mvn-phase-lib.sh

   1 #!/bin/bash
   2
   3 # ================================================================================
   4 # Copyright (c) 2017-2019 AT&T Intellectual Property. All rights reserved.
   5 # ================================================================================
   6 # Licensed under the Apache License, Version 2.0 (the "License");
   7 # you may not use this file except in compliance with the License.
   8 # You may obtain a copy of the License at
   9 #
  10 #     http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 # Unless required by applicable law or agreed to in writing, software
  13 # distributed under the License is distributed on an "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 # See the License for the specific language governing permissions and
  16 # limitations under the License.
  17 # ============LICENSE_END=========================================================
  18
  19
  20 #MVN_PROJECT_MODULEID="$1"
  21 #MVN_PHASE="$2"
  22 #PROJECT_ROOT=$(dirname $0)
  23
  24 FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
  25 if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
  26   MVN_PROJECT_MODULEID=""
  27 fi
  28
  29 if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
  30   echo "=> for SNAPSHOT artifact build"
  31   MVN_DEPLOYMENT_TYPE='SNAPSHOT'
  32 else
  33   echo "=> for STAGING/RELEASE artifact build"
  34   MVN_DEPLOYMENT_TYPE='STAGING'
  35 fi
  36 echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
  37
  38
  39 TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
  40
  41 # expected environment variables
  42 if [ -z "${MVN_NEXUSPROXY}" ]; then
  43     echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
  44     exit
  45 fi
  46 MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
  47 echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
  48
  49 if [ -z "$WORKSPACE" ]; then
  50     WORKSPACE=$(pwd)
  51 fi
  52
  53 export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
  54
  55 RELEASE_TAG=${MVN_RELEASE_TAG:-R7}
  56 if [ "$RELEASE_TAG" == "R1" ]; then
  57   unset RELEASE_TAG
  58 fi
  59
  60
  61 # mvn phase in life cycle
  62 MVN_PHASE="$2"
  63
  64 echo "MVN_RELEASE_TAG is                 [$MVN_RELEASE_TAG]"
  65 echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
  66 echo "MVN_PHASE is                       [$MVN_PHASE]"
  67 echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
  68 echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
  69 echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
  70 echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
  71 echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
  72 echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
  73 MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
  74 echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
  75 echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
  76 echo "MVN_DOCKERREGISTRY_SNAPSHOT is     [$MVN_DOCKERREGISTRY_SNAPSHOT]"
  77 echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
  78 echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
  79 echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
  80 echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
  81
  82
  83
  84 clean_templated_files()
  85 {
  86   TEMPLATE_FILES=$(find . -name "*-template")
  87   for F in $TEMPLATE_FILES; do
  88     F2=$(echo "$F" | sed 's/-template$//')
  89     rm -f "$F2"
  90   done
  91 }
  92 clean_tox_files()
  93 {
  94   TOX_FILES=$(find . -name ".tox")
  95   TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
  96   for F in $TOX_FILES; do
  97     rm -rf "$F"
  98   done
  99 }
 100
 101 expand_templates()
 102 {
 103   set +x
 104   # set up env variables, get ready for template resolution
 105   # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
 106   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
 107   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
 108   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
 109   export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
 110
 111
 112   if [ -z "$RELEASE_TAG" ]; then
 113     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
 114     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
 115     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
 116     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
 117     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
 118     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
 119   else
 120     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
 121     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
 122     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
 123     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
 124     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
 125     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
 126   fi
 127
 128
 129   export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
 130
 131   # docker registry templates are for poll, so use PUBLIC registry
 132   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
 133   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
 134
 135   # Mvn repo
 136   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
 137   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
 138   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
 139
 140
 141   export ONAPTEMPLATE_STANDARD_INPUTS_TYPES="  # standard inputs list
 142   centos7image_id:
 143     type: string
 144   ubuntu1604image_id:
 145     type: string
 146   flavor_id:
 147     type: string
 148   security_group:
 149     type: string
 150   public_net:
 151     type: string
 152   private_net:
 153     type: string
 154   openstack: {}
 155   keypair:
 156     type: string
 157   key_filename:
 158     type: string
 159   location_prefix:
 160     type: string
 161   location_domain:
 162     type: string
 163   codesource_url:
 164     type: string
 165   codesource_version:
 166     type: string"
 167
 168
 169   TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
 170   if [ -z "$TEMPLATES" ]; then
 171     echo "No template variables found!"
