</when>
</choice>
</route>
-
- <route id="load-loop">
- <from uri="direct:load-loop" />
- <setBody>
- <simple>${header.loopName}</simple>
- </setBody>
- <setProperty propertyName="loopObject">
- <method
- ref="org.onap.clamp.loop.LoopService"
- method="getLoop" />
- </setProperty>
-
- <when>
- <simple>${exchangeProperty[loopObject]} == null</simple>
- <setHeader headerName="CamelHttpResponseCode">
- <constant>404</constant>
- </setHeader>
- <log
- loggingLevel="WARNING"
- message="Loop not found in database: ${body}" />
- <stop />
- </when>
- </route>
-
- <route id="create-micro-service-policy">
- <from uri="direct:create-micro-service-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Creating Micro Service Policy: ${exchangeProperty[microServicePolicy].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Create Micro Service Policy')" />
- <setBody>
- <simple>${exchangeProperty[microServicePolicy].createPolicyPayload()}
- </simple>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>POST</constant>
- </setHeader>
- <setHeader headerName="Content-Type">
- <constant>application/json</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to create microservice policy: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/${exchangeProperty[microServicePolicy].getModelType()}/versions/1.0.0/policies"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/${exchangeProperty[microServicePolicy].getModelType()}/versions/1.0.0/policies?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authUsername={{clamp.config.policy.api.userName}}&authPassword={{clamp.config.policy.api.password}}" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[microServicePolicy].getName()} creation
- status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="delete-micro-service-policy">
- <from uri="direct:delete-micro-service-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Deleting Micro Service Policy: ${exchangeProperty[microServicePolicy].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Delete Micro Service Policy')" />
- <setBody>
- <constant>null</constant>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>DELETE</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to delete microservice policy: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/${exchangeProperty[microServicePolicy].getModelType()}/versions/1.0.0/policies/${exchangeProperty[microServicePolicy].getName()}/versions/1.0.0"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/${exchangeProperty[microServicePolicy].getModelType()}/versions/1.0.0/policies/${exchangeProperty[microServicePolicy].getName()}/versions/1.0.0?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&deleteWithBody=false&mapHttpMessageBody=false&mapHttpMessageFormUrlEncodedBody=false&authUsername={{clamp.config.policy.api.userName}}&authPassword={{clamp.config.policy.api.password}}" />
-
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[microServicePolicy].getName()} removal
- status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="create-operational-policy">
- <from uri="direct:create-operational-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Creating Operational Policy: ${exchangeProperty[operationalPolicy].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Create Operational Policy')" />
- <setBody>
- <simple>${exchangeProperty[operationalPolicy].createPolicyPayload()}
- </simple>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>POST</constant>
- </setHeader>
- <setHeader headerName="Content-Type">
- <constant>application/json</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to create operational policy: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Operational/versions/1.0.0/policies"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Operational/versions/1.0.0/policies?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authUsername={{clamp.config.policy.api.userName}}&authPassword={{clamp.config.policy.api.password}}" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[operationalPolicy].getName()} creation
- status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="delete-operational-policy">
- <from uri="direct:delete-operational-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Deleting Operational Policy: ${exchangeProperty[operationalPolicy].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Delete Operational Policy')" />
- <setBody>
