scalar-unit.frequency:
derived_from: scalar-unit
-tosca.datatypes.Credential:
+tosca.datatypes.Credential:
derived_from: tosca.datatypes.Root
- properties:
- protocol:
+ properties:
+ protocol:
type: string
required: false
- token_type:
+ token_type:
type: string
default: password
- token:
+ token:
type: string
keys:
type: map
type: string
nfc_naming_code:
type: string
- network_role:
+ network_role:
type: string
pps_capacity:
type: string
type: string
description: deprecated
-tosca.datatypes.TimeInterval:
+tosca.datatypes.TimeInterval:
derived_from: tosca.datatypes.Root
properties:
- start_time:
+ start_time:
type: timestamp
required: true
- end_time:
+ end_time:
type: timestamp
required: true
tosca.datatypes.network.NetworkInfo:
derived_from: tosca.datatypes.Root
properties:
- network_name:
+ network_name:
type: string
- network_id:
+ network_id:
type: string
addresses:
type: list
entry_schema:
type: string
-tosca.datatypes.network.PortInfo:
+tosca.datatypes.network.PortInfo:
derived_from: tosca.datatypes.Root
- properties:
- port_name:
+ properties:
+ port_name:
type: string
- port_id:
+ port_id:
type: string
- network_id:
+ network_id:
type: string
- mac_address:
+ mac_address:
type: string
addresses:
type: list
tosca.datatypes.network.PortDef:
derived_from: integer
- constraints:
+ constraints:
- in_range: [ 1, 65535 ]
-tosca.datatypes.network.PortSpec:
+tosca.datatypes.network.PortSpec:
derived_from: tosca.datatypes.Root
- properties:
- protocol:
+ properties:
+ protocol:
type: string
required: true
default: tcp
constraints:
- valid_values: [ udp, tcp, igmp ]
- target:
+ target:
type: tosca.datatypes.network.PortDef
target_range:
- type: range
+ type: range
constraints:
- in_range: [ 1, 65535 ]
source:
type: string
description: MAC address
required: false
- status: SUPPORTED
+ status: supported
ip_address:
type: string
description: IP address
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.network.subnet.HostRoute:
derived_from: tosca.datatypes.Root
type: string
description: The destination for static route
required: false
- status: SUPPORTED
+ status: supported
nexthop:
type: string
description: The next hop for the destination
required: false
- status: SUPPORTED
-
+ status: supported
+
org.openecomp.datatypes.heat.network.AllocationPool:
derived_from: tosca.datatypes.Root
description: The start and end addresses for the allocation pool
type: string
description: Start address for the allocation pool
required: false
- status: SUPPORTED
+ status: supported
end:
type: string
description: End address for the allocation pool
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.network.neutron.Subnet:
derived_from: tosca.datatypes.Root
type: string
description: The ID of the tenant who owns the network
required: false
- status: SUPPORTED
+ status: supported
enable_dhcp:
type: boolean
description: Set to true if DHCP is enabled and false if DHCP is disabled
required: false
default: true
- status: SUPPORTED
+ status: supported
ipv6_address_mode:
type: string
description: IPv6 address mode
required: false
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- dhcpv6-stateful
type: string
description: IPv6 RA (Router Advertisement) mode
required: false
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- dhcpv6-stateful
description: Extra parameters to include in the request
required: false
default: {}
- status: SUPPORTED
+ status: supported
entry_schema:
type: string
allocation_pools:
type: list
description: The start and end addresses for the allocation pools
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.network.AllocationPool
subnetpool:
type: string
description: The name or ID of the subnet pool
required: false
- status: SUPPORTED
+ status: supported
dns_nameservers:
type: list
description: A specified set of DNS name servers to be used
required: false
default: []
- status: SUPPORTED
+ status: supported
entry_schema:
- type: string
+ type: string
host_routes:
type: list
description: The gateway IP address
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.network.subnet.HostRoute
ip_version:
description: The gateway IP address
required: false
default: 4
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- '4'
type: string
description: The name of the subnet
required: false
- status: SUPPORTED
+ status: supported
prefixlen:
type: integer
description: Prefix length for subnet allocation from subnet pool
required: false
- status: SUPPORTED
+ status: supported
constraints:
- greater_or_equal: 0
cidr:
type: string
description: The CIDR
required: false
- status: SUPPORTED
+ status: supported
gateway_ip:
type: string
description: The gateway IP address
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.novaServer.network.PortExtraProperties:
derived_from: tosca.datatypes.Root
type: boolean
description: Flag to enable/disable port security on the port
required: false
- status: SUPPORTED
+ status: supported
mac_address:
type: string
description: MAC address to give to this port
required: false
- status: SUPPORTED
+ status: supported
admin_state_up:
type: boolean
description: The administrative state of this port
required: false
default: true
- status: SUPPORTED
+ status: supported
qos_policy:
type: string
description: The name or ID of QoS policy to attach to this port
required: false
- status: SUPPORTED
+ status: supported
allowed_address_pairs:
type: list
description: Additional MAC/IP address pairs allowed to pass through the port
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.network.AddressPair
binding:vnic_type:
type: string
description: The vnic type to be bound on the neutron port
required: false
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- macvtap
description: Extra parameters to include in the request
required: false
default: {}
- status: SUPPORTED
+ status: supported
entry_schema:
type: string
type: string
description: Port id
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.neutron.port.FixedIps:
derived_from: tosca.datatypes.Root
type: string
description: Subnet in which to allocate the IP address for this port
required: false
- status: SUPPORTED
+ status: supported
ip_address:
type: string
description: IP address desired in the subnet for this port
required: false
- status: SUPPORTED
+ status: supported
subnet_id:
type: string
description: Subnet in which to allocate the IP address for this port
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.FileInfo:
derived_from: tosca.datatypes.Root
type: string
description: The required URI string (relative or absolute) which can be used to locate the file
required: true
- status: SUPPORTED
+ status: supported
file_type:
type: string
description: The type of the file
required: true
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- base
type: string
description: Start port
required: false
- status: SUPPORTED
+ status: supported
end_port:
type: string
description: End port
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrail.network.rule.Rule:
derived_from: tosca.datatypes.Root
type: list
description: Source ports
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrail.network.rule.PortPairs
protocol:
type: string
description: Protocol
required: false
- status: SUPPORTED
+ status: supported
dst_addresses:
type: list
description: Destination addresses
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrail.network.rule.VirtualNetwork
apply_service:
type: string
description: Service to apply
required: false
- status: SUPPORTED
+ status: supported
dst_ports:
type: list
description: Destination ports
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrail.network.rule.PortPairs
src_addresses:
type: list
description: Source addresses
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrail.network.rule.VirtualNetwork
direction:
type: string
description: Direction
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrail.network.rule.RuleList:
derived_from: tosca.datatypes.Root
type: list
description: Contrail network rule
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrail.network.rule.Rule
type: string
description: Virtual network
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.network.neutron.SecurityRules.Rule:
derived_from: tosca.datatypes.Root
type: string
description: The remote group ID to be associated with this security group rule
required: false
- status: SUPPORTED
+ status: supported
protocol:
type: string
description: The protocol that is matched by the security group rule
required: false
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- tcp
description: Ethertype of the traffic
required: false
default: IPv4
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- IPv4
type: integer
description: 'The maximum port number in the range that is matched by the security group rule. '
required: false
- status: SUPPORTED
+ status: supported
constraints:
- in_range:
- 0
type: string
description: The remote IP prefix (CIDR) to be associated with this security group rule
required: false
- status: SUPPORTED
+ status: supported
remote_mode:
type: string
description: Whether to specify a remote group or a remote IP prefix
required: false
default: remote_ip_prefix
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- remote_ip_prefix
description: The direction in which the security group rule is applied
required: false
default: ingress
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- egress
type: integer
description: The minimum port number in the range that is matched by the security group rule.
