+++ /dev/null
-###
-# ============LICENSE_START=======================================================
-# ONAP : APPC
-# ================================================================================
-# Copyright (C) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Copyright (C) 2017 Amdocs
-# =============================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# ============LICENSE_END=========================================================
-###
-
-# This property file contains all message definitions used by APPC
-#
-# Message resources are identified by a key, which is defined in the Msg enumeration. This key is
-# assigned a value which consists of 4 parts separated by a pipe (|) symbol. These parts are:
-#
-# 1. The message identifier
-# 2. The Message text to be formatted and issued to the user
-# 3. The suggested resolution text, how to fix the problem.
-# 4. The description text, what is the problem so the user can understand
-#
-CONFIGURATION_STARTED=APPC0001I|\
- ECOMP Application Controller (APP-C) initialization started at {0}|\
- No resolution is required, this is an informational message|\
- The APP-C component configuration has been started because the component is being \
- initialized or loaded for the first time, or a new instance of the component is \
- being created. This message indicates that the component is starting.
-
-CONFIGURATION_CLEARED=APPC0002I|\
- All prior configuration has been cleared|\
- No resolution is required, this is an informational message|\
- The APP-C component is being started or restarted and any prior configuration \
- (if present), is cleared. This is normal.
-
-LOADING_CONFIGURATION_OVERRIDES=APPC0003I|\
- Loading configuration properties from file "{0}"|\
- No resolution is required, this is an informational message|\
- This message indicates that the configuration of the APP-C component was located \
- and is being loaded from the specified file.
-
-LOADING_DEFAULTS=APPC0004I|\
- Configuration defaults loaded from resource file "{0}"|\
- No resolution is required, this is an informational message|\
- This is a normal indication that the default configuration settings were loaded \
- from the resource file. The APP-C components load a default configuration first \
- so that all configuration values have valid default settings. Any user configuation \
- that may be specified then overrides these defaults.
-
-NO_DEFAULTS_FOUND=APPC0005E|\
- No default property resource "{0}" was found!|\
- This is an internal error. Contact support.|\
- This is an internal error that indicates that the default resource property file \
- could not be located. This is likely a packaging error and is indicative of \
- a construction problem. Refer this to development or level 3 support for assistance.
-
-PROPERTY_VALUE=APPC0006I|\
- Property "{0}" ="{1}"|\
- No resolution is required, this is an informational message|\
- This message is issued to show the value of configuration properties and is used to \
- debug start up of the component.
-
-NO_OVERRIDE_PROPERTY_FILE_LOADED=APPC0007E|\
- No configuration file named [{0}] was found on the configuration search path [{1}]. \
- If a configuration file should have been loaded, check the file name and search \
- path specified. APPC will proceed using the default values and command-line \
- overrides (if any).|\
- If a configuration file was expected, verify the file name and that it exists on \
- the search path for the configuration properties. The search path defaults to \
- <em>${user.home},/opt/app/appc/etc,etc,../etc,/etc,.</em> and can be overridden \
- by specification of the property <em>org.onap.appc.bootstrap.path</em>. The \
- property file name defaults to <em>appc.properties</em> and can also be \
- overridden by the <em>org.onap.appc.bootstrap.file</em> property.|\
- This message indicates that the bootstrap path was searched for the bootstrap \
- property file (a file that can be supplied to configure APPC) and that no file \
- with the specified name was found on any of the path elements of the path.
-
-SEARCHING_CONFIGURATION_OVERRIDES=APPC0008I|\
- Searching path "{0}" for configuration settings "{1}"|\
- No resolution is required|\
- This message indicates that the specified path is being examined for a configuration \
- file of the indicated name. The configuration file defaults to <em>appc.properties</em> \
- but can be overridden by specification of the <em>org.onap.appc.bootstrap.file</em> \
- property (using a command-line override, for example). This message is intended to \
- assist in the debugging and analysis of configuration issues where the indicated \
- file may not be processed or found. The path that is searched is a comma-delimited \
- list of directories and defaults to <em>${user.home},/opt/app/appc/etc,etc,../etc,/etc,.</em> \
- but can also be overridden by specification of the <em>org.onap.appc.bootstrap.path</em> \
- property.
-
-LOADING_APPLICATION_OVERRIDES=APPC0009I|\
- Loading application-specific override properties|\
- No resolution required|\
- This message indicates that the APPC component was invoked as an embedded component \
- and that the caller has supplied an override property object.
-
-NO_APPLICATION_OVERRIDES=APPC0010I|\
- No application-specific override properties were provided!|\
- No resolution required|\
- This message indicates that the APPC component was invoked as an embedded component \
- and that the caller has supplied an override property object, but that object was \
- empty.
-
-MERGING_SYSTEM_PROPERTIES=APPC0011I|\
- Merging system properties into configuration|\
- No resolution is required|\
- This message indicates that the java virtual machine system properties are being \
- examined and merged into the APP-C component configuration. This allows for command \
- line specification of any APP-C configuration property as a standard java define \
- JVM option (ex: -Dproperty=value).
-
-SETTING_SPECIAL_PROPERTY=APPC0012I|\
- Setting property "{0}={1}" in system properties|\
- No resolution required.|\
- This message indicates that the specified property loaded from defaults, property \
- file overrides, application overrides, or command-line overrides is being placed \
- in the system (java virtual machine) properties object. Some libraries that may \
- be integrated with APP-C (for example, DME2 or AFT libraries) may only look for \
- their properties in the system properties object. This allows those components \
- to be configured from the APP-C configuration.
-
-LOADING_RESOURCE_BUNDLE=APPC0013I|\
- Loading resource bundle "{0}"|\
- No resolution required|\
- This message indicates that the specified resource bundle is being loaded.
