+++ /dev/null
-/**
- * ============LICENSE_START=======================================================
- * org.onap.aai
- * ================================================================================
- * Copyright © 2017 AT&T Intellectual Property. All rights reserved.
- * Copyright © 2017 Amdocs
- * ================================================================================
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- * ============LICENSE_END=========================================================
- *
- * ECOMP is a trademark and service mark of AT&T Intellectual Property.
- */
-package org.openecomp.sa.searchdbabstraction.searchapi;
-
-import com.fasterxml.jackson.annotation.JsonProperty;
-
-/**
- * This class represents a simple range query.
- *
- * <p>A range query is composed of one or more operator/value pairs which define
- * the upper and lower bounds of the range, and a field to apply the query to.
- *
- * <p>Operators may be one of the following:
- * <ul>
- * <li>gt - Greater than. </li>
- * <li>gte - Greater than or equal to. </li>
- * <li>lt - Less than. </li>
- * <li>lte - Less than or equal to. </li>
- * </ul>
- * Values may be either numeric values (Integer or Double) or Strings representing
- * dates.
- *
- * <p>The following examples illustrate a couple of variants of the range query:
- *
- * <p><pre>
- * // A simple numeric range query:
- * {
- * "range": {
- * "field": "fieldname",
- * "gte": 5,
- * "lte": 10
- * }
- * }
- *
- * // A simple date range query:
- * {
- * "range": {
- * "field": "fieldname",
- * "gt": "2016-10-06T00:00:00.558+03:00",
- * "lt": "2016-10-06T23:59:59.558+03:00"
- * }
- * }
- * </pre>
- */
-public class RangeQuery {
-
- /**
- * The name of the field to apply the range query against.
- */
- private String field;
-
- /**
- * The value of the field must be greater than this value to be a match.<br>
- * NOTE: Only one of 'gt' or 'gte' should be set on any single {@link RangeQuery}
- * instance.
- */
- private Object gt;
-
- /**
- * The value of the field must be greater than or equal to this value to be a match.<br>
- * NOTE: Only one of 'gt' or 'gte' should be set on any single {@link RangeQuery}
- * instance.
- */
- private Object gte;
-
- /**
- * The value of the field must be less than this value to be a match.<br>
- * NOTE: Only one of 'lt' or 'lte' should be set on any single {@link RangeQuery}
- * instance.
- */
- private Object lt;
-
- /**
- * The value of the field must be less than or equal to than this value to be a match.<br>
- * NOTE: Only one of 'lt' or 'lte' should be set on any single {@link RangeQuery}
- * instance.
- */
- private Object lte;
-
- private String format;
-
- @JsonProperty("time-zone")
- private String timeZone;
-
- public String getField() {
- return field;
- }
-
- public void setField(String field) {
- this.field = field;
- }
-
- public Object getGt() {
- return gt;
- }
-
- public void setGt(Object gt) {
-
- // It does not make sense to assign a value to both the 'greater than'
- // and 'greater than or equal' operations, so make sure we are not
- // trying to do that.
- if (gte == null) {
-
- // Make sure that we are not trying to mix both numeric and date
- // type values in the same queries.
- if (((lt != null) && !typesMatch(gt, lt))
- || ((lte != null) && !typesMatch(gt, lte))) {
- throw new IllegalArgumentException("Cannot mix date and numeric values in the same ranged query");
- }
-
- // If we made it here, then we're all good. Store the value.
- this.gt = gt;
- } else {
- throw new IllegalArgumentException("Cannot assign both 'gt' and 'gte' fields in the same ranged query");
- }
- }
-
-
- public Object getGte() {
- return gte;
- }
-
- public void setGte(Object gte) {
-
- // It does not make sense to assign a value to both the 'greater than'
- // and 'greater than or equal' operations, so make sure we are not
- // trying to do that.
- if (gt == null) {
-
- // Make sure that we are not trying to mix both numeric and date
- // type values in the same queries.
- if (((lt != null) && !typesMatch(gte, lt))
- || ((lte != null) && !typesMatch(gte, lte))) {
- throw new IllegalArgumentException("Cannot mix date and numeric values in the same ranged query");
- }
-
- // If we made it here, then we're all good. Store the value.
- this.gte = gte;
-
- } else {
- throw new IllegalArgumentException("Cannot assign both 'gt' and 'gte' fields in the same ranged query");
- }
- }
-
- public Object getLt() {
- return lt;
- }
-
- public void setLt(Object lt) {
-
- // It does not make sense to assign a value to both the 'less than'
- // and 'less than or equal' operations, so make sure we are not
- // trying to do that.
- if (lte == null) {
-
- // Make sure that we are not trying to mix both numeric and date
- // type values in the same queries.
