name|content|checksum ietf-inet-types.yang|"module ietf-inet-types { namespace \"urn:ietf:params:xml:ns:yang:ietf-inet-types\"; prefix \"inet\"; organization \"IETF NETMOD (NETCONF Data Modeling Language) Working Group\"; contact \"WG Web: WG List: WG Chair: David Kessens WG Chair: Juergen Schoenwaelder Editor: Juergen Schoenwaelder \"; description \"This module contains a collection of generally useful derived YANG data types for Internet addresses and related things. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust''s Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 6991; see the RFC itself for full legal notices.\"; revision 2013-07-15 { description \"This revision adds the following new data types: - ip-address-no-zone - ipv4-address-no-zone - ipv6-address-no-zone\"; reference \"RFC 6991: Common YANG Data Types\"; } revision 2010-09-24 { description \"Initial revision.\"; reference \"RFC 6021: Common YANG Data Types\"; } /*** collection of types related to protocol fields ***/ typedef ip-version { type enumeration { enum unknown { value \"0\"; description \"An unknown or unspecified version of the Internet protocol.\"; } enum ipv4 { value \"1\"; description \"The IPv4 protocol as defined in RFC 791.\"; } enum ipv6 { value \"2\"; description \"The IPv6 protocol as defined in RFC 2460.\"; } } description \"This value represents the version of the IP protocol. In the value set and its semantics, this type is equivalent to the InetVersion textual convention of the SMIv2.\"; reference \"RFC 791: Internet Protocol RFC 2460: Internet Protocol, Version 6 (IPv6) Specification RFC 4001: Textual Conventions for Internet Network Addresses\"; } typedef dscp { type uint8 { range \"0..63\"; } description \"The dscp type represents a Differentiated Services Code Point that may be used for marking packets in a traffic stream. In the value set and its semantics, this type is equivalent to the Dscp textual convention of the SMIv2.\"; reference \"RFC 3289: Management Information Base for the Differentiated Services Architecture RFC 2474: Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers RFC 2780: IANA Allocation Guidelines For Values In the Internet Protocol and Related Headers\"; } typedef ipv6-flow-label { type uint32 { range \"0..1048575\"; } description \"The ipv6-flow-label type represents the flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows. In the value set and its semantics, this type is equivalent to the IPv6FlowLabel textual convention of the SMIv2.\"; reference \"RFC 3595: Textual Conventions for IPv6 Flow Label RFC 2460: Internet Protocol, Version 6 (IPv6) Specification\"; } typedef port-number { type uint16 { range \"0..65535\"; } description \"The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP. Port numbers are assigned by IANA. A current list of all assignments is available from . Note that the port number value zero is reserved by IANA. In situations where the value zero does not make sense, it can be excluded by subtyping the port-number type. In the value set and its semantics, this type is equivalent to the InetPortNumber textual convention of the SMIv2.\"; reference \"RFC 768: User Datagram Protocol RFC 793: Transmission Control Protocol RFC 4960: Stream Control Transmission Protocol RFC 4340: Datagram Congestion Control Protocol (DCCP) RFC 4001: Textual Conventions for Internet Network Addresses\"; } /*** collection of types related to autonomous systems ***/ typedef as-number { type uint32; description \"The as-number type represents autonomous system numbers which identify an Autonomous System (AS). An AS is a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets within the AS, and using an exterior gateway protocol to route packets to other ASes. IANA maintains the AS number space and has delegated large parts to the regional registries. Autonomous system numbers were originally limited to 16 bits. BGP extensions have enlarged the autonomous system number space to 32 bits. This type therefore uses an uint32 base type without a range restriction in order to support a larger autonomous system number space. In the value set and its semantics, this type is equivalent to the InetAutonomousSystemNumber textual convention of the SMIv2.\"; reference \"RFC 1930: Guidelines for creation, selection, and registration of an Autonomous System (AS) RFC 4271: A Border Gateway Protocol 4 (BGP-4) RFC 4001: Textual Conventions for Internet Network Addresses RFC 6793: BGP Support for Four-Octet Autonomous System (AS) Number Space\"; } /*** collection of types related to IP addresses and hostnames ***/ typedef ip-address { type union { type inet:ipv4-address; type inet:ipv6-address; } description \"The ip-address type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type supports scoped addresses by allowing zone identifiers in the address format.\"; reference \"RFC 4007: IPv6 Scoped Address Architecture\"; } typedef ipv4-address { type string { pattern ''(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5]).){3}'' + ''([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'' + ''(%[p{N}p{L}]+)?''; } description \"The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format\"; } typedef ipv6-address { type string { pattern ''((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'' + ''((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'' + ''(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9]).){3}'' + ''(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'' + ''(%[p{N}p{L}]+)?''; pattern ''(([^:]+:){6}(([^:]+:[^:]+)|(.*..*)))|'' + ''((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'' + ''(%.+)?''; } description \"The ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007.\"; reference \"RFC 4291: IP Version 6 Addressing Architecture RFC 4007: IPv6 Scoped Address Architecture RFC 5952: A Recommendation for IPv6 Address Text Representation\"; } typedef ip-address-no-zone { type union { type inet:ipv4-address-no-zone; type inet:ipv6-address-no-zone; } description \"The ip-address-no-zone type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type does not support scoped addresses since it does not allow zone identifiers in the address format.