-
-LOGGING_ALREADY_INITIALIZED=APPC0014W|\
- Logging has already been initialized, check the container logging definitions to ensure \
- they represent your desired logging configuration.|\
- If logging is configured incorrectly, move the definitions to the container or component \
- that first initialized logging. If they are ok, no resolution is required.|\
- This message indicates that the logging environment already exists and has been configured.
-
-SEARCHING_LOG_CONFIGURATION=APPC0015I|\
- Searching path "{0}" for log configuration file "{1}"|\
- No resolution is required|\
- This message indicates that the APP-C component configuration file specified a logging \
- configuration file and/or search path and the path is being searched. This is used to \
- assist in debugging the configuration process.
-
-LOADING_DEFAULT_LOG_CONFIGURATION=APPC0016I|\
- Loading default logging configuration from system resource file "{0}"|\
- No resolution is required|\
- A default logging configuration for the component is loaded from system resources to \
- ensure that a valid logging environment exists. This is a normal message, and will \
- be followed by APPC0019I if a user-specified logging configuration overrides the \
- defaults.
-
-NO_LOG_CONFIGURATION=APPC0017E|\
- No log configuration could be found or defaulted!|\
- A valid logging configuration cannot be found, and no default configuration resource \
- was loaded. This is likely a packaging issue and should be referred to development \
- or level 3 support for assistance.|\
- This is an internal error.
-
-UNSUPPORTED_LOGGING_FRAMEWORK=APPC0018E|\
- An unsupported logging framework is bound to SLF4J. Only Logback or Log4J are supported.|\
- This is a compatibility error with logging frameworks used in the application environment \
- and should be referred to development or level 3 support for assistance.|\
- This is an internal error.
-
-LOADING_LOG_CONFIGURATION=APPC0019I|\
- Loading logging configuration from file "{0}"|\
- No resolution is required|\
- The specified logging configuration is being loaded.
-
-UNKNOWN_PROVIDER=APPC0020E|\
- Provider {0} cannot be found or cannot be resolved to one of the known providers, [{1}].|\
- Specify the name of a valid provider. The IAAS adapter contains a set of providers \
- that are defined. Each of these providers is assigned a logical name. The call \
- to the IAAS adapter must specify the name of the provider that is desired. This \
- could be the result of an incorrect call, or the IAAS adapter configuration is \
- wrong.|\
- The APP-C IAAS adapter is being called to request a service on a specific provider, but \
- the name of the provider cannot be found in the list of defined providers. This may \
- be an error in the directed graph that contains the call to the IAAS adapter, or it \
- may be an error in the request, or the configuration of the IAAS adapter may need \
- to be updated.
-
-SERVER_STATE_CHANGE_TIMEOUT=APPC0021E|\
- Server name "{0}" with id "{1}" in tenant "{2}" and region "{3}" did not change state \
- within the alloted time. Current state is "{4}" and the desired state(s) are "{5}"|\
- This is likely a provider issue. If the provider is OpenStack, check the virtual \
- machine on the horizon dashboard. If the machine is in an invalid state, you may \
- need to contact Openstack support. The exact mechanisms for recovery of a machine \
- in an invalid state are varied and will be different from provider to provider.|\
- This message indicates that the IAAS adapter has performed some requested action \
- on the specified server (virtual machine) but the server did not enter a valid \
- state (running, stopped, etc) within the timeout period. The last state (current state) \
- is shown, as well as the state that was expected. The servers name, UUID, containing \
- tenant, and region are shown so that the correct provider can be examined.
-
-SERVER_DELETED=APPC0022E|\
- Server name "{0}" with id "{1}" in tenant "{2}" has a state of deleted and cannot be {3}.|\
- The specified server has been deleted on the provider. This is likely an incorrect \
- request. Make sure that you are specifying the correct server ID/name, provider, \
- and region. If the self-link URL is used, make sure that the correct server resource \
- is specified. If the machine was correct, recreate or rebuild the machine to make \
- it usable. Correct the request.|\
- This message indicates that the server specified was found to have been deleted in the \
- target provider and that the requested action cannot be performed. This may be caused \
- by several things:\
- <ol>\
- <li>The UUID of the server is wrong and specifies a machine that no longer exists</li>\
- <li>The machine was deleted by a different process or request</li>\
- <li>The wrong provider was requested</li>\
- <li>The request was out-of-order</li>\
- </ol>
-
-UNKNOWN_SERVER_STATE=APPC0023E|\
- Server name "{0}" with id "{1}" in tenant "{2}" has an unknown state of "{3}".|\
- Check the machine to determine the state of the machine. Correct that state to a valid \
- state if possible. This may also be caused by an internal error in the PAL (Provider \
- Abstraction Layer) used by the IAAS if a new state definition has been added to the \
- provider (such as a new version or the installation of an unknown or unsupported \
- extension). If the machine's state is valid, refer this error to development or \
- level 3 support for assistance.|\
- This message indicates that a request was made to the IAAS adapter to take some action \
- on the specified virtual machine, but the machine was found to be in a state that \
- prevents that action from being performed.
-
-COMPONENT_INITIALIZING=APPC0024I|\
- {0} component {1} is being initialized...|\
- No resolution needed|\
- The IAAS adapter is being initialized
-
-COMPONENT_INITIALIZED=APPC0025I|\
- {0} component {1} has completed initialization|\
- No resolution needed|\
- The IAAS adapter has been initialized
-
-COMPONENT_TERMINATING=APPC0026I|\
- {0} component {1} is terminating...|\
- No resolution needed|\
- The IAAS adapter is being terminated
-
-COMPONENT_TERMINATED=APPC0027I|\
- {0} component {1} has terminated|\
- No resolution needed|\
- The IAAS adapter has been terminated
-
-IAAS_ADAPTER_UNSUPPORTED_OPERATION=APPC0028E|\
- Operation {0} is not supported or implemented at this time.|\
- Change the request to a supported operation|\
- The IAAS adapter has been requested to perform some operation that it cannot \
- perform at this time.
