--- /dev/null
+#
+# Copyright (c) 2017 GigaSpaces Technologies Ltd. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+
+tosca_definitions_version: tosca_simple_yaml_1_0
+
+topology_template:
+ policies:
+ cloudify-aws-plugin:
+ description: >-
+ aws plugin executes operations.
+ type: aria.Plugin
+ properties:
+ version: 1.4.10
+
+
+data_types:
+ aria.aws.datatypes.Config:
+ properties:
+ # Partially based on: http://docs.aws.amazon.com/cli/latest/userguide/cli-chap-getting-started.html
+ aws_access_key_id:
+ description: >
+ The ID of your AWS ACCESS KEY.
+ type: string
+ required: false
+ aws_secret_access_key:
+ description: >
+ The ID of your AWS SECRET KEY.
+ type: string
+ required: false
+ region:
+ description: >
+ This is for backward compatibility with version 1.2.
+ type: string
+ required: false
+ ec2_region_name:
+ description: >
+ The EC2 Region RegionName, such as us-east-1.
+ (Not us-east-1b, which is an availability zone, or US East, which is a Region.)
+ type: string
+ required: false
+ ec2_region_endpoint:
+ description: >
+ The endpoint for the given region.
+ type: string
+ required: false
+ elb_region_name:
+ description: >
+ The ELB Region RegionName, such as us-east-1.
+ (Not us-east-1b, which is an availability zone, or US East, which is a Region.)
+ Required for aws_config for node type aria.aws.nodes.ElasticLoadBalancer.
+ type: string
+ required: false
+ elb_region_endpoint:
+ description: >
+ The endpoint for the given ELB region.
+ type: string
+ required: false
+
+ aria.aws.datatypes.Route:
+ properties:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/create-route.html
+ route_table_id:
+ description: >
+ In most cases, leave this blank, because the route table is implicit from the node or
+ relationship that is creating the route.
+ type: string
+ required: false
+ destination_cidr_block:
+ description: >
+ This is the cidr_block that you want to route traffic for to the device.
+ type: string
+ gateway_id:
+ description: >
+ The id of the gateway (either internet gateway, customer gateway, or vpn gateway).
+ type: string
+ required: false
+ instance_id:
+ description: >
+ The id of the instance (if you are routing to a NAT instance).
+ type: string
+ required: false
+ interface_id:
+ description: >
+ The id of an attached network interface.
+ type: string
+ required: false
+ vpc_peering_connection_id:
+ description: >
+ The id of a VPC peering connection.
+ type: string
+ required: false
+
+ aria.aws.datatypes.NetworkAclEntry:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/create-network-acl-entry.html
+ properties:
+ rule_number:
+ description: >
+ Some number to identify this rule. Cannot duplicate an existing rule number.
+ type: integer
+ protocol:
+ description: >
+ The Assigned Internet Protocol Number for the protocol (e.g. 1 is ICMP, 6 is TCP, and 17 is UDP).
+ type: integer
+ rule_action:
+ description: Either ALLOW or DENY.
+ type: string
+ constraints:
+ - valid_values: [ ALLOW, DENY ]
+ cidr_block:
+ description: >
+ The cidr_block.
+ type: string
+ egress:
+ description: >
+ Whether the rule applies to egress traffic from the subnet.
+ type: boolean
+ default: false
+ required: false
+ icmp_type:
+ description: >
+ If in protocol you chose 1 for ICMP, the ICMP type, -1 for all ICMP types.
+ type: integer
+ required: false
+ icmp_code:
+ description: >
+ If in protocol you chose 1 for ICMP, the ICMP code, -1 for all ICMP codes.
+ type: integer
+ required: false
+ port_range_from:
+ description: >
+ The first port in the range.
+ type: integer
+ constraints:
+ - in_range: [ 1, 65535 ]
+ port_range_to:
+ description: >
+ The last port in the range.
+ type: integer
+ constraints:
+ - in_range: [ 1, 65535 ]
+
+ aria.aws.datatypes.SecurityGroupRule:
+ # Based on: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-security-group-rule.html
+ properties:
+ egress:
+ description: >
+ Whether the rule applies to egress traffic.