\"; reference \"RFC 4007: IPv6 Scoped Address Architecture\"; } typedef ipv4-address-no-zone { type inet:ipv4-address { pattern ''[0-9.]*''; } description \"An IPv4 address without a zone index. This type, derived from ipv4-address, may be used in situations where the zone is known from the context and hence no zone index is needed.\"; } typedef ipv6-address-no-zone { type inet:ipv6-address { pattern ''[0-9a-fA-F:.]*''; } description \"An IPv6 address without a zone index. This type, derived from ipv6-address, may be used in situations where the zone is known from the context and hence no zone index is needed.\"; reference \"RFC 4291: IP Version 6 Addressing Architecture RFC 4007: IPv6 Scoped Address Architecture RFC 5952: A Recommendation for IPv6 Address Text Representation\"; } typedef ip-prefix { type union { type inet:ipv4-prefix; type inet:ipv6-prefix; } description \"The ip-prefix type represents an IP prefix and is IP version neutral. The format of the textual representations implies the IP version.\"; } typedef ipv4-prefix { type string { pattern ''(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5]).){3}'' + ''([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'' + ''/(([0-9])|([1-2][0-9])|(3[0-2]))''; } description \"The ipv4-prefix type represents an IPv4 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 32. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv4 prefix has all bits of the IPv4 address set to zero that are not part of the IPv4 prefix.\"; } typedef ipv6-prefix { type string { pattern ''((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'' + ''((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'' + ''(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9]).){3}'' + ''(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'' + ''(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))''; pattern ''(([^:]+:){6}(([^:]+:[^:]+)|(.*..*)))|'' + ''((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'' + ''(/.+)''; } description \"The ipv6-prefix type represents an IPv6 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The IPv6 address should have all bits that do not belong to the prefix set to zero. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952.\"; reference \"RFC 5952: A Recommendation for IPv6 Address Text Representation\"; } /*** collection of domain name and URI types ***/ typedef domain-name { type string { length \"1..253\"; pattern ''((([a-zA-Z0-9_]([a-zA-Z0-9-_]){0,61})?[a-zA-Z0-9].)*'' + ''([a-zA-Z0-9_]([a-zA-Z0-9-_]){0,61})?[a-zA-Z0-9].?)'' + ''|.''; } description \"The domain-name type represents a DNS domain name. The name SHOULD be fully qualified whenever possible. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. The description clause of schema nodes using the domain-name type MUST describe when and how these names are resolved to IP addresses. Note that the resolution of a domain-name value may require to query multiple DNS records (e.g., A for IPv4 and AAAA for IPv6). The order of the resolution process and which DNS record takes precedence can either be defined explicitly or may depend on the configuration of the resolver. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be A-labels as per RFC 5890.\"; reference \"RFC 952: DoD Internet Host Table Specification RFC 1034: Domain Names - Concepts and Facilities RFC 1123: Requirements for Internet Hosts -- Application and Support RFC 2782: A DNS RR for specifying the location of services (DNS SRV) RFC 5890: Internationalized Domain Names in Applications (IDNA): Definitions and Document Framework\"; } typedef host { type union { type inet:ip-address; type inet:domain-name; } description \"The host type represents either an IP address or a DNS domain name.\"; } typedef uri { type string; description \"The uri type represents a Uniform Resource Identifier (URI) as defined by STD 66. Objects using the uri type MUST be in US-ASCII encoding, and MUST be normalized as described by RFC 3986 Sections 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary percent-encoding is removed, and all case-insensitive characters are set to lowercase except for hexadecimal digits, which are normalized to uppercase as described in Section 6.2.2.1. The purpose of this normalization is to help provide unique URIs. Note that this normalization is not sufficient to provide uniqueness. Two URIs that are textually distinct after this normalization may still be equivalent. Objects using the uri type may restrict the schemes that they permit. For example, ''data:'' and ''urn:'' schemes might not be appropriate. A zero-length URI is not a valid URI. This can be used to express ''URI absent'' where required. In the value set and its semantics, this type is equivalent to the Uri SMIv2 textual convention defined in RFC 5017.\"; reference \"RFC 3986: Uniform Resource Identifier (URI): Generic Syntax RFC 3305: Report from the Joint W3C/IETF URI Planning Interest Group: Uniform Resource Identifiers (URIs), URLs, and Uniform Resource Names (URNs): Clarifications and Recommendations RFC 5017: MIB Textual Conventions for Uniform Resource Identifiers (URIs)\"; } }"|417a7b14944f6236ad0e2b1ef956158c050cff9b74e3561ca80af32d11be240b cps-ran-schema-model2021-01-28.yang|"module cps-ran-schema-model { yang-version 1.1; namespace \"org:onap:ccsdk:features:sdnr:northbound:cps-ran-schema-model\"; prefix rn; import ietf-inet-types { prefix inet; } import ietf-yang-types { prefix yang; } organization \"Open Network Automation Platform - ONAP \"; contact \"Editors: Sandeep Shah Swaminathan Seetharaman \"; description \"This module contains a collection of YANG definitions for capturing relationships among managed elements of the radio access Network to be stored in ONAP CPS platform. Copyright 2020-2021 IBM. Licensed under the Apache License, Version 2.0 (the ''License''); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an ''AS IS'' BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.