-
-IAAS_ADAPTER_RPC_CALLED=APPC0029I|\
- Operation [{0}] called. Input document:\n{1}|\
- No resolution required|\
- The IAAS adapter operation indicated was called with the requested input \
- parameters.
-
-NO_SERVICE_FOUND=APPC0030E|\
- Unable to locate the [{0}] service in the OSGi container|\
- Ensure that the feature containing that service is installed and running|\
- This indicates that the required feature could not be located
-
-CONTEXT_PARAMETERS_DISPLAY=APPC0031I|\
- Dump of context parameters for module [{0}], RPC [{1}], and version [{2}]|\
- No resolution required|\
- The specified RPC is being called and the context properties are being \
- displayed. This is a debugging message and preceeds the display of \
- each context property.
-
-RESPONSE_PARAMETERS_DISPLAY=APPC0032I|\
- Response properties from execution of module [{0}], RPC [{1}], and version [{2}] are:|\
- No resolution required|\
- The service logic directed graph has been executed and returned the response properties. \
- This message preceeds the dump of the response properties. It is used for debugging \
- of service logic and execution problems.
-
-NULL_OR_INVALID_ARGUMENT=APPC0033E|\
- Service {0}:{1} was provided a null (empty) or invalid argument, [{2}] = [{3}]|\
- This is likely an internal error, refer to support for assistance|\
- The indicated service was called, but the specified parameter or argument was either \
- null or empty, or it was invalid. If it has a value, the value is shown. If the \
- value is null, the value is shown as 'null'.
-
-PROCESSING_REQUEST=APPC0034I|\
- Service {0}:{1} is processing service [{2}] with request id [{3}]|\
- No resolution required|\
- The indicated application and RPC is processing the specified service request.
-
-INVALID_SERVICE_REQUEST=APPC0035E|\
- Service {0}:{1} received request for service [{2}] but that service is invalid or unknown.|\
- Correct the service request, likely a directed graph issue|\
- The RPC was invoked to process a service request, but the service is not valid.
-
-REGISTERING_SERVICE=APPC0036I|\
- {0} registering service {1} using class {2}|\
- No resolution required|\
- The indicated application service is registering itself with the OSGi container using the \
- indicated java class name.
-
-UNREGISTERING_SERVICE=APPC0037I|\
- {0} unregistering service {1}|\
- No resolution required|\
- The application service is being unregistered from the OSGi container services list.
-
-LOADING_PROVIDER_DEFINITIONS=APPC0038I|\
- {0} IAAS Adapter initializing provider {1} as {2}|\
- No resolution is required|\
- The IAAS adapter is loading the definition of the specified provider from its \
- configuration file.
-
-RESTARTING_SERVER=APPC0039I|\
- {0} IAAS Adapter restart of server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the restart of a server. The \
- properties that govern the request are echoed immediately following this message.
-
-REBUILDING_SERVER=APPC0040I|\
- {0} IAAS Adapter rebuild of server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the rebuilding of a server. The \
- properties that govern the request are echoed immediately following this message.
-
-INVALID_SELF_LINK_URL=APPC0041E|\
- {0} IAAS Adapter cannot perform requested service, VM url [{1}] is invalid|\
- Correct the call to the adapter with a valid self-link URL|\
- The IAAS adapter has been called to perform some operation on a virtual machine \
- but the vm_id of the virtual machine is not valid.
-
-SERVER_FOUND=APPC0042I|\
- Located server {0} on tenant [{1}] and in state [{2}]|\
- No resolution required|\
- This message indicates that a service request was made to perform some action on the server \
- and the indicated server was located on the specified tenant.\
-
-
-STACK_FOUND=APPC0042I|\
- Located stack {0} on tenant [{1}] and in state [{2}]|\
- No resolution required|\
- This message indicates that a service request was made to perform some action on the server \
- and the indicated server was located on the specified tenant.
-
-
-
-SERVER_NOT_FOUND=APPC0043E|\
- No server found in provider with self-link URL [{0}]|\
- Correct the server URL|\
- The requested server, identified by its self link URL, could not be found in the provider
-
-SERVER_OPERATION_EXCEPTION=APPC0044E|\
- Exception {0} was caught attempting {1} of server [{2}] on tenant [{3}]|\
- Contact support for assistance|\
- An exception was caught while trying to perform the indicated operation on the server. The \
- exception may yield more information about the cause of the error. This may be because \
- of access security, or the server is in an invalid state, or any number of reasons. This \
- message should be referred to support for assistance.
-
-
-STACK_NOT_FOUND=APPC0043E|\
- No stack found in provider with self-link URL [{0}]|\
- Correct the server URL|\
- The requested stack, identified by its self link URL, could not be found in the provider
-
-STACK_OPERATION_EXCEPTION=APPC0044E|\
- Exception {0} was caught attempting {1} of server [{2}] on tenant [{3}]|\
- Contact support for assistance|\
- An exception was caught while trying to perform the indicated operation on the stack. The \
- exception may yield more information about the cause of the error. This may be because \
- of access security, or the stack is in an invalid state, or any number of reasons. This \
- message should be referred to support for assistance.
-
-MISSING_REQUIRED_PROPERTIES=APPC0045E|\
- One or more properties for [{0}] are missing, null, or empty. They are:|\
- A request to execute the adapter indicated was made from a directed graph, but the properties \
- of the request that are required by the adapter are missing or do not have a value. Correct \
- the directed graph to supply the missing properties.|\
- The specified properties for the indicated adapter operation are invalid or missing.
-
-SERVER_ERROR_STATE=APPC0046E|\
- The server [{0}] (id={1}) in tenant {2} is in error state, {3} is not allowed|\
- Destroy and recreate the instance|\
- A request to restart or rebuild a server in an error state was received, but those operations \
- are not allowed on a server in this state. OpenStack only allows a deletion of a server \
- that is in the error state.
