-<service-logic xmlns='http://www.onap.org/sdnc/svclogic' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='GENERIC-RESOURCE-API' version='1.2.0-SNAPSHOT-INT110901'>\r
+<service-logic\r
+ xmlns='http://www.onap.org/sdnc/svclogic'\r
+ xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='GENERIC-RESOURCE-API' version='${project.version}'>\r
<method rpc='vf-module-topology-operation-assign' mode='sync'>\r
- <block atomic="true">\r
- <switch test='`$vf-module-topology-operation-input.request-information.request-action`'>\r
- <outcome value='CreateVfModuleInstance'>\r
- <block></block>\r
- </outcome>\r
- <outcome value='Other'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="If svc-action is 'assign' then request-action must be 'CreateVfModuleInstance'" />\r
- </return>\r
- </outcome>\r
- </switch>\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from VF_MODULE_MODEL WHERE customization_uuid = $vf-module-topology-operation-input.vf-module-information.onap-model-information.model-customization-uuid'\r
- pfx='db.vf-module-model'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading VF_MODULE_MODEL table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No model found for VF module customization UUID ' + $vf-module-topology-operation-input.vf-module-information.onap-model-information.model-customization-uuid`" />\r
- </return>\r
- </outcome>\r
- </get-resource>\r
- <set>\r
- <parameter name='vnf-index' value='-1' />\r
- </set>\r
- <switch test='`$service-data.vnfs.vnf_length`'>\r
- <outcome value=''>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="There are no VNFs defined in MD-SAL" />\r
- </return>\r
- </outcome>\r
- <outcome value='Other'>\r
- <for index='idx' start='0' end='`$service-data.vnfs.vnf_length`' >\r
- <switch test='`$service-data.vnfs.vnf[$idx].vnf-id == $vf-module-topology-operation-input.vnf-information.vnf-id`'>\r
- <outcome value='true'>\r
- <block>\r
- <set>\r
- <parameter name='vnf-index' value='`$idx`' />\r
- </set>\r
- <break></break>\r
- </block>\r
- </outcome>\r
- </switch>\r
- </for>\r
- </outcome>\r
- </switch>\r
- <switch test='`$vnf-index`'>\r
- <outcome value='-1'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'Unable to find VNF ID ' + $vf-module-topology-operation-input.vnf-information.vnf-id + ' in MD-SAL'`" />\r
- </return>\r
- </outcome>\r
- </switch>\r
- <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vnf-level-oper-status.order-status`'>\r
- <outcome value='Created'>\r
- <block></block>\r
- </outcome>\r
- <outcome value='Other'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'VNF order status is ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vnf-level-oper-status.order-status + ' but should be Created'`" />\r
- </return>\r
- </outcome>\r
- </switch>\r
- <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`'>\r
- <outcome value=''>\r
- <set>\r
- <parameter name='vf-module-index' value='0' />\r
- </set>\r
- </outcome>\r
- <outcome value='Other'>\r
- <block>\r
- <set>\r
- <parameter name='vf-module-index' value='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`' />\r
- </set>\r
- <for index='idx' start='0' end='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length`' >\r
- <switch test='`$vf-module-topology-operation-input.vf-module-information.vf-module-id == $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$idx].vf-module-id`'>\r
- <outcome value='true'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'VF module id ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$idx].vf-module-id + ' already exists, and status is ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$idx].vf-module-data.vf-module-level-oper-status.order-status`" />\r
- </return>\r
- </outcome>\r
- </switch>\r
- </for>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <set>\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module_length' value='`$vf-module-index + 1`' />\r
- </set>\r
- <set>\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id'\r
- value='`$vf-module-topology-operation-input.vf-module-information.vf-module-id`' />\r
- </set>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-topology-identifier.vf-module-id' value='`$vf-module-topology-operation-input.vf-module-information.vf-module-id`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-topology-identifier.vf-module-name' value='`$vf-module-topology-operation-input.vf-module-request-input.vf-module-name`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-topology-identifier.vf-module-type' value='`$vf-module-topology-operation-input.vf-module-information.vf-module-type`' />\r