 172     return 0
 173   fi
 174
 175   TEMPLATE_FILES=$(find . -name "*-template")
 176   for F in $TEMPLATE_FILES; do
 177     F2=$(echo "$F" | sed 's/-template$//')
 178     cp -p "$F" "$F2"
 179     chmod u+w "$F2"
 180
 181     echo "====> Resolving the following template from environment variables "
 182     echo "$TEMPLATES"
 183     for KEY in $TEMPLATES; do
 184       VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
 185       VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
 186
 187       echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
 188       sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
 189     done
 190   done
 191   echo "====> Done template resolving"
 192 }
 193
 194 test_templates()
 195 {
 196     # make certain that the type references exist
 197     TMP=$(mktemp)
 198     trap 'rm -f $TMP' 0 1 2 3 15
 199
 200     echo Verify that all of the import URLs are correct
 201     find . -name '*-template' | sed -e 's/-template$//' |
 202     while read file
 203     do
 204         egrep '^  - .?https?://' < "$file"
 205     done  | awk '{print $2}' | sed -e 's/"//g' | sort -u |
 206     while read url
 207     do
 208         curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
 209         case $(< "$TMP") in
 210             2* ) ;;
 211             * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
 212         esac
 213     done
 214
 215     echo Verify that the inputs are correct
 216     PATH=$PATH:$PWD/check-blueprint-vs-input/bin
 217     find . -name '*-template' | sed -e 's/-template$//' |
 218     while read blueprint
 219     do
 220         check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml || true
 221     done
 222 }
 223
 224
 225 run_tox_test()
 226 {
 227   set -e -x
 228   CURDIR=$(pwd)
 229   TOXINIS=$(find . -name "tox.ini")
 230   for TOXINI in "${TOXINIS[@]}"; do
 231     DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
 232     cd "${CURDIR}/${DIR}"
 233     rm -rf ./venv-tox ./.tox
 234     virtualenv ./venv-tox
 235     source ./venv-tox/bin/activate
 236     pip install pip==9.0.3
 237     pip install --upgrade argparse
 238     pip install tox==2.9.1
 239     pip freeze
 240     tox
 241     deactivate
 242     rm -rf ./venv-tox ./.tox
 243   done
 244 }
 245
 246 build_wagons()
 247 {
 248   rm -rf ./*.wgn venv-pkg
 249   SETUPFILES=$(find . -name "setup.py")
 250
 251   virtualenv ./venv-pkg
 252   source ./venv-pkg/bin/activate
 253   pip install --upgrade pip
 254   pip install wagon
 255
 256   CURDIR=$(pwd)
 257   for SETUPFILE in $SETUPFILES; do
 258     PLUGIN_DIR=$(dirname "$SETUPFILE")
 259     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 260     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 261
 262     echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
 263
 264     wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
 265
 266     PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
 267     echo Built package: "${PKG_FILE_NAMES[@]}"
 268     cd "$CURDIR"
 269   done
 270
 271   deactivate
 272   rm -rf venv-pkg
 273 }
 274
 275 build_archives_for_wagons()
 276 {
 277   rm -rf ./*.tgz ./*.zip venv-pkg
 278
 279   SETUPFILES=$(find "$(pwd)" -name "setup.py")
 280   CURDIR=$(pwd)
 281   for SETUPFILE in $SETUPFILES; do
 282     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
 283     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
 284     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 285     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 286
 287     cd "${PLUGIN_FULL_DIR}"/..