required: false
- status: SUPPORTED
+ status: supported
constraints:
- in_range:
- 0
type: string
description: Substitute Service Template
required: true
- status: SUPPORTED
+ status: supported
index_value:
type: integer
description: Index value of the substitution service template runtime instance
required: false
default: 0
- status: SUPPORTED
+ status: supported
constraints:
- greater_or_equal: 0
count:
description: Count
required: false
default: 1
- status: SUPPORTED
+ status: supported
scaling_enabled:
type: boolean
description: Indicates whether service scaling is enabled
required: false
default: true
- status: SUPPORTED
+ status: supported
mandatory:
type: boolean
description: Mandatory
required: false
default: true
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.RefDataSequence:
derived_from: tosca.datatypes.Root
type: integer
description: Network Policy ref data sequence Major
required: false
- status: SUPPORTED
+ status: supported
network_policy_refs_data_sequence_minor:
type: integer
description: Network Policy ref data sequence Minor
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.RefData:
derived_from: tosca.datatypes.Root
type: org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.RefDataSequence
description: Network Policy ref data sequence
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.ref.data.IpamSubnet:
derived_from: tosca.datatypes.Root
type: string
description: Network ipam refs data ipam subnets ip prefix len
required: false
- status: SUPPORTED
+ status: supported
network_ipam_refs_data_ipam_subnets_subnet_ip_prefix:
type: string
description: Network ipam refs data ipam subnets ip prefix
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.ref.data.IpamSubnetList:
derived_from: tosca.datatypes.Root
type: org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.ref.data.IpamSubnet
description: Network ipam refs data ipam subnets
required: false
- status: SUPPORTED
+ status: supported
network_ipam_refs_data_ipam_subnets_addr_from_start:
type: string
description: Network ipam refs data ipam subnets addr from start
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.IpamRefData:
derived_from: tosca.datatypes.Root
type: list
description: Network ipam refs data ipam subnets
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.virtual.network.rule.ref.data.IpamSubnetList
type: string
description: Source addresses Virtual network
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.network.rule.DstVirtualNetwork:
derived_from: tosca.datatypes.Root
type: string
description: Destination addresses Virtual network
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.network.rule.DstPortPairs:
derived_from: tosca.datatypes.Root
type: string
description: Start port
required: false
- status: SUPPORTED
+ status: supported
network_policy_entries_policy_rule_dst_ports_end_port:
type: string
description: End port
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.network.rule.SrcPortPairs:
derived_from: tosca.datatypes.Root
type: string
description: Start port
required: false
- status: SUPPORTED
+ status: supported
network_policy_entries_policy_rule_src_ports_end_port:
type: string
description: End port
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.network.rule.ActionList:
derived_from: tosca.datatypes.Root
type: string
description: Simple Action
required: false
- status: SUPPORTED
+ status: supported
network_policy_entries_policy_rule_action_list_apply_service:
type: list
description: Apply Service
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: string
type: list
description: Destination addresses
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.network.rule.DstVirtualNetwork
network_policy_entries_policy_rule_dst_ports:
type: list
description: Destination ports
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.network.rule.DstPortPairs
network_policy_entries_policy_rule_protocol:
type: string
description: Protocol
required: false
- status: SUPPORTED
+ status: supported
network_policy_entries_policy_rule_src_addresses:
type: list
description: Source addresses
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.network.rule.SrcVirtualNetwork
network_policy_entries_policy_rule_direction:
type: string
description: Direction
required: false
- status: SUPPORTED
+ status: supported
network_policy_entries_policy_rule_src_ports:
type: list
description: Source ports
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.network.rule.SrcPortPairs
network_policy_entries_policy_rule_action_list:
type: org.openecomp.datatypes.heat.contrailV2.network.rule.ActionList
description: Action list
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.network.rule.RuleList:
derived_from: tosca.datatypes.Root
type: list
description: Contrail network rule
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.network.rule.Rule
type: string
description: Route prefix
required: false
- status: SUPPORTED
+ status: supported
next_hop:
type: string
description: Next hop
required: false
- status: SUPPORTED
+ status: supported
next_hop_type:
type: string
description: Next hop type
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.network.contrail.AddressPair:
derived_from: tosca.datatypes.Root
type: string
description: Address mode active-active or active-standy
required: false
- status: SUPPORTED
+ status: supported
constraints:
- valid_values:
- active-active
type: string
description: IP address prefix
required: false
- status: SUPPORTED
+ status: supported
mac_address:
type: string
description: Mac address
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.network.contrail.InterfaceData:
derived_from: tosca.datatypes.Root
type: list
description: An ordered list of static routes to be added to this interface
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.network.contrail.port.StaticRoute
virtual_network:
type: string
description: Virtual Network for this interface
required: true
- status: SUPPORTED
+ status: supported
allowed_address_pairs:
type: list
description: List of allowed address pair for this interface
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.network.contrail.AddressPair
ip_address:
type: string
description: IP for this interface
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.machine.interface.Properties:
derived_from: tosca.datatypes.Root
type: string
description: Service Interface Type.
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.Root:
derived_from: tosca.datatypes.Root
supplemental_data:
type: map
entry_schema:
- description: >
+ description: >
A placeholder for missing properties that would be included in future ecomp model versions.
fromat <key>:<value>
type: string
count:
description: number of assignments required
type: integer
- required: false
-
+ required: false
+
org.openecomp.datatypes.network.SubnetAssignments:
derived_from: org.openecomp.datatypes.Root
properties:
ip_network_address_plan:
type: string
required: false
- description: Reference to EIPAM, VLAN or other address plan ID used to assign subnets to this network
+ description: Reference to EIPAM, VLAN or other address plan ID used to assign subnets to this network
dhcp_enabled:
type: boolean
required: false
cidr_mask:
type: integer
required: true
- description: The default subnet CIDR mask
+ description: The default subnet CIDR mask
min_subnets_count:
type: integer
default: 1
is_trunked:
type: boolean
required: true
- description: \"true\" indicates that network is trunked
+ description: \"true\" indicates that network is trunked
default: false
org.openecomp.datatypes.network.ProviderNetwork:
is_provider_network:
type: boolean
required: true
- description: \"true\" indicates that this a Neutron provider type of network
+ description: \"true\" indicates that this a Neutron provider type of network
physical_network_name:
type: string
required: false
type: string
description: IP Prefix.
required: false
- status: SUPPORTED
+ status: supported
ip_prefix_len:
type: integer
description: IP Prefix Len.
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.machine.subInterface.MacAddress:
derived_from: tosca.datatypes.Root
type: list
description: Mac Addresses List.
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: string
type: string
description: Sub Interface VLAN Tag.
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.machine.subInterface.AddressPair:
derived_from: tosca.datatypes.Root
type: string
description: Address Mode.
required: false
- status: SUPPORTED
+ status: supported
ip:
type: org.openecomp.datatypes.heat.contrailV2.virtual.machine.subInterface.AddressPairIp
description: IP.
required: false
- status: SUPPORTED
+ status: supported
mac:
type: string
description: Mac.
required: false
- status: SUPPORTED
+ status: supported
org.openecomp.datatypes.heat.contrailV2.virtual.machine.subInterface.AddressPairs:
derived_from: tosca.datatypes.Root
type: list
description: Addresses pair List.
required: false
- status: SUPPORTED
+ status: supported
entry_schema:
type: org.openecomp.datatypes.heat.contrailV2.virtual.machine.subInterface.AddressPair
type: string
description: The network role of the related network, sharing provider network.
required: false
-
-#ONAP types
+
+#ONAP types
+tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties:
+ derived_from: tosca.datatypes.Root
+ description: VnfcAdditionalConfigurableProperties type is an empty base type for deriving data types for describing additional configurable properties for a given VNFC.
+ # below description properties added as optional, since atleast one property required to define a dataType in SDC
+ properties:
+ description:
+ type: string
+ required: false
tosca.datatypes.nfv.VnfcConfigurableProperties:
derived_from: tosca.datatypes.Root
+ description: Defines the configurable properties of a VNFC
properties:
additional_vnfc_configurable_properties:
- type: map
- entry_schema:
- type: string
+ type: tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties
+ description: Describes additional configuration for VNFC that can be modified using the ModifyVnfInfo operation
required: false
+ # derived types are expected to introduce
+ # additional_vnfc_configurable_properties with its type derived from
+ # tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties
tosca.datatypes.nfv.RequestedAdditionalCapability:
derived_from: tosca.datatypes.Root
+ description: describes requested additional capability for a particular VDU
properties:
- #name:
- # key of containing map
+ requested_additional_capability_name:
+ type: string
+ description: Identifies a requested additional capability for the VDU.
