2 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
3 .. http://creativecommons.org/licenses/by/4.0
5 **********************************************************
6 Control Loop Simulation and Injection of Messages Overview
7 **********************************************************
12 This section will cover how to interact with the PDP-D using telemetry commands. This assumes that you have a PDP-D running to interact with. Take a look at the page "Methods to run PDP-D" if you do not have a PDP-D running for testing purposes.
16 The username and password for the Telemetry commands are in *${POLICY_HOME}/config/engine.properties*.
17 If you are using Eclipse, the credentials can be found in the file **install-drools/src/files/base.conf** within the "drools-pdp" repository.
18 The environment variables $TELEMETRY_USER and $TELEMETRY_PASSWORD will also have the credentials if they have already been set.
20 Recall you can use the command "docker exec -it drools bash" to get the PDP-D running with Docker.
24 docker exec -it drools bash
26 Your terminal should now look similar to "policy@drools:/<path>". This indicates you are in the drools docker container. If you run "policy status" the controller should be running.
28 .. image:: img/docker/policyStatus.png
30 To enter the telemetry subshell, use the command "telemetry".
36 Use the "exit" command to exit the telemetry subshell. The terminal will now go back to the docker container.
42 .. image:: img/docker/credentials.png
47 To inject messages, use the following command. The injected message will look as if it came in from the specified topic and will be processed accordingly.
53 http --verify=no --default-scheme=https -a <userName>:<password> PUT :9696/policy/pdp/engine/topics/sources/<comm>/<topic>/events @<onsetFile> Content-Type:"text/plain"
55 The equivalent "curl" version:
59 curl --insecure --silent --user <userName>:<password> -X PUT --header "Content-Type: text/plain" --data @<onsetFile> https://localhost:9696/policy/pdp/engine/topics/sources/<comm>/<topic>/events
61 Note: you may have to replace "https" with "http" depending on how you are running the drools-pdp.
63 The <comm> is a messaging communication infrastructure in an ONAP installation. Depending on how a topic has been defined in the configuration, the <comm> is either "dmaap", "ueb", or "noop".
64 The default messaging communication infrastructure is "dmaap".
66 The <topic> is a specific topic name used to send and/or receive information. There are two types of topics:
68 1. **source** topics (Example: dmaap.source.topics=APPC-LCM-WRITE or dmaap.source.topics=APPC-CL)
70 2. **sink** topics (Example: dmaap.sink.topics=APPC-LCM-READ or dmaap.sink.topics=APPC-CL)
72 You can extract <comm> and <topic> from the following example:
73 Example: dmaap.sink.topics=APPC-LCM-READ
77 2. <topic>=APPC-LCM-READ
79 The onset is a json file that contains the data to inject as the onset. The data contained depends on the use case. This is an example for the vFirewall usecase:
82 :caption: vFirewall_Sample_Onset
85 "closedLoopControlName": "ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a",
86 "closedLoopAlarmStart": 1463679805324,
87 "closedLoopEventClient": "microservice.stringmatcher",
88 "closedLoopEventStatus": "ONSET",
89 "requestID": "c7c6a4aa-bb61-4a15-b831-ba1472dd4a65",
91 "target": "generic-vnf.vnf-name",
93 "vserver.is-closed-loop-disabled": "false",
94 "vserver.prov-status": "ACTIVE",
95 "generic-vnf.vnf-name": "fw0002vm002fw002",
96 "vserver.vserver-name": "OzVServer"
105 To get the name(s) of the active controller(s), use:
109 curl --insecure --silent --user <username>:<password> -X GET https://localhost:9696/policy/pdp/engine/controllers | python -m json.tool
111 # Example output when running PDP-D with Docker:
113 policy@drools:/opt/app/policy/config$ echo $TELEMETRY_USER
115 demo@people.osaaf.org
117 policy@drools:/opt/app/policy/config$ echo $TELEMETRY_PASSWORD
121 policy@drools:/opt/app/policy/config$ curl --insecure --silent --user demo@people.osaaf.org:demo123456! -X GET https://localhost:9696/policy/pdp/engine/controllers | python -m json.tool
