--- /dev/null
+#!/bin/bash
+
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+function memory_details(){
+ #General memory details
+ echo "> top -bn1 | head -3"
+ top -bn1 | head -3
+ echo
+
+ echo "> free -h"
+ free -h
+ echo
+
+ #Memory details per Docker
+ echo "> docker ps"
+ docker ps
+ echo
+
+ echo "> docker stats --no-stream"
+ docker stats --no-stream
+ echo
+}
+function fibonacci_number(){
+ set +x
+ if [ $1 -le 1 ]
+ then
+ echo "1"
+ elif [ $1 -le 10 ]
+ then
+ Num=$1
+ f1=0
+ f2=1
+ fn=-1
+ for i in `eval echo {1..$Num}`;do
+ fn=$((f1+f2))
+ f1=$f2
+ f2=$fn
+ done
+ echo $fn
+ else
+ echo "30"
+ fi
+}
+function wait_curl_driver(){
+ #Parameters:
+ #CURL_COMMAND - the URL on which the curl command will be executed
+ #GREP_STRING - Desired string to be found inside the body response of the
+ # previous curl command
+ #EXCLUDE_STRING - If the filtered string (GREP_STRING) must not exist in
+ # the body response of the curl
+ #WAIT_MESSAGE - the message to be displayed for logging purpose. (optional)
+ #REPEAT_NUMBER - the maximum number of tries before abandoning the curl
+ # command (optional, by default = 15)
+ #MAX_TIME - Maximum time allowed for the transfer (in seconds)
+ #STATUS_CODE - A HTTP status code desired to be found by getting the link
+ # /!\ IMPORTANT NOTICE: the usage of STATUS_CODE option turn GREP_STRING/
+ # /!\ EXCLUDE_STRING/and the MAX_TIME options becomes obsolete with no
+ # /!\ execution impact
+ #MEMORY_USAGE - If Parameters exists shows the memory usage after curl
+ # execution(s)
+
+ repeat_max=15
+ parameters="$@"
+
+ #WAIT_MESSAGE
+ if [[ $parameters == *"WAIT_MESSAGE"* ]]
+ then
+ wait_message=`echo $parameters | sed -e "s/.*WAIT_MESSAGE=//g"`
+ wait_message=`echo $wait_message | sed -e "s/ .*//g"`
+ else
+ wait_message="wait ..."
+ fi
+
+ #REPEAT_NUMBER
+ if [[ $parameters == *"REPEAT_NUMBER"* ]]
+ then
+ repeat_max=`echo $parameters | sed -e "s/.*REPEAT_NUMBER=//g"`
+ repeat_max=`echo $repeat_max | sed -e "s/ .*//g"`
+ fi
+
+ #CURL_COMMAND
+ if [[ $parameters == *"CURL_COMMAND"* ]]
+ then
+ curl_command=`echo $parameters | sed -e 's/.*CURL_COMMAND=//g'`
+ curl_command=`echo $curl_command | sed -e 's/ .*//g'`
+ else
+ echo "-Curl is empty-" # Or no parameterseter passed.
+ return 0
+ fi
+
+ #MAX_TIME
+ if [[ $parameters == *"MAX_TIME"* ]]
+ then
+ max_time=`echo $parameters | sed -e 's/.*MAX_TIME=//g'`
+ max_time=`echo $max_time | sed -e 's/ .*//g'`
+ else
+ max_time="5"
+ fi
+
+ exclude_string=""
+ #EXCLUDE_STRING
+ if [[ $parameters == *"EXCLUDE_STRING"* ]]
+ then
+ exclude_string="-v"
+ fi
+
+ status_code=""
+ #STATUS_CODE
+ if [[ $parameters == *"STATUS_CODE"* ]]
+ then
+ status_code=`echo $parameters | sed -e 's/.*STATUS_CODE=//g'`
+ status_code=`echo $status_code | sed -e 's/ .*//g'`
+ fi
+
+ for i in `eval echo {1..$repeat_max}`; do
+ response_code=`curl -o /dev/null --silent --head --write-out '%{http_code}' $curl_command`
+ echo "..."