- <constant>null</constant>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>DELETE</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to delete operational policy: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Operational/versions/1.0.0/policies/${exchangeProperty[operationalPolicy].getName()}/versions/1"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Operational/versions/1.0.0/policies/${exchangeProperty[operationalPolicy].getName()}/versions/1?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&deleteWithBody=false&mapHttpMessageBody=false&mapHttpMessageFormUrlEncodedBody=false&authUsername={{clamp.config.policy.api.userName}}&authPassword={{clamp.config.policy.api.password}}" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[operationalPolicy].getName()} removal
- status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="create-guard-policy">
- <from uri="direct:create-guard-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Creating Guard Policy: ${exchangeProperty[guardPolicy].getKey()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Create Guard Policy')" />
- <setBody>
- <simple>${exchangeProperty[guardPolicy].getValue()}
- </simple>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>POST</constant>
- </setHeader>
- <setHeader headerName="Content-Type">
- <constant>application/json</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to create guard policy: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Guard/versions/1.0.0/policies"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Guard/versions/1.0.0/policies?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authUsername={{clamp.config.policy.api.userName}}&authPassword={{clamp.config.policy.api.password}}" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[guardPolicy].getKey()} creation status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="delete-guard-policy">
- <from uri="direct:delete-guard-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Deleting Guard Policy: ${exchangeProperty[guardPolicy].getKey()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Delete Guard Policy')" />
- <setBody>
- <constant>null</constant>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>DELETE</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to delete guard policy: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Guard/versions/1.0.0/policies/${exchangeProperty[guardPolicy].getKey()}/versions/1"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Guard/versions/1.0.0/policies/${exchangeProperty[guardPolicy].getKey()}/versions/1?bridgeEndpoint=true&useSystemProperties=true&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&deleteWithBody=false&mapHttpMessageBody=false&mapHttpMessageFormUrlEncodedBody=false&authUsername={{clamp.config.policy.api.userName}}&authPassword={{clamp.config.policy.api.password}}" />
-
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[guardPolicy].getKey()} removal status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="add-all-to-active-pdp-group">
- <from uri="direct:add-all-to-active-pdp-group" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Adding loop policies to PDP Group: ${exchangeProperty[loopObject].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Add policies to PDP group')" />
- <setBody>
- <simple>${exchangeProperty[loopObject].createPoliciesPayloadPdpGroup()}
- </simple>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>POST</constant>
- </setHeader>
- <setHeader headerName="Content-Type">
- <constant>application/json</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to add policies to PDP Group: {{clamp.config.policy.pap.url}}/policy/pap/v1/pdps/policies"></log>
- <toD
- uri="{{clamp.config.policy.pap.url}}/policy/pap/v1/pdps/policies?bridgeEndpoint=true&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&useSystemProperties=true&authUsername={{clamp.config.policy.pap.userName}}&authPassword={{clamp.config.policy.pap.password}}" />
-
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>PDP Group push ALL status</simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="remove-all-policy-from-active-pdp-group">
- <from uri="direct:remove-all-policy-from-active-pdp-group" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Removing policies from active PDP group for loop: ${exchangeProperty[loopObject].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Removing policies PDP group')" />
