.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. Copyright 2018 Amdocs, Bell Canada
+.. _oom_user_guide:
.. Links
.. _Curated applications for Kubernetes: https://github.com/kubernetes/charts
Pre-requisites
--------------
-Your environment must have both the Kubernetes `kubectl` and Helm setup as a one time activity.
+Your environment must have both the Kubernetes `kubectl` and Helm setup as a
+one time activity.
Install Kubectl
~~~~~~~~~~~~~~~
-Enter the following to install kubectl (on Ubuntu, there are slight differences on other O/Ss), the Kubernetes command line interface used to manage a Kubernetes cluster::
+Enter the following to install kubectl (on Ubuntu, there are slight differences
+on other O/Ss), the Kubernetes command line interface used to manage a
+Kubernetes cluster::
> curl -LO https://storage.googleapis.com/kubernetes-release/release/v1.8.10/bin/linux/amd64/kubectl
> chmod +x ./kubectl
> sudo mv ./kubectl /usr/local/bin/kubectl
> mkdir ~/.kube
-Paste kubectl config from Rancher (see the :ref:`cloud-setup-guide-label` for alternative Kubenetes environment setups) into the `~/.kube/config` file.
+Paste kubectl config from Rancher (see the :ref:`cloud-setup-guide-label` for
+alternative Kubernetes environment setups) into the `~/.kube/config` file.
Verify that the Kubernetes config is correct::
Install Helm
~~~~~~~~~~~~
-Helm is used by OOM for package and configuration management. To install Helm, enter the following::
+Helm is used by OOM for package and configuration management. To install Helm,
+enter the following::
> wget http://storage.googleapis.com/kubernetes-helm/helm-v2.9.1-linux-amd64.tar.gz
> tar -zxvf helm-v2.9.1-linux-amd64.tar.gz
Install the Helm Repo
---------------------
-Once kubectl and Helm are setup, one needs to setup a local Helm server to server up the ONAP charts::
+Once kubectl and Helm are setup, one needs to setup a local Helm server to
+server up the ONAP charts::
> helm install osn/onap
To prepare your system for an installation of ONAP, you'll need to::
- > git clone -b beijing http://gerrit.onap.org/r/oom
+ > git clone -b frankfurt http://gerrit.onap.org/r/oom
> cd oom/kubernetes
> helm init
> helm serve &
-Note the port number that is listed and use it in the Helm repo add as follows::
+Note the port number that is listed and use it in the Helm repo add as
+follows::
> helm repo add local http://127.0.0.1:8879
In any case, setup of the Helm repository is a one time activity.
-Once the repo is setup, installation of ONAP can be done with a single command::
+Next, install Helm Plugins required to deploy the ONAP Casablanca release::
- > helm install local/onap --name development
+ > cp -R helm/plugins/ ~/.helm
+
+Once the repo is setup, installation of ONAP can be done with a single
+command::
+
+ > helm deploy development local/onap --namespace onap
This will install ONAP from a local repository in a 'development' Helm release.
As described below, to override the default configuration values provided by
OOM, an environment file can be provided on the command line as follows::
- > helm install local/onap --name development -f onap-development.yaml
+ > helm deploy development local/onap --namespace onap -f overrides.yaml
To get a summary of the status of all of the pods (containers) running in your
deployment::
To install a specific version of a single ONAP component (`so` in this example)
-with the given name enter::
+with the given release name enter::
- > helm install onap/so --version 2.0.1 -n so
+ > helm deploy so onap/so --version 3.0.1
To display details of a specific resource or group of resources type::
The top level onap/values.yaml file contains the values required to be set
before deploying ONAP. Here is the contents of this file:
-.. include:: onap_values.yaml
+.. include:: ../kubernetes/onap/values.yaml
:code: yaml
One may wish to create a value file that is specific to a given deployment such
To deploy ONAP with this environment file, enter::
- > helm install local/onap -n beijing -f environments/onap-production.yaml
+ > helm deploy local/onap -n onap -f environments/onap-production.yaml
.. include:: environments_onap_demo.yaml
:code: yaml
user's own environment (a laptop etc.) the portal application's port 8989 is
exposed through a `Kubernetes LoadBalancer`_ object.