\"; revision 2021-01-28 { description \"CPS RAN Network YANG Model for ONAP/O-RAN POC\"; reference \"https://wiki.onap.org/display/DW/E2E+Network+Slicing+Use+Case+in+R7+Guilin\"; } typedef usageState { type enumeration { enum IDLE { description \"TODO\"; } enum ACTIVE { description \"TODO\"; } enum BUSY { description \"TODO\"; } } description \"It describes whether or not the resource is actively in use at a specific instant, and if so, whether or not it has spare capacity for additional users at that instant. The value is READ-ONLY.\"; reference \"ITU T Recommendation X.731\"; } typedef Mcc { type string; description \"The mobile country code consists of three decimal digits, The first digit of the mobile country code identifies the geographic region (the digits 1 and 8 are not used):\"; reference \"3GPP TS 23.003 subclause 2.2 and 12.1\"; } typedef Mnc { type string; description \"The mobile network code consists of two or three decimal digits (for example: MNC of 001 is not the same as MNC of 01)\"; reference \"3GPP TS 23.003 subclause 2.2 and 12.1\"; } typedef Nci { type string; description \"NR Cell Identity. The NCI shall be of fixed length of 36 bits and shall be coded using full hexadecimal representation. The exact coding of the NCI is the responsibility of each PLMN operator\"; reference \"TS 23.003\"; } typedef OperationalState { type enumeration { enum DISABLED { value 0; description \"The resource is totally inoperable.\"; } enum ENABLED { value 1; description \"The resource is partially or fully operable.\"; } } description \"TODO\"; reference \"3GPP TS 28.625 and ITU-T X.731\"; } typedef AvailabilityStatus { type enumeration { enum IN_TEST { description \"TODO\"; } enum FAILED { description \"TODO\"; } enum POWER_OFF { description \"TODO\"; } enum OFF_LINE { description \"TODO\"; } enum OFF_DUTY { description \"TODO\"; } enum DEPENDENCY { description \"TODO\"; } enum DEGRADED { description \"TODO\"; } enum NOT_INSTALLED { description \"TODO\"; } enum LOG_FULL { description \"TODO\"; } } description \"TODO\"; reference \"TODO\"; } typedef CellState { type enumeration { enum IDLE { description \"TODO\"; } enum INACTIVE { description \"TODO\"; } enum ACTIVE { description \"TODO\"; } } description \"TODO\"; reference \"TODO\"; } typedef SNssai { type string; description \"Single Network Slice Selection Assistance Information.\"; reference \"TS 23.501 clause 5.15.2\"; } typedef Sst { type uint8; description \"TODO\"; reference \"TODO\"; } typedef Nrpci { type uint32; description \"Physical Cell Identity (PCI) of the NR cell.\"; reference \"TS 36.211 subclause 6.11\"; } typedef Tac { type int32 { range \"0..16777215\"; } description \"Tracking Area Code\"; reference \"TS 23.003 clause 19.4.2.3\"; } typedef AmfRegionId { type string; description \"\"; reference \"clause 2.10.1 of 3GPP TS 23.003\"; } typedef AmfSetId { type string; description \"\"; reference \"clause 2.10.1 of 3GPP TS 23.003\"; } typedef AmfPointer { type string; description \"\"; reference \"clause 2.10.1 of 3GPP TS 23.003\"; } // type definitions especially for core NFs typedef NfType { type enumeration { enum NRF { description \"TODO\"; } enum UDM { description \"TODO\"; } enum AMF { description \"TODO\"; } enum SMF { description \"TODO\"; } enum AUSF { description \"TODO\"; } enum NEF { description \"TODO\"; } enum PCF { description \"TODO\"; } enum SMSF { description \"TODO\"; } enum NSSF { description \"TODO\"; } enum UDR { description \"TODO\"; } enum LMF { description \"TODO\"; } enum GMLC { description \"TODO\"; } enum 5G_EIR { description \"TODO\"; } enum SEPP { description \"TODO\"; } enum UPF { description \"TODO\"; } enum N3IWF { description \"TODO\"; } enum AF { description \"TODO\"; } enum UDSF { description \"TODO\"; } enum BSF { description \"TODO\"; } enum CHF { description \"TODO\"; } } description \"TODO\"; } typedef NotificationType { type enumeration { enum N1_MESSAGES { description \"TODO\"; } enum N2_INFORMATION { description \"TODO\"; } enum LOCATION_NOTIFICATION { description \"TODO\"; } } description \"TODO\"; } typedef Load { type uint8 { range \"0..100\"; } description \"Latest known load information of the NF, percentage \"; } typedef N1MessageClass { type enumeration { enum 5GMM { description \"TODO\"; } enum SM { description \"TODO\"; } enum LPP { description \"TODO\"; } enum SMS { description \"TODO\"; } } description \"TODO\"; } typedef N2InformationClass { type enumeration { enum SM { description \"TODO\"; } enum NRPPA { description \"TODO\"; } enum PWS { description \"TODO\"; } enum PWS_BCAL { description \"TODO\"; } enum PWS_RF { description \"TODO\"; } } description \"TODO\"; reference \"TODO\"; } typedef NsiId { type string; description \"TODO\"; } typedef UeMobilityLevel { type enumeration { enum STATIONARY { description \"TODO\"; } enum NOMADIC { description \"TODO\"; } enum RESTRICTED_MOBILITY { description \"TODO\"; } enum FULLY_MOBILITY { description \"TODO\"; } } description \"TODO\"; reference \"TODO\"; } typedef ResourceSharingLevel { type enumeration { enum SHARED { description \"TODO\"; } enum NOT_SHARED { description \"TODO\"; } } description \"TODO\"; reference \"TODO\"; } typedef TxDirection { type enumeration { enum DL { description \"TODO\"; } enum UL { description \"TODO\"; } enum DL_AND_UL { description \"TODO\"; } } description \"TODO\"; reference \"TODO\"; } typedef DistinguishedName { // TODO is this equivalent to TS 32.300 ? type string; description \"Represents the international standard for the representation of Distinguished Name (RFC 4512). The format of the DistinguishedName REGEX is: {AttributeType = AttributeValue} AttributeType consists of alphanumeric and hyphen (OIDs not allowed). All other characters are restricted. The Attribute value cannot contain control characters or the following characters : \ > < ; \" + , (Comma) and White space The Attribute value can contain the following characters if they are excaped : \ > < ; \" + , (Comma) and White space The Attribute value can contain control characters if its an escaped double digit hex number. Examples could