+ type: boolean
+ default: false
+ required: false
+ ip_protocol:
+ description: >
+ The Assigned Internet Protocol Number for the protocol.
+ type: string
+ required: false
+ from_port:
+ description: >
+ The first port in the range.
+ type: integer
+ required: false
+ constraints:
+ - in_range: [ 1, 65535 ]
+ to_port:
+ description: >
+ The last port in the range.
+ type: integer
+ required: false
+ constraints:
+ - in_range: [ 1, 65535 ]
+ cidr_ip:
+ description: >
+ The cidr_block.
+ type: string
+ required: false
+ src_group_id:
+ description: >
+ The security group ID.
+ type: string
+ required: false
+
+ aria.aws.datatypes.BlockDeviceMapping:
+ derived_from: tosca.datatypes.Root
+ properties:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/run-instances.html#options
+ virtual_name:
+ type: string
+ required: false
+ device_name:
+ type: string
+ required: false
+ ebs:
+ type: aria.aws.datatypes.Ebs
+ required: false
+ no_device:
+ type: string
+ required: false
+
+ aria.aws.datatypes.Ebs:
+ derived_from: tosca.datatypes.Root
+ properties:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/run-instances.html#options
+ snapshot_id:
+ type: string
+ required: false
+ volume_size:
+ type: integer
+ required: false
+ delete_on_termination:
+ type: boolean
+ required: false
+ volume_type:
+ type: string
+ required: false
+ constraints:
+ - valid_values: [ standard, io1, gp2, sc1, st1]
+ required: false
+ iops:
+ type: integer
+ required: false
+ encrypted:
+ type: boolean
+ required: false
+
+ aria.aws.datatypes.NetworkInterfacePrivateIPAddress:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/create-network-interface.html
+ # Specifically, look under --private-ip-addresses, and notice the differences from
+ # --private-ip-address.
+ derived_from: tosca.datatypes.Root
+ properties:
+ private_ip_address:
+ type: string
+ required: false
+ primary:
+ type: boolean
+ required: false
+
+ aria.aws.datatypes.NetworkInterface:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/create-network-interface.html
+ derived_from: tosca.datatypes.Root
+ properties:
+ description:
+ type: string
+ required: false
+ dry_run:
+ type: boolean
+ required: false
+ groups:
+ type: list
+ entry_schema:
+ type: string
+ required: false
+ ipv6_address_count:
+ type: integer
+ required: false
+ ipv6_addresses:
+ type: map
+ entry_schema:
+ type: string
+ required: false
+ private_ip_address:
+ type: string
+ required: false
+ private_ip_addresses:
+ type: map
+ entry_schema:
+ type: aria.aws.datatypes.NetworkInterfacePrivateIPAddress
+ required: false
+ secondary_private_ip_address_count:
+ type: integer
+ required: false
+ subnet_id:
+ type: string
+ required: false
+ cli_input_json:
+ type: string
+ required: false
+ generate_cli_skeleton:
+ type: string
+ required: false
+
+ aria.aws.datatypes.RunInstancesParameters:
+ derived_from: tosca.datatypes.Root
+ properties:
+ # These properties were derived from the parameters of boto.e2c.connection.run_instances:
+ # https://github.com/boto/boto/blob/master/boto/ec2/connection.py#L738
+ # In the corresponding aws documentation,
+ # http://docs.aws.amazon.com/cli/latest/reference/ec2/run-instances.html,
+ # The properties 'placement', 'placement_group' and 'tenancy' of the boto api are part of a
+ # structure called 'placement', in addition to 'affinity' and 'host_id' which do not exist
+ # in the boto api.
