2 # ============LICENSE_START=======================================================
\r
4 # ================================================================================
\r
5 # Copyright (C) 2017-2018 AT&T Intellectual Property. All rights
\r
7 # ================================================================================
\r
8 # Licensed under the Apache License, Version 2.0 (the "License");
\r
9 # you may not use this file except in compliance with the License.
\r
10 # You may obtain a copy of the License at
\r
12 # http://www.apache.org/licenses/LICENSE-2.0
\r
14 # Unless required by applicable law or agreed to in writing, software
\r
15 # distributed under the License is distributed on an "AS IS" BASIS,
\r
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
\r
17 # See the License for the specific language governing permissions and
\r
18 # limitations under the License.
\r
19 # ============LICENSE_END============================================
\r
20 # ===================================================================
\r
24 info.build.artifact=@project.artifactId@
\r
25 info.build.name=@project.name@
\r
26 info.build.description=@project.description@
\r
27 info.build.version=@project.version@
\r
29 ### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
\r
30 ### (See below for the parameter 'server.http.port' if you want to have both enabled)
\r
31 ### To have only HTTP, keep the lines server.ssl.* commented
\r
32 ### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
\r
33 server.port=${clamp.it.tests.http}
\r
34 ### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
\r
35 #server.ssl.key-store=file:/tmp/mykey.jks
\r
36 #server.ssl.key-store-password=pass
\r
37 #server.ssl.key-password=pass
\r
39 ### In order to be user friendly when HTTPS is enabled,
\r
40 ### you can add another HTTP port that will be automatically redirected to HTTPS
\r
41 ### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
\r
42 #server.http-to-https-redirection.port=8090
\r
46 ### server.port=8080
\r
50 ### server.port=8443
\r
51 ### server.ssl.key-store=file:/tmp/mykey.jks
\r
52 ### server.ssl.key-store-password=mypass
\r
53 ### server.ssl.key-password=mypass
\r
55 ### HTTP (Redirected to HTTPS) and HTTPS Example:
\r
56 ### --------------------------------------------
\r
57 ### server.port=8443 <-- The HTTPS port
\r
58 ### server.ssl.key-store=file:/tmp/mykey.jks
\r
59 ### server.ssl.key-store-password=mypass
\r
60 ### server.ssl.key-password=mypass
\r
61 ### server.http-to-https-redirection.port=8090 <-- The HTTP port
\r
63 server.servlet.context-path=/
\r
64 #Modified engine-rest applicationpath
\r
65 spring.profiles.active=clamp-default,clamp-default-user
\r
66 spring.http.converters.preferred-json-mapper=gson
\r
68 #The max number of active threads in this pool
\r
69 server.tomcat.max-threads=200
\r
70 #The minimum number of threads always kept alive
\r
71 server.tomcat.min-Spare-Threads=25
\r
72 #The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
\r
73 server.tomcat.max-idle-time=60000
\r
75 #Servlet context parameters
\r
76 server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
\r
78 camel.springboot.consumer-template-cache-size=1000
\r
79 camel.springboot.producer-template-cache-size=1000
\r
80 # JMX enabled to have Camel Swagger runtime working
\r
81 camel.springboot.jmx-enabled=true
\r
82 camel.defaultthreadpool.poolsize=10
\r
83 camel.defaultthreadpool.maxpoolsize=20
\r
84 camel.defaultthreadpool.maxqueuesize=1000
\r
85 camel.defaultthreadpool.keepaliveTime=60
\r
86 camel.defaultthreadpool.rejectpolicy=CallerRuns
\r
87 #camel.springboot.xmlRoutes = false
\r
88 camel.springboot.xmlRoutes=classpath:/clds/camel/routes/*.xml
\r
89 camel.springboot.xmlRests=classpath:/clds/camel/rest/*.xml
\r
90 #camel.springboot.typeConversion = false
\r
92 #clds datasource connection details
\r
93 spring.datasource.cldsdb.driverClassName=org.mariadb.jdbc.Driver
\r
94 spring.datasource.cldsdb.url=jdbc:mariadb:sequential://localhost:3306,localhost:${docker.mariadb.port.host}/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
\r
95 spring.datasource.cldsdb.username=clds
\r
96 spring.datasource.cldsdb.password=4c90a0b48204383f4283448d23e0b885a47237b2a23588e7c4651604f51c1067
\r
97 spring.datasource.cldsdb.validationQuery=SELECT 1
\r
98 spring.datasource.cldsdb.validationQueryTimeout=20000
\r
99 spring.datasource.cldsdb.validationInterval=30000
\r
100 spring.datasource.cldsdb.testWhileIdle = true
\r
101 spring.datasource.cldsdb.minIdle = 0
\r
102 spring.datasource.cldsdb.initialSize=0
\r
103 # Automatically test whether a connection provided is good or not
\r
104 spring.datasource.cldsdb.testOnBorrow=true
\r
105 spring.datasource.cldsdb.ignoreExceptionOnPreLoad=true
\r
107 spring.jpa.properties.javax.persistence.schema-generation.database.action=drop-and-create
108 #spring.jpa.properties.javax.persistence.schema-generation.create-source=metadata
109 #spring.jpa.properties.javax.persistence.schema-generation.scripts.action=create
110 #spring.jpa.properties.javax.persistence.schema-generation.scripts.create-target=create.sql
111 # disable Hibernate DDL generation because the schema will be generated from a sql script
112 spring.jpa.properties.hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect
113 spring.jpa.properties.hibernate.ddl-auto=validate
114 spring.jpa.properties.hibernate.hbm2ddl.delimiter=;
115 spring.jpa.properties.hibernate.format_sql=true
116 spring.jpa.properties.hibernate.use-new-id-generator-mappings=true
118 # Whether to enable logging of SQL statements.