127 To check the facts currently in working memory, use the following command.
131 curl --insecure --silent --user <username>:<password> -X GET https://localhost:9696/policy/pdp/engine/controllers/<controllerName>/drools/facts | python -m json.tool
135 policy@drools:/opt/app/policy/config$ curl --insecure --silent --user demo@people.osaaf.org:demo123456! -X GET https://localhost:9696/policy/pdp/engine/controllers/frankfurt/drools/facts/ | python -m json.tool
139 policy@drools:/opt/app/policy/config$ curl --insecure --silent --user demo@people.osaaf.org:demo123456! -X GET https://localhost:9696/policy/pdp/engine/controllers/usecases/drools/facts/ | python -m json.tool
144 To get additional information about the controller, use:
148 curl --insecure --silent --user <username>:<password> -X GET https://localhost:9696/policy/pdp/engine/controllers/<controllerName> | python -m json.tool
152 policy@drools:/opt/app/policy/config$ curl --insecure --silent --user demo@people.osaaf.org:demo123456! -X GET https://localhost:9696/policy/pdp/engine/controllers/frankfurt/ | python -m json.tool
158 "effectiveTopic": "APPC-CL",
159 "topicCommInfrastructure": "NOOP",
169 "effectiveTopic": "APPC-LCM-READ",
170 "topicCommInfrastructure": "NOOP",
175 "topic": "APPC-LCM-READ",
180 "effectiveTopic": "POLICY-CL-MGT",
181 "topicCommInfrastructure": "NOOP",
186 "topic": "POLICY-CL-MGT",
191 "effectiveTopic": "SDNR-CL",
192 "topicCommInfrastructure": "NOOP",
202 "effectiveTopic": "DCAE_CL_RSP",
203 "topicCommInfrastructure": "NOOP",
208 "topic": "DCAE_CL_RSP",
219 "groupId": "org.onap.policy.drools-applications.controlloop.common",
220 "recentSourceEvents": [],
222 "modelClassLoaderHash": -1185895883,
224 "onap.policies.controlloop.operational.common.Drools",
225 "onap.policies.controlloop.Operational"
227 "artifactId": "controller-frankfurt",
228 "recentSinkEvents": [],
229 "sessionCoordinates": [
230 "org.onap.policy.drools-applications.controlloop.common:controller-frankfurt:1.6.0:frankfurt"
236 "name": "onap.policies.controlloop.operational.common.Drools",
240 "name": "onap.policies.controlloop.Operational",
247 "effectiveTopic": "DCAE_TOPIC",
248 "topicCommInfrastructure": "NOOP",
253 "topic": "DCAE_TOPIC",
258 "effectiveTopic": "APPC-CL",
259 "topicCommInfrastructure": "NOOP",
269 "effectiveTopic": "APPC-LCM-WRITE",
270 "topicCommInfrastructure": "NOOP",
275 "topic": "APPC-LCM-WRITE",
280 "effectiveTopic": "SDNR-CL-RSP",
281 "topicCommInfrastructure": "NOOP",
286 "topic": "SDNR-CL-RSP",
293 Within the telemetry subshell, it is easy to get information. Simply navigate to a specific directory using "cd". Use the "get" command to get information. This is a shorter alternatve to using the "curl" requests as shown above.
295 To get information about the engine:
297 .. image:: img/docker/getEngine.png
299 To list the names of the active controllers:
301 .. image:: img/docker/getControllers.png
303 To get information about the specific "frankfurt" controller:
305 .. image:: img/docker/getFrankfurt.png
307 To get information about the PDP-D environment:
309 .. image:: img/docker/getEnvironment.png
311 To get a list of features that are currently enabled:
313 .. image:: img/docker/getFeatures.png
318 Currently, there are 4 supported simulators: A&AI, SO, vFC, and guard. When they are up, they are accessed via localhost on the following ports:
320 1. A&AI - localhost:6666
322 2. SO - localhost:6667
324 3. vFC - localhost:6668
326 4. guard - localhost:6669
329 They all respond with hard-coded values representing their various success messages except for with certain inputs. For the A&AI simulator, if the value being queried with a “GET” query is “getFail” the simulator returns an exception message, if the value being queried in a “GET” query is “disableClosedLoop” the simulator returns a response with the value of “is-closed-loop-disabled” set to true, and if the value being queried in a named query is “error” the response from the simulator is A&AI’s failure message.
