REPO_URL_ARTIFACTS=$(cat /opt/config/repo_url_artifacts.txt)
DEMO_ARTIFACTS_VERSION=$(cat /opt/config/demo_artifacts_version.txt)
INSTALL_SCRIPT_VERSION=$(cat /opt/config/install_script_version.txt)
+VPP_SOURCE_REPO_URL=$(cat /opt/config/vpp_source_repo_url.txt)
+VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/vpp_source_repo_branch.txt)
+VPP_PATCH_URL=$(cat /opt/config/vpp_patch_url.txt)
+HC2VPP_SOURCE_REPO_URL=$(cat /opt/config/hc2vpp_source_repo_url.txt)
+HC2VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/hc2vpp_source_repo_branch.txt)
CLOUD_ENV=$(cat /opt/config/cloud_env.txt)
+# Build states are:
+# 'build' - just build the code
+# 'done' - code is build, install and setup
+# 'auto' - bulid, install and setup
+BUILD_STATE="auto"
+
+if [[ -f /opt/config/compile_state.txt ]]
+then
+ BUILD_STATE=$(cat /opt/config/compile_state.txt)
+fi
+
# Convert Network CIDR to Netmask
cdr2mask () {
- # Number of args to shift, 255..255, first non-255 byte, zeroes
- set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
- [ $1 -gt 1 ] && shift $1 || shift
- echo ${1-0}.${2-0}.${3-0}.${4-0}
+ # Number of args to shift, 255..255, first non-255 byte, zeroes
+ set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
+ [ $1 -gt 1 ] && shift $1 || shift
+ echo ${1-0}.${2-0}.${3-0}.${4-0}
}
# OpenStack network configuration
-if [[ $CLOUD_ENV == "openstack" ]]
+if [[ $BUILD_STATE != "build" ]]
then
- echo 127.0.0.1 $(hostname) >> /etc/hosts
+ if [[ $CLOUD_ENV == "openstack" ]]
+ then
+ echo 127.0.0.1 $(hostname) >> /etc/hosts
- # Allow remote login as root
- mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
- cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
+ # Allow remote login as root
+ mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
+ cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
+ fi
+fi # endif BUILD_STATE != "build"
- MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
+if [[ $BUILD_STATE != "done" ]]
+then
+ # Download required dependencies
+ echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
+ echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
+ apt-get update
+ apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev
+ sleep 1
- IP=$(cat /opt/config/brgemu_net_ipaddr.txt)
- BITS=$(cat /opt/config/brgemu_net_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth2" >> /etc/network/interfaces
- echo "iface eth2 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
+ # Install the tools required for download codes
+ apt-get install -y expect git patch make linux-image-extra-`uname -r`
+ #Download and build the VPP codes
+ cd /opt
+ git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp
+ wget -O VPP-Add-Option82-Nat-Filter-For-vBRG.patch ${VPP_PATCH_URL}
- ifup eth2
-fi
+ cd vpp
+ patch -p1 < ../VPP-Add-Option82-Nat-Filter-For-vBRG.patch
+ expect -c "
+ set timeout 60;
+ spawn make install-dep;
+ expect {
+ \"Do you want to continue?*\" {send \"Y\r\"; interact}
+ }
+ "
-# Download required dependencies
-echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu xenial main" >> /etc/apt/sources.list.d/java.list
-echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu xenial main" >> /etc/apt/sources.list.d/java.list
-apt-get update
-apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev
-sleep 1
-
-# Download DHCP config files
-cd /opt
-wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu_init.sh
-wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu.sh
-chmod +x v_brgemu_init.sh
