#!/bin/bash
-REPO_URL_BLOB=$(cat /opt/config/repo_url_blob.txt)
-REPO_URL_ARTIFACTS=$(cat /opt/config/repo_url_artifacts.txt)
-DEMO_ARTIFACTS_VERSION=$(cat /opt/config/demo_artifacts_version.txt)
-INSTALL_SCRIPT_VERSION=$(cat /opt/config/install_script_version.txt)
-VPP_SOURCE_REPO_URL=$(cat /opt/config/vpp_source_repo_url.txt)
-VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/vpp_source_repo_branch.txt)
-VPP_PATCH_URL=$(cat /opt/config/vpp_patch_url.txt)
-HC2VPP_SOURCE_REPO_URL=$(cat /opt/config/hc2vpp_source_repo_url.txt)
-HC2VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/hc2vpp_source_repo_branch.txt)
-HC2VPP_PATCH_URL=$(cat /opt/config/hc2vpp_patch_url.txt)
+SCRIPT_VERSION=$(cat /opt/config/script_version.txt)
CLOUD_ENV=$(cat /opt/config/cloud_env.txt)
+MUX_GW_IP=$(cat /opt/config/mux_gw_net_ipaddr.txt)
+MUX_GW_CIDR=$(cat /opt/config/mux_gw_net_cidr.txt)
+MUX_TO_BNG_IP=$(cat /opt/config/mux_to_bng_net_ipaddr.txt)
+BNG_MUX_CIDR=$(cat /opt/config/bng_mux_net_cidr.txt)
+BRG_BNG_CIDR=$(cat /opt/config/brg_bng_net_cidr.txt)
+BNG_TO_MUX_IP=$(cat /opt/config/bng_to_mux_net_ipaddr.txt)
# Convert Network CIDR to Netmask
cdr2mask () {
# OpenStack network configuration
if [[ $CLOUD_ENV == "openstack" ]]
then
- echo 127.0.0.1 $(hostname) >> /etc/hosts
-
- # Allow remote login as root
- mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
- cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
-
- MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
-
- IP=$(cat /opt/config/bng_mux_net_ipaddr.txt)
- BITS=$(cat /opt/config/bng_mux_net_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth1" >> /etc/network/interfaces
- echo "iface eth1 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- IP=$(cat /opt/config/oam_ipaddr.txt)
- BITS=$(cat /opt/config/oam_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth2" >> /etc/network/interfaces
- echo "iface eth2 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- IP=$(cat /opt/config/mux_gw_net_ipaddr.txt)
- BITS=$(cat /opt/config/mux_gw_net_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth3" >> /etc/network/interfaces
- echo "iface eth3 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- ifup eth1
- ifup eth2
- ifup eth3
-fi
+ echo 127.0.0.1 $(hostname) >> /etc/hosts
-# Download required dependencies
-echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
-echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
-apt-get update
-apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev
-sleep 1
+ # Allow remote login as root
+ mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
+ cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
-# Install the tools required for download codes
-apt-get install -y expect git patch make
+ MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
-#Download and build the VPP codes
-cd /opt
-git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp
-wget -O Vpp-Add-VES-agent-for-vG-MUX.patch ${VPP_PATCH_URL}
-
-cd vpp
-patch -p1 < ../Vpp-Add-VES-agent-for-vG-MUX.patch
-expect -c "
- spawn make install-dep;
- expect {
- \"Do you want to continue?*\" {send \"Y\r\"; interact}
- }
-"
-
-# Install the evel-library first since we need the lib
-cd /opt
-apt-get install -y libcurl4-openssl-dev
-git clone http://gerrit.onap.org/r/demo
-cd demo/vnfs/VES5.0/evel/evel-library/bldjobs
-make
-cp ../libs/x86_64/libevel.so /usr/lib
-ldconfig
-
-cd /opt/vpp/build-root
-./bootstrap.sh
-make V=0 PLATFORM=vpp TAG=vpp install-deb
-
-# Install the VPP package
-apt install -y python-ply-lex-3.5 python-ply-yacc-3.5 python-pycparser python-cffi