331 The other simulator that can return multiple responses is the guard simulator, and that returns a deny response if the closed loop control name passed in is “denyGuard”.
336 To check the status of the simulators, run the command: "*policy status*". If the feature "controlloop-utils" is enabled, the simulators are being used, otherwise, they are not.
338 **Turning on the simulators**
340 - First, make sure the controller is off by running the command “*policy stop*”.
341 - Then turn the feature on with the command “*features enable controlloop-utils*”.
342 - Finally restart the controller by running “*policy start*”.
343 - Run “*features status*” again and the *feature controlloop-utils* will be **enabled**.
345 **Turning the simulators off**
347 - First, make sure the controller is off by running the command “*policy stop*”.
348 - Then turn the feature off with the command “*features disable controlloop-utils*”.
349 - Finally restart the controller by running “*policy start*”.
350 - Run “*features status*” again and the *feature controlloop-utils* will be **disabled**.
354 For Junits, the package *org.onap.policy.simulators* is needed. In the Util class, there are six methods to start the six different simulators: *buildAaiSim()*, *buildSoSim()*, *buildVfcSim()*, *buildGuardSim()*, *buildSdnc()*, and *buildDmaap()*. Once the method is called, the simulator should be up and waiting to respond to requests. To bring down the simulators, call *HttpServletServer.factory.destroy()*.
363 :caption: vnf-GET-response
366 "vnf-id": vnfId, // vnfId will be the vnfId you query on. If you query on a vnfName, the id will be "error" if the name is "error", "5e49ca06-2972-4532-9ed4-6d071588d792" otherwise
367 "vnf-name": vnfName, // vnfName will be the vnfName you query on. If you query on a vnfId, the name will be "USUCP0PCOIL0110UJRT01"
369 "service-id": "d7bb0a21-66f2-4e6d-87d9-9ef3ced63ae4",
370 "equipment-role": "UCPE",
371 "orchestration-status": "created",
372 "management-option": "ATT",
373 "ipv4-oam-address": "32.40.68.35",
374 "ipv4-loopback0-address": "32.40.64.57",
375 "nm-lan-v6-address": "2001:1890:e00e:fffe::1345",
376 "management-v6-address": "2001:1890:e00e:fffd::36",
378 "prov-status":"ACTIVE",
379 "is-closed-loop-disabled": isDisabled, // isDisabled will be true if the vnf name/Id you query on is disableClosedLoop, false otherwise
380 "resource-version": "1493389458092",
381 "relationship-list": {
383 "related-to": "service-instance",
384 "related-link": "/aai/v11/business/customers/customer/1610_Func_Global_20160817084727/service-subscriptions/service-subscription/uCPE-VMS/service-instances/service-instance/USUCP0PCOIL0110UJZZ01",
385 "relationship-data": [{
386 "relationship-key": "customer.global-customer-id",
387 "relationship-value": "1610_Func_Global_20160817084727"
389 "relationship-key": "service-subscription.service-type",
390 "relationship-value": "uCPE-VMS"
392 "relationship-key": "service-instance.service-instance-id",
393 "relationship-value": "USUCP0PCOIL0110UJZZ01"
395 "related-to-property": [{
396 "property-key": "service-instance.service-instance-name"
399 "related-to": "vserver",
