--- /dev/null
+<!--
+ ============LICENSE_START=======================================================
+ openECOMP : SDN-C
+ ================================================================================
+ Copyright (C) 2017 AT&T Intellectual Property. All rights
+ reserved.
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+ http://www.apache.org/licenses/LICENSE-2.0
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ ============LICENSE_END=========================================================
+ -->
+
+<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
+ xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+ xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd" module='VNF-API' version='${project.version}'><method rpc="network-topology-changeassign" mode="sync"><block atomic="true"><get-resource plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network"
+ key="l3-network.network-id = $network-topology-operation-input.network-request-information.network-id"
+ local-only="false"
+ pfx="tmp.AnAI.l3network">
+<outcome value='failure'>
+<return status='failure'>
+ <parameter name="error-code" value="500" />
+ <parameter name="error-message" value="`'Error retrieving l3-network with network-id=' + $network-topology-operation-input.network-request-information.network-id + ' from AnAI'`" /></return></outcome><outcome value='not-found'>
+<return status='failure'>
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="`'network-id: ' + $network-topology-operation-input.network-request-information.network-id + 'not found in AnAI'`" /></return></outcome></get-resource><switch test="`$tmp.AnAI.l3network.network-name == $network-topology-operation-input.network-request-information.network-name`"><outcome value='false'>
+<return status='failure'>
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="`'The input network-name,' + network-topology-operation-input.network-request-information.network-name + ', does not match what is returned from AnAI with network-id = ' + $network-topology-operation-input.network-request-information.network-id`" /></return></outcome></switch><switch test="`$tmp.AnAI.l3network.network-type == $network-topology-operation-input.network-request-information.network-type`"><outcome value='false'>
+<return status='failure'>
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="`'The input network-type,' + network-topology-operation-input.network-request-information.network-type + ', does not match what is returned from AnAI with network-id = ' + $network-topology-operation-input.network-request-information.network-id`" /></return></outcome></switch><switch test="`$tmp.AnAI.l3network.network-name == $preload-data.network-topology-information.network-topology-identifier.network-name`"><outcome value='false'>
+<return status='failure'>
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="`'No preload network found with network-name = ' + $tmp.AnAI.l3network.network-name + ' in SDNC'`" /></return></outcome></switch><switch test="`$tmp.AnAI.l3network.network-type == $preload-data.network-topology-information.network-topology-identifier.network-type`"><outcome value='false'>
+<return status='failure'>
+ <parameter name="error-code" value="404" />
+ <parameter name="error-message" value="`'No preload network found with network-type = ' + $tmp.AnAI.l3network.network-type + ' in SDNC'`" /></return></outcome></switch><set>
+ <parameter name='x' value='0' />
+ <parameter name='tmp.error-message' value='' />
+ <parameter name='execute_failure' value='false' />
+ <parameter name='tmp.l3networkUpdate' value='0' /></set><switch test="`$tmp.AnAI.l3network.subnets.subnet_length`"><outcome value=''><set>
+<parameter name="tmp.AnAI.l3network.subnets.subnet_length" value="0" />
+</set></outcome></switch><for index="k" start="0" end="`$tmp.AnAI.l3network.subnets.subnet_length`">
+<block atomic='true'><set>
+<parameter name='tmp.start-address-match' value='0' />
+</set><set>
+<parameter name='tmp.subnetUpdate' value='0' />
+</set><block atomic='true'><for index="n" start="0" end="`$preload-data.network-topology-information.subnets_length`">
+<switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].network-start-address == $preload-data.network-topology-information.subnets[$n].start-address`"><outcome value='true'>
+<block atomic='true'><set>
+<parameter name='tmp.start-address-match' value='1' />
+</set><switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].cidr-mask == $preload-data.network-topology-information.subnets[$n].cidr-mask`"><outcome value='false'>
+<set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></outcome></switch><switch test="`$preload-data.network-topology-information.subnets[$n].gateway-address`"><outcome value=''><block>