-dpkg -i *.deb
-systemctl stop vpp
+ IP=$(cat /opt/config/oam_ipaddr.txt)
+ BITS=$(cat /opt/config/oam_cidr.txt | cut -d"/" -f2)
+ NETMASK=$(cdr2mask $BITS)
+ echo "auto eth2" >> /etc/network/interfaces
+ echo "iface eth2 inet static" >> /etc/network/interfaces
+ echo " address $IP" >> /etc/network/interfaces
+ echo " netmask $NETMASK" >> /etc/network/interfaces
+ echo " mtu $MTU" >> /etc/network/interfaces
+
+ ifup eth2
+fi
# Auto-start configuration for the VPP
cat > /etc/vpp/startup.conf << EOF
EOF
-cat > /etc/vpp/setup.gate << EOF
-set int state GigabitEthernet0/8/0 up
-set int ip address GigabitEthernet0/8/0 10.1.0.20/24
+# Get list of network device PCI bus addresses
+get_nic_pci_list() {
+ while read -r line ; do
+ if [ "$line" != "${line#*network device}" ]; then
+ echo -n "${line%% *} "
+ fi
+ done < <(lspci)
+}
-set int state GigabitEthernet0/9/0 up
-set int ip address GigabitEthernet0/9/0 10.5.0.20/24
+NICS=$(get_nic_pci_list)
+NICS=`echo ${NICS} | sed 's/[0]\+\([0-9]\)/\1/g' | sed 's/[.:]/\//g'`
-create vxlan tunnel src 10.5.0.20 dst 10.5.0.21 vni 100
-EOF
+BNG_MUX_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 2` # second interface in list
+MUX_GW_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 4` # fourth interface in list
-# Download and install HC2VPP from source
-cd /opt
-git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp
-wget -O Hc2vpp-Add-VES-agent-for-vG-MUX.patch ${HC2VPP_PATCH_URL}
-
-apt-get install -y maven
-cat > ~/.m2/settings.xml << EOF
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- vi: set et smarttab sw=2 tabstop=2: -->
-<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
-
- <profiles>
- <profile>
- <id>fd.io-release</id>
- <repositories>
- <repository>
- <id>fd.io-mirror</id>
- <name>fd.io-mirror</name>
- <url>https://nexus.fd.io/content/groups/public/</url>
- <releases>
- <enabled>true</enabled>
- <updatePolicy>never</updatePolicy>
- </releases>
- <snapshots>
- <enabled>false</enabled>
- </snapshots>
- </repository>
- </repositories>
- <pluginRepositories>
- <pluginRepository>
- <id>fd.io-mirror</id>
- <name>fd.io-mirror</name>
- <url>https://nexus.fd.io/content/repositories/public/</url>
- <releases>
- <enabled>true</enabled>
- <updatePolicy>never</updatePolicy>
- </releases>
- <snapshots>
- <enabled>false</enabled>
- </snapshots>
- </pluginRepository>
- </pluginRepositories>
- </profile>
-
- <profile>
- <id>fd.io-snapshots</id>
- <repositories>
- <repository>
- <id>fd.io-snapshot</id>
- <name>fd.io-snapshot</name>
- <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
- <releases>
- <enabled>false</enabled>
- </releases>
- <snapshots>
- <enabled>true</enabled>
- </snapshots>
- </repository>
- </repositories>
- <pluginRepositories>
- <pluginRepository>
- <id>fd.io-snapshot</id>
- <name>fd.io-snapshot</name>
- <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
- <releases>
- <enabled>false</enabled>
- </releases>
- <snapshots>
- <enabled>true</enabled>
- </snapshots>
- </pluginRepository>
- </pluginRepositories>
- </profile>
- <profile>
- <id>opendaylight-snapshots</id>
- <repositories>
- <repository>
- <id>opendaylight-snapshot</id>
- <name>opendaylight-snapshot</name>
- <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
- <releases>
- <enabled>false</enabled>
- </releases>
- <snapshots>
- <enabled>true</enabled>
- </snapshots>
- </repository>
- </repositories>
- <pluginRepositories>
- <pluginRepository>
- <id>opendaylight-shapshot</id>
- <name>opendaylight-snapshot</name>
- <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