 288     echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
 289
 290     zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
 291     tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
 292
 293     echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
 294     cd "$CURDIR"
 295   done
 296 }
 297
 298
 299 upload_raw_file()
 300 {
 301   # Extract the username and password to the nexus repo from the settings file
 302   USER=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()")
 303   PASS=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()")
 304   NETRC=$(mktemp)
 305   echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
 306
 307   REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
 308
 309   OUTPUT_FILE=$1
 310   EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
 311   if [ "$EXT" == 'yaml' ]; then
 312     OUTPUT_FILE_TYPE='text/x-yaml'
 313   elif [ "$EXT" == 'sh' ]; then
 314     OUTPUT_FILE_TYPE='text/x-shellscript'
 315   elif [ "$EXT" == 'gz' ]; then
 316     OUTPUT_FILE_TYPE='application/gzip'
 317   elif [ "$EXT" == 'tgz' ]; then
 318     OUTPUT_FILE_TYPE='application/gzip'
 319   elif [ "$EXT" == 'zip' ]; then
 320     OUTPUT_FILE_TYPE='application/zip'
 321   elif [ "$EXT" == 'wgn' ]; then
 322     OUTPUT_FILE_TYPE='application/gzip'
 323   else
 324     OUTPUT_FILE_TYPE='application/octet-stream'
 325   fi
 326
 327   # for multi module projects, the raw repo path must match with project name, not project + module
 328   # FQDN is project + module
 329   # GROUPID is project name
 330   if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
 331     PROJECT_NAME=${MVN_PROJECT_GROUPID}
 332   else
 333     PROJECT_NAME=${FQDN}
 334   fi
 335
 336   if [ -z "$RELEASE_TAG" ]; then
 337     SEND_TO="${REPO}/${PROJECT_NAME}"
 338   else
 339     SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
 340   fi
 341
 342   if [ ! -z "$2" ]; then
 343     SEND_TO="$SEND_TO/$2"
 344   fi
 345
 346   echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
 347   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
 348   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
 349 }
 350
 351 upload_wagon_archives()
 352 {
 353   SETUPFILES=$(find "$(pwd)" -name "setup.py")
 354   CURDIR=$(pwd)
 355   for SETUPFILE in $SETUPFILES; do
 356     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
 357     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
 358     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 359     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 360
 361     cd "${PLUGIN_FULL_DIR}"/..
 362     echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
 363     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
 364     if [ -z "$ARCHIVE_FILE_NAME" ]; then
 365       echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
 366       exit -1
 367     fi
 368     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 369
 370     echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
 371     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
 372     if [ -z "$ARCHIVE_FILE_NAME" ]; then
 373       echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
 374       exit -1
 375     fi
 376     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 377
 378     cd "${CURDIR}"
 379   done
 380 }
 381
 382 upload_wagons_and_type_yamls()
 383 {
 384   SETUPFILES=$(find . -name "setup.py")
 385
 386   CURDIR=$(pwd)
 387   for SETUPFILE in $SETUPFILES; do
 388     PLUGIN_DIR=$(dirname "$SETUPFILE")
 389     PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 390     PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 391     PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
 392     PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
 393
 394     echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
 395
 396     TYPEFILE_NAME=$(grep -R "package_name:[[:space:]]*${PLUGIN_NAME}" | cut -f1 -d ':')
 397     if [ -z "$TYPEFILE_NAME" ]; then
 398       echo "!!! No typefile found with matching package name $PLUGIN_NAME"
 399       exit -1
 400     fi
 401     NEWFILENAME="${PLUGIN_NAME}"_types.yaml
 402     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
 403       echo "copy typefile to standard naming"
 404       cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
 405     fi
 406
 407     TYPEFILE_PACKAGE_VERSION=$(grep -R 'package_version' "$TYPEFILE_NAME" |cut -f2 -d ':' |sed -r 's/\s+//g')
 408     WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
 409     if [ -z "$WAGONFILE_NAME" ]; then
 410       echo "!!! No wagonfile found with matching package name and version as required in typefile: "