+ image_id:
+ type: string
+ required: false
+ min_count:
+ type: integer
+ required: false
+ max_count:
+ type: integer
+ required: false
+ key_name:
+ type: string
+ required: false
+ security_groups:
+ type: list
+ entry_schema:
+ type: string
+ required: false
+ user_data:
+ type: string
+ required: false
+ addressing_type:
+ type: string
+ required: false
+ instance_type:
+ type: string
+ required: false
+ placement:
+ type: string
+ required: false
+ kernel_id:
+ type: string
+ required: false
+ ramdisk_id:
+ type: string
+ required: false
+ monitoring_enabled:
+ type: boolean
+ required: false
+ subnet_id:
+ type: string
+ required: false
+ block_device_map:
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.BlockDeviceMapping
+ required: false
+ disable_api_termination:
+ type: boolean
+ required: false
+ instance_initiated_shutdown_behavior:
+ type: string
+ constraints:
+ - valid_values: [ stop, terminate ]
+ required: false
+ private_id_address:
+ type: string
+ required: false
+ placement_group:
+ type: string
+ required: false
+ client_token:
+ type: string
+ required: false
+ security_group_ids:
+ type: list
+ entry_schema:
+ type: string
+ required: false
+ additional_info:
+ type: string
+ required: false
+ instance_profile_name:
+ type: string
+ required: false
+ instance_profile_arn:
+ type: string
+ required: false
+ tenancy:
+ type: string
+ required: false
+ constraints:
+ - valid_values: [ default, dedicated]
+ ebs_optimized:
+ type: boolean
+ required: false
+ network_interfaces:
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.NetworkInterface
+ required: false
+ dry_run:
+ type: boolean
+ required: false
+
+ aria.aws.datatypes.LoadBalancerListener:
+ # According to the description of the 'listeners' property of aria.aws.node.LoadBalancer
+ derived_from: tosca.datatypes.Root
+ properties:
+ LoadBalancerPortNumber:
+ type: integer
+ constraints:
+ - in_range: [ 1, 65535 ]
+ InstancePortNumber:
+ type: integer
+ constraints:
+ - in_range: [ 1, 65535 ]
+ protocol:
+ type: string
+ constraints:
+ - valid_values: [ tcp, ssl, http, https ]
+ SSLCertificateID:
+ type: string
+ required: false
+
+ aria.aws.datatypes.LoadBalancerComplexListener:
+ # According to the description of the 'complex_listeners' property of aria.aws.node.LoadBalancer
+ derived_from: aria.aws.datatypes.LoadBalancerListener
+ properties:
+ InstanceProtocol:
+ type: integer
+ constraints:
+ - in_range: [ 1, 65535 ]
+
+ aria.aws.datatypes.LoadBalancerHealthCheck:
+ # Based on: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb-health-check.html
+ derived_from: tosca.datatypes.Root
+ properties:
+ healthy_threshold:
+ type: string
+ required: false
+ interval:
+ type: string
+ required: false
+ target:
+ type: string
+ required: false
+ timeout:
+ type: string
+ required: false
+ unhealthy_threshold:
+ type: string
+ required: false
+
+ aria.aws.datatypes.NetworkInterfaceCreateParameters:
+ # These properties were derived from the parameters of boto.e2c.connection.create_network_interface
+ # https://github.com/boto/boto/blob/master/boto/ec2/connection.py#L4286, that are based on:
+ # http://docs.aws.amazon.com/cli/latest/reference/ec2/create-network-interface.html
+ derived_from: tosca.datatypes.Root
+ properties:
+ subnet_id:
+ type: string
+ required: false
+ private_ip_address:
+ type: string
+ required: false
+ description:
+ type: string
+ required: false
+ groups:
+ type: list
+ entry_schema:
+ type: string
+ required: false
+ dry_run:
+ type: boolean
+ required: false
+
+ aria.aws.datatypes.VolumeCreateParameters:
+ # Based on http://docs.aws.amazon.com/cli/latest/reference/ec2/create-volume.html#synopsis
+ derived_from: tosca.datatypes.Root
+ properties:
+ size:
+ type: integer
+ required: false
+ zone:
+ type: string
+ required: false
+ snapshot:
+ type: string
+ required: false
+ volume_type:
+ type: string
+ required: false
+ iops:
+ type: integer
+ required: false
+ encrypted:
+ type: boolean
+ required: false
+ kms_key_id:
+ type: string
+ required: false
+ dry_run:
+ type: boolean
+ required: false
+
+ aria.aws.datatypes.VolumeDeleteParameters:
+ # Based on: http://docs.aws.amazon.com/cli/latest/reference/ec2/delete-volume.html
+ derived_from: tosca.datatypes.Root
+ properties:
+ volume_id:
+ type: string
+ required: false
+ dry_run:
+ type: boolean
+ required: false
+
+interface_types:
+ aria.aws.interfaces.Validation:
+ derived_from: tosca.interfaces.Root
+ creation:
+ description: >
+ creation operation for the aws validation interface
+ aria.aws.interfaces.Snapshot:
+ derived_from: tosca.interfaces.Root
+ create:
+ description: >
+ creation operation for the aws snapshot interface
+
+
+node_types:
+ aria.aws.nodes.Instance:
+ derived_from: tosca.nodes.Compute
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ name:
+ description: >
+ Optional field if you want to add a specific name to the instance.