- <releases>
- <enabled>false</enabled>
- </releases>
- <snapshots>
- <enabled>true</enabled>
- </snapshots>
- </pluginRepository>
- </pluginRepositories>
- </profile>
- </profiles>
-
- <activeProfiles>
- <activeProfile>fd.io-release</activeProfile>
- <activeProfile>fd.io-snapshots</activeProfile>
- <activeProfile>opendaylight-snapshots</activeProfile>
- </activeProfiles>
-</settings>
+cat > /etc/vpp/setup.gate << EOF
+set int state ${BNG_MUX_NIC} up
+set int ip address ${BNG_MUX_NIC} ${MUX_TO_BNG_IP}/${BNG_MUX_CIDR#*/}
+
+set int state ${MUX_GW_NIC} up
+set int ip address ${MUX_GW_NIC} ${MUX_GW_IP}/${MUX_GW_CIDR#*/}
+ip route add ${BRG_BNG_CIDR} via ${BNG_TO_MUX_IP} ${BNG_MUX_NIC}
EOF
-cd hc2vpp
-patch -p1 < ../Hc2vpp-Add-VES-agent-for-vG-MUX.patch
-mvn clean install
-l_version=$(cat pom.xml | grep "<version>" | head -1)
-l_version=$(echo "${l_version%<*}")
-l_version=$(echo "${l_version#*>}")
-mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb
-sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json
# Create systemctl service for Honeycomb
cat > /etc/systemd/system/honeycomb.service << EOF
[Service]
ExecStart=/opt/honeycomb/honeycomb
+ExecStop=/opt/reset_ves_mode.sh
Restart=always
RestartSec=10
EOF
systemctl enable /etc/systemd/system/honeycomb.service
-#Create a systemd service for auto-save
-cat > /usr/bin/save_config << EOF
+# Create script that is used to reset the ves mode configuration
+# when the honeycomb service is stopped
+cat > /opt/reset_ves_mode.sh << EOF
+#!/bin/bash
+mode_data=\$(curl -X GET -u admin:admin http://127.0.0.1:8183/restconf/config/vesagent:vesagent/mode 2>/dev/null | sed s/\"base-packet-loss\":[0-9]\*,/\"base-packet-loss\":0,/)
+if [[ "\${mode_data}" != "" ]]
+then
+ curl -X DELETE -u admin:admin http://127.0.0.1:8183/restconf/config/vesagent:vesagent/mode
+ curl -H "Content-Type:application/json" --data "\${mode_data}" -X POST -u admin:admin http://127.0.0.1:8183/restconf/config/vesagent:vesagent
+fi
+EOF
+ chmod a+x /opt/reset_ves_mode.sh
+
+ #Create a systemd service for auto-save
+ cat > /usr/bin/save_config << EOF
#!/bin/bash
#########################################################################
#
write_startup_scripts()
{
- local cmd=${2}
- local is_add=${1}
+ local cmd=\${2}
+ local is_add=\${1}
- if [[ ${is_add} == add ]] ;then
+ if [[ \${is_add} == add ]] ;then
while read -r line
do
- if [[ ${line} == ${cmd} ]] ;then
+ if [[ \${line} == \${cmd} ]] ;then
return 0
fi
- done < ${VPP_SETUP_GATE}
+ done < \${VPP_SETUP_GATE}
- echo "${cmd}" >> ${VPP_SETUP_GATE}
+ echo "\${cmd}" >> \${VPP_SETUP_GATE}
else
while read -r line
do
- if [[ ${line} == ${cmd} ]] ;then
- sed -i "/${line}/d" ${VPP_SETUP_GATE}
+ if [[ \${line} == \${cmd} ]] ;then
+ sed -i "/\${line}/d" \${VPP_SETUP_GATE}
return 0
fi
- done < ${VPP_SETUP_GATE}
- fi
-}
-
-# Saves the VES agent configuration to the startup script.
-#
-# Get the current VES agent configuration from the bash command:
-# $vppctl show ves agent
-# Server Addr Server Port Interval Enabled
-# 127.0.0.1 8080 10 True
-# Set the VES agent configuration with the bash command:
-# $vppctl set ves agent server 127.0.0.1 port 8080 intval 10
-#
-save_ves_config()
-{
- local server=""
- local port=""
- local intval=""
-
- local ves_config=`vppctl show ves agent | head -2 | tail -1`
- if [ "${ves_config}" != "" ] ;then
- server=`echo ${ves_config} | awk '{ print $1 }'`
- port=`echo ${ves_config} | awk '{ print $2 }'`
- intval=`echo ${ves_config} | awk '{ print $3 }'`
- write_startup_scripts add "set ves agent server ${server} port ${port} intval ${intval}"