+ required: true
support_mandatory:
type: boolean
+ description: Indicates whether the requested additional capability is mandatory for successful operation.
required: true
min_requested_additional_capability_version:
type: string
+ description: Identifies the minimum version of the requested additional capability.
required: false
preferred_requested_additional_capability_version:
type: string
+ description: Identifies the preferred version of the requested additional capability.
required: false
- requested_additional_capability_name:
- type: string
- required: true
target_performance_parameters:
type: map
+ description: Identifies specific attributes, dependent on the requested additional capability type.
+ required: true
entry_schema:
type: string
- required: true
tosca.datatypes.nfv.VirtualMemory:
- derived_from: tosca.datatypes.Root
- properties:
- # Number
- virtual_mem_size:
- type: scalar-unit.size
- required: true
- virtual_mem_oversubscription_policy:
+ derived_from: tosca.datatypes.Root
+ description: supports the specification of requirements related to virtual memory of a virtual compute resource
+ properties:
+ virtual_mem_size:
+ type: scalar-unit.size
+ description: Amount of virtual memory.
+ required: true
+ virtual_mem_oversubscription_policy:
+ type: string
+ description: The memory core oversubscription policy in terms of virtual memory to physical memory on the platform.
+ required: false
+ vdu_mem_requirements:
+ type: map
+ description: The hardware platform specific VDU memory requirements. A map of strings that contains a set of key-value pairs that describes hardware platform specific VDU memory requirements.
+ required: false
+ entry_schema:
type: string
- required: false
- vdu_memory_requirements:
- type: map
- entry_schema:
- type: string
- required: false
- numa_enabled:
- type: boolean
- required: false
+ numa_enabled:
+ type: boolean
+ description: It specifies the memory allocation to be cognisant of the relevant process/core allocation.
+ required: false
+ default: false
tosca.datatypes.nfv.VirtualCpuPinning:
derived_from: tosca.datatypes.Root
+ description: Supports the specification of requirements related to the virtual CPU pinning configuration of a virtual compute resource
properties:
- cpu_pinning_policy:
- type: string # CpuPinningPolicy
+ virtual_cpu_pinning_policy:
+ type: string
+ description: 'Indicates the policy for CPU pinning. The policy can take values of "static" or "dynamic". In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements). In case of "static" the allocation is requested to be according to the virtual_cpu_pinning_rule.'
+ required: false
constraints:
- valid_values: [ static, dynamic ]
+ virtual_cpu_pinning_rule:
+ type: list
+ description: Provides the list of rules for allocating virtual CPU cores to logical CPU cores/threads
required: false
- cpu_pinning_map:
- type: map
entry_schema:
type: string
- required: false
tosca.datatypes.nfv.VirtualCpu:
derived_from: tosca.datatypes.Root
+ description: Supports the specification of requirements related to virtual CPU(s) of a virtual compute resource
properties:
cpu_architecture:
type: string
+ description: CPU architecture type. Examples are x86, ARM
required: false
num_virtual_cpu:
type: integer
+ description: Number of virtual CPUs
required: true
+ constraints:
+ - greater_than: 0
virtual_cpu_clock:
type: scalar-unit.frequency
+ description: Minimum virtual CPU clock rate
required: false
virtual_cpu_oversubscription_policy:
type: string
+ description: CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads.
required: false
vdu_cpu_requirements:
type: map
+ description: The hardware platform specific VDU CPU requirements. A map of strings that contains a set of key-value pairs describing VDU CPU specific hardware platform requirements.
+ required: false
entry_schema:
type: string
- required: false
virtual_cpu_pinning:
type: tosca.datatypes.nfv.VirtualCpuPinning
+ description: The virtual CPU pinning configuration for the virtualised compute resource.
required: false
tosca.datatypes.nfv.LogicalNodeData:
derived_from: tosca.datatypes.Root
+ description: Describes compute, memory and I/O requirements associated with a particular VDU.
properties:
logical_node_requirements:
- type: map # not defined in SOL001 v.6.0
+ type: map
+ description: The logical node-level compute, memory and I/O requirements. A map of strings that contains a set of key-value pairs that describes hardware platform specific deployment requirements, including the number of CPU cores on this logical node, a memory configuration specific to a logical node or a requirement related to the association of an I/O device with the logical node.
+ required: false
entry_schema:
type: string
- required: false
tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements:
derived_from: tosca.datatypes.Root
- properties:
- name:
+ description: Describes requirements on a virtual network interface
+ properties:
+ name:
type: string
- required: false
- description:
+ description: Provides a human readable name for the requirement.
+ required: false
+ description:
type: string
+ description: Provides a human readable description of the requirement.
required: false
support_mandatory:
type: boolean
+ description: Indicates whether fulfilling the constraint is mandatory (TRUE) for successful operation or desirable (FALSE).
required: true
- requirement:
- type: string # not specified
- required: false
network_interface_requirements:
type: map
+ description: The network interface requirements. A map of strings that contain a set of key-value pairs that describes the hardware platform specific network interface deployment requirements.
+ required: true
entry_schema:
type: string
- required: true
nic_io_requirements:
type: tosca.datatypes.nfv.LogicalNodeData
+ description: references (couples) the CP with any logical node I/O requirements (for network devices) that may have been created. Linking these attributes is necessary so that so that I/O requirements that need to be articulated at the logical node level can be associated with the network interface requirements associated with the CP.
required: false
+
tosca.datatypes.nfv.injectFile: #used for vCPE usecase
derived_from: tosca.datatypes.Root
- properties:
+ properties:
source_path:
type: string
required: true
required: true
tosca.datatypes.nfv.L2AddressData:
derived_from: tosca.datatypes.Root
+ description: Describes the information on the MAC addresses to be assigned to a connection point.
properties:
- mac_address_assignment:
+ mac_address_assignment:
type: boolean
+ description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
- address:
- type: string
- required: false
tosca.datatypes.nfv.L3AddressData:
derived_from: tosca.datatypes.Root
- properties:
- ip_address_assignment:
+ description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP
+ properties:
+ ip_address_assignment:
type: boolean
+ description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
- floating_ip_activated:
+ floating_ip_activated:
type: boolean
+ description: Specifies if the floating IP scheme is activated on the Connection Point or not
required: true
ip_address_type:
type: string
+ description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp
required: false
constraints:
- - valid_values: [ipv4, ipv6]
+ - valid_values: [ ipv4, ipv6 ]
number_of_ip_address:
type: integer
+ description: Minimum number of IP addresses to be assigned
required: false
- fixed_ip_address: #used for vCPE usecase
+ constraints:
+ - greater_than: 0
+ fixed_ip_address: #Introduced from Beijing release, only used for vCPE usecase
type: list
entry_schema:
type: string
required: false
tosca.datatypes.nfv.AddressData:
- properties:
- address_type:
- constraints:
- - valid_values: [mac_address, ip_address]
+ derived_from: tosca.datatypes.Root
+ description: Describes information about the addressing scheme and parameters applicable to a CP
+ properties:
+ address_type:
type: string
+ description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point
required: true
- l2_address_data:
- required: false
+ constraints:
+ - valid_values: [ mac_address, ip_address ]
+ l2_address_data:
type: tosca.datatypes.nfv.L2AddressData
- l3_address_data:
+ description: Provides the information on the MAC addresses to be assigned to a connection point.
required: false
+ l3_address_data:
type: tosca.datatypes.nfv.L3AddressData
+ description: Provides the information on the IP addresses to be assigned to a connection point
+ required: false
tosca.datatypes.nfv.ConnectivityType:
derived_from: tosca.datatypes.Root
- properties:
- layer_protocol:
- type: string
+ description: describes additional connectivity information of a virtualLink
+ properties:
+ layer_protocols:
+ type: list
+ description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.
