2 #============LICENSE_START========================================================
3 # ================================================================================
4 # Copyright (c) 2021 J. F. Lucas. All rights reserved.
5 # Copyright (c) 2021 AT&T Intellectual Property. All rights reserved.
6 # Copyright (c) 2021 Nokia. All rights reserved.
7 # Copyright (c) 2021 Nordix Foundation.
8 # ================================================================================
9 # Licensed under the Apache License, Version 2.0 (the "License");
10 # you may not use this file except in compliance with the License.
11 # You may obtain a copy of the License at
13 # http://www.apache.org/licenses/LICENSE-2.0
15 # Unless required by applicable law or agreed to in writing, software
16 # distributed under the License is distributed on an "AS IS" BASIS,
17 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
18 # See the License for the specific language governing permissions and
19 # limitations under the License.
20 # ============LICENSE_END=========================================================
23 For internal use only!
25 dcaegen2-services-common._ms-specific-env-vars:
26 This template generates a list of microservice-specific environment variables
27 as specified in .Values.applicationEnv. The
28 dcaegen2-services-common.microServiceDeployment uses this template
29 to add the microservice-specific environment variables to the microservice's container.
30 These environment variables are in addition to a standard set of environment variables
31 provided to all microservices.
33 The template expects a single argument, pointing to the caller's global context.
35 Microservice-specific environment variables can be specified in two ways:
36 1. As literal string values.
37 2. As values that are sourced from a secret, identified by the secret's
38 uid and the key within the secret that provides the value.
40 The following example shows an example of each type. The example assumes
41 that a secret has been created using the OOM common secret mechanism, with
42 a secret uid "example-secret" and a key called "password".
46 secretUid: example-secret
48 APPLICATION_EXAMPLE: "An example value"
50 The example would set two environment variables on the microservice's container,
51 one called "APPLICATION_PASSWORD" with the value set from the "password" key in
52 the secret with uid "example-secret", and one called "APPLICATION_EXAMPLE" set to
53 the the literal string "An example value".
55 {{- define "dcaegen2-services-common._ms-specific-env-vars" -}}
57 {{- if .Values.applicationEnv }}
58 {{- range $envName, $envValue := .Values.applicationEnv }}
59 {{- if kindIs "string" $envValue }}
60 - name: {{ $envName }}
61 value: {{ $envValue | quote }}
63 {{ if or (not $envValue.secretUid) (not $envValue.key) }}
64 {{ fail (printf "Env %s definition is not a string and does not contain secretUid or key fields" $envName) }}
66 - name: {{ $envName }}
67 {{- include "common.secret.envFromSecretFast" (dict "global" $global "uid" $envValue.secretUid "key" $envValue.key) | indent 2 }}
73 For internal use only!
75 dcaegen2-services-common._externalVolumes:
76 This template generates a list of volumes associated with the pod,
77 based on information provided in .Values.externalVolumes. This
78 template works in conjunction with dcaegen2-services-common._externalVolumeMounts
79 to give the microservice access to data in volumes created else.
80 This initial implementation supports ConfigMaps only, as this is the only
81 external volume mounting required by current microservices.
83 .Values.externalVolumes is a list of objects. Each object has 3 required fields and 2 optional fields:
84 - name: the name of the resource (in the current implementation, it must be a ConfigMap)
85 that is to be set up as a volume. The value is a case sensitive string. Because the
86 names of resources are sometimes set at deployment time (for instance, to prefix the Helm
87 release to the name), the string can be a Helm template fragment that will be expanded at
89 - type: the type of the resource (in the current implementation, only "ConfigMap" is supported).
90 The value is a case-INsensitive string.
91 - mountPoint: the path to the mount point for the volume in the container file system. The
92 value is a case-sensitive string.
93 - readOnly: (Optional) Boolean flag. Set to true to mount the volume as read-only.
95 - optional: (Optional) Boolean flag. Set to true to make the configMap optional (i.e., to allow the
96 microservice's pod to start even if the configMap doesn't exist). If set to false, the configMap must
97 be present in order for the microservice's pod to start. Defaults to true. (Note that this
98 default is the opposite of the Kubernetes default. We've done this to be consistent with the behavior
99 of the DCAE Cloudify plugin for Kubernetes [k8splugin], which always set "optional" to true.)
