--- /dev/null
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+data_types:
+
+ tosca.datatypes.nfv.L2AddressData:
+ # TBD
+ _extensions:
+ shorthand_name: L2AddressData
+ type_qualified_name: tosca:L2AddressData
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.1
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896055'
+
+ tosca.datatypes.nfv.L3AddressData:
+ _extensions:
+ shorthand_name: L3AddressData
+ type_qualified_name: tosca:L3AddressData
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.2
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896056'
+ description: >-
+ The L3AddressData type is a complex TOSCA data type used to describe L3AddressData information
+ element as defined in [ETSI GS NFV-IFA 011], it provides the information on the IP addresses
+ to be assigned to the connection point instantiated from the parent Connection Point
+ Descriptor.
+ derived_from: tosca.datatypes.Root
+ properties:
+ ip_address_assignment:
+ description: >-
+ Specify if the address assignment is the responsibility of management and orchestration
+ function or not. If it is set to True, it is the management and orchestration function
+ responsibility.
+ type: boolean
+ required: true
+ floating_ip_activated:
+ description: Specify if the floating IP scheme is activated on the Connection Point or not.
+ type: boolean
+ required: true
+ ip_address_type:
+ description: >-
+ Define address type. The address type should be aligned with the address type supported by
+ the layer_protocol properties of the parent VnfExtCpd.
+ type: string
+ required: false
+ constraints:
+ - valid_values: [ ipv4, ipv6 ]
+ number_of_ip_address:
+ description: >-
+ Minimum number of IP addresses to be assigned.
+ type: integer
+ required: false
+
+ tosca.datatypes.nfv.AddressData:
+ _extensions:
+ shorthand_name: AddressData
+ type_qualified_name: tosca:AddressData
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.3
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896057'
+ description: >-
+ The AddressData type is a complex TOSCA data type used to describe AddressData information
+ element as defined in [ETSI GS NFV-IFA 011], it provides information on the addresses to be
+ assigned to the connection point(s) instantiated from a Connection Point Descriptor.
+ derived_from: tosca.datatypes.Root
+ properties:
+ address_type:
+ description: >-
+ Describes the type of the address to be assigned to the connection point instantiated from
+ the parent Connection Point Descriptor. The content type shall be aligned with the address
+ type supported by the layerProtocol property of the parent Connection Point Descriptor.
+ type: string
+ required: true
+ constraints:
+ - valid_values: [ mac_address, ip_address ]
+ l2_address_data:
+ # Shall be present when the addressType is mac_address.
+ description: >-
+ Provides the information on the MAC addresses to be assigned to the connection point(s)
+ instantiated from the parent Connection Point Descriptor.
+ type: tosca.datatypes.nfv.L2AddressData # Empty in "GS NFV IFA011 V0.7.3"
+ required: false
+ l3_address_data:
+ # Shall be present when the addressType is ip_address.
+ description: >-
+ Provides the information on the IP addresses to be assigned to the connection point
+ instantiated from the parent Connection Point Descriptor.
+ type: tosca.datatypes.nfv.L3AddressData
+ required: false
+
+ tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements:
+ _extensions:
+ shorthand_name: VirtualNetworkInterfaceRequirements
+ type_qualified_name: tosca:VirtualNetworkInterfaceRequirements
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.4
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896058'
+ description: >-
+ The VirtualNetworkInterfaceRequirements type is a complex TOSCA data type used to describe
+ VirtualNetworkInterfaceRequirements information element as defined in [ETSI GS NFV-IFA 011],
+ it provides the information to specify requirements on a virtual network interface realising the
+ CPs instantiated from this CPD.
+ derived_from: tosca.datatypes.Root
+ properties:
+ name:
+ description: >-
+ Provides a human readable name for the requirement.
+ type: string
+ required: false
+ description:
+ description: >-
+ Provides a human readable description for the requirement.
+ type: string
+ required: false
+ support_mandatory:
+ description: >-
+ Indicates whether fulfilling the constraint is mandatory (TRUE) for successful operation
+ or desirable (FALSE).
+ type: boolean
+ required: false
+ requirement:
+ description: >-
+ Specifies a requirement such as the support of SR-IOV, a particular data plane
+ acceleration library, an API to be exposed by a NIC, etc.
+ type: string # ARIA NOTE: the spec says "not specified", but TOSCA requires a type
+ required: true
+
+ tosca.datatypes.nfv.ConnectivityType:
+ _extensions:
+ shorthand_name: ConnectivityType
+ type_qualified_name: tosca:ConnectivityType
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.5
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896059'
+ description: >-
+ The TOSCA ConnectivityType type is a complex TOSCA data type used to describe ConnectivityType
+ information element as defined in [ETSI GS NFV-IFA 011].
+ derived_from: tosca.datatypes.Root
+ properties:
+ layer_protocol:
+ description: >-
+ Identifies the protocol this VL gives access to (ethernet, mpls, odu2, ipv4, ipv6,
+ pseudo_wire).
+ type: string
+ required: true
+ constraints:
+ - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo_wire ]
+ flow_pattern:
+ description: >-
+ Identifies the flow pattern of the connectivity (Line, Tree, Mesh).