required: true
- constraints:
- - valid_values: [ethernet, mpls, odu2, ipv4, ipv6, pseudo_wire]
- flow_pattern:
+ entry_schema:
+ type: string
+ constraints:
+ - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
+ flow_pattern:
type: string
+ description: Identifies the flow pattern of the connectivity
required: false
- constraints: # not defined in IFA011 v2.4.1 and SOL001 v.6.0
- - valid_values: [Line, Tree, Mesh]
+ constraints:
+ - valid_values: [ line, tree, mesh ]
tosca.datatypes.nfv.VlFlavour:
derived_from: tosca.datatypes.Root
properties:
type: string
tosca.datatypes.nfv.ext.AddressPairs:
properties:
- ip:
+ ip:
type: string
required: false
- mac:
+ mac:
type: string
required: false
tosca.datatypes.nfv.ext.FloatingIP:
properties:
- external_network:
+ external_network:
type: string
required: false
- ip_address:
+ ip_address:
type: string
required: false
tosca.datatypes.nfv.ext.LocationInfo:
properties:
- availability_zone:
+ availability_zone:
type: string
required: false
- vimid:
+ vimid:
type: integer
required: false
- tenant:
+ tenant:
type: string
required: false
tosca.datatypes.nfv.ext.HostRouteInfo:
properties:
- destination:
+ destination:
type: string
required: false
- nexthop:
+ nexthop:
type: string
required: false
tosca.datatypes.nfv.ext.InjectData:
properties:
- file_name:
+ file_name:
type: string
required: false
- file_data:
+ file_data:
type: string
required: false
tosca.datatypes.nfv.ext.zte.WatchDog:
properties:
- enable_delay:
+ enable_delay:
type: integer
required: false
- action:
+ action:
type: string
required: false
tosca.datatypes.nfv.ext.LocalAffinityOrAntiAffinityRule:
properties:
- scope:
+ scope:
type: string
required: false
- affinity_antiaffinity:
+ affinity_antiaffinity:
type: string
required: false
tosca.datatypes.nfv.VduProfile:
derived_from: tosca.datatypes.Root
+ description: describes additional instantiation data for a given Vdu.Compute used in a specific deployment flavour.
properties:
min_number_of_instances:
type: integer
+ description: Minimum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour.
required: true
+ constraints:
+ - greater_or_equal: 0
max_number_of_instances:
type: integer
+ description: Maximum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour.
required: true
- #localAffinityOrAntiAffinityRule: # not defined in SOL001 v.6.0
- # type: tosca.datatypes.nfv.LocalAffinityOrAntiAffinityRule
- # required: true
- #affinityOrAntiAffinityGroupId: # not defined in SOL001 v.6.0
- # type: string
- # required: true
- watchdog: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+ constraints:
+ - greater_or_equal: 0
+ watchdog: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1
type: string
required: true
- vmBootUpTimeOut: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+ vmBootUpTimeOut: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1
type: integer
required: false
-tosca.datatypes.nfv.LinkBitRateRequirements:
+tosca.datatypes.nfv.LinkBitrateRequirements:
derived_from: tosca.datatypes.Root
+ description: describes the requirements in terms of bitrate for a virtual link
properties:
root:
- type: integer
+ type: integer # in bits per second
+ description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).
required: true
+ constraints:
+ - greater_or_equal: 0
leaf:
- type: integer
- required: true
+ type: integer # in bits per second
+ description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches).
+ required: false
+ constraints:
+ - greater_or_equal: 0
tosca.datatypes.nfv.Qos:
derived_from: tosca.datatypes.Root
+ description: describes QoS data for a given VL used in a VNF deployment flavour
properties:
latency:
- type: integer #Number [ms]
+ type: scalar-unit.time #Number [ms]
+ description: Specifies the maximum latency
required: true
+ constraints:
+ - greater_than: 0 s
packet_delay_variation:
- type: integer #Number [ms]
+ type: scalar-unit.time #Number [ms]
+ description: Specifies the maximum jitter
required: true
+ constraints:
+ - greater_or_equal: 0 s
packet_loss_ratio:
type: float #Number [0 ..1]
+ description: Specifies the maximum packet loss ratio
+ required: false
constraints:
- in_range: [ 0.0, 1.0 ]
- required: false
-tosca.datatypes.nfv.VlProfile:
+
+tosca.datatypes.nfv.IpAllocationPool:
derived_from: tosca.datatypes.Root
+ description: Specifies a range of IP addresses
properties:
- max_bit_rate_requirements:
- type: tosca.datatypes.nfv.LinkBitRateRequirements
+ start_ip_address:
+ type: string
+ description: The IP address to be used as the first one in a pool of addresses derived from the cidr block full IP range
required: true
- min_bit_rate_requirements:
- type: tosca.datatypes.nfv.LinkBitRateRequirements
+ end_ip_address:
+ type: string
+ description: The IP address to be used as the last one in a pool of addresses derived from the cidr block full IP range
required: true
- qos:
- type: tosca.datatypes.nfv.Qos
- required: false
- initiationParameters: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
- type: map
- entry_schema:
- type: string
- required: false
- cidr: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+tosca.datatypes.nfv.L2ProtocolData:
+ derived_from: tosca.datatypes.Root
+ description: describes L2 protocol data for a given virtual link used in a specific VNF deployment flavour.
+ properties:
+ name:
type: string
+ description: Identifies the network name associated with this L2 protocol.
required: false
- networkName: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+ network_type:
type: string
+ description: Specifies the network type for this L2 protocol.The value may be overridden at run-time.
required: false
- startIp: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
- type: string
+ constraints:
+ - valid_values: [ flat, vlan, vxlan, gre ]
+ vlan_transparent:
+ type: boolean
+ description: Specifies whether to support VLAN transparency for this L2 protocol or not.
+ required: false
+ default: false
+ mtu:
+ type: integer
+ description: Specifies the maximum transmission unit (MTU) value for this L2 protocol.
+ required: false
+ constraints:
+ - greater_than: 0
+ segmentation_id: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1
+ type: integer
required: false
- endIp: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+ physical_network: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1
type: string
required: false
- gatewayIp: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+tosca.datatypes.nfv.L3ProtocolData:
+ derived_from: tosca.datatypes.Root
+ description: describes L3 protocol data for a given virtual link used in a specific VNF deployment flavour.
+ properties:
+ name:
type: string
+ description: Identifies the network name associated with this L3 protocol.
required: false
- segmentationId: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
- type: integer
+ ip_version:
+ type: string
+ description: Specifies IP version of this L3 protocol.The value of the ip_version property shall be consistent with the value of the layer_protocol in the connectivity_type property of the virtual link node.
+ required: true
+ constraints:
+ - valid_values: [ ipv4, ipv6 ]
+ cidr:
+ type: string
+ description: Specifies the CIDR (Classless Inter-Domain Routing) of this L3 protocol. The value may be overridden at run-time.
+ required: true
+ ip_allocation_pools:
+ type: list
+ description: Specifies the allocation pools with start and end IP addresses for this L3 protocol. The value may be overridden at run-time.
required: false
- physicalNetwork: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+ entry_schema:
+ type: tosca.datatypes.nfv.IpAllocationPool
+ gateway_ip:
type: string
+ description: Specifies the gateway IP address for this L3 protocol. The value may be overridden at run-time.
+ required: false
+ dhcp_enabled:
+ type: boolean
+ description: Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. The value may be overridden at run-time.
required: false
- networkType: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
+ ipv6_address_mode:
type: string
+ description: Specifies IPv6 address mode. May be present when the value of the ipVersion attribute is "ipv6" and shall be absent otherwise. The value may be overridden at run-time.
required: false
constraints:
- - valid_values: [VLAN, VXLAN]
- dhcpEnabled: # not defined in IFA011 v2.4.1 and SOL001 v.6.0
- type: boolean
+ - valid_values: [ slaac, dhcpv6-stateful, dhcpv6-stateless ]
+tosca.datatypes.nfv.VirtualLinkProtocolData:
+ derived_from: tosca.datatypes.Root
+ description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour
+ properties:
+ associated_layer_protocol:
+ type: string
+ description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property.
