#!/bin/bash
+set -o xtrace # print commands during script execution
+set -o errexit # exit on command errors
REPO_URL_BLOB=$(cat /opt/config/repo_url_blob.txt)
REPO_URL_ARTIFACTS=$(cat /opt/config/repo_url_artifacts.txt)
DEMO_ARTIFACTS_VERSION=$(cat /opt/config/demo_artifacts_version.txt)
INSTALL_SCRIPT_VERSION=$(cat /opt/config/install_script_version.txt)
+VPP_SOURCE_REPO_URL=$(cat /opt/config/vpp_source_repo_url.txt)
+VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/vpp_source_repo_branch.txt)
+VPP_PATCH_URL=$(cat /opt/config/vpp_patch_url.txt)
CLOUD_ENV=$(cat /opt/config/cloud_env.txt)
+BNG_GMUX_NET_CIDR=$(cat /opt/config/bng_gmux_net_cidr.txt)
+BNG_GMUX_NET_IPADDR=$(cat /opt/config/bng_gmux_net_ipaddr.txt)
+BRGEMU_BNG_NET_CIDR=$(cat /opt/config/brgemu_bng_net_cidr.txt)
+BRGEMU_BNG_NET_IPADDR=$(cat /opt/config/brgemu_bng_net_ipaddr.txt)
+CPE_SIGNAL_NET_CIDR=$(cat /opt/config/cpe_signal_net_cidr.txt)
+CPE_SIGNAL_NET_IPADDR=$(cat /opt/config/cpe_signal_net_ipaddr.txt)
+SDNC_IP_ADDR=$(cat /opt/config/sdnc_ip_addr.txt)
+
+# Build states are:
+# 'build' - just build the code
+# 'done' - code is build, install and setup
+# 'auto' - bulid, install and setup
+BUILD_STATE="auto"
+if [[ -f /opt/config/compile_state.txt ]]
+then
+ BUILD_STATE=$(cat /opt/config/compile_state.txt)
+fi
# Convert Network CIDR to Netmask
cdr2mask () {
}
# OpenStack network configuration
-if [[ $CLOUD_ENV == "openstack" ]]
+if [[ $BUILD_STATE != "build" ]]
then
- echo 127.0.0.1 $(hostname) >> /etc/hosts
-
- # Allow remote login as root
- mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
- cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
-
- MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
-
- IP=$(cat /opt/config/brgemu_bng_net_ipaddr.txt)
- BITS=$(cat /opt/config/brgemu_bng_net_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth1" >> /etc/network/interfaces
- echo "iface eth1 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- IP=$(cat /opt/config/oam_ipaddr.txt)
- BITS=$(cat /opt/config/oam_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth2" >> /etc/network/interfaces
- echo "iface eth2 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- IP=$(cat /opt/config/cpe_signal_net_ipaddr.txt)
- BITS=$(cat /opt/config/cpe_signal_net_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth3" >> /etc/network/interfaces
- echo "iface eth3 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- IP=$(cat /opt/config/bng_gmux_net_ipaddr.txt)
- BITS=$(cat /opt/config/bng_gmux_net_cidr.txt | cut -d"/" -f2)
- NETMASK=$(cdr2mask $BITS)
- echo "auto eth4" >> /etc/network/interfaces
- echo "iface eth4 inet static" >> /etc/network/interfaces
- echo " address $IP" >> /etc/network/interfaces
- echo " netmask $NETMASK" >> /etc/network/interfaces
- echo " mtu $MTU" >> /etc/network/interfaces
-
- ifup eth1
- ifup eth2
- ifup eth3
- ifup eth4
-fi
+ if [[ $CLOUD_ENV == "openstack" ]]
+ then
+ echo 127.0.0.1 $(hostname) >> /etc/hosts
+
+ # Allow remote login as root
+ mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
+ cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
+
+ MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
-# Download required dependencies
-echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
-echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
-apt-get update
-apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev
-sleep 1
-
-# Download DHCP config files
-cd /opt
-wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_bng_init.sh
-wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_bng.sh
-chmod +x v_bng_init.sh
-chmod +x v_bng.sh
-mv v_bng.sh /etc/init.d
-update-rc.d v_bng.sh defaults
-
-# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
-if [[ $CLOUD_ENV != "rackspace" ]]
+ IP=$(cat /opt/config/oam_ipaddr.txt)
+ BITS=$(cat /opt/config/oam_cidr.txt | cut -d"/" -f2)
+ NETMASK=$(cdr2mask $BITS)
+ echo "auto eth2" >> /etc/network/interfaces
+ echo "iface eth2 inet static" >> /etc/network/interfaces
+ echo " address $IP" >> /etc/network/interfaces
+ echo " netmask $NETMASK" >> /etc/network/interfaces
+ echo " mtu $MTU" >> /etc/network/interfaces
+
+ # eth2 probably doesn't exist yet and we should reboot after this anyway
+ # ifup eth2
+ fi
+fi # endif BUILD_STATE != "build"
+
+if [[ $BUILD_STATE != "done" ]]
then
- sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
- grub-mkconfig -o /boot/grub/grub.cfg
- sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
- sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
- echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
- echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic
- reboot
-fi
+ # Enable IPV4 forwarding through kernel
+ sed -i 's/^.*\(net.ipv4.ip_forward\).*/\1=1/g' /etc/sysctl.conf
+ sysctl -p /etc/sysctl.conf
+
+ # Download required dependencies
+ echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
+ echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
+ apt-get update
+ apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev
+ sleep 1
+
+ # Install the tools required for download codes
+ apt-get install -y expect git patch make autoconf libtool linux-image-extra-`uname -r`
+
+ #Download and build the VPP codes
+ cd /opt
+ git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp
+ wget -O Vpp-Integrate-FreeRADIUS-Client-for-vBNG.patch ${VPP_PATCH_URL}
+ cd vpp
+ # The patch will place a "dummy" version of dhcp.api.h so the build will succeed
+ mkdir -p build-root/build-vpp-native/vpp/vnet/dhcp/
+ patch -p1 < ../Vpp-Integrate-FreeRADIUS-Client-for-vBNG.patch
+ UNATTENDED='y' make install-dep
+
+ # Install the FreeRADIUS client since we need the lib
+ cd /opt
+ git clone https://github.com/FreeRADIUS/freeradius-client.git
+ cd freeradius-client
+ ./configure
+ make && make install
+ cd /usr/local/lib && ln -s -f libfreeradius-client.so.2.0.0 libfreeradiusclient.so
+ ldconfig
+
+ cd /opt/vpp/build-root
+ ./bootstrap.sh
+ make V=0 PLATFORM=vpp TAG=vpp install-deb
+
+ # install additional dependencies for vpp
+ apt-get install -y python-cffi python-ply python-pycparser
+
+ # Install the VPP package
+ cd /opt/vpp/build-root
+ dpkg -i *.deb
+ systemctl stop vpp
+
+ # Disable automatic upgrades
+ if [[ $CLOUD_ENV != "rackspace" ]]
+ then
+ echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic
+ sed -i 's/\(APT::Periodic::Unattended-Upgrade\) "1"/\1 "0"/' /etc/apt/apt.conf.d/20auto-upgrades
+ fi
+
+fi # endif BUILD_STATE != "done"
+
+if [[ $BUILD_STATE != "build" ]]
+then
+ # Auto-start configuration for the VPP
+ cat > /etc/vpp/startup.conf << EOF
+
+unix {
+ nodaemon
+ log /tmp/vpp.log
+ full-coredump
+ cli-listen localhost:5002
+ startup-config /etc/vpp/setup.gate
+}
+
+api-trace {
+ on
+}
+
+api-segment {
+ gid vpp
+}
+
+cpu {
+ ## In the VPP there is one main thread and optionally the user can create worker(s)
+ ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
+
+ ## Manual pinning of thread(s) to CPU core(s)
+
+ ## Set logical CPU core where main thread runs
+ # main-core 1
+
+ ## Set logical CPU core(s) where worker threads are running
+ # corelist-workers 2-3,18-19
+
+ ## Automatic pinning of thread(s) to CPU core(s)
+
+ ## Sets number of CPU core(s) to be skipped (1 ... N-1)
+ ## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
+ ## The main thread is automatically pinned to the first available CPU core and worker(s)