+<execute plugin="org.openecomp.sdnc.sli.plugin.ipAddressTools.IpAddressTool" method="getGatewayAddress">
+ <parameter name="ipAddress" value="`$preload-data.network-topology-information.subnets[$n].start-address`" />
+ <parameter name="ipVersion" value="`$preload-data.network-topology-information.subnets[$n].ip-version`" />
+ <parameter name="subnet" value="`$preload-data.network-topology-information.subnets[$n].cidr-mask`" />
+ <parameter name="ctxVariable" value="tmp.return.generate.gateway-address" /></execute><switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].gateway-address == $tmp.return.generate.gateway-address`"><outcome value='false'>
+<block>
+<set>
+<parameter name="tmp.gateway-address" value="`$tmp.return.generate.gateway-address`" />
+</set><set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></block></outcome></switch></block></outcome><outcome value='Other'>
+<switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].gateway-address == $preload-data.network-topology-information.subnets[$n].gateway-address`"><outcome value='false'>
+<block>
+<set>
+<parameter name="tmp.gateway-address" value="`$preload-data.network-topology-information.subnets[$n].gateway-address`" />
+</set><set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></block></outcome><outcome value='true'>
+<set>
+<parameter name="tmp.gateway-address" value="`$preload-data.network-topology-information.subnets[$n].gateway-address`" />
+</set></outcome></switch></outcome></switch><switch test="`$preload-data.network-topology-information.subnets[$n].dhcp-enabled`"><outcome value='N'><set>
+<parameter name="tmp.dhcpEnabled.boolean" value="false" />
+</set></outcome><outcome value='Y'><set>
+<parameter name="tmp.dhcpEnabled.boolean" value="true" />
+</set></outcome></switch><switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].dhcp-enabled == $tmp.dhcpEnabled.boolean`"><outcome value='false'>
+<block>
+<set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></block></outcome></switch><switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].dhcp-start == $preload-data.network-topology-information.subnets[$n].dhcp-start-address`"><outcome value='false'>
+<block>
+<set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></block></outcome></switch><switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].dhcp-end == $preload-data.network-topology-information.subnets[$n].dhcp-end-address`"><outcome value='false'>
+<block>
+<set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></block></outcome></switch><switch test="`$tmp.AnAI.l3network.subnets.subnet[$k].subnet-name == $preload-data.network-topology-information.subnets[$n].subnet-name`"><outcome value='false'>
+<block>
+<set>
+<parameter name="tmp.subnetUpdate" value="1" />
+</set></block></outcome></switch><switch test="`$tmp.subnetUpdate == 1`"><outcome value='true'>
+<update plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND subnet.subnet-id = $tmp.AnAI.l3network.subnets.subnet[$k].subnet-id" >
+ <!-- Update l3network.subnet -->
+ <parameter name="gateway-address" value="`$tmp.gateway-address`"/>
+ <parameter name="subnet-name" value="`$preload-data.network-topology-information.subnets[$n].subnet-name`"/>
+ <parameter name="cidr-mask" value="`$preload-data.network-topology-information.subnets[$n].cidr-mask`"/>
+ <parameter name="dhcp-start" value="`$preload-data.network-topology-information.subnets[$n].dhcp-start-address`"/>
+ <parameter name="dhcp-end" value="`$preload-data.network-topology-information.subnets[$n].dhcp-end-address`"/>
+ <parameter name="dhcp-enabled" value="`$tmp.dhcpEnabled.boolean`"/>
+ <parameter name="orchestration-status" value="pending-update" />
+ <outcome value='failure'>
+<block>
+<set>
+ <parameter name='k' value='`$tmp.AnAI.l3network.subnets.subnet_length + 1`' />
+ <parameter name='n' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while updating subnet attributes in AnAI with subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$k].subnet-id`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+<block>
+<set>
+ <parameter name='k' value='`$tmp.AnAI.l3network.subnets.subnet_length + 1`' />
+ <parameter name='n' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while updating subnet attributes in AnAI with subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$k].subnet-id`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<block>
+<set>
+ <parameter name="tmp.subnetRollback[$x].subnet-id" value= "`$tmp.AnAI.l3network.subnets.subnet[$k].subnet-id`"/>
+ <parameter name="tmp.subnetRollback[$x].type" value = "update"/>
+
+
+
+</set><set>
