.. This work is licensed under a .. Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 .. _pap-s3p-label: .. toctree:: :maxdepth: 2 Policy PAP component ~~~~~~~~~~~~~~~~~~~~ 72 Hours Stability Test of PAP ++++++++++++++++++++++++++++++ Introduction ------------ The 72 hour Stability Test for PAP has the goal of introducing a steady flow of transactions initiated from a test client server running JMeter for the duration of 72 hours. Setup details ------------- The stability test is performed on VM's running in OpenStack cloud environment. There are 2 seperate VM's, one for running PAP & other one for running JMeter to simulate steady flow of transactions. All the dependencies like mariadb, dmaap simulator, pdp simulator & policy/api component are installed in the VM having JMeter. For simplicity lets assume VM1 will be running JMeter, MariaDB, DMaaP simulator, PDP simulator & API component. VM2 will be running only PAP component. **OpenStack environment details** Version: Mitaka **PAP VM details (VM2)** OS:Ubuntu 16.04 LTS CPU: 4 core RAM: 4 GB HardDisk: 40 GB Docker version 19.03.8 Java: openjdk version "11.0.7" 2020-04-14 **JMeter VM details (VM1)** OS: Ubuntu 16.04 LTS CPU: 4 core RAM: 4 GB HardDisk: 40 GB Docker Version: 18.09.6 Java: openjdk version "11.0.7" 2020-04-14 JMeter: 5.2.1 Install Docker in VM1 & VM2 --------------------------- Make sure to execute below commands in VM1 & VM2 both. Make the etc/hosts entries .. code-block:: bash $ echo $(hostname -I | cut -d\ -f1) $(hostname) | sudo tee -a /etc/hosts Make the DNS entries .. code-block:: bash $ echo "nameserver " >> /etc/resolvconf/resolv.conf.d/head $ echo "nameserver " >> /etc/resolvconf/resolv.conf.d/head $ resolvconf -u Update the ubuntu software installer .. code-block:: bash $ apt-get update Check and Install Java .. code-block:: bash $ apt-get install -y openjdk-11-jdk $ java -version Ensure that the Java version that is executing is OpenJDK version 8 Check and install docker .. code-block:: bash $ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add - $ add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" $ apt-get update $ apt-cache policy docker-ce $ apt-get install -y docker-ce $ systemctl status docker $ docker ps Change the permissions of the Docker socket file .. code-block:: bash $ chmod 777 /var/run/docker.sock Check the status of the Docker service and ensure it is running correctly .. code-block:: bash $ service docker status $ docker ps Install JMeter in VM1 --------------------- Download & install JMeter .. code-block:: bash $ mkdir jMeter $ cd jMeter $ wget http://mirrors.whoishostingthis.com/apache//jmeter/binaries/apache-jmeter-5.2.1.zip $ unzip apache-jmeter-5.2.1.zip Run JMeter .. code-block:: bash $ /home/ubuntu/jMeter/apache-jmeter-5.2.1/bin/jmeter The above command will load the JMeter UI. Then navigate to File ā†’ Open ā†’ Browse and select the test plan jmx file to open. The jmx file is present in the policy/pap git repository. Install simulators in VM1 ------------------------- For installing simulator, there is a script placed at `install simulator script `_ Copy the script & all related files in virtual machine and run it. After installation make sure that following 4 docker containers are up and running. .. code-block:: bash root@policytest-policytest-3-p5djn6as2477:/home/ubuntu/simulator# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 887efa8dac12 nexus3.onap.org:10001/onap/policy-api "bash ./policy-api.sh" 6 days ago Up 6 days 0.0.0.0:6969->6969/tcp policy-api 0a931c0a63ac pdp/simulator:latest "bash pdp-sim.sh" 6 days ago Up 6 days pdp-simulator a41adcb32afb dmaap/simulator:latest "bash dmaap-sim.sh" 6 days ago Up 6 days 0.0.0.0:3904->3904/tcp dmaap-simulator d52d6b750ba0 mariadb:10.2.14 "docker-entrypoint.sā€¦" 6 days ago Up 6 days 0.0.0.0:3306->3306/tcp mariadb Install PAP in VM2 ------------------ For installing PAP, there is a script placed at `install pap script `_ Copy the script & all related files in virtual machine and run it. After installation make sure that following docker container is up and running. .. code-block:: bash root@policytest-policytest-0-uc3y2h5x6p4j:/home/ubuntu/pap# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 42ac0ed4b713 nexus3.onap.org:10001/onap/policy-pap:2.2.3-SNAPSHOT "bash ./policy-pap.sh" 3 days ago Up 3 days 0.0.0.0:6969->6969/tcp, 0.0.0.0:9090->9090/tcp policy-pap Install & configure visualVM in VM2 ----------------------------------- visualVM needs to be installed in the virtual machine having PAP. It will be used to monitor CPU, Memory, GC for PAP while stability test is running. Install visualVM .. code-block:: bash $ sudo apt-get install visualvm Run few commands to configure permissions .. code-block:: bash $ cd /usr/lib/jvm/java-11-openjdk-amd64/bin/ $ sudo touch visualvm.policy $ sudo chmod 777 visualvm.policy $ vi visualvm.policy Add the following in visualvm.policy grant codebase "file:/usr/lib/jvm/java-11-openjdk-amd64/lib/tools.jar" { permission java.security.AllPermission; }; Run following commands to start jstatd using port 1111 .. code-block:: bash $ cd /usr/lib/jvm/java-11-openjdk-amd64/bin/ $ ./jstatd -p 1111 -J-Djava.security.policy=visualvm.policy & Run visualVM locally to connect to remote VM2 .. code-block:: bash # On your windows machine or your linux box locally, launch visualVM $ nohup visualvm Connect to jstatd & remote apex-pdp JVM 1. Right click on "Remote" in the left panel of the screen and select "Add Remote Host..." 2. Enter the IP address of VM2. 