be UID=nobody@example.com,DC=example,DC=com CN=John Smith,OU=Sales,O=ACME Limited,L=Moab,ST=Utah,C=US\"; reference \"RFC 4512 Lightweight Directory Access Protocol (LDAP): Directory Information Models\"; } // recheck regexp it doesn''t handle posix [:cntrl:] typedef QOffsetRange { type int8; units \"dB\"; description \"TODO\"; reference \"TODO\"; } typedef QuotaType { type enumeration { enum STRICT { description \"TODO\"; } enum FLOAT { description \"TODO\"; } } description \"TODO\"; } typedef CyclicPrefix { type enumeration { enum NORMAL { description \"TODO\"; } enum EXTENDED { description \"TODO\"; } } description \"TODO\"; } grouping PLMNInfo { description \"The PLMNInfo data type define a S-NSSAI member in a specific PLMNId, and it have two attributes PLMNId and S-NSSAI (PLMNId, S-NSSAI). The PLMNId represents a data type that is comprised of mcc (mobile country code) and mnc (mobile network code), (See TS 23.003 subclause 2.2 and 12.1) and S-NSSAI represents an data type, that is comprised of an SST (Slice/Service type) and an optional SD (Slice Differentiator) field, (See TS 23.003 [13]).\"; uses PLMNId; list sNSSAIList { key \"sNssai\"; uses sNSSAIConfig; description \"List of sNSSAIs\"; } } grouping ManagedNFProfile { description \"Defines profile for managed NF\"; reference \"3GPP TS 23.501\"; leaf idx { type uint32; description \"TODO\"; reference \"3GPP TS 23.501\"; } leaf nfInstanceID { type yang:uuid; config false; mandatory false; description \"This parameter defines profile for managed NF. The format of the NF Instance ID shall be a Universally Unique Identifier (UUID) version 4, as described in IETF RFC 4122 \"; } leaf-list nfType { type NfType; config false; min-elements 1; description \"Type of the Network Function\"; } leaf hostAddr { type inet:host; mandatory false; description \"Host address of a NF\"; } leaf authzInfo { type string; description \"This parameter defines NF Specific Service authorization information. It shall include the NF type (s) and NF realms/origins allowed to consume NF Service(s) of NF Service Producer.\"; reference \"See TS 23.501\"; } leaf location { type string; description \"Information about the location of the NF instance (e.g. geographic location, data center) defined by operator\"; reference \"TS 29.510\"; } leaf capacity { type uint16; mandatory false; description \"This parameter defines static capacity information in the range of 0-65535, expressed as a weight relative to other NF instances of the same type; if capacity is also present in the nfServiceList parameters, those will have precedence over this value.\"; reference \"TS 29.510\"; } leaf nFSrvGroupId { type string; description \"This parameter defines identity of the group that is served by the NF instance. May be config false or true depending on the ManagedFunction. Config=true for Udrinfo. Config=false for UdmInfo and AusfInfo. Shall be present if ../nfType = UDM or AUSF or UDR. \"; reference \"TS 29.510\"; } leaf-list supportedDataSetIds { type enumeration { enum SUBSCRIPTION { description \"TODO\"; } enum POLICY { description \"TODO\"; } enum EXPOSURE { description \"TODO\"; } enum APPLICATION { description \"TODO\"; } } description \"List of supported data sets in the UDR instance. May be present if ../nfType = UDR\"; reference \"TS 29.510\"; } leaf-list smfServingAreas { type string; description \"Defines the SMF service area(s) the UPF can serve. Shall be present if ../nfType = UPF\"; reference \"TS 29.510\"; } leaf priority { type uint16; description \"This parameter defines Priority (relative to other NFs of the same type) in the range of 0-65535, to be used for NF selection; lower values indicate a higher priority. If priority is also present in the nfServiceList parameters, those will have precedence over this value. Shall be present if ../nfType = AMF \"; reference \"TS 29.510\"; } } grouping PLMNId { description \"TODO\"; reference \"TS 23.658\"; leaf mcc { type Mcc; mandatory true; description \"TODO\"; } leaf mnc { type Mnc; mandatory true; description \"TODO\"; } } grouping AmfIdentifier { description \"The AMFI is constructed from an AMF Region ID, an AMF Set ID and an AMF Pointer. The AMF Region ID identifies the region, the AMF Set ID uniquely identifies the AMF Set within the AMF Region, and the AMF Pointer uniquely identifies the AMF within the AMF Set. \"; leaf amfRegionId { type AmfRegionId; description \"TODO\"; } leaf amfSetId { type AmfSetId; description \"TODO\"; } leaf amfPointer { type AmfPointer; description \"TODO\"; } } grouping DefaultNotificationSubscription { description \"TODO\"; leaf notificationType { type NotificationType; description \"TODO\"; } leaf callbackUri { type inet:uri; description \"TODO\"; } leaf n1MessageClass { type N1MessageClass; description \"TODO\"; } leaf n2InformationClass { type N2InformationClass; description \"TODO\"; } } grouping Ipv4AddressRange { description \"TODO\"; leaf start { type inet:ipv4-address; description \"TODO\"; } leaf end { type inet:ipv4-address; description \"TODO\"; } } grouping Ipv6PrefixRange { description \"TODO\"; leaf start { type inet:ipv6-prefix; description \"TODO\"; } leaf end { type inet:ipv6-prefix; description \"TODO\"; } } grouping AddressWithVlan { description \"TODO\"; leaf ipAddress { type inet:ip-address; description \"TODO\"; } leaf vlanId { type uint16; description \"TODO\"; } } grouping ManagedElementGroup { description \"Abstract class representing telecommunications resources.\"; leaf dnPrefix { type DistinguishedName; description \"Provides naming context and splits the DN into a DN Prefix and Local DN\"; } leaf userLabel { type string; description \"A user-friendly name of this object.\"; } leaf locationName { type string; config false; description \"The physical location (e.g. an address) of an entity\"; } leaf-list managedBy { type DistinguishedName; config false; description \"Relates to the role played by ManagementSystem\"; } leaf-list managedElementTypeList { type string; config false; min-elements 1; description \"The type of functionality provided by the ManagedElement. It may represent one ME functionality or a combination of Two examples of allowed values are: - NodeB; - HLR, VLR.