-
-IMAGE_NOT_FOUND=APPC0047E|\
- The image {0} could not be located for {1}.|\
- The image indicated could not be found. If the operation being requested is a rebuild of \
- a server, then there is no action that can be taken other than to destroy the server and \
- rebuild it using an image that exists.|\
- This is likely caused by an image being deleted after it was used to build a server. If the \
- request is for a server rebuild, then the image used to create the server was later deleted \
- and no longer exists. The server cannot be rebuilt, because the image doesnt exist. \
- The server must be deleted and reconstructed using a valid, existing image.
-
-STATE_CHANGE_TIMEOUT=APPC0048E|\
- Time out waiting for {0} with name {1} (and id {2}) to reach one of {3} states, current state is {4}|\
- Recover the resource in whatever means is appropriate|\
- The resource indicated (by name and id) was expected to change it's state (status) to one of the \
- indicated expected states within a specified timeout but the resource did not complete the \
- state change. It's current state is also shown. This can be caused by any number of factors \
- but is normally a problem or conflict within the IaaS provider (OpenStack).
-
-STATE_CHANGE_EXCEPTION=APPC0049E|\
- Exception {0} waiting for {1} with name {2} (and id {3}) to reach one of {4} states, current state is {5}\n\
- cause={6}|\
- Recover the resource in whatever means is appropriate|\
- The resource indicated (by name and id) was expected to change it's state (status) to one of the \
- indicated expected states within a specified timeout but the resource did not complete the \
- state change. It's current state is also shown. This can be caused by any number of factors \
- but is normally a problem or conflict within the IaaS provider (OpenStack).
-
-STOP_SERVER=APPC0050I|\
- Server {0} is being stopped...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be stopped.
-
-START_SERVER=APPC0051I|\
- Server {0} is being started...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be started.
-
-RESUME_SERVER=APPC0052I|\
- Server {0} is being resumed...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be resumed from a suspended state.
-
-UNPAUSE_SERVER=APPC0053I|\
- Server {0} is being unpaused...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be unpaused from a paused state.
-
-CONNECTION_FAILED_RETRY=APPC0054E|\
- Connection to provider {0} at identity {1} using tenant name {2} (id {3}) failed, reason={4}, \
- retrying in {5} seconds, attempt {6} of {7}.|\
- The connection to the provider could not be obtained for the indicated reason. The application \
- controller will retry the attempt to connect to the provider a maximum number of times. The \
- message contains the amount of time the system will wait to retry the connection, and the \
- current attempt and the maximum number of attempts.|\
- Correct the cause of the connection failure as indicated by the reason.
-
-CONNECTION_FAILED=APPC0055E|\
- Connection to provider {0} at service {1} failed after all retry attempts.|\
- The connection to the named provider at the indicated service URL cannot be opened. All \
- retries have been exhausted. The application controller is giving up on the connection and will \
- fail the request.|\
- Correct the cause of the connection failure as indicated by the reason(s) in previous APPC0054E \
- messages.
-
-STOPPING_SERVER=APPC0056I|\
- {0} IAAS Adapter stop server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the server to be stopped. The \
- properties that govern the request are echoed immediately following this message.
-
-STARTING_SERVER=APPC0057I|\
- {0} IAAS Adapter start server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the server to be start. The \
- properties that govern the request are echoed immediately following this message.
-
-REBUILD_SERVER_FAILED=APPC0057E|\
- Server {0} (id {1}) failed to rebuild, reason {2}|\
- The server rebuild failed for the indicated reason. Correct the cause of the failure and \
- rerun, if applicable.|\
- The adapter has attempted to rebuild the indicated server but the rebuild request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-PARAMETER_IS_MISSING=APPC0058E|\
- Application {0} graph {1} response did not set the {2} parameter. This parameter is \
- required for synchronization with the controller. Absence of this parameter is assumed \
- to be a failure. Please correct the DG.|\
- The indicated directed graph was called from the application controller but when the \
- graph returned the indicated property was not defined in the return parameters. The \
- controller requires that property to be defined and set to a value that is used to \
- inform the controller of the outcome of operations in the graph. Failure to set \
- the required parameter is assumed to be a failure regardless if the graph actually \
- succeeded or not.|\
- Correct the DG to set the specified parameter to a value that is expected and understood \
- by the controller.
-
-PARAMETER_NOT_NUMERIC=APPC0059E|\
- Application {0} graph {1} did not set parameter {2} to a valid numeric value ({3}). \
- Please correct the DG.|\
- The indicated directed graph was called by the application controller and the graph \
- did set the specified property, however the property is not a valid numeric \
- value. The parameter is used to convey a numeric quantity and the controller \
- cannot convert the value specified to a number. |\
- Correct the DG.
-
-DG_FAILED_RESPONSE=APPC0060E|\
- Application {0} graph {1} completed with failure: error code = {2}, message = {3}|\
- The directed graph indicated was called by the application controller and when \
- the graph returned, an error code was set indicating that the graph failed. This \
- is a message that echoes the results of the graph, and shows the returned error \
- code and message.|\
- Correct the cause of the error.
-
-EXCEPTION_CALLING_DG=APPC0061E|\
- Application {0} received exception {1} attempting to call graph {2}, exception \
- message = {3}|\
- The application controller attempted to call the service logic interpreter (SLI) \
- to execute the indicated graph, but an exception was caught. The class of the \
- exception is shown, as is the message associated with the exception. An \
- abbreviated stack trace is also displayed to provide information as to the \
- state of the thread at the time of the exception.|\
- Correct the cause of the exception and rerun.