+ type: string
+ default: ''
+ required: false
+ image_id:
+ description: >
+ The ID of the AMI image in your Amazon account.
+ type: string
+ instance_type:
+ description: >
+ The instance's size.
+ type: string
+ use_password:
+ type: boolean
+ default: false
+ parameters:
+ description: >
+ The key value pair parameters allowed by Amazon API to the
+ ec2.connection.EC2Connection.run_instances command. It should be mentioned that
+ although this field is listed as optional, A non-trivial use case requires
+ that both the key_name parameter and the security_groups parameter be specified.
+ type: aria.aws.datatypes.RunInstancesParameters
+ default: {}
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ attributes:
+ public_ip_address:
+ type: string
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.instance.create
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.instance.start
+ inputs:
+ start_retry_interval:
+ description: Polling interval until the server is active in seconds
+ type: integer
+ default: 30
+ private_key_path:
+ description: >
+ Path to private key which matches the server's
+ public key. Will be used to decrypt password in case
+ the "use_password" property is set to "true"
+ type: string
+ default: ''
+ stop:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.instance.stop
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.instance.delete
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.instance.creation_validation
+ requirements:
+ - elastic_ip:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.ElasticIP
+ relationship: aria.aws.relationships.InstanceConnectedToElasticIP
+ occurrences: [ 0, UNBOUNDED ]
+ - keypair:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.KeyPair
+ relationship: aria.aws.relationships.InstanceConnectedToKeypair
+ occurrences: [ 0, UNBOUNDED ]
+ - security_group:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.SecurityGroup
+ relationship: aria.aws.relationships.instance_connected_to_security_group
+ occurrences: [ 0, UNBOUNDED ]
+ - load_balancer:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.ElasticLoadBalancer
+ relationship: aria.aws.relationships.InstanceConnectedToLoadBalancer
+ occurrences: [ 0, UNBOUNDED ]
+ - subnet_to_be_contained_in:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Subnet
+ relationship: aria.aws.relationships.InstanceContainedInSubnet
+ occurrences: [ 0, UNBOUNDED ]
+ - subnet_to_connect_to:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Subnet
+ relationship: aria.aws.relationships.InstanceConnectedToSubnet
+ occurrences: [ 0, UNBOUNDED ]
+ - eni:
+ capability: tosca.capabilities.Root
+ node: aria.aws.nodes.Interface
+ relationship: aria.aws.relationships.InstanceConnectedToENI
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.WindowsInstance:
+ derived_from: aria.aws.nodes.Instance
+ properties:
+ use_password:
+ type: boolean
+ default: true
+ os_family:
+ type: string
+ default: windows
+
+ aria.aws.nodes.ElasticIP:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ domain:
+ description: >
+ Set this to 'vpc' if you want to use VPC.
+ type: string
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticip.create
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticip.delete
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticip.creation_validation
+
+ aria.aws.nodes.SecurityGroup:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ description:
+ description: >
+ The description field that is required for every security group that you create
+ in Amazon.
+ type: string
+ rules:
+ description: >
+ You need to pass in either src_group_id (security group ID) OR cidr_ip,
+ and then the following three: ip_protocol, from_port and to_port.
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.SecurityGroupRule
+ default: []
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.securitygroup.create
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.securitygroup.start
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.securitygroup.delete
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.securitygroup.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.SecurityGroupContainedInVPC
+ occurrences: [ 0, UNBOUNDED ]
+ - security_group_rule:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.SecurityGroupRule
+ relationship: aria.aws.relationships.SecurityGroupUsesRule
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.Volume:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ size:
+ description: >
+ The size of the volume in GB.
+ type: string
+ zone:
+ description: >
+ A string representing the AWS availability zone.