\"; } } // Managed Element grouping grouping NearRTRICGroup { description \"Abstract class representing Near RT RIC.\"; leaf dnPrefix { type DistinguishedName; description \"Provides naming context and splits the DN into a DN Prefix and Local DN\"; } leaf userLabel { type string; description \"A user-friendly name of this object.\"; } leaf locationName { type string; config false; description \"The physical location (e.g. an address) of an entity\"; } leaf gNBId { type int64 { range \"0..4294967295\"; } config false; description \"Identifies a gNB within a PLMN. The gNB Identifier (gNB ID) is part of the NR Cell Identifier (NCI) of the gNB cells.\"; reference \"gNB ID in 3GPP TS 38.300, Global gNB ID in 3GPP TS 38.413\"; } list pLMNInfoList { uses PLMNInfo; key \"mcc mnc\"; description \"The PLMNInfoList is a list of PLMNInfo data type. It defines which PLMNs that can be served by the nearRTRIC.\"; } list RRMPolicyRatio { key id; leaf id { type string; description \"Key leaf\"; } container attributes { uses RRMPolicyRatioGroup; } description \" The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC. For details see subclause 4.3.36.\"; } } // Near RT RIC grouping grouping Configuration{ leaf configParameter{ type string; description \"Type of the configuration parameter\"; } leaf configValue{ type int64; description \"Identifies the configuration to be done for the network elements under the NearRTRIC\"; } } grouping GNBDUFunctionGroup { description \"Represents the GNBDUFunction IOC.\"; reference \"3GPP TS 28.541\"; leaf gNBId { type int64 { range \"0..4294967295\"; } config false; mandatory false; description \"Identifies a gNB within a PLMN. The gNB Identifier (gNB ID) is part of the NR Cell Identifier (NCI) of the gNB cells.\"; reference \"gNB ID in 3GPP TS 38.300, Global gNB ID in 3GPP TS 38.413\"; } leaf gNBIdLength { type int32 { range \"22..32\"; } mandatory false; description \"Indicates the number of bits for encoding the gNB ID.\"; reference \"gNB ID in 3GPP TS 38.300, Global gNB ID in 3GPP TS 38.413\"; } leaf gNBDUId { type int64 { range \"0..68719476735\"; } mandatory false; description \"Uniquely identifies the DU at least within a gNB.\"; reference \"3GPP TS 38.473\"; } leaf gNBDUName { type string { length \"1..150\"; } description \"Identifies the Distributed Unit of an NR node\"; reference \"3GPP TS 38.473\"; } list RRMPolicyRatio { key id; leaf id { type string; description \"Key leaf\"; } container attributes { uses RRMPolicyRatioGroup; } description \" The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC. For details see subclause 4.3.36.\"; } } grouping NRCellDUGroup { description \"Represents the NRCellDU IOC.\"; reference \"3GPP TS 28.541\"; list RRMPolicyRatio { key id; leaf id { type string; description \"Key leaf\"; } container attributes { uses RRMPolicyRatioGroup; } description \" The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC. For details see subclause 4.3.36.\"; } leaf cellLocalId { type int32 { range \"0..16383\"; } mandatory false; description \"Identifies an NR cell of a gNB. Together with the corresponding gNB identifier in forms the NR Cell Identity (NCI).\"; reference \"NCI in 3GPP TS 38.300\"; } list pLMNInfoList { key \"mcc mnc\"; min-elements 1; description \"The PLMNInfoList is a list of PLMNInfo data type. It defines which PLMNs that can be served by the NR cell, and which S-NSSAIs that can be supported by the NR cell for corresponding PLMN in case of network slicing feature is supported. The plMNId of the first entry of the list is the PLMNId used to construct the nCGI for the NR cell.\"; uses PLMNInfo; } leaf nRPCI { type int32 { range \"0..1007\"; } mandatory false; description \"The Physical Cell Identity (PCI) of the NR cell.\"; reference \"3GPP TS 36.211\"; } leaf nRTAC { type Tac; description \"The common 5GS Tracking Area Code for the PLMNs.\"; reference \"3GPP TS 23.003, 3GPP TS 38.473\"; } } // grouping grouping rRMPolicyMemberGroup { description \"TODO\"; uses PLMNId; leaf sNSSAI { type SNssai; description \"This data type represents an RRM Policy member that will be part of a rRMPolicyMemberList. A RRMPolicyMember is defined by its pLMNId and sNSSAI (S-NSSAI). The members in a rRMPolicyMemberList are assigned a specific amount of RRM resources based on settings in RRMPolicy.\"; } } grouping RRMPolicyRatioGroup { uses RRMPolicy_Group; // Inherits RRMPolicy_ leaf quotaType { type QuotaType; mandatory false; description \"The type of the quota which allows to allocate resources as strictly usable for defined slice(s) (strict quota) or allows that resources to be used by other slice(s) when defined slice(s) do not need them (float quota).\"; } leaf rRMPolicyMaxRatio { type uint8; mandatory false; units percent; description \"The RRM policy setting the maximum percentage of radio resources to be allocated to the corresponding S-NSSAI list. This quota can be strict or float quota. Strict quota means resources are not allowed for other sNSSAIs even when they are not used by the defined sNSSAIList. Float quota resources can be used by other sNSSAIs when the defined sNSSAIList do not need them. Value 0 indicates that there is no maximum limit.\"; } leaf rRMPolicyMinRatio { type uint8; mandatory false; units percent; description \"The RRM policy setting the minimum percentage of radio resources to be allocated to the corresponding S-NSSAI list. This quota can be strict or float quota. Strict quota means resources are not allowed for other sNSSAIs even when they are not used by the defined sNSSAIList. Float quota resources can be used by other sNSSAIs when the defined sNSSAIList do not need them. Value 0 indicates that there is no minimum limit.\"; } leaf rRMPolicyDedicatedRatio { type uint8; units percent; description \"Dedicated Ration.\"; } description \"Represents the RRMPolicyRatio concrete IOC.\"; } grouping sNSSAIConfig{ leaf sNssai { type string; description \"s-NSSAI of a network slice.