- <parameter name='tmp.vf-module-topology.tenant' value='`$vf-module-topology-operation-input.vf-module-request-input.tenant`' />\r
- <parameter name='tmp.vf-module-topology.aic-cloud-region' value='`$vf-module-topology-operation-input.vf-module-request-input.aic-cloud-region`' />\r
- </set>\r
- <get-resource plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"\r
- resource="cloud-region"\r
- key="cloud-region.cloud-owner = 'CloudOwner' AND\r
- cloud-region.cloud-region-id = $vf-module-topology-operation-input.vf-module-request-input.aic-cloud-region"\r
- pfx='aai.cloud-region' local-only='false' >\r
- <outcome value='not-found'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Cloud region not found in AAI" />\r
- </return>\r
- </outcome>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error retrieving cloud region from AAI" />\r
- </return>\r
- </outcome>\r
- </get-resource>\r
- <for index='idx' start='0' end='`$aai.cloud-region.relationship-list.relationship_length`' >\r
- <switch test='`$aai.cloud-region.relationship-list.relationship[$idx].related-to`'>\r
- <outcome value='complex'>\r
- <block atomic="true">\r
- <execute plugin='org.onap.ccsdk.sli.core.slipluginutils.SliStringUtils' method='split'>\r
- <parameter name='ctx_memory_result_key' value='aai-uid-split' />\r
- <parameter name='original_string' value='`$aai.cloud-region.relationship-list.relationship[$idx].related-link`' />\r
- <parameter name='regex' value='/' />\r
- </execute>\r
- <set>\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.aic-clli'\r
- value='`$aai-uid-split[$aai-uid-split_length - 1]`' />\r
- </set>\r
- <break></break>\r
- </block>\r
- </outcome>\r
- </switch>\r
- </for>\r
- <switch test='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.aic-clli`'>\r
- <outcome value=''>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'Unable to find aic-clli in AAI for aic-cloud-region ' + $vf-module-topology-operation-input.vf-module-request-input.aic-cloud-region`" />\r
- </return>\r
- </outcome>\r
- </switch>\r
- <switch test='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-invariant-uuid`'>\r
- <outcome value=''>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-invariant-uuid'\r
- value='`$db.vf-module-model.invariant-uuid`' />\r
- </set>\r
- </outcome>\r
- <outcome value='Other'>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-invariant-uuid'\r
- value='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-invariant-uuid`' />\r
- </set>\r
- </outcome>\r
- </switch>\r
- <switch test='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-uuid`'>\r
- <outcome value=''>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-uuid'\r
- value='`$db.vf-module-model.uuid`' />\r
- </set>\r
- </outcome>\r
- <outcome value='Other'>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-uuid'\r
- value='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-uuid`' />\r
- </set>\r
- </outcome>\r
- </switch>\r
- <switch test='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-version`'>\r
- <outcome value=''>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-version'\r
- value='`$db.vf-module-model.version`' />\r
- </set>\r
- </outcome>\r
- <outcome value='Other'>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-version'\r
- value='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-version`' />\r
- </set>\r
- </outcome>\r
- </switch>\r
- <switch test='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-name`'>\r
- <outcome value=''>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-name'\r
- value='`$db.vf-module-model.name`' />\r
- </set>\r
- </outcome>\r
- <outcome value='Other'>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-name'\r
- value='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-name`' />\r
- </set>\r
- </outcome>\r
- </switch>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.onap-model-information.model-customization-uuid'\r
- value='`$vf-module-topology-operation-input.vf-module-information.onap-model-information.model-customization-uuid`' />\r
- </set>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-parameters.'\r
- value='vf-module-topology-operation-input.vf-module-request-input.vf-module-input-parameters.' />\r
- </set>\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from VF_MODULE_TO_VFC_MAPPING WHERE vf_module_customization_uuid = $vf-module-topology-operation-input.vf-module-information.onap-model-information.model-customization-uuid'\r