-chmod +x v_brgemu.sh
-mv v_brgemu.sh /etc/init.d
-update-rc.d v_brgemu.sh defaults
-
-# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
-if [[ $CLOUD_ENV != "rackspace" ]]
+ cd build-root
+ ./bootstrap.sh
+ make V=0 PLATFORM=vpp TAG=vpp install-deb
+
+ # Install the VPP package
+ dpkg -i *.deb
+ systemctl stop vpp
+fi # endif BUILD_STATE != "done"
+
+if [[ $BUILD_STATE != "build" ]]
then
- sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
- grub-mkconfig -o /boot/grub/grub.cfg
- sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
- sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
- echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
- echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic
- reboot
-fi
+ # Auto-start configuration for the VPP
+ cat > /etc/vpp/startup.conf << EOF
+
+unix {
+ nodaemon
+ log /tmp/vpp.log
+ full-coredump
+ cli-listen localhost:5002
+ startup-config /etc/vpp/setup.gate
+}
+
+api-trace {
+ on
+}
+
+api-segment {
+ gid vpp
+}
+
+cpu {
+ ## In the VPP there is one main thread and optionally the user can create worker(s)
+ ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
+
+ ## Manual pinning of thread(s) to CPU core(s)
+
+ ## Set logical CPU core where main thread runs
+ # main-core 1
+
+ ## Set logical CPU core(s) where worker threads are running
+ # corelist-workers 2-3,18-19
+
+ ## Automatic pinning of thread(s) to CPU core(s)
+
+ ## Sets number of CPU core(s) to be skipped (1 ... N-1)
+ ## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
+ ## The main thread is automatically pinned to the first available CPU core and worker(s)
+ ## are pinned to next free CPU core(s) after core assigned to main thread
+ # skip-cores 4
+
+ ## Specify a number of workers to be created
+ ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
+ ## and main thread's CPU core
+ # workers 2
+
+ ## Set scheduling policy and priority of main and worker threads
+
+ ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
+ ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
+ # scheduler-policy fifo
+
+ ## Scheduling priority is used only for "real-time policies (fifo and rr),
+ ## and has to be in the range of priorities supported for a particular policy
+ # scheduler-priority 50
+}
+
+# dpdk {
+ ## Change default settings for all intefaces
+ # dev default {
+ ## Number of receive queues, enables RSS
+ ## Default is 1
+ # num-rx-queues 3
+
+ ## Number of transmit queues, Default is equal
+ ## to number of worker threads or 1 if no workers treads
+ # num-tx-queues 3
+
+ ## Number of descriptors in transmit and receive rings
+ ## increasing or reducing number can impact performance
+ ## Default is 1024 for both rx and tx
+ # num-rx-desc 512
+ # num-tx-desc 512
+
+ ## VLAN strip offload mode for interface
+ ## Default is off
+ # vlan-strip-offload on
+ # }
+
+ ## Whitelist specific interface by specifying PCI address
+ # dev 0000:02:00.0
+ ## Whitelist specific interface by specifying PCI address and in
+ ## addition specify custom parameters for this interface
+ # dev 0000:02:00.1 {
+ # num-rx-queues 2
+ # }
+
+ ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci
+ ## and uio_pci_generic (default)
+ # uio-driver vfio-pci
+
+ ## Disable mutli-segment buffers, improves performance but
+ ## disables Jumbo MTU support
+ # no-multi-seg
+
+ ## Increase number of buffers allocated, needed only in scenarios with
+ ## large number of interfaces and worker threads. Value is per CPU socket.