+ <parameter name="x" value = "`$x + 1`" />
+
+</set><set>
+<parameter name="tmp.l3networkUpdate" value="1" />
+</set></block></outcome></update></outcome></switch></block></outcome></switch></for><switch test="`$execute_failure`"><outcome value='false'>
+<switch test="`$tmp.start-address-match == 0`"><outcome value='true'>
+<update plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND subnet.subnet-id = $tmp.AnAI.l3network.subnets.subnet[$k].subnet-id" >
+<parameter name="orchestration-status" value="pending-delete" />
+ <outcome value='failure'>
+<block>
+<set>
+ <parameter name='k' value='`$tmp.AnAI.l3network.subnets.subnet_length + 1`' />
+ <parameter name='n' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while updating subnet status to pending-delete in AnAI with subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$k].subnet-id`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+<block>
+<set>
+ <parameter name='k' value='`$tmp.AnAI.l3network.subnets.subnet_length + 1`' />
+ <parameter name='n' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while updating subnet status to pending-delete in AnAI with subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$k].subnet-id`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<block>
+<set>
+ <parameter name="tmp.subnetRollback[$x].subnet-id" value= "`$tmp.AnAI.l3network.subnets.subnet[$k].subnet-id`"/>
+ <parameter name="tmp.subnetRollback[$x].orchestration-status" value= "`$tmp.AnAI.l3network.subnets.subnet[$k].orchestration-status`" />
+ <parameter name="tmp.subnetRollback[$x].type" value = "delete" />
+
+
+
+</set><set>
+ <parameter name="x" value = "`$x + 1`" />
+
+</set><set>
+<parameter name="tmp.l3networkUpdate" value="1" />
+</set></block></outcome></update></outcome></switch></outcome></switch></block></block></for><switch test="`$execute_failure`"><outcome value='false'>
+<for index="i" start="0" end="`$preload-data.network-topology-information.subnets_length`">
+<block atomic='true'><set>
+<parameter name="tmp.start-address-match" value="0" />
+</set><block atomic='true'><for index="j" start="0" end="`$tmp.AnAI.l3network.subnets.subnet_length`">
+<switch test="`$preload-data.network-topology-information.subnets[$i].start-address == $tmp.AnAI.l3network.subnets.subnet[$j].network-start-address`"><outcome value='true'>
+<set>
+<parameter name='tmp.start-address-match' value='1' />
+</set></outcome></switch></for><switch test="`$tmp.start-address-match == 0`"><outcome value='true'>
+<block atomic="true"><switch test="`$preload-data.network-topology-information.subnets[$i].dhcp-enabled`"><outcome value='N'><set>
+<parameter name="tmp.dhcpEnabled.boolean" value="false" />
+</set></outcome><outcome value='Y'><set>
+<parameter name="tmp.dhcpEnabled.boolean" value="true" />
+</set></outcome></switch><set>
+<parameter name='tmp.gateway-address' value='`$preload-data.network-topology-information.subnets[$i].gateway-address`' />
+</set><switch test="`$preload-data.network-topology-information.subnets[$i].gateway-address`"><outcome value=''><block>
+<execute plugin="org.openecomp.sdnc.sli.plugin.ipAddressTools.IpAddressTool" method="getGatewayAddress">
+ <parameter name="ipAddress" value="`$preload-data.network-topology-information.subnets[$i].start-address`" />
+ <parameter name="ipVersion" value="`$preload-data.network-topology-information.subnets[$i].ip-version`" />
+ <parameter name="subnet" value="`$preload-data.network-topology-information.subnets[$i].cidr-mask`" />
+ <parameter name="ctxVariable" value="tmp.return.generate.gateway-address" /></execute><set>
+<parameter name="tmp.gateway-address" value="`$tmp.return.generate.gateway-address`" />
+</set></block></outcome></switch><set>
+<parameter name="tmp.local.network-id" value="`$tmp.AnAI.l3network.network-id`" />
+</set><call module="VNF-API" rpc="generate-subnets-subnet-id" mode="sync" >
+<outcome value='failure'>
+<block>
+<set>
+ <parameter name='j' value='`$tmp.AnAI.l3subnet_length + 1`' />
+ <parameter name='i' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving new subnet in AnAI with subnet-id = ' + $tmp.return.generate-subnets-subnet-id.uuid`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome></call><save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND subnet.subnet-id = $tmp.return.generate-subnets-subnet-id.uuid" >
+ <!-- Create l3-network object -->
+ <parameter name="network-id" value="`$tmp.AnAI.l3network.network-id`" />
+ <parameter name="subnet-id" value="`$tmp.return.generate-subnets-subnet-id.uuid`" />
+ <parameter name="gateway-address" value="`$tmp.gateway-address`" />
+ <parameter name="subnet-name" value="`$preload-data.network-topology-information.subnets[$i].subnet-name`" />
