-#!/bin/bash
+#!/bin/sh
+
# Copyright (C) 2018 Amdocs, Bell Canada
# Modifications Copyright (C) 2019 Samsung
# Modifications Copyright (C) 2020 Nokia
#
usage ()
{
- echo "Usage: demo-k8s.sh <namespace> <command> [<parameters>] [execscript]"
- echo " "
- echo " demo-k8s.sh <namespace> init"
- echo " - Execute both init_customer + distribute"
- echo " "
- echo " demo-k8s.sh <namespace> init_customer"
- echo " - Create demo customer (Demonstration) and services, etc."
- echo " "
- echo " demo-k8s.sh <namespace> distribute [<prefix>]"
- echo " - Distribute demo models (demoVFW and demoVLB)"
- echo " "
- echo " demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
- echo " - Preload data for VNF for the <module_name>"
- echo " "
- echo " demo-k8s.sh <namespace> appc <module_name>"
- echo " - provide APPC with vFW module mount point for closed loop"
- echo " "
- echo " demo-k8s.sh <namespace> init_robot [ <etc_hosts_prefix> ]"
- echo " - Initialize robot after all ONAP VMs have started"
- echo " "
- echo " demo-k8s.sh <namespace> instantiateVFW"
- echo " - Instantiate vFW module for the demo customer (DemoCust<uuid>)"
- echo " "
- echo " demo-k8s.sh <namespace> instantiateVFWdirectso csar_filename"
- echo " - Instantiate vFW module using direct SO interface using previously distributed model "
- echo " that is in /tmp/csar in robot container"
- echo " "
- echo " demo-k8s.sh <namespace> instantiateVLB_CDS"
- echo " - Instantiate vLB module using CDS with a preloaded CBA "
- echo " "
- echo " demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
- echo " - Delete the module created by instantiateVFW"
- echo " "
- echo " demo-k8s.sh <namespace> vfwclosedloop <pgn-ip-address>"
- echo " - vFWCL: Sets the packet generator to high and low rates, and checks whether the policy "
- echo " kicks in to modulate the rates back to medium"
- echo " "
- echo " demo-k8s.sh <namespace> <command> [<parameters>] execscript"
- echo " - Optional parameter to execute user custom scripts located in scripts/demoscript directory"
- echo " "
+ echo "Usage: demo-k8s.sh <namespace> <command> [<parameters>] [execscript]"
+ echo " "
+ echo " demo-k8s.sh <namespace> init"
+ echo " - Execute both init_customer + distribute + registrySynch"
+ echo " "
+ echo " demo-k8s.sh <namespace> init_customer"
+ echo " - Create demo customer (Demonstration) and services, etc."
+ echo " "
+ echo " demo-k8s.sh <namespace> registrySynch [ repo <chart name> | path [ <path to helm charts> ]"
+ echo " [ <chart prefix> ] ]"
+ echo " - Synchronize chart museum inside of onap k8s cluster with"
+ echo " onap helm charts git repository (OOM)"
+ echo " By default following charts are synchronized:"
+ echo " - oom/kubernetes/dcaegen2-services/charts/,"
+ echo " - oom/kubernetes/common/common/charts,"
+ echo " - oom/kubernetes/common/postgres/charts/,"
+ echo " - oom/kubernetes/common/repositoryGenerator/charts/,"
+ echo " - oom/kubernetes/common/readinessCheck/charts/,"
+ echo " User is able also to synchronize custom helm charts by providing"
+ echo " flag 'path' and path to charts into command and chart name/s prefix for example:"
+ echo " demo-k8s.sh onap registrySynch /home/ubuntu/oom/kubernetes/common/postgres/charts/ postgres"
+ echo " - Synchronize chart museum inside of onap k8s cluster with"
+ echo " onap installation server 'local' helm charts repository"
+ echo " By default following charts are synchronized:"
+ echo " - local/certInitializer"
+ echo " User is able also to synchronize custom helm charts by providing"
+ echo " flag 'repo' and chart name in 'local' repo into command for example:"
+ echo " demo-k8s.sh onap registrySynch repo certInitializer"
+ echo " "
+ echo " demo-k8s.sh <namespace> distribute [<prefix>]"
