-<!--
- ============LICENSE_START=======================================================
- openECOMP : SDN-C
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property. All rights
- reserved.
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END=========================================================
- -->
-
-<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd" module='VNF-API' version='${project.version}'><method rpc='vnf-topology-changeassign' mode='sync'>
-<block atomic="true"><switch test="`$service-data.oper-status.order-status == Active`">
-<!--
-leaf order-status {
- type enumeration {
- enum "Active";
- enum "PendingAssignment";
- enum "PendingCreate";
- enum "PendingUpdate";
- enum "Deleted";
- }
-}
---><outcome value='false'><return status='failure'>
- <parameter name='error-code' value='400'/>
- <parameter name='error-message' value='Invalid service-data order status'/></return></outcome></switch><call module='VNF-API' rpc='vnf-topology-assign-vfmodule' mode='sync' ></call><get-resource plugin="org.openecomp.sdnc.sli.aai.AAIService"
- resource="vf-module"
- key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id
- and generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id"
- local-only="false"
- pfx="tmp.AnAI.vfmodule"><outcome value='failure'>
-<return status='failure'>
- <parameter name='error-code' value='500'/>
- <parameter name='error-message' value="`'An error occurred while querying vf-module from AnAI with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`"/></return></outcome><outcome value='not-found'>
-<return status='failure'>
- <parameter name='error-code' value='500'/>
- <parameter name='error-message' value="`'An error occurred while querying vf-module from AnAI with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`"/></return></outcome></get-resource><delete plugin="org.openecomp.sdnc.sli.aai.AAIService"
- resource="vf-module:relationship-list"
- key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id
- AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id
- AND related-to = l3-network"
- force="true"
- local-only="false"><outcome value='failure'>
-<return status='failure'>
- <parameter name='error-code' value='500'/>
- <parameter name='error-message' value="`'An error occurred while deleting existing vf-module l3-network relationship in AnAI with with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id + ' vf-module update FAILED.'`"/></return></outcome></delete><for index="i" start="0" end="`$service-data.vnf-topology-information.vnf-assignments.vnf-networks_length`"><save plugin="org.openecomp.sdnc.sli.aai.AAIService"
- resource="vf-module:relationship-list"
- key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id
- AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id"
- force="true"
- local-only="false">
-
- <parameter name="relationship-list.relationship[0].related-to" value="l3-network" />
- <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="l3-network.network-id" />
- <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$service-data.vnf-topology-information.vnf-assignments.vnf-networks[$i].network-id`" /><outcome value='failure'>
-<block>
-<set>
- <parameter name="error-code" value="500" />
- <parameter name="error-message" value="`' | An error occurred while saving l3-network relationship with network-id = ' + $service-data.vnf-topology-information.vnf-assignments.vnf-networks[$i].network-id + ' for vf-module with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`" />
-</set><delete plugin="org.openecomp.sdnc.sli.aai.AAIService"
- resource="vf-module:relationship-list"
- key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id
- AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id
- AND related-to = l3-network"
- force="true"
- local-only="false"></delete><for index="i" start="0" end="`$tmp.AnAI.vfmodule.relationship-list.relationship_length`"><switch test="`$tmp.AnAI.vfmodule.relationship-list.relationship[$i].related-to`"><outcome value='l3-network'><for index="j" start="0" end="`$tmp.AnAI.vfmodule.relationship-list.relationship[$i].relationship-data_length`"><save plugin="org.openecomp.sdnc.sli.aai.AAIService"
- resource="vf-module:relationship-list"
- key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id
- AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id"
- force="true"
- local-only="false">
-
- <parameter name="relationship-list.relationship[0].related-to" value="l3-network" />
- <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="l3-network.network-id" />
- <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.vfmodule.relationship-list.relationship[$i].relationship-data[$j].relationship-value`" /><outcome value='failure'>
-<set>
- <parameter name="error-code" value="500" />
- <parameter name="error-message" value="`$error-message + ' | An error occurred while during rollback of l3-network relationship for vf-module with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`" />
-</set></outcome><outcome value='not-found'>
-<set>
- <parameter name="error-code" value="500" />
- <parameter name="error-message" value="`$error-message + ' | An error occurred while during rollback of l3-network relationship for vf-module with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`" />
-</set></outcome></save></for></outcome></switch></for><return status='failure'>
- <parameter name='error-code' value='500'/>
- <parameter name='error-message' value="`'Failed to update vf-module l3-network relationship in AnAI. ' + $error-message`"/></return></block></outcome></save></for><set>
- <parameter name="service-data.oper-status.last-order-status" value="`$service-data.oper-status.order-status`"/></set><set>
- <parameter name="service-data.oper-status.order-status" value="PendingUpdate"/></set><set>
- <parameter name="service-data.oper-status.last-action" value="`$service-data.request-information.request-action`"/></set><set>
-<parameter name="ack-final" value="Y"/></set><return status='success'>
- <parameter name="error-code" value="200" /></return></block></method></service-logic>
+<service-logic xmlns='http://www.openecomp.org/sdnc/svclogic' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd' module='VNF-API' version='${project.version}'><method rpc='vnf-topology-changeassign' mode='sync'>\r