\"; reference \"3GPP TS 23.003\"; } leaf status { type string; description \"status of s-NSSAI\"; } list configData{ uses Configuration; key \"configParameter\"; description \"List of configurations to be done at the network elements\"; } } grouping RRMPolicy_Group { description \"This IOC represents the properties of an abstract RRMPolicy. The RRMPolicy_ IOC needs to be subclassed to be instantiated. It defines two attributes apart from those inherited from Top IOC, the resourceType attribute defines type of resource (PRB, RRC connected users, DRB usage etc.) and the rRMPolicyMemberList attribute defines the RRMPolicyMember(s)that are subject to this policy. An RRM resource (defined in resourceType attribute) is located in NRCellDU, NRCellCU, GNBDUFunction, GNBCUCPFunction or in GNBCUUPFunction. The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in TS 28.541 Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC.\"; leaf resourceType { type string; mandatory false; description \"The resourceType attribute defines type of resource (PRB, RRC connected users, DRB usage etc.) that is subject to policy. Valid values are ''PRB'', ''RRC'' or ''DRB''\"; } list rRMPolicyMemberList { key \"idx\"; leaf idx { type uint32; description \"TODO\"; } description \"It represents the list of RRMPolicyMember (s) that the managed object is supporting. A RRMPolicyMember <> include the PLMNId <> and S-NSSAI <>.\"; uses rRMPolicyMemberGroup; } } // grouping grouping GNBCUUPFunctionGroup { description \"Represents the GNBCUUPFunction IOC.\"; reference \"3GPP TS 28.541\"; list RRMPolicyRatio { key id; leaf id { type string; description \"Key leaf\"; } container attributes { uses RRMPolicyRatioGroup; } description \" The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC. For details see subclause 4.3.36.\"; } leaf gNBCUUPId { type uint64 { range \"0..68719476735\"; } config false; mandatory false; description \"Identifies the gNB-CU-UP at least within a gNB-CU-CP\"; reference \"''gNB-CU-UP ID'' in subclause 9.3.1.15 of 3GPP TS 38.463\"; } leaf gNBId { type int64 { range \"0..4294967295\"; } mandatory false; description \"Indicates the number of bits for encoding the gNB Id.\"; reference \"gNB Id in 3GPP TS 38.300, Global gNB ID in 3GPP TS 38.413\"; } list pLMNInfoList { key \"mcc mnc\"; description \"The PLMNInfoList is a list of PLMNInfo data type. It defines which PLMNs that can be served by the GNBCUUPFunction and which S-NSSAIs can be supported by the GNBCUUPFunction for corresponding PLMN in case of network slicing feature is supported\"; uses PLMNInfo; } } // grouping grouping GNBCUCPFunctionGroup { description \"Represents the GNBCUCPFunction IOC.\"; reference \"3GPP TS 28.541\"; list RRMPolicyRatio { key id; leaf id { type string; description \"Key leaf\"; } container attributes { uses RRMPolicyRatioGroup; } description \" The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC. For details see subclause 4.3.36.\"; } leaf gNBId { type int64 { range \"0..4294967295\"; } mandatory false; description \"Identifies a gNB within a PLMN. The gNB Identifier (gNB ID) is part of the NR Cell Identifier (NCI) of the gNB cells.\"; reference \"gNB ID in 3GPP TS 38.300, Global gNB ID in 3GPP TS 38.413\"; } leaf gNBIdLength { type int32 { range \"22..32\"; } mandatory false; description \"Indicates the number of bits for encoding the gNB ID.\"; reference \"gNB ID in 3GPP TS 38.300, Global gNB ID in 3GPP TS 38.413\"; } leaf gNBCUName { type string { length \"1..150\"; } mandatory false; description \"Identifies the Central Unit of an gNB.\"; reference \"3GPP TS 38.473\"; } list pLMNId { key \"mcc mnc\"; min-elements 1; max-elements 1; description \"The PLMN identifier to be used as part of the global RAN node identity.\"; uses PLMNId; } } // grouping grouping NRCellCUGroup { description \"Represents the NRCellCU IOC.\"; reference \"3GPP TS 28.541\"; leaf cellLocalId { type int32 { range \"0..16383\"; } mandatory false; description \"Identifies an NR cell of a gNB. Together with corresponding gNB ID it forms the NR Cell Identifier (NCI).\"; } list pLMNInfoList { key \"mcc mnc\"; min-elements 1; description \"The PLMNInfoList is a list of PLMNInfo data type. It defines which PLMNs that can be served by the NR cell, and which S-NSSAIs that can be supported by the NR cell for corresponding PLMN in case of network slicing feature is supported.\"; uses PLMNInfo; // Note: Whether the attribute pLMNId in the pLMNInfo can be writable depends on the implementation. } list RRMPolicyRatio { key id; leaf id { type string; description \"Key leaf\"; } container attributes { uses RRMPolicyRatioGroup; } description \" The RRMPolicyRatio IOC is one realization of a RRMPolicy_ IOC, see the inheritance in Figure 4.2.1.2-1. This RRM framework allows adding new policies, both standardized (like RRMPolicyRatio) or as vendor specific, by inheriting from the abstract RRMPolicy_ IOC. For details see subclause 4.3.36.\"; } } // grouping NRCellCUGroup grouping NRCellRelationGroup { description \"Represents the NRCellRelation IOC.\"; reference \"3GPP TS 28.541\"; leaf nRTCI { type uint64; description \"Target NR Cell Identifier. It consists of NR Cell Identifier (NCI) and Physical Cell Identifier of the target NR cell (nRPCI).\"; "|436fef591eba7f38d1a0c5e3cbd3c122f01ab41dfab37cc5a9cbca1ed53b29fb ietf-yang-types.yang|"module ietf-yang-types { namespace \"urn:ietf:params:xml:ns:yang:ietf-yang-types\"; prefix \"yang\"; organization \"IETF NETMOD (NETCONF Data Modeling Language) Working Group\"; contact \"WG Web: WG List: WG Chair: David Kessens WG Chair: Juergen Schoenwaelder Editor: Juergen Schoenwaelder \"; description \"This module contains a collection of generally useful derived YANG data types. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust''s Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 6991; see the RFC itself for full legal notices.\"; revision 2013-07-15 { description \"This revision adds the following new data types: - yang-identifier - hex-string - uuid - dotted-quad\"; reference \"RFC 6991: Common YANG Data Types\"; } revision 2010-09-24 { description \"Initial revision.