+ type: string
+ device:
+ description: >
+ The device on the instance
+ type: string
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.create
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: aria.aws.datatypes.VolumeCreateParameters
+ default: {}
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.start
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.delete
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: aria.aws.datatypes.VolumeDeleteParameters
+ default: {}
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.creation_validation
+ Snapshot:
+ type: aria.aws.interfaces.Snapshot
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.create_snapshot
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: string
+ default: {}
+ requirements:
+ - instance:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Instance
+ relationship: aria.aws.relationships.VolumeConnectedToInstance
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.KeyPair:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or if the resource should be created.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ If use_external_resource is false, this will be the keys name and ID in AWS.
+ If left blank, the plugin will set a name for you.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ private_key_path:
+ description: >
+ The path where the key should be saved on the machine. If this is a bootstrap
+ process, this refers to the local computer. If this will run on the manager,
+ this will be saved on the manager.
+ type: string
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ attributes:
+ aws_resource_id:
+ type: string
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.keypair.create
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.keypair.delete
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.keypair.creation_validation
+
+ aria.aws.nodes.ElasticLoadBalancer:
+ derived_from: tosca.nodes.LoadBalancer
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ elb_name:
+ description: >
+ The mnemonic name associated with the new load balancer
+ type: string
+ zones:
+ description: >
+ zones (List of strings) - The names of the availability zone(s) to add.
+ example: ['us-east-1b','us-east-1b']
+ type: string
+ security_groups:
+ description: >
+ security_groups (list of strings) - The security groups assigned to your LoadBalancer
+ within your VPC.
+ example: ['sg-123456','sg-7891011']
+ FYI: security groups only supported with vpc
+ type: list
+ entry_schema:
+ type: string
+ default: []
+ required: false
+ listeners:
+ description: >
+ listeners (List of tuples) - Each tuple contains three or four values, (LoadBalancerPortNumber,
+ InstancePortNumber, Protocol, [SSLCertificateId]) where LoadBalancerPortNumber and
+ InstancePortNumber are integer values between 1 and 65535, Protocol is a string containing
+ either 'TCP', 'SSL', 'HTTP', or 'HTTPS'; SSLCertificateID is the ARN of a AWS IAM certificate,
+ and must be specified when doing HTTPS.
+ example: [[80, 8080, 'http'], [443, 8443, 'tcp']]
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.LoadBalancerListener
+ health_checks:
+ description: >
+ list of healthchecks (dicts) to use as criteria for instance health
+ example: [{'target': 'HTTP:8080/health'}, {'target': 'HTTP:80/alive'}]
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.LoadBalancerHealthCheck
+ default: []
+ required: false
+ scheme:
+ description: >
+ The type of a LoadBalancer. By default, Elastic Load Balancing creates an internet-facing
+ LoadBalancer with a publicly resolvable DNS name, which resolves to public IP addresses.
+ Specify the value internal for this option to create an internal LoadBalancer with a DNS
+ name that resolves to private IP addresses.
+ This option is only available for LoadBalancers attached to an Amazon VPC.
+ type: string
+ default: ''
+ required: false
+ subnets:
+ description: >
+ list of strings - A list of subnet IDs in your VPC to attach to your LoadBalancer.
+ example:
+ type: list
+ entry_schema:
+ type: string
+ default: []
+ required: false
+ complex_listeners:
+ description: >
+ List of tuples - Each tuple contains four or five values, (LoadBalancerPortNumber,
+ InstancePortNumber, Protocol, InstanceProtocol, SSLCertificateId).
+ Where:
+ LoadBalancerPortNumber and InstancePortNumber are integer values between 1 and 65535
+ Protocol and InstanceProtocol is a string containing either 'TCP', 'SSL', 'HTTP', or 'HTTPS'
+ SSLCertificateId is the ARN of an SSL certificate loaded into AWS IAM
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.LoadBalancerComplexListener
+ default: []
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticloadbalancer.create
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticloadbalancer.start
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticloadbalancer.delete
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticloadbalancer.creation_validation
+
+ aria.aws.nodes.VPC:
+ derived_from: tosca.nodes.network.Network
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ cidr_block:
+ description: >
+ The CIDR Block that you will split this VPCs subnets across.