101 Here is an example fragment from a values.yaml file for a microservice:
104 - name: my-example-configmap
106 mountPath: /opt/app/config
107 - name: '{{ include "common.release" . }}-another-example'
109 mountPath: /opt/app/otherconfig
112 {{- define "dcaegen2-services-common._externalVolumes" -}}
114 {{- if .Values.externalVolumes }}
115 {{- range $vol := .Values.externalVolumes }}
116 {{- if eq (lower $vol.type) "configmap" }}
117 {{- $vname := (tpl $vol.name $global) -}}
118 {{- $opt := hasKey $vol "optional" | ternary $vol.optional true }}
129 For internal use only!
131 dcaegen2-services-common._externalVolumeMounts:
132 This template generates a list of volume mounts for the microservice container,
133 based on information provided in .Values.externalVolumes. This
134 template works in conjunction with dcaegen2-services-common._externalVolumes
135 to give the microservice access to data in volumes created else.
136 This initial implementation supports ConfigMaps only, as this is the only
137 external volume mounting required by current microservices.
139 See the documentation for dcaegen2-services-common._externalVolumes for
140 details on how external volumes are specified in the values.yaml file for
143 {{- define "dcaegen2-services-common._externalVolumeMounts" -}}
145 {{- if .Values.externalVolumes }}
146 {{- range $vol := .Values.externalVolumes }}
147 {{- if eq (lower $vol.type) "configmap" }}
148 {{- $vname := (tpl $vol.name $global) -}}
149 {{- $readOnly := $vol.readOnly | default false }}
150 - mountPath: {{ $vol.mountPath }}
152 readOnly: {{ $readOnly }}
158 dcaegen2-services-common.microserviceDeployment:
159 This template produces a Kubernetes Deployment for a DCAE microservice.
161 All DCAE microservices currently use very similar Deployments. Having a
162 common template eliminates a lot of repetition in the individual charts
163 for each microservice.
165 The template expects the full chart context as input. A chart for a
166 DCAE microservice references this template using:
167 {{ include "dcaegen2-services-common.microserviceDeployment" . }}
168 The template directly references data in .Values, and indirectly (through its
169 use of templates from the ONAP "common" collection) references data in
172 The exact content of the Deployment generated from this template
173 depends on the content of .Values.
175 The Deployment always includes a single Pod, with a container that uses
176 the DCAE microservice image.
178 The Deployment Pod may also include a logging sidecar container.
179 The sidecar is included if .Values.logDirectory is set. The
180 logging sidecar and the DCAE microservice container share a
181 volume where the microservice logs are written.
183 The Deployment includes an initContainer that pushes the
184 microservice's initial configuration (from .Values.applicationConfig)
185 into Consul. All DCAE microservices retrieve their initial
186 configurations by making an API call to a DCAE platform component called
187 the config-binding-service. The config-binding-service currently
188 retrieves configuration information from Consul.
190 The Deployment also includes an initContainer that checks for the
191 readiness of other components that the microservice relies on.
192 This container is generated by the "common.readinessCheck.waitfor"
195 If the microservice acts as a TLS client or server, the Deployment will
196 include an initContainer that retrieves certificate information from
197 the AAF certificate manager. The information is mounted at the
198 mount point specified in .Values.certDirectory. If the microservice is
199 a TLS server (indicated by setting .Values.tlsServer to true), the
200 certificate information will include a server cert and key, in various
201 formats. It will also include the AAF CA cert. If the microservice is
202 a TLS client only (indicated by setting .Values.tlsServer to false), the
203 certificate information includes only the AAF CA cert.
205 Deployed POD may also include a Policy-sync sidecar container.
206 The sidecar is included if .Values.policies is set. The
207 Policy-sync sidecar polls PolicyEngine (PDP) periodically based
208 on .Values.policies.duration and configuration retrieved is shared with
209 DCAE Microservice container by common volume. Policy can be retrieved based on
210 list of policyID or filter. An optional policyRelease parameter can be specified
211 to override the default policy helm release (used for retreiving the secret containing
