3 REPO_URL_BLOB=$(cat /opt/config/repo_url_blob.txt)
4 REPO_URL_ARTIFACTS=$(cat /opt/config/repo_url_artifacts.txt)
5 DEMO_ARTIFACTS_VERSION=$(cat /opt/config/demo_artifacts_version.txt)
6 INSTALL_SCRIPT_VERSION=$(cat /opt/config/install_script_version.txt)
7 VPP_SOURCE_REPO_URL=$(cat /opt/config/vpp_source_repo_url.txt)
8 VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/vpp_source_repo_branch.txt)
9 HC2VPP_SOURCE_REPO_URL=$(cat /opt/config/hc2vpp_source_repo_url.txt)
10 HC2VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/hc2vpp_source_repo_branch.txt)
11 CLOUD_ENV=$(cat /opt/config/cloud_env.txt)
12 MUX_GW_IP=$(cat /opt/config/mux_gw_private_net_ipaddr.txt)
13 MUX_GW_CIDR=$(cat /opt/config/mux_gw_private_net_cidr.txt)
16 # 'build' - just build the code
17 # 'done' - code is build, install and setup
18 # 'auto' - bulid, install and setup
20 if [[ -f /opt/config/compile_state.txt ]]
22 BUILD_STATE=$(cat /opt/config/compile_state.txt)
25 # Convert Network CIDR to Netmask
27 # Number of args to shift, 255..255, first non-255 byte, zeroes
28 set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
29 [ $1 -gt 1 ] && shift $1 || shift
30 echo ${1-0}.${2-0}.${3-0}.${4-0}
33 # OpenStack network configuration
34 if [[ $BUILD_STATE != "build" ]]
36 if [[ $CLOUD_ENV == "openstack" ]]
38 echo 127.0.0.1 $(hostname) >> /etc/hosts
40 # Allow remote login as root
41 mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk
42 cp /home/ubuntu/.ssh/authorized_keys /root/.ssh
44 MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
46 IP=$(cat /opt/config/oam_ipaddr.txt)
47 BITS=$(cat /opt/config/oam_cidr.txt | cut -d"/" -f2)
48 NETMASK=$(cdr2mask $BITS)
49 echo "auto eth2" >> /etc/network/interfaces
50 echo "iface eth2 inet static" >> /etc/network/interfaces
51 echo " address $IP" >> /etc/network/interfaces
52 echo " netmask $NETMASK" >> /etc/network/interfaces
53 echo " mtu $MTU" >> /etc/network/interfaces
57 fi # endif BUILD_STATE != "build"
59 if [[ $BUILD_STATE != "done" ]]
61 # Download required dependencies
62 echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
63 echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list
64 apt-get --allow-unauthenticated update
65 apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev
68 # Install the tools required for download codes
69 apt-get --allow-unauthenticated install -y expect git make linux-image-extra-`uname -r`
71 #Download and build the VPP codes
73 git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp
80 make V=0 PLATFORM=vpp TAG=vpp install-deb
82 # Install the VPP package
85 fi # endif BUILD_STATE != "done"
87 if [[ $BUILD_STATE != "build" ]]
89 # Auto-start configuration for the VPP
90 cat > /etc/vpp/startup.conf << EOF
96 cli-listen localhost:5002
97 startup-config /etc/vpp/setup.gate
109 ## In the VPP there is one main thread and optionally the user can create worker(s)
110 ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
112 ## Manual pinning of thread(s) to CPU core(s)
114 ## Set logical CPU core where main thread runs
117 ## Set logical CPU core(s) where worker threads are running
118 # corelist-workers 2-3,18-19
120 ## Automatic pinning of thread(s) to CPU core(s)
122 ## Sets number of CPU core(s) to be skipped (1 ... N-1)
123 ## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
124 ## The main thread is automatically pinned to the first available CPU core and worker(s)
125 ## are pinned to next free CPU core(s) after core assigned to main thread
128 ## Specify a number of workers to be created
129 ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
130 ## and main thread's CPU core
133 ## Set scheduling policy and priority of main and worker threads
135 ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
136 ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
137 # scheduler-policy fifo
139 ## Scheduling priority is used only for "real-time policies (fifo and rr),
140 ## and has to be in the range of priorities supported for a particular policy
141 # scheduler-priority 50
145 ## Change default settings for all intefaces
147 ## Number of receive queues, enables RSS
151 ## Number of transmit queues, Default is equal
152 ## to number of worker threads or 1 if no workers treads
155 ## Number of descriptors in transmit and receive rings
156 ## increasing or reducing number can impact performance
157 ## Default is 1024 for both rx and tx
161 ## VLAN strip offload mode for interface
163 # vlan-strip-offload on
166 ## Whitelist specific interface by specifying PCI address
169 ## Whitelist specific interface by specifying PCI address and in
170 ## addition specify custom parameters for this interface
175 ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci
176 ## and uio_pci_generic (default)
177 # uio-driver vfio-pci
179 ## Disable mutli-segment buffers, improves performance but
180 ## disables Jumbo MTU support
183 ## Increase number of buffers allocated, needed only in scenarios with
184 ## large number of interfaces and worker threads. Value is per CPU socket.