+ type: string
+ instance_tenancy:
+ description: >
+ Default or dedicated.
+ type: string
+ default: default
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.create_vpc
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.start
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.delete
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.RouteTableOfSourceVPCConnectedToTargetPeerVPC
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.Subnet:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ cidr_block:
+ description: >
+ The CIDR Block that instances will be on.
+ type: string
+ availability_zone:
+ description: >
+ The availability zone that you want your subnet in.
+ type: string
+ default: ''
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.subnet.create_subnet
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.subnet.start_subnet
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.subnet.delete_subnet
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.subnet.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.SubnetContainedInVPC
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.Gateway:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.GatewayConnectedToVPC
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.InternetGateway:
+ derived_from: aria.aws.nodes.Gateway
+ properties:
+ cidr_block:
+ description: >
+ The cidr_block that you want this internet gateway to service. Default is for all internet
+ traffic.
+ type: string
+ default: '0.0.0.0/0'
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.create_internet_gateway
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.start_internet_gateway
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.delete_internet_gateway
+
+ aria.aws.nodes.VPNGateway:
+ derived_from: aria.aws.nodes.Gateway
+ properties:
+ type:
+ description: >
+ Type of VPN Connection. Only valid value currently is ipsec.1
+ type: string
+ default: ipsec.1
+ availability_zone:
+ description: >
+ The Availability Zone where you want the VPN gateway.
+ type: string
+ default: ''
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.create_vpn_gateway
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.start_vpn_gateway
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.delete_vpn_gateway
+
+ aria.aws.nodes.CustomerGateway:
+ derived_from: aria.aws.nodes.Gateway
+ properties:
+ type:
+ description: >
+ Type of VPN Connection. Only valid value currently is ipsec.1
+ type: string
+ default: ipsec.1
+ ip_address:
+ description: >
+ Internet-routable IP address for customers gateway. Must be a static address
+ type: string
+ bgp_asn:
+ description: >
+ Customer gateways Border Gateway Protocol (BGP) Autonomous System Number (ASN)
+ type: integer
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.create_customer_gateway
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.start_customer_gateway
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.delete_customer_gateway
+ requirements:
+ - vpn_gateway:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPNGateway
+ relationship: aria.aws.relationships.CustomerGatewayConnectedToVPNGateway
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.ACL:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ acl_network_entries:
+ description: >
+ A list of rules of data type aria.datatypes.aws.NetworkAclEntry (see above).
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.NetworkAclEntry
+ default: []
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.networkacl.create_network_acl
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.networkacl.start_network_acl
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.networkacl.delete_network_acl
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.networkacl.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.NetworkACLContainedInVPC
+ occurrences: [ 0, UNBOUNDED ]
+ - subnet:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Subnet
+ relationship: aria.aws.relationships.NetworkACLAssociatedWithSubnet
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.DHCPOptions:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ domain_name:
+ description: >
+ A domain name.
+ type: string
+ required: false
+ domain_name_servers:
+ description: >
+ A list of up to four DNS servers.
+ type: list
+ entry_schema:
+ type: string
+ default: []
+ required: false
+ ntp_servers:
+ description: >
+ A list of up to four NTP servers.
+ type: list
+ entry_schema:
+ type: string
+ default: []
+ required: false
+ netbios_name_servers:
+ description: >
+ A list of up to four netbios servers.
+ type: list
+ entry_schema:
+ type: string
+ default: []
+ required: false
+ netbios_node_type:
+ description: >
+ netbios type. recommended two.
+ type: string
+ default: ''
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.dhcp.create_dhcp_options
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.dhcp.start_dhcp_options
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.dhcp.delete_dhcp_options
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.dhcp.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.DHCPOptionsAssociatedWithVPC
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.RouteTable:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ required: true
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify_aws.vpc.routetable.create_route_table
+ inputs:
+ routes:
+ description: >
+ A list of aria.aws.datatypes.Route.