\"; reference \"RFC 6021: Common YANG Data Types\"; } /*** collection of counter and gauge types ***/ typedef counter32 { type uint32; description \"The counter32 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Counters have no defined ''initial'' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of a schema node using this type. If such other times can occur, for example, the creation of a schema node of type counter32 at times other than re-initialization, then a corresponding schema node should be defined, with an appropriate type, to indicate the last discontinuity. The counter32 type should not be used for configuration schema nodes. A default statement SHOULD NOT be used in combination with the type counter32. In the value set and its semantics, this type is equivalent to the Counter32 type of the SMIv2.\"; reference \"RFC 2578: Structure of Management Information Version 2 (SMIv2)\"; } typedef zero-based-counter32 { type yang:counter32; default \"0\"; description \"The zero-based-counter32 type represents a counter32 that has the defined ''initial'' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Provided that an application discovers a new schema node of this type within the minimum time to wrap, it can use the ''initial'' value as a delta. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. In the value set and its semantics, this type is equivalent to the ZeroBasedCounter32 textual convention of the SMIv2.\"; reference \"RFC 4502: Remote Network Monitoring Management Information Base Version 2\"; } typedef counter64 { type uint64; description \"The counter64 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Counters have no defined ''initial'' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of a schema node using this type. If such other times can occur, for example, the creation of a schema node of type counter64 at times other than re-initialization, then a corresponding schema node should be defined, with an appropriate type, to indicate the last discontinuity. The counter64 type should not be used for configuration schema nodes. A default statement SHOULD NOT be used in combination with the type counter64. In the value set and its semantics, this type is equivalent to the Counter64 type of the SMIv2.\"; reference \"RFC 2578: Structure of Management Information Version 2 (SMIv2)\"; } typedef zero-based-counter64 { type yang:counter64; default \"0\"; description \"The zero-based-counter64 type represents a counter64 that has the defined ''initial'' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Provided that an application discovers a new schema node of this type within the minimum time to wrap, it can use the ''initial'' value as a delta. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. In the value set and its semantics, this type is equivalent to the ZeroBasedCounter64 textual convention of the SMIv2.\"; reference \"RFC 2856: Textual Conventions for Additional High Capacity Data Types\"; } typedef gauge32 { type uint32; description \"The gauge32 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^32-1 (4294967295 decimal), and the minimum value cannot be smaller than 0. The value of a gauge32 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge32 also decreases (increases). In the value set and its semantics, this type is equivalent to the Gauge32 type of the SMIv2.\"; reference \"RFC 2578: Structure of Management Information Version 2 (SMIv2)\"; } typedef gauge64 { type uint64; description \"The gauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^64-1 (18446744073709551615), and the minimum value cannot be smaller than 0. The value of a gauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge64 also decreases (increases). In the value set and its semantics, this type is equivalent to the CounterBasedGauge64 SMIv2 textual convention defined in RFC 2856\"; reference \"RFC 2856: Textual Conventions for Additional High Capacity Data Types\"; } /*** collection of identifier-related types ***/ typedef object-identifier { type string { pattern ''(([0-1](.[1-3]?[0-9]))|(2.(0|([1-9]d*))))'' + ''(.(0|([1-9]d*)))*''; } description \"The object-identifier type represents administratively assigned names in a registration-hierarchical-name tree. Values of this type are denoted as a sequence of numerical non-negative sub-identifier values. Each sub-identifier value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers are separated by single dots and without any intermediate whitespace. The ASN.1 standard restricts the value space of the first sub-identifier to 0, 1, or 2. Furthermore, the value space of the second sub-identifier is restricted to the range 0 to 39 if the first sub-identifier is 0 or 1. Finally, the ASN.1 standard requires that an object identifier has always at least two sub-identifiers. The pattern captures these restrictions. Although the number of sub-identifiers is not limited, module designers should realize that there may be implementations that stick with the SMIv2 limit of 128 sub-identifiers. This type is a superset of the SMIv2 OBJECT IDENTIFIER type since it is not restricted to 128 sub-identifiers. Hence, this type SHOULD NOT be used to represent the SMIv2 OBJECT IDENTIFIER type; the object-identifier-128 type SHOULD be used instead.\"; reference \"ISO9834-1: Information technology -- Open Systems Interconnection -- Procedures for the operation of OSI Registration Authorities: General procedures and top arcs of the ASN.1 Object Identifier tree\"; } typedef object-identifier-128 { type object-identifier { pattern ''d*(.d*){1,127}''; } description \"This type represents object-identifiers restricted to 128 sub-identifiers. In the value set and its semantics, this type is equivalent to the OBJECT IDENTIFIER type of the SMIv2.\"; reference \"RFC 2578: Structure of Management Information Version 2 (SMIv2)\"; } typedef yang-identifier { type string { length \"1..max\"; pattern ''[a-zA-Z_][a-zA-Z0-9-_.]*''; pattern ''.|..|[^xX].*|.[^mM].*|..[^lL].