mvn-phase-lib.sh

   1 #!/bin/bash
   2
   3 # ================================================================================
   4 # Copyright (c) 2017-2020 AT&T Intellectual Property. All rights reserved.
   5 # ================================================================================
   6 # Licensed under the Apache License, Version 2.0 (the "License");
   7 # you may not use this file except in compliance with the License.
   8 # You may obtain a copy of the License at
   9 #
  10 #     http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 # Unless required by applicable law or agreed to in writing, software
  13 # distributed under the License is distributed on an "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 # See the License for the specific language governing permissions and
  16 # limitations under the License.
  17 # ============LICENSE_END=========================================================
  18
  19
  20 #MVN_PROJECT_MODULEID="$1"
  21 #MVN_PHASE="$2"
  22 #PROJECT_ROOT=$(dirname $0)
  23
  24 FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}"
  25 if [ "$MVN_PROJECT_MODULEID" == "__" ]; then
  26   MVN_PROJECT_MODULEID=""
  27 fi
  28
  29 if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then
  30   echo "=> for SNAPSHOT artifact build"
  31   MVN_DEPLOYMENT_TYPE='SNAPSHOT'
  32 else
  33   echo "=> for STAGING/RELEASE artifact build"
  34   MVN_DEPLOYMENT_TYPE='STAGING'
  35 fi
  36 echo "MVN_DEPLOYMENT_TYPE is             [$MVN_DEPLOYMENT_TYPE]"
  37
  38
  39 TIMESTAMP=$(date +%C%y%m%dT%H%M%S)
  40
  41 # expected environment variables
  42 if [ -z "${MVN_NEXUSPROXY}" ]; then
  43     echo "MVN_NEXUSPROXY environment variable not set.  Cannot proceed"
  44     exit
  45 fi
  46 MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':')
  47 echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY"
  48
  49 if [ -z "$WORKSPACE" ]; then
  50     WORKSPACE=$(pwd)
  51 fi
  52
  53 export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml}
  54
  55 RELEASE_TAG=${MVN_RELEASE_TAG:-R7}
  56 if [ "$RELEASE_TAG" == "R1" ]; then
  57   unset RELEASE_TAG
  58 fi
  59
  60
  61 # mvn phase in life cycle
  62 MVN_PHASE="$2"
  63
  64 echo "MVN_RELEASE_TAG is                 [$MVN_RELEASE_TAG]"
  65 echo "MVN_PROJECT_MODULEID is            [$MVN_PROJECT_MODULEID]"
  66 echo "MVN_PHASE is                       [$MVN_PHASE]"
  67 echo "MVN_PROJECT_GROUPID is             [$MVN_PROJECT_GROUPID]"
  68 echo "MVN_PROJECT_ARTIFACTID is          [$MVN_PROJECT_ARTIFACTID]"
  69 echo "MVN_PROJECT_VERSION is             [$MVN_PROJECT_VERSION]"
  70 echo "MVN_NEXUSPROXY is                  [$MVN_NEXUSPROXY]"
  71 echo "MVN_RAWREPO_BASEURL_UPLOAD is      [$MVN_RAWREPO_BASEURL_UPLOAD]"
  72 echo "MVN_RAWREPO_BASEURL_DOWNLOAD is    [$MVN_RAWREPO_BASEURL_DOWNLOAD]"
  73 MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':')
  74 echo "MVN_RAWREPO_HOST is                [$MVN_RAWREPO_HOST]"
  75 echo "MVN_RAWREPO_SERVERID is            [$MVN_RAWREPO_SERVERID]"
  76 echo "MVN_DOCKERREGISTRY_SNAPSHOT is     [$MVN_DOCKERREGISTRY_SNAPSHOT]"
  77 echo "MVN_DOCKERREGISTRY_PUBLIC is       [$MVN_DOCKERREGISTRY_PUBLIC]"
  78 echo "MVN_DOCKERREGISTRY_RELEASE is      [$MVN_DOCKERREGISTRY_RELEASE]"
  79 echo "MVN_PYPISERVER_SERVERID            [$MVN_PYPISERVER_SERVERID]"
  80 echo "MVN_PYPISERVER_BASEURL is          [$MVN_PYPISERVER_BASEURL]"
  81
  82
  83
  84 clean_templated_files()
  85 {
  86   TEMPLATE_FILES=$(find . -name "*-template")
  87   for F in $TEMPLATE_FILES; do
  88     F2=$(echo "$F" | sed 's/-template$//')
  89     rm -f "$F2"
  90   done
  91 }
  92 clean_tox_files()
  93 {
  94   TOX_FILES=$(find . -name ".tox")
  95   TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
  96   for F in $TOX_FILES; do
  97     rm -rf "$F"
  98   done
  99 }
 100
 101 expand_templates()
 102 {
 103   set +x
 104
 105   if [ -z "$RELEASE_TAG" ]; then
 106     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
 107     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
 108     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
 109     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
 110     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
 111     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
 112   else
 113     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