+ <parameter name="network-start-address" value="`$preload-data.network-topology-information.subnets[$i].start-address`" />
+ <parameter name="cidr-mask" value="`$preload-data.network-topology-information.subnets[$i].cidr-mask`" />
+ <parameter name="ip-version" value="`$preload-data.network-topology-information.subnets[$i].ip-version`" />
+ <parameter name="dhcp-start" value="`$preload-data.network-topology-information.subnets[$i].dhcp-start-address`" />
+ <parameter name="dhcp-end" value="`$preload-data.network-topology-information.subnets[$i].dhcp-end-address`" />
+ <parameter name="dhcp-enabled" value="`$tmp.dhcpEnabled.boolean`" />
+ <parameter name="orchestration-status" value="pending-create" /><outcome value='failure'>
+<block>
+<set>
+ <parameter name='j' value='`$tmp.AnAI.l3subnet_length + 1`' />
+ <parameter name='i' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving new subnet in AnAI with subnet-id = ' + $tmp.return.generate-subnets-subnet-id.uuid`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+<block>
+<set>
+ <parameter name='j' value='`$tmp.AnAI.l3subnet_length + 1`' />
+ <parameter name='i' value='`$preload-data.network-topology-information.subnets_length + 1`' /></set><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving new subnet in AnAI with subnet-id = ' + $tmp.return.generate-subnets-subnet-id.uuid`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<block>
+<set>
+ <parameter name="tmp.subnetRollback[$x].subnet-id" value= "`$tmp.return.generate-subnets-subnet-id.uuid`" />
+ <parameter name="tmp.subnetRollback[$x].type" value = "create" /></set><set>
+ <parameter name="x" value = "`$x + 1`" />
+
+</set><set>
+<parameter name='tmp.l3networkUpdate' value='1' />
+</set></block></outcome></save></block></outcome></switch></block></block></for></outcome></switch><switch test="`$execute_failure`"><outcome value='false'>
+<block atomic='true'><delete plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND related-to = vpn-binding" ><outcome value='failure'>
+<block>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="An error occurred while deleting l3-network vpn-binding relationship from AnAI"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome></delete><switch test="`$execute_failure`"><outcome value='false'>
+<block atomic='true'><switch test="`$preload-data.network-topology-information.vpn-bindings_length`"><outcome value=''><set>
+<parameter name="preload-data.network-topology-information.vpn-bindings_length" value="0" />
+</set></outcome></switch><for index="i" start="0" end="`$preload-data.network-topology-information.vpn-bindings_length`">
+<block atomic='true'><set>
+<parameter name="tmp.vpn-binding-id" value="" />
+</set><switch test="`$preload-data.network-topology-information.vpn-bindings[$i].vpn-binding-id`"><outcome value='Other'>
+<set>
+<parameter name="tmp.vpn-binding-id" value="`$preload-data.network-topology-information.vpn-bindings[$i].vpn-binding-id`" />
+</set></outcome></switch><switch test="`$preload-data.network-topology-information.vpn-bindings[$i].global-route-target != ''`" ><outcome value='true'>
+<get-resource plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="vpn-binding"
+ key="vpn-binding.global-route-target = $preload-data.network-topology-information.vpn-bindings[$i].global-route-target"
+ pfx="tmp.AnAI.vpn-binding"><outcome value='not-found'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'Failed to query vpn-bindings n AnAI where global-route-target = ' + $preload-data.network-topology-information.vpn-bindings[$i].global-route-target`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'Failed to query vpn-bindings n AnAI where global-route-target = ' + $preload-data.network-topology-information.vpn-bindings[$i].global-route-target`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<set>
+<parameter name="tmp.vpn-binding-id" value="`$tmp.AnAI.vpn-binding.vpn-id`" />
+</set></outcome></get-resource></outcome></switch><switch test="`$execute_failure`"><outcome value='false'>
+<switch test="`$tmp.vpn-binding-id != ''`"><outcome value='true'>
+<save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="relationship-list.relationship[0].related-to" value="vpn-binding" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="vpn-binding.vpn-id" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.vpn-binding-id`" /><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving l3-newtork vpn-binding relationship in AnAI where vpn-id = ' + $tmp.vpn-binding-id`"/></set><set>
+ <parameter name="i" value = "`$preload-data.network-topology-information.vpn-bindings_length + 1`" />
+