*''; } description \"A YANG identifier string as defined by the ''identifier'' rule in Section 12 of RFC 6020. An identifier must start with an alphabetic character or an underscore followed by an arbitrary sequence of alphabetic or numeric characters, underscores, hyphens, or dots. A YANG identifier MUST NOT start with any possible combination of the lowercase or uppercase character sequence ''xml''.\"; reference \"RFC 6020: YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)\"; } /*** collection of types related to date and time***/ typedef date-and-time { type string { pattern ''d{4}-d{2}-d{2}Td{2}:d{2}:d{2}(.d+)?'' + ''(Z|[+-]d{2}:d{2})''; } description \"The date-and-time type is a profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar. The profile is defined by the date-time production in Section 5.6 of RFC 3339. The date-and-time type is compatible with the dateTime XML schema type with the following notable exceptions: (a) The date-and-time type does not allow negative years. (b) The date-and-time time-offset -00:00 indicates an unknown time zone (see RFC 3339) while -00:00 and +00:00 and Z all represent the same time zone in dateTime. (c) The canonical format (see below) of data-and-time values differs from the canonical format used by the dateTime XML schema type, which requires all times to be in UTC using the time-offset ''Z''. This type is not equivalent to the DateAndTime textual convention of the SMIv2 since RFC 3339 uses a different separator between full-date and full-time and provides higher resolution of time-secfrac. The canonical format for date-and-time values with a known time zone uses a numeric time zone offset that is calculated using the device''s configured known offset to UTC time. A change of the device''s offset to UTC time will cause date-and-time values to change accordingly. Such changes might happen periodically in case a server follows automatically daylight saving time (DST) time zone offset changes. The canonical format for date-and-time values with an unknown time zone (usually referring to the notion of local time) uses the time-offset -00:00.\"; reference \"RFC 3339: Date and Time on the Internet: Timestamps RFC 2579: Textual Conventions for SMIv2 XSD-TYPES: XML Schema Part 2: Datatypes Second Edition\"; } typedef timeticks { type uint32; description \"The timeticks type represents a non-negative integer that represents the time, modulo 2^32 (4294967296 decimal), in hundredths of a second between two epochs. When a schema node is defined that uses this type, the description of the schema node identifies both of the reference epochs. In the value set and its semantics, this type is equivalent to the TimeTicks type of the SMIv2.\"; reference \"RFC 2578: Structure of Management Information Version 2 (SMIv2)\"; } typedef timestamp { type yang:timeticks; description \"The timestamp type represents the value of an associated timeticks schema node at which a specific occurrence happened. The specific occurrence must be defined in the description of any schema node defined using this type. When the specific occurrence occurred prior to the last time the associated timeticks attribute was zero, then the timestamp value is zero. Note that this requires all timestamp values to be reset to zero when the value of the associated timeticks attribute reaches 497+ days and wraps around to zero. The associated timeticks schema node must be specified in the description of any schema node using this type. In the value set and its semantics, this type is equivalent to the TimeStamp textual convention of the SMIv2.\"; reference \"RFC 2579: Textual Conventions for SMIv2\"; } /*** collection of generic address types ***/ typedef phys-address { type string { pattern ''([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?''; } description \"Represents media- or physical-level addresses represented as a sequence octets, each octet represented by two hexadecimal numbers. Octets are separated by colons. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the PhysAddress textual convention of the SMIv2.\"; reference \"RFC 2579: Textual Conventions for SMIv2\"; } typedef mac-address { type string { pattern ''[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}''; } description \"The mac-address type represents an IEEE 802 MAC address. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the MacAddress textual convention of the SMIv2.\"; reference \"IEEE 802: IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture RFC 2579: Textual Conventions for SMIv2\"; } /*** collection of XML-specific types ***/ typedef xpath1.0 { type string; description \"This type represents an XPATH 1.0 expression. When a schema node is defined that uses this type, the description of the schema node MUST specify the XPath context in which the XPath expression is evaluated.\"; reference \"XPATH: XML Path Language (XPath) Version 1.0\"; } /*** collection of string types ***/ typedef hex-string { type string { pattern ''([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?''; } description \"A hexadecimal string with octets represented as hex digits separated by colons. The canonical representation uses lowercase characters.\"; } typedef uuid { type string { pattern ''[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-'' + ''[0-9a-fA-F]{4}-[0-9a-fA-F]{12}''; } description \"A Universally Unique IDentifier in the string representation defined in RFC 4122. The canonical representation uses lowercase characters. The following is an example of a UUID in string representation: f81d4fae-7dec-11d0-a765-00a0c91e6bf6 \"; reference \"RFC 4122: A Universally Unique IDentifier (UUID) URN Namespace\"; } typedef dotted-quad { type string { pattern ''(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5]).){3}'' + ''([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])''; } description \"An unsigned 32-bit number expressed in the dotted-quad notation, i.e., four octets written as decimal numbers and separated with the ''.'' (full stop) character.\"; } }"|25516798613f862ad20831e59ba02b75ecdc9c6f5547ed5d90bda76143bf0112