- pfx='db.vf-module-to-vfc-mapping[]'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading VF_MODULE_TO_VFC_MAPPING table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <set>\r
- <parameter name='db.vf-module-to-vfc-mapping_length' value='0' />\r
- </set>\r
+ <block>\r
+ <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode' method='readProperties' >\r
+ <parameter name='fileName' value='%SDNC_CONFIG_DIR%/generic-resource-api-dg.properties' />\r
+ <parameter name='contextPrefix' value='prop' />\r
+ </execute>\r
+ <switch test='length($vf-module-topology-operation-input.sdnc-request-header.svc-notification-url) == 0'>\r
+ <outcome value='true'>\r
+ <call module='GENERIC-RESOURCE-API' rpc='vf-module-topology-operation-assign-sync' mode='sync' ></call>\r
</outcome>\r
- </get-resource>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm_length'\r
- value='`$db.vf-module-to-vfc-mapping_length`' />\r
- </set>\r
- <for index='vm-type-index' start='0' end='`$db.vf-module-to-vfc-mapping_length`' >\r
- <block atomic="true">\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from VFC_MODEL WHERE customization_uuid = $db.vf-module-to-vfc-mapping[$vm-type-index].vfc-customization-uuid'\r
- pfx='db.vfc-model'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading VFC_MODEL table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No entries found in VFC_MODEL table for customization UUID ' + $db.vf-module-to-vfc-mapping[$db-vm-index].vfc_customization_uuid`" />\r
- </return>\r
+ <outcome value='false'>\r
+ <switch test='$vf-module-topology-operation-input.sdnc-request-header.svc-notification-url) == $prop.so.ignore-url'>\r
+ <outcome value='true'>\r
+ <call module='GENERIC-RESOURCE-API' rpc='vf-module-topology-operation-assign-sync' mode='sync' ></call>\r
</outcome>\r
- </get-resource>\r
- <switch test="$db.vfc-model.ecomp-generated-naming == 'Y'">\r
<outcome value='false'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'ECOMP generated naming is not Y for VFC customization UUID ' + $db.vf-module-to-vfc-mapping[$db-vm-index].vfc_customization_uuid`" />\r
- </return>\r
+ <call module='GENERIC-RESOURCE-API' rpc='vf-module-topology-operation-assign-async' mode='sync' ></call>\r
</outcome>\r
</switch>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-type'\r
- value='`$db.vf-module-to-vfc-mapping[$vm-type-index].vm-type`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].nfc-naming-code'\r
- value='`$db.vfc-model.nfc-naming-code`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-type-tag'\r
- value='`$db.vfc-model.vm-type-tag`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-count'\r
- value='`$db.vf-module-to-vfc-mapping[$vm-type-index].vm-count`' />\r
- </set>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vm-name_length'\r
- value='`$db.vf-module-to-vfc-mapping[$vm-type-index].vm-count`' />\r
- </set>\r
- <for index='vm-index' start='0' end='`$db.vf-module-to-vfc-mapping[$vm-type-index].vm-count`' >\r
- <block atomic="true">\r
- <set>\r
- <parameter name='generate-unique-name-input.index-table-name' value='VM_NAME_INDEX' />\r
- <parameter name='generate-unique-name-input.index-table-prefix-column' value='vm_name_prefix' />\r
- <parameter name='generate-unique-name-input.name-table-type' value='VM_INSTANCE' />\r
- <parameter name='generate-unique-name-input.prefix' value="`$service-data.vnfs.vnf[$vnf-index].vnf-name + $db.vfc-model.nfc-naming-code`" />\r
- <parameter name='generate-unique-name-input.index-length' value='3' />\r
- </set>\r
- <call module='GENERIC-RESOURCE-API' rpc='generate-unique-name' mode='sync' >\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`$generate-unique-name-output.error-message`" />\r
- </return>\r
- </outcome>\r
- <outcome value='success'>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vm-name[$vm-index]' value='`$generate-unique-name-output.generated-name`' />\r
- </set>\r
- </outcome>\r
- </call>\r
- </block>\r
- </for>\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from VFC_TO_NETWORK_ROLE_MAPPING WHERE vfc_customization_uuid = $db.vf-module-to-vfc-mapping[$vm-type-index].vfc-customization-uuid'\r
- pfx='db.vfc-to-network-role-mapping[]'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading VFC_TO_NETWORK_ROLE_MAPPING table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <set>\r
- <parameter name='db.vfc-to-network-role-mapping_length' value='0' />\r
- </set>\r
- </outcome>\r