-
-GRAPH_NOT_FOUND=APPC0062E|\
- Application {0} was unable to locate graph {1}|\
- The application controller attempted to call the service logic interpreter (SLI) \
- to execute the specified graph but the graph does not exist in the SLI database.|\
- Correct the database and install the correct graph.
-
-DEBUG_GRAPH_RESPONSE_HEADER=APPC0063D|\
- Application {0} graph {1} responded with {2} properties|\
- This is a debugging message that is output immediately after the call to the \
- directed graph and before any processing is performed to determine the success \
- or failure of that call. The heading is output prior to dumping all the parameters \
- that were returned by the graph.|\
- No recovery action is required.
-
-DEBUG_GRAPH_RESPONSE_DETAIL=APPC0064D|\
- {0}:{1} - {2} = {3}|\
- This is a debugging message that is output immediately after the call to the \
- directed graph and before any processing is performed to determine the success \
- or failure of that call. This message is repeated for each parameter that \
- exists in the return context from the graph.|\
- No recovery action is required.
-
-INVALID_REQUIRED_PROPERTY=APPC0065E|\
- Application {0} request "{1}" was supplied a property "{2}" with the value "{3}" \
- that does not meet the required form(s):|\
- This message indicates that the specified requested operation was passed the \
- specific property named and the property value did not meet the expected \
- format requirements. For example, if the property is expected to be a \
- numeric quantity and it contains alphabetic characters, or if it is expected \
- to be a URL and it is not valid. The message also contains a list of one \
- or more regular expressions that were used to validate the input, and which \
- supply the syntax required for the property.|\
- Correct the property and retry.
-
-ATTACHINGVOLUME_SERVER=APPC0068I|\
- {0} IAAS Adapter attaching of volume to server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the attaching of volume to server. The \
- properties that govern the request are echoed immediately following this message.
-
-DETTACHINGVOLUME_SERVER=APPC0069I|\
- {0} IAAS Adapter detaching of volume from server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the detaching of volume from server. The \
- properties that govern the request are echoed immediately following this message.
-
-MIGRATING_SERVER=APPC066I|\
- {0} IAAS Adapter migrate of server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the migration of a server. The \
- properties that govern the request are echoed immediately following this message.
-
-EVACUATING_SERVER=APPC0067I|\
- {0} IAAS Adapter evacuate of server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the evacuation of a server. The \
- properties that govern the request are echoed immediately following this message.
-
-MIGRATE_SERVER_FAILED=APPC0068E|\
- Server {0} (id {1}) failed to migrate during {2} phase, reason {3}|\
- The server migration failed for the indicated reason. Correct the cause of the failure and \
- rerun, if applicable.|\
- The adapter has attempted to migrate the indicated server but the migration request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-EVACUATE_SERVER_FAILED=APPC0069E|\
- Server {0} (id {1}) failed to evacuate, reason {2}|\
- The server evacuation failed for the indicated reason. Correct the cause of the failure and \
- rerun, if applicable.|\
- The adapter has attempted to evacuate the indicated server but the evacuation request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-APPC_TOO_BUSY=APPC0080E|\
- APP-C instance is too busy|\
- The APP-C instance handles too many requests and cannot accept new ones as its internal \
- execution queue is full. The problem can appear when the APP-C instance gets more requests \
- than it can handle simultaneously.|\
- Check the server KPIs for possible performance issues (e.g. insufficient memory, \
- high network latency, slow responsiveness of southbound systems and so on) which can affect \
- the system throughput.
-
-VF_SERVER_BUSY=APPC0081E|\
- Concurrent access to server "{0}"|\
- APP-C currently executes a command on the specified server and cannot accept yet another request \
- for the same one.|\
- Try to resubmit the request at later time.
-
-VF_ILLEGAL_COMMAND=APPC0082E|\
- Server "{0}" does not support command "{1}" in the current state "{2}"|\
- APP-C cannot perform the requested command on the server in the current state as no state transition \
- is defined for that.|\
- Contact support for assistance.
-
-VF_UNDEFINED_STATE=APPC0083E|\
- Server "{0}" cannot handle command "{1}" because of its doubtful state|\
- The resource has undefined working state as result of abnormal termination of a previous command.|\
- Recover the resource in whatever means is appropriate.
-
-APPC_NO_RESOURCE_FOUND=APPC0084E|\
- No resource found with ID "{0}" in A&AI system.|\
- APP-C is unable to resolve the VF details given the instance ID.|\
- Check whether the resource has been deleted (terminated) before.
-
-APPC_EXPIRED_REQUEST=APPC0085E|\
- The request "{0}" for server "{1}" has exceeded its TTL limit of "{2}" seconds|\
- The received expired event won't be handled by APP-C instance. Normally the problem might be \
- related to asynchronous requests arriving to APP-C instance via DMaaP channel.|\
- Try to submit a new request if still relevant.
-
-APPC_WORKFLOW_NOT_FOUND=APPC0086E|\
- Workflow for vnfType = "{0}" and command = "{1}" not found.|\
- Unable to retrive Workflow related to mention VNF type and command.|\
- Check provided VNF and Command details are correct.
-
-APPC_INVALID_INPUT=APPC0087E|\
- Null vnfId and command provided|\
- Request contains Null vnfId and command|\
- Provided non-null VNF and Command details.
-
-APPC_AUDIT_MSG=APPC0090A|\
- Operation "{0}" for VNF type "{1}" from Source "{2}" with RequestID "{3}" \
- was started at "{4}" and ended at "{5}" with status code "{6}"|\
- Audit detailed msg|\
- Audit detailed msg.
-
-AAI_CONNECTION_FAILED=APPC0106E|\
- APP-C is unable to communicate with A&AI|\
- Connection to A&AI at service {0} failed after all retry attempts.|\
- The connection to the A&AI at the indicated service URL cannot be opened. \
- All retries have been exhausted. APP-C is giving up on the connection and will \
- reject the operation request.|\
- .