+ echo " - Distribute demo models (demoVFW and demoVLB)"
+ echo " "
+ echo " demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
+ echo " - Preload data for VNF for the <module_name>"
+ echo " "
+ echo " demo-k8s.sh <namespace> appc <module_name>"
+ echo " - provide APPC with vFW module mount point for closed loop"
+ echo " "
+ echo " demo-k8s.sh <namespace> init_robot [ <etc_hosts_prefix> ]"
+ echo " - Initialize robot after all ONAP VMs have started"
+ echo " "
+ echo " demo-k8s.sh <namespace> instantiateVFW"
+ echo " - Instantiate vFW module for the demo customer (DemoCust<uuid>)"
+ echo " "
+ echo " demo-k8s.sh <namespace> instantiateVFWdirectso csar_filename"
+ echo " - Instantiate vFW module using direct SO interface using previously distributed model "
+ echo " that is in /tmp/csar in robot container"
+ echo " "
+ echo " demo-k8s.sh <namespace> instantiateVLB_CDS"
+ echo " - Instantiate vLB module using CDS with a preloaded CBA "
+ echo " "
+ echo " demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
+ echo " - Delete the module created by instantiateVFW"
+ echo " "
+ echo " demo-k8s.sh <namespace> vfwclosedloop <pgn-ip-address>"
+ echo " - vFWCL: Sets the packet generator to high and low rates, and checks whether the policy "
+ echo " kicks in to modulate the rates back to medium"
+ echo " "
+ echo " demo-k8s.sh <namespace> <command> [<parameters>] execscript"
+ echo " - Optional parameter to execute user custom scripts located in scripts/demoscript directory"
+ echo " "
}
# Check if execscript flag is used and drop it from input arguments
echo "Number of parameters:"
echo $#
-if [ $# -lt 2 ];then
- usage
- exit
+if [ $# -lt 2 ]; then
+ usage
+ exit
fi
NAMESPACE=$1
##
while [ $# -gt 0 ]
do
- key="$1"
+ key="$1"
echo "KEY:"
echo $key
- case $key in
- init_robot)
- TAG="UpdateWebPage"
- read -s -p "WEB Site Password for user 'test': " WEB_PASSWORD
- if [ "$WEB_PASSWORD" = "" ]; then
- echo ""
- echo "WEB Password is required for user 'test'"
- exit
- fi
- VARIABLES="$VARIABLES -v WEB_PASSWORD:$WEB_PASSWORD"
- shift
- if [ $# -eq 2 ];then
- VARIABLES="$VARIABLES -v HOSTS_PREFIX:$1"
- fi
- shift
- ;;
- init)
- TAG="InitDemo"
- shift
- ;;
- vescollector)
- TAG="vescollector"
- shift
- ;;
+ case $key in
+ init_robot)
+ TAG="UpdateWebPage"
+ echo "WEB Site Password for user 'test': "
+ stty -echo
+ read WEB_PASSWORD
+ stty echo
+ if [ "$WEB_PASSWORD" = "" ]; then
+ echo ""
+ echo "WEB Password is required for user 'test'"
+ exit
+ fi
+ VARIABLES="$VARIABLES -v WEB_PASSWORD:$WEB_PASSWORD"
+ shift
+ if [ $# -eq 2 ];then
+ VARIABLES="$VARIABLES -v HOSTS_PREFIX:$1"
+ fi
+ shift
+ ;;
+ init)
+ TAG="InitDemo"
+ dcaeRegistrySynch=true
+ shift
+ ;;
+ vescollector)
+ TAG="vescollector"
+ shift
+ ;;
distribute_vcpe)
- TAG="distributeVCPE"
- shift
- ;;
- init_customer)
- TAG="InitCustomer"
- shift
- ;;
- distribute)
- TAG="InitDistribution"
- shift
- if [ $# -eq 1 ];then
- VARIABLES="$VARIABLES -v DEMO_PREFIX:$1"
- fi
- shift
- ;;
- preload)
- TAG="PreloadDemo"
- shift
- if [ $# -ne 2 ];then
- echo "Usage: demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
- exit
- fi
- VARIABLES="$VARIABLES -v VNF_NAME:$1"
- shift
- VARIABLES="$VARIABLES -v MODULE_NAME:$1"
- shift
- ;;
- appc)
- TAG="APPCMountPointDemo"
- shift
- if [ $# -ne 1 ];then
- echo "Usage: demo-k8s.sh <namespace> appc <module_name>"
- exit
- fi
- VARIABLES="$VARIABLES -v MODULE_NAME:$1"
- shift
- ;;
- instantiateVFW)
- TAG="instantiateVFW"
- VARIABLES="$VARIABLES -v GLOBAL_BUILD_NUMBER:$$"
- shift
- ;;
+ TAG="distributeVCPE"
+ shift
+ ;;
+ init_customer)
+ TAG="InitCustomer"
+ shift
+ ;;
+ distribute)
+ TAG="InitDistribution"
+ shift
+ if [ $# -eq 1 ];then
+ VARIABLES="$VARIABLES -v DEMO_PREFIX:$1"