+</set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving l3-newtork vpn-binding relationship in AnAI where vpn-id = ' + $tmp.vpn-binding-id`"/></set><set>
+ <parameter name="i" value = "`$preload-data.network-topology-information.vpn-bindings_length + 1`" />
+
+</set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<set>
+<parameter name='tmp.vpn-binding.updated' value='1' />
+</set></outcome></save></outcome></switch></outcome></switch></block></for></block></outcome></switch></block></outcome></switch><switch test="`$execute_failure`"><outcome value='false'>
+<block atomic='true'><delete plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND related-to = network-policy" ><outcome value='failure'>
+<block>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="An error occurred while deleting l3-network network-policy relationship from AnAI in preparation to regenerate the network-policy relationship from PRELOAD."/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome></delete><switch test="`$execute_failure`"><outcome value='false'>
+<block atomic='true'><switch test="`$preload-data.network-topology-information.network-policy_length`"><outcome value=''><set>
+<parameter name='preload-data.network-topology-information.network-policy_length' value='0' />
+</set></outcome></switch><for index="i" start="0" end="`$preload-data.network-topology-information.network-policy_length`">
+<switch test="`$preload-data.network-topology-information.network-policy[$i].network-policy-fqdn != NULL`"><outcome value='true'>
+<get-resource plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="network-policy"
+ key="network-policy.network-policy-fqdn = $preload-data.network-topology-information.network-policy[$i].network-policy-fqdn"
+ pfx="tmp.AnAI.network-policy" ><outcome value='not-found'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'Failed to query network-policy n AnAI where network-policy-fqdn = ' + $preload-data.network-topology-information.network-policy[$i].network-policy-fqdn`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'Failed to query network-policy n AnAI where network-policy-fqdn = ' + $preload-data.network-topology-information.network-policy[$i].network-policy-fqdn`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="relationship-list.relationship[0].related-to" value="network-policy" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="network-policy.network-policy-id" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.network-policy.network-policy-id`" /><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving l3-newtork network-policy relationship in AnAI where network-policy-id = ' + $tmp.AnAI.network-policy.network-policy-id`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+</outcome><outcome value='success'>
+<set>
+<parameter name='tmp.network-policy.updated' value='1' />
+</set></outcome></save></outcome></get-resource></outcome></switch></for></block></outcome></switch></block></outcome></switch><switch test="`$execute_failure`"><outcome value='false'>
+<block atomic='true'><delete plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND related-to = route-table-reference" ><outcome value='failure'>
+<block>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="An error occurred while deleting l3-network route-table-reference relationship from AnAI prior to regenerate the route-table-reference relationship from PRELOAD."/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome></delete><switch test="`$execute_failure`"><outcome value='false'>
+<block atomic='true'><switch test="`$preload-data.network-topology-information.route-table-reference_length`"><outcome value=''><set>
+<parameter name='preload-data.network-topology-information.route-table-reference_length' value='0' />
+</set></outcome></switch><for index="i" start="0" end="`$preload-data.network-topology-information.route-table-reference_length`">
+<switch test="`$preload-data.network-topology-information.route-table-reference[$i].route-table-reference-fqdn != NULL`"><outcome value='true'>
+<get-resource plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="route-table-reference"
+ key="route-table-reference.route-table-reference-fqdn = $preload-data.network-topology-information.route-table-reference[$i].route-table-reference-fqdn"
