function usage {
- echo "usage: docker_run.sh [ -r|--release <RELEASE-NAME> ] [ -e|--environment <ENV-NAME> ] [ -p|--port <Docker-hub-port>] [ -l|--local <Run-without-pull>] [ -h|--help ]"
+ echo "usage: docker_run.sh [ -r|--release <RELEASE-NAME> ] [ -e|--environment <ENV-NAME> ] [ -p|--port <Docker-hub-port>] [ -l|--local <Run-without-pull>] [ -s|--skipTests <Run-without-sanityDocker>] [ -h|--help ]"
}
function dir_perms {
- mkdir -p /data/logs/BE/ASDC/ASDC-BE
- mkdir -p /data/logs/FE/ASDC/ASDC-FE
+ mkdir -p /data/logs/BE/SDC/SDC-BE
+ mkdir -p /data/logs/FE/SDC/SDC-FE
chmod -R 777 /data/logs
}
+function monitor_docker {
+
+echo monitor $1 Docker
+sleep 5
+TIME_OUT=900
+INTERVAL=20
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+
+MATCH=`docker logs --tail 30 $1 | grep "DOCKER STARTED"`
+echo MATCH is -- $MATCH
+
+if [ -n "$MATCH" ]
+ then
+ echo DOCKER start finished in $TIME seconds
+ break
+ fi
+
+ echo Sleep: $INTERVAL seconds before testing if $1 DOCKER is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+ sleep $INTERVAL
+ TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]
+ then
+ echo -e "\e[1;31mTIME OUT: DOCKER was NOT fully started in $TIME_OUT seconds... Could cause problems ...\e[0m"
+fi
+
+
+}
+
RELEASE=latest
LOCAL=false
+SKIPTESTS=false
+DEBUG_PORT="--publish 4000:4000"
+
[ -f /opt/config/env_name.txt ] && DEP_ENV=$(cat /opt/config/env_name.txt) || DEP_ENV=__ENV-NAME__
[ -f /opt/config/nexus_username.txt ] && NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt) || NEXUS_USERNAME=release
[ -f /opt/config/nexus_password.txt ] && NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt) || NEXUS_PASSWD=sfWU3DFVdBr7GVxB85mTYgAW
shift
LOCAL=true
;;
+ -s | --skipTests )
+ shift
+ SKIPTESTS=true
+ ;;
-h | --help )
usage
exit
;;
- * )
+ * )
usage
exit 1
esac
if [ ${LOCAL} = false ]; then
docker pull ${PREFIX}/sdc-cassandra:${RELEASE}
fi
-docker run --detach --name sdc-cs --env RELEASE="${RELEASE}" --env ENVNAME="${DEP_ENV}" --env HOST_IP=${IP} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/CS:/var/lib/cassandra --volume /data/environments:/root/chef-solo/environments --publish 9042:9042 --publish 9160:9160 openecomp/sdc-cassandra:${RELEASE}
+docker run --detach --name sdc-cs --env RELEASE="${RELEASE}" --env ENVNAME="${DEP_ENV}" --env HOST_IP=${IP} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/CS:/var/lib/cassandra --volume /data/environments:/root/chef-solo/environments --publish 9042:9042 --publish 9160:9160 ${PREFIX}/sdc-cassandra:${RELEASE}
echo "please wait while CS is starting..."
-echo ""
-c=120 # seconds to wait
-REWRITE="\e[25D\e[1A\e[K"
-while [ $c -gt 0 ]; do
- c=$((c-1))
- sleep 1
- echo -e "${REWRITE}$c"
-done
-echo -e ""
+monitor_docker sdc-cs
+#echo ""
+#c=120 # seconds to wait
+#REWRITE="\e[25D\e[1A\e[K"
+#while [ $c -gt 0 ]; do
+# c=$((c-1))
+# sleep 1
+# echo -e "${REWRITE}$c"
+#done
+#echo -e "
# kibana
echo "docker run sdc-kibana..."
echo "docker run sdc-backend..."
if [ ${LOCAL} = false ]; then
docker pull ${PREFIX}/sdc-backend:${RELEASE}
+else
+ ADDITIONAL_ARGUMENTS=${DEBUG_PORT}
fi
-docker run --detach --name sdc-BE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 4g --memory-swap=4g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/logs/BE/:/var/lib/jetty/logs --volume /data/environments:/root/chef-solo/environments --publish 8443:8443 --publish 8080:8080 ${PREFIX}/sdc-backend:${RELEASE}
+docker run --detach --name sdc-BE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 4g --memory-swap=4g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/logs/BE/:/var/lib/jetty/logs --volume /data/environments:/root/chef-solo/environments --publish 8443:8443 --publish 8080:8080 ${ADDITIONAL_ARGUMENTS} ${PREFIX}/sdc-backend:${RELEASE}
echo "please wait while BE is starting..."
-echo ""
-c=45 # seconds to wait
-REWRITE="\e[45D\e[1A\e[K"
-while [ $c -gt 0 ]; do
- c=$((c-1))
- sleep 1
- echo -e "${REWRITE}$c"
-done
-echo -e ""
+monitor_docker sdc-BE
+#echo ""
+#c=45 # seconds to wait
+#REWRITE="\e[45D\e[1A\e[K"
+#while [ $c -gt 0 ]; do
+# c=$((c-1))
+# sleep 1
+# echo -e "${REWRITE}$c"
+#done
+#echo -e ""
+
+
# Front-End
fi
docker run --detach --name sdc-FE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/logs/FE/:/var/lib/jetty/logs --volume /data/environments:/root/chef-solo/environments --publish 9443:9443 --publish 8181:8181 ${PREFIX}/sdc-frontend:${RELEASE}
+echo "docker run sdc-frontend..."
+monitor_docker sdc-FE
+
+
# running healthCheck scripts
echo "Running health checks, please wait..."
echo ""
-c=25 # seconds to wait
+c=30 # seconds to wait
REWRITE="\e[45D\e[1A\e[K"
while [ $c -gt 0 ]; do
c=$((c-1))
/data/scripts/docker_health.sh
-if [ $? -ne 0 ]; then
- exit 1
-fi
-
+#if [ $? -ne 0 ]; then
+# exit 1
+#fi
+
+# sanityDocker
+echo "docker run sdc-sanity..."
+if [ ${SKIPTESTS} = false ]; then
+echo "Triger sanity docker, please wait..."
+ if [ ${LOCAL} = false ]; then
+ docker pull ${PREFIX}/sdc-sanity:${RELEASE}
+ fi
+ docker run --detach --name sdc-sanity --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 1g --memory-swap=1g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/logs/sdc-sanity/target:/var/lib/tests/target --volume /data/logs/sdc-sanity/ExtentReport:/var/lib/tests/ExtentReport --volume /data/logs/sdc-sanity/outputCsar:/var/lib/tests/outputCsar --volume /data/environments:/root/chef-solo/environments --publish 9560:9560 ${PREFIX}/sdc-sanity:${RELEASE}
+fi
\ No newline at end of file
Code Review / sdc.git / blobdiff