+ fi
+ shift
+ ;;
+ preload)
+ TAG="PreloadDemo"
+ shift
+ if [ $# -ne 2 ];then
+ echo "Usage: demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
+ exit
+ fi
+ VARIABLES="$VARIABLES -v VNF_NAME:$1"
+ shift
+ VARIABLES="$VARIABLES -v MODULE_NAME:$1"
+ shift
+ ;;
+ appc)
+ TAG="APPCMountPointDemo"
+ shift
+ if [ $# -ne 1 ];then
+ echo "Usage: demo-k8s.sh <namespace> appc <module_name>"
+ exit
+ fi
+ VARIABLES="$VARIABLES -v MODULE_NAME:$1"
+ shift
+ ;;
+ instantiateVFW)
+ TAG="instantiateVFW"
+ VARIABLES="$VARIABLES -v GLOBAL_BUILD_NUMBER:$$"
+ shift
+ ;;
instantiateVFWdirectso)
TAG="instantiateVFWdirectso"
shift
VARIABLES="$VARIABLES -v GLOBAL_BUILD_NUMBER:$$"
shift
;;
- deleteVNF)
- TAG="deleteVNF"
- shift
- if [ $# -ne 1 ];then
- echo "Usage: demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
- exit
- fi
- VARFILE=$1.py
- VARIABLES="$VARIABLES -V /share/${VARFILE}"
- shift
- ;;
- cds)
- TAG="cds"
- shift
- ;;
+ deleteVNF)
+ TAG="deleteVNF"
+ shift
+ if [ $# -ne 1 ];then
+ echo "Usage: demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
+ exit
+ fi
+ VARFILE=$1.py
+ VARIABLES="$VARIABLES -V /share/${VARFILE}"
+ shift
+ ;;
+ cds)
+ TAG="cds"
+ shift
+ ;;
distributeVFWNG)
TAG="distributeVFWNG"
shift
VARIABLES="$VARIABLES -v PACKET_GENERATOR_HOST:$1 -v pkg_host:$1"
shift
;;
- *)
- usage
- exit
- esac
+ registrySynch)
+ dcaeRegistrySynch=true
+ echo $dcaeRegistrySynch
+ shift
+ echo $1
+ if [ "$1" = "path" ]; then
+ shift
+ customHelmChartsPath=$1
+ shift
+ customHelmChartsPref=$1
+ shift
+ elif [ "$1" = "repo" ]; then
+ shift
+ customHelmChartFromLocalRepo=$1
+ echo $customHelmChartFromLocalRepo
+ shift
+ else
+ echo "demo-k8s.sh <namespace> registrySynch { repo <chart name> | path [ <path to helm charts> ] [ <chart prefix> ] }"
+ fi
+ ;;
+ *)
+ usage
+ exit
+ esac
done
set -x
POD=$(kubectl --namespace $NAMESPACE get pods | sed 's/ .*//'| grep robot)
+HELM_RELEASE=$(kubectl --namespace onap get pods | sed 's/ .*//' | grep robot | sed 's/-.*//')
DIR=$(dirname "$0")
SCRIPTDIR=scripts/demoscript
OUTPUT_FOLDER=$(printf %04d $GLOBAL_BUILD_NUMBER)_demo_$key
DISPLAY_NUM=$(($GLOBAL_BUILD_NUMBER + 90))
-VARIABLEFILES="-V /share/config/robot_properties.py"
+if [ $dcaeRegistrySynch ]; then
+ CURRENT_DIR=$PWD
+ PARENT_PATH=${0%/*}
+ cd $PARENT_PATH
+ cd ../contrib/tools
+ if [ -n "$customHelmChartsPath" ]; then
+ ./registry-initialize.sh -d $customHelmChartsPath -n $NAMESPACE -r $HELM_RELEASE -p customHelmChartsPref
+ elif [ -n "$customHelmChartFromLocalRepo" ]; then
+ ./registry-initialize.sh -h $customHelmChartFromLocalRepo -n $NAMESPACE -r $HELM_RELEASE
+ else
+ ./registry-initialize.sh -d ../../dcaegen2-services/charts/ -n $NAMESPACE -r $HELM_RELEASE
+ ./registry-initialize.sh -d ../../dcaegen2-services/charts/ -n $NAMESPACE -r $HELM_RELEASE -p common
+ ./registry-initialize.sh -h certInitializer -n $NAMESPACE -r $HELM_RELEASE
+ ./registry-initialize.sh -h repositoryGenerator -n $NAMESPACE -r $HELM_RELEASE
+ ./registry-initialize.sh -h readinessCheck -n $NAMESPACE -r $HELM_RELEASE
+ ./registry-initialize.sh -h dcaegen2-services-common -n $NAMESPACE -r $HELM_RELEASE
+ ./registry-initialize.sh -h postgres -n $NAMESPACE -r $HELM_RELEASE
+ ./registry-initialize.sh -h serviceAccount -n $NAMESPACE -r $HELM_RELEASE
+ fi
+ cd $CURRENT_DIR
+fi
-kubectl --namespace $NAMESPACE exec ${POD} -- ${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} -i ${TAG} --display $DISPLAY_NUM 2> ${TAG}.out
+if [ -n "$TAG" ]; then
+ VARIABLEFILES="-V /share/config/robot_properties.py"
+ kubectl --namespace $NAMESPACE exec ${POD} -- ${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} -i ${TAG} --display $DISPLAY_NUM 2> ${TAG}.out
+fi
\ No newline at end of file