 411       echo "    $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
 412       exit -1
 413     fi
 414
 415     upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 416     upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 417
 418     rm -r "$WAGONFILE_NAME"
 419     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
 420       rm -f "$NEWFILENAME"
 421     fi
 422   done
 423 }
 424
 425 upload_files_of_extension()
 426 {
 427   FILES=$(ls -1 ./*."$1")
 428   for F in $FILES ; do
 429     upload_raw_file "$F" "$2"
 430   done
 431 }
 432 upload_files_of_extension_recursively()
 433 {
 434   FILES=$(find . -name "*.$1")
 435   for F in $FILES ; do
 436     upload_raw_file "$F" "$2"
 437   done
 438 }
 439
 440
 441 generate_pypirc_then_publish()
 442 {
 443   set +x
 444   USER=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()")
 445   PASS=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()")
 446
 447   if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
 448     MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
 449   fi
 450
 451
 452   cat > ~/.pypirc <<EOL
 453 [distutils]
 454 index-servers =
 455   $MVN_PYPISERVER_SERVERID
 456
 457 [$MVN_PYPISERVER_SERVERID]
 458 repository: $MVN_PYPISERVER_BASEURL
 459 username: $USER
 460 password: $PASS
 461 EOL
 462
 463   # this may fail if a package of same version exists
 464   python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
 465   set -x
 466 }
 467
 468
 469
 470 # following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
 471 #IndependentVersioningandReleaseProcess-StandardizedDockerTagging
 472 build_and_push_docker()
 473 {
 474   # Old tagging
 475   #IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
 476   # new tagging
 477   ENDID=$(echo $FQDN | rev | cut -f1 -d '.' |rev)
 478   if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
 479     #IMAGENAME="onap/${FQDN/org.onap./}"
 480     IMAGENAME="onap/${FQDN}"
 481   else
 482     #IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
 483     IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
 484   fi
 485
 486   IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
 487   IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
 488
 489   # use the major and minor version of the MVN artifact version as docker image version
 490   VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
 491   VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
 492
 493   LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
 494   # build a docker image
 495   docker build --rm -f ./Dockerfile -t "${LFQI}" ./
 496
 497   # all local builds push to SNAPSHOT repo
 498   REPO=""
 499   if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
 500      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 501   elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
 502      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 503   else
 504      echo "Fail to determine DEPLOYMENT_TYPE"
 505      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 506   fi
 507   echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
 508
 509   if [ ! -z "$REPO" ]; then
 510     USER=$(xpath  "$SETTINGS_FILE" "//servers/server[id='$REPO']/username/text()")
 511     PASS=$(xpath  "$SETTINGS_FILE" "//servers/server[id='$REPO']/password/text()")
 512     if [ -z "$USER" ]; then
 513       echo "Error: no user provided"
 514     fi
 515     if [ -z "$PASS" ]; then
 516       echo "Error: no password provided"
 517     fi
 518     [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
 519     echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
 520
 521     set +x
 522     docker login "$REPO" -u "$USER" -p "$PASS"
 523     set -x
 524
 525     # local tag is imagename:version-timestamp
 526     OLDTAG="${LFQI}"
 527     # three tags are pushed:
 528     #   {imagename}:{semver}-SNAPSHOT-{timestamp}Z       this is what CIMAN-132 asks
 529     #   {imagename}:{semver}                             latest of current version, for testing
 530     #   {imagename}:latest                               latest of all, used mainly by csit
 531     # LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
 532
 533
 534
 535     # Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
 536     PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
 537
 538     for NEWTAG in ${PUSHTAGS}
 539     do
 540       echo "tagging ${OLDTAG} to ${NEWTAG}"
 541       docker tag "${OLDTAG}" "${NEWTAG}"
 542       echo "pushing ${NEWTAG}"
 543       docker push "${NEWTAG}"
 544       OLDTAG="${NEWTAG}"
 545     done
 546   fi
 547 }