-
-AAI_UPDATE_FAILED=APPC0107E|\
- APP-C is unable to update COMPONENT_ID {0} to {1} for reason {2}|\
- The update at the end of the operation wasn't performed as a result of \
- A&AI communication failure or its internal error.|\
- .
-
-AAI_GET_DATA_FAILED=APPC0108E|\
- APP-C is unable to retrieve VF/VFC {0} data for Transaction ID {1} as a \
- result of A&AI communication failure or its internal error.|\
- Operation request will be rejected by APP-C|\
- .
-
-AAI_CONNECTION_FAILED_RETRY=APPC0105W|\
- A&AI at identity {0} using VNF_ID {1} failed, reason={2}, retrying in {3} seconds, attempt {4} of {5}.|\
- The connection to the A&AI could not be obtained for the indicated reason. APP-C will retry to connect \
- to the A&AI. The message contains the retry delay, the current attempt and the maximum number of attempts.|\
- Correct the cause of the connection failure as indicated by the reason.
-
-AAI_DELETE_FAILED=APPC0114E|\
- APP-C is unable to delete COMPONENT_ID {0} for reason {1}|\
- The deletion at the end of the operation wasn't performed as a result of \
- A&AI communication failure or its internal error.|\
- .
-
-AAI_QUERY_FAILED=APPC0115E|\
- Error Querying AAI with vnfID = {0}|\
- Querying AAI for the given vnf id returns failure to APPC|\
- .
-
-VNF_CONFIGURED=APPC0118I|\
- VNF {0} is configured|\
- No resolution is required, this is an informational message|\
- The VNF configuration has been completed.
-
-VNF_CONFIGURATION_STARTED=APPC0116I|\
- VNF {0} is being configured|\
- No resolution is required, this is an informational message|\
- The VNF configuration has been started
-
-VNF_CONFIGURATION_FAILED=APPC0119E|\
- VNF {0} configuration failed for reason {1}|\
- The configuration operation wasn't performed as a result of VNF communication failure or its internal error.|\
- .
-
-VNF_TEST_STARTED=APPC0120I|\
- VNF {0} is being tested|\
- No resolution is required, this is an informational message|\
- The VNF test has been started
-
-VNF_TESTED=APPC0121I|\
- VNF {0} was tested|\
- No resolution is required, this is an informational message|\
- The VNF test has been completed
-
-VNF_TEST_FAILED=APPC0122E|\
- VNF {0} test failed for reason {1}|\
- The test operation wasn't performed as a result of VNF communication failure or its internal error.|\
- .
-
-VNF_NOT_FOUND=APPC0123E|\
- VNF not found with vnf_id {0}|\
- The VNF wasn't found for the given vnf-id.|\
- .
-
-VNF_HEALTHCECK_FAILED=APPC0124E|\
- VNF {0} Healthcheck operation failed, reason {1}|\
- The health check operation wasn't performed as a result of VNF communication failure or its internal error.|\
- .
-
-VM_HEALTHCECK_FAILED=APPC0125E|\
- VM {0} Healthcheck operation failed, reason {1}|\
- The health check operation wasn't performed as a result of VNF communication failure or its internal error.|\
- .
-
-STOP_SERVER_FAILED=APPC0112E|\
- Server {0} (id {1}) failed to stop during {2} phase, reason {3}|\
- The server stop failed for the indicated reason. Correct the cause of the failure and \
- rerun, if applicable.|\
- The adapter has attempted to stop the indicated server but the stop request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-TERMINATE_SERVER_FAILED=APPC0113E|\
- Server {0} (id {1}) failed to terminate during {2} phase, reason {3}|\
- The server termination failed for the indicated reason. Correct the cause of the failure and \
- rerun, if applicable.|\
- The adapter has attempted to terminate the indicated server but the migration request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-TERMINATE_STACK_FAILED=APPC0113E|\
- Server {0} (id {1}) failed to terminate during {2} phase, reason {3}|\
- The server termination failed for the indicated reason. Correct the cause of the failure and \
- rerun, if applicable.|\
- The adapter has attempted to terminate the indicated server but the migration request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-TERMINATING_SERVER=APPC0114I|\
- {0} IAAS Adapter terminate server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the server to be terminated. The \
- properties that govern the request are echoed immediately following this message.
-
-
-TERMINATING_STACK=APPC0115I|\
- {0} IAAS Adapter terminate stack requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the server to be terminated. The \
- properties that govern the request are echoed immediately following this message.
-
-TERMINATE_SERVER=APPC0116I|\
- Server {0} is being terminated...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be terminated.
-
-TERMINATE_STACK=APPC0117I|\
- Stack {0} is being terminated...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be terminated.
-
-MIGRATE_COMPLETE=APPC0118I|\
- Migrate {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\
- No resolution is required, this is an informational message|\
- APP-C Migrate Operation has completed.
-
-RESTART_COMPLETE=APPC0119I|\
- Restart {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\
- No resolution is required, this is an informational message|\
- APP-C Restart Operation has completed.
-
-REBUILD_COMPLETE=APPC0120I|\
- Rebuild {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\
- No resolution is required, this is an informational message|\
- APP-C Rebuild Operation has completed.
-
-CLOSE_CONTEXT_FAILED=APPC0121E|\
- Exception {0} was caught attempting to close provider context for {1}.|\
- Contact support for assistance|\
- An exception was caught while trying to close the provider context. The \
- exception may yield more information about the cause of the error. This may be because \
- of access security, or the server is in an invalid state, or any number of reasons. This \
- message should be referred to support for assistance.
-
-SNAPSHOTING_STACK=APPC0122I|\
- Stack {0} is being snapshoted...|\
- No resolution is required|\
- Stack snapshot.
-
-STACK_SNAPSHOTED==APPC0123I|\
- Stack {0} snapshoted, snapshot ID = [{1}].|\
- No resolution is required|\
- Stack snapshoted successfully.