+ pfx="tmp.AnAI.route-table-reference"><outcome value='not-found'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'Failed to query network-policy n AnAI where network-policy-fqdn = ' + $preload-data.network-topology-information.network-policy[$i].network-policy-fqdn`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'Failed to query network-policy n AnAI where network-policy-fqdn = ' + $preload-data.network-topology-information.network-policy[$i].network-policy-fqdn`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="relationship-list.relationship[0].related-to" value="route-table-reference" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="route-table-reference.route-table-reference-id" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.route-table-reference.route-table-reference-id`" /><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="`'An error occurred while saving l3-newtork route-table-reference relationship in AnAI where route-table-reference-id = ' + $tmp.AnAI.route-table-reference.route-table-reference-id`"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+</outcome><outcome value='success'>
+<set>
+<parameter name='tmp.route-table-reference.updated' value='1' />
+</set></outcome></save></outcome></get-resource></outcome></switch></for></block></outcome></switch></block></outcome></switch><switch test="`$execute_failure`"><outcome value='false'>
+<switch test="`$tmp.l3networkUpdate == 1`">
+<outcome value='true'>
+<update plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="orchestration-status" value="pending-update" /><outcome value='failure'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="An error occurred while updating l3-network.orchestration-status in AnAI"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='not-found'>
+<block><set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.error-message" value="An error occurred while updating l3-network.orchestration-status in AnAI"/></set><return status='success'>
+ <parameter name='execute_failure' value='true' />
+</return></block></outcome><outcome value='success'>
+<set>
+<parameter name='tmp.l3network.status.updated' value='1' />
+</set></outcome></update></outcome></switch></outcome></switch><switch test="`$execute_failure`"><outcome value="true"><block atomic='true'><for index="z" start="0" end="`$tmp.AnAI.l3network.relationship-list.relationship_length`">
+<switch test="`$tmp.AnAI.l3network.relationship-list.relationship[$z].related-to`"><outcome value='vpn-binding'>
+<switch test="`$tmp.vpn-binding.updated == 1`"><outcome value='true'>
+<save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="relationship-list.relationship[0].related-to" value="vpn-binding" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="vpn-binding.vpn-id" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value`" /><outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'An error occurred during rollback of l3-newtork vpn-binding relationship in AnAI where vpn-id = ' + $tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'An error occurred during rollback of l3-newtork vpn-binding relationship in AnAI where vpn-id = ' + $tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></save></outcome></switch></outcome><outcome value='network-policy'>
+<switch test="`$tmp.network-policy.updated == 1`"><outcome value='true'>
+<save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="relationship-list.relationship[0].related-to" value="network-policy" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="network-policy.network-policy-id" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value`" /><outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'An error occurred during rollback of l3-newtork network-policy relationship in AnAI where network-policy-id = ' + $tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'An error occurred during rollback of l3-newtork network-policy relationship in AnAI where network-policy-id = ' + $tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></save></outcome></switch></outcome><outcome value='route-table-reference'>
+<switch test="`$tmp.route-table-reference.updated == 1`"><outcome value='true'>
+<save plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network:relationship-list"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="relationship-list.relationship[0].related-to" value="route-table-reference" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="route-table-reference.route-table-reference-id" />
+<parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value`" /><outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'An error occurred during rollback of l3-newtork route-table-reference relationship in AnAI where route-table-reference-id = ' + $tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'An error occurred during rollback of l3-newtork route-table-reference relationship in AnAI where route-table-reference-id = ' + $tmp.AnAI.l3network.relationship-list.relationship[$z].relationship-data[0].relationship-value + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></save></outcome></switch></outcome></switch></for><for index="j" start="0" end="`$x`">
