1 .. ============LICENSE_START==========================================
2 .. ===================================================================
3 .. Copyright © 2017-2018 AT&T Intellectual Property. All rights reserved.
4 .. ===================================================================
5 .. Licensed under the Creative Commons License, Attribution 4.0 Intl. (the "License");
6 .. you may not use this documentation except in compliance with the License.
7 .. You may obtain a copy of the License at
9 .. https://creativecommons.org/licenses/by/4.0/
11 .. Unless required by applicable law or agreed to in writing, software
12 .. distributed under the License is distributed on an "AS IS" BASIS,
13 .. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 .. See the License for the specific language governing permissions and
15 .. limitations under the License.
16 .. ============LICENSE_END============================================
22 .. * This Release Notes must be updated each time the team decides to Release new artifacts.
23 .. * The scope of this Release Notes is for this particular component. In other words, each ONAP component has its Release Notes.
24 .. * This Release Notes is cumulative, the most recently Released artifact is made visible in the top of this Release Notes.
25 .. * Except the date and the version number, all the other sections are optional but there must be at least one section describing the purpose of this new release.
26 .. * This note must be removed after content has been added.
33 :Release Date: 2018-06-07
38 The Beijing release added the following functionality:
40 - Added support for the following LCM actions (a desciption of all of the above LCM actions can be found in the APPC LCM API Guide on readthedoc):
42 - To support in-place software upgrade:
52 - To support storage management in OpenStack
57 - To support Manual Scale Out use case
59 - ConfigScaleOut (more details can be found in teh APPC Epic: `APPC-431 <https://jira.onap.org/browse/APPC-431>`_ )
61 - To support general operations
66 - Contributed the APPC Controller Design Tool (CDT), which enables self-serve capabilities by allowing users to model their VNF/VNFC for consumption by APPC to use in the execution of requests to perform life cycle management activities.
68 - More details on the APPC CDT can be found in the APPC CDT User Guide in readthedocs.
69 - Additional information on how the APPC CDT tool was used to model the vLB and build teh artifacts needed by APPC to execute teh ConfigScaleOut action can be found at the following wiki pages: https://wiki.onap.org/pages/viewpage.action?pageId=33065185
71 - Additional contributions as part of Beijing include:
73 - Support for Platform Maturity requirements, including:
77 - Added security to ODL web-based API access via AAF (see `APPC-404 <https://jira.onap.org/browse/APPC-404>`_ for additional details)
78 - Addressed critical alerts reported via Nexus IQ to the extent possible (see `APPC-656 <https://jira.onap.org/browse/APPC-656>`_ )
82 - Executed 72 hour stability test on both Heat and OOM deployed environments using JMeter to drive a steady set of transactions over the 72 hour period (see the following wiki page for more details: https://wiki.onap.org/display/DW/ONAP+APPC+72+Hour+Stability+Test+Results )
86 - Support for OOM deployment, which enables resiliency via use of Kubernetes (see `APPC-414 <https://jira.onap.org/browse/APPC-414>`_ for additional details)
88 - Upgraded OpenDaylight (ODL) version to Nitrogen
95 The following defects that were documented as known issues in Amsterdam have been fixed in Beijing release:
97 - `APPC-316 <https://jira.onap.org/browse/APPC-316>`_ - Null payload issue for Stop Application
99 - `APPC-315 <https://jira.onap.org/browse/APPC-315>`_ - appc-request-handler is giving error java.lang.NoClassDefFoundError
101 - `APPC-312 <https://jira.onap.org/browse/APPC-312>`_ - APPC request is going to wrong request handler and rejecting request
103 - `APPC-311 <https://jira.onap.org/browse/APPC-311>`_ - The APPC LCM Provider Healthcheck
105 - `APPC-309 <https://jira.onap.org/browse/APPC-309>`_ - APPC LCM Provider URL missing in appc.properties.
107 - `APPC-307 <https://jira.onap.org/browse/APPC-307>`_ - Embed jackson-annotations dependency in appc-dg-common during run-time
109 - `APPC-276 <https://jira.onap.org/browse/APPC-276>`_ - Some Junit are breaking convention causing excessively long build
111 - `APPC-248 <https://jira.onap.org/browse/APPC-248>`_ - There is an compatibility issue between PowerMock and Jacoco which causes Sonar coverage not to be captured. Fix is to move to Mockito.
116 The following issues remain open at the end of Beijing release. Please refer to Jira for further details and workaround, if available.
