* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
public enum EcompErrorCode {
- E_100("Authentication problem towards U-EB server. Reason: %s",
- "An Authentication failure occured during access to UEB server. Please check that UEB keys are configured correctly in ASDC BE distribution configuration."), E_199(
- "Internal authentication problem. Description: %s"),
-
- E_200("ASDC Backend probably lost connectivity to either one of the following components: JanusGraph DB, Cassandra, Onboarding, UEB Cluster. Please check the logs for more information."), E_201(
- "ASDC Backend probably lost connectivity to JanusGraph DB. Please check the logs for more information."), E_202(
- "ASDC Backend probably lost connectivity to ElasticSearch. Please check the logs for more information."), E_203(
- "ASDC Backend probably lost connectivity to UEB Cluster. Please check the logs for more information.",
- "Check connectivity to UEB cluster which is configured under parameter uebServers in distribution-configuration.yaml."), E_204(
- "Unable to connect to a valid ASDC Backend Server",
- "Please check connectivity from this FE instance towards BE or BE Load Balancer. Please check that parameters in FE configuration.yaml: beHost, beHttpPort and beSslPort point to a valid host and port values."),
-
- E_205("ASDC Backend Recovery to either one of the following components: JanusGraph DB, Cassandra, Onboarding, UEB Cluster."), E_206(
- "ASDC Backend connection recovery to JanusGraph DB."), E_207(
- "ASDC Backend connection recovery to ElasticSearch."), E_208(
- "ASDC Backend connection recovery to UEB Cluster."), E_209(
- "Connectivity to ASDC BE Server is recovered."), E_210(
- "Connection problem towards U-EB server. Reason: %s",
- "Please check that that parameter uebServers in distribution-configuration.yaml points to a valid UEB Cluster."), E_211(
- "Connection problem towards U-EB server. Cannot reach host %s",
- "Please check that that parameter uebServers in distribution-configuration.yaml points to a valid UEB Cluster."), E_212(
- "Couldn't resolve hostIP. Desciption: %s"), E_213(
- "Site switch over was done. Site is now in %s mode"), E_214(
- "Dmaap Connection problem."), E_299(
- "Internal Connection problem. Description: %s"),
-
- // [resource/service/product]
- E_300("Mandatory %s Component %s cannot be found in repository"),
- // [SERVICE/RESOURCE/PRODUCT] [id] is not valid. Cannot be found in graph.
- E_301("%s Component %s is not valid. Cannot be found in graph."), E_302(
- "Configuration parameter %s is invalid. Value configured is %s."), E_303(
- "Error occured during access to U-EB Server. Data not found: %s",
- "An error occured during access to UEB Server, ASDC failed to either register or unregister to/from UEB topic."), E_304(
- "The artifact type %s does not appear in the list of valid artifacts %s"), E_305(
- "Configuration parameter %s is missing"), E_306(
- "Configuration parameter %s is invalid. At least %s values shall be configured"), E_307(
- "Invalid configuration in YAML file. %s"), E_308(
- "Artifact uploaded has missing information. Missing %s"), E_309(
- "Artifact %s requested is not found"), E_310(
- "User %s requested is not found"), E_311(
- "Ecomp error description params mismatch between code and YAML or wrong format, name: %s"), E_312(
- "Ecomp error element not found in YAML, name: %s"),
-
- E_399("Internal Invalid Object. Description: %s"),
-
- E_400("The type %s of %s is invalid"), E_401("The value %s of %s from type %s is invalid"), E_402(
- "Payload of artifact uploaded is invalid (invalid MD5 or encryption)"), E_403(
- "Input for artifact metadata is invalid"), E_404("%s %s required is missing"), E_405(
- "Failed to convert json input to object"), E_406("Distribution %s required is missing"),
-
- E_499("Invalid input. Description: %s"),
-
- E_500("Catalog-BE was not initialized properly"), E_501(
- "Failed to add resource instance of resource %s to service %s"), E_502(
- "Error occured during access to U-EB Server. Operation: %s",
- "An error occured in ASDC distribution mechanism. Please check the logs for more information."), E_503(
- "Error occured in Distribution Engine. Failed operation: %s",
- "System Error occured in ASDC Distribution Engine. Please check ASDC logs for more details."), E_504(
- "Failed adding node of type %s to graph."), E_505(
- "Operation towards database failed.",
- "Please check JanusGraph DB health or look at the logs for more details."), E_506(
- "Unexpected error during operation"), E_507(
- "Going to execute rollback on graph."), E_508(
- "Failed to lock object for update. Type = %s, Id = %s"), E_509(
- "Failed to create node %s on graph. status is %s"), E_510(
- "Failed to update node %s on graph. Status is %s"), E_511(
- "Failed to delete node %s on graph. Status is %s"), E_512(
- "Failed to retrieve node %s from graph. Status is %s"), E_513(
- "Failed to find parent node of %s on graph. Status is %s"), E_514(
- "Failed to fetch all nodes with type %s of parent node %s . Status is %s"), E_515(
- "Cannot find node with type %s associated with node %s . Status is %s"), E_516(
- "Error occured in Component Cleaner Task. Failed operation: %s"), E_517(
- "Error when logging FE HTTP request/response"), E_518(
- "Error when trying to access FE Portal page"),
-
- E_599("Internal flow error. Operation: %s"),
-
- E_900("Unexpected error during BE REST API execution"), E_901("General error during FE Health Check"), E_999(
- "Unexpected error. Description: %s");
-
- /*
- * 100-199 Security/Permission Related - Authentication problems (from
- * external client, to external server) - Certification errors -
- *
- * 200-299 Availability/Timeout Related - connectivity error - connection
- * timeout
- *
- * 300-399 Data Access/Integrity Related - Data in graph in invalid(E.g. no
- * creator is found for service) - Artifact is missing in ES, but exists in
- * graph.