400 "related-link": "/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/att-aic/AAIAIC25/tenants/tenant/USUCP0PCOIL0110UJZZ01%3A%3AuCPE-VMS/vservers/vserver/3b2558f4-39d8-40e7-bfc7-30660fb52c45",
401 "relationship-data": [{
402 "relationship-key": "cloud-region.cloud-owner",
403 "relationship-value": "att-aic"
405 "relationship-key": "cloud-region.cloud-region-id",
406 "relationship-value": "AAIAIC25"
408 "relationship-key": "tenant.tenant-id",
409 "relationship-value": "USUCP0PCOIL0110UJZZ01::uCPE-VMS"
411 "relationship-key": "vserver.vserver-id",
412 "relationship-value": "3b2558f4-39d8-40e7-bfc7-30660fb52c45"
414 "related-to-property": [{
415 "property-key": "vserver.vserver-name",
416 "property-value": "USUCP0PCOIL0110UJZZ01-vsrx"
423 :caption: vnf-GET-fail
425 // This is returned if you query on the value "getFail"
428 "serviceException": {
429 "messageId": "SVC3001",
430 "text": "Resource not found for %1 using id %2 (msg=%3) (ec=%4)",
431 "variables": ["GET", "network/generic-vnfs/generic-vnf/getFail", "Node Not Found:No Node of type generic-vnf found at network/generic-vnfs/generic-vnf/getFail", "ERR.5.4.6114"]
438 :caption: vserver-GET-response
442 "vserver-id": "d0668d4f-c25e-4a1b-87c4-83845c01efd8",
443 "vserver-name": vserverName, // The value you query on
444 "vserver-name2": "vjunos0",
445 "vserver-selflink": "https://aai-ext1.test.att.com:8443/aai/v7/cloud-infrastructure/cloud-regions/cloud-region/att-aic/AAIAIC25/tenants/tenant/USMSO1SX7NJ0103UJZZ01%3A%3AuCPE-VMS/vservers/vserver/d0668d4f-c25e-4a1b-87c4-83845c01efd8",
447 "prov-status":"ACTIVE",
448 "is-closed-loop-disabled": isDisabled, // True if the vserverName is "disableClosedLoop", false otherwise
449 "resource-version": "1494001931513",
450 "relationship-list": {
452 "related-to": "generic-vnf",
453 "related-link": "/aai/v11/network/generic-vnfs/generic-vnf/e1a41e99-4ede-409a-8f9d-b5e12984203a",
454 "relationship-data": [{
455 "relationship-key": "generic-vnf.vnf-id",
456 "relationship-value": "e1a41e99-4ede-409a-8f9d-b5e12984203a"
458 "related-to-property": [{
459 "property-key": "generic-vnf.vnf-name",
460 "property-value": "USMSO1SX7NJ0103UJSW01"
463 "related-to": "pserver",
464 "related-link": "/aai/v11/cloud-infrastructure/pservers/pserver/USMSO1SX7NJ0103UJZZ01",
465 "relationship-data": [{
466 "relationship-key": "pserver.hostname",
467 "relationship-value": "USMSO1SX7NJ0103UJZZ01"
469 "related-to-property": [{
470 "property-key": "pserver.pserver-name2"
479 :caption: vserver-GET-error
481 // This is returned if you query on the value "getFail"
484 "serviceException": {
485 "messageId": "SVC3001",
486 "text": "Resource not found for %1 using id %2 (msg=%3) (ec=%4)",
487 "variables": ["GET", "nodes/vservers", "Node Not Found:No Node of type generic-vnf found at nodes/vservers", "ERR.5.4.6114"]
494 :caption: vnf-NamedQuery-response
497 "inventory-response-item": [
499 "model-name": "service-instance",
501 "vnf-id": "vnfId", //vnfId will be the vnfId you query on
502 "vnf-name": "ZRDM2MMEX39",
503 "vnf-type": "vMME Svc Jul 14/vMME VF Jul 14 1",
504 "service-id": "a9a77d5a-123e-4ca2-9eb9-0b015d2ee0fb",
505 "prov-status": "ACTIVE",