118 - `APPC-987 <https://jira.onap.org/browse/APPC-987>`_ - APPC Investigate TRANSACTION Table Aging. See **Other** section for further information
120 - `APPC-977 <https://jira.onap.org/browse/APPC-977>`_ - Procedures needed for enabling AAF support in OOM. See **Other** section for further information
122 - `APPC-973 <https://jira.onap.org/browse/APPC-973>`_ - Fix delimiter string for xml-download CDT action
124 - `APPC-940 <https://jira.onap.org/browse/APPC-940>`_ - APPC CDT Tool is not updating appc_southbound.properties with the URL supplied for REST
126 - `APPC-929 <https://jira.onap.org/browse/APPC-929>`_ - LCM API - ConfigScaleOut- Payload parameter to be manadatory set to "true"
128 - `APPC-912 <https://jira.onap.org/browse/APPC-912>`_ - MalformedChunkCodingException in MDSALStoreImpl.getNodeName
130 - `APPC-892 <https://jira.onap.org/browse/APPC-892>`_ - Cntl+4 to highlight and replace feature-Textbox is accepting space and able to submit without giving any value
132 - `APPC-869 <https://jira.onap.org/browse/APPC-869>`_ - VM Snapshot error occurs during image validation.
134 - `APPC-814 <https://jira.onap.org/browse/APPC-814>`_ - Update openecomp-tosca-datatype namespace
136 - `APPC-340 <https://jira.onap.org/browse/APPC-340>`_ - APPC rejecting request even for decimal of millisecond timestamp difference
138 - `APPC-154 <https://jira.onap.org/browse/APPC-154>`_ - Logging issue - Request REST API of APPC has RequestID (MDC) in Body or Payload section instead of Header.
143 APPC code has been formally scanned during build time using NexusIQ and all Critical vulnerabilities have been addressed, items that remain open have been assessed for risk and determined to be false positive. The APPC open Critical security vulnerabilities and their risk assessment have been documented as part of the `project <https://wiki.onap.org/pages/viewpage.action?pageId=25438971>`_.
145 Additionally, communication over DMaaP currently does not use secure topics in this release. This has dependency on DMaaP to enable.
149 - `APPC project page <https://wiki.onap.org/display/DW/Application+Controller+Project>`_
151 - `Passing Badge information for APPC <https://bestpractices.coreinfrastructure.org/en/projects/1579>`_
153 - `Project Vulnerability Review Table for APPC <https://wiki.onap.org/pages/viewpage.action?pageId=25438971>`_
157 - Limitations, Constraints and other worthy notes
159 - An issue was discovered with usage of AAF in an OOM deployed environment after the Beijing release was created. The issue was twofold (tracked under `APPC-977 <https://jira.onap.org/browse/APPC-977>`_):
161 - Needed APPC configuration files were missing in Beijing OOM , and
162 - AAF updated their certificates to require 2way certs, which requires APPC updates
164 Additionally, in a Heat deployed environment, a manual workaround will be required to authorize with AAF if they are using 2way certificates. For instruction on workaround steps needed depending on type of deployment, please refer to the following wiki: https://wiki.onap.org/display/DW/AAF+Integration+with+APPC.
166 - During the testing of the vCPE/vMUX closed loop scenarios in an OOM deployed environment, an issue was encountered where transactions were not being deleted from the TRANSACTION table and was blocking other Restart request from completing successfully (tracked under `APPC-987 <https://jira.onap.org/browse/APPC-987>`_). A workaround is available and documented in the Jira ticket.
168 - It is impossible for us to test all aspect of the application. Scope of testing done in Beijing is captured on the following wiki: https://wiki.onap.org/display/DW/APPC+Beijing+Testing+Scope+and+Status
170 - Currently APPC only supports OpenStack
172 - OpenStack Hypervisorcheck is turned off by default. If you want to invoke this functionality via the appc.properties, you need to enable it and ensure you have Admin level access to OpenStack.
174 - Integration with MultiCloud is supported for Standalone Restart (i.e., not via DGOrchestrator). For any other action, such as Stop, Start, etc.. via MultiCloud requires the MultiCloud identity URL to be either passed in the payload or defined in appc.properties.
176 - APPC needs Admin level access for Tenant level operations.
178 - Currently, the "ModifyConfig" API and the implementation in the Master Directed Graph is only designed to work with the vFW Closed-Loop Demo.
184 :Release Date: 2017-11-16
189 The Amsterdam release continued evolving the design driven architecture of and functionality for APPC.
190 APPC aims to be completely agnostic and make no assumption about the network.
192 The main goal of the Amsterdam release was to:
193 - Support the vCPE use case as part of the closed loop action to perform a Restart on the vGMUX
194 - Demonstrate integration with MultiCloud as a proxy to OpenStack
195 - Continue supporting the vFW closed loop use case as part of regression from the seed contribution.