- *
- * 400-499 Schema Interface Type/Validation - received payload checksum is
- * inavlid - received json is not valid
- *
- * 500-599 Business/Flow Processing Related - check out to service is not
- * allowed - rollback is done - failed to generate heat file
- *
- *
- * 600-899 Reserved – do not use
- *
- * 900-999 Unknown Errors - unexpected exception
- */
-
- String description;
- String resolution;
-
- EcompErrorCode(String description, String resolution) {
- this.description = description;
- this.resolution = resolution;
- }
-
- EcompErrorCode(String description) {
- this.description = description;
- }
-
- public String getDescription() {
- return description;
- }
-
- public void setDescription(String description) {
- this.description = description;
- }
-
- public String getResolution() {
- return resolution;
- }
-
- public void setResolution(String resolution) {
- this.resolution = resolution;
- }
+ E_100("Authentication problem towards U-EB server. Reason: %s",
+ "An Authentication failure occured during access to UEB server. Please check that UEB keys are configured correctly in ASDC BE distribution configuration."), E_199(
+ "Internal authentication problem. Description: %s"),
+
+ E_200("ASDC Backend probably lost connectivity to either one of the following components: JanusGraph DB, Cassandra, Onboarding, UEB Cluster. Please check the logs for more information."), E_201(
+ "ASDC Backend probably lost connectivity to JanusGraph DB. Please check the logs for more information."), E_202(
+ "ASDC Backend probably lost connectivity to ElasticSearch. Please check the logs for more information."), E_203(
+ "ASDC Backend probably lost connectivity to UEB Cluster. Please check the logs for more information.",
+ "Check connectivity to UEB cluster which is configured under parameter uebServers in distribution-configuration.yaml."), E_204(
+ "Unable to connect to a valid ASDC Backend Server",
+ "Please check connectivity from this FE instance towards BE or BE Load Balancer. Please check that parameters in FE configuration.yaml: beHost, beHttpPort and beSslPort point to a valid host and port values."),
+
+ E_205("ASDC Backend Recovery to either one of the following components: JanusGraph DB, Cassandra, Onboarding, UEB Cluster."), E_206(
+ "ASDC Backend connection recovery to JanusGraph DB."), E_207(
+ "ASDC Backend connection recovery to ElasticSearch."), E_208(
+ "ASDC Backend connection recovery to UEB Cluster."), E_209(
+ "Connectivity to ASDC BE Server is recovered."), E_210(
+ "Connection problem towards U-EB server. Reason: %s",
+ "Please check that that parameter uebServers in distribution-configuration.yaml points to a valid UEB Cluster."), E_211(
+ "Connection problem towards U-EB server. Cannot reach host %s",
+ "Please check that that parameter uebServers in distribution-configuration.yaml points to a valid UEB Cluster."), E_212(
+ "Couldn't resolve hostIP. Desciption: %s"), E_213(
+ "Site switch over was done. Site is now in %s mode"), E_214(
+ "Dmaap Connection problem."), E_299(
+ "Internal Connection problem. Description: %s"),
+
+ // [resource/service/product]
+ E_300("Mandatory %s Component %s cannot be found in repository"),
+ // [SERVICE/RESOURCE/PRODUCT] [id] is not valid. Cannot be found in graph.