+ required: true
+ constraints:
+ - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
+ l2_protocol_data:
+ type: tosca.datatypes.nfv.L2ProtocolData
+ description: Specifies the L2 protocol data for a virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise.
+ required: false
+ l3_protocol_data:
+ type: tosca.datatypes.nfv.L3ProtocolData
+ description: Specifies the L3 protocol data for this virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise.
+ required: false
+
+tosca.datatypes.nfv.VlProfile:
+ derived_from: tosca.datatypes.Root
+ description: Describes additional instantiation data for a given VL used in a specific VNF deployment flavour.
+ properties:
+ max_bitrate_requirements:
+ type: tosca.datatypes.nfv.LinkBitrateRequirements
+ description: Specifies the maximum bitrate requirements for a VL instantiated according to this profile.
+ required: true
+ min_bitrate_requirements:
+ type: tosca.datatypes.nfv.LinkBitrateRequirements
+ description: Specifies the minimum bitrate requirements for a VL instantiated according to this profile.
+ required: true
+ qos:
+ type: tosca.datatypes.nfv.Qos
+ description: Specifies the QoS requirements of a VL instantiated according to this profile.
required: false
- vlanTransparent: #Align with ONAP R2 IM. not defined in IFA011 v2.4.1 and SOL001 v.6.0
- type: boolean
+ virtual_link_protocol_data:
+ type: list
+ description: Specifies the protocol data for a virtual link.
required: false
+ entry_schema:
+ type: tosca.datatypes.nfv.VirtualLinkProtocolData
tosca.datatypes.nfv.VduLevel:
derived_from: tosca.datatypes.Root
+ description: Indicates for a given Vdu.Compute in a given level the number of instances to deploy
properties:
number_of_instances:
type: integer
+ description: Number of instances of VNFC based on this VDU to deploy for this level.
required: true
+ constraints:
+ - greater_or_equal: 0
tosca.datatypes.nfv.ScaleInfo:
derived_from: tosca.datatypes.Root
+ description: Indicates for a given scaleAspect the corresponding scaleLevel
properties:
- scaleLevel:
+ scale_level:
type: integer
+ description: The scale level for a particular aspect
required: true
-tosca.datatypes.nfv.ScaleAspect:
+ constraints:
+ - greater_or_equal: 0
+tosca.datatypes.nfv.ScalingAspect:
derived_from: tosca.datatypes.Root
properties:
name:
description:
type: string
required: true
- associated_group:
- type: string #Identifier
- required: false
max_scale_level:
- type: integer #PositiveInteger
+ type: integer # positiveInteger
required: true
+ constraints:
+ - greater_or_equal: 0
+ step_deltas:
+ type: list
+ required: false
+ entry_schema:
+ type: string # Identifier
tosca.datatypes.nfv.InstantiationLevel:
derived_from: tosca.datatypes.Root
+ description: Describes the scale level for each aspect that corresponds to a given level of resources to be instantiated within a deployment flavour in term of the number VNFC instances
properties:
description:
type: string
+ description: Human readable description of the level
required: true
- vdu_levels:
- type: map # key: vduId
- required: true
- entry_schema:
- type: tosca.datatypes.nfv.VduLevel
scale_info:
type: map # key: aspectId
+ description: Represents for each aspect the scale level that corresponds to this instantiation level. scale_info shall be present if the VNF supports scaling.
required: false
entry_schema:
type: tosca.datatypes.nfv.ScaleInfo
-#tosca.datatypes.nfv.VnfInstantiateOperationConfiguration:
-# derived_from: tosca.datatypes.Root
- #properties:
- #parameters:
- #modeled as part of operation parameter list
+
+tosca.datatypes.nfv.VnfInstantiateOperationConfiguration:
+ derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the InstantiateVnf operation.
+ properties:
+ description:
+ type: string
+ required: false
tosca.datatypes.nfv.VnfScaleOperationConfiguration:
derived_from: tosca.datatypes.Root
+ description: Represents information that affect the invocation of the ScaleVnf operation
properties:
- #parameters:
- #modeled as part of the operation parameter list
scaling_by_more_than_one_step_supported:
type: boolean
+ description: Signals whether passing a value larger than one in the numScalingSteps parameter of the ScaleVnf operation is supported by this VNF.
+ required: false
+ default: false
tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration:
derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the ScaleVnfToLevel operation
properties:
- #parameters:
- #modeled as part of the operation parameter list
arbitrary_target_levels_supported:
type: boolean
+ description: Signals whether scaling according to the parameter "scaleInfo" is supported by this VNF
+ required: true
tosca.datatypes.nfv.VnfHealOperationConfiguration:
derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the HealVnf operation
properties:
- #parameters:
- #modeled as part of the operation parameter list
causes:
type: list
+ description: Supported "cause" parameter values
+ required: false
entry_schema:
type: string
tosca.datatypes.nfv.VnfTerminateOperationConfiguration:
derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the TerminateVnf
properties:
min_graceful_termination_timeout:
- type: integer
+ type: scalar-unit.time # For TOSCA V1.2 use type as scalar-unit.time instead of integer
+ description: Minimum timeout value for graceful termination of a VNF instance
+ required: true
max_recommended_graceful_termination_timeout:
- type: integer
+ type: scalar-unit.time # For TOSCA V1.2 use type as scalar-unit.time instead of integer
+ description: Maximum recommended timeout value that can be needed to gracefully terminate a VNF instance of a particular type under certain conditions, such as maximum load condition. This is provided by VNF provider as information for the operator facilitating the selection of optimal timeout value. This value is not used as constraint
+ required: false
tosca.datatypes.nfv.VnfOperateOperationConfiguration:
derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the OperateVnf operation
properties:
- min_graceful_termination_timeout:
- type: integer
- max_recommended_graceful_termination_timeout:
- type: integer
-tosca.datatypes.nfv.VnfLcmOperationsConfiguration:
+ min_graceful_stop_timeout:
+ type: scalar-unit.time
+ description: Minimum timeout value for graceful stop of a VNF instance
+ required: true
+ max_recommended_graceful_stop_timeout:
+ type: scalar-unit.time
+ description: Maximum recommended timeout value that can be needed to gracefully stop a VNF instance of a particular type under certain conditions, such as maximum load condition. This is provided by VNF provider as information for the operator facilitating the selection of optimal timeout value. This value is not used as constraint
+ required: false
+tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration:
derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the ChangeVnfFlavour operation
properties:
-# instantiate:
-# type: tosca.datatypes.nfv.VnfInstantiateOperationConfiguration
- scale:
- type: tosca.datatypes.nfv.VnfScaleOperationConfiguration
- scale_to_level:
- type: tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration
- heal:
- type: tosca.datatypes.nfv.VnfHealOperationConfiguration
- terminate:
- type: tosca.datatypes.nfv.VnfTerminateOperationConfiguration
- operate:
- type: tosca.datatypes.nfv.VnfOperateOperationConfiguration
-tosca.datatypes.nfv.CpProtocolData:
+ description:
+ type: string
+ required: false
+tosca.datatypes.nfv.VnfProfile:
derived_from: tosca.datatypes.Root
+ description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF.
properties:
- asscociated_layer_protocol:
+ instantiation_level:
type: string
+ description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used.
+ required: false
+ min_number_of_instances:
+ type: integer
+ description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.
+ required: true
constraints:
- - valid_values: [ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
+ - greater_or_equal: 0
+ max_number_of_instances:
+ type: integer
+ description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.
required: true
- address_data:
- type: tosca.datatypes.nfv.AddressData
- required: false
-#tosca.datatypes.nfv.VnfAdditionalConfigurableProperties:
-# derived_from: tosca.datatypes.Root
-tosca.datatypes.nfv.VnfConfigurableProperties:
+ constraints:
+ - greater_or_equal: 0
+tosca.datatypes.nfv.UriAuthority:
derived_from: tosca.datatypes.Root
+ description: information that corresponds to the authority component of a URI as specified in IETF RFC 3986 [8]
properties:
- is_autoscale_enabled:
- type: boolean
+ user_info:
+ type: string # shall comply with IETF RFC 3986
+ description: user_info field of the authority component of a URI
required: false
- is_autoheal_enabled:
- type: boolean
+ host:
+ type: string # shall comply with IETF RFC 3986
+ description: host field of the authority component of a URI
required: false
-# additional_configurable_properties:
-# type: tosca.datatypes.nfv.VnfAdditionalConfigurableProperties
-# required: false
-tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions:
- derived_from: tosca.datatypes.Root
- properties:
- description:
- type: string
+ port:
+ type: string # shall comply with IETF RFC 3986
+ description: port field of the authority component of a URI
required: false
-tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata:
+tosca.datatypes.nfv.UriComponents:
derived_from: tosca.datatypes.Root
+ description: information used to build a URI that complies with IETF RFC 3986 [8].
properties:
- description:
- type: string
+ scheme:
+ type: string # shall comply with IETF RFC3986
+ description: scheme component of a URI.
