#!/bin/bash
+#############################################################################
+#
+# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#############################################################################
+
+
+
+
+################################## start of vm_init #####################################
+
+set -ex
+
+# add well-known DCAE hostname aliases
+echo "$(cat /opt/config/dcae_ip_addr.txt) consul" >>/etc/hosts
+echo "$(cat /opt/config/dcae_ip_addr.txt) dockerhost" >>/etc/hosts
+
+
+URL_ROOT='nexus.onap.org/service/local/repositories/raw/content'
+REPO_BLUEPRINTS='org.onap.dcaegen2.platform.blueprints'
+REPO_DEPLOYMENTS='org.onap.dcaegen2.deployments'
+if [ -e /opt/config/dcae_deployment_profile.txt ]; then
+ DEPLOYMENT_PROFILE=$(cat /opt/config/dcae_deployment_profile.txt)
+fi
+DEPLOYMENT_PROFILE=${DEPLOYMENT_PROFILE:-R3}
NEXUS_USER=$(cat /opt/config/nexus_username.txt)
NEXUS_PASSWORD=$(cat /opt/config/nexus_password.txt)
NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt)
DOCKER_VERSION=$(cat /opt/config/docker_version.txt)
-ZONE=$(cat /opt/config/dcae_zone.txt)
-docker login -u $NEXUS_USER -p $NEXUS_PASSWORD $NEXUS_DOCKER_REPO
-docker pull $NEXUS_DOCKER_REPO/onap/org.onap.dcaegen2.deployments.bootstrap:$DOCKER_VERSION
-docker run -v /opt/config/priv_key:/opt/app/installer/config/key -v /opt/app/inputs.yaml:/opt/app/installer/config/inputs.yaml -e "LOCATION=$ZONE" $NEXUS_DOCKER_REPO/onap/org.onap.dcaegen2.deployments.bootstrap:$DOCKER_VERSION
\ No newline at end of file
+MYFLOATIP=$(cat /opt/config/dcae_float_ip.txt)
+MYLOCALIP=$(cat /opt/config/dcae_ip_addr.txt)
+HTTP_PROXY=$(cat /opt/config/http_proxy.txt)
+HTTPS_PROXY=$(cat /opt/config/https_proxy.txt)
+
+if [ $HTTP_PROXY != "no_proxy" ]
+then
+ export http_proxy=$HTTP_PROXY
+ export https_proxy=$HTTPS_PROXY
+fi
+
+
+docker login -u "$NEXUS_USER" -p "$NEXUS_PASSWORD" "$NEXUS_DOCKER_REPO"
+
+if [[ $DEPLOYMENT_PROFILE == R1* || $DEPLOYMENT_PROFILE == R2* ]]; then
+ echo "R1 and R2 deployment profiles are not supported in Casablanca Heat deployment"
+elif [[ $DEPLOYMENT_PROFILE == R3* ]]; then
+ RELEASE_TAG='R3'
+
+ set +e
+ rm -rf /opt/app/inputs-templates
+ mkdir -p /opt/app/inputs-templates
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-1.yaml
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-2.yaml
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-3.yaml
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/docker-compose-4.yaml
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/register.sh
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/setup.sh
+ wget -P /opt/app/inputs-templates https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/heat/teardown.sh
+
+ pip install --upgrade jinja2
+ wget https://${URL_ROOT}/${REPO_DEPLOYMENTS}/${RELEASE_TAG}/scripts/detemplate-bpinputs.py \
+ && \
+ (python detemplate-bpinputs.py /opt/config /opt/app/inputs-templates /opt/app/config; \
+ rm detemplate-bpinputs.py)
+
+ if [ -e /opt/app/config/register.sh ]; then
+ chmod +x /opt/app/config/register.sh
+ fi
+ if [ -e /opt/app/config/setup.sh ]; then
+ chmod +x /opt/app/config/setup.sh
+ fi
+ if [ -e /opt/app/config/build-plugins.sh ]; then
+ chmod +x /opt/app/config/build-plugins.sh
+ fi
+ set -e
+
+ cd /opt/app/config
+ # deploy essentials
+ /opt/docker/docker-compose -f docker-compose-1.yaml up -d
+
+ # wait for essentials to become ready
+ echo "Waiting for Consul to come up ready"
+ while ! nc -z localhost 8500; do sleep 1; done
+ echo "Waiting for Postgres DB to come up ready"
+ while ! nc -z localhost 5432; do sleep 1; done
+ echo "Waiting for CBS to come up ready"
+ while ! nc -z localhost 10000; do sleep 1; done
+ echo "All dependencies are up, proceed to the next phase"
+ sleep 30
+
+ echo "Setup CloudifyManager and Registrator"
+ ./setup.sh
+ sleep 10
+
+ export http_proxy=""
+ export https_proxy=""
+
+ ./register.sh
+
+ echo "Bring up DCAE MIN service components for R2 use cases"
+ /opt/docker/docker-compose -f docker-compose-2.yaml up -d
+
+ if [[ "$DEPLOYMENT_PROFILE" == "R3" || "$DEPLOYMENT_PROFILE" == "R3PLUS" ]]; then