 114     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/$RELEASE_TAG"
 115     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
 116     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/$RELEASE_TAG"
 117     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
 118     export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/$RELEASE_TAG"
 119   fi
 120
 121
 122   export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_PYPISERVER_BASEURL}"
 123
 124   # docker registry templates are for poll, so use PUBLIC registry
 125   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="${MVN_DOCKERREGISTRY_PUBLIC}"
 126   export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="${MVN_DOCKERREGISTRY_PUBLIC}"
 127
 128   # Mvn repo
 129   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_snapshots="${MVN_NEXUSPROXY}/service/local/repositories/snapshots/content/org/onap/dcaegen2/analytics/tca"
 130   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_staging="${MVN_NEXUSPROXY}/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca"
 131   export ONAPTEMPLATE_MVN_org_onap_dcaegen2_analytics_tca_releases="${MVN_NEXUSPROXY}/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca"
 132
 133
 134   export ONAPTEMPLATE_STANDARD_INPUTS_TYPES="  # standard inputs list
 135   centos7image_id:
 136     type: string
 137   ubuntu1604image_id:
 138     type: string
 139   flavor_id:
 140     type: string
 141   security_group:
 142     type: string
 143   public_net:
 144     type: string
 145   private_net:
 146     type: string
 147   openstack: {}
 148   keypair:
 149     type: string
 150   key_filename:
 151     type: string
 152   location_prefix:
 153     type: string
 154   location_domain:
 155     type: string
 156   codesource_url:
 157     type: string
 158   codesource_version:
 159     type: string"
 160
 161
 162   TEMPLATES=$(env |grep ONAPTEMPLATE | sed 's/=.*//' | sort -u)
 163   if [ -z "$TEMPLATES" ]; then
 164     echo "No template variables found!"
 165     return 0
 166   fi
 167
 168   TEMPLATE_FILES=$(find . -name "*-template")
 169   for F in $TEMPLATE_FILES; do
 170     F2=$(echo "$F" | sed 's/-template$//')
 171     cp -p "$F" "$F2"
 172     chmod u+w "$F2"
 173
 174     echo "====> Resolving the following template from environment variables "
 175     echo "$TEMPLATES"
 176     for KEY in $TEMPLATES; do
 177       VALUE1=$(eval 'echo "$'"$KEY"'"' | sed 1q)
 178       VALUE2=$(eval 'echo "$'"$KEY"'"' | sed -e 's/\//\\\//g' -e 's/$/\\/' -e '$s/\\$//')
 179
 180       echo "======> Resolving template $KEY to value $VALUE1 for file $F2"
 181       sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F2"
 182     done
 183   done
 184   echo "====> Done template resolving"
 185 }
 186
 187 test_templates()
 188 {
 189     # make certain that the type references exist
 190     TMP=$(mktemp)
 191     trap 'rm -f $TMP' 0 1 2 3 15
 192
 193     echo Verify that all of the import URLs are correct
 194     find . -name '*-template' | sed -e 's/-template$//' |
 195     while read file
 196     do
 197         egrep '^  - .?https?://' < "$file"
 198     done  | awk '{print $2}' | sed -e 's/"//g' | sort -u |
 199     while read url
 200     do
 201         curl -L -w '%{http_code}' -s -o /dev/null "$url" > "$TMP"
 202         case $(< "$TMP") in
 203             2* ) ;;
 204             * ) echo ">>>>>>>>>>>>>>>> $url not found <<<<<<<<<<<<<<<<" ;;
 205         esac
 206     done
 207
 208     echo Verify that the inputs are correct
 209     PATH=$PATH:$PWD/check-blueprint-vs-input/bin
 210     find . -name '*-template' | sed -e 's/-template$//' |
 211     while read blueprint
 212     do
 213         check-blueprint-vs-input -b "$blueprint" -i check-blueprint-vs-input/lib/sample-inputs.yaml || true
 214     done
 215 }
 216
 217
 218 run_tox_test()
 219 {
 220   set -e -x
 221   CURDIR=$(pwd)
 222   TOXINIS=$(find . -name "tox.ini")
 223   for TOXINI in "${TOXINIS[@]}"; do
 224     DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
 225     cd "${CURDIR}/${DIR}"
 226     rm -rf ./venv-tox ./.tox
 227     virtualenv ./venv-tox
 228     source ./venv-tox/bin/activate
 229
 230     pip install --upgrade pip
 231     pip install --upgrade setuptools
 232     pip install --upgrade argparse
 233     pip install 'virtualenv==20.0.28'