197 Other key features added in this release include:
198 - Support for Ansible
199 - The Ansible Extension for APP-C allows management of VNFs that support Ansible. Ansible is a an open-source VNF management framework that provides an almost cli like set of tools in a structured form. APPC supports Ansible through the following three additions: An Ansible server interface, Ansible Adapter, and Ansible Directed Graph.
201 - The Chef Extension for APPC allows management of VNFs that support Chef through the following two additions: a Chef Adapter and Chef Directed Graph.
202 - LifeCycle Management (LCM) APIs via standalone DGs or via the DGOrchestrator architecture to trigger actions on VMs, VNFs, or VNFCs
203 - OAM APIs to manage the APPC application itself
204 - Upgrade of OpenDaylight to Carbon version
210 - This is technically the first release of APPC, previous release was the seed code contribution. As such, the defects fixed in this release were raised during the course of the release. Anything not closed is captured below under Known Issues. If you want to review the defects fixed in the Amsterdam release, refer to `Jira <https://jira.onap.org/issues/?filter=10570&jql=project%20%3D%20APPC%20AND%20issuetype%20%3D%20Bug%20AND%20status%20%3D%20Closed%20AND%20fixVersion%20%3D%20%22Amsterdam%20Release%22>`_.
212 - Please also refer to the notes below. Given the timeframe and resource limitations, not all functions of the release could be validated. Items that were validated are documented on the wiki at the link provide below. If you find issues in the course of your work with APPC, please open a defect in the Application Controller project of Jira (jira.onpa.org)
216 - `APPC-312 <https://jira.onap.org/browse/APPC-312>`_ - APPC request is going to wrong request handler and rejecting request. Configure request failing with following error: ``REJECTED Action Configure is not supported on VM level``.
218 - `APPC-311 <https://jira.onap.org/browse/APPC-311>`_ - The APPC LCM Provider Healthcheck, which does a healthceck on a VNF, is failing. No known workaround at this time.
220 - `APPC-309 <https://jira.onap.org/browse/APPC-309>`_ - The property: ``appc.LCM.provider.url=http://127.0.0.1:8181/restconf/operations/appc-provider-lcm`` is missing from appc.properties in the appc deployment. The property can be manually added as a workaround, then bounce the appc container.
222 - `APPC-307 <https://jira.onap.org/browse/APPC-307>`_ - Missing jackson-annotations dependency in appc-dg-common - This issue results in Rebuild operation via the APPC Provider not to work. Use instead Rebuild via the APPC LCM Provider using DGOrchestrator.
224 - `APPC-276 <https://jira.onap.org/browse/APPC-276>`_ - A number of junit testcases need to be reworked because they are causing APPC builds to take much longer to complete. This issue does not cause the build to fail, just take longer. You can comment out these junit in your local build if this is a problem.
226 - `APPC-248 <https://jira.onap.org/browse/APPC-248>`_ - There is an compatibility issue between PowerMock and Jacoco which causes Sonar coverage not to be captured. There is no functional impact on APPC.
228 - `APPC-154 <https://jira.onap.org/browse/APPC-154>`_ - Logging issue - Request REST API of APPC has RequestID (MDC) in Body or Payload section instead of Header.
232 - Communication over DMaaP currently does not use secure topics in this release.
233 - AAF is deactivated by default in this release and was not validated or committed as part of the Amsterdam Release.
238 - Limitations, Constraints and other worthy notes
240 - LCM Healthcheck and Configure actions do not work.
241 - The APPC actions validated in this release are captured here: https://wiki.onap.org/display/DW/APPC+Testing+Scope+and+Status
242 - Currently APPC only supports OpenStack
243 - OpenStack Hypervisorcheck is turned off by default. If you want to invoke this functionality via the appc.properties, you need to enable it and ensure you have Admin level access to OpenStack.
244 - Integration with MultiCloud is supported for Standalone Restart (i.e., not via DGOrchestrator). For any other action, such as Stop, Start, etc.. via MultiCloud requires the MultiCloud identity URL to be either passed in the payload or defined in appc.properties.
245 - APPC needs Admin level access for Tenant level operations.
246 - Currently, if DGs are modified in appc.git repo, they must be manually moved to the appc/deployment repo.
247 - Currently, the "ModifyConfig" API and the implementation in the Master Directed Graph is only designed to work with the vFW Closed-Loop Demo.