+ echo "Bring up DCAE platform components"
+ /opt/docker/docker-compose -f docker-compose-3.yaml up -d
+
+ if [[ "$DEPLOYMENT_PROFILE" == "R3PLUS" ]]; then
+ echo "Bring up additional (plus) DCAE service components"
+ /opt/docker/docker-compose -f docker-compose-4.yaml up -d
+ fi
+ fi
+
+ # start proxy for consul's health check
+ CONSULIP=$(cat /opt/config/dcae_ip_addr.txt)
+ echo "Consul is available at $CONSULIP"
+fi
+
+cat >./nginx.conf <<EOL
+server {
+ listen 80;
+ server_name dcae.simpledemo.onap.org;
+ root /www/healthcheck;
+
+ location /healthcheck {
+ try_files /services.yaml =404;
+ }
+ location /R3MIN{
+ try_files /r3mvp_healthy.yaml =404;
+ }
+ location /R3 {
+ try_files /r3_healthy.yaml =404;
+ }
+ location /R3PLUS {
+ try_files /r3plus_healthy.yaml =404;
+ }
+}
+EOL
+
+HEALTHPORT=8000
+docker run -d \
+--name dcae-health \
+-p ${HEALTHPORT}:80 \
+-v "$(pwd)/nginx.conf:/etc/nginx/conf.d/default.conf" \
+-v "/tmp/healthcheck:/www/healthcheck" \
+--label "SERVICE_80_NAME=dcae-health" \
+--label "SERVICE_80_CHECK_HTTP=/healthcheck" \
+--label "SERVICE_80_CHECK_INTERVAL=15s" \
+--label "SERVICE_80_CHECK_INITIAL_STATUS=passing" \
+ nginx
+
+echo "Healthcheck API available at http://${MYFLOATIP}:${HEALTHPORT}/healthcheck"
+echo " http://${MYFLOATIP}:${HEALTHPORT}/R3"
+echo " http://${MYFLOATIP}:${HEALTHPORT}/R3MIN"
+echo " http://${MYFLOATIP}:${HEALTHPORT}/R3PLUS"
+
+# run forever for updating health status based on consul
+set +e
+while :
+do
+ rm -rf /tmp/healthcheck/*
+ # all registered services
+ SERVICES=$(curl -s http://consul:8500/v1/agent/services |jq '. | to_entries[] | .value.Service')
+ # passing services
+ SERVICES=$(curl -s http://consul:8500/v1/health/state/passing | jq '.[] | .ServiceName')
+
+ # remove empty lines/entries
+ SERVICES=$(echo "$SERVICES" | sed '/^\s*\"\"\s*$/d' |sed '/^\s*$/d')
+
+ SERVICES_JSON=$(echo "$SERVICES" | sed 's/\"$/\",/g' | sed '$ s/.$//')
+
+ echo "$(date): running healthy services:"
+ echo ">>> $SERVICES"
+ PLT_CONSUL=$(echo "$SERVICES" |grep "consul")
+ PLT_CBS=$(echo "$SERVICES" |grep "config_binding_service")
+ MVP_PG_HOLMES=$(echo "$SERVICES" |grep "pgHolmes")
+ MVP_VES=$(echo "$SERVICES" |grep "mvp.*ves")
+ MVP_TCA=$(echo "$SERVICES" |grep "mvp.*tca")
+ MVP_HR=$(echo "$SERVICES" |grep "mvp.*holmes-rule")
+ MVP_HE=$(echo "$SERVICES" |grep "mvp.*holmes-engine")
+
+ PLT_CM=$(echo "$SERVICES" |grep "cloudify.*manager")
+ PLT_DH=$(echo "$SERVICES" |grep "deployment.*handler")
+ PLT_PH=$(echo "$SERVICES" |grep "policy.*handler")
+ PLT_SCH=$(echo "$SERVICES" |grep "service.*change.*handler")
+ PLT_INV=$(echo "$SERVICES" |grep "inventory")
+ PLT_PG_INVENTORY=$(echo "$SERVICES" |grep "pgInventory")
+
+ PLUS_MHB=$(echo "$SERVICES" |grep "heartbeat")
+ PLUS_PRH=$(echo "$SERVICES" |grep "prh")
+ PLUS_MPR=$(echo "$SERVICES" |grep "mapper")
+ PLUS_TRAP=$(echo "$SERVICES" |grep "snmptrap")
+
+ DATA="{\"healthy\" : \"$(date)\", \"healthy_services\": [${SERVICES_JSON}]}"
+ if [[ -n "$PLT_CONSUL" && -n "$PLT_CBS" && -n "$MVP_PG_HOLMES" && -n "$MVP_VES" && \
+ -n "$MVP_TCA" ]]; then
+ echo "${DATA}" > /tmp/healthcheck/r3mvp_healthy.yaml
+ echo "${DATA}" > /tmp/healthcheck/services.yaml
+ echo ">>>>>> enough services satisfying R3MIN service deployment"
+ else
+ echo ">>>>>> not enough services satisfying R3MIN service deployment"
+ fi
+
+ if [[ -n "$PLT_CONSUL" && -n "$PLT_CBS" && -n "$PLT_CM" && -n "$PLT_DH" && \
+ -n "$PLT_PH" && -n "$PLT_SCH" && -n "$PLT_INV" && -n "$PLT_PG_INVENTORY" ]]; then
+ echo ">>>>>> enough services satisfying R3 platform deployment"
+ echo "${DATA}" > /tmp/healthcheck/r3_healthy.yaml
+
+ if [[ -n "$PLUS_MHB" && -n "$PLUS_PRH" && -n "$PLUS_MPR" && -n "$PLUS_TRAP" && -n "$MVP_HR" && -n "$MVP_HE" ]]; then
+ echo ">>>>>> enough services satisfying R3PLUS deployment"
+ echo "${DATA}" > /tmp/healthcheck/r3plus_healthy.yaml
+ else
+ echo ">>>>>> not enough services satisfying R3PLUS service deployment"
+ fi
+ else
+ echo ">>>>>> not enough services satisfying R3 platform or R3PLUS service deployment"
+ fi
+
+ sleep 60
+done
+
Code Review / demo.git / blobdiff