-
-
-RESTORING_STACK=APPC0124I|\
- Stack {0} is being restored to snapshot {1}...|\
- No resolution is required|\
- Stack restore.
-
-STACK_RESTORED=APPC0125I|\
- Stack {0} is restored to snapshot {1}.|\
- No resolution is required|\
- Stack restored successfully.
-
-MISSING_PARAMETER_IN_REQUEST=APPC0126E|\
- Parameter {0} is missing in svc request of {1}.|\
- Check DG node definition to pass missing parameter's value.|\
- Node definition in DG missing indicated parameter value or value is incorrect, \
- check the graph definition.
-
-CANNOT_ESTABLISH_CONNECTION=APPC0127E|\
- Cannot establish connection to server {0} port {1} with user {2}.|\
- Check server IP, port and user credentials.|\
- Wrong data sent in request's payload.
-
-
-APPC_METRIC_MSG=APPC0128I|\
- Operation "{0}" for VNF type "{1}" from Source "{2}" with RequestID "{3}" on "{4}" with action "{5}" \
- ended in {6} ms with result "{7}"|\
- No resolution is required, this is an informational message|\
- This message indicates that the APPC logged some operation to metric
-
- SNAPSHOTING_SERVER=APPC0129I|\
-{0} IAAS Adapter create snapshot of server requested|\
-No resolution is required, this is an informational message|\
-This message indicates that a IAAS Adapter create snapshot of server was requested.
-
-INPUT_PAYLOAD_PARSING_FAILED = APPC0130E|\
- Failed to parsing the input payload: {0}|\
- Please provide correct input string for parsing.|\
- .
-
-APPC_EXCEPTION = APPC0132E|\
- Error occurred for VNF type : {0}, reason {1}|\
- Runtime exception thrown by APPC.|\
- .
-
-SSH_DATA_EXCEPTION = APPC0133E|\
- SSH Data Exception occurred, reason {0}|\
- SSH Data exception occurred.|\
- .
-
-JSON_PROCESSING_EXCEPTION = APPC0134E|\
- Json processing exception occurred, reason {0}|\
- Json processing Exception|\
- .
-
-SUCCESS_EVENT_MESSAGE = APPC0136I|\
- Operation {0} succeed for {1}|\
- Success message.|\
- .
-DEPENDENCY_MODEL_NOT_FOUND = APPC0137E|\
- Dependency model not found for VNF type {0}, reason {1}|\
- Please provide dependency model|\
- .
-
-INVALID_DEPENDENCY_MODEL = APPC0138E|\
- Invalid Dependency model for VNF Type {0}, reason {1}|\
- Invalid dependency model found |\
- .
-
-
-FAILURE_RETRIEVE_VNFC_DG = APPC0139E|\
- Failed to retrieve DG for VNFC Type: {0}|\
- Failed to retrieve VNFC DG |\
- .
-
-
-SERVER_NETWORK_ERROR=APPC0140E|\
- Server {0} either has a port {1} that is NOT online, or the status of the network to which the port is connected to is not ACTIVE|\
- Please ensure they are UP and running before requested operation|\
- It is critical that the VM Server is reachable by the Provider(ex: OpenStack) in order to be able to perform \
- the requested operation on it.
- .
-
-REBUILD_SERVER=APPC0140I|\
- Server {0} is being rebuilt...|\
- No recovery required|\
- The processing being performed by APPC requires that the indicated server be rebuilt.
-
-HYPERVISOR_DOWN_ERROR=APPC0141E|\
- Hypervisor {0} for the Server {1} is either NOT ENABLED, or its status is DOWN or UNKNOWN|\
- Please ensure the Hypervisor is UP and running before proceeding with the requested operation|\
- It is critical that the Hypervisor that manages the Virtual Machine for the Server is reachable by the Provider(ex: OpenStack) in order to be able to perform \
- the requested operation on it.
- .
-
-HYPERVISOR_STATUS_UKNOWN=APPC0158E|\
- Unable to determine the status of the Hypervisor for the Server {0} |\
- Please ensure the userid has privileges enabled to query for the Hypervisor status. |\
- If you wish to proceed with the requested operation, either obtain the privileges from the Cloud provider, or skip the Hypervisor check and retry the request.
- .
-
-HYPERVISOR_NETWORK_ERROR=APPC0142E|\
- Hypervisor {0} for the Server {1} is NOT Reachable by APPC for initiating the requested operation|\
- Please ensure the Hypervisor is connected to the network before proceeding with the requested operation|\
- It is critical that the Hypervisor that manages the Virtual Machine for the Server is reachable by the Provider(ex: OpenStack) in order to be able to perform \
- the requested operation on it.
-
-EVACUATE_SERVER_REBUILD_FAILED=APPC0143E|\
- Server {0} evacuate from host {1} to host {2} failed during the rebuild on host {2}, reason {3}|\
- The server rebuild after evacuation failed for the indicated reason. Correct the cause of the failure and \
- run a rebuild, if applicable.|\
- The adapter has attempted to rebuild after evacuating the indicated server but the rebuild request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-RESTART_APPLICATION=APPC0144I|\
- Application on server {0} is being restarted...|\
- No recovery required|\
- The processing being performed by APPC requires that the application on the indicated server be restarted.
-
-START_APPLICATION=APPC0145I|\
- Application on server {0} is being started...|\
- No recovery required|\
- The processing being performed by APPC requires that the application on the indicated server be started.
-
-APPLICATION_RESTART_FAILED=APPC0146E|\
- Restart application operation failed on server : {0}, reason {1}|\
- Restart application operation failure.|\
- Correct the cause of the failure as indicated by the reason.
-
-APPLICATION_START_FAILED=APPC0147E|\
- Start application operation failed on server : {0}, reason {1}|\
- Start application operation failure.|\
- Correct the cause of the failure as indicated by the reason.