+ E_301("%s Component %s is not valid. Cannot be found in graph."), E_302(
+ "Configuration parameter %s is invalid. Value configured is %s."), E_303(
+ "Error occured during access to U-EB Server. Data not found: %s",
+ "An error occured during access to UEB Server, ASDC failed to either register or unregister to/from UEB topic."), E_304(
+ "The artifact type %s does not appear in the list of valid artifacts %s"), E_305(
+ "Configuration parameter %s is missing"), E_306(
+ "Configuration parameter %s is invalid. At least %s values shall be configured"), E_307(
+ "Invalid configuration in YAML file. %s"), E_308(
+ "Artifact uploaded has missing information. Missing %s"), E_309(
+ "Artifact %s requested is not found"), E_310(
+ "User %s requested is not found"), E_311(
+ "Ecomp error description params mismatch between code and YAML or wrong format, name: %s"), E_312(
+ "Ecomp error element not found in YAML, name: %s"),
+
+ E_399("Internal Invalid Object. Description: %s"),
+
+ E_400("The type %s of %s is invalid"), E_401("The value %s of %s from type %s is invalid"), E_402(
+ "Payload of artifact uploaded is invalid (invalid MD5 or encryption)"), E_403(
+ "Input for artifact metadata is invalid"), E_404("%s %s required is missing"), E_405(
+ "Failed to convert json input to object"), E_406("Distribution %s required is missing"),
+
+ E_499("Invalid input. Description: %s"),
+
+ E_500("Catalog-BE was not initialized properly"), E_501(
+ "Failed to add resource instance of resource %s to service %s"), E_502(
+ "Error occured during access to U-EB Server. Operation: %s",
+ "An error occured in ASDC distribution mechanism. Please check the logs for more information."), E_503(
+ "Error occured in Distribution Engine. Failed operation: %s",
+ "System Error occured in ASDC Distribution Engine. Please check ASDC logs for more details."), E_504(
+ "Failed adding node of type %s to graph."), E_505(
+ "Operation towards database failed.",
+ "Please check JanusGraph DB health or look at the logs for more details."), E_506(
+ "Unexpected error during operation"), E_507(
+ "Going to execute rollback on graph."), E_508(
+ "Failed to lock object for update. Type = %s, Id = %s"), E_509(
+ "Failed to create node %s on graph. status is %s"), E_510(
+ "Failed to update node %s on graph. Status is %s"), E_511(
+ "Failed to delete node %s on graph. Status is %s"), E_512(
+ "Failed to retrieve node %s from graph. Status is %s"), E_513(
+ "Failed to find parent node of %s on graph. Status is %s"), E_514(
+ "Failed to fetch all nodes with type %s of parent node %s . Status is %s"), E_515(
+ "Cannot find node with type %s associated with node %s . Status is %s"), E_516(
+ "Error occured in Component Cleaner Task. Failed operation: %s"), E_517(
+ "Error when logging FE HTTP request/response"), E_518(
+ "Error when trying to access FE Portal page"),
+
+ E_599("Internal flow error. Operation: %s"),
+
+ E_900("Unexpected error during BE REST API execution"), E_901("General error during FE Health Check"), E_999(
+ "Unexpected error. Description: %s");
+
+ /*
+ * 100-199 Security/Permission Related - Authentication problems (from
+ * external client, to external server) - Certification errors -
+ *
+ * 200-299 Availability/Timeout Related - connectivity error - connection
+ * timeout
+ *
+ * 300-399 Data Access/Integrity Related - Data in graph in invalid(E.g. no
+ * creator is found for service) - Artifact is missing in ES, but exists in
+ * graph.
+ *
+ * 400-499 Schema Interface Type/Validation - received payload checksum is
+ * inavlid - received json is not valid
+ *
+ * 500-599 Business/Flow Processing Related - check out to service is not
+ * allowed - rollback is done - failed to generate heat file
+ *
+ *
+ * 600-899 Reserved – do not use
+ *
+ * 900-999 Unknown Errors - unexpected exception
+ */
+
+ private String description;
+ private String resolution;
+
+ EcompErrorCode(String description, String resolution) {
+ this.description = description;
+ this.resolution = resolution;
+ }
+
+ EcompErrorCode(String description) {
+ this.description = description;
+ }
+
+ public String getDescription() {
+ return description;
+ }
+
+ public void setDescription(String description) {
+ this.description = description;
+ }
+
+ public String getResolution() {
+ return resolution;
+ }
+
+ public void setResolution(String resolution) {
+ this.resolution = resolution;
+ }
}
Code Review / sdc.git / blobdiff