- </get-resource>\r
- <for index='network-role-index' start='0' end='`$db.vfc-to-network-role-mapping_length`' >\r
- <block atomic="true">\r
- <set>\r
- <parameter name='network-index' value='-1' />\r
- </set>\r
- <for silentFailure='true' index='idx' start='0' end='`$service-data.networks.network_length`' >\r
- <switch test='`$service-data.networks.network[$idx].network-data.network-topology.network-topology-identifier-structure.network-role == $db.vfc-to-network-role-mapping[$network-role-index].network-role`'>\r
- <outcome value='true'>\r
- <block>\r
- <set>\r
- <parameter name='network-index' value='`$idx`' />\r
- </set>\r
- <break></break>\r
- </block>\r
- </outcome>\r
- </switch>\r
- </for>\r
- <switch test='`$network-index`'>\r
- <outcome value='-1'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No network found in MD-SAL with network-role ' + $db.vfc-to-network-role-mapping[$network-role-index].network-role`" />\r
- </return>\r
- </outcome>\r
- </switch>\r
- <!--This isn't a node in MD-SAL, but we need to save this for later when we are doing EIPAM processing-->\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-id'\r
- value='`$service-data.networks.network[$idx].network-data.network-topology.network-topology-identifier-structure.network-id`' />\r
- </set>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-role'\r
- value='`$db.vfc-to-network-role-mapping[$network-role-index].network-role`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-role-tag'\r
- value='`$db.vfc-to-network-role-mapping[$network-role-index].network-role-tag`' />\r
- </set>\r
- <switch test='`$db.vfc-to-network-role-mapping[$network-role-index].ipv4-ip-version`'>\r
- <outcome value=''>\r
- <set>\r
- <parameter name='network-information-index' value='-1' />\r
- </set>\r
- </outcome>\r
- <outcome value='4'>\r
- <block atomic="true">\r
- <set>\r
- <parameter name='network-information-index' value='0' />\r
- </set>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$network-information-index].ip-version'\r
- value='4' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$network-information-index].use-dhcp'\r
- value='`$db.vfc-to-network-role-mapping[$network-role-index].ipv4-use-dhcp`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$network-information-index].ip-count'\r
- value='`$db.vfc-to-network-role-mapping[$network-role-index].ipv4-count`' />\r
- </set>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <switch test='`$db.vfc-to-network-role-mapping[$network-role-index].ipv6-ip-version`'>\r
- <outcome value=''>\r
- <block></block>\r
- </outcome>\r
- <outcome value='6'>\r
- <block atomic="true">\r
- <set>\r
- <parameter name='network-information-index' value='`$network-information-index + 1`' />\r
- </set>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$network-information-index].ip-version'\r
- value='6' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$network-information-index].use-dhcp'\r
- value='`$db.vfc-to-network-role-mapping[$network-role-index].ipv6-use-dhcp`' />\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$network-information-index].ip-count'\r
- value='`$db.vfc-to-network-role-mapping[$network-role-index].ipv6-count`' />\r
- </set>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <switch test='`$network-information-index`'>\r
- <outcome value='-1'>\r
- <block></block>\r
- </outcome>\r
- <outcome value='Other'>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item_length'\r
- value='`$network-information-index + 1`' />\r
- </set>\r
- </outcome>\r
- </switch>\r
- </block>\r
- </for>\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network_length'\r
- value='`$db.vfc-to-network-role-mapping_length`' />\r
- </set>\r
- </block>\r
- </for>\r
- <set>\r
- <parameter name='plans-index' value='0' />\r
- </set>\r
- <for index='vm-type-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm_length`' >\r
- <block atomic="true">\r
- <for index='network-role-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network_length`' >\r
- <block atomic="true">\r
- <for index='ip-version-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item_length`' >\r
- <switch test='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].use-dhcp`'>\r
- <outcome value='N'>\r
- <block atomic="true">\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from EIPAM_IP_SUBNETS WHERE network_id = $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-id\r
- AND address_family = $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].ip-version'\r
