+++ /dev/null
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-tosca_definitions_version: tosca_simple_yaml_1_1
-imports:
-- data.yml
-policy_types:
- tosca.policies.Root:
- description: The TOSCA Policy Type all other TOSCA Policy Types derive from
- tosca.policies.Placement:
- derived_from: tosca.policies.Root
- description: The TOSCA Policy Type definition that is used to govern placement of TOSCA nodes or groups of nodes.
- tosca.policies.Scaling:
- derived_from: tosca.policies.Root
- description: The TOSCA Policy Type definition that is used to govern scaling of TOSCA nodes or groups of nodes.
- tosca.policies.Update:
- derived_from: tosca.policies.Root
- description: The TOSCA Policy Type definition that is used to govern update of TOSCA nodes or groups of nodes.
- tosca.policies.Performance:
- derived_from: tosca.policies.Root
- description: The TOSCA Policy Type definition that is used to declare performance requirements for TOSCA nodes or groups of nodes.
- org.openecomp.policies.placement.Antilocate:
- derived_from: tosca.policies.Placement
- description: My placement policy for separation based upon container type value
- properties:
- name:
- type: string
- description: The name of the policy
- required: false
- status: SUPPORTED
- container_type:
- type: string
- description: container type
- required: false
- status: SUPPORTED
- constraints:
- - valid_values:
- - host
- - region
- - compute
- org.openecomp.policies.placement.Colocate:
- derived_from: tosca.policies.Placement
- description: Keep associated nodes (groups of nodes) based upon affinity value
- properties:
- name:
- type: string
- description: The name of the policy
- required: false
- status: SUPPORTED
- affinity:
- type: string
- description: affinity
- required: true
- status: SUPPORTED
- constraints:
- - valid_values:
- - host
- - region
- - compute
- org.openecomp.policies.placement.valet.Diversity:
- derived_from: tosca.policies.Placement
- description: Valet Diversity
- properties:
- level:
- type: string
- description: diversity
- required: false
- default: host
- status: SUPPORTED
- constraints:
- - valid_values:
- - host
- - rack
- org.openecomp.policies.placement.valet.Exclusivity:
- derived_from: tosca.policies.Placement
- description: Valet Exclusivity
- properties:
- level:
- type: string
- description: exclusivity
- required: false
- default: host
- status: SUPPORTED
- constraints:
- - valid_values:
- - host
- - rack
- org.openecomp.policies.placement.valet.Affinity:
- derived_from: tosca.policies.Placement
- description: Valet Affinity
- properties:
- level:
- type: string
- description: affinity
- required: false
- default: host
- status: SUPPORTED
- constraints:
- - valid_values:
- - host
- - rack
- org.openecomp.policies.scaling.Fixed:
- derived_from: tosca.policies.Scaling
- properties:
- quantity:
- description: the exact number of instances to keep up
- type: integer
- required: true
- org.openecomp.policies.External:
- derived_from: tosca.policies.Root
- description: externally managed policy (for example, type="network assignment", source="Policy Manager", name="route target")
- properties:
- source:
- type: string
- description: The name of the server that exposes the policy with predefined type and name.
- required: false
- type:
- type: string
- description: The type (category) of the policy same as it is defined in the source.
- required: false
- name:
- type: string
- description: The name of the policy, that related to specific type, same as it is defined in the source.
- required: false
- onap.policies.Monitoring:
- derived_from: tosca.policies.Root
- description: A base policy type for all policies that governs monitoring provisioning
- onap.policies.monitoring.cdap.tca.hi.lo.app:
- derived_from: onap.policies.Monitoring
- version: 1.0.0
- properties:
- tca_policy:
- type: map
- description: TCA Policy JSON
- entry_schema:
- type: onap.datatypes.monitoring.tca_policy
- tosca.policies.nfv.InstantiationLevels:
- derived_from: tosca.policies.Root
- description: The InstantiationLevels type is a policy type representing all the instantiation levels of resources to be instantiated within a deployment flavour and including default instantiation level in term of the number of VNFC instances to be created as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- levels:
- type: map
- description: Describes the various levels of resources that can be used to instantiate the VNF using this flavour.
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.InstantiationLevel
- default_level:
- type: string
- description: The default instantiation level for this flavour.
