-cass && exec bin/service"
+          LINKS="--link $CASSANDRA_DOCKER"
+	  echo $CASSANDRA_CLUSTER
+        fi
         ;;
     "locate")
-        PORTMAP="8095:8095"
-        LINKS="--link aaf_cass:cassandra --add-host=$CASS_HOST"
+        PUBLISH="--publish 8095:8095"
+        LINKS="--link aaf-cass --link aaf-service"
+	CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-locate aaf-service && exec bin/locate"
         ;;
     "oauth")
-        PORTMAP="8140:8140"
-        LINKS="--link aaf_cass:cassandra --add-host=$CASS_HOST"
-        ;;
-    "gui")
-        PORTMAP="8200:8200"
+        PUBLISH="--publish 8140:8140"
+        LINKS="--link aaf-cass --link aaf-service --link aaf-locate"
+	CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-oauth aaf-service && exec bin/oauth"
         ;;
     "cm")
-        PORTMAP="8150:8150"
-        LINKS="--link aaf_cass:cassandra --add-host=$CASS_HOST"
+        PUBLISH="--publish 8150:8150"
+        LINKS="--link aaf-cass --link aaf-service --link aaf-locate --link aaf-oauth"
+	CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-cm aaf-locate && exec bin/cm"
         ;;
-    "hello")
-        PORTMAP="8130:8130"
+    "gui")
+        PUBLISH="--publish 8200:8200"
+        LINKS="--link aaf-service --link aaf-locate --link aaf-oauth --link aaf-cm"
+	CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-gui aaf-locate && exec bin/gui"
         ;;
     "fs")
-        PORTMAP="80:8096"
+        PUBLISH="--publish 80:8096"
+        LINKS="--link aaf-locate"
+	CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-fs aaf-locate && exec bin/fs"
+        ;;
+    "hello")
+        LINKS="--link aaf-service --link aaf-locate --link aaf-oauth --link aaf-cm"
+	CONFIG="-v aaf_hello_config:/opt/app/osaaf/local"
+
+	# Since Helm based element have init-containers, take the same approach here.
+        if [ -z "$(docker volume ls | grep aaf_hello_config)" ]; then
+            echo Init Hello Config Container
+
+  	    echo -n "Creating Volume: "
+            $DOCKER volume create -d local aaf_hello_config
+
+	    $DOCKER run --rm --name aaf_hello_config ${LINKS} \
+		$CONFIG \
+		--env AAF_FQDN=$HOSTNAME \
+		--env DEPLOY_FQI=deployer@people.osaaf.org \
+		--env DEPLOY_PASSWORD=demo123456! \
+		--env APP_FQI=aaf@aaf.osaaf.org \
+		--env APP_FQDN=aaf-hello \
+		--env LATITUDE=$LATITUDE \
+		--env LONGITUDE=$LONGITUDE \
+    		--env aaf_locator_container_ns=onap \
+    		--env aaf_locator_container=docker \
+		$LINKS \
+	        "${PREFIX}${ORG}/${PROJECT}/aaf_agent:${VERSION}" \
+ 		bash -c "bash /opt/app/aaf_config/bin/agent.sh && chown -R ${DUSER}:${DUSER} /opt/app/osaaf/local"
+	fi
+
+        PUBLISH="--publish 8130:8130"
+	#CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-hello aaf-locate aaf-cm && sleep 240"
+	CMD_LINE="cd /opt/app/aaf && /bin/bash bin/pod_wait.sh aaf-hello aaf-locate aaf-cm && exec bin/hello"
+	IMAGE="${PREFIX}${ORG}/${PROJECT}/aaf_hello:${VERSION}"
         ;;
     esac
 
-    echo Starting aaf_$AAF_COMPONENT...
+    echo Starting aaf-$AAF_COMPONENT...
 
-    docker run \
+    $DOCKER run  \
         -d \
-        --name aaf_$AAF_COMPONENT \
-        --hostname="${AAF_COMPONENT}.aaf.osaaf.org" \
-        --add-host="$HOSTNAME:$HOST_IP" \
-        --add-host="aaf.osaaf.org:$HOST_IP" \
+        ${THE_USER} \
+        --name aaf-$AAF_COMPONENT \
         ${LINKS} \
-        --publish $PORTMAP \
-        --mount 'type=volume,src=aaf_config,dst='$CONF_ROOT_DIR',volume-driver=local' \
-        ${PREFIX}${ORG}/${PROJECT}/aaf_${AAF_COMPONENT}:${VERSION}
+        --env AAF_ENV=${AAF_ENV} \
+        --env aaf_locator_container=docker \
+        --env aaf_locator_container_ns=${NAMESPACE} \
+        --env aaf_locator_fqdn=${HOSTNAME} \
+        --env aaf_locator_public_fqdn=${HOSTNAME} \
+        --env aaf_deployed_version=${VERSION} \
+        --env LATITUDE=${LATITUDE} \
+        --env LONGITUDE=${LONGITUDE} \
+        --env CASSANDRA_CLUSTER=${CASSANDRA_CLUSTER} \
+        --env CASSANDRA_USER=${CASSANDRA_USER} \
+        --env CASSANDRA_PASSWORD=${CASSANDRA_PASSWORD} \
+        --env CASSANDRA_PORT=${CASSANDRA_PORT} \
+        -v "aaf_status:/opt/app/aaf/status" \
+        $PUBLISH \
+	$CONFIG \
+	$IMAGE \
+	/bin/bash -c "$CMD_LINE"
+
 done