+ ## are pinned to next free CPU core(s) after core assigned to main thread
+ # skip-cores 4
+
+ ## Specify a number of workers to be created
+ ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
+ ## and main thread's CPU core
+ # workers 2
+
+ ## Set scheduling policy and priority of main and worker threads
+
+ ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
+ ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
+ # scheduler-policy fifo
+
+ ## Scheduling priority is used only for "real-time policies (fifo and rr),
+ ## and has to be in the range of priorities supported for a particular policy
+ # scheduler-priority 50
+}
+
+# dpdk {
+ ## Change default settings for all intefaces
+ # dev default {
+ ## Number of receive queues, enables RSS
+ ## Default is 1
+ # num-rx-queues 3
+
+ ## Number of transmit queues, Default is equal
+ ## to number of worker threads or 1 if no workers treads
+ # num-tx-queues 3
+
+ ## Number of descriptors in transmit and receive rings
+ ## increasing or reducing number can impact performance
+ ## Default is 1024 for both rx and tx
+ # num-rx-desc 512
+ # num-tx-desc 512
+
+ ## VLAN strip offload mode for interface
+ ## Default is off
+ # vlan-strip-offload on
+ # }
+
+ ## Whitelist specific interface by specifying PCI address
+ # dev 0000:02:00.0
+
+ ## Whitelist specific interface by specifying PCI address and in
+ ## addition specify custom parameters for this interface
+ # dev 0000:02:00.1 {
+ # num-rx-queues 2
+ # }
+
+ ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci
+ ## and uio_pci_generic (default)
+ # uio-driver vfio-pci
+
+ ## Disable mutli-segment buffers, improves performance but
+ ## disables Jumbo MTU support
+ # no-multi-seg
+
+ ## Increase number of buffers allocated, needed only in scenarios with
+ ## large number of interfaces and worker threads. Value is per CPU socket.
+ ## Default is 16384
+ # num-mbufs 128000
+
+ ## Change hugepages allocation per-socket, needed only if there is need for
+ ## larger number of mbufs. Default is 256M on each detected CPU socket
+ # socket-mem 2048,2048
+# }
+
+EOF
+
+ get_nic_pci_list() {
+ while read -r line ; do
+ if [ "$line" != "${line#*network device}" ]; then
+ echo -n "${line%% *} "
+ fi
+ done < <(lspci)
+ }
+
+ NICS=$(get_nic_pci_list)
+ NICS=`echo ${NICS} | sed 's/[0]\+\([0-9]\)/\1/g' | sed 's/[.:]/\//g'`
+
+ BRGEMU_BNG_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 2` # second interface in list
+ CPE_SIGNAL_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 4` # fourth interface in list
+ BNG_GMUX_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 5` # fifth interface in list
+
+ cat > /etc/vpp/setup.gate << EOF
+set int state ${BRGEMU_BNG_NIC} up
+set interface ip address ${BRGEMU_BNG_NIC} ${BRGEMU_BNG_NET_IPADDR}/${BRGEMU_BNG_NET_CIDR#*/}
+
+set int state ${CPE_SIGNAL_NIC} up
+set interface ip address ${CPE_SIGNAL_NIC} ${CPE_SIGNAL_NET_IPADDR}/${CPE_SIGNAL_NET_CIDR#*/}
+
+set int state ${BNG_GMUX_NIC} up
+set interface ip address ${BNG_GMUX_NIC} ${BNG_GMUX_NET_IPADDR}/${BNG_GMUX_NET_CIDR#*/}
+
+set vbng dhcp4 remote 10.4.0.1 local ${CPE_SIGNAL_NET_IPADDR}
+set vbng aaa config /etc/vpp/vbng-aaa.cfg nas-port 5060
+
+tap connect tap0 address 192.168.40.40/24
+set int state tap-0 up
+set int ip address tap-0 192.168.40.41/24
+ip route add ${SDNC_IP_ADDR}/32 via 192.168.40.40 tap-0
+
+EOF
+
+ cat > /etc/vpp/vbng-aaa.cfg << EOF
+# General settings
+
+# specify which authentication comes first respectively which
+# authentication is used. possible values are: "radius" and "local".
+# if you specify "radius,local" then the RADIUS server is asked
+# first then the local one. if only one keyword is specified only
+# this server is asked.