- required: false
- tosca.policies.nfv.VduInstantiationLevels:
- derived_from: tosca.policies.Root
- description: The VduInstantiationLevels type is a policy type representing all the instantiation levels of resources to be instantiated within a deployment flavour in term of the number of VNFC instances to be created from each vdu.Compute. as defined in ETSI GS NFV-IFA 011 [1]
- properties:
- levels:
- type: map
- description: Describes the Vdu.Compute levels of resources that can be used to instantiate the VNF using this flavour
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.VduLevel
- targets:
- - tosca.nodes.nfv.Vdu.Compute
- tosca.policies.nfv.VirtualLinkInstantiationLevels:
- derived_from: tosca.policies.Root
- description: The VirtualLinkInstantiationLevels type is a policy type representing all the instantiation levels of virtual link resources to be instantiated within a deployment flavour as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- levels:
- type: map
- description: Describes the virtual link levels of resources that can be used to instantiate the VNF using this flavour.
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
- targets:
- - tosca.nodes.nfv.VnfVirtualLink
- tosca.policies.nfv.ScalingAspects:
- derived_from: tosca.policies.Root
- description: The ScalingAspects type is a policy type representing the scaling aspects used for horizontal scaling as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- aspects:
- type: map
- description: Describe maximum scale level for total number of scaling steps that can be applied to a particular aspect
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.ScalingAspect
- tosca.policies.nfv.VduScalingAspectDeltas:
- derived_from: tosca.policies.Root
- description: The VduScalingAspectDeltas type is a policy type representing the Vdu.Compute detail of an aspect deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- aspect:
- type: string
- description: Represents the scaling aspect to which this policy applies
- required: true
- deltas:
- type: map
- description: Describes the Vdu.Compute scaling deltas to be applied for every scaling steps of a particular aspect.
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.VduLevel
- targets:
- - tosca.nodes.nfv.Vdu.Compute
- tosca.policies.nfv.VirtualLinkBitrateScalingAspectDeltas:
- derived_from: tosca.policies.Root
- description: The VirtualLinkBitrateScalingAspectDeltas type is a policy type representing the VnfVirtualLink detail of an aspect deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- aspect:
- type: string
- description: Represents the scaling aspect to which this policy applies.
- required: true
- deltas:
- type: map
- description: Describes the VnfVirtualLink scaling deltas to be applied for every scaling steps of a particular aspect.
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
- targets:
- - tosca.nodes.nfv.VnfVirtualLink
- tosca.policies.nfv.VduInitialDelta:
- derived_from: tosca.policies.Root
- description: The VduInitialDelta type is a policy type representing the Vdu.Compute detail of an initial delta used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- initial_delta:
- type: tosca.datatypes.nfv.VduLevel
- description: Represents the initial minimum size of the VNF.
- required: true
- targets:
- - tosca.nodes.nfv.Vdu.Compute
- tosca.policies.nfv.VirtualLinkBitrateInitialDelta:
- derived_from: tosca.policies.Root
- description: The VirtualLinkBitrateInitialDelta type is a policy type representing the VnfVirtualLink detail of an initial deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- initial_delta:
- type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
- description: Represents the initial minimum size of the VNF.
- required: true
- targets:
- - tosca.nodes.nfv.VnfVirtualLink
- tosca.policies.nfv.SecurityGroupRule:
- derived_from: tosca.policies.Root
- description: The SecurityGroupRule type is a policy type specified the matching criteria for the ingress and/or egress traffic to/from visited connection points as defined in ETSI GS NFV-IFA 011 [1].
- properties:
- description:
- type: string
- description: Human readable description of the security group rule.
- required: false
- direction:
- type: string
- description: The direction in which the security group rule is applied. The direction of 'ingress' or 'egress' is specified against the associated CP. I.e., 'ingress' means the packets entering a CP, while 'egress' means the packets sent out of a CP.
- required: false
- constraints:
- - valid_values:
- - ingress
- - egress
- default: ingress
- ether_type:
- type: string
- description: Indicates the protocol carried over the Ethernet layer.
- required: false
- constraints:
- - valid_values:
- - ipv4
- - ipv6
- default: ipv4
- protocol:
- type: string
- description: Indicates the protocol carried over the IP layer. Permitted values include any protocol defined in the IANA protocol registry, e.g. TCP, UDP, ICMP, etc.