3. Right click on IP address, select "Add JMX Connection..." 4. Enter the VM2 IP Address (from step 2) :9090 ( for example -10.12.6.201:9090) and click OK. 5. Double click on the newly added nodes under "Remote" to start monitoring CPU, Memory & GC. Sample Screenshot of visualVM .. image:: images/pap-s3p-vvm-sample.png Test Plan --------- The 72 hours stability test will run the following steps sequentially in a single threaded loop. - **Create Policy Type** - creates an operational policy type using policy/api component - **Create Policy defaultDomain** - creates an operational policy using the policy type created in the above step using policy/api component - **Create Policy sampleDomain** - creates an operational policy using the policy type created in the above step using policy/api component - **Check Health** - checks the health status of pap - **Check Statistics** - checks the statistics of pap - **Change state to ACTIVE** - changes the state of defaultGroup PdpGroup to ACTIVE - **Check PdpGroup Query** - makes a PdpGroup query request and verifies that PdpGroup is in the ACTIVE state. - **Deploy defaultDomain Policy** - deploys the policy defaultDomain in the existing PdpGroup - **Create/Update PDP Group** - creates a new PDPGroup named sampleGroup. - **OS Process Sampler** - OS Process Sampler to start a new Pdp Instance - **Check PdpGroup Query** - makes a PdpGroup query request and verifies that 2 PdpGroups are in the ACTIVE state and defaultGroup has a policy deployed on it. - **Deployment Update sampleDomain** - deploys the policy sampleDomain in sampleGroup PdpGroup using pap api - **Check PdpGroup Query** - makes a PdpGroup query request and verifies that the defaultGroup has a policy defaultDomain deployed on it and sampleGroup has policy sampleDomain deployed on it. - **Check Deployed Policies** - checks for all the deployed policies using pap api. - **OS Process Sampler** - OS Process Sampler to stop the newly created Pdp Instance - **Undeploy Policy sampleDomain** - undeploys the policy sampleDomain from sampleGroup PdpGroup using pap api - **Undeploy Default Policy** - undeploys the policy defaultDomain from PdpGroup - **Change state to PASSIVE(sampleGroup)** - changes the state of sampleGroup PdpGroup to PASSIVE - **Delete PdpGroup SampleGroup** - delete the sampleGroup PdpGroup using pap api - **Change State to PASSIVE(defaultGroup)** - changes the state of defaultGroup PdpGroup to PASSIVE - **Check PdpGroup Query** - makes a PdpGroup query request and verifies that PdpGroup is in the PASSIVE state. - **Delete Policy defaultDomain** - deletes the operational policy defaultDomain using policy/api component - **Delete Policy sampleDomain** - deletes the operational policy sampleDomain using policy/api component - **Delete Policy Type** - deletes the operational policy type using policy/api component The following steps can be used to configure the parameters of test plan. - **HTTP Authorization Manager** - used to store user/password authentication details. - **HTTP Header Manager** - used to store headers which will be used for making HTTP requests. - **User Defined Variables** - used to store following user defined parameters. =========== =================================================================== **Name** **Description** =========== =================================================================== PAP_HOST IP Address or host name of PAP component PAP_PORT Port number of PAP for making REST API calls API_HOST IP Address or host name of API component API_PORT Port number of API for making REST API calls DIR Path where the pdp instance startup and stop script is placed CONFIG_DIR Path where the pdp default Config file is placed =========== =================================================================== Screenshot of PAP stability test plan .. image:: images/pap-s3p-testplan.png Test Results ------------ **Summary** Stability test plan was triggered for 72 hours. **Test Statistics** ======================= ================= ================== ================================== **Total # of requests** **Success %** **Error %** **Average time taken per request** ======================= ================= ================== ================================== 178208 100 % 0 % 76 ms ======================= ================= ================== ================================== **VisualVM Screenshot** .. image:: images/pap-s3p-vvm-1.png .. image:: images/pap-s3p-vvm-2.png **JMeter Screenshot** .. image:: images/pap-s3p-jm-1.png .. image:: images/pap-s3p-jm-1.png Test Results Frankfurt release ------------------------------- **Summary** Stability test plan was triggered for 72 hours. .. Note:: .. container:: paragraph Test cases for starting and stopping the PDP Instance has been included in the test plan. These test cases have resulted in a spike in the Average time taken per request. **Test Statistics** ======================= ================= ================== ================================== **Total # of requests** **Success %** **Error %** **Average time taken per request** ======================= ================= ================== ================================== 29423 100 % 0 % 948 ms ======================= ================= ================== ================================== **VisualVM Screenshot** .. image:: images/pap-s3p-vvm-1_F.png .. image:: images/pap-s3p-vvm-2_F.png **JMeter Screenshot** .. image:: images/pap-s3p-jm-1_F.png .. image:: images/pap-s3p-jm-1_F.png