#!/bin/bash
# Place the scripts in run order:
source ${SCRIPTS}/common_functions.sh
-
-CSIT=TRUE
-if [ ${CSIT} = "TRUE" ] ; then
-####################################################
-#Executes the below setup in an Docker Environment #
-####################################################
-
-echo "CSIT Test get executed in here"
SFTP_PORT=22
VESC_PORT=8080
export VESC_PORT=${VESC_PORT}
mkdir docker-compose
cd $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources/docker-compose
cp $WORKSPACE/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources/docker-compose/docker-compose.yml
-cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/docker-databus-controller.conf /tmp/
-sed -i 's/DMAAPMR/'$DMAAP_MR_IP'/g' /tmp/docker-databus-controller.conf
docker login -u docker -p docker nexus3.onap.org:10001
docker-compose up -d
echo "Disregard the message ERROR: for datarouter-node Container 1234456 is unhealthy, this is expected behaiour at this stage"
-docker kill datarouter-prov
-docker kill datarouter-node
docker kill vescollector
docker kill cbs
+sleep 10
CONSUL_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' consul )
sed -i -e '/CONSUL_HOST:/ s/:.*/: '$CONSUL_IP'/' docker-compose.yml
-HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
-sed -i -e '/DMAAPHOST:/ s/:.*/: '$HOST_IP'/' docker-compose.yml
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $7}')
+DMAAP_MR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $DMAAP)
+sed -i -e '/DMAAPHOST:/ s/:.*/: '$DMAAP_MR_IP'/' docker-compose.yml
MARIADB=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' mariadb )
sed -i 's/datarouter-mariadb/'$MARIADB'/g' $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources/prov_data/provserver.properties
docker-compose up -d
+sleep 5
+# Get IP address of datarrouger-prov, datarouter-node, fileconsumer-node.
+DR_PROV_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-prov)
+DR_NODE_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-node)
+DR_SUBSCIBER_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' fileconsumer-node)
+DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
+
+echo DR_PROV_IP=${DR_PROV_IP}
+echo DR_NODE_IP=${DR_NODE_IP}
+echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
+echo DR_SUBSCIBER_IP=${DR_SUBSCIBER_IP}
+
+docker kill datarouter-node
+docker kill datarouter-prov
+sed -i 's/1.1.1.1/'$DR_NODE_IP'/g' docker-compose.yml
+sed -i 's/2.2.2.2/'$DR_PROV_IP'/g' docker-compose.yml
+docker-compose up -d
# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb
for i in {1..10}; do
done
sleep 5
-# Get IP address of datarrouger-prov, datarouter-node, fileconsumer-node.
-DR_PROV_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-prov)
-DR_NODE_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-node)
-DR_SUBSCIBER_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' fileconsumer-node)
-DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
-
-echo DR_PROV_IP=${DR_PROV_IP}
-echo DR_NODE_IP=${DR_NODE_IP}
-echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
-echo DR_SUBSCIBER_IP=${DR_SUBSCIBER_IP}
docker exec -i datarouter-prov sh -c "curl -k -X PUT https://$DR_PROV_IP:8443/internal/api/NODES?val=dmaap-dr-node\|$DR_GATEWAY_IP"
docker exec -i datarouter-prov sh -c "curl -k -X PUT https://$DR_PROV_IP:8443/internal/api/PROV_AUTH_ADDRESSES?val=dmaap-dr-prov\|$DR_GATEWAY_IP"
-docker exec datarouter-prov /bin/sh -c "echo '${DR_NODE_IP}' dmaap-dr-node >> /etc/hosts"
-docker exec datarouter-node /bin/sh -c "echo '${DR_PROV_IP}' dmaap-dr-prov >> /etc/hosts"