507 "is-closed-loop-disabled": false,
508 "resource-version": "1503082370097",
509 "model-invariant-id": "82194af1-3c2c-485a-8f44-420e22a9eaa4",
510 "model-version-id": "46b92144-923a-4d20-b85a-3cbd847668a9"
512 "extra-properties": {
515 "inventory-response-items": {
516 "inventory-response-item": [
518 "model-name": "service-instance",
519 "service-instance": {
520 "service-instance-id": "37b8cdb7-94eb-468f-a0c2-4e3c3546578e",
521 "service-instance-name": "Changed Service Instance NAME",
522 "resource-version": "1503082993532",
523 "model-invariant-id": "82194af1-3c2c-485a-8f44-420e22a9eaa4",
524 "model-version-id": "46b92144-923a-4d20-b85a-3cbd847668a9"
526 "extra-properties": {
529 "inventory-response-items": {
530 "inventory-response-item": [
534 "vnf-id": "pnfVnfId", // pnfVnfId is UUID generated from ${pnfVnfName}
535 "vnf-name": "pnfVnfName", // pnfVnfName is pnf-test-${vnfId}
536 "vnf-type": "vMME Svc Jul 14/vMME VF Jul 14 1",
537 "service-id": "a9a77d5a-123e-4ca2-9eb9-0b015d2ee0fb",
539 "is-closed-loop-disabled": false,
540 "resource-version": "1504013830207",
541 "model-invariant-id": "862b25a1-262a-4961-bdaa-cdc55d69785a",
542 "model-version-id": "e9f1fa7d-c839-418a-9601-03dc0d2ad687"
544 "extra-properties": {
549 "model-name": "service-instance",
551 "vnf-id": "serviceInstanceVnfId", // serviceInstanceVnfId is UUID generated from ${serviceInstanceVnfName}
552 "vnf-name": "serviceInstanceVnfName", // serviceInstanceVnfName is service-instance-test-${vnfId}
553 "vnf-type": "vMME Svc Jul 14/vMME VF Jul 14 1",
554 "service-id": "a9a77d5a-123e-4ca2-9eb9-0b015d2ee0fb",
556 "is-closed-loop-disabled": false,
557 "resource-version": "1504014833841",
558 "model-invariant-id": "Eace933104d443b496b8.nodes.heat.vpg",
559 "model-version-id": "46b92144-923a-4d20-b85a-3cbd847668a9"
561 "extra-properties": {
576 :caption: vserver-NamedQuery-response
579 "inventory-response-item": [
582 "vserver-id": "6ed3642c-f7a1-4a7c-9290-3d51fe1531eb",
583 "vserver-name": "zdfw1lb01lb02",
584 "vserver-name2": "zdfw1lb01lb02",
585 "prov-status": "ACTIVE",
586 "vserver-selflink": "http://10.12.25.2:8774/v2.1/41d6d38489bd40b09ea8a6b6b852dcbd/servers/6ed3642c-f7a1-4a7c-9290-3d51fe1531eb",
588 "is-closed-loop-disabled": false,
589 "resource-version": "1510606403522"
591 "extra-properties": {
594 "inventory-response-items": {
595 "inventory-response-item": [
597 "model-name": "vLoadBalancer",
599 "vnf-id": "db373a8d-f7be-4d02-8ac8-6ca4c305d144",
600 "vnf-name": "Vfmodule_vLB1113",
601 "vnf-type": "vLoadBalancer-1106/vLoadBalancer 0",
602 "service-id": "66f157fc-4148-4880-95f5-e120677e98d1",
603 "prov-status": "PREPROV",
605 "is-closed-loop-disabled": false,
606 "resource-version": "1510604011851",
607 "model-invariant-id": "cee050ed-92a5-494f-ab04-234307a846dc",
608 "model-version-id": "fd65becc-6b2c-4fe8-ace9-cc29db9a3da2"
610 "extra-properties": {
613 "property-name": "model-ver.model-version-id",
614 "property-value": "fd65becc-6b2c-4fe8-ace9-cc29db9a3da2"
617 "property-name": "model-ver.model-name",
618 "property-value": "vLoadBalancer"
621 "property-name": "model.model-type",
622 "property-value": "resource"
625 "property-name": "model.model-invariant-id",