- pfx='db.eipam-ip-subnets[]'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading EIPAM_IP_SUBNETS table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No entries found in EIPAM_IP_SUBNETS table for network ID ' + $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-id + ' and address family ' + $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].ip-version`" />\r
- </return>\r
- </outcome>\r
- </get-resource>\r
- <set>\r
- <parameter name='max-level' value='-1' />\r
- </set>\r
- <for index='subnets-index' start='0' end='`$db.eipam-ip-subnets_length`' >\r
- <block atomic="true">\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from EIPAM_IP_SUBNET_KEYS WHERE entity_id = $db.eipam-ip-subnets[$subnets-index].entity-id'\r
- pfx='db.eipam-ip-subnet-keys[]'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading EIPAM_IP_SUBNET_KEYS table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No entries found in EIPAM_IP_SUBNET_KEYS table for entity ID ' + $db.eipam-ip-subnets[$subnets-index].entity-id`" />\r
- </return>\r
- </outcome>\r
- </get-resource>\r
- <for index='keys-index' start='0' end='`$db.eipam-ip-subnet-keys_length`' >\r
- <block atomic="true">\r
- <switch test='`$db.eipam-ip-subnet-keys[$keys-index].level > $max-level`'>\r
- <outcome value='true'>\r
- <set>\r
- <parameter name='max-level' value='`$db.eipam-ip-subnet-keys[$keys-index].level`' />\r
- <parameter name='selected-entity-id' value='`$db.eipam-ip-subnet-keys[$keys-index].entity-id`' />\r
- <parameter name='selected-plan-name' value='`$db.eipam-ip-subnets[$subnets-index].plan-name`' />\r
- </set>\r
- </outcome>\r
- </switch>\r
- </block>\r
- </for>\r
- <get-resource plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='SELECT * from EIPAM_IP_SUBNET_KEYS WHERE entity_id = $selected-entity-id order by level'\r
- pfx='db.eipam-ip-subnet-keys[]'>\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error reading EIPAM_IP_SUBNET_KEYS table" />\r
- </return>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No entries found in EIPAM_IP_SUBNET_KEYS table for entity ID ' + $selected-entity-id`" />\r
- </return>\r
- </outcome>\r
- </get-resource>\r
- <for index='request-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].ip-count`' >\r
- <block atomic="true">\r
- <for index='level-index' start='0' end='`$db.eipam-ip-subnet-keys_length`' >\r
- <set>\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests[$request-index].pools[$level-index].key-name'\r
- value='`$db.eipam-ip-subnet-keys[$level-index].key-name`' />\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests[$request-index].pools[$level-index].key-value'\r
- value='`$db.eipam-ip-subnet-keys[$level-index].key-value`' />\r
- </set>\r
- </for>\r
- <set>\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests[$request-index].pools_length'\r
- value='`$db.eipam-ip-subnet-keys_length`' />\r
- </set>\r
- <set>\r
- <parameter name='generate-unique-name-input.index-table-name' value='EIPAM_CLIENT_KEY_INDEX' />\r
- <parameter name='generate-unique-name-input.index-table-prefix-column' value='vnf_name_prefix' />\r
- <parameter name='generate-unique-name-input.name-table-type' value='CLIENT_KEY' />\r
- <parameter name='generate-unique-name-input.prefix' value="`$service-data.vnfs.vnf[$vnf-index].vnf-data.vnf-topology.vnf-topology-identifier-structure.vnf-name + $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].nfc-naming-code + ':' + $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-id + ':' + $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].ip-version + ':'`" />\r
- <parameter name='generate-unique-name-input.index-length' value='' />\r
- </set>\r
- <call module='GENERIC-RESOURCE-API' rpc='generate-unique-name' mode='sync' >\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`$generate-unique-name-output.error-message`" />\r
- </return>\r
- </outcome>\r
- </call>\r
- <set>\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests[$request-index].client-key'\r
- value='`$generate-unique-name-output.generated-name`' />\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests[$request-index].info'\r
- value='`$service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id`' />\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests[$request-index].mask'\r
- value='32' />\r
- </set>\r
- </block>\r
- </for>\r
- <set>\r
- <parameter name='eipam-ip-block.plans[$plans-index].requests_length'\r
- value='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].ip-count`' />\r