+ required: true
+ authority:
+ type: tosca.datatypes.nfv.UriAuthority
+ description: Authority component of a URI
required: false
-tosca.datatypes.nfv.VnfInfoModifiableAttributes:
+ path:
+ type: string # shall comply with IETF RFC 3986
+ description: path component of a URI.
+ required: false
+ query:
+ type: string # shall comply with IETF RFC 3986
+ description: query component of a URI.
+ required: false
+ fragment:
+ type: string # shall comply with IETF RFC 3986
+ description: fragment component of a URI.
+ required: false
+tosca.datatypes.nfv.InterfaceDetails:
derived_from: tosca.datatypes.Root
+ description: information used to access an interface exposed by a VNF
properties:
- extensions:
- type: tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions
+ uri_components:
+ type: tosca.datatypes.nfv.UriComponents
+ description: Provides components to build a Uniform Ressource Identifier (URI) where to access the interface end point.
required: false
- metadata:
- type: tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata
+ interface_specific_data:
+ type: map
+ description: Provides additional details that are specific to the type of interface considered.
required: false
-
-### Data types used by Policy TCA model for closed loop ###
-
-onap.datatypes.monitoring.metricsPerEventName:
+ entry_schema:
+ type: string
+tosca.datatypes.nfv.VirtualLinkMonitoringParameter:
derived_from: tosca.datatypes.Root
+ description: Represents information on virtualised resource related performance metrics applicable to the VNF.
properties:
- controlLoopSchemaType:
- constraints:
- - valid_values:
- - VM
- - VNF
- description: "Specifies Control Loop Schema Type for the event Name e.g. VNF, VM"
+ name:
+ type: string
+ description: Human readable name of the monitoring parameter
required: true
+ performance_metric:
type: string
- eventName:
+ description: Identifies a performance metric derived from those defined in ETSI GS NFV-IFA 027.The packetOutgoingVirtualLink and packetIncomingVirtualLink metrics shall be obtained by aggregation the PacketOutgoing and PacketIncoming measurements defined in clause 7.1 of GS NFV-IFA 027 of all virtual link ports attached to the virtual link to which the metrics apply.
+ required: true
+ constraints:
+ - valid_values: [ packet_outgoing_virtual_link, packet_incoming_virtual_link ]
+ collection_period:
+ type: scalar-unit.time
+ description: Describes the recommended periodicity at which to collect the performance information.
+ required: false
+ constraints:
+ - greater_than: 0 s
+tosca.datatypes.nfv.VnfcMonitoringParameter:
+ derived_from: tosca.datatypes.Root
+ description: Represents information on virtualised resource related performance metrics applicable to the VNF.
+ properties:
+ name:
+ type: string
+ description: Human readable name of the monitoring parameter
+ required: true
+ performance_metric:
+ type: string
+ description: Identifies the performance metric, according to ETSI GS NFV-IFA 027.
+ required: true
+ constraints:
+ - valid_values: [ v_cpu_usage_mean_vnf, v_cpu_usage_peak_vnf, v_memory_usage_mean_vnf, v_memory_usage_peak_vnf, v_disk_usage_mean_vnf, v_disk_usage_peak_vnf, byte_incoming_vnf_int_cp, byte_outgoing_vnf_int_cp, packet_incoming_vnf_int_cp, packet_outgoing_vnf_int_cp ]
+ collection_period:
+ type: scalar-unit.time
+ description: Describes the recommended periodicity at which to collect the performance information.
+ required: false
+ constraints:
+ - greater_than: 0 s
+tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration:
+ derived_from: tosca.datatypes.Root
+ description: represents information that affect the invocation of the ChangeExtVnfConnectivity operation
+ properties:
+ description:
+ type: string
+ required: false
+tosca.datatypes.nfv.VnfMonitoringParameter:
+ derived_from: tosca.datatypes.Root
+ description: Represents information on virtualised resource related performance metrics applicable to the VNF.
+ properties:
+ name:
+ type: string
+ description: Human readable name of the monitoring parameter
+ required: true
+ performance_metric:
+ type: string
+ description: Identifies the performance metric, according to ETSI GS NFV-IFA 027.
+ required: true
+ constraints:
+ - valid_values: [ v_cpu_usage_mean_vnf, v_cpu_usage_peak_vnf, v_memory_usage_mean_vnf, v_memory_usage_peak_vnf, v_disk_usage_mean_vnf, v_disk_usage_peak_vnf, byte_incoming_vnf_ext_cp, byte_outgoing_vnf_ext_cp, packet_incoming_vnf_ext_cp, packet_outgoing_vnf_ext_cp ]
+ collection_period:
+ type: scalar-unit.time
+ description: Describes the recommended periodicity at which to collect the performance information.
+ required: false
+ constraints:
+ - greater_than: 0 s
+tosca.datatypes.nfv.VnfLcmOperationsConfiguration:
+ derived_from: tosca.datatypes.Root
+ description: Represents information to configure lifecycle management operations
+ properties:
+ instantiate:
+ type: tosca.datatypes.nfv.VnfInstantiateOperationConfiguration
+ description: Configuration parameters for the InstantiateVnf operation
+ required: false
+ scale:
+ type: tosca.datatypes.nfv.VnfScaleOperationConfiguration
+ description: Configuration parameters for the ScaleVnf operation
+ required: false
+ scale_to_level:
+ type: tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration
+ description: Configuration parameters for the ScaleVnfToLevel operation
+ required: false
+ change_flavour:
+ type: tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration
+ description: Configuration parameters for the changeVnfFlavourOpConfig operation
+ required: false
+ heal:
+ type: tosca.datatypes.nfv.VnfHealOperationConfiguration
+ description: Configuration parameters for the HealVnf operation
+ required: false
+ terminate:
+ type: tosca.datatypes.nfv.VnfTerminateOperationConfiguration
+ description: Configuration parameters for the TerminateVnf operation
+ required: false
+ operate:
+ type: tosca.datatypes.nfv.VnfOperateOperationConfiguration
+ description: Configuration parameters for the OperateVnf operation
+ required: false
+ change_ext_connectivity:
+ type: tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration
+ description: Configuration parameters for the changeExtVnfConnectivityOpConfig operation
+ required: false
+tosca.datatypes.nfv.CpProtocolData:
+ derived_from: tosca.datatypes.Root
+ description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information
+ properties:
+ associated_layer_protocol:
+ type: string
+ required: true
+ description: One of the values of the property layer_protocols of the CP
+ constraints:
+ - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
+ address_data:
+ type: list
+ description: Provides information on the addresses to be assigned to the CP
+ entry_schema:
+ type: tosca.datatypes.nfv.AddressData
+ required: false
+tosca.datatypes.nfv.VnfAdditionalConfigurableProperties:
+ derived_from: tosca.datatypes.Root
+ description: is an empty base type for deriving data types for describing additional configurable properties for a given VNF
+ # below description properties added as optional, since atleast one property required to define a dataType in SDC
+ properties:
+ description:
+ type: string
+ required: false
+tosca.datatypes.nfv.VnfConfigurableProperties:
+ derived_from: tosca.datatypes.Root
+ description: indicates configuration properties for a given VNF (e.g. related to auto scaling and auto healing).
