# ============LICENSE_START=======================================================
# ONAP CLAMP
# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
+# Copyright (C) 2017-2019 AT&T Intellectual Property. All rights
# reserved.
# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
+# Modifications copyright (c) 2019 Nokia
+# ================================================================================\
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
-#
+#
# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END============================================
# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
###
-info.build.artifact=@project.artifactId@
-info.build.name=@project.name@
-info.build.description=@project.description@
-info.build.version=@project.version@
-
-
-server.contextPath=/
+### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
+### (See below for the parameter 'server.http.port' if you want to have both enabled)
+### To have only HTTP, keep the lines server.ssl.* commented
+### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
+### server.port=8080
+### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
+#server.ssl.key-store=file:/tmp/mykey.jks
+#server.ssl.key-store-password=pass
+#server.ssl.key-password=pass
+
+### In order to be user friendly when HTTPS is enabled,
+### you can add another HTTP port that will be automatically redirected to HTTPS
+### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
+#server.http-to-https-redirection.port=8090
+
+### HTTP Example:
+###--------------
+### server.port=8080
+
+### HTTPS Example:
+### --------------
+### server.port=8443
+### server.ssl.key-store=file:/tmp/mykey.jks
+### server.ssl.key-store-password=mypass
+### server.ssl.key-password=mypass
+
+### HTTP (Redirected to HTTPS) and HTTPS Example:
+### --------------------------------------------
+server.port=8443
+## Config part for Server certificates
+# Can be a classpath parameter instead of file:/
+server.ssl.key-store=classpath:/clds/aaf/org.onap.clamp.p12
+server.ssl.key-store-password=enc:WWCxchk4WGBNSvuzLq3MLjMs5ObRybJtts5AI0XD1Vc
+server.ssl.key-password=enc:WWCxchk4WGBNSvuzLq3MLjMs5ObRybJtts5AI0XD1Vc
+server.ssl.key-store-type=PKCS12
+server.ssl.key-alias=clamp@clamp.onap.org
+
+# The key file used to decode the key store and trust store password
+# If not defined, the key store and trust store password will not be decrypted
+clamp.config.keyFile=classpath:/clds/aaf/org.onap.clamp.keyfile
+
+## Config part for Client certificates
+server.ssl.client-auth=want
+server.ssl.trust-store=classpath:/clds/aaf/truststoreONAPall.jks
+server.ssl.trust-store-password=enc:iDnPBBLq_EMidXlMa1FEuBR8TZzYxrCg66vq_XfLHdJ
+
+#server.http-to-https-redirection.port=8080
+
+server.servlet.context-path=/
#Modified engine-rest applicationpath
-spring.jersey.application-path=/engine-rest
-spring.profiles.active=clamp-default
-spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+spring.profiles.active=clamp-default,clamp-aaf-authentication,clamp-sdc-controller,clamp-ssl-config,clamp-policy-controller,legacy-operational-policy,default-dictionary-elements
+spring.http.converters.preferred-json-mapper=gson
#The max number of active threads in this pool
server.tomcat.max-threads=200
#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
server.tomcat.max-idle-time=60000
-
-#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
-#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
-#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
-
#Servlet context parameters
server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
camel.defaultthreadpool.maxqueuesize=1000
camel.defaultthreadpool.keepaliveTime=60
camel.defaultthreadpool.rejectpolicy=CallerRuns
-
-kubernetes.namespace=com-att-ajsc
-
-#server.port=0
-
-#Camunda Process Engine DataSource connection Details
-spring.datasource.url=jdbc:mysql://localhost:${docker.mariadb.port.host}/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true
-spring.datasource.username=camunda
-spring.datasource.password=ndMSpw4CAM
-spring.datasource.driver-class-name=com.mysql.jdbc.Driver
-
-#Camunda application properties
-#Camunda history level
-camunda.bpm.history-level=auto
+#camel.springboot.xmlRoutes = false
+camel.springboot.xmlRoutes=classpath:/clds/camel/routes/*.xml
+camel.springboot.xmlRests=classpath:/clds/camel/rest/*.xml
+#camel.springboot.typeConversion = false
#clds datasource connection details
-spring.cldsdatasource.driver-class-name=com.mysql.jdbc.Driver
-spring.cldsdatasource.url=jdbc:mysql://localhost:${docker.mariadb.port.host}/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true
-spring.cldsdatasource.username=clds
-spring.cldsdatasource.password=sidnnd83K
-spring.cldsdatasource.poolinitialsize=1
-spring.cldsdatasource.poolmaxactive=5
-spring.cldsdatasource.poolmaxwait=5000
-spring.cldsdatasource.pooltestonborrow=true
-spring.cldsdatasource.poolvalidationquery=SELECT 1
-spring.cldsdatasource.poolvalidationquerytimeout=5000
+spring.datasource.cldsdb.driverClassName=org.mariadb.jdbc.Driver
+spring.datasource.cldsdb.url=jdbc:mariadb:sequential://localhost:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
+spring.datasource.cldsdb.username=clds
+spring.datasource.cldsdb.password=4c90a0b48204383f4283448d23e0b885a47237b2a23588e7c4651604f51c1067
+spring.datasource.cldsdb.validationQuery=SELECT 1
+spring.datasource.cldsdb.validationQueryTimeout=20000
+spring.datasource.cldsdb.validationInterval=30000
+spring.datasource.cldsdb.testWhileIdle = true
+spring.datasource.cldsdb.minIdle = 0
+spring.datasource.cldsdb.initialSize=0
+# Automatically test whether a connection provided is good or not
+spring.datasource.cldsdb.testOnBorrow=true
+spring.datasource.cldsdb.ignoreExceptionOnPreLoad=true
+
+spring.jpa.properties.javax.persistence.schema-generation.database.action=none
+#spring.jpa.properties.javax.persistence.schema-generation.create-source=metadata
+#spring.jpa.properties.javax.persistence.schema-generation.scripts.action=create
+#spring.jpa.properties.javax.persistence.schema-generation.scripts.create-target=create.sql
+# disable Hibernate DDL generation because the schema will be generated from a sql script
+spring.jpa.properties.hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect
+spring.jpa.properties.hibernate.ddl-auto=validate
+spring.jpa.properties.hibernate.hbm2ddl.delimiter=;
+spring.jpa.properties.hibernate.format_sql=true
+spring.jpa.properties.hibernate.use-new-id-generator-mappings=true
+
+# Whether to enable logging of SQL statements.