- if (((gt != null) && !typesMatch(lt, gt))
- || ((gte != null) && !typesMatch(lt, gte))) {
- throw new IllegalArgumentException("Cannot mix date and numeric values in the same ranged query");
- }
-
- // If we made it here, then we're all good. Store the value.
-
- this.lt = lt;
- } else {
- throw new IllegalArgumentException("Cannot assign both 'lt' and 'lte' fields in the same ranged query");
- }
- }
-
- public Object getLte() {
- return lte;
- }
-
- public void setLte(Object lte) {
-
- // It does not make sense to assign a value to both the 'greater than'
- // and 'greater than or equal' operations, so make sure we are not
- // trying to do that.
- if (lt == null) {
-
- // Make sure that we are not trying to mix both numeric and date
- // type values in the same queries.
- if (((gt != null) && !typesMatch(lte, gt))
- || ((gte != null) && !typesMatch(lte, gte))) {
- throw new IllegalArgumentException("Cannot mix date and numeric values in the same ranged query");
- }
-
- // If we made it here, then we're all good. Store the value.
-
- this.lte = lte;
- } else {
- throw new IllegalArgumentException("Cannot assign both 'lt' and 'lte' fields in the same ranged query");
- }
- }
-
- public String getFormat() {
- return format;
- }
-
- public void setFormat(String format) {
- this.format = format;
- }
-
- public String getTimeZone() {
- return timeZone;
- }
-
- public void setTimeZone(String timeZone) {
- this.timeZone = timeZone;
- }
-
- /**
- * This convenience method determines whether or not the supplied
- * value needs to be enclosed in '"' characters when generating
- * ElasticSearch compatible syntax.
- *
- * @param val - The value to check.
- * @return - A string representation of the value for inclusion
- * in an ElasticSearch syntax string.
- */
- private String formatStringOrNumericVal(Object val) {
-
- if (val instanceof String) {
- return "\"" + val.toString() + "\"";
- } else {
- return val.toString();
- }
- }
-
-
- /**
- * This convenience method verifies that the supplied objects are
- * of classes considered to be compatible for a ranged query.
- *
- * @param value1 - The first value to check.
- * @param value2 - The second value to check.
- * @return - True if the two objects are compatible for inclusion in the
- * same ranged query, False, otherwise.
- */
- boolean typesMatch(Object value1, Object value2) {
-
- return ((value1 instanceof String) && (value2 instanceof String))
- || (!(value1 instanceof String) && !(value2 instanceof String));
- }
-
-
- /**
- * This method returns a string which represents this query in syntax
- * that is understandable by ElasticSearch and is suitable for inclusion
- * in an ElasticSearch query string.
- *
- * @return - ElasticSearch syntax string.
- */
- public String toElasticSearch() {
-
- StringBuilder sb = new StringBuilder();
-
- sb.append("{");
- sb.append("\"range\": {");
- sb.append("\"").append(field).append("\": {");
-
- // We may have one or zero of 'greater than' or 'greater
- // than or equal'
- boolean needComma = false;
- if (gte != null) {
- sb.append("\"gte\": ").append(formatStringOrNumericVal(gte));
- needComma = true;
- } else if (gt != null) {
- sb.append("\"gt\": ").append(formatStringOrNumericVal(gt));
- needComma = true;
- }
-
- // We may have one or zero of 'less than' or 'less
- // than or equal'
- if (lte != null) {
- if (needComma) {
- sb.append(", ");
- }
- sb.append("\"lte\": ").append(formatStringOrNumericVal(lte));
- } else if (lt != null) {
- if (needComma) {
- sb.append(", ");
- }
- sb.append("\"lt\": ").append(formatStringOrNumericVal(lt));
- }
-
- // Append the format specifier if one was provided.
- if (format != null) {
- sb.append(", \"format\": \"").append(format).append("\"");
- }
-
- // Append the time zone specifier if one was provided.
- if (timeZone != null) {
- sb.append(", \"time_zone\": \"").append(timeZone).append("\"");
- }
-
- sb.append("}");
- sb.append("}");
- sb.append("}");
-
- return sb.toString();
- }
-
- @Override
- public String toString() {
-
- String str = "{ field: " + field + ", ";
-
- if (gt != null) {
- str += "gt: " + gt;
- } else if (gte != null) {
- str += "gte: " + gte;
- }
-
- if (lt != null) {
- str += (((gt != null) || (gte != null)) ? ", " : "") + "lt: " + lt;
- } else if (lte != null) {
- str += (((gt != null) || (gte != null)) ? ", " : "") + "lte: " + lte;
- }
-
- str += "}";
-
- return str;
- }
-}
Code Review / aai / search-data-service.git / blobdiff