+ type: string
+ required: false
+
+ tosca.datatypes.nfv.RequestedAdditionalCapability:
+ _extensions:
+ shorthand_name: RequestedAdditionalCapability
+ type_qualified_name: tosca:RequestedAdditionalCapability
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.6
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896060'
+ description: >-
+ RequestAdditionalCapability describes additional capability for a particular VDU.
+ derived_from: tosca.datatypes.Root
+ properties:
+ request_additional_capability_name:
+ description: >-
+ Identifies a requested additional capability for the VDU.
+ type: string
+ required: true
+ support_mandatory:
+ description: >-
+ Indicates whether the requested additional capability is mandatory for successful
+ operation.
+ type: string
+ required: true
+ min_requested_additional_capability_version:
+ description: >-
+ Identifies the minimum version of the requested additional capability.
+ type: string
+ required: false
+ preferred_requested_additional_capability_version:
+ description: >-
+ Identifies the preferred version of the requested additional capability.
+ type: string
+ required: false
+ target_performance_parameters:
+ description: >-
+ Identifies specific attributes, dependent on the requested additional capability type.
+ type: map
+ entry_schema:
+ type: string
+ required: true
+
+ tosca.datatypes.nfv.VirtualMemory:
+ _extensions:
+ shorthand_name: VirtualMemory
+ type_qualified_name: tosca:VirtualMemory
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.7
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896061'
+ description: >-
+ VirtualMemory describes virtual memory for a particular VDU.
+ derived_from: tosca.datatypes.Root
+ properties:
+ virtual_mem_size:
+ description: Amount of virtual memory.
+ type: scalar-unit.size
+ required: true
+ virtual_mem_oversubscription_policy:
+ description: >-
+ The memory core oversubscription policy in terms of virtual memory to physical memory on
+ the platform. The cardinality can be 0 during the allocation request, if no particular
+ value is requested.
+ type: string
+ required: false
+ numa_enabled:
+ description: >-
+ It specifies the memory allocation to be cognisant of the relevant process/core
+ allocation. The cardinality can be 0 during the allocation request, if no particular value
+ is requested.
+ type: boolean
+ required: false
+
+ tosca.datatypes.nfv.VirtualCpu:
+ _extensions:
+ shorthand_name: VirtualCpu
+ type_qualified_name: tosca:VirtualCpu
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.8
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896062'
+ description: >-
+ VirtualMemory describes virtual memory for a particular VDU.
+ derived_from: tosca.datatypes.Root
+ properties:
+ cpu_architecture:
+ description: >-
+ CPU architecture type. Examples are x86, ARM.
+ type: string
+ required: false
+ num_virtual_cpu:
+ description: >-
+ Number of virtual CPUs.
+ type: integer
+ required: true
+ virtual_cpu_clock:
+ description: >-
+ Minimum virtual CPU clock rate.
+ type: scalar-unit.frequency
+ required: false
+ virtual_cpu_oversubscription_policy:
+ description: >-
+ CPU core oversubscription policy.
+ type: string
+ required: false
+ virtual_cpu_pinning:
+ description: >-
+ The virtual CPU pinning configuration for the virtualized compute resource.
+ type: tosca.datatypes.nfv.VirtualCpuPinning
+ required: false
+
+ tosca.datatypes.nfv.VirtualCpuPinning:
+ _extensions:
+ shorthand_name: VirtualCpuPinning
+ type_qualified_name: tosca:VirtualCpuPinning
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.9
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896064'
+ description: >-
+ VirtualCpuPinning describes CPU pinning configuration for a particular CPU.
+ derived_from: tosca.datatypes.Root
+ properties:
+ cpu_pinning_policy:
+ description: >-
+ Indicates the policy for CPU pinning.
+ type: string
+ constraints:
+ - valid_values: [ static, dynamic ]
+ required: false
+ cpu_pinning_map:
+ description: >-
+ If cpuPinningPolicy is defined as "static", the cpuPinningMap provides the map of pinning
+ virtual CPU cores to physical CPU cores/threads.
+ type: map
+ entry_schema:
+ type: string
+ required: false
+
+ tosca.datatypes.nfv.VnfcConfigurableProperties:
+ _extensions:
+ shorthand_name: VnfcconfigurableProperties
+ type_qualified_name: tosca:VnfcconfigurableProperties
+ specification: tosca-simple-nfv-1.0
+ specification_section: 5.3.10
+ specification_url: 'http://docs.oasis-open.org/tosca/tosca-nfv/v1.0/csd04/tosca-nfv-v1.0-csd04.html#_Toc482896065'
+ # ARIA NOTE: description is mangled in spec
+ description: >-
+ VnfcConfigurableProperties describes additional configurable properties of a VNFC.
+ derived_from: tosca.datatypes.Root
+ properties:
+ additional_vnfc_configurable_properties:
+ description: >-
+ Describes additional configuration for VNFC.
+ type: map
+ entry_schema:
+ type: string
+ required: false
Code Review / multicloud / azure.git / blobdiff