+<block atomic='true'><set>
+ <parameter name="tmp.rollback.match" value="0"/></set><for index="i" start="0" end="`$tmp.AnAI.l3network.subnets.subnet_length`">
+<switch test="`$tmp.AnAI.l3network.subnets.subnet[$i].subnet-id == $tmp.subnetRollback[$j].subnet-id`"><outcome value='true'>
+<block atomic='true'><switch test="`$tmp.subnetRollback[$j].type`"><outcome value='delete'>
+<update plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND subnet.subnet-id = $tmp.subnetRollback[$j].subnet-id" >
+<parameter name="orchestration-status" value="`$tmp.AnAI.l3network.subnets.subnet[$i].orchestration-status`" />
+ <outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback the subnet.orchestration-status in AnAI where subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$i].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback the subnet.orchestration-status in AnAI where subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$i].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></update></outcome><outcome value='update'>
+<update plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND subnet.subnet-id = $tmp.AnAI.l3network.subnets.subnet[$j].subnet-id" >
+<parameter name="subnet-name" value="`$tmp.AnAI.l3network.subnets.subnet[$i].subnet-name`"/>
+<parameter name="gateway-address" value="`$tmp.AnAI.l3network.subnets.subnet[$i].gateway-address`"/>
+<parameter name="cidr-mask" value="`$tmp.AnAI.l3network.subnets.subnet[$i].cidr-mask`"/>
+<parameter name="dhcp-start" value="`$tmp.AnAI.l3network.subnets.subnet[$i].dhcp-start`"/>
+<parameter name="dhcp-end" value="`$tmp.AnAI.l3network.subnets.subnet[$i].dhcp-end`"/>
+<parameter name="dhcp-enabled" value="`$tmp.AnAI.l3network.subnets.subnet[$i].dhcp-enabled`"/>
+<parameter name="orchestration-status" value="`$tmp.AnAI.l3network.subnets.subnet[$i].orchestration-status`" />
+ <outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback the subnet attributes update in AnAI where subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$i].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback the subnet attributes update in AnAI where subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$i].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></update></outcome></switch><set>
+ <parameter name="tmp.rollback.match" value="1"/></set></block></outcome></switch></for><switch test="`$tmp.rollback.match == 0`"><outcome value='true'>
+<switch test="`$tmp.subnetRollback[$j].type`"><outcome value='create'>
+<delete plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="subnet"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id
+ AND subnet.subnet-id = $tmp.subnetRollback[$j].subnet-id" ><outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback to delete subnet from AnAI where subnet-id = ' + $tmp.subnetRollback[$j].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback to delete subnet from AnAI where subnet-id = ' + $tmp.subnetRollback[$j].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></delete></outcome></switch></outcome></switch></block></for><switch test="`$tmp.l3network.status.updated == 1`">
+<outcome value='true'>
+<update plugin="org.openecomp.sdnc.sli.aai.AAIService"
+ resource="l3-network"
+ key="l3-network.network-id = $tmp.AnAI.l3network.network-id" >
+<parameter name="orchestration-status" value="`$tmp.AnAI.l3network.orchestration-status`" /><outcome value='failure'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback l3network.orchestration-status in AnAI where subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$i].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome><outcome value='not-found'>
+<set>
+ <parameter name="error-code" value="500"/>
+ <parameter name="tmp.rollback.error-message" value="`'failed to rollback l3network.orchestration-status in AnAI where subnet-id = ' + $tmp.AnAI.l3network.subnets.subnet[$i].subnet-id + ' MANUAL ROLLBACK IS REQUIRED.'`"/></set></outcome></update></outcome></switch><return status='failure'>
+ <parameter name='error-code' value='500'/>
+ <parameter name='error-message' value="`'Error updating l3-network in AnAI with network-id = ' + $tmp.AnAI.l3network.network-id + ' - ' + $tmp.error-message + ' - ' + $tmp.rollback.error-message`"/></return></block></outcome></switch><set>
+<parameter name="ack-final" value="Y"/></set><return status="success">
+ <parameter name="networkId" value="`$network-topology-operation-input.network-request-information.network-id`" />
+ <parameter name="error-code" value="200" /></return></block></method></service-logic>
Code Review / sdnc / oam.git / blobdiff