#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
tosca_definitions_version: tosca_simple_yaml_1_1
imports:
- data.yml
policy_types:
  tosca.policies.Root:
    description: The TOSCA Policy Type all other TOSCA Policy Types derive from
  tosca.policies.Placement:
    derived_from: tosca.policies.Root
    description: The TOSCA Policy Type definition that is used to govern placement of TOSCA nodes or groups of nodes.
  tosca.policies.Scaling:
    derived_from: tosca.policies.Root
    description: The TOSCA Policy Type definition that is used to govern scaling of TOSCA nodes or groups of nodes.
  tosca.policies.Update:
    derived_from: tosca.policies.Root
    description: The TOSCA Policy Type definition that is used to govern update of TOSCA nodes or groups of nodes.
  tosca.policies.Performance:
    derived_from: tosca.policies.Root
    description: The TOSCA Policy Type definition that is used to declare performance requirements for TOSCA nodes or groups of nodes.
  org.openecomp.policies.placement.Antilocate:
    derived_from: tosca.policies.Placement
    description: My placement policy for separation based upon container type value
    properties:
      name:
        type: string
        description: The name of the policy
        required: false
        status: SUPPORTED
      container_type:
        type: string
        description: container type
        required: false
        status: SUPPORTED
        constraints:
        - valid_values:
          - host
          - region
          - compute
  org.openecomp.policies.placement.Colocate:
    derived_from: tosca.policies.Placement
    description: Keep associated nodes (groups of nodes) based upon affinity value
    properties:
      name:
        type: string
        description: The name of the policy
        required: false
        status: SUPPORTED
      affinity:
        type: string
        description: affinity
        required: true
        status: SUPPORTED
        constraints:
        - valid_values:
          - host
          - region
          - compute
  org.openecomp.policies.placement.valet.Diversity:
    derived_from: tosca.policies.Placement
    description: Valet Diversity
    properties:
      level:
        type: string
        description: diversity
        required: false
        default: host
        status: SUPPORTED
        constraints:
        - valid_values:
          - host
          - rack
  org.openecomp.policies.placement.valet.Exclusivity:
    derived_from: tosca.policies.Placement
    description: Valet Exclusivity
    properties:
      level:
        type: string
        description: exclusivity
        required: false
        default: host
        status: SUPPORTED
        constraints:
        - valid_values:
          - host
          - rack
  org.openecomp.policies.placement.valet.Affinity:
    derived_from: tosca.policies.Placement
    description: Valet Affinity
    properties:
      level:
        type: string
        description: affinity
        required: false
        default: host
        status: SUPPORTED
        constraints:
        - valid_values:
          - host
          - rack
  org.openecomp.policies.scaling.Fixed:
    derived_from: tosca.policies.Scaling
    properties:
      quantity:
        description: the exact number of instances to keep up
        type: integer
        required: true
  org.openecomp.policies.External:
    derived_from: tosca.policies.Root
    description: externally managed policy (for example, type="network assignment", source="Policy Manager", name="route target")
    properties:
      source:
        type: string
        description: The name of the server that exposes the policy with predefined type and name.
        required: false
      type:
        type: string
        description: The type (category) of the policy same as it is defined in the source.
        required: false
      name:
        type: string
        description: The name of the policy, that related to specific type, same as it is defined in the source.
        required: false
  onap.policies.Monitoring:
    derived_from: tosca.policies.Root
    description: A base policy type for all policies that governs monitoring provisioning
  onap.policies.monitoring.cdap.tca.hi.lo.app:
    derived_from: onap.policies.Monitoring
    version: 1.0.0
    properties:
      tca_policy:
        type: map
        description: TCA Policy JSON
        entry_schema:
          type: onap.datatypes.monitoring.tca_policy
  tosca.policies.nfv.InstantiationLevels:
    derived_from: tosca.policies.Root
    description: The InstantiationLevels type is a policy type representing all the instantiation levels of resources to be instantiated within a deployment flavour and including default instantiation level in term of the number of VNFC instances to be created as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      levels:
        type: map
        description: Describes the various levels of resources that can be used to instantiate the VNF using this flavour.
        required: true
        entry_schema:
          type: tosca.datatypes.nfv.InstantiationLevel
      default_level:
        type: string
        description: The default instantiation level for this flavour.