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.Route
+ default: []
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.start_route_table
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.delete_route_table
+ Validation:
+ type: aria.aws.interfaces.Validation
+ creation:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.creation_validation
+ requirements:
+ - vpc:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.VPC
+ relationship: aria.aws.relationships.SubnetContainedInVPC
+ occurrences: [ 0, UNBOUNDED ]
+ - subnet:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Subnet
+ relationship: aria.aws.relationships.RoutetableAssociatedWithSubnet
+ occurrences: [ 0, UNBOUNDED ]
+ - gateway:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Gateway
+ relationship: aria.aws.relationships.RouteTableToGateway
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.Interface:
+ derived_from: tosca.nodes.network.Port
+ properties:
+ use_external_resource:
+ description: >
+ Indicate whether the resource exists or it should be created,
+ true if you are bringing an existing resource, false if you want to create it.
+ type: boolean
+ default: false
+ resource_id:
+ description: >
+ The AWS resource ID of the external resource, if use_external_resource is true.
+ Otherwise it is an empty string.
+ type: string
+ default: ''
+ tags:
+ description: >
+ A dictionary of key/value pairs of tags you want to add.
+ type: map
+ default: {}
+ entry_schema:
+ type: string # http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
+ parameters:
+ description: >
+ Any parameters accepted by the create_network_interface operation.
+ type: aria.aws.datatypes.NetworkInterfaceCreateParameters
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ required: false
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.eni.create
+ inputs:
+ args:
+ type: aria.aws.datatypes.NetworkInterfaceCreateParameters
+ default: {}
+ start:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.eni.start
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.eni.delete
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: string
+ default: {}
+ requirements:
+ - instance:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.Instance
+ relationship: aria.aws.relationships.ENIConnectedToInstance
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.SecurityGroupRule:
+ derived_from: tosca.nodes.Root
+ properties:
+ use_external_resource:
+ type: boolean
+ default: False
+ resource_id:
+ description: >
+ The resource ID.
+ type: string
+ default: ''
+ required: false
+ rule:
+ description: >
+ A list of rules of data type aria.aws.datatypes.SecurityGroupRule (see above).
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.SecurityGroupRule
+ default: []
+ required: false
+ aws_config:
+ description: >
+ A dictionary of values to pass to authenticate with the AWS API.
+ type: aria.aws.datatypes.Config
+ requirements:
+ - security_group_to_depend_on:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.SecurityGroup
+ relationship: aria.aws.relationships.RuleDependsOnSecurityGroup
+ occurrences: [ 0, UNBOUNDED ]
+ - security_group_to_be_contained_in:
+ capability: tosca.capabilities.Node
+ node: aria.aws.nodes.SecurityGroup
+ relationship: aria.aws.relationships.RuleContainedInSecurityGroup
+ occurrences: [ 0, UNBOUNDED ]
+
+ aria.aws.nodes.SecurityGroupRule.Multi:
+ derived_from: aria.aws.nodes.SecurityGroupRule
+ interfaces:
+ Standard:
+ create:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.securitygroup.create_rule
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: aria.aws.datatypes.SecurityGroupRule
+ default: {}
+ delete:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.securitygroup.delete_rule
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: aria.aws.datatypes.SecurityGroupRule
+ default: {}
+
+
+relationship_types:
+ aria.aws.relationships.ConnectedToElasticIP:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticip.associate
+ remove_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticip.disassociate
+
+ aria.aws.relationships.InstanceConnectedToElasticIP:
+ derived_from: aria.aws.relationships.ConnectedToElasticIP
+
+ aria.aws.relationships.InstanceConnectedToKeypair:
+ derived_from: tosca.relationships.ConnectsTo
+
+ aria.aws.relationships.ConnectedToSecurityGroup:
+ derived_from: tosca.relationships.ConnectsTo
+
+ # The name of this relationship is not in CamelCase since in order to attach security group to an
+ # instance using the Cloudify AWS plugin, the relationship between the instance and the security
+ # group must be include the string 'instance_connected_to_security_group' in its name.