docker exec datarouter-node /bin/sh -c "echo '${DR_SUBSCIBER_IP}' dmaap-dr-subscriber >> /etc/hosts"
+
# Get IP address of DMAAP, KAFKA, Zookeeper
DMAAP_MR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $DMAAP)
KAFKA_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $KAFKA)
export HOST_IP=${HOST_IP}
export DMAAP_MR_IP=${DMAAP_MR_IP}
-docker kill buscontroller
-sed -i 's/DMAAPDR/'$DR_PROV_IP'/g' docker-compose.yml
-sed -i 's/DMAAPMR/'$DMAAP_MR_IP'/g' docker-compose.yml
-docker-compose up -d
-sed -i 's/DMAAPDR/'$DR_PROV_IP'/g' /tmp/docker-databus-controller.conf
# Data File Collector configuration :
-sed -i 's/DR_NODE_IP/'$DR_NODE_IP'/g' docker-compose.yml
+sed -i 's/5.5.5.5/'$DR_NODE_IP'/g' docker-compose.yml
cp $WORKSPACE/plans/usecases/5G-bulkpm/assets/datafile_endpoints.json /tmp/
sed -i 's/dmaapmrhost/'${DMAAP_MR_IP}'/g' /tmp/datafile_endpoints.json
sed -i 's/dmaapdrhost/'${DR_PROV_IP}'/g' /tmp/datafile_endpoints.json
echo data_endpoints.json from DFC containter
cat /tmp/datafile_endpoints.json.fromcontainer
docker cp /tmp/datafile_endpoints.json dfc:/opt/app/datafile/config/
+docker cp $WORKSPACE/plans/usecases/5G-bulkpm/assets/application.yaml dfc:/opt/app/datafile/config/
#Increase Logging
-docker exec dfc /bin/sh -c " sed -i 's/org.onap.dcaegen2.collectors.datafile: WARN/org.onap.dcaegen2.collectors.datafile: TRACE/g' /opt/app/datafile/config/application.yaml"
+#docker exec dfc /bin/sh -c " sed -i 's/org.onap.dcaegen2.collectors.datafile: WARN/org.onap.dcaegen2.collectors.datafile: TRACE/g' /opt/app/datafile/config/application.yaml"
docker restart dfc
sleep 2
-# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb, Consul, CBS, Buscontroller
+# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb, Consul, CBS
for i in {1..10}; do
if [ $(docker inspect --format '{{ .State.Running }}' consul) ] && \
- [ $(docker inspect --format '{{ .State.Running }}' cbs) ] && \
- [ $(docker inspect --format '{{ .State.Running }}' buscontroller) ]
+ [ $(docker inspect --format '{{ .State.Running }}' cbs) ]
then
- echo "Data Router, Consul, Config Binding Service, Buscontroller Services Running"
+ echo "Data Router, Consul, Config Binding Service Services Running"
break
else
echo sleep $i
done
sleep 10
-#Pass any variables required by Robot test suites in ROBOT_VARIABLES
-ROBOT_VARIABLES="-v DR_PROV_IP:${DR_PROV_IP} -v DR_NODE_IP:${DR_NODE_IP} -v DMAAP_MR_IP:${DMAAP_MR_IP} -v VESC_IP:${VESC_IP} -v VESC_PORT:${VESC_PORT} -v DR_SUBSCIBER_IP:${DR_SUBSCIBER_IP} -v SFTP_IP:${SFTP_IP}"
-
pip install jsonschema uuid simplejson
# Wait container ready
sleep 2
sed -i 's/sftpserver/'${SFTP_IP}'/g' $WORKSPACE/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotificationUpdated.json
sed -i 's/sftpport/'${SFTP_PORT}'/g' $WORKSPACE/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotificationUpdated.json
docker cp $WORKSPACE/plans/usecases/5G-bulkpm/assets/xNF.pm.xml.gz sftp:/home/admin/
+docker cp $WORKSPACE/tests/dcaegen2-pmmapper/pmmapper/assets/A20181002.0000-1000-0015-1000_5G.xml.gz sftp:/home/admin/
# Data Router Configuration:
# Create default feed and create file consumer subscriber on data router
sleep 10
curl -k https://$DR_PROV_IP:8443/internal/prov
-else
-############################################################
-############################################################
-# Executes the below setup in an ONAP Environment #
-# Make sure the steps in the README are completed first !! #
-############################################################