        required: false
  tosca.policies.nfv.VduInstantiationLevels:
    derived_from: tosca.policies.Root
    description: The VduInstantiationLevels type is a policy type representing all the instantiation levels of resources to be instantiated within a deployment flavour in term of the number of VNFC instances to be created from each vdu.Compute. as defined in ETSI GS NFV-IFA 011 [1]
    properties:
      levels:
        type: map
        description: Describes the Vdu.Compute levels of resources that can be used to instantiate the VNF using this flavour
        required: true
        entry_schema:
          type: tosca.datatypes.nfv.VduLevel
    targets:
    - tosca.nodes.nfv.Vdu.Compute
  tosca.policies.nfv.VirtualLinkInstantiationLevels:
    derived_from: tosca.policies.Root
    description: The VirtualLinkInstantiationLevels type is a policy type representing all the instantiation levels of virtual link resources to be instantiated within a deployment flavour as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      levels:
        type: map
        description: Describes the virtual link levels of resources that can be used to instantiate the VNF using this flavour.
        required: true
        entry_schema:
          type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
    targets:
    - tosca.nodes.nfv.VnfVirtualLink
  tosca.policies.nfv.ScalingAspects:
    derived_from: tosca.policies.Root
    description: The ScalingAspects type is a policy type representing the scaling aspects used for horizontal scaling as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      aspects:
        type: map
        description: Describe maximum scale level for total number of scaling steps that can be applied to a particular aspect
        required: true
        entry_schema:
          type: tosca.datatypes.nfv.ScalingAspect
  tosca.policies.nfv.VduScalingAspectDeltas:
    derived_from: tosca.policies.Root
    description: The VduScalingAspectDeltas type is a policy type representing the Vdu.Compute detail of an aspect deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      aspect:
        type: string
        description: Represents the scaling aspect to which this policy applies
        required: true
      deltas:
        type: map
        description: Describes the Vdu.Compute scaling deltas to be applied for every scaling steps of a particular aspect.
        required: true
        entry_schema:
          type: tosca.datatypes.nfv.VduLevel
    targets:
    - tosca.nodes.nfv.Vdu.Compute
  tosca.policies.nfv.VirtualLinkBitrateScalingAspectDeltas:
    derived_from: tosca.policies.Root
    description: The VirtualLinkBitrateScalingAspectDeltas type is a policy type representing the VnfVirtualLink detail of an aspect deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      aspect:
        type: string
        description: Represents the scaling aspect to which this policy applies.
        required: true
      deltas:
        type: map
        description: Describes the VnfVirtualLink scaling deltas to be applied for every scaling steps of a particular aspect.
        required: true
        entry_schema:
          type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
    targets:
    - tosca.nodes.nfv.VnfVirtualLink
  tosca.policies.nfv.VduInitialDelta:
    derived_from: tosca.policies.Root
    description: The VduInitialDelta type is a policy type representing the Vdu.Compute detail of an initial delta used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      initial_delta:
        type: tosca.datatypes.nfv.VduLevel
        description: Represents the initial minimum size of the VNF.
        required: true
    targets:
    - tosca.nodes.nfv.Vdu.Compute
  tosca.policies.nfv.VirtualLinkBitrateInitialDelta:
    derived_from: tosca.policies.Root
    description: The VirtualLinkBitrateInitialDelta type is a policy type representing the VnfVirtualLink detail of an initial deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      initial_delta:
        type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
        description: Represents the initial minimum size of the VNF.
        required: true
    targets:
    - tosca.nodes.nfv.VnfVirtualLink
  tosca.policies.nfv.SecurityGroupRule:
    derived_from: tosca.policies.Root
    description: The SecurityGroupRule type is a policy type specified the matching criteria for the ingress and/or egress traffic to/from visited connection points as defined in ETSI GS NFV-IFA 011 [1].
    properties:
      description:
        type: string
        description: Human readable description of the security group rule.
        required: false
      direction:
        type: string
        description: The direction in which the security group rule is applied. The direction of 'ingress' or 'egress' is specified against the associated CP. I.e., 'ingress' means the packets entering a CP, while 'egress' means the packets sent out of a CP.
        required: false
        constraints:
        - valid_values:
          - ingress
          - egress
        default: ingress
      ether_type:
        type: string
        description: Indicates the protocol carried over the Ethernet layer.
        required: false
        constraints:
        - valid_values:
          - ipv4
          - ipv6
        default: ipv4
      protocol:
        type: string
        description: Indicates the protocol carried over the IP layer. Permitted values include any protocol defined in the IANA protocol registry, e.g. TCP, UDP, ICMP, etc.