+ ## Default is 16384
+ # num-mbufs 128000
+
+ ## Change hugepages allocation per-socket, needed only if there is need for
+ ## larger number of mbufs. Default is 256M on each detected CPU socket
+ # socket-mem 2048,2048
+# }
+
+EOF
+
+ #Get list of network device PCI bus addresses
+ get_nic_pci_list() {
+ while read -r line ; do
+ if [ "$line" != "${line#*network device}" ];
+ then
+ echo -n "${line%% *} "
+ fi
+ done < <(lspci)
+ }
+
+ NICS=$(get_nic_pci_list)
+ NICS=`echo ${NICS} | sed 's/[0]\+\([0-9]\)/\1/g' | sed 's/[.:]/\//g'`
+
+ BRG_BNG_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 2` # second interface in list
+ echo $BRG_BNG_NIC > /opt/config/brg_nic.txt
+
+
+ cat > /etc/vpp/setup.gate << EOF
+set int state ${BRG_BNG_NIC} up
+set dhcp client intfc ${BRG_BNG_NIC} hostname brg-emulator
+EOF
+
+echo "sdnc_ip: $(cat /opt/config/sdnc_ip.txt)" > /opt/config/ip.txt
+echo "hcip: 192.168.4.20" >> /opt/config/ip.txt
+
+
+ cat > /opt/bind_nic.sh << 'EOF'
+#!/bin/bash
+while :
+do
+ if [[ ! $(ps -aux | grep [[:alnum:]]*/vpp/startup.conf | wc -l) = 2 ]];
+ then
+ echo "vpp not running"
+ else
+ break
+ fi
+done
+
+
+BRG_BNG_NIC=$(cat /opt/config/brg_nic.txt)
+sdnc_ip=$(cat /opt/config/sdnc_ip.txt)
+
+lstack_tap=$(vppctl tap connect lstack)
+vppctl set int state $lstack_tap up
+
+vppctl set interface l2 bridge $lstack_tap 10 0
+vppctl set bridge-domain arp term 10
+
+tap0_tap=$(vppctl tap connect tap0)
+sleep 3
+vppctl set int state $tap0_tap up
+vppctl set int ip addr $tap0_tap 20.0.0.40/24
+ifconfig tap0 192.168.4.20/24
+route add -host $sdnc_ip tap0
+route add -host 20.0.0.40 tap0
+vppctl ip route add 192.168.4.0/24 via $tap0_tap
+vppctl set interface snat in $tap0_tap out ${BRG_BNG_NIC}
+vppctl snat add interface address ${BRG_BNG_NIC}
+
+#Get HW addr of $tap0_tap
+while read -r hw
+do
+ if [[ "$hw" = $tap0_tap* ]];
+ then
+ read -r hw
+ hw_addr=${hw##* }
+ break
+ fi
+done < <(vppctl show hardware)
+
+arp -s $sdnc_ip $hw_addr
+arp -s 20.0.0.40 $hw_addr
+
+#Get HW addr of tap0
+var=$(ifconfig tap0)
+var=${var##*HWaddr}
+var=${var%inet*}
+tap0_addr=${var%inet*}
+
+vppctl set ip arp $tap0_tap 192.168.4.20 $tap0_addr
+
+EOF
+ chmod +x /opt/bind_nic.sh
+
+ #set nat rule
+ cat > /opt/set_nat.sh << 'EOF'
+#! /bin/bash
+
+while :
+do
+ if [[ ! $(ps -aux | grep [[:alnum:]]*/vpp/startup.conf | wc -l) = 2 ]];
+ then
+ #echo "vpp not running"
+ continue
+ fi
+
+ flag=0
+ while read -r line
+ do
+ if [ flag = 0 ];
+ then
+ re=${line#*/[0-9]/[0-9]}
+ if [ "$line" != "$re" ];
+ then
+ flag=1
+ else
+ flag=0
+ continue
+ fi
+ else
+ ip=${line%/*}
+ if [[ $ip = *\.*\.*\.* ]];
+ then
+ #echo "ip address is $ip"
+ if [ ! -f /opt/config/ip.txt ];
+ then
+ echo "file /opt/config/ip.txt doesn't exists"
+ continue
+ fi
+ while read -r tap_ip
+ do
+ if [[ $tap_ip = hcip* ]];
+ then
+ tap_ip=${tap_ip#*" "}
+ echo "hc tap ip address is $tap_ip"
+ vppctl snat add static mapping tcp local $tap_ip 8183 external $ip 8183
+ exit 0
+ fi
+ done < /opt/config/ip.txt
+ else
+ if [[ ! $ip = */[0-9] ]];
+ then
+ flag=0
+ #echo "not correct"
+ fi
+ fi
+ fi
+ done < <(vppctl show int addr)
+ sleep 1
+done
+EOF
+
+ chmod +x /opt/set_nat.sh
+
+ #Create script to run bind_nic.sh and set_nat.sh
+ cat > /opt/nat_service.sh << 'EOF'
+#! /bin/bash
+
+sleep 15
+/opt/bind_nic.sh
+/opt/set_nat.sh
+
+EOF
+ chmod +x /opt/nat_service.sh
+
+fi # endif BUILD_STATE != "build"
+
+if [[ $BUILD_STATE != "done" ]]
+then
+
+ # Download and install HC2VPP from source
+ cd /opt
+ git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp
+
+ apt-get -f -y install
+ apt-get install -y maven
+ mkdir -p /root/.m2
+ cat > ~/.m2/settings.xml << EOF
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- vi: set et smarttab sw=2 tabstop=2: -->
+<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
+ xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+ xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
+
+ <profiles>
+ <profile>
+ <id>fd.io-release</id>
+ <repositories>
+ <repository>
+ <id>fd.io-mirror</id>
+ <name>fd.io-mirror</name>
+ <url>https://nexus.fd.io/content/groups/public/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>never</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>fd.io-mirror</id>
+ <name>fd.io-mirror</name>
+ <url>https://nexus.fd.io/content/repositories/public/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>never</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+
+ <profile>
+ <id>fd.io-snapshots</id>
+ <repositories>
+ <repository>
+ <id>fd.io-snapshot</id>
+ <name>fd.io-snapshot</name>
+ <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>fd.io-snapshot</id>
+ <name>fd.io-snapshot</name>
+ <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+ <profile>
+ <id>opendaylight-snapshots</id>
+ <repositories>
+ <repository>
+ <id>opendaylight-snapshot</id>
+ <name>opendaylight-snapshot</name>
+ <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>opendaylight-shapshot</id>
+ <name>opendaylight-snapshot</name>
+ <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+ </profiles>
+
+ <activeProfiles>
+ <activeProfile>fd.io-release</activeProfile>
+ <activeProfile>fd.io-snapshots</activeProfile>
+ <activeProfile>opendaylight-snapshots</activeProfile>
+ </activeProfiles>
+</settings>
+EOF
+
+ cd hc2vpp
+ mvn clean install
+ l_version=$(cat pom.xml | grep "<version>" | head -1)
+ l_version=$(echo "${l_version%<*}")
+ l_version=$(echo "${l_version#*>}")
+ mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb
+ sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json
+
+ # Disable automatic upgrades
+ if [[ $CLOUD_ENV != "rackspace" ]]
+ then
+ echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic
+ sed -i 's/\(APT::Periodic::Unattended-Upgrade\) "1"/\1 "0"/' /etc/apt/apt.conf.d/20auto-upgrades
+ fi
+fi # endif BUILD_STATE != "done"
+
+if [[ $BUILD_STATE != "build" ]]
+then
+ # Create systemctl service for Honeycomb
+ cat > /etc/systemd/system/honeycomb.service << EOF
+[Unit]
+Description=Honeycomb Agent for the VPP control plane
+Documentation=https://wiki.fd.io/view/Honeycomb
+Requires=vpp.service
+After=vpp.service
+
+[Service]
+ExecStart=/opt/honeycomb/honeycomb
+Restart=always
+RestartSec=10
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ systemctl enable /etc/systemd/system/honeycomb.service
+
+
+ # Create systemctl service for nat script
+ cat > /etc/systemd/system/nat.service << EOF
+[Unit]
+Description=Runs vbrg scripts for nat configuration
+Requires=vpp.service
+After=vpp.service
+
+[Service]
+RemainAfterExit=True
+ExecStart=/opt/nat_service.sh
+Restart=always
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ systemctl enable /etc/systemd/system/nat.service
+
+ # Download DHCP config files
+ cd /opt
+ wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu_init.sh
+ wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu.sh
+ sed -i '/# Provides:/c\# Provides: vbrg ' /opt/v_brgemu.sh
+ chmod +x v_brgemu_init.sh
+ chmod +x v_brgemu.sh
+ mv v_brgemu.sh /etc/init.d
+ update-rc.d v_brgemu.sh defaults
+
+ # Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
+ if [[ $CLOUD_ENV != "rackspace" ]]
+ then
+ sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
+ grub-mkconfig -o /boot/grub/grub.cfg
+ sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
+ sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
+ echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
+ reboot
+ fi
-./v_brgemu_init.sh
\ No newline at end of file
+ ./v_brgemu_init.sh
+fi # endif BUILD_STATE != "build"
Code Review / demo.git / blobdiff