626 "property-value": "cee050ed-92a5-494f-ab04-234307a846dc"
629 "property-name": "model-ver.model-version",
630 "property-value": "1.0"
634 "inventory-response-items": {
635 "inventory-response-item": [
637 "model-name": "vLoadBalancer-1106",
638 "service-instance": {
639 "service-instance-id": "3b12f31f-8f2d-4f5c-b875-61ff1194b941",
640 "service-instance-name": "vLoadBalancer-1113",
641 "resource-version": "1510603936425",
642 "model-invariant-id": "1321d60d-f7ff-4300-96c2-6bf0b3268b7a",
643 "model-version-id": "732d4692-4b97-46f9-a996-0b3339e88c50"
645 "extra-properties": {
648 "property-name": "model-ver.model-version-id",
649 "property-value": "732d4692-4b97-46f9-a996-0b3339e88c50"
652 "property-name": "model-ver.model-name",
653 "property-value": "vLoadBalancer-1106"
656 "property-name": "model.model-type",
657 "property-value": "service"
660 "property-name": "model.model-invariant-id",
661 "property-value": "1321d60d-f7ff-4300-96c2-6bf0b3268b7a"
664 "property-name": "model-ver.model-version",
665 "property-value": "1.0"
671 "model-name": "Vloadbalancer..base_vlb..module-0",
673 "vf-module-id": "e6b3e3eb-34e1-4c00-b8c1-2a4fbe479b12",
674 "vf-module-name": "Vfmodule_vLB1113-1",
675 "heat-stack-id": "Vfmodule_vLB1113-1/3dd6d900-772f-4fcc-a0cb-e250ab2bb4db",
676 "orchestration-status": "active",
677 "is-base-vf-module": true,
678 "resource-version": "1510604612557",
679 "model-invariant-id": "6d760188-9a24-451a-b05b-e08b86cb94f2",
680 "model-version-id": "93facad9-55f2-4fe0-9574-814c2bc2d071"
682 "extra-properties": {
685 "property-name": "model-ver.model-version-id",
686 "property-value": "93facad9-55f2-4fe0-9574-814c2bc2d071"
689 "property-name": "model-ver.model-name",
690 "property-value": "Vloadbalancer..base_vlb..module-0"
693 "property-name": "model.model-type",
694 "property-value": "resource"
697 "property-name": "model.model-invariant-id",
698 "property-value": "6d760188-9a24-451a-b05b-e08b86cb94f2"
701 "property-name": "model-ver.model-version",
702 "property-value": "1"
708 "model-name": "Vloadbalancer..dnsscaling..module-1",
710 "vf-module-id": "dummy_db373a8d-f7be-4d02-8ac8-6ca4c305d144",
711 "vf-module-name": "dummy_db373a8d-f7be-4d02-8ac8-6ca4c305d144",
712 "is-base-vf-module": false,
713 "resource-version": "1510610079687",
714 "model-invariant-id": "356a1cff-71f2-4086-9980-a2927ce11c1c",
715 "model-version-id": "6b93d804-cfc8-4be3-92cc-9336d135859a"
717 "extra-properties": {
720 "property-name": "model-ver.model-version-id",
721 "property-value": "6b93d804-cfc8-4be3-92cc-9336d135859a"
724 "property-name": "model-ver.model-name",
725 "property-value": "Vloadbalancer..dnsscaling..module-1"
728 "property-name": "model.model-type",
729 "property-value": "resource"
732 "property-name": "model.model-invariant-id",
733 "property-value": "356a1cff-71f2-4086-9980-a2927ce11c1c"
736 "property-name": "model-ver.model-version",
737 "property-value": "1"
743 "model-name": "Vloadbalancer..dnsscaling..module-1",
745 "vf-module-id": "my_module_db373a8d-f7be-4d02-8ac8-6ca4c305d144",
746 "vf-module-name": "my_module_1",
747 "is-base-vf-module": false,
748 "resource-version": "1510610079687",