212 pdp username and password)
214 Following is example policy config override
216 dcaePolicySyncImage: onap/org.onap.dcaegen2.deployments.dcae-services-policy-sync:1.0.1
219 policyRelease: "onap"
221 '["onap.vfirewall.tca","onap.vdns.tca"]'
224 {{- define "dcaegen2-services-common.microserviceDeployment" -}}
225 {{- $logDir := default "" .Values.logDirectory -}}
226 {{- $certDir := default "" .Values.certDirectory . -}}
227 {{- $tlsServer := default "" .Values.tlsServer -}}
228 {{- $commonRelease := print (include "common.release" .) -}}
229 {{- $policy := default dict .Values.policies -}}
230 {{- $policyRls := default $commonRelease $policy.policyRelease -}}
231 {{- $drFeedConfig := default "" .Values.drFeedConfig -}}
235 metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
238 selector: {{- include "common.selectors" . | nindent 4 }}
240 metadata: {{- include "common.templateMetadata" . | nindent 6 }}
243 {{- if not $drFeedConfig }}
249 {{- range $var := .Values.customEnvVars }}
250 export {{ $var.name }}="{{ $var.value }}";
252 cd /config-input && for PFILE in `ls -1`; do envsubst <${PFILE} >/config/${PFILE}; done
254 {{- range $cred := .Values.credentials }}
255 - name: {{ $cred.name }}
256 {{- include "common.secret.envFromSecretFast" (dict "global" $ "uid" $cred.uid "key" $cred.key) | indent 10 }}
259 - mountPath: /config-input
260 name: app-config-input
263 image: {{ include "repositoryGenerator.image.envsubst" . }}
264 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
265 name: {{ include "common.name" . }}-update-config
267 {{ include "common.readinessCheck.waitFor" . | indent 6 | trim }}
268 {{- include "common.dmaap.provisioning.initContainer" . | nindent 6 }}
270 image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.consulLoaderImage }}
271 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
274 - "{{ include "common.name" . }}|/app-config/application_config.yaml"
275 resources: {{ include "common.resources" . | nindent 2 }}
277 - mountPath: /app-config
281 image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.tlsImage }}
282 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
285 value: {{ $tlsServer | quote }}
290 fieldPath: status.podIP
291 resources: {{ include "common.resources" . | nindent 2 }}
293 - mountPath: /opt/app/osaaf
296 {{ include "dcaegen2-services-common._certPostProcessor" . | nindent 4 }}
298 - image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
299 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
300 name: {{ include "common.name" . }}
302 {{- range $cred := .Values.credentials }}
303 - name: {{ $cred.name }}
304 {{- include "common.secret.envFromSecretFast" (dict "global" $ "uid" $cred.uid "key" $cred.key) | indent 10 }}
307 - name: DCAE_CA_CERTPATH
308 value: {{ $certDir }}/cacert.pem
311 value: consul-server.onap
312 - name: CONFIG_BINDING_SERVICE
313 value: config-binding-service
314 - name: CBS_CONFIG_URL
315 value: https://config-binding-service:10443/service_component_all/{{ include "common.name" . }}
320 fieldPath: status.podIP
321 {{- include "dcaegen2-services-common._ms-specific-env-vars" . | nindent 8 }}
322 {{- if .Values.service }}
323 ports: {{ include "common.containerPorts" . | nindent 10 }}
325 {{- if .Values.readiness }}
327 initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds | default 5 }}
328 periodSeconds: {{ .Values.readiness.periodSeconds | default 15 }}
329 timeoutSeconds: {{ .Values.readiness.timeoutSeconds | default 1 }}
330 {{- $probeType := .Values.readiness.type | default "httpGet" -}}
331 {{- if eq $probeType "httpGet" }}
333 scheme: {{ .Values.readiness.scheme }}
334 path: {{ .Values.readiness.path }}
335 port: {{ .Values.readiness.port }}
337 {{- if eq $probeType "exec" }}
340 {{- range $cmd := .Values.readiness.command }}
345 resources: {{ include "common.resources" . | nindent 2 }}
347 - mountPath: /app-config
349 - mountPath: /app-config-input
350 name: app-config-input
352 - mountPath: {{ $logDir}}
356 - mountPath: {{ $certDir }}
358 {{- if (include "dcaegen2-services-common.shouldUseCmpv2Certificates" .) -}}
359 {{- include "common.certManager.volumeMountsReadOnly" . | nindent 8 -}}
363 - name: policy-shared
364 mountPath: /etc/policies
366 {{- include "dcaegen2-services-common._externalVolumeMounts" . | nindent 8 }}
368 - image: {{ include "repositoryGenerator.image.logging" . }}
369 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
376 fieldPath: status.podIP
377 resources: {{ include "common.resources" . | nindent 2 }}