- </set>\r
- </block>\r
- </for>\r
- <set>\r
- <parameter name='eipam-ip-block.plans[$plans-index].plan-name' value='`$selected-plan-name`' />\r
- <parameter name='eipam-ip-block.plans[$plans-index].address-family'\r
- value='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].ip-version`' />\r
- </set>\r
- <set>\r
- <parameter name='plans-index' value='`$plans-index + 1`' />\r
- </set>\r
- </block>\r
- </outcome>\r
- </switch>\r
- </for>\r
- </block>\r
- </for>\r
- </block>\r
- </for>\r
- <set>\r
- <parameter name='eipam-ip-block.plans_length' value='`$plans-index`' />\r
- </set>\r
- <!--EIPAM plug-in needs this attribute set with this name-->\r
- <set>\r
- <parameter name='service-data.service-information.service-type' value='`$service-data.service-information.subscription-service-type`' />\r
- </set>\r
- <switch test='`$plans-index > 0`'>\r
- <outcome value='true'>\r
- <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="assignIPAddress">\r
- <outcome value='failure'>\r
- <return status="failure">\r
- <parameter name="ack-final" value="Y" />\r
- <parameter name="error-code" value="500"/>\r
- <parameter name="error-message" value="An error occured while obtaining new address blocks from EIPAM." />\r
- </return>\r
- </outcome>\r
- </execute>\r
</outcome>\r
</switch>\r
- <set>\r
- <parameter name='plans-index' value='0' />\r
- </set>\r
- <for index='vm-type-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm_length`' >\r
- <for index='network-role-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network_length`' >\r
- <for index='ip-version-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item_length`' >\r
- <switch test='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].use-dhcp`'>\r
- <outcome value='N'>\r
- <block atomic="true">\r
- <for index='ip-index' start='0' end='`$eipam-ip-block.plans[$plans-index].requests_length`' >\r
- <set>\r
- <parameter name='tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-information-items.network-information-item[$ip-version-index].network-ips.network-ip[$ip-index]'\r
- value='`$eipam-ip-block.plans[$plans-index].requests[$ip-index].ip-prefix`' />\r
- </set>\r
- </for>\r
- <set>\r
- <parameter name='plans-index' value='`$plans-index + 1`' />\r
- </set>\r
- </block>\r
- </outcome>\r
- </switch>\r
- </for>\r
- </for>\r
- </for>\r
- <set>\r
- <parameter name='vf-module-object-path'\r
- value="`'restconf/config/GENERIC-RESOURCE-API:services/service/' + $service-data.service-topology.service-topology-identifier.service-instance-id + '/service-data/vnfs/vnf/' + $service-data.vnfs.vnf[$vnf-index].vnf-id + '/vnf-data/vf-modules/vf-module/' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id + '/vf-module-data/vf-module-topology/'`"/>\r
- </set>\r
- <update plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"\r
- resource="vf-module"\r
- key="vf-module.vf-module-id = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id\r
- AND generic-vnf.vnf-id = $service-data.vnfs.vnf[$vnf-index].vnf-id"\r
- force="true" pfx="tmp.AnAI-data">\r
- <parameter name="vf-module-name" value="`$tmp.vf-module-topology.vf-module-topology-identifier.vf-module-name`" />\r
- <parameter name="model-invariant-id" value="`$tmp.vf-module-topology.onap-model-information.model-invariant-uuid`" />\r
- <parameter name="model-version-id" value="`$tmp.vf-module-topology.onap-model-information.model-uuid`" />\r
- <parameter name="model-customization-id" value="`$tmp.vf-module-topology.onap-model-information.model-customization-uuid`" />\r
- <parameter name="selflink" value="`$vf-module-object-path`" />\r
- <outcome value='failure'>\r
- <block atomic="true">\r
- <switch test='`$plans-index > 0`'>\r
- <outcome value='true'>\r
- <block atomic="true">\r
- <set>\r
- <parameter name='tmp.status' value="`'PENDING_DELETE_' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id`" />\r
- </set>\r
- <update plugin="org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource" resource="SQL"\r
- key="UPDATE EIPAM_IP_ASSIGNMENTS set status = $tmp.status WHERE info = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id" >\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error updating EIPAM_IP_ASSIGNMENTS table on rollback" />\r
- </return>\r
- </outcome>\r
- </update>\r
- <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="unassignIPAddress">\r
- <parameter name="deleteEIPAM_status" value="`$tmp.status`" />\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error in EIPAM unassign IP address on rollback" />\r