749 "model-invariant-id": "356a1cff-71f2-4086-9980-a2927ce11c1c",
750 "model-version-id": "6b93d804-cfc8-4be3-92cc-9336d135859a"
752 "extra-properties": {
755 "property-name": "model-ver.model-version-id",
756 "property-value": "6b93d804-cfc8-4be3-92cc-9336d135859a"
759 "property-name": "model-ver.model-name",
760 "property-value": "Vloadbalancer..dnsscaling..module-1"
763 "property-name": "model.model-type",
764 "property-value": "resource"
767 "property-name": "model.model-invariant-id",
768 "property-value": "356a1cff-71f2-4086-9980-a2927ce11c1c"
771 "property-name": "model-ver.model-version",
772 "property-value": "1"
778 "model-name": "Vloadbalancer..dnsscaling..module-1",
780 "vf-module-id": "my_module_db373a8d-f7be-4d02-8ac8-6ca4c305d144",
781 "vf-module-name": "my_module_2",
782 "is-base-vf-module": false,
783 "resource-version": "1510610079687",
784 "model-invariant-id": "356a1cff-71f2-4086-9980-a2927ce11c1c",
785 "model-version-id": "6b93d804-cfc8-4be3-92cc-9336d135859a"
787 "extra-properties": {
790 "property-name": "model-ver.model-version-id",
791 "property-value": "6b93d804-cfc8-4be3-92cc-9336d135859a"
794 "property-name": "model-ver.model-name",
795 "property-value": "Vloadbalancer..dnsscaling..module-1"
798 "property-name": "model.model-type",
799 "property-value": "resource"
802 "property-name": "model.model-invariant-id",
803 "property-value": "356a1cff-71f2-4086-9980-a2927ce11c1c"
806 "property-name": "model-ver.model-version",
807 "property-value": "1"
817 "tenant-id": "41d6d38489bd40b09ea8a6b6b852dcbd",
818 "tenant-name": "Integration-SB-00",
819 "resource-version": "1509587770200"
821 "extra-properties": {
824 "inventory-response-items": {
825 "inventory-response-item": [
828 "cloud-owner": "CloudOwner",
829 "cloud-region-id": "RegionOne",
830 "cloud-region-version": "v1",
831 "resource-version": "1509587770092"
833 "extra-properties": {
848 :caption: NamedQuery-error
850 // This is returned if you query the value "error"
853 "serviceException": {
854 "messageId": "SVC3001",
855 "text": "Resource not found for %1 using id %2 (msg=%3) (ec=%4)",
856 "variables": ["POST Search", "getNamedQueryResponse", "Node Not Found:No Node of type generic-vnf found for properties", "ERR.5.4.6114"]
866 :caption: SO-response
869 "requestReferences": {
870 "requestId":"3e074e0e-5468-48f2-9226-51039d30fe5d" // randomly generated UUID
873 "requestId":"a8f58372-aab2-45b8-9d36-c7a42e701c29", // randomly generated UUID
876 "requestState":"COMPLETE",
877 "wasRolledBack":false
889 :caption: vFC-POST-response
897 :caption: vFC-GET-response
900 "jobId": jobId, //The jod id that you query
901 "responseDescriptor": {
903 "status": "finished",
904 "statusDescription": "OMC VMs are decommissioned in VIM",
907 "responseHistoryList": [{
909 "status": "proccessing",
910 "statusDescription": "OMC VMs are decommissioned in VIM",
915 "status": "proccessing",
916 "statusDescription": "OMC VMs are decommissioned in VIM",
928 :caption: permit-response
931 "decision": "PERMIT",
932 "details": "Decision Permit. OK!"
937 :caption: deny-response
939 // This is returned if the closed loop name is denyGuard
942 "details": "Decision Deny. You asked for it"