+<block atomic="true"><switch test="`$service-data.oper-status.order-status == Active`">\r
+<!--\r
+leaf order-status {\r
+ type enumeration {\r
+ enum "Active";\r
+ enum "PendingAssignment";\r
+ enum "PendingCreate";\r
+ enum "PendingUpdate";\r
+ enum "Deleted";\r
+ }\r
+}\r
+--><outcome value='false'><return status='failure'>\r
+ <parameter name='error-code' value='400'/>\r
+ <parameter name='error-message' value='Invalid service-data order status'/></return></outcome></switch><call module='VNF-API' rpc='vnf-topology-assign-vfmodule' mode='sync' ></call><get-resource plugin="org.openecomp.sdnc.sli.aai.AAIService" \r
+ resource="vf-module" \r
+ key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id \r
+ and generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id" \r
+ local-only="false" \r
+ pfx="tmp.AnAI.vfmodule"><outcome value='failure'>\r
+<return status='failure'>\r
+ <parameter name='error-code' value='500'/>\r
+ <parameter name='error-message' value="`'An error occurred while querying vf-module from AnAI with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`"/></return></outcome><outcome value='not-found'>\r
+<return status='failure'>\r
+ <parameter name='error-code' value='500'/>\r
+ <parameter name='error-message' value="`'An error occurred while querying vf-module from AnAI with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`"/></return></outcome></get-resource><delete plugin="org.openecomp.sdnc.sli.aai.AAIService" \r
+ resource="vf-module:relationship-list" \r
+ key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id \r
+ AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id \r
+ AND related-to = l3-network" \r
+ force="true" \r
+ local-only="false"><outcome value='failure'>\r
+<return status='failure'>\r
+ <parameter name='error-code' value='500'/>\r
+ <parameter name='error-message' value="`'An error occurred while deleting existing vf-module l3-network relationship in AnAI with with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id + ' vf-module update FAILED.'`"/></return></outcome></delete><switch test="`$service-data.vnf-topology-information.vnf-assignments.vnf-networks_length`"><outcome value=''><set>\r
+<parameter name = "service-data.vnf-topology-information.vnf-assignments.vnf-networks_length" value="0" />\r
+</set></outcome></switch><for index="i" start="0" end="`$service-data.vnf-topology-information.vnf-assignments.vnf-networks_length`"><save plugin="org.openecomp.sdnc.sli.aai.AAIService" \r
+ resource="vf-module:relationship-list" \r
+ key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id \r
+ AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id" \r
+ force="true" \r
+ local-only="false">\r
+ \r
+ <parameter name="relationship-list.relationship[0].related-to" value="l3-network" />\r
+ <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="l3-network.network-id" />\r
+ <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$service-data.vnf-topology-information.vnf-assignments.vnf-networks[$i].network-id`" /><outcome value='failure'>\r
+<block>\r
+<set>\r
+ <parameter name="error-code" value="500" />\r
+ <parameter name="error-message" value="`' | An error occurred while saving l3-network relationship with network-id = ' + $service-data.vnf-topology-information.vnf-assignments.vnf-networks[$i].network-id + ' for vf-module with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`" />\r
+</set><delete plugin="org.openecomp.sdnc.sli.aai.AAIService" \r
+ resource="vf-module:relationship-list" \r
+ key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id \r
+ AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id \r
+ AND related-to = l3-network" \r
+ force="true" \r
+ local-only="false"></delete><for index="i" start="0" end="`$tmp.AnAI.vfmodule.relationship-list.relationship_length`"><switch test="`$tmp.AnAI.vfmodule.relationship-list.relationship[$i].related-to`"><outcome value='l3-network'><for index="j" start="0" end="`$tmp.AnAI.vfmodule.relationship-list.relationship[$i].relationship-data_length`"><save plugin="org.openecomp.sdnc.sli.aai.AAIService" \r
+ resource="vf-module:relationship-list" \r
+ key="vf-module.vf-module-id = $vnf-topology-operation-input.vnf-request-information.vnf-id \r
+ AND generic-vnf.vnf-id = $vnf-topology-operation-input.vnf-request-information.generic-vnf-id" \r
+ force="true" \r
+ local-only="false">\r
+ \r
+ <parameter name="relationship-list.relationship[0].related-to" value="l3-network" />\r
+ <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="l3-network.network-id" />\r
+ <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.AnAI.vfmodule.relationship-list.relationship[$i].relationship-data[$j].relationship-value`" /><outcome value='failure'>\r
+<set>\r
+ <parameter name="error-code" value="500" />\r
+ <parameter name="error-message" value="`$error-message + ' | An error occurred while during rollback of l3-network relationship for vf-module with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`" />\r
+</set></outcome><outcome value='not-found'>\r
+<set>\r
+ <parameter name="error-code" value="500" />\r
+ <parameter name="error-message" value="`$error-message + ' | An error occurred while during rollback of l3-network relationship for vf-module with vf-module-id = ' + $vnf-topology-operation-input.vnf-request-information.vnf-id + ' and generic-vnf-id = ' + $vnf-topology-operation-input.vnf-request-information.generic-vnf-id`" />\r
+</set></outcome></save></for></outcome></switch></for><return status='failure'>\r
+ <parameter name='error-code' value='500'/>\r
+ <parameter name='error-message' value="`'Failed to update vf-module l3-network relationship in AnAI. ' + $error-message`"/></return></block></outcome></save></for><set>\r
+ <parameter name="service-data.oper-status.last-order-status" value="`$service-data.oper-status.order-status`"/></set><set>\r
+ <parameter name="service-data.oper-status.order-status" value="PendingUpdate"/></set><set>\r
+ <parameter name="service-data.oper-status.last-action" value="`$service-data.request-information.request-action`"/></set><set>\r
+<parameter name="ack-final" value="Y"/></set><return status='success'>\r
+ <parameter name="error-code" value="200" /></return></block></method></service-logic>
\ No newline at end of file
Code Review / sdnc / oam.git / blobdiff