- <split>
- <simple>${exchangeProperty[loopObject].listPolicyNamesPdpGroup()}
- </simple>
- <setProperty propertyName="policyName">
- <simple>${body}</simple>
- </setProperty>
- <setBody>
- <constant>null</constant>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>DELETE</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to delete policy from PDP Group: {{clamp.config.policy.pap.url}}/pdps/policies/${exchangeProperty[policyName]}/versions/1.0.0"></log>
- <toD
- uri="{{clamp.config.policy.pap.url}}/policy/pap/v1/pdps/policies/${exchangeProperty[policyName]}/versions/1.0.0?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authUsername={{clamp.config.policy.pap.userName}}&authPassword={{clamp.config.policy.pap.password}}" />
- <setProperty propertyName="logMessage">
- <simple>${exchangeProperty[policyName]} PDP Group removal status
- </simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </split>
- <doCatch>
- <exception>java.lang.Exception</exception>
- <handled>
- <constant>false</constant>
- </handled>
- <setProperty propertyName="logMessage">
- <simple>PDP Group removal, Error reported: ${exception}</simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doCatch>
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- </doFinally>
- </doTry>
- </route>
- <route id="deploy-loop">
- <from uri="direct:deploy-loop" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Deploying the loop: ${exchangeProperty[loopObject].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('DCAE', 'Deploying the loop')" />
- <setBody>
- <method ref="org.onap.clamp.loop.LoopOperation"
- method="getDeployPayload(${exchangeProperty[loopObject]})" />
- </setBody>
- <setProperty propertyName="deploymentId">
- <method ref="org.onap.clamp.loop.LoopOperation"
- method="getDeploymentId(${exchangeProperty[loopObject]})" />
- </setProperty>
- <setHeader headerName="CamelHttpMethod">
- <constant>PUT</constant>
- </setHeader>
- <setHeader headerName="Content-Type">
- <constant>application/json</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to deploy loop: {{clamp.config.dcae.deployment.url}}/dcae-deployments/${exchangeProperty[deploymentId]}"></log>
- <toD
- uri="{{clamp.config.dcae.deployment.url}}/dcae-deployments/${exchangeProperty[deploymentId]}?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authUsername={{clamp.config.dcae.deployment.userName}}&authPassword={{clamp.config.dcae.deployment.password}}" />
- <to
- uri="bean:org.onap.clamp.loop.LoopOperation?method=updateLoopInfo(*,${exchangeProperty[loopObject]},${exchangeProperty[deploymentId]})" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>DEPLOY loop status (id:${exchangeProperty[deploymentId]})</simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
-
- <route id="undeploy-loop">
- <from uri="direct:undeploy-loop" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Undeploying the loop: ${exchangeProperty[loopObject].getName()} : ${exchangeProperty[loopObject].getDcaeDeploymentId()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('DCAE', 'Undeploying the loop')" />
-
- <setBody>
- <simple>{\"serviceTypeId\": \"${exchangeProperty[loopObject].getDcaeBlueprintId()}\"}
- </simple>
- </setBody>
- <setHeader headerName="CamelHttpMethod">
- <constant>DELETE</constant>
- </setHeader>
- <setHeader headerName="Content-Type">
- <constant>application/json</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to undeploy loop: {{clamp.config.dcae.deployment.url}}/dcae-deployments/${exchangeProperty[loopObject].getDcaeDeploymentId()}"></log>
- <toD
- uri="{{clamp.config.dcae.deployment.url}}/dcae-deployments/${exchangeProperty[loopObject].getDcaeDeploymentId()}?bridgeEndpoint=true&useSystemProperties=true&mapHttpMessageHeaders=false&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authUsername={{clamp.config.dcae.deployment.userName}}&authPassword={{clamp.config.dcae.deployment.password}}" />
- <to
- uri="bean:org.onap.clamp.loop.LoopOperation?method=updateLoopInfo(*,${exchangeProperty[loopObject]},null)" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>UNDEPLOY loop status</simple>
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
- <route id="get-status-from-policy">
- <from uri="direct:get-status-from-policy" />
- <doTry>
- <log
- loggingLevel="INFO"
- message="Query Closed Loop status from policy PDP: ${exchangeProperty[loopObject].getName()}" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeLog('Policy', 'Query operational policies to PDP group')" />