+ done < \${VPP_SETUP_GATE}
fi
}
# Save the VxLAN Tunnel Configuration to the startup script.
#
# Get the current VxLAN tunnel configuration with bash command:
-# $vppctl show vxlan tunnel
+# \$vppctl show vxlan tunnel
# [0] src 10.3.0.2 dst 10.1.0.20 vni 100 sw_if_index 1 encap_fib_index 0 fib_entry_index 7 decap_next l2
# [1] src 10.5.0.20 dst 10.5.0.21 vni 100 sw_if_index 2 encap_fib_index 0 fib_entry_index 8 decap_next l2
# Set the VxLAN Tunnel with the bash command:
-# $vppctl create vxlan tunnel src 10.3.0.2 dst 10.1.0.20 vni 100
+# \$vppctl create vxlan tunnel src 10.3.0.2 dst 10.1.0.20 vni 100
# vxlan_tunnel0
save_vxlan_tunnel()
{
vppctl show vxlan tunnel | while read line
do
- if [ "${line}" != "" ] ;then
- src=`echo ${line} | awk '{ print $3 }'`
- dst=`echo ${line} | awk '{ print $5 }'`
- vni=`echo ${line} | awk '{ print $7 }'`
+ if [ "\${line}" != "" ] ;then
+ src=\`echo \${line} | awk '{ print \$3 }'\`
+ dst=\`echo \${line} | awk '{ print \$5 }'\`
+ vni=\`echo \${line} | awk '{ print \$7 }'\`
- write_startup_scripts add "create vxlan tunnel src ${src} dst ${dst} vni ${vni}"
+ write_startup_scripts add "create vxlan tunnel src \${src} dst \${dst} vni \${vni}"
fi
done
}
# Save the VxLAN tunnel L2 xconnect configuration to the startup script.
#
# Get the Current L2 Address configuration with bash command:
-# $vppctl show int addr
+# \$vppctl show int addr
# local0 (dn):
# vxlan_tunnel0 (up):
# l2 xconnect vxlan_tunnel1
# vxlan_tunnel1 (up):
# l2 xconnect vxlan_tunnel0
# Save the VxLAN tunnel L2 xconnect configuration with bash command:
-# $vppctl set interface l2 xconnect vxlan_tunnel0 vxlan_tunnel1
+# \$vppctl set interface l2 xconnect vxlan_tunnel0 vxlan_tunnel1
#
save_vxlan_xconnect()
{
vppctl show int addr | while read line
do
- if [[ ${line} == vxlan_tunnel* ]] ;then
+ if [[ \${line} == vxlan_tunnel* ]] ;then
read next
- while [[ ${next} != l2* ]] || [[ ${next} == "" ]]
+ while [[ \${next} != l2* ]] || [[ \${next} == "" ]]
do
- line=`echo ${next}`
+ line=\`echo \${next}\`
read next
done
- if [[ ${next} == l2* ]] ;then
- ingress=`echo ${line} | awk '{ print $1 }'`
- egress=`echo ${next} | awk '{ print $3 }'`
- write_startup_scripts add "set interface l2 xconnect ${ingress} ${egress}"
+ if [[ \${next} == l2* ]] ;then
+ ingress=\`echo \${line} | awk '{ print \$1 }'\`
+ egress=\`echo \${next} | awk '{ print \$3 }'\`
+ write_startup_scripts add "set interface l2 xconnect \${ingress} \${egress}"
fi
fi
done
################################# MAIN ###################################
-save_ves_config
-
save_vxlan_tunnel
save_vxlan_xconnect
EOF
-chmod a+x /usr/bin/save_config
-cat > /etc/systemd/system/autosave.service << EOF
+ chmod a+x /usr/bin/save_config
+ cat > /etc/systemd/system/autosave.service << EOF
[Unit]
Description=Run Scripts at Start and Stop
-Requires=vpp.service
+equires=vpp.service
After=vpp.service
[Service]
# Download DHCP config files
cd /opt
-wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gmux_init.sh
-wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gmux.sh
+unzip -p -j /opt/vcpe-scripts-$SCRIPT_VERSION.zip v_gmux_init.sh > /opt/v_gmux_init.sh
+unzip -p -j /opt/vcpe-scripts-$SCRIPT_VERSION.zip v_gmux.sh > /opt/v_gmux.sh
chmod +x v_gmux_init.sh
chmod +x v_gmux.sh
mv v_gmux.sh /etc/init.d
# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
if [[ $CLOUD_ENV != "rackspace" ]]
then
- sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
- grub-mkconfig -o /boot/grub/grub.cfg
- sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
- sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
- echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
- echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic
- reboot
+ sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
+ grub-mkconfig -o /boot/grub/grub.cfg
+ sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
+ sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
+ echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
+ echo 'Execution of vG-MUX install script completed' > /opt/script_status.txt
+ reboot
fi
./v_gmux_init.sh
+echo 'Execution of vG-MUX install script completed' > /opt/script_status.txt
+