- required: false
- constraints:
- - valid_values:
- - hopopt
- - icmp
- - igmp
- - ggp
- - ipv4
- - st
- - tcp
- - cbt
- - egp
- - igp
- - bbn_rcc_mon
- - nvp_ii
- - pup
- - argus
- - emcon
- - xnet
- - chaos
- - udp
- - mux
- - dcn_meas
- - hmp
- - prm
- - xns_idp
- - trunk_1
- - trunk_2
- - leaf_1
- - leaf_2
- - rdp
- - irtp
- - iso_tp4
- - netblt
- - mfe_nsp
- - merit_inp
- - dccp
- - 3pc
- - idpr
- - xtp
- - ddp
- - idpr_cmtp
- - tp++
- - il
- - ipv6
- - sdrp
- - ipv6_route
- - ipv6_frag
- - idrp
- - rsvp
- - gre
- - dsr
- - bna
- - esp
- - ah
- - i_nlsp
- - swipe
- - narp
- - mobile
- - tlsp
- - skip
- - ipv6_icmp
- - ipv6_no_nxt
- - ipv6_opts
- - cftp
- - sat_expak
- - kryptolan
- - rvd
- - ippc
- - sat_mon
- - visa
- - ipcv
- - cpnx
- - cphb
- - wsn
- - pvp
- - br_sat_mon
- - sun_nd
- - wb_mon
- - wb_expak
- - iso_ip
- - vmtp
- - secure_vmtp
- - vines
- - ttp
- - iptm
- - nsfnet_igp
- - dgp
- - tcf
- - eigrp
- - ospfigp
- - sprite_rpc
- - larp
- - mtp
- - ax.25
- - ipip
- - micp
- - scc_sp
- - etherip
- - encap
- - gmtp
- - ifmp
- - pnni
- - pim
- - aris
- - scps
- - qnx
- - a/n
- - ip_comp
- - snp
- - compaq_peer
- - ipx_in_ip
- - vrrp
- - pgm
- - l2tp
- - ddx
- - iatp
- - stp
- - srp
- - uti
- - smp
- - sm
- - ptp
- - isis
- - fire
- - crtp
- - crudp
- - sscopmce
- - iplt
- - sps
- - pipe
- - sctp
- - fc
- - rsvp_e2e_ignore
- - mobility
- - udp_lite
- - mpls_in_ip
- - manet
- - hip
- - shim6
- - wesp
- - rohc
- default: tcp
- port_range_min:
- type: integer
- description: Indicates minimum port number in the range that is matched by the security group rule. If a value is provided at design-time, this value may be overridden at run-time based on other deployment requirements or constraints.
- required: false
- constraints:
- - greater_or_equal: 0
- - less_or_equal: 65535
- default: 0
- port_range_max:
- type: integer
- description: Indicates maximum port number in the range that is matched by the security group rule. If a value is provided at design-time, this value may be overridden at run-time based on other deployment requirements or constraints.
- required: false
- constraints:
- - greater_or_equal: 0
- - less_or_equal: 65535
- default: 65535
- targets:
- - tosca.nodes.nfv.VduCp
- - tosca.nodes.nfv.VnfExtCp
- tosca.policies.nfv.SupportedVnfInterface:
- derived_from: tosca.policies.Root
- description: this policy type represents interfaces produced by a VNF, the details to access them and the applicable connection points to use to access these interfaces
- properties:
- interface_name:
- type: string
- description: Identifies an interface produced by the VNF.
- required: true
- constraints:
- - valid_values:
- - vnf_indicator
- - vnf_configuration
- details:
- type: tosca.datatypes.nfv.InterfaceDetails
- description: Provide additional data to access the interface endpoint
- required: false
- targets:
- - tosca.nodes.nfv.VnfExtCp
- - tosca.nodes.nfv.VduCp
- tosca.policies.nfv.AffinityRule:
- derived_from: tosca.policies.Placement
- description: The AffinityRule describes the affinity rules applicable for the defined targets
- properties:
- scope:
- type: string
- description: scope of the rule is an NFVI_node, an NFVI_PoP, etc.
- required: true
- constraints:
- - valid_values:
- - nfvi_node
- - zone
- - zone_group
- - nfvi_pop
- targets:
- - tosca.nodes.nfv.Vdu.Compute
- - tosca.nodes.nfv.VnfVirtualLink
- - tosca.groups.nfv.PlacementGroup
- tosca.policies.nfv.AntiAffinityRule:
- derived_from: tosca.policies.Placement
- description: The AntiAffinityRule describes the anti-affinity rules applicable for the defined targets
- properties:
- scope:
- type: string
- description: scope of the rule is an NFVI_node, an NFVI_PoP, etc.
- required: true
- constraints:
- - valid_values:
- - nfvi_node
- - zone
- - zone_group
- - nfvi_pop
- targets:
- - tosca.nodes.nfv.Vdu.Compute
- - tosca.nodes.nfv.VnfVirtualLink
- - tosca.groups.nfv.PlacementGroup
Code Review / integration / csit.git / blobdiff