+ properties:
+ is_autoscale_enabled:
+ type: boolean
+ description: It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality. If the properties is not present for configuring, then VNF property is not supported
+ required: false
+ is_autoheal_enabled:
+ type: boolean
+ description: It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality. If the properties is not present for configuring, then VNF property is not supported
+ required: false
+ additional_configurable_properties:
+ description: It provides VNF specific configurable properties that can be modified using the ModifyVnfInfo operation
+ required: false
+ type: tosca.datatypes.nfv.VnfAdditionalConfigurableProperties
+ # derived types are expected to introduce
+ # additional_configurable_properties with its type derived from
+ # tosca.datatypes.nfv.VnfAdditionalConfigurableProperties
+tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions:
+ derived_from: tosca.datatypes.Root
+ description: is an empty base type for deriving data types for describing VNF-specific extension
+ # below description properties added as optional, since atleast one property required to define a dataType in SDC
+ properties:
+ description:
+ type: string
+ required: false
+tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata:
+ derived_from: tosca.datatypes.Root
+ description: is an empty base type for deriving data types for describing VNF-specific metadata
+ # below description properties added as optional, since atleast one property required to define a dataType in SDC
+ properties:
+ description:
+ type: string
+ required: false
+tosca.datatypes.nfv.VnfInfoModifiableAttributes:
+ derived_from: tosca.datatypes.Root
+ description: Describes VNF-specific extension and metadata for a given VNF
+ properties:
+ extensions:
+ type: tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions
+ description: \"Extension\" properties of VnfInfo that are writeable
+ required: false
+ # derived types are expected to introduce
+ # extensions with its type derived from
+ # tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions
+ metadata:
+ type: tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata
+ description: \"Metadata\" properties of VnfInfo that are writeable
+ required: false
+ # derived types are expected to introduce
+ # metadata with its type derived from
+ # tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata
+
+tosca.datatypes.nfv.VirtualLinkBitrateLevel:
+ derived_from: tosca.datatypes.Root
+ description: Describes bitrate requirements applicable to the virtual link instantiated from a particicular VnfVirtualLink
+ properties:
+ description:
+ type: string
+ required: false
+ bitrate_requirements:
+ type: tosca.datatypes.nfv.LinkBitrateRequirements
+ description: Virtual link bitrate requirements for an instantiation level or bitrate delta for a scaling step
+ required: true
+
+tosca.datatypes.nfv.VnfOperationAdditionalParameters:
+ derived_from: tosca.datatypes.Root
+ description: Is an empty base type for deriving data type for describing VNF-specific parameters to be passed when invoking lifecycle management operations
+ # below description properties added as optional, since atleast one property required to define a dataType in SDC
+ properties:
+ description:
+ type: string
+ required: false
+tosca.datatypes.nfv.VirtualFileStorageData:
+ derived_from: tosca.datatypes.Root
+ description: VirtualFileStorageData describes file storage requirements associated with compute resources in a particular VDU
+ properties:
+ size_of_storage:
+ type: scalar-unit.size
+ description: Size of virtualized storage resource
+ required: true
+ file_system_protocol:
+ type: string
+ description: The shared file system protocol (e.g. NFS, CIFS)
+ required: true
+tosca.datatypes.nfv.VirtualObjectStorageData:
+ derived_from: tosca.datatypes.Root
+ description: VirtualObjectStorageData describes object storage requirements associated with compute resources in a particular VDU
+ properties:
+ max_size_of_storage:
+ type: scalar-unit.size
+ description: Maximum size of virtualized storage resource
+ required: false
+tosca.datatypes.nfv.VirtualBlockStorageData:
+ derived_from: tosca.datatypes.Root
+ description: VirtualBlockStorageData describes block storage requirements associated with compute resources in a particular VDU, either as a local disk or as virtual attached storage
+ properties:
+ size_of_storage:
+ type: scalar-unit.size
+ description: Size of virtualised storage resource
+ required: true
+ vdu_storage_requirements:
+ type: map
+ description: The hardware platform specific storage requirements. A map of strings that contains a set of key-value pairs that represents the hardware platform specific storage deployment requirements.
+ required: false
+ entry_schema:
+ type: string
+ rdma_enabled:
+ type: boolean
+ description: Indicates if the storage support RDMA
+ required: false
+ default: false
+tosca.datatypes.nfv.SwImageData:
+ derived_from: tosca.datatypes.Root
+ description: describes information related to a software image artifact
+ properties: # in SOL001 v0.8.0: "properties or metadata:"
+ name:
+ type: string
+ description: Name of this software image
+ required: true
+ version:
+ type: string
+ description: Version of this software image
+ required: true
+ checksum:
+ type: string
+ description: Checksum of the software image file
+ required: true
+ container_format:
+ type: string
+ description: The container format describes the container file format in which software image is provided
+ required: true
+ constraints:
+ - valid_values: [ aki, ami, ari, bare, docker, ova, ovf ]
+ disk_format:
+ type: string
+ description: The disk format of a software image is the format of the underlying disk image
+ required: true
+ constraints:
+ - valid_values: [ aki, ami, ari, iso, qcow2, raw, vdi, vhd, vhdx, vmdk ]
+ min_disk:
+ type: scalar-unit.size # Number
+ description: The minimal disk size requirement for this software image
+ required: true
+ min_ram:
+ type: scalar-unit.size # Number
+ description: The minimal RAM requirement for this software image
+ required: false
+ size:
+ type: scalar-unit.size # Number
+ description: The size of this software image
+ required: true
+ operating_system:
+ type: string
+ description: Identifies the operating system used in the software image
+ required: false
+ supported_virtualisation_environments:
+ type: list
+ description: Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image
+ required: false
+ entry_schema:
+ type: string
+
+### Data types used by Policy PM Mapper for closed loop ###
+
+onap.datatypes.monitoring.pm-mapper-filter:
+ derived_from: tosca.datatypes.Root
+ properties:
+ filters:
+ type: list
+ description: Filter configuration
+ default: []
+ required: true
+ entry_schema:
+ type: onap.datatypes.monitoring.filters
+
+onap.datatypes.monitoring.filters:
+ derived_from: tosca.datatypes.Root
+ properties:
+ pmDefVsn:
+ type: string
+ description: PM Dictionary version
+ required: true
+ nfType:
+ type: string
+ description: NF type
+ required: true
+ vendor:
+ type: string
+ description: Vendor name
+ required: true
+ measTypes:
+ type: list
+ description: Measurement types to collect
+ default: []
+ required: true
+ entry_schema:
+ type: string
+
+### Data types used by Policy PM Subscription Handler for closed loop ###
+
+onap.datatypes.monitoring.subscription:
+ derived_from: tosca.datatypes.Root
+ properties:
+ subscriptionName:
+ type: string
+ description: Name of the subscription
+ required: true
+ administrativeState:
+ type: string
+ description: State of the subscription
+ required: true
+ constraints:
+ - valid_values:
+ - LOCKED
+ - UNLOCKED
+ fileBasedGP:
+ type: integer
+ description: File based granularity period
+ required: true
+ fileLocation:
+ type: string
+ description: ROP file location
+ required: true
+ nfTypeModelInvariantId:
+ type: string
+ description: Network function invariant ID
+ required: true
+ nfFilter:
+ type: map
+ description: Network function filter
+ required: true
+ entry_schema:
+ type: onap.datatypes.monitoring.nfFilter
+ measurementGroups:
+ type: list
+ description: Measurement Groups
+ required: true
+ entry_schema:
+ type: onap.datatypes.monitoring.measurementGroups
+