-Typically, to be able to access the Kubernetes nodes publicly a public address is
-assigned. In Openstack this is a floating IP address.
+Typically, to be able to access the Kubernetes nodes publicly a public address
+is assigned. In Openstack this is a floating IP address.
When the `portal-app` chart is deployed a Kubernetes service is created that
instantiates a load balancer. The LB chooses the private interface of one of
10.12.6.155 portal.api.simpledemo.onap.org
10.12.6.155 vid.api.simpledemo.onap.org
10.12.6.155 sdc.api.fe.simpledemo.onap.org
+ 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
+ 10.12.6.155 sdc.dcae.plugin.simpledemo.onap.org
10.12.6.155 portal-sdk.simpledemo.onap.org
10.12.6.155 policy.api.simpledemo.onap.org
10.12.6.155 aai.api.sparky.simpledemo.onap.org
10.12.6.155 cli.api.simpledemo.onap.org
10.12.6.155 msb.api.discovery.simpledemo.onap.org
+ 10.12.6.155 msb.api.simpledemo.onap.org
+ 10.12.6.155 clamp.api.simpledemo.onap.org
+ 10.12.6.155 so.api.simpledemo.onap.org
+ 10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
Ensure you've disabled any proxy settings the browser you are using to access
-the portal and then simply access the familiar URL:
-http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+the portal and then simply access now the new ssl-encrypted URL:
+https://portal.api.simpledemo.onap.org:30225/ONAPPORTAL/login.htm
+
+.. note::
+ Using the HTTPS based Portal URL the Browser needs to be configured to accept
+ unsecure credentials.
+ Additionally when opening an Application inside the Portal, the Browser
+ might block the content, which requires to disable the blocking and reloading
+ of the page
+.. note::
+ Besides the ONAP Portal the Components can deliver additional user interfaces,
+ please check the Component specific documentation.
-.. note::
+.. note::
| Alternatives Considered:
All highly available systems include at least one facility to monitor the
health of components within the system. Such health monitors are often used as
inputs to distributed coordination systems (such as etcd, zookeeper, or consul)
-and monitoring systems (such as nagios or zabbix). OOM provides two mechanims
+and monitoring systems (such as nagios or zabbix). OOM provides two mechanisms
to monitor the real-time health of an ONAP deployment:
- a Consul GUI for a human operator or downstream monitoring systems and
- a set of liveness probes which feed into the Kubernetes manager which
are described in the Heal section.
-Within ONAP, Consul is the monitoring system of choice and deployed by OOM in two parts:
+Within ONAP, Consul is the monitoring system of choice and deployed by OOM in
+two parts:
- a three-way, centralized Consul server cluster is deployed as a highly
available monitor of all of the ONAP components, and
For example, to upgrade a container by changing configuration, specifically an
environment value::
- > helm upgrade beijing onap/so --version 2.0.1 --set enableDebug=true
+ > helm deploy onap onap/so --version 2.0.1 --set enableDebug=true
Issuing this command will result in the appropriate container being stopped by
Kubernetes and replaced with a new container with the new environment value.
To upgrade a component to a new version with a new configuration file enter::
- > helm upgrade beijing onap/so --version 2.0.2 -f environments/demo.yaml
+ > helm deploy onbap onap/so --version 2.0.2 -f environments/demo.yaml
To fetch release history enter::
what will happen with a given command prior to actually deleting anything. For
example::
- > helm delete --dry-run beijing
+ > helm undeploy onap --dry-run
-will display the outcome of deleting the 'beijing' release from the deployment.
+will display the outcome of deleting the 'onap' release from the
+deployment.
To completely delete a release and remove it from the internal store enter::
- > helm delete --purge beijing
+ > helm undeploy onap --purge
One can also remove individual components from a deployment by changing the
ONAP configuration values. For example, to remove `so` from a running
deployment enter::
- > helm upgrade beijing osn/onap --set so.enabled=false
+ > helm undeploy onap-so --purge
will remove `so` as the configuration indicates it's no longer part of the
deployment. This might be useful if a one wanted to replace just `so` by
-installing a custom version.
+installing a custom version.