+ aria.aws.relationships.instance_connected_to_security_group:
+ derived_from: aria.aws.relationships.ConnectedToSecurityGroup
+
+ aria.aws.relationships.InstanceConnectedToLoadBalancer:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticloadbalancer.associate
+ remove_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.elasticloadbalancer.disassociate
+
+ aria.aws.relationships.VolumeConnectedToInstance:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.associate
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: string
+ default: {}
+ force:
+ type: boolean
+ default: False
+ remove_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.ebs.disassociate
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: string
+ default: {}
+ force:
+ type: boolean
+ default: False
+
+ aria.aws.relationships.SubnetContainedInVPC:
+ derived_from: tosca.relationships.HostedOn
+
+ aria.aws.relationships.RoutetableContainedInVPC:
+ derived_from: tosca.relationships.HostedOn
+
+ aria.aws.relationships.RoutetableAssociatedWithSubnet:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.associate_route_table
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.disassociate_route_table
+
+ aria.aws.relationships.RouteTableToGateway:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.create_route_to_gateway
+ inputs:
+ destination_cidr_block:
+ description: >
+ Provide a specific value for the destination cidr block.
+ If the target is an internet gateway, then this is not necessary.
+ It will resolve to the cidr_block node property.
+ Otherwise, you need to provide this value.
+ type: string
+ default: ''
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.routetable.delete_route_from_gateway
+
+ aria.aws.relationships.GatewayConnectedToVPC:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.attach_gateway
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.detach_gateway
+
+ aria.aws.relationships.NetworkACLContainedInVPC:
+ derived_from: tosca.relationships.HostedOn
+
+ aria.aws.relationships.NetworkACLAssociatedWithSubnet:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.networkacl.associate_network_acl
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.networkacl.disassociate_network_acl
+
+ aria.aws.relationships.RouteTableOfSourceVPCConnectedToTargetPeerVPC:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ pre_configure_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.create_vpc_peering_connection
+ inputs:
+ target_account_id:
+ description: >
+ The 12 digit account ID that the target VPC belongs to.
+ type: string
+ default: ''
+ routes:
+ description: >
+ A list of aria.aws.datatypes.Route for assignment to the source Route Table.
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.Route
+ default: []
+ post_configure_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.accept_vpc_peering_connection
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.vpc.delete_vpc_peering_connection
+
+ aria.aws.relationships.DHCPOptionsAssociatedWithVPC:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.dhcp.associate_dhcp_options
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.dhcp.restore_dhcp_options
+
+ aria.aws.relationships.CustomerGatewayConnectedToVPNGateway:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.create_vpn_connection
+ inputs:
+ routes:
+ description: >
+ A list of static routes to add to this vpn_connection.
+ The routes will be of type aria.aws.datatypes.Route.
+ However, you can only provide the destination_cidr_block and a vpn_connection_id.
+ type: list
+ entry_schema:
+ type: aria.aws.datatypes.Route
+ default: []
+ remove_target:
+ implementation: cloudify-aws-plugin > cloudify_aws.vpc.gateway.delete_vpn_connection
+
+ aria.aws.relationships.InstanceContainedInSubnet:
+ derived_from: tosca.relationships.HostedOn
+
+ aria.aws.relationships.InstanceConnectedToSubnet:
+ derived_from: tosca.relationships.ConnectsTo
+
+ aria.aws.relationships.SecurityGroupContainedInVPC:
+ derived_from: tosca.relationships.HostedOn
+
+ aria.aws.relationships.ConnectedToSubnet: # ARIA NOTE: I don't see a use for this relationship
+ derived_from: tosca.relationships.ConnectsTo
+
+ aria.aws.relationships.ENIConnectedToInstance:
+ derived_from: tosca.relationships.ConnectsTo
+ interfaces:
+ Configure:
+ add_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.eni.associate
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: string
+ default: {}
+ remove_source:
+ implementation: cloudify-aws-plugin > cloudify_aws.ec2.eni.disassociate
+ inputs:
+ args:
+ type: map
+ entry_schema:
+ type: string
+ default: {}
+
+ aria.aws.relationships.InstanceConnectedToENI:
+ derived_from: tosca.relationships.ConnectsTo
+
+ aria.aws.relationships.SecurityGroupUsesRule:
+ derived_from: tosca.relationships.DependsOn
+
+ aria.aws.relationships.RuleDependsOnSecurityGroup:
+ derived_from: tosca.relationships.DependsOn
+
+ aria.aws.relationships.RuleContainedInSecurityGroup:
+ derived_from: tosca.relationships.HostedOn
Code Review / multicloud / azure.git / blobdiff