119 spring.jpa.show-sql=true
121 #Async Executor default Parameters
\r
122 async.core.pool.size=10
\r
123 async.max.pool.size=20
\r
124 async.queue.capacity=500
\r
126 #For EELF logback file
\r
127 #com.att.eelf.logging.path=
\r
128 clamp.config.logback.filename=logback-default.xml
\r
129 #The log folder that will be used in logback.xml file
\r
130 clamp.config.log.path=log
\r
131 clamp.config.files.systemProperties=classpath:/system.properties
\r
132 clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
\r
133 clamp.config.files.globalProperties=classpath:/clds/templates/globalProperties.json
\r
134 clamp.config.files.sdcController=classpath:/clds/sdc-controllers-config.json
\r
136 # Properties for Clamp
\r
137 # DCAE request build properties
\r
139 clamp.config.dcae.template=classpath:/clds/templates/dcae-template.json
\r
140 clamp.config.dcae.deployment.template=classpath:/clds/templates/dcae-deployment-template.json
\r
143 # Configuration Settings for Policy Engine Components
\r
144 clamp.config.policy.url=http://localhost:${docker.http-cache.port.host}
\r
145 clamp.config.policy.userName=test
\r
146 clamp.config.policy.password=test
\r
147 clamp.config.policy.pdpUrl1=http://localhost:${docker.http-cache.port.host}/pdp/ , testpdp, alpha123
\r
148 clamp.config.policy.pdpUrl2=http://localhost:${docker.http-cache.port.host}/pdp/ , testpdp, alpha123
\r
149 clamp.config.policy.papUrl=http://localhost:${docker.http-cache.port.host}/pap/ , testpap, alpha123
\r
150 clamp.config.policy.notificationType=websocket
\r
151 clamp.config.policy.notificationUebServers=localhost
\r
152 clamp.config.policy.notificationTopic=
\r
153 clamp.config.policy.clientId=python
\r
155 clamp.config.policy.clientKey=dGVzdA==
\r
156 #DEVL for development
\r
157 #TEST for Test environments
\r
158 #PROD for prod environments
\r
159 clamp.config.policy.policyEnvironment=DEVL
\r
160 # General Policy request properties
\r
162 clamp.config.policy.onap.name=DCAE
\r
163 clamp.config.policy.pdp.group=default
\r
164 clamp.config.policy.ms.type=MicroService
\r
165 clamp.config.policy.ms.policyNamePrefix=Config_MS_
\r
166 clamp.config.policy.op.policyNamePrefix=Config_BRMS_Param_
\r
167 clamp.config.policy.base.policyNamePrefix=Config_
\r
168 clamp.config.policy.op.type=BRMS_Param
\r
170 clamp.config.import.tosca.model=false
\r
171 clamp.config.tosca.policyTypes=tca
\r
172 clamp.config.tosca.filePath=/tmp/tosca-models
\r
174 # TCA MicroService Policy request build properties
\r
176 clamp.config.tca.policyid.prefix=DCAE.Config_
\r
177 clamp.config.tca.policy.template=classpath:/clds/templates/tca-policy-template.json
\r
178 clamp.config.tca.template=classpath:/clds/templates/tca-template.json
\r
179 clamp.config.tca.thresholds.template=classpath:/clds/templates/tca-thresholds-template.json
\r
183 # Operational Policy request build properties
\r
185 clamp.config.op.policyDescription=from clds
\r
187 clamp.config.op.templateName=ClosedLoopControlName
\r
188 clamp.config.op.operationTopic=APPC-CL
\r
189 clamp.config.op.notificationTopic=POLICY-CL-MGT
\r
190 clamp.config.op.controller=amsterdam
\r
191 clamp.config.op.policy.appc=APPC
\r
193 # Sdc service properties
\r
195 clamp.config.sdc.csarFolder = ${project.build.directory}/sdc-tests
\r
196 clamp.config.sdc.blueprint.parser.mapping = classpath:/clds/blueprint-parser-mapping.json
\r
198 clamp.config.ui.location.default=classpath:/clds/templates/ui-location-default.json
\r
200 # if action.test.override is true, then any action will be marked as test=true (even if incoming action request had test=false); otherwise, test flag will be unchanged on the action request
\r
201 clamp.config.action.test.override=false
\r
202 # if action.insert.test.event is true, then insert event even if the action is set to test
\r
203 clamp.config.action.insert.test.event=false
\r
204 clamp.config.clds.service.cache.invalidate.after.seconds=120
\r
206 #DCAE Inventory Url Properties
\r
207 clamp.config.dcae.inventory.url=http://localhost:${docker.http-cache.port.host}
\r
208 clamp.config.dcae.intentory.retry.interval=100
\r
209 clamp.config.dcae.intentory.retry.limit=1
\r
211 #DCAE Dispatcher Url Properties
\r
212 clamp.config.dcae.dispatcher.url=http://localhost:${docker.http-cache.port.host}
\r
213 clamp.config.dcae.dispatcher.retry.interval=100
\r
214 clamp.config.dcae.dispatcher.retry.limit=1
\r
216 #Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
\r
217 clamp.config.security.permission.type.cl=permission-type-cl
\r
218 clamp.config.security.permission.type.cl.manage=permission-type-cl-manage
\r
219 clamp.config.security.permission.type.cl.event=permission-type-cl-event
\r
220 clamp.config.security.permission.type.filter.vf=permission-type-filter-vf
\r
221 clamp.config.security.permission.type.template=permission-type-template
\r
222 clamp.config.security.permission.type.tosca=permission-type-tosca
\r
223 #This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
\r
224 clamp.config.security.permission.instance=dev
\r
225 clamp.config.security.authentication.class=org.onap.aaf.cadi.principal.X509Principal