 234     pip install tox
 235     pip freeze
 236     pwd
 237     tox
 238     deactivate
 239     rm -rf ./venv-tox ./.tox
 240   done
 241 }
 242
 243 build_wagons()
 244 {
 245   rm -rf ./*.wgn venv-pkg
 246   SETUPFILES=$(find . -name "setup.py")
 247
 248   virtualenv ./venv-pkg
 249   source ./venv-pkg/bin/activate
 250   pip install --upgrade pip
 251   pip install wagon
 252
 253   CURDIR=$(pwd)
 254   for SETUPFILE in $SETUPFILES; do
 255     PLUGIN_DIR=$(dirname "$SETUPFILE")
 256     PLUGIN_NAME=$(grep 'name[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 257     PLUGIN_VERSION=$(grep 'version[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 258
 259     echo "In $PLUGIN_DIR, build plugin $PLUGIN_NAME, version $PLUGIN_VERSION"
 260
 261     wagon create -r "${PLUGIN_DIR}/requirements.txt" --format tar.gz "${PLUGIN_DIR}"
 262
 263     PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
 264     echo Built package: "${PKG_FILE_NAMES[@]}"
 265     cd "$CURDIR"
 266   done
 267
 268   deactivate
 269   rm -rf venv-pkg
 270 }
 271
 272 build_archives_for_wagons()
 273 {
 274   rm -rf ./*.tgz ./*.zip venv-pkg
 275
 276   SETUPFILES=$(find "$(pwd)" -name "setup.py")
 277   CURDIR=$(pwd)
 278   for SETUPFILE in $SETUPFILES; do
 279     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
 280     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
 281     PLUGIN_NAME=$(grep 'name[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 282     PLUGIN_VERSION=$(grep 'version[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 283
 284     cd "${PLUGIN_FULL_DIR}"/..
 285     echo "In $(pwd), build plugin zip $PLUGIN_NAME, version $PLUGIN_VERSION"
 286
 287     zip -r "${PLUGIN_NAME}-${PLUGIN_VERSION}.zip" "./${PLUGIN_BASE_DIR}"
 288     tar -czvf "${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz" "./${PLUGIN_BASE_DIR}"
 289
 290     echo "Built archives for package ${PLUGIN_NAME}-${PLUGIN_VERSION} at $(pwd)"
 291     cd "$CURDIR"
 292   done
 293 }
 294
 295
 296 upload_raw_file()
 297 {
 298   # Extract the username and password to the nexus repo from the settings file
 299   USER=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()")
 300   PASS=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()")
 301   NETRC=$(mktemp)
 302   echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
 303
 304   REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
 305
 306   OUTPUT_FILE=$1
 307   EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
 308   if [ "$EXT" == 'yaml' ]; then
 309     OUTPUT_FILE_TYPE='text/x-yaml'
 310   elif [ "$EXT" == 'sh' ]; then
 311     OUTPUT_FILE_TYPE='text/x-shellscript'
 312   elif [ "$EXT" == 'gz' ]; then
 313     OUTPUT_FILE_TYPE='application/gzip'
 314   elif [ "$EXT" == 'tgz' ]; then
 315     OUTPUT_FILE_TYPE='application/gzip'
 316   elif [ "$EXT" == 'zip' ]; then
 317     OUTPUT_FILE_TYPE='application/zip'
 318   elif [ "$EXT" == 'wgn' ]; then
 319     OUTPUT_FILE_TYPE='application/gzip'
 320   else
 321     OUTPUT_FILE_TYPE='application/octet-stream'
 322   fi
 323
 324   # for multi module projects, the raw repo path must match with project name, not project + module
 325   # FQDN is project + module
 326   # GROUPID is project name
 327   if [ "$MVN_PROJECT_ARTIFACTID" == "$MVN_PROJECT_MODULEID" ]; then
 328     PROJECT_NAME=${MVN_PROJECT_GROUPID}
 329   else
 330     PROJECT_NAME=${FQDN}
 331   fi
 332
 333   if [ -z "$RELEASE_TAG" ]; then
 334     SEND_TO="${REPO}/${PROJECT_NAME}"
 335   else
 336     SEND_TO="${REPO}/${PROJECT_NAME}/${RELEASE_TAG}"
 337   fi
 338
 339   if [ ! -z "$2" ]; then
 340     SEND_TO="$SEND_TO/$2"
 341   fi
 342
 343   echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
 344   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${TIMESTAMP}"
 345   curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
 346 }
 347
 348 upload_wagon_archives()
 349 {
 350   SETUPFILES=$(find "$(pwd)" -name "setup.py")
 351   CURDIR=$(pwd)
 352   for SETUPFILE in $SETUPFILES; do
 353     PLUGIN_FULL_DIR=$(dirname "$SETUPFILE")
 354     PLUGIN_BASE_DIR=$(basename "$PLUGIN_FULL_DIR")
 355     PLUGIN_NAME=$(grep 'name[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 356     PLUGIN_VERSION=$(grep 'version[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 357
 358     cd "${PLUGIN_FULL_DIR}"/..