-############################################################
-SFTP_PORT=2222
-
-cp $WORKSPACE/plans/usecases/5G-bulkpm/teardown.sh $WORKSPACE/plans/usecases/5G-bulkpm/teardown.sh.orig
-cp $WORKSPACE/plans/usecases/5G-bulkpm/onap.teardown.sh $WORKSPACE/plans/usecases/5G-bulkpm/teardown.sh
-
-#Get DataFileCollector POD name in this ONAP Deployment
-DFC_POD=$(kubectl -n onap get pods | grep datafile-collector | awk '{print $1}')
-export DFC_POD=${DFC_POD}
-export CLI_EXEC_CLI_DFC="kubectl exec -n onap ${DFC_POD} -it ls /target | grep .gz"
-
-# Get IP address of datarrouter-prov
-DR_PROV_IP=$(kubectl -n onap -o wide get pods | grep dmaap-dr-prov | awk '{print $6}')
-echo DR_PROV_IP=${DR_PROV_IP}
-DR_NODE_IP=$(kubectl -n onap -o=wide get pods | grep dmaap-dr-node | awk '{print $6}')
-echo DR_NODE_IP=${DR_NODE_IP}
-
-# Get IP address of exposed Ves and its port
-DMAAP_MR_IP=$(kubectl -n onap -o=wide get pods | grep dev-dmaap-message-router | grep -Ev "kafka|zookeeper" | awk '{print $6}')
-VESC_IP=$(kubectl get svc -n onap | grep vesc | awk '{print $4}')
-VESC_PORT=$(kubectl get svc -n onap | grep vesc | awk '{print $5}' | cut -d ":" -f2 | cut -d "/" -f1)
-echo VESC_IP=${VESC_IP}
-echo VESC_PORT=${VESC_PORT}
-
-export VESC_IP=${VESC_IP}
-export VESC_PORT=${VESC_PORT}
-export HOST_IP=${HOST_IP}
-export DMAAP_MR_IP=${DMAAP_MR_IP}
-
-#Get DataFileCollector POD name in this ONAP Deployment
-DFC_POD=$(kubectl -n onap get pods | grep datafile-collector | awk '{print $1}')
-export DFC_POD=${DFC_POD}
-
-pip install jsonschema uuid simplejson
+# Consul Configuration for PM Mapper
+cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/cbs.json /tmp/cbs.json
+sed -i 's/ipaddress/'${CBS_IP}'/g' /tmp/cbs.json
+curl --request PUT --data @/tmp/cbs.json http://$CONSUL_IP:8500/v1/agent/service/register
+curl 'http://'$CONSUL_IP':8500/v1/kv/pmmapper?dc=dc1' -X PUT -H 'Accept: application/json' -H 'Content-Type: application/json' -H 'X-Requested-With: XMLHttpRequest' --data @$WORKSPACE/plans/usecases/5G-bulkpm/assets/config.json
+
+# PM Mapper startup and configuration
+mkdir /tmp/docker-compose
+cd /tmp/docker-compose
+cp $WORKSPACE/plans/usecases/5G-bulkpm/composefile/docker-compose-pmmapper.yml /tmp/docker-compose/docker-compose.yml
+CBS_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' cbs)
+sed -i 's/CBSIP/'$CBS_IP'/g' docker-compose.yml
+sed -i 's/1.1.1.1/'$DR_NODE_IP'/g' docker-compose.yml
+sed -i 's/4.4.4.4/'$MARIADB'/g' docker-compose.yml
+docker-compose up -d
-# Clone DMaaP Data Router repo
-mkdir -p $WORKSPACE/archives/dmaapdr
-cd $WORKSPACE/archives/dmaapdr
-git clone --depth 1 https://gerrit.onap.org/r/dmaap/datarouter -b master
-cd $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources
-mkdir docker-compose
cd $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources/docker-compose
-cp $WORKSPACE/plans/usecases/5G-bulkpm/composefile/onap.docker-compose-e2e $WORKSPACE/archives/dmaapdr/datarouter/datarouter-docker-compose/src/main/resources/docker-compose/docker-compose.yml
-
-#Statup the SFTP and FileConsumer containers.
-docker login -u docker -p docker nexus3.onap.org:10001
+PMMAPPER_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' pmmapper)
+docker kill datarouter-node
+docker kill datarouter-prov
+sed -i 's/1.1.1.1/'$DR_NODE_IP'/g' docker-compose.yml
+sed -i 's/2.2.2.2/'$DR_PROV_IP'/g' docker-compose.yml
+sed -i 's/3.3.3.3/'$PMMAPPER_IP'/g' docker-compose.yml
docker-compose up -d
-# Wait container ready
+# Setting up PM Mapper certs.