+ if [[ ! -z $status_code ]] ; then
+ if [ "$status_code" -eq "$response_code" ]
+ then
+ echo "SUCCESS:Actual Status code <$response_code> match the expected code <$status_code>"
+ return 0
+ else
+ echo "WARNING:Expected <$status_code> but Actual <$response_code>"
+ fi
+ else
+ #GREP_STRING
+ if [[ $parameters == *"GREP_STRING"* ]]
+ then
+ grep_command=`echo $parameters | sed -e 's/.*GREP_STRING=//g'`
+ grep_command=`echo $grep_command | sed -e 's/ REPEAT_NUMBER=.*//g' | sed -e 's/ CURL_COMMAND=.*//g' | sed -e 's/ WAIT_MESSAGE=.*//g' | sed -e 's/ MAX_TIME=.*//g' | sed -e 's/ EXCLUDE_STRING.*//g'`
+ else
+ echo "-Grep_command is empty-" # Or no parameters passed.
+ return 0
+ fi
+
+ str=`curl -sS -m$max_time $curl_command | grep "$grep_command"`
+ echo "BODY::$str"
+ if [[ ! -z $exclude_string ]]
+ then
+ if [[ -z $str ]]
+ then
+ echo "SUCCESS: body response does not contains '$grep_command'";
+ break;
+ else
+ echo "Fall_Short: Body response still contains '$grep_command'"
+ fi
+ else
+ if [[ ! -z $str ]]
+ then
+ echo "SUCCESS: body response contains '$grep_command'";
+ break;
+ else
+ echo "Fall_Short: Element '$grep_command' not found yet # "$i""
+ fi
+ fi
+
+ if [ "$?" = "7" ]; then
+ echo 'Connection refused or can not connect to server/proxy';
+ str=''
+ fi
+ fi
+ seconds2sleep=`fibonacci_number $i`
+ echo $wait_message
+ echo "Iteration::$i out of $repeat_max "
+ echo "Quiet time for $seconds2sleep seconds ..."
+ sleep $seconds2sleep
+
+ # if waiting for a long time, log system load
+ if [ $i -gt 45 ]
+ then
+ memory_details
+ fi
+ done
+ #MEMORY_USAGE
+ if [[ $parameters == *"MEMORY_USAGE"* ]]
+ then
+ echo "==========================MEMORY USAGE=================================="
+ memory_details
+ echo "========================================================================"
+ fi
+ return 0
+}
+
+function run_simulator ()
+{
+ run_robottestlib
+ run_simulator_docker $1
+}
+
+function run_robottestlib ()
+{
+ #Start the robottest REST library if not started
+ if ! pgrep -f robottest > /dev/null
+ then
+ #Download the latest robottest jar
+ wget -q -O ${SCRIPTS}/integration/mockserver/org.openo.robottest.jar "https://nexus.open-o.org/service/local/artifact/maven/redirect?r=snapshots&g=org.openo.integration&a=org.openo.robottest&e=jar&v=LATEST"
+ chmod +x ${SCRIPTS}/integration/mockserver/org.openo.robottest.jar
+ eval `java -cp ${SCRIPTS}/integration/mockserver/org.openo.robottest.jar org.openo.robot.test.robottest.MyRemoteLibrary` &
+ fi
+}
+
+function run_simulator_docker ()
+{
+ #Start the simulator docker if not started
+ SIMULATOR_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' simulator`
+ if [[ -z $SIMULATOR_IP ]]
+ then
+ echo "Starting simulator docker..."
+ SIMULATOR_JSON=$1
+ if [[ -z $SIMULATOR_JSON ]]
+ then
+ SIMULATOR_JSON=main.json
+ fi
+ docker run -d -i -t --name simulator -e SIMULATOR_JSON=$SIMULATOR_JSON -p 18009:18009 -p 18008:18008 openoint/simulate-test-docker
+ SIMULATOR_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' simulator`
+ fi
+
+ #Set the simulator IP in robot variables
+ ROBOT_VARIABLES=${ROBOT_VARIABLES}" -v SIMULATOR_IP:${SIMULATOR_IP} -v SCRIPTS:${SCRIPTS}"
+ echo ${ROBOT_VARIABLES}
+}
+
+function get_docker_compose_service ()
+{
+ local service=$1
+ local compose_file=${2:-docker-compose.yml}
+
+ echo $(docker-compose --file ./${compose_file} ps | grep $service | cut -d " " -f1 )
+}
+
+function bypass_ip_adress ()
+{
+ local ip_address=$1
+
+ if [[ $no_proxy && $no_proxy != *$ip_address* ]]; then
+ export no_proxy=$no_proxy,$ip_address
+ fi
+}
+
+function wait_for_service_init ()
+{
+ local service_url=$1
+
+ for delay in {1..50}; do
+ curl -sS ${service_url} && break
+ echo "$delay - Waiting for $service_url..."
+ sleep $delay
+ done
+}
Code Review / dmaap / datarouter.git / blobdiff