 359     echo "In $(pwd), upload zip archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
 360     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.zip"
 361     if [ -z "$ARCHIVE_FILE_NAME" ]; then
 362       echo "!!! No zip archive file found ${ARCHIVE_FILE_NAME}"
 363       exit -1
 364     fi
 365     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 366
 367     echo "In $(pwd), upload tgz archive for $PLUGIN_NAME, version $PLUGIN_VERSION"
 368     ARCHIVE_FILE_NAME="${PLUGIN_NAME}-${PLUGIN_VERSION}.tgz"
 369     if [ -z "$ARCHIVE_FILE_NAME" ]; then
 370       echo "!!! No tgz archive file found ${ARCHIVE_FILE_NAME}"
 371       exit -1
 372     fi
 373     upload_raw_file "${ARCHIVE_FILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 374
 375     cd "${CURDIR}"
 376   done
 377 }
 378
 379 upload_wagons_and_type_yamls()
 380 {
 381   SETUPFILES=$(find . -name "setup.py")
 382
 383   CURDIR=$(pwd)
 384   for SETUPFILE in $SETUPFILES; do
 385     PLUGIN_DIR=$(dirname "$SETUPFILE")
 386     PLUGIN_NAME=$(grep 'name[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
 387     PLUGIN_VERSION=$(grep 'version[[:space:]]*=' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
 388     PLUGIN_VERSION_MAJOR=$(echo "$PLUGIN_VERSION" | cut -f1 -d'.')
 389     PLUGIN_VERSION_MAJOR_MINOR=$(echo "$PLUGIN_VERSION" | cut -f1-2 -d'.')
 390
 391     echo "Found setup file in $PLUGIN_DIR, for plugin $PLUGIN_NAME version $PLUGIN_VERSION"
 392
 393     TYPEFILE_NAME=$( grep -l "package_name[[:space:]]*:[[:space:]]*${PLUGIN_NAME}" * 2>/dev/null || true )
 394     if [ -z "$TYPEFILE_NAME" ]; then
 395       echo "!!! No typefile found with matching package name $PLUGIN_NAME"
 396       exit -1
 397     fi
 398     NEWFILENAME="${PLUGIN_NAME}"_types.yaml
 399     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
 400       echo "copy typefile to standard naming"
 401       cp -f "$TYPEFILE_NAME" "$NEWFILENAME"
 402     fi
 403
 404     TYPEFILE_PACKAGE_VERSION=$(grep 'package_version[[:space:]]*:' "$TYPEFILE_NAME" |cut -f2 -d ':' |sed -r 's/\s+//g')
 405     WAGONFILE_NAME=$(ls -1 "${PLUGIN_NAME}"-"${TYPEFILE_PACKAGE_VERSION}"-*.wgn)
 406     if [ -z "$WAGONFILE_NAME" ]; then
 407       echo "!!! No wagonfile found with matching package name and version as required in typefile: "
 408       echo "    $TYPEFILE_NAME plugin $PLUGIN_NAME package version ${TYPEFILE_PACKAGE_VERSION}"
 409       exit -1
 410     fi
 411
 412     upload_raw_file "${NEWFILENAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 413     upload_raw_file "${WAGONFILE_NAME}" "${PLUGIN_NAME}/${PLUGIN_VERSION}"
 414
 415     rm -r "$WAGONFILE_NAME"
 416     if [ "$TYPEFILE_NAME" != "$NEWFILENAME" ]; then
 417       rm -f "$NEWFILENAME"
 418     fi
 419   done
 420 }
 421
 422 upload_files_of_extension()
 423 {
 424   FILES=$(ls -1 ./*."$1")
 425   for F in $FILES ; do
 426     upload_raw_file "$F" "$2"
 427   done
 428 }
 429 upload_files_of_extension_recursively()
 430 {
 431   FILES=$(find . -name "*.$1")
 432   for F in $FILES ; do
 433     upload_raw_file "$F" "$2"
 434   done
 435 }
 436
 437
 438 generate_pypirc_then_publish()
 439 {
 440   set +x
 441   USER=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_PYPISERVER_SERVERID']/username/text()")
 442   PASS=$(xpath "$SETTINGS_FILE" "//servers/server[id='$MVN_PYPISERVER_SERVERID']/password/text()")
 443
 444   if [[ "$MVN_PYPISERVER_BASEURL" != */ ]]; then
 445     MVN_PYPISERVER_BASEURL="${MVN_PYPISERVER_BASEURL}/"
 446   fi
 447
 448
 449   cat > ~/.pypirc <<EOL
 450 [distutils]
 451 index-servers =
 452   $MVN_PYPISERVER_SERVERID
 453
 454 [$MVN_PYPISERVER_SERVERID]