188 ## Change hugepages allocation per-socket, needed only if there is need for
189 ## larger number of mbufs. Default is 256M on each detected CPU socket
190 # socket-mem 2048,2048
195 # Get list of network device PCI bus addresses
197 while read -r line ; do
198 if [ "$line" != "${line#*network device}" ]; then
199 echo -n "${line%% *} "
204 NICS=$(get_nic_pci_list)
205 NICS=`echo ${NICS} | sed 's/[0]\+\([0-9]\)/\1/g' | sed 's/[.:]/\//g'`
207 MUX_GW_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 2` # second interface in list
208 GW_PUB_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 4` # fourth interface in list
210 touch /etc/vpp/setup.gate
211 cat > /etc/vpp/setup.gate << EOF
212 set int state ${MUX_GW_NIC} up
213 set int ip address ${MUX_GW_NIC} 10.5.0.21/24
215 set int state ${GW_PUB_NIC} up
216 set dhcp client intfc ${GW_PUB_NIC} hostname vg-1
218 tap connect lstack address 192.168.1.1/24
219 set int state tap-0 up
221 create vxlan tunnel src 10.5.0.21 dst 10.5.0.20 vni 100
223 set interface l2 bridge tap-0 10 0
224 set interface l2 bridge vxlan_tunnel0 10 1
225 set bridge-domain arp term 10
228 set int l2 bridge loop0 10 bvi 2
229 set int ip address loop0 192.168.1.254/24
230 set int state loop0 up
231 set int snat in loop0 out ${GW_PUB_NIC}
232 snat add int address ${GW_PUB_NIC}
236 fi # endif BUILD_STATE != "build"
238 if [[ $BUILD_STATE != "done" ]]
241 # Download and install HC2VPP from
\ 2 source
243 git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp
245 apt --allow-unauthenticated install -y python-ply-lex-3.5 python-ply-yacc-3.5 python-pycparser python-cffi
246 apt-get install -y maven
248 cat > ~/.m2/settings.xml << EOF
249 <?xml version="1.0" encoding="UTF-8"?>
250 <!-- vi: set et smarttab sw=2 tabstop=2: -->
251 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
252 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
253 xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
257 <id>fd.io-release</id>
260 <id>fd.io-mirror</id>
261 <name>fd.io-mirror</name>
262 <url>https://nexus.fd.io/content/groups/public/</url>
264 <enabled>true</enabled>
265 <updatePolicy>never</updatePolicy>
268 <enabled>false</enabled>
274 <id>fd.io-mirror</id>
275 <name>fd.io-mirror</name>
276 <url>https://nexus.fd.io/content/repositories/public/</url>
278 <enabled>true</enabled>
279 <updatePolicy>never</updatePolicy>
282 <enabled>false</enabled>
285 </pluginRepositories>
289 <id>fd.io-snapshots</id>
292 <id>fd.io-snapshot</id>
293 <name>fd.io-snapshot</name>
294 <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
296 <enabled>false</enabled>
299 <enabled>true</enabled>
305 <id>fd.io-snapshot</id>
306 <name>fd.io-snapshot</name>
307 <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
309 <enabled>false</enabled>
312 <enabled>true</enabled>
315 </pluginRepositories>
318 <id>opendaylight-snapshots</id>
321 <id>opendaylight-snapshot</id>
322 <name>opendaylight-snapshot</name>
323 <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
325 <enabled>false</enabled>
328 <enabled>true</enabled>
334 <id>opendaylight-shapshot</id>
335 <name>opendaylight-snapshot</name>
336 <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
338 <enabled>false</enabled>
341 <enabled>true</enabled>
344 </pluginRepositories>
349 <activeProfile>fd.io-release</activeProfile>
350 <activeProfile>fd.io-snapshots</activeProfile>
351 <activeProfile>opendaylight-snapshots</activeProfile>
358 l_version=$(cat pom.xml | grep "<version>" | head -1)
359 l_version=$(echo "${l_version%<*}")
360 l_version=$(echo "${l_version#*>}")
361 mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb
362 sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json
364 fi # endif BUILD_STATE != "done
366 if [[ $BUILD_STATE != "build" ]]
368 # Create systemctl service for Honeycomb
369 cat > /etc/systemd/system/honeycomb.service << EOF
371 Description=Honeycomb Agent for the VPP control plane
372 Documentation=https://wiki.fd.io/view/Honeycomb
377 ExecStart=/opt/honeycomb/honeycomb
382 WantedBy=multi-user.target
384 systemctl enable /etc/systemd/system/honeycomb.service
386 # Install the DHCP server and config
387 apt-get install -y isc-dhcp-server
388 cat >> /etc/dhcp/dhcpd.conf << EOF
389 subnet 192.168.1.0 netmask 255.255.255.0 {
390 range 192.168.1.2 192.168.1.253;
391 option subnet-mask 255.255.255.0;
392 option routers 192.168.1.254;
393 option broadcast-address 192.168.1.255;
394 default-lease-time 600;
399 # Download DHCP config files
401 wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gw_init.sh
402 wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gw.sh
403 chmod +x v_gw_init.sh
405 mv v_gw.sh /etc/init.d
406 sed "s/Provides:/$/ v_gw" /etc/init.d/v_gw.sh
407 update-rc.d v_gw.sh defaults
409 # Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
410 if [[ $CLOUD_ENV != "rackspace" ]]
412 sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub
413 grub-mkconfig -o /boot/grub/grub.cfg
414 sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg
415 sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules
416 echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
417 echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic
422 fi # endif BUILD_STATE != "build"