379 - mountPath: /var/log/onap/{{ include "common.name" . }}
381 - mountPath: /usr/share/filebeat/data
383 - mountPath: /usr/share/filebeat/filebeat.yml
385 subPath: filebeat.yml
388 - image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.dcaePolicySyncImage }}
389 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
396 fieldPath: status.podIP
397 - name: POLICY_SYNC_PDP_USER
400 name: {{ $policyRls }}-policy-xacml-pdp-api-creds
402 - name: POLICY_SYNC_PDP_PASS
405 name: {{ $policyRls }}-policy-xacml-pdp-api-creds
407 - name: POLICY_SYNC_PDP_URL
408 value : http{{ if (include "common.needTLS" .) }}s{{ end }}://policy-xacml-pdp:6969
409 - name: POLICY_SYNC_OUTFILE
410 value : "/etc/policies/policies.json"
411 - name: POLICY_SYNC_V1_DECISION_ENDPOINT
412 value : "policy/pdpx/v1/decision"
413 {{- if $policy.filter }}
414 - name: POLICY_SYNC_FILTER
415 value: {{ $policy.filter }}
417 {{- if $policy.policyID }}
418 - name: POLICY_SYNC_ID
419 value: {{ $policy.policyID }}
421 {{- if $policy.duration }}
422 - name: POLICY_SYNC_DURATION
423 value: "{{ $policy.duration }}"
425 resources: {{ include "common.resources" . | nindent 2 }}
427 - mountPath: /etc/policies
430 - mountPath: /opt/ca-certificates/
434 hostname: {{ include "common.name" . }}
438 name: {{ include "common.fullname" . }}-application-config-configmap
439 name: app-config-input
450 name: {{ include "common.fullname" . }}-filebeat-configmap
456 {{ if (include "dcaegen2-services-common.shouldUseCmpv2Certificates" .) -}}
457 {{ include "common.certManager.volumesReadOnly" . | nindent 6 }}
461 - name: policy-shared
464 {{- include "common.dmaap.provisioning._volumes" . | nindent 6 -}}
465 {{- include "dcaegen2-services-common._externalVolumes" . | nindent 6 }}
467 - name: "{{ include "common.namespace" . }}-docker-registry-key"
473 Template to attach CertPostProcessor which merges CMPv2 truststore with AAF truststore
474 and swaps keystore files.
476 {{- define "dcaegen2-services-common._certPostProcessor" -}}
477 {{- $certDir := default "" .Values.certDirectory . -}}
478 {{- if (include "dcaegen2-services-common.shouldUseCmpv2Certificates" .) -}}
479 {{- $cmpv2Certificate := (index .Values.certificates 0) -}}
480 {{- $cmpv2CertificateDir := $cmpv2Certificate.mountPath -}}
481 {{- $certType := "pem" -}}
482 {{- if $cmpv2Certificate.keystore -}}
483 {{- $certType = (index $cmpv2Certificate.keystore.outputType 0) -}}
485 {{- $truststoresPaths := printf "%s/%s:%s/%s" $certDir "cacert.pem" $cmpv2CertificateDir "cacert.pem" -}}
486 {{- $truststoresPasswordPaths := ":" -}}
487 {{- $keystoreSourcePaths := printf "%s/%s:%s/%s" $cmpv2CertificateDir "cert.pem" $cmpv2CertificateDir "key.pem" -}}
488 {{- $keystoreDestinationPaths := printf "%s/%s:%s/%s" $certDir "cert.pem" $certDir "key.pem" -}}
489 {{- if not (eq $certType "pem") -}}
490 {{- $truststoresPaths = printf "%s/%s:%s/%s.%s" $certDir "trust.jks" $cmpv2CertificateDir "truststore" $certType -}}
491 {{- $truststoresPasswordPaths = printf "%s/%s:%s/%s" $certDir "trust.pass" $cmpv2CertificateDir "truststore.pass" -}}
492 {{- $keystoreSourcePaths = printf "%s/%s.%s:%s/%s" $cmpv2CertificateDir "keystore" $certType $cmpv2CertificateDir "keystore.pass" -}}
493 {{- $keystoreDestinationPaths = printf "%s/%s.%s:%s/%s.pass" $certDir "cert" $certType $certDir $certType -}}
495 - name: cert-post-processor
496 image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.certPostProcessorImage }}
497 imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
499 {{- include "common.resources" . | nindent 4 }}
501 - mountPath: {{ $certDir }}
503 {{- include "common.certManager.volumeMountsReadOnly" . | nindent 4 }}
505 - name: TRUSTSTORES_PATHS
506 value: {{ $truststoresPaths | quote}}
507 - name: TRUSTSTORES_PASSWORDS_PATHS
508 value: {{ $truststoresPasswordPaths | quote }}
509 - name: KEYSTORE_SOURCE_PATHS
510 value: {{ $keystoreSourcePaths | quote }}
511 - name: KEYSTORE_DESTINATION_PATHS
512 value: {{ $keystoreDestinationPaths | quote }}
517 Template returns string "true" if CMPv2 certificates should be used and nothing (so it can be used in with statements)
518 when they shouldn't. Example use:
519 {{- if (include "dcaegen2-services-common.shouldUseCmpv2Certificates" .) -}}
522 {{- define "dcaegen2-services-common.shouldUseCmpv2Certificates" -}}
523 {{- $certDir := default "" .Values.certDirectory . -}}
524 {{- if (and $certDir .Values.certificates .Values.global.cmpv2Enabled .Values.useCmpv2Certificates) -}}