 455 repository: $MVN_PYPISERVER_BASEURL
 456 username: $USER
 457 password: $PASS
 458 EOL
 459
 460   # this may fail if a package of same version exists
 461   python setup.py sdist register -r "$MVN_PYPISERVER_SERVERID" upload -r "$MVN_PYPISERVER_SERVERID"
 462   set -x
 463 }
 464
 465
 466
 467 # following the https://wiki.onap.org/display/DW/Independent+Versioning+and+Release+Process
 468 #IndependentVersioningandReleaseProcess-StandardizedDockerTagging
 469 build_and_push_docker()
 470 {
 471   # Old tagging
 472   #IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
 473   # new tagging
 474   ENDID=$(echo $FQDN | rev | cut -f1 -d '.' |rev)
 475   if [ "$ENDID" == "${MVN_PROJECT_MODULEID}" ]; then
 476     #IMAGENAME="onap/${FQDN/org.onap./}"
 477     IMAGENAME="onap/${FQDN}"
 478   else
 479     #IMAGENAME="onap/${FQDN/org.onap./}.${MVN_PROJECT_MODULEID}"
 480     IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
 481   fi
 482
 483   IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
 484   IMAGENAME=$(echo "$IMAGENAME" | tr '[:upper:]' '[:lower:]')
 485
 486   # use the major and minor version of the MVN artifact version as docker image version
 487   VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
 488   VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
 489
 490   LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
 491   # build a docker image
 492   docker build --rm -f ./Dockerfile -t "${LFQI}" ./
 493
 494   # all local builds push to SNAPSHOT repo
 495   REPO=""
 496   if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
 497      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 498   elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
 499      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 500   else
 501      echo "Fail to determine DEPLOYMENT_TYPE"
 502      REPO=$MVN_DOCKERREGISTRY_SNAPSHOT
 503   fi
 504   echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
 505
 506   if [ ! -z "$REPO" ]; then
 507     USER=$(xpath  "$SETTINGS_FILE" "//servers/server[id='$REPO']/username/text()")
 508     PASS=$(xpath  "$SETTINGS_FILE" "//servers/server[id='$REPO']/password/text()")
 509     if [ -z "$USER" ]; then
 510       echo "Error: no user provided"
 511     fi
 512     if [ -z "$PASS" ]; then
 513       echo "Error: no password provided"
 514     fi
 515     [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
 516     echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
 517
 518     set +x
 519     docker login "$REPO" -u "$USER" -p "$PASS"
 520     set -x
 521
 522     # local tag is imagename:version-timestamp
 523     OLDTAG="${LFQI}"
 524     # three tags are pushed:
 525     #   {imagename}:{semver}-SNAPSHOT-{timestamp}Z       this is what CIMAN-132 asks
 526     #   {imagename}:{semver}                             latest of current version, for testing
 527     #   {imagename}:latest                               latest of all, used mainly by csit
 528     # LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"Z
 529
 530
 531
 532     # Updating tags for ${REPO}/${IMAGENAME}:${VERSION} to include STAGING-latest; and adding new tag for major:minor-STAGING-latest
 533     PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION}-SNAPSHOT-${TIMESTAMP}Z ${REPO}/${IMAGENAME}:${VERSION2}-STAGING-latest ${REPO}/${IMAGENAME}:${VERSION}-STAGING-latest ${REPO}/${IMAGENAME}:latest"
 534
 535     for NEWTAG in ${PUSHTAGS}
 536     do
 537       echo "tagging ${OLDTAG} to ${NEWTAG}"
 538       docker tag "${OLDTAG}" "${NEWTAG}"
 539       echo "pushing ${NEWTAG}"
 540       docker push "${NEWTAG}"
 541       OLDTAG="${NEWTAG}"
 542     done
 543   fi
 544 }