- </return>\r
- </outcome>\r
- </execute>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error updating vf-module in AAI" />\r
- </return>\r
- </block>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <block atomic="true">\r
- <switch test='`$plans-index > 0`'>\r
- <outcome value='true'>\r
- <block atomic="true">\r
- <set>\r
- <parameter name='tmp.status' value="`'PENDING_DELETE_' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id`" />\r
- </set>\r
- <update plugin="org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource" resource="SQL"\r
- key="UPDATE EIPAM_IP_ASSIGNMENTS set status = $tmp.status WHERE info = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id" >\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error updating EIPAM_IP_ASSIGNMENTS table on rollback" />\r
- </return>\r
- </outcome>\r
- </update>\r
- <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="unassignIPAddress">\r
- <parameter name="deleteEIPAM_status" value="`$tmp.status`" />\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error in EIPAM unassign IP address on rollback" />\r
- </return>\r
- </outcome>\r
- </execute>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No vf-module found in AAI for vf module ID ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id`" />\r
- </return>\r
- </block>\r
- </outcome>\r
- </update>\r
- <for index='vm-type-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm_length`' >\r
- <for index='network-role-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network_length`' >\r
- <save plugin="org.onap.ccsdk.sli.adaptors.aai.AAIService"\r
- resource="vf-module:relationship-list"\r
- key="vf-module.vf-module-id = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id\r
- AND generic-vnf.vnf-id = $service-data.vnfs.vnf[$vnf-index].vnf-id"\r
- force="true" pfx="tmp.AnAI-data">\r
- <parameter name="relationship-list.relationship[0].related-to" value="l3-network" />\r
- <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-key" value="l3-network.network-id" />\r
- <parameter name="relationship-list.relationship[0].relationship-data[0].relationship-value" value="`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-networks.vm-network[$network-role-index].network-id`" />\r
- <outcome value='failure'>\r
- <block atomic="true">\r
- <switch test='`$plans-index > 0`'>\r
- <outcome value='true'>\r
- <block atomic="true">\r
- <set>\r
- <parameter name='tmp.status' value="`'PENDING_DELETE_' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id`" />\r
- </set>\r
- <update plugin="org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource" resource="SQL"\r
- key="UPDATE EIPAM_IP_ASSIGNMENTS set status = $tmp.status WHERE info = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id" >\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error updating EIPAM_IP_ASSIGNMENTS table on rollback" />\r
- </return>\r
- </outcome>\r
- </update>\r
- <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="unassignIPAddress">\r
- <parameter name="deleteEIPAM_status" value="`$tmp.status`" />\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error in EIPAM unassign IP address on rollback" />\r
- </return>\r
- </outcome>\r
- </execute>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error updating vf-module relationships in AAI" />\r
- </return>\r
- </block>\r
- </outcome>\r
- <outcome value='not-found'>\r
- <block atomic="true">\r
- <switch test='`$plans-index > 0`'>\r
- <outcome value='true'>\r
- <block atomic="true">\r
- <set>\r
- <parameter name='tmp.status' value="`'PENDING_DELETE_' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id`" />\r
- </set>\r
- <update plugin="org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource" resource="SQL"\r
- key="UPDATE EIPAM_IP_ASSIGNMENTS set status = $tmp.status WHERE info = $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.vf-module-topology-identifier.vf-module-id" >\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error updating EIPAM_IP_ASSIGNMENTS table on rollback" />\r
- </return>\r
- </outcome>\r
- </update>\r
- <execute plugin="com.att.sdnctl.sli.plugin.eipam.EIPAMPlugin" method="unassignIPAddress">\r
- <parameter name="deleteEIPAM_status" value="`$tmp.status`" />\r
- <outcome value='failure'>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="Error in EIPAM unassign IP address on rollback" />\r
- </return>\r
- </outcome>\r
- </execute>\r
- </block>\r
- </outcome>\r
- </switch>\r