+docker cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/cert.jks pmmapper:opt/app/pm-mapper/etc/
+docker cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/jks.pass pmmapper:opt/app/pm-mapper/etc/
+docker cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/trust.jks pmmapper:opt/app/pm-mapper/etc/
+docker cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/trust.pass pmmapper:opt/app/pm-mapper/etc/
+docker restart pmmapper
+sleep 5
+
+# Simulation setup for Message Router
+docker cp $WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/mrserver.js mariadb:/
+docker exec mariadb /bin/bash -c "apt update"
sleep 2
-HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
-# SFTP Configuration:
-# Update the File Ready Notification with actual sftp ip address and copy pm files to sftp server.
-cp $WORKSPACE/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotification.json $WORKSPACE/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotificationUpdated.json
-sed -i 's/sftpserver/'${HOST_IP}'/g' $WORKSPACE/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotificationUpdated.json
-sed -i 's/sftpport/'${SFTP_PORT}'/g' $WORKSPACE/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotificationUpdated.json
-docker cp $WORKSPACE/plans/usecases/5G-bulkpm/assets/xNF.pm.xml.gz sftp:/home/admin/
+docker exec mariadb /bin/bash -c "apt install nodejs -y"
+sleep 10
+docker exec mariadb /bin/bash -c "nodejs mrserver.js &" &
-# Create default feed and create file consumer subscriber on data router
-curl -v -X POST -H "Content-Type:application/vnd.dmaap-dr.feed" -H "X-DMAAP-DR-ON-BEHALF-OF:dradmin" --data-ascii @$WORKSPACE/plans/usecases/5G-bulkpm/assets/createFeed.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443
-cp $WORKSPACE/plans/usecases/5G-bulkpm/assets/addSubscriber.json /tmp/addSubscriber.json
-sed -i 's/fileconsumer/'${HOST_IP}'/g' /tmp/addSubscriber.json
-curl -v -X POST -H "Content-Type:application/vnd.dmaap-dr.subscription" -H "X-DMAAP-DR-ON-BEHALF-OF:dradmin" --data-ascii @/tmp/addSubscriber.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443/subscribe/1
+# Create PM Mapper feed and create PM Mapper subscriber on data router
+#curl -v -X POST -H "Content-Type:application/vnd.dmaap-dr.feed" -H "X-DMAAP-DR-ON-BEHALF-OF:pmmapper" --data-ascii @$WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/createFeed.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443
+curl -v -X POST -H "Content-Type:application/vnd.dmaap-dr.subscription" -H "X-DMAAP-DR-ON-BEHALF-OF:pmmapper" --data-ascii @$WORKSPACE/plans/dcaegen2-pmmapper/pmmapper/assets/addSubscriber.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443/subscribe/1
+
+# Create PM Mapper tocic in Message Router
+PMMAPPER_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' pmmapper)
+docker exec pmmapper /bin/sh -c "cat /var/log/ONAP/dcaegen2/services/pm-mapper/pm-mapper_output.log" > /tmp/pmmapper.log
+cat /tmp/pmmapper.log
+docker exec -it datarouter-prov sh -c "curl http://dmaap-dr-node:8080/internal/fetchProv"
sleep 10
curl -k https://$DR_PROV_IP:8443/internal/prov
#Pass any variables required by Robot test suites in ROBOT_VARIABLES
-ROBOT_VARIABLES="-v DR_PROV_IP:${DR_PROV_IP} -v DR_NODE_IP:${DR_NODE_IP} -v DMAAP_MR_IP:${DMAAP_MR_IP} -v VESC_IP:${VESC_IP} -v VESC_PORT:${VESC_PORT} -v DR_SUBSCIBER_IP:${DR_SUBSCIBER_IP} -v DFC_POD:${DFC_POD} -v HOST_IP:${HOST_IP} "
-
-fi;
\ No newline at end of file
+ROBOT_VARIABLES="-v DR_PROV_IP:${DR_PROV_IP} -v DR_NODE_IP:${DR_NODE_IP} -v DMAAP_MR_IP:${DMAAP_MR_IP} -v VESC_IP:${VESC_IP} -v VESC_PORT:${VESC_PORT} -v DR_SUBSCIBER_IP:${DR_SUBSCIBER_IP} -v SFTP_IP:${SFTP_IP}"
\ No newline at end of file
Code Review / integration / csit.git / blobdiff