- <setProperty propertyName="operationalPolicyName">
- <method ref="org.onap.clamp.loop.LoopOperation"
- method="getOperationalPolicyName(${exchangeProperty[loopObject]})" />
- </setProperty>
- <setHeader headerName="CamelHttpMethod">
- <constant>GET</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to query from Policy PDP: {{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Operational/versions/1.0.0/policies/${exchangeProperty[operationalPolicyName]}/versions/deployed"></log>
- <toD
- uri="{{clamp.config.policy.api.url}}/policy/api/v1/policytypes/onap.policies.controlloop.Operational/versions/1.0.0/policies/${exchangeProperty[operationalPolicyName]}/versions/deployed?bridgeEndpoint=true&useSystemProperties=true&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authMethod=Basic&authUsername={{clamp.config.policy.pap.userName}}&authPassword={{clamp.config.policy.pap.password}}" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>Policy deployment status</simple>
- </setProperty>
- <setProperty propertyName="policyStatus">
- <method ref="org.onap.clamp.loop.LoopOperation"
- method="analysePolicyResponse(${header.CamelHttpResponseCode})" />
- </setProperty>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </route>
- <route id="get-status-from-dcae">
- <from uri="direct:get-status-from-dcae" />
- <log
- loggingLevel="INFO"
- message="Query Closed Loop status from DCAE ${exchangeProperty[loopObject].getName()}" />
- <choice>
- <when>
- <simple>${exchangeProperty[loopObject].getDcaeDeploymentStatusUrl()} == null
- </simple>
- <setProperty propertyName="dcaeStatus">
- <method ref="org.onap.clamp.loop.LoopOperation"
- method="analyseDcaeResponse(*,null)" />
- </setProperty>
- <log
- loggingLevel="INFO"
- message="dcae status: ${exchangeProperty[dcaeStatus]}"></log>
- </when>
- <otherwise>
- <doTry>
- <log
- loggingLevel="INFO"
- message="Query Closed Loop status from Dcae" />
- <setHeader headerName="CamelHttpMethod">
- <constant>GET</constant>
- </setHeader>
- <setHeader headerName="X-ONAP-RequestID">
- <simple>${exchangeProperty[X-ONAP-RequestID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-InvocationID">
- <simple>${exchangeProperty[X-ONAP-InvocationID]}
- </simple>
- </setHeader>
- <setHeader headerName="X-ONAP-PartnerName">
- <simple>${exchangeProperty[X-ONAP-PartnerName]}
- </simple>
- </setHeader>
- <log
- loggingLevel="INFO"
- message="Endpoint to query Closed Loop status: ${exchangeProperty[loopObject].getDcaeDeploymentStatusUrl()}"></log>
- <toD
- uri="${exchangeProperty[loopObject].getDcaeDeploymentStatusUrl()}?bridgeEndpoint=true&useSystemProperties=true&throwExceptionOnFailure=${exchangeProperty[raiseHttpExceptionFlag]}&httpClient.connectTimeout=20000&httpClient.socketTimeout=20000&authMethod=Basic&authUsername={{clamp.config.dcae.deployment.userName}}&authPassword={{clamp.config.dcae.deployment.password}}" />
- <doFinally>
- <to uri="direct:reset-raise-http-exception-flag" />
- <to
- uri="bean:org.onap.clamp.flow.log.FlowLogOperation?method=invokeReturnLog()" />
- <setProperty propertyName="logMessage">
- <simple>DCAE deployment status</simple>
- </setProperty>
- <setProperty propertyName="dcaeStatus">
- <method ref="org.onap.clamp.loop.LoopOperation"
- method="analyseDcaeResponse(*,${header.CamelHttpResponseCode})" />
- </setProperty>
- <log
- loggingLevel="INFO"
- message="dcae status: ${exchangeProperty[dcaeStatus]}"></log>
- <to uri="direct:dump-loop-log-http-response" />
- </doFinally>
- </doTry>
- </otherwise>
- </choice>
- </route>
- <route id="reset-raise-http-exception-flag">
- <from uri="direct:reset-raise-http-exception-flag" />
- <setProperty propertyName="raiseHttpExceptionFlag">
- <simple resultType="java.lang.Boolean">true</simple>
- </setProperty>
- </route>
-
- <route id="dump-loop-log-http-response">
- <from uri="direct:dump-loop-log-http-response" />
- <log loggingLevel="INFO" message="${exchangeProperty[logMessage]} - ${header.CamelHttpResponseCode} : ${header.CamelHttpResponseText}" />
- <to
- uri="bean:org.onap.clamp.loop.log.LoopLogService?method=addLog('${exchangeProperty[logMessage]} - ${header.CamelHttpResponseCode} : ${header.CamelHttpResponseText}','INFO',${exchangeProperty[loopObject]})" />
- </route>
</routes>
\ No newline at end of file
Code Review / clamp.git / blobdiff