- <return status='failure'>\r
- <parameter name='ack-final' value='Y'/>\r
- <parameter name="error-code" value="500" />\r
- <parameter name="error-message" value="`'No vf-module found in AAI for vf module ID ' + $service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-id`" />\r
- </return>\r
- </block>\r
- </outcome>\r
- </save>\r
- </for>\r
- </for>\r
- <for index='vm-type-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm_length`' >\r
- <for index='vm-index' start='0' end='`$tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-count`' >\r
- <block atomic="true">\r
- <delete plugin='org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource' resource='SQL'\r
- key='DELETE from VIPR_CONFIGURATION WHERE vnf_id = $service-data.vnfs.vnf[$vnf-index].vnf-id\r
- AND ecomp_service_instance_id = $service-data.service-information.service-instance-id\r
- AND vm_name = $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vm-name[$vm-index]' >\r
- <outcome value='failure'>\r
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log"/>\r
- <parameter name="field1" value="__TIMESTAMP__"/>\r
- <parameter name="field2" value="GENERIC-RESOURCE-API.vf-module-topology-operation-assign:REQID"/>\r
- <parameter name="field3" value="`$vf-module-topology-operation-input.sdnc-request-header.svc-request-id`"/>\r
- <parameter name="field4" value="Failed to insert VIPR_CONFIGURATION record"/>\r
- </record>\r
- </outcome>\r
- </delete>\r
- <save plugin="org.onap.ccsdk.sli.adaptors.resource.sql.SqlResource" resource="SQL"\r
- key="INSERT INTO VIPR_CONFIGURATION (vnf_id, vnf_name, ecomp_service_instance_id, vm_name, cloud_region_id, cloud_owner) VALUES ( $service-data.vnfs.vnf[$vnf-index].vnf-id , $service-data.vnfs.vnf[$vnf-index].vnf-data.vnf-topology.vnf-topology-identifier-structure.vnf-name , $service-data.service-information.service-instance-id , $tmp.vf-module-topology.vf-module-assignments.vms.vm[$vm-type-index].vm-names.vm-name[$vm-index] , $tmp.vf-module-topology.aic-cloud-region , 'CloudOwner')" >\r
- <outcome value='failure'>\r
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">\r
- <parameter name="logger" value="message-log"/>\r
- <parameter name="field1" value="__TIMESTAMP__"/>\r
- <parameter name="field2" value="GENERIC-RESOURCE-API.vf-module-topology-operation-assign:REQID"/>\r
- <parameter name="field3" value="`$vf-module-topology-operation-input.sdnc-request-header.svc-request-id`"/>\r
- <parameter name="field4" value="Failed to insert VIPR_CONFIGURATION record"/>\r
- </record>\r
- </outcome>\r
- </save>\r
- </block>\r
- </for>\r
- </for>\r
- <set>\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-topology.' value='$tmp.vf-module-topology.' />\r
- </set>\r
- <set>\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.sdnc-request-header.'\r
- value='$vf-module-topology-operation-input.sdnc-request-header.' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.request-information.'\r
- value='$vf-module-topology-operation-input.request-information.' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.service-information.'\r
- value='$vf-module-topology-operation-input.service-information.' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vnf-information.'\r
- value='$vf-module-topology-operation-input.vnf-information.' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-information.'\r
- value='$vf-module-topology-operation-input.vf-module-information.' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-request-input.'\r
- value='$vf-module-topology-operation-input.vf-module-request-input.' />\r
- </set>\r
- <call module='GENERIC-RESOURCE-API' rpc='gw-vfmodule-update' mode='sync' ></call>\r
- <set>\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.order-status'\r
- value='PendingCreate' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.last-rpc-action'\r
- value='`$vf-module-topology-operation-input.sdnc-request-header.svc-action`' />\r
- <parameter name='service-data.vnfs.vnf[$vnf-index].vnf-data.vf-modules.vf-module[$vf-module-index].vf-module-data.vf-module-level-oper-status.last-action'\r
- value='`$vf-module-topology-operation-input.sdnc-request-header.request-action`' />\r
- </set>\r
- <return status='success'>\r
- <parameter name="ack-final-indicator" value="Y" />\r
- <parameter name="error-code" value="200" />\r
- <parameter name="error-message" value="`$error-message`" />\r
- </return>\r
</block>\r
</method>\r
</service-logic>
\ No newline at end of file
Code Review / sdnc / oam.git / blobdiff