+#spring.jpa.show-sql=true
#Async Executor default Parameters
async.core.pool.size=10
async.max.pool.size=20
async.queue.capacity=500
-#CSI Logging Queue
-JMS_WMQ_PROVIDER_URL=aftdsc://AFTUAT/34.07/-84.28
-JMS_WMQ_CONNECTION_FACTORY_NAME=aftdsc://AFTUAT/?service=CSILOG,version=4.0,bindingType=fusionBus,envContext=Q,Q30A=YES
-JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=com.att.aft.jms.FusionCtxFactory
-JMS_WMQ_AUDIT_DESTINATION_NAME=queue:///CSILOGQL.M2E.DASHBOARD01.NOT.Q30A
-JMS_WMQ_PERF_DESTINATION_NAME=queue:///CSILOGQL.M2E.PERFORMANCE01.NOT.Q30A
-csiEnable=true
-
-#GRM Edge endpoint details
-service.name=ajsc6camundademo
-service.version=1.0.0.0
-routeoffer=TEST
-#Update with your application name
-application.name=AJSC6CAMUNDA
-
-org.onap.clamp.config.files.cldsReference=classpath:/clds/clds-reference.properties
-org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
-org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.properties
+#For EELF logback file
+#clamp.config.logback.path=
+clamp.config.logback.filename=logback-default.xml
+#The log folder that will be used in logback.xml file
+clamp.config.log.path=/var/log/onap/clamp
+clamp.config.files.systemProperties=classpath:/system.properties
+clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
+clamp.config.files.globalProperties=classpath:/clds/templates/globalProperties.json
+clamp.config.files.sdcController=classpath:/clds/sdc-controllers-config.json
+
+#
+# Configuration Settings for Policy Engine Components
+clamp.config.policy.api.url=http4://policy.api.simpledemo.onap.org:6969
+clamp.config.policy.api.userName=healthcheck
+clamp.config.policy.api.password=zb!XztG34
+clamp.config.policy.pap.url=http4://policy.api.simpledemo.onap.org:6969
+clamp.config.policy.pap.userName=healthcheck
+clamp.config.policy.pap.password=zb!XztG34
+
+#
+# Sdc service properties
+clamp.config.sdc.csarFolder=/tmp/sdc-controllers
+
+#DCAE Inventory Url Properties
+clamp.config.dcae.inventory.url=http4://dcae.api.simpledemo.onap.org:8080
+clamp.config.dcae.intentory.retry.interval=10000
+clamp.config.dcae.intentory.retry.limit=5
+
+#DCAE Deployment Url Properties
+clamp.config.dcae.deployment.url=http4://dcae.api.simpledemo.onap.org:8188
+clamp.config.dcae.deployment.userName=test
+clamp.config.dcae.deployment.password=test
+
+#Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
+clamp.config.security.permission.type.cl=org.onap.clamp.clds.cl
+clamp.config.security.permission.type.cl.manage=org.onap.clamp.clds.cl.manage
+clamp.config.security.permission.type.cl.event=org.onap.clamp.clds.cl.event
+clamp.config.security.permission.type.filter.vf=org.onap.clamp.clds.filter.vf
+clamp.config.security.permission.type.template=org.onap.clamp.clds.template
+clamp.config.security.permission.type.tosca=org.onap.clamp.clds.tosca
+#This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
+clamp.config.security.permission.instance=dev
+clamp.config.security.authentication.class=org.onap.aaf.cadi.principal.X509Principal
+
+#AAF related parameters
+clamp.config.cadi.cadiLoglevel=DEBUG
+clamp.config.cadi.cadiLatitude=10
+clamp.config.cadi.cadiLongitude=10
+clamp.config.cadi.aafLocateUrl=https://aaf-locate:8095
+clamp.config.cadi.oauthTokenUrl= https://AAF_LOCATE_URL/locate/onap.org.osaaf.aaf.token:2.1/token
+clamp.config.cadi.oauthIntrospectUrll=https://AAF_LOCATE_URL/locate/onap.org.osaaf.aaf.introspect:2.1/introspect
+clamp.config.cadi.aafEnv=DEV
+clamp.config.cadi.aafUrl=https://AAF_LOCATE_URL/onap.org.osaaf.aaf.service:2.1
+clamp.config.cadi.cadiX509Issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US
+
+## Tosca converter
+clamp.config.tosca.converter.json.schema.templates=classpath:/clds/tosca-converter/templates.json
+clamp.config.tosca.converter.default.datatypes=classpath:/clds/tosca-converter/default-tosca-types.yaml
+clamp.config.tosca.converter.dictionary.support.enabled=true
+
+# Configuration settings for CDS
+clamp.config.cds.url=http4://blueprints-processor-http:8080
+clamp.config.cds.userName=ccsdkapps
+clamp.config.cds.password=ccsdkapps
\ No newline at end of file
Code Review / clamp.git / blobdiff