        required: false
        constraints:
        - valid_values:
          - hopopt
          - icmp
          - igmp
          - ggp
          - ipv4
          - st
          - tcp
          - cbt
          - egp
          - igp
          - bbn_rcc_mon
          - nvp_ii
          - pup
          - argus
          - emcon
          - xnet
          - chaos
          - udp
          - mux
          - dcn_meas
          - hmp
          - prm
          - xns_idp
          - trunk_1
          - trunk_2
          - leaf_1
          - leaf_2
          - rdp
          - irtp
          - iso_tp4
          - netblt
          - mfe_nsp
          - merit_inp
          - dccp
          - 3pc
          - idpr
          - xtp
          - ddp
          - idpr_cmtp
          - tp++
          - il
          - ipv6
          - sdrp
          - ipv6_route
          - ipv6_frag
          - idrp
          - rsvp
          - gre
          - dsr
          - bna
          - esp
          - ah
          - i_nlsp
          - swipe
          - narp
          - mobile
          - tlsp
          - skip
          - ipv6_icmp
          - ipv6_no_nxt
          - ipv6_opts
          - cftp
          - sat_expak
          - kryptolan
          - rvd
          - ippc
          - sat_mon
          - visa
          - ipcv
          - cpnx
          - cphb
          - wsn
          - pvp
          - br_sat_mon
          - sun_nd
          - wb_mon
          - wb_expak
          - iso_ip
          - vmtp
          - secure_vmtp
          - vines
          - ttp
          - iptm
          - nsfnet_igp
          - dgp
          - tcf
          - eigrp
          - ospfigp
          - sprite_rpc
          - larp
          - mtp
          - ax.25
          - ipip
          - micp
          - scc_sp
          - etherip
          - encap
          - gmtp
          - ifmp
          - pnni
          - pim
          - aris
          - scps
          - qnx
          - a/n
          - ip_comp
          - snp
          - compaq_peer
          - ipx_in_ip
          - vrrp
          - pgm
          - l2tp
          - ddx
          - iatp
          - stp
          - srp
          - uti
          - smp
          - sm
          - ptp
          - isis
          - fire
          - crtp
          - crudp
          - sscopmce
          - iplt
          - sps
          - pipe
          - sctp
          - fc
          - rsvp_e2e_ignore
          - mobility
          - udp_lite
          - mpls_in_ip
          - manet
          - hip
          - shim6
          - wesp
          - rohc
        default: tcp
      port_range_min:
        type: integer
        description: Indicates minimum port number in the range that is matched by the security group rule. If a value is provided at design-time, this value may be overridden at run-time based on other deployment requirements or constraints.
        required: false
        constraints:
        - greater_or_equal: 0
        - less_or_equal: 65535
        default: 0
      port_range_max:
        type: integer
        description: Indicates maximum port number in the range that is matched by the security group rule. If a value is provided at design-time, this value may be overridden at run-time based on other deployment requirements or constraints.
        required: false
        constraints:
        - greater_or_equal: 0
        - less_or_equal: 65535
        default: 65535
    targets:
    - tosca.nodes.nfv.VduCp
    - tosca.nodes.nfv.VnfExtCp
  tosca.policies.nfv.SupportedVnfInterface:
    derived_from: tosca.policies.Root
    description: this policy type represents interfaces produced by a VNF, the details to access them and the applicable connection points to use to access these interfaces
    properties:
      interface_name:
        type: string
        description: Identifies an interface produced by the VNF.
        required: true
        constraints:
        - valid_values:
          - vnf_indicator
          - vnf_configuration
      details:
        type: tosca.datatypes.nfv.InterfaceDetails
        description: Provide additional data to access the interface endpoint
        required: false
    targets:
    - tosca.nodes.nfv.VnfExtCp
    - tosca.nodes.nfv.VduCp
  tosca.policies.nfv.AffinityRule:
    derived_from: tosca.policies.Placement
    description: The AffinityRule describes the affinity rules applicable for the defined targets
    properties:
      scope:
        type: string
        description: scope of the rule is an NFVI_node, an NFVI_PoP, etc.
        required: true
        constraints:
        - valid_values:
          - nfvi_node
          - zone
          - zone_group
          - nfvi_pop
    targets:
    - tosca.nodes.nfv.Vdu.Compute
    - tosca.nodes.nfv.VnfVirtualLink
    - tosca.groups.nfv.PlacementGroup
  tosca.policies.nfv.AntiAffinityRule:
    derived_from: tosca.policies.Placement
    description: The AntiAffinityRule describes the anti-affinity rules applicable for the defined targets
    properties:
      scope:
        type: string
        description: scope of the rule is an NFVI_node, an NFVI_PoP, etc.
        required: true
        constraints:
        - valid_values:
          - nfvi_node
          - zone
          - zone_group
          - nfvi_pop
    targets:
    - tosca.nodes.nfv.Vdu.Compute
    - tosca.nodes.nfv.VnfVirtualLink
    - tosca.groups.nfv.PlacementGroup