+onap.datatypes.monitoring.nfFilter:
+ derived_from: tosca.datatypes.Root
+ properties:
+ nfNames:
+ type: list
+ description: List of network functions
+ required: true
+ default: []
+ entry_schema:
+ type: string
+ swVersions:
+ type: list
+ description: List of software versions
+ required: true
+ default: []
+ entry_schema:
+ type: string
+
+onap.datatypes.monitoring.measurementGroups:
+ derived_from: tosca.datatypes.Root
+ properties:
+ measurementGroup:
+ type: map
+ description: Measurement Group
+ required: true
+ entry_schema:
+ type: onap.datatypes.monitoring.measurementGroup
+
+onap.datatypes.monitoring.MeasurementGroup:
+ derived_from: tosca.datatypes.Root
+ properties:
+ measurementTypes:
+ type: list
+ description: List of measurement types
+ required: true
+ default: []
+ entry_schema:
+ type: onap.datatypes.monitoring.measurementTypes
+ managedObjectDNsBasic:
+ type: list
+ description: List of managed object distinguished names
+ required: true
+ default: []
+ entry_schema:
+ type: onap.datatypes.monitoring.managedObjectDNSBasics
+
+onap.datatypes.monitoring.measurementTypes:
+ derived_from: tosca.datatypes.Root
+ properties:
+ measurementType:
+ type: map
+ description: Measurement type object
+ required: true
+ entry_schema:
+ type: onap.dataypes.monitoring.measurementType
+
+onap.datatypes.monitoring.measurementType:
+ derived_from: tosca.datatypes.Root
+ properties:
+ measurementType:
+ type: string
+ description: Measurement type
+ required: true
+
+onap.datatypes.monitoring.managedObjectDNsBasics:
+ derived_from: tosca.datatypes.Root
+ properties:
+ managedObjectDNsBasic:
+ type: map
+ description: Managed object distinguished name object
+ required: true
+ entry_schema:
+ type: onap.dataypes.monitoring.managedObjectDNsBasic
+
+onap.datatypes.monitoring.managedObjectDNsBasic:
+ derived_from: tosca.datatypes.Root
+ properties:
+ DN:
+ type: string
+ description: Managed object distinguished name
+ required: true
+
+### Data types used by Policy TCA model for closed loop ###
+
+onap.datatypes.monitoring.metricsPerEventName:
+ derived_from: tosca.datatypes.Root
+ properties:
+ controlLoopSchemaType:
+ constraints:
+ - valid_values:
+ - VM
+ - VNF
+ description: "Specifies Control Loop Schema Type for the event Name e.g. VNF, VM"
+ required: true
+ type: string
+ eventName:
description: "Event name to which thresholds need to be applied"
required: true
type: string
type: onap.datatypes.monitoring.thresholds
required: true
type: list
+
onap.datatypes.monitoring.tca_policy:
derived_from: tosca.datatypes.Root
properties:
type: onap.datatypes.monitoring.metricsPerEventName
required: true
type: list
+
onap.datatypes.monitoring.thresholds:
derived_from: tosca.datatypes.Root
properties:
description: "Version number associated with the threshold"
required: true
type: string
+
+### Data types used by Policy Restconf Collector ###
+
+onap.datatypes.monitoring.rcc_policy:
+ derived_from: tosca.datatypes.Root
+ properties:
+ controller_name:
+ type: string
+ description: Name of controller
+ required: true
+ controller_restapiUrl:
+ type: string
+ description: Controller's ip and port
+ required: true
+ controller_restapiUser:
+ type: string
+ description: Controller's username
+ required: true
+ controller_restapiPassword:
+ type: string
+ description: Controller's password
+ required: true
+ controller_accessTokenUrl:
+ type: string
+ description: URL to get access token
+ required: true
+ controller_accessTokenFile:
+ type: string
+ description: Access token file path
+ required: true
+ controller_accessTokenMethod:
+ type: string
+ description: Access token method POST/GET/PUT etc
+ required: true
+ constraints:
+ - valid_values: [ post, get, put]
+ controller_subsMethod:
+ type: string
+ description: Subscription method POST/GET/PUT etc
+ required: true
+ default: post
+ constraints:
+ - valid_values: [ post, get, put]
+ controller_subscriptionUrl:
+ type: string
+ description: URL to establish subscription
+ required: true
+ controller_disableSsl:
+ type: boolean
+ description: Option to disable ssl
+ required: true
+ default: true
+ event_details:
+ type: list
+ description: event details
+ required: true
+ entry_schema:
+ type : onap.datatypes.monitoring.rcc_event_details
+
+onap.datatypes.monitoring.rcc_event_details:
+ derived_from: tosca.datatypes.Root
+ properties:
+ event_name:
+ type: string
+ description: event name
+ required: true
+ event_description:
+ type: string
+ description: description of event
+ required: false
+ event_sseventUrlEmbed:
+ type: boolean
+ description: Whether SSE url is embedded in subscription response
+ required: true
+ default: true
+ event_sseventsField:
+ type: string
+ description: Field name to access SSE url in subscription response
+ required: true
+ event_sseventsUrl:
+ type: string
+ description: Explicit SSE url
+ required: true
+ event_subscriptionTemplate:
+ type: string
+ description: Subscription template file path
+ required: true
+ event_unSubscriptionTemplate:
+ type: string
+ description: Unsubscription template file path
+ required: false
+ event_ruleId:
+ type: integer
+ description: Rule Id
+ required: false
+ modifyData:
+ type: boolean
+ description: Whether to modify the received SSE event
+ required: true
+ default: false
+ modifyMethod:
+ type: string
+ description: The java method name to modify data
+ required: false
+ userData:
+ type: string
+ description: The user specific data
+ required: false
+
+##### Partner service domain datatypes ######
+
+onap.datatypes.partner.access_details:
+ derived_from: tosca.datatypes.Root
+ properties:
+ addressId:
+ type: string
+ description: id of the site
+ required: true
+ dsl_stability_profile:
+ type: string
+ description: profile of stability
+ required: false
+ default: standard
+ constraints:
+ - valid_values:
+ - standard
+ - stable
+ partner_priorty_assist:
+ type: boolean
+ description: assistance flag
+ required: false
+ default: true
+ battery_backup:
+ type: boolean
+ description: backup requirement flag
+ required: false
+ default: true
+ central_splitter:
+ type: boolean
+ description: applicable to FTTN service
+ required: false
+ default: true
+ service_restoration_sla:
+ type: string
+ description: This is the service restoration SLA from an partner perspective.
+ required: false
+ default: Standard
+ constraints:
+ - valid_values:
+ - Standard
+ - Enhanced
+
+onap.datatypes.partner.bandwidth:
+ derived_from: tosca.datatypes.Root
+ properties:
+ bandwidth_type:
+ type: string
+ description: type of bandwidth
+ required: true
+ default: standard
+ constraints:
+ - valid_values:
+ - standard
+ - guaranteed
+ downstream:
+ type: string
+ description: down speed
+ required: true
+ constraints:
+ - valid_values:
+ - 128
+ - 512
+ - 1
+ - 2
+ - 5
+ - 10
+ - 20
+ - 25
+ - 30
+ - 40
+ - 50
+ - 100
+ - 250
+ - 500
+ - 1000
+ upstream:
+ type: string
+ description: up speed
+ required: false
+ constraints:
+ - valid_values:
+ - 128
+ - 512
+ - 1
+ - 2
+ - 5
+ - 10
+ - 20
+ - 25
+ - 30
+ - 40
+ - 50
+ - 100
+ - 250
+ - 500
+ - 1000
+ units:
+ type: string
+ description: unit of speed
+ required: true
+ constraints:
+ - valid_values:
+ - k
+ - M
+ service_alias:
+ type: string
+ description: 16 digit id
+ required: false
+
+onap.datatypes.partner.service_details:
+ derived_from: tosca.datatypes.Root
+ properties:
+ bandwidth:
+ type: onap.datatypes.partner.bandwidth
+ description: bandwidth details for access
+ required: false
+ line_of_business:
+ type: string
+ description: LOB
+ required: false
+ constraints:
+ - valid_values:
+ - CONSUMER
+ - WHOLESALE
+ - BUSINESS
+ access_details:
+ type: onap.datatypes.partner.access_details
+ required: false
+
+onap.datatypes.partner.sppartner_details:
+ derived_from: tosca.datatypes.Root
+ properties:
+ partner_url:
+ type: string
+ description: Partner URL to access and provision the service
+ required: false
+ uuid:
+ type: string
+ description: UUID of the service definition defined in the partner catalog
+ required: false
+ auth_user:
+ type: string
+ description: Authentication details to access the Service URL
+ required: false
+ auth_password:
+ type: string
+ description: Authentication details to access the Service URL
+ required: false
Code Review / sdc.git / blobdiff