+auth_order radius,local
+
+# maximum login tries a user has
+login_tries 2
+
+# timeout for all login tries
+# if this time is exceeded the user is kicked out
+login_timeout 5
+
+# name of the nologin file which when it exists disables logins.
+# it may be extended by the ttyname which will result in
+# a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable
+# logins on /dev/ttyS2)
+nologin /etc/nologin
+
+# name of the issue file. it's only display when no username is passed
+# on the radlogin command line
+issue /usr/local/etc/radiusclient/issue
+
+# RADIUS settings
+
+# RADIUS server to use for authentication requests. this config
+# item can appear more then one time. if multiple servers are
+# defined they are tried in a round robin fashion if one
+# server is not answering.
+# optionally you can specify a the port number on which is remote
+# RADIUS listens separated by a colon from the hostname. if
+# no port is specified /etc/services is consulted of the radius
+# service. if this fails also a compiled in default is used.
+#authserver 10.4.0.2
+authserver localhost
+
+# RADIUS server to use for accouting requests. All that I
+# said for authserver applies, too.
+#
+#acctserver 10.4.0.2
+acctserver localhost
+
+# file holding shared secrets used for the communication
+# between the RADIUS client and server
+servers /usr/local/etc/radiusclient/servers
+
+# dictionary of allowed attributes and values
+# just like in the normal RADIUS distributions
+dictionary /usr/local/etc/radiusclient/dictionary
+
+# program to call for a RADIUS authenticated login
+login_radius /usr/local/sbin/login.radius
+
+# file which holds sequence number for communication with the
+# RADIUS server
+seqfile /var/run/radius.seq
+
+# file which specifies mapping between ttyname and NAS-Port attribute
+mapfile /usr/local/etc/radiusclient/port-id-map
+
+# default authentication realm to append to all usernames if no
+# realm was explicitly specified by the user
+# the radiusd directly form Livingston doesnt use any realms, so leave
+# it blank then
+default_realm
+
+# time to wait for a reply from the RADIUS server
+radius_timeout 10
+
+# resend request this many times before trying the next server
+radius_retries 3
+
+# The length of time in seconds that we skip a nonresponsive RADIUS
+# server for transaction requests. Server(s) being in the "dead" state
+# are tried only after all other non-dead servers have been tried and
+# failed or timeouted. The deadtime interval starts when the server
+# does not respond to an authentication/accounting request transmissions.
+# When the interval expires, the "dead" server would be re-tried again,
+# and if it's still down then it will be considered "dead" for another
+# such interval and so on. This option is no-op if there is only one
+# server in the list. Set to 0 in order to disable the feature.
+radius_deadtime 0
+
+# local address from which radius packets have to be sent
+bindaddr *
+
+# LOCAL settings
+
+# program to execute for local login
+# it must support the -f flag for preauthenticated login
+login_local /bin/login
+EOF
+
+ cat >> /usr/local/etc/radiusclient/dictionary << EOF
+
+#
+# DHCP Proxy/Relay attributes
+#
+ATTRIBUTE DHCP-Agent-Circuit-Id 82.1 integer
+ATTRIBUTE DHCP-Agent-Remote-Id 82.2 string
+ATTRIBUTE DHCP-Relay-Circuit-Id 82.1 integer
+ATTRIBUTE DHCP-Relay-Remote-Id 82.2 string
+
+EOF
+
+ cat >> /usr/local/etc/radiusclient/servers << EOF
+10.4.0.2 testing123
+localhost/localhost testing123
+
+EOF
+
+ # Download DHCP config files
+ cd /opt
+ wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_bng_init.sh
+ wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_bng.sh
+ chmod +x v_bng_init.sh
+ chmod +x v_bng.sh
+ sed -i 's/^\(# Provides:\).*/\1 v_bng/g' ./v_bng.sh
+ mv v_bng.sh /etc/init.d
+ update-rc.d v_bng.sh defaults
+
+ # Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
+ if [[ $CLOUD_ENV != "rackspace" ]]
+ then
+ sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
+ grub-mkconfig -o /boot/grub/grub.cfg
+ sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
+ touch /etc/udev/rules.d/70-persistent-net.rules
+ sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
+ echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
+ reboot
+ fi
+
+ ./v_bng_init.sh
+fi # endif BUILD_STATE != "build"
-./v_bng_init.sh
\ No newline at end of file