-
-LOOKING_SERVER_UP=APPC0148I|\
-{0} IAAS Adapter looking up for the server requested|\
-No resolution is required, this is an informational message|\
-This message indicates that a IAAS Adapter lookup of server was requested.
-
-EVACUATE_SERVER_REBUILD_FAILED=APPC0149E|\
- Server {0} evacuate from host {1} to host {2} failed during the rebuild on host {2}, reason {3}|\
- The server rebuild after evacuation failed for the indicated reason. Correct the cause of the failure and \
- run a rebuild, if applicable.|\
- The adapter has attempted to rebuild after evacuating the indicated server but the rebuild request has \
- been failed by the provider for some reason. The reason returned by the provider is \
- included in the message.
-
-APPLICATION_STOP_FAILED=APPC0150E|\
- Stop application operation failed on server : {0}, reason {1}|\
- Stop application operation failure.|\
- Correct the cause of the failure as indicated by the reason.
-
-STOP_APPLICATION=APPC0151I|\
- Application on server {0} is being stopped...|\
- No recovery required|\
- The processing being performed by APPC requires that the application on the indicated server be stopped.
-
-LCM_OPERATIONS_DISABLED=APPC0152E|\
- APPC LCM operations have been administratively disabled|\
- No recovery required|\
- This is a indication that the APPC LCM operations are disabled.
-
-OAM_OPERATION_EXCEPTION=APPC0153E|\
- Application {0} received exception {1} while attempting to execute oam operation {2}, exception message = {3}|\
- The application controller attempted to perform an OAM operation \
- but an exception was caught. The class of the \
- exception is shown, as is the message associated with the exception. An \
- abbreviated stack trace is also displayed to provide information as to the \
- state of the thread at the time of the exception.|\
- Correct the cause of the exception and rerun.
-
-OAM_OPERATION_ENTERING_MAINTENANCE_MODE=APPC0154W|\
- Application {0} is {1}|\
- No recovery required|\
- The APPC will no longer accept new LCM requests. Previously accepted LCM requests will be allowed to complete.
-
-OAM_OPERATION_MAINTENANCE_MODE=APPC0155W|\
- Application {0} is in {1}|\
- No recovery required|\
- The APPC is not accepting new LCM requests and all previously accepted LCM requests have completed.
-
-OAM_OPERATION_STARTING=APPC0156I|\
- Application {0} is {1}|\
- No recovery required|\
- The APPC has initiated its startup procedure. Its internal components are coming online. Once completed it will start accepting LCM requests.
-
-OAM_OPERATION_STARTED=APPC0157I|\
- Application {0} is {1}|\
- No recovery required|\
- The APPC will now accept new LCM requests for processing.
-
-INVALID_STATE_TRANSITION=APPC0158E|\
- A {1} API is not allowed when {0} in the {2} state|\
- No recovery required|\
- The Operation requested cannot be performed as per the current state of APPC.
-
-OAM_OPERATION_STOPPING=APPC0159W|\
- Application {0} is {1}|\
- No recovery required|\
- The APPC has initiated its stop procedure. Its internal LCM bundles are stopping.
-
-OAM_OPERATION_STOPPED=APPC0160W|\
- Application {0} is {1}|\
- No recovery required|\
- The APPC LCM bundles have now stopped.
-
-REQUEST_HANDLER_UNAVAILABLE=APPC0161E|\
- Application {0} was unable to find the Request Handler service |\
- The application controller attempted to get a handle on Request Handler service \
- but was unable to locate it in the OSGi Service Registry.|\
- Verify if the Request Handler bundle is running.
-
-OAM_OPERATION_RESTARTING=APPC0162W|\
- Application {0} is {1}|\
- No recovery required|\
- The APPC has initiated its restart procedure. Its internal LCM bundles are stopping and will then start again.
-
-OAM_OPERATION_RESTARTED=APPC0163W|\
- Application {0} is {1} for restart|\
- No recovery required|\
- The APPC LCM bundles have been restared (stopped and then started).
-
-OAM_OPERATION_INVALID_INPUT=APPC0162E|\
- {0}|\
- No recovery required|\
- Fix the input parameter and retry.
-
-IAAS_UNSUPPORTED_IDENTITY_SERVICE=APPC0163E|\
- Unsupported identity service version, unable to retrieve ServiceCatalog for identity service {0}|\
- Verify the identity url provided is correct. Currently supported version of the OpenStack identity servicer\
- are v2 and v3. If a support for a new version in required contact development.|\
- This message indicates that a request was made to connect to an unsupported version of \
- identity service.
-
-SFTP_TRANSFER_FAILED=APPC0164E|\
- Sftp data transfer failed on connection to host {0} with user {1} for {2} operation, reason : {3}|\
- Correct the cause of the failure as indicated by the reason and retry.|\
- This message indicates that a failure occured during data transfer over sftp connection.\
- The reason returned by the target instance is included in the message.
-
-SSH_CONNECTION_TIMEOUT=APPC0165E|\
- Ssh session with host {0} has timed out during command {1} execution|\
- Check connection to host and validate executed command.|\
- The APPC tried to execute ssh command on specified host, and the execution took longer time than expected.
-
-SSH_SESSION_CONFIG_ERROR=APPC0166E|\
- Could not configure existing ssh session, reason: {0}|\
- Correct the cause of the failure as indicated by the reason.|\
- This message indicates that additional configuration for already opened ssh session has failed.\
- The reason returned by the session provider is included in the message.
-
-REBOOT_SERVER=APPC0167I|\
- {0} IAAS Adapter reboot of server requested|\
- No resolution required|\
- A graph has invoked the IAAS adapter and has requested the reboot of a server. The \